diff options
Diffstat (limited to 'target/linux/generic-2.6/files/crypto/ocf/ChangeLog')
| -rw-r--r-- | target/linux/generic-2.6/files/crypto/ocf/ChangeLog | 1960 |
1 files changed, 0 insertions, 1960 deletions
diff --git a/target/linux/generic-2.6/files/crypto/ocf/ChangeLog b/target/linux/generic-2.6/files/crypto/ocf/ChangeLog deleted file mode 100644 index e913ef2890..0000000000 --- a/target/linux/generic-2.6/files/crypto/ocf/ChangeLog +++ /dev/null @@ -1,1960 +0,0 @@ -2008-09-18 01:27 davidm - - * Makefile, README, README.sglinux, - patches/linux-2.6.26-natt.patch, patches/linux-2.6.26-ocf.patch, - patches/openssl-0.9.8g.patch, patches/openssl-0.9.8i.patch: - - Updates for a new OCF release with openssl-0.9.8i and linux-2.6.26 - support. - -2008-09-18 00:19 davidm - - * Config.in, Kconfig, Makefile, ep80579/Makefile, - ep80579/environment.mk, ep80579/icp_asym.c, ep80579/icp_common.c, - ep80579/icp_ocf.h, ep80579/icp_sym.c, - ep80579/linux_2.6_kernel_space.mk: - - A new driver from Intel for their Intel QuickAssist enabled EP80579 - Integrated Processor Product Line. - - Adrian Hoban Brad Vrabete - - -2008-07-25 01:01 gerg - - * ocf-compat.h: - - From linux-2.6.26 onwards there is now a linux/fdtable.h include - that contains the file_fdtable() definition. - -2008-07-05 01:20 davidm - - * Makefile, patches/linux-2.6.25-natt.patch, - patches/linux-2.6.25-ocf.patch: - - A new ocf-linux release and some patches to send to the OS guys. - -2008-07-03 21:21 davidm - - * crypto.c: - - Clean up a some possible deadlock/busy wait issues with - locking/sleeping. This has greatly improved openswan 2.6.14 - reliability ;-) - - Make more of our state available in /sys for debugging. - -2008-06-23 20:38 davidm - - * Config.in, Kconfig: - - Some settings should be bool's John Gumb - -2008-05-28 03:43 philipc - - * ixp4xx/ixp4xx.c: Revert previous checkin since the - callbacks are meant to complete the crypto request. Before - reverting this, CONFIG_DEBUG_SLAB gives: slab error in - verify_redzone_free(): cache `ixp4xx_q': double free detected when - trying to ssh to the device. - -2008-04-27 19:31 davidm - - * ixp4xx/ixp4xx.c: - - We were not completing a crypto request under some error - conditions. - -2008-04-02 01:51 davidm - - * talitos/talitos.c: - - This patch is for crypto/ocf/talitos for use on linux 2.6.23. It - is applied to the ocf-linux-20071215 release. - - Signed-off-by: Lee Nipper - -2008-02-29 00:43 davidm - - * crypto.c, ocf-compat.h, ixp4xx/ixp4xx.c: - - freshen up the 2.4 support, some recent OCF changes and openswan - changes are not that old-os friendly. - - Force OCF to select HW/SW, otherwise it may get stuck on the first - device. This change means we will favour HW over SW, but we will - use both as required. Passing in a crid of 0 to crypto_newsession - effectively meant we were stuck on the first device registered with - OCF, not good. This only applied to ipsec, cryptodev already did - the right thing. - -2008-01-31 07:37 gerg - - * hifn/hifn7751.c: - - The linux-2.6.24 modules build fails if the pci ID table doesn't - have a NULL entry at the end. So add one. - -2008-01-29 09:16 gerg - - * cryptosoft.c, ocf-compat.h: - - Added some compatability macros for scatterlist changes from 2.6.24 - onwards. - -2007-12-16 07:31 davidm - - * Makefile: - - missed an openssl patch name change - -2007-12-16 07:27 davidm - - * Makefile, README, README.sglinux, patches/linux-2.6.23-ocf.patch, - patches/openssl-0.9.8e.patch, patches/openssl-0.9.8g.patch, - patches/ssl.patch: - - updates for a new ocf release and associated bits - -2007-12-16 06:36 davidm - - * crypto.c: - - Be very careful what you do while potentially in an driver unload - state or we will call through NULL pointers. - - Reported by Nawang Chhetan . - -2007-12-14 22:32 davidm - - * cryptodev.c: - - Add in an unlock_ioctl when available to help SMP systems a lot. - Otherwise all ioctls get a BKL :-( - - Problem found by Egor N. Martovetsky - -2007-12-14 18:29 davidm - - * cryptosoft.c: - - reformat the alg table to make it easier to read. - -2007-12-14 18:29 davidm - - * crypto.c: - - Fix more driver locking/sleeping bugs report by Nawang Chhetan - - -2007-12-12 21:36 davidm - - * Config.in, Kconfig, Makefile, pasemi/Makefile, pasemi/pasemi.c, - pasemi/pasemi_fnu.h: - - Here I'm including my PA Semi driver patch to OCF. Please consider - it for inclusion into next OCF release. - - Egor N. Martovetsky - -2007-12-05 00:37 davidm - - * patches/: linux-2.4.35-ocf.patch, linux-2.6.22-ocf.patch: - - More correct count setting if we get a signal - - Adrian Hoban - -2007-12-05 00:02 davidm - - * random.c: - - OCF has a static array for holding random data. The random number - generator I have can write directly into physically contiguous - memory. Static memory comes from the heap and isn't physically - contiguous. I could use kmalloc'd memory and then copy into the OCF - static buf but I'd like to avoid a memory copy. The following patch - (Physically_Contig_Rand.patch) allows me to avoid a memory copy and - should not impact the other OCF drivers: - - Adrian Hoban - -2007-12-05 00:01 davidm - - * Kconfig: - - Fix a typo in the Kconfig - -2007-11-23 19:15 davidm - - * talitos/talitos_dev.h: - - fix the DPRINTF macro so that it actually compiles. - -2007-11-22 19:41 davidm - - * ocf-compat.h, talitos/talitos.c, talitos/talitos_dev.h: - - Various updates to get talitos compiling and work on real-world (ie - ubuntu) kernels. - -2007-11-08 02:21 davidm - - * crypto.c: - - keep and eye on us being completely blocked. If we have Q's to - process, but all the requests are blocked, sleep. We do not want - to busy loop until a driver unblocks as it uses valuable CPU - resources that could be doing something much more important ;-) - -2007-11-07 19:04 davidm - - * hifn/hifn7751.c: - - hifn driver was failing to unblock itself under some "out of - resources" conditions. It would return ERESTART to signal it was - full but never call crypto_unblock to start things moving again. - -2007-11-06 02:09 davidm - - * hifn/hifn7751.c: - - Remove some bogus trace left in the driver for the overflow (too - busy) case. - -2007-10-12 21:10 gerg - - * crypto.c, ixp4xx/ixp4xx.c: - - Fix up use of kmem_cache_create() - it takes one less argument in - 2.6.23 onwards. - -2007-10-03 02:41 gerg - - * ixp4xx/Makefile: - - The directory locations for includes in CSR-2.4 is different. Need - to modify the CFLAGS accordingly if using CSR-2.4. - -2007-09-22 00:39 philipc - - * ixp4xx/Makefile: linux 2.4 make dep was failing. This is - a quick fix to get it building, need to double check this. - -2007-09-19 00:13 mmccreat - - * Config.in: Add config option CONFIG_OCF_IXP4XX_SHA1_MD5, - that enables SHA1 and MD5 hashing to be done by the IXP4xx crypto - accelerator (although it is much slower than using cryptosoft). - -2007-09-18 21:45 mmccreat - - * Makefile, random.c: - Force the inclusion of autoconf.h, - which contains #defines for CONFIG_xxx options for OCF. - - Removing additional -D option, now that we are including the - CONFIG_xxx #defines. - -2007-09-18 21:44 mmccreat - - * Kconfig: Add config option CONFIG_OCF_IXP4XX_SHA1_MD5, - that enables SHA1 and MD5 hashing to be done by the IXP4xx crypto - accelerator (although it is much slower than using cryptosoft). - -2007-09-18 21:37 mmccreat - - * cryptodev.h: The CRYPTO_MAX_DATA_LEN limit should be - 0xFFFF ie 64K - 1. - -2007-09-18 21:19 mmccreat - - * ixp4xx/ixp4xx.c: - Rework the code so that the correct IXP - function, ixCryptoAccHashPerform(), is used to calculate SHA1 and - MD5 hashes. NB: The performance of using the IXP4xx hardware is - really, really poor compared to using cryptosoft (and the kernel - crypto). - Only support SHA1 and MD5 hashing if the - CONFIG_OCF_IXP4XX_SHA1_MD5 is enabled. - -2007-08-30 21:42 davidm - - * Makefile: - - do not archive build files in the crypto-tools archive - -2007-08-22 19:19 mmccreat - - * cryptodev.c: Fix up the checking for key lengths, when the - key can be of unlimited size. - -2007-08-16 01:50 davidm - - * Makefile: - - Better 2.4 compat for "make dep" now working with fastdep. - -2007-07-28 08:25 davidm - - * Makefile, README, README.sglinux, patches/crypto-tools.patch, - patches/linux-2.4.29-ocf.patch, patches/linux-2.4.35-ocf.patch, - patches/linux-2.6.11-ocf.patch, patches/linux-2.6.22-ocf.patch, - patches/ssl.patch: - - Update all the patches and put the patch making target back into - the Makefile. - -2007-07-28 08:25 davidm - - * hifn/hifn7751.c: - - fix an unused variable warning when HARVESTING is disabled - -2007-07-27 21:33 davidm - - * hifn/hifn7751.c, ixp4xx/ixp4xx.c, safe/safe.c, talitos/talitos.c: - - - Remove all the random code if OCF does not have radom harvesting - enabled. - -2007-07-26 00:36 davidm - - * Kconfig, hifn/hifnHIPP.c, hifn/hifnHIPPvar.h: - - Changes to get the hifn HIPP stub driver to build. - -2007-07-25 21:25 davidm - - * Makefile, hifn/Makefile, hifn/hifnHIPP.c, hifn/hifnHIPPreg.h, - hifn/hifnHIPPvar.h, ixp4xx/Makefile, ocfnull/Makefile, - safe/Makefile, talitos/Makefile: - - Bring in the hifnHIPP driver written by Xelerance. This is the - super hifn chip with full protocol offload. - - Switch to much more traditional Makefile/subdir building. The - Makefiles are nicer now, but still not beautiful, 2.6 and 2.4 - capable builds result in a certain amount of uglyiness. - -2007-07-24 21:46 davidm - - * cryptodev.c: - - Clean up all the driver id checking and session management so - adding/removing drivers all continues to run cleanly. - -2007-07-24 20:14 davidm - - * talitos/talitos.c: - - From: Ahsan Kabir - - less than .1% packet corruption was detected using the talitos - driver. It turns out we don't need the cipher iv out len/ptr field - to do ESP IPsec. Therefore we set the len field as 0, which tells - the SEC not to do anything with this len/ptr field. - - Signed-off-by: Ahsan Kabir - Signed-off-by: Kim Phillips - -2007-07-24 08:25 davidm - - * cryptosoft.c, ocf-bench.c, hifn/hifn7751.c, ixp4xx/ixp4xx.c, - safe/safe.c, talitos/talitos.c: - - Switch the remaining GFP_ATOMIC to the newer and not deprecated - SLAB_ATOMIC - -2007-07-23 22:16 mmccreat - - * ixp4xx/ixp4xx.c: Add missing ";" from end of dprintk() - call! - -2007-07-21 01:16 davidm - - * ocf-compat.h, rndtest.c, hifn/hifn7751.c, safe/safe.c: - - pci_register_driver is nothing like it is depending on the kernel, - so we need a compat function to fix it up for all kernels before - 2.6.10, and in different ways for older and not so older versions. - -2007-07-20 21:54 davidm - - * safe/safe.c: - - Make the debug macro ';' safe so you do not get compiler warnings - -2007-07-20 21:53 davidm - - * talitos/: talitos.c, talitos_dev.h, talitos_soft.h: - - update to the latest FreeBSD driver structure and fix up the code - as required. - -2007-07-20 03:07 davidm - - * rndtest.c: - - more headers needed to compile on 2.4 - -2007-07-20 03:00 davidm - - * cryptosoft.c: - - Put in the 2.4 stubs to support compression - -2007-07-20 02:53 davidm - - * crypto.c, ocf-compat.h: - - move some more compat stuff into the compat header. - -2007-07-20 02:47 davidm - - * talitos/talitos.c: - - support of_platform_driver for newer, ARCH=powerpc based kernels. - Signed-off-by: Kim Phillips - -2007-07-20 02:46 davidm - - * talitos/talitos.c: - - From: Ahsan Kabir - - When Talitos completes job both the channel and execution unit are - capable of generating interrupts. Talitos used to take two - interrupts per request - one for channel completion and the other - for execution unit completion. This patch ensures that Talitos - takes interrupt only for channel completion. Execution unit will - generate interrupt only when there is error and the error - interrupts for execution units are not masked. - - Signed-off-by: Ahsan Kabir - Signed-off-by: Kim Phillips - -2007-07-20 02:37 davidm - - * cryptodev.c: - - Unless the user specifies, select from both HW and SW. - - Clean up some debug to report the actual ioctl name. - - Compiler warning on newer compilers. - -2007-07-20 02:35 davidm - - * cryptodev.h: - - moved dprintk to the compat code, seemed nicer in there. - -2007-07-20 02:35 davidm - - * rndtest.c: - - Need to clean up some warnings etc, more includes - -2007-07-20 02:34 davidm - - * ocf-compat.h, hifn/hifn7751.c, safe/safe.c: - - new shared IRQ flags for 2.6.22 and a safer version of the debug - macro - -2007-07-20 00:52 davidm - - * cryptosoft.c: - - Implement compression based on the code from the openswan guys. - -2007-07-20 00:52 davidm - - * criov.c: - - Fix compiler warning on non-value returning void func. - -2007-07-18 22:55 davidm - - * hifn/hifn7751.c, safe/safe.c: - - Use pci_register_driver rather than pci_module_init. - pci_module_init has been dropped in 2.6.22 yet pci_register_driver - has always existed and used to do some crazy hotplug junk. - -2007-07-18 21:55 gerg - - * ixp4xx/ixp4xx.c: - - Added a missing ";" at the end of the ixp_kproces() prototype. It - is IXP465 specific, only showed up when generateing for SG720. - -2007-07-17 00:37 davidm - - * Makefile, cryptodev.c, random.c, rndtest.c, hifn/hifn7751.c, - ocfnull/ocfnull.c, safe/safe.c: - - Fixup all the debug support for 2.4 kernels, clean up the entropy - harvester to be far more robust. - -2007-07-14 02:19 davidm - - * talitos/talitos.c: - - Old patch that had not been applied Kim Phillips - - -2007-07-14 01:12 davidm - - * Config.in, Kconfig, Makefile, cryptodev.c, cryptodev.h, random.c, - syscall.h: - - Finally ditched all the syscall stuff. You can now enable/disable - the random harvestor. Pulled in most of random.c from openswan - project and fixed some obvious bugs (that were always there). - -2007-07-13 21:59 davidm - - * ocf-compat.h: - - Better error printing and checking for drivers - -2007-07-13 21:56 davidm - - * cryptosoft.c: - - Fix some incorrect debug (reporting wrong error type) - -2007-07-13 21:55 davidm - - * hifn/hifn7751.c, safe/safe.c: - - Make the code more similar to Free-BSD by reverting to the same - debug macros - -2007-07-13 21:53 davidm - - * ocfnull/ocfnull.c: - - Fix up the null driver to work again in the new framework. - -2007-07-06 23:54 mmccreat - - * cryptodev.c, cryptodev.h, cryptosoft.c: - Update OCF to - work with new Crypto API introduced in 2.6.19 kerneli, and add - macros so it work with older kernels. - Add support for SHA256, - SHA384 and SHA512 HASH and HMAC algorithms. - Cryptosoft: Only - register algorithms that the kernel has implementations for. - -2007-07-03 19:52 davidm - - * Kconfig, README, README.sglinux, criov.c, crypto.c, cryptodev.c, - cryptodev.h, cryptosoft.c, ocf-bench.c, ocf-compat.h, random.c, - rndtest.c, uio.h, hifn/hifn7751.c, hifn/hifn7751reg.h, - hifn/hifn7751var.h, ixp4xx/ixp4xx.c, ocfnull/ocfnull.c, - safe/safe.c, safe/safevar.h, talitos/talitos.c: - - Updated OCF to the lastest FreeBSD version. - - There was a lot of change in here, some of which will help FIP's, - some which won't. - - Did lots of cleaning and diff reduction against the freebsd code. - Still more cleaning to do. - -2007-06-01 21:58 gerg - - * Config.in: - - Put the regular old Config.in back, needed for puclic releases. - -2007-06-01 21:58 gerg - - * Kconfig: - - Change the CONFIG_OCF_IXP400 dependencies to be the same as they - where in the Config.in file. - -2007-05-28 21:40 gerg - - * Config.in, Kconfig: - - Switch all module configuration over to new style Kconfigs. - -2007-05-24 18:49 davidm - - * cryptodev.c, random.c: - - Work around some problems on redhat systems with errno redefinition - -2007-04-30 21:09 gerg - - * cryptosoft.c: - - The CRYPTO_TFM_MODE_ family of defines no longer exists from 2.6.21 - onwards. As far as I can tell you don't need to pass it to the - crypto_alloc_tfm() function anymore. - - So define it to be 0 if it doesn't exist. - -2007-04-03 02:13 gerg - - * syscall.h: - - Added syscall macros for SH architecture. Just temporary, 'till - Dave fixes the OCF code to not use syscalls from the modules :-) - -2007-02-16 23:10 davidm - - * syscall.h: - - ensure the temprary 2.6 fix doesn't break 2.4 - -2007-02-07 22:23 gerg - - * cryptodev.c, random.c, syscall.h: - - Temporary fix for new 2.6 kernels no longer defining in-kernel - system call functions. Define them locally for now until we fix - properly. - -2007-02-07 03:10 gerg - - * ixp4xx/ixp4xx.c: - - Changes to support the different INIT_WORK() mechanism from kernels - 2.6.20 onwards. - -2007-02-06 02:38 gerg - - * crypto.c: - - Cleaned up use of kmem_cache_t and use of SLAB_ATOMIC. - -2006-12-05 20:50 cpascoe - - * hifn/hifn7751.c, safe/safe.c, talitos/talitos.c: - - Remove pt_regs from OCF interrupt handlers for 2.6.19+ - -2006-12-02 03:36 gerg - - * criov.c, crypto.c, cryptodev.c, cryptosoft.c, ocf-bench.c, - random.c, rndtest.c, hifn/hifn7751.c, ixp4xx/ixp4xx.c, - ocfnull/ocfnull.c, safe/safe.c, talitos/talitos.c: - - Can no longer include linux/config.h as of 2.6.19 kernels. Need to - conditionally include it based on AUTOCONF_INCLUDED not being - defined. - -2006-10-13 21:52 cpascoe - - * random.c: - - Remove another race condition that may result in us running more - than one random thread if modules are reloaded during heavy system - load. - -2006-10-13 21:18 cpascoe - - * random.c: - - - Permit delivery of SIGKILL to the random thread. - Do not exit - prematurely if poll() is interrupted. - Improve exit conditions so - that we quit immediately, rather than loop infinitely, if the - last RNG source is removed while we are trying to fill our - buffer. - -2006-10-03 20:28 cpascoe - - * crypto.c, crypto.c: AutoMerged - > - > Zero the empty half of "new driver" buffer, and not past the end - of the old - > buffer that we are about to free. - -2006-10-03 20:28 cpascoe - - * crypto.c: - - Zero the empty half of "new driver" buffer, and not past the end of - the old buffer that we are about to free. - -2006-08-25 23:57 davidm - - * cryptosoft.c: - - Do not print errors for failed ALG requests unless debugging - -2006-07-14 21:44 davidm - - * cryptodev.h: - - 2.6.11 and earlier did not have the files_fdtable macro. - -2006-06-21 21:26 gerg - - * cryptodev.h, hifn/hifn7751.c, ocfnull/ocfnull.c, safe/safe.c, - talitos/talitos.c: - - Fixed up more occurrances of MODULE_PARM() needing to be converted - to module_param() (as of 2.6.17 and onwards). - -2006-06-21 00:28 gerg - - * cryptosoft.c: - - Change use of MODULE_PARM to module_param() for 2.6.17+ kernels. - -2006-06-20 22:13 gerg - - * crypto.c, cryptodev.c, cryptodev.h, ocf-bench.c, ixp4xx/ixp4xx.c: - - - As of 2.6.17 and onwards module_param is used in place of - MODULE_PARM. - -2006-06-06 00:31 gerg - - * Makefile: - - Fix Makefile to find includes is using CSR-2.1. - -2006-05-31 01:44 gerg - - * cryptodev.h: - - The vars "crypto_usercrypto", "crypto_userasymcrypto" are declared - as extern in the header file, but static in the c file. I guessed - that they should probably be truely static, so removed the extern - declarations from the header. - -2006-05-25 21:06 davidm - - * talitos/talitos.c: - - This fixes a situation that I never provably experienced, where a - descriptor in memory may be reserved within the proper lock, and - freed immediately after, only for a few cycles, right outside the - lock. Kim Phillips - -2006-05-15 19:49 davidm - - * criov.c, crypto.c, cryptodev.c, cryptodev.h, cryptosoft.c, - ocf-bench.c, random.c, rndtest.c, uio.h, ixp4xx/ixp4xx.c: - - Remove the "all rights reserved" from the Intel copyrights. - -2006-05-12 21:19 davidm - - * Config.in, Kconfig, Makefile, cryptodev.c, ocf-bench.c, - ocfnull/ocfnull.c: - - Add in a null OCF driver that does nothing at all, useful for - measuring the cost of various parts of the ipsec stack. - -2006-05-12 21:17 davidm - - * ixp4xx/ixp4xx.c: - - make sure we do not overwrite a correctly set error type. - -2006-05-12 06:52 davidm - - * crypto.c: - - Fix a problem where a driver would return ERESTART (full) but then - unblock itself before the upper layer had marked it as blocked. - This caused the code to get stuck in crypto_proc and process no - more requests. - -2006-05-12 06:47 davidm - - * cryptosoft.c: - - Implement CRD_F_KEY_EXPLICIT for cryptosoft so keys can be changed - on an active session. - -2006-05-10 20:09 davidm - - * README, criov.c, crypto.c, cryptodev.h, cryptosoft.c, - ocf-bench.c, random.c, rndtest.c, uio.h, hifn/hifn7751.c, - ixp4xx/ixp4xx.c, safe/safe.c, safe/safevar.h: - - update email addresses and other house cleaning - -2006-05-10 20:08 davidm - - * cryptodev.c: - - pull in better error checking from openswan modifications - -2006-05-10 19:11 davidm - - * cryptosoft.c: - - Fix an unused variable warning when various options are disabled. - -2006-05-10 19:10 davidm - - * cryptodev.h: - - Add support for 2.4 kernels for the new FD cloning operation - -2006-05-09 19:48 davidm - - * hifn/hifn7751.c: - - remove the hifn 7855 support, this driver will never work with - that chip. - -2006-05-08 23:34 davidm - - * hifn/hifn7751var.h: - - Contiguous buffer support so that ocf-bench can run properly. - -2006-05-05 23:21 davidm - - * hifn/hifn7751.c: - - Add in contiguous buffer support so that ocf-bench and run on the - driver. - -2006-05-05 23:14 davidm - - * ocf-bench.c: - - Our requests were out of order, need to do crypto then auth on - encrypt requests. Some drivers enforce this. - -2006-05-04 23:21 davidm - - * crypto.c: - - Do not run "newsession" with lock, since newsession may sleep on - some targets. Handle the accounting so that things are not pulled - from underneath us. - -2006-05-04 23:20 davidm - - * cryptodev.c: - - Switch to a less optimal (marginally) solution for creating a new - fd that appears to work in far more versions of the kernel - including 64bit versions. - -2006-05-04 18:54 davidm - - * ocf-bench.c: - - Turn off the IXP access lib benchmarking by default as most people - don't have it. - - Paul Wouters - -2006-04-01 08:23 davidm - - * Makefile: - - Remove more temp files when cleaning - -2006-04-01 08:12 davidm - - * hifn/hifn7751reg.h: - - 7855 PCI id's as yet untested - -2006-04-01 08:08 davidm - - * hifn/hifn7751.c: - - add PCI id's for the 7855 and AES support, card is untested still - as it requires 128MB of PCI memory ! - -2006-03-31 08:38 davidm - - * README.sglinux: - - small update to instructions with corrected patch name - -2006-03-31 00:23 davidm - - * Config.in: - - Add the Talitos driver to the 2.4 config, even though it probably - won't compile. - -2006-03-30 07:48 davidm - - * Kconfig, Makefile, talitos/talitos.c, talitos/talitos_dev.h, - talitos/talitos_soft.h: - - Please find attached the freescale SEC driver for OCF. It's been - (most recently) tested on an SEC2.0 based MPC8541E - (cryptographically identical to the MPC8555E) under 2.6.15.2, with - openssl-0.9.8a and openswan-2.4.3 (2.4.5rc5 won't keep the security - association up for me for some reason). - - Please feel free to add it to your next release of OCF-Linux :-) - - Kim Phillips - -2006-03-20 19:34 davidm - - * safe/: safe.c, safevar.h: - - Safenet 1141 v1.0 chips have a DMA lockup error if you access the - chip while DMA'ing. As a work around you need to limit your DMA to - 256 byte chunks using scatter/gather descriptors. All the SG/SME - products have v1.0 chips and would lockup with more than two - outstanding packets at one time. - - Fix the KASSERT macro - - Add some more exhaustive initialisation. - -2006-03-15 21:58 davidm - - * cryptodev.h, random.c: - - Switch random support to "ints" since that is what the kernel uses - and not using the same thing is 64bit wise a bad idea. - - Fix FIP's code to ensure correct amount of data is passed in. - - Add work around for broken 64bit OS RNG support (disable it) - - General code cleanups. - -2006-03-15 21:55 davidm - - * hifn/hifn7751.c: - - Fixes for 64bit OS's, make sure PCI address are within bus space, - make sure we order writes to the bus so that chip functions - correctly. Some small cleanups. - -2006-03-15 21:48 davidm - - * hifn/hifn7751var.h: - - Remove unused field from structure - -2006-03-15 21:47 davidm - - * safe/safe.c: - - Make the code more 64bit OS compatible, force PCI address space - and so on. - -2006-03-09 20:42 davidm - - * ixp4xx/ixp4xx.c: - - If we call ixpCryptoAccInit() and it fails, just assume that it - has already been called. This allows our "rc" scripts to be - openswan and freeswan compatible ore easily. - -2006-02-28 23:21 davidm - - * README: - - generalise it a bit so rel-dates don't get in the way - -2006-02-28 01:52 davidm - - * README, patches/ssh.patch, patches/ssl.patch: - - Updated the README and patches for a release - -2006-02-25 09:21 davidm - - * README, README.sglinux: - - updates for a new release of OCF, ssl patches and so on. - -2006-02-25 08:44 davidm - - * crypto.c: - - We were calling the "process"routines with interrupts disabled. I - can see no good reason for this and it provokes badness warnings in - 2.6 under some conditions. - - I am going to run with the Q's unlocked for processing, and - hopefully it will allow the system to be more responsive. It - hasn't affected ipsec throughput in any way. Userland throughput - (multi threaded) may have improved significantly though, but it - needs more testing. - -2006-02-24 23:32 davidm - - * cryptodev.c: - - Whoa, set the segments with uninitted values can't be good. Clean - out the rest of the old code that was accidently left in. - -2006-02-22 01:02 davidm - - * cryptodev.c: - - Still not sure about this one, but this is working for all the - cases I can see so far. If it gets weird, I am going to switch to - a simple clone and chain the sessions rather than a new fcr per fd. - -2006-02-20 22:12 davidm - - * cryptodev.c: - - Error handling case could free data that was not allocated - - Ronen Shitrit Marvell Semiconductor Israel - Ltd - -2006-02-20 21:57 davidm - - * cryptosoft.c: - - Proper SHA/MD5 (non hmac) implementation, remove some retrictions - for hashes (which only applied to crypto) and fix over zealous - error checking. - - Ronen Shitrit Marvell Semiconductor Israel - Ltd - -2006-02-09 21:15 davidm - - * cryptodev.c: - - The code wasn't quite right and needed some fixing for proper file - accounting. - -2006-01-24 20:08 davidm - - * crypto.c, cryptodev.c, hifn/hifn7751.c: - - We implement our own open in the CRIOGET ioctl now which does - pretty much the same thing as the BSD version, rather than use an - open system call which gets caught out by chroot. - -2006-01-06 00:42 gerg - - * cryptosoft.c: - - Moved "{" block marker inside the set of - "defined(CONFIG_CRYPTO_HMAC) || defined(CONFIG_CRYPTO_HMAC_MODULE)" - code (in function swcr_process) so that it compiled if these where - not defined. - -2005-11-11 01:44 davidm - - * Makefile, README: - - cleanups for a general release of OCF - -2005-11-11 01:18 davidm - - * patches/ssl.patch: - - Updated the ssl patch to the latest and greatest changed we have - made. - -2005-11-10 21:41 davidm - - * Makefile, ixp4xx/ixp4xx.c: - - Better debug for bad input. - - Have make clean do more cleaning and less talking. - -2005-11-03 20:53 davidm - - * cryptosoft.c: - - clean up some compilation errors with various options on/off - -2005-10-25 00:25 davidm - - * Makefile: - - Add a patch target that generates full kernel patches to add OCF - into either a 2.4 or 2.6 kernel as a single patch. - -2005-10-25 00:24 davidm - - * Kconfig: - - Make sure all OCF settings depend on OCF_OCF - -2005-09-23 02:45 davidm - - * README, README.sglinux: - - new crypto-tools archive to keep the tools up to date - -2005-09-23 02:08 davidm - - * Makefile, README, README.sglinux: - - updates for doing OCF releases - -2005-09-23 01:59 davidm - - * patches/: ssh.patch, ssl.patch: - - updated the patches for the latest in fixes etc to ssh/ssl for a - new OCF release before the openswan 2.4.1 merge. - -2005-09-21 00:57 davidm - - * Makefile, cryptosoft.c, hifn/hifn7751.c, ixp4xx/ixp4xx.c: - - Fixes for building cleanly under 2.6 - -2005-09-13 23:11 davidm - - * ocf-bench.c: - - Add an exit function for cleaner 2.6 support. Patch from Ronen - Shitrit - -2005-07-30 00:23 davidm - - * cryptosoft.c: - - Add proper hooks for MD5/SHA and their HMAC countrparts processing - from cryptodev. - -2005-07-29 01:50 davidm - - * cryptodev.c: - - cryptodev did not support MD5 and SHA1, only the HMAC versions - -2005-07-29 01:05 davidm - - * ixp4xx/ixp4xx.c: - - register for MD5, return 16 bytes for MD5 and 12 for MD5_HMAC, - likewise for SHA1 (only 20 is not HMAC). - -2005-07-28 21:52 davidm - - * ixp4xx/ixp4xx.c: - - First pass fix of userland MD5 processing. We now do as well as - the safenet does, I think. - -2005-07-27 06:23 davidm - - * cryptodev.c: - - udelay doesn't give up the current thread, thus the kernel will get - locked if a process is killed but the hardware never completes the - crypto request. - -2005-07-22 02:07 davidm - - * crypto.c, cryptodev.h: - - Implement queuing limits for input/output and OCF requests. - - Implement 2.6 style work queues instead of the 2.4 task_queues. - -2005-07-21 20:42 davidm - - * cryptodev.h, ocf-bench.c, ixp4xx/ixp4xx.c: - - Fix OCF to use work queues, add 2.4 version of work queues to - cryptodev.h for use in ipsec and elsewhere. - - Problem and initial patch provided by David Vrabel - . Cleaned up and 2.4 support added by me. - -2005-07-21 19:08 davidm - - * random.c: - - Fix spinlock initialisation, problem reported by Andy @ - windsorcarclub.co.uk. - -2005-07-20 20:24 davidm - - * cryptodev.c: - - fix a silly spelling mistake - -2005-07-08 00:56 gerg - - * Makefile: - - Only build ocf-bench when CONFIG_OCF_BENCH is acrually enabled. - -2005-06-27 20:29 davidm - - * ixp4xx/ixp4xx.c: - - Ok, we need a simple implentation here or we go too slow for UDP - tests. For now, if the Q is full just ditch the packet, someone - has to do it. - -2005-06-25 01:13 davidm - - * safe/safe.c: - - bytes swapping etc all seems wrong for safenet on BE, these fixes - see both MD5 and SHA1 working with OpenSwan. - -2005-06-22 23:10 davidm - - * random.c: - - clean up some ifdef code a little - -2005-06-22 21:28 davidm - - * ixp4xx/ixp4xx.c: - - Make sure we do not call blocking functions from ISR callable - routines. In this case we were calling ixCryptoAccCtxUnregister. - - Run all the random numbers through SHA1 process to ensure more - uniform distribution of bits (NOTE: it is not more random in any - way) - -2005-06-21 00:11 davidm - - * ixp4xx/ixp4xx.c: - - do not process requests from the register callback, gets the AES - code all messed up. - - Align caches on HW cache boundaries ot improve speed. - - More tracking or potential errors. - -2005-06-15 01:55 davidm - - * ixp4xx/ixp4xx.c: - - technically ixCryptoAccCtxRegister cannot be called from IRQ - context, so run it from the immediate BH. - -2005-06-14 23:13 davidm - - * ocf-bench.c: - - Fix some compile warnings/errors - -2005-06-14 20:52 davidm - - * Config.in, Kconfig, Makefile, ocf-bench.c: - - Add in kernel benchmark driver - - Support for building under CSR 1.4 and 2.0 is now complete - -2005-06-14 20:51 davidm - - * crypto.c: - - Do not use immediate processing for SW drivers otherwise we hold a - lock for too long. Instead force BATCH processing. - - Problem found by David Vrabel - -2005-06-14 20:46 davidm - - * cryptodev.c: - - Fix up AES minimum key size - - Make some more variables static - -2005-06-14 20:36 davidm - - * ixp4xx/ixp4xx.c: - - Use kernel caches as they are more efficient and faster to obtain. - - Fix some spelling - - Tune PKE to only use the space required. Turn off go fast options - to reduce any speed-related cracking. - - Only zero data that needs to be zeroed (save some cycles) - -2005-06-02 21:42 davidm - - * ixp4xx/ixp4xx.c: - - Added optimisations ideas from Intel the improve the PKE - performance for 512 and 1024 bits operations. - -2005-06-01 02:13 davidm - - * ixp4xx/ixp4xx.c: - - Looks like I found the ixp bug. Using OSAL buffer routines on - non-OSAL buffers is a very very bad thing to do. Must double check - all the API's I am using (ie., PKE) just to be sure. - -2005-05-31 21:38 davidm - - * Config.in, Kconfig: - - Updated/Added the menu wrapper for the config options - -2005-05-31 21:18 gerg - - * Config.in: - - Reworked the config.in so that each sub-module has its own - Config.in. That way it is easier to make release trees with some - modules left in. - -2005-05-30 19:46 davidm - - * ixp4xx/ixp4xx.c: - - Not all the Pke code was appropriately ifdef'd - -2005-05-28 01:49 davidm - - * cryptosoft.c: - - We were not injecting data in the right places nor calling the - cipher code the best was under all situations. We are now good - enought to do ESP/AH processing with 3DES and SHA1-HMAC. - -2005-05-28 01:42 davidm - - * hifn/hifn7751.c: - - Non atomic kmallocs at IRQ time are bad and cause lockups - -2005-05-21 08:31 davidm - - * README, README.sglinux: - - Some small updates to email and patches that no longer exist - -2005-05-21 08:25 davidm - - * cryptosoft.c: - - better error message on failure, a lot of the error check we do - sems to break apps like cryptotest, not sure who is right yet. - -2005-05-21 00:55 davidm - - * criov.c, crypto.c, cryptodev.c, cryptodev.h, cryptosoft.c, - random.c, rndtest.c, uio.h, hifn/hifn7751.c, ixp4xx/ixp4xx.c, - safe/safe.c, safe/safevar.h: - - Convert to CyberGuard email addresses for OCF files. - -2005-05-21 00:28 davidm - - * crypto.c, cryptodev.c, cryptosoft.c, hifn/hifn7751.c, - ixp4xx/ixp4xx.c, safe/safe.c: - - final round of naming changes, hifn driver also confirmed working - in SG710 - -2005-05-20 23:50 davidm - - * cryptosoft.c, random.c, uio.h, ixp4xx/ixp4xx.c: - - more copyright/author updates etc for Intel - -2005-05-20 23:48 davidm - - * criov.c, crypto.c, cryptodev.c, cryptodev.h, cryptosoft.c, - random.c, rndtest.c, uio.h, ixp4xx/ixp4xx.c, safe/safe.c, - safe/safevar.h: - - updated copyrights to reflect Intels interest/investment in the - project - -2005-05-20 20:31 davidm - - * hifn/: hifn7751.c, hifn7751var.h: - - Most of a working SKB implementation now - -2005-05-20 20:30 davidm - - * safe/: md5.c, md5.h, safe.c, sha1.c, sha1.h: - - Full AH/ESP processing now working, just added BSD sha/md5 - routines as needed for now. - -2005-05-20 20:30 davidm - - * random.c: - - use the new BSD rndtest code rather than the old GPL fips code - -2005-05-20 20:28 davidm - - * Makefile, fips.c, fips.h, rndtest.c, rndtest.h: - - Get rid of the GPL version of the fips test and use a BSD licensed - version so no one can get upset and cry derivative :-) - -2005-05-20 08:19 davidm - - * ixp4xx/ixp4xx.c: - - High throughput improvements. Can now handle multiple simultaneous - requests. - -2005-05-20 00:55 davidm - - * ixp4xx/ixp4xx.c: - - works with openswan/OCF for ipsec receive. - - fixes ESP/AUTH processing (esp. HMAC) - - This driver needs a rework for kernel IPSEC as it's current packet - at a time processing is not up to the task. - -2005-05-20 00:53 davidm - - * cryptosoft.c: - - working ESP/AUTH code now impleneted. Can do RX processing for - openswan KLIPS. - - Fixes numerous problems in skb processing - - Fixes broken HMAC code and IV processing - -2005-05-14 01:44 davidm - - * cryptodev.c, ixp4xx/ixp4xx.c: - - Cleanup IXP key processing to guarantee only a single outstanding - request rather than relying on the intel driver to get it right. - Stops us losing requests. - - Tighten up the cryptodev response to "no answer" so that we don't - take all the CPU. Only happens if there is a driver bug. - -2005-05-14 00:07 davidm - - * Config.in, Kconfig, Makefile, crypto.c, fips.c, fips.h, random.c, - ixp4xx/ixp4xx.c, tools/bench-ocf: - - PKE and RNG support running on the ixp driver, added PKE bench - marking to script. Still some multi-thread problems in the PKE - code. - - Added FIP RNG checking option to config and code. - -2005-05-10 19:18 davidm - - * Makefile, ixp4xx/ixp4xx.c: - - Get the OCF stuff building for the 465 and CSR-2.0 - -2005-04-27 19:18 davidm - - * cryptodev.h, random.c, hifn/hifn7751.c, safe/safe.c: - cleanup the random number interface some more - -2005-04-27 00:57 davidm - - * cryptodev.h, cryptosoft.c, random.c, hifn/hifn7751.c, - ixp4xx/ixp4xx.c, patches/linux-2.4.29-add_true_randomness.patch, - patches/linux-2.6.11-add_true_randomness.patch, safe/safe.c, - safe/safevar.h: - - Switch to a more "user" like random number handling. Drivers no - longer poll for RNG data, we pull it as needed to fill - /dev/random's entropy. - - Implement sk_buff handling within the OCF framework. - - fixup IV handling in cryptosoft. - -2005-04-27 00:41 davidm - - * crypto.c: - - Fix a race condition with the starting of kernel threads. The - threads were running before the pid assignment in the parent. - -2005-03-24 23:57 davidm - - * Makefile: - include crypto-tools.patch in the release file - - - -2005-03-24 20:14 davidm - - * safe/safe.c: - Fixup compile time warnings due to some left over BSDisms - - -2005-03-24 00:53 davidm - - * Makefile, README, README.sglinux, patches/linux-2.4.29-ocf.patch, - patches/linux-2.6.11-ocf.patch, patches/ocf-linux-2.4.29.patch, - patches/ocf-linux-2.6.11.patch: - added cleaner patch names and a tarball target to aid releases - - -2005-03-24 00:28 davidm - - * patches/crypto-tools.patch, - patches/linux-2.4.29-add_true_randomness.patch, - patches/linux-2.6.11-add_true_randomness.patch, - patches/ocf-linux-2.4.29.patch, patches/ocf-linux-2.6.11.patch, - patches/ssh.patch, patches/ssl.patch, tools/bench-ocf: - move all the release file patches into CVS for simplicity - - -2005-03-23 20:37 davidm - - * safe/safe.c: - remove excessive debug from RNG routines so that you can turn on - debug and live through it - - - -2005-03-23 02:23 davidm - - * safe/safe.c: - fix memory corruption for mod_exp and the safenet, we were copying - back more than the space available. - - - -2005-03-22 21:45 davidm - - * crypto.c, cryptodev.c, cryptodev.h, safe/safe.c: - fixup a major sync issues with key processing (callback called - before sleeping). Improve its performance while we are there with - a CBIMM (callback immediate) option. - - - -2005-03-19 00:33 davidm - - * random.c: - A new randomness function for both 2.4 and 2.6 that replaces out - previous old solution for the hifn driver with more generic code - that works on both kernels. - - add_true_randomness(u_int32_t *buf, int nwords); - - - -2005-03-18 21:01 davidm - - * Makefile, cryptodev.h, random.c, hifn/hifn7751.c, safe/safe.c: - RNG support in both the safenet and the hifn plus the required - kernel support. - - "hd /dev/random" runs much much faster now :-) - - - -2005-03-17 23:29 toby - - * cryptodev.c: Make sure the CIOCASYMFEAT ioctl on - /dev/crypto copies out the capable features. - -2005-03-17 01:19 davidm - - * safe/: safe.c, safereg.h, safevar.h: - hardware PK acceleration on the safenet (CRK_MOD_EXP only) - - -2005-03-16 04:28 davidm - - * criov.c, crypto.c, cryptodev.c, safe/safe.c: - fixup the FBSD id stuff to compile :-) - -2005-03-16 04:02 davidm - - * README, README.sglinux, TODO: - Updated with versions, removed tabs, new kernel versions, web - site etc - -2005-03-16 03:45 davidm - - * criov.c, crypto.c, cryptodev.c, cryptodev.h: - more license formatting and version id's to help keep in touch with - FreeBSD - -2005-03-16 03:16 davidm - - * safe/safe.c: - up to date with FreeBSD versioning, no changes to merge - -2005-03-16 03:15 davidm - - * safe/safe.c: - include FreeBSD version info so I can track changes better - - -2005-03-16 03:11 davidm - - * hifn/: hifn7751.c, hifn7751reg.h, hifn7751var.h: - incorporate latest updates from FreeBSD: - - | Update support for 795x parts: | o rework pll setup code to - follow h/w specification | o add hint.hifn.X.pllconfig to specify - reference clock setup | requirements; default is pci66 which - means the clock is | derived from the PCI bus clock and the card - resides in a | 66MHz slot | | Tested on 7955 and 7956 cards; - support for 7954 cards not enabled | since we have no cards to test - against. - - - -2005-03-16 02:50 davidm - - * Config.in, Kconfig, README, crypto.c, cryptodev.c, cryptodev.h, - hifn/hifn7751.c, hifn/hifn7751var.h, safe/safe.c, safe/safevar.h: - cleanups to build and run on 2.6.11 and 2.4.29 for a public release - - included configs locally to reduce patch to kernel and required - user effort. - - pci_dma_sync_single fix from Michele Baldessari - , with modifications by me to work on all - kernels. - - - -2005-03-11 23:30 davidm - - * Makefile: - fix up the compiling again, I had outstanding commits for this one - :-) - -2005-03-11 21:56 danield - - * Makefile: Get ocf modules building again. - -2004-12-25 07:12 davidm - - * TODO: - safenet is all good now AKAIK - -2004-12-25 07:02 davidm - - * Makefile, crypto.c, cryptodev.c, cryptosoft.c, uio.h: - 2.6 port of the OCF framework, tested on Xscale and compiled for - x86 - - - -2004-12-10 02:41 davidm - - * hifn/hifn7751.c: - Fix compilation as l_flags was not defined for LOCK in pci_remove - - -2004-12-06 19:15 davidm - - * hifn/hifn7751.c, safe/safe.c: - * Put locking into hifn_remove to ensure interrupts are not running - while we remove the driver - - Use del_timer_sync (need to ensure timer is not running on - another CPU - * when we delete it). - - Improvements suggested by Evgeniy Polyakov <johnpol@2ka.mipt.ru> - - -2004-12-02 09:16 davidm - - * README, README.sglinux: - * Fix up all tabs to be spaces * explain how to update the ocf - support in the patch to the current version. - - - -2004-12-02 09:11 davidm - - * README: - * fix some spelling/grammar * add more info on the ssl.patch file - and what it contains - -2004-12-02 09:08 davidm - - * README.sglinux: - give some more instructions on the shar archive and extracting the - release. - -2004-12-02 09:03 davidm - - * README.sglinux: - how to include crypto-tools into 3.1.6 - - - -2004-12-02 08:48 davidm - - * README.sglinux: - updated for a new crypto patch for openssl-0.9.7e - -2004-12-02 08:04 davidm - - * README, README.sglinux: - Clean up the README's to use the new SG Linux alpha and a specific - 2.4.28 patch. - - - -2004-12-01 23:11 davidm - - * Makefile, criov.c, crypto.c, cryptodev.c, cryptosoft.c, - hifn/Makefile, hifn/hifn7751.c, ixp4xx/Makefile, ixp4xx/ixp4xx.c, - safe/Makefile, safe/safe.c: - Re-worked the Makefiles so that including the code into a standard - non-SG kernel is really easy. - - Fixed a non-initialised bug that was introduce into cryptosoft.c - with the additional error checking. - - - -2004-12-01 01:54 davidm - - * TODO: - updates based on things that have been fixed. - -2004-12-01 01:53 davidm - - * safe/: safe.c, safevar.h: - Cleanup some old hacks based on the much cleaner port of the hifn - driver. - -2004-12-01 01:53 davidm - - * cryptosoft.c: - fix some crashes due to bad buffer sizes etc. - -2004-11-27 09:16 davidm - - * crypto.c, cryptodev.c, ixp4xx/ixp4xx.c: - Fixed some nasty problems that were stopping reliable behaviour: - - 1) we were not initialising some of our lists/wait queues, which - meant they appears to have things in them when in fact they did - not. This actually didn't seems to cause any problems but is - extremely bogus. - - 2) While a process was waiting for the crypto engine, if - itreceived a signal we would lose sync with the engine and end - up allowing out-of-band actions that were invalid (ie., - unregistering a context that was still active in a crypto - operation). - - Of source the CryptACC should probably deal with this as well - ;-) - - - -2004-11-26 01:33 davidm - - * TODO: - We should also hook in the random number generators to linux - - -2004-11-26 01:33 davidm - - * hifn/hifn7751.c: - Changed all the accesses to DMS descriptors to not set the valid - bit until after everything else was set. This got the driver - running smoothly, along with a fixup to the pci_map_uio which - wasn't settings lengths correctly. - - - -2004-11-25 21:15 davidm - - * ixp4xx/ixp4xx.c: - document why using a new context for each packet is actually a - better idea than allocating one (actually two) per session. - - - -2004-11-25 08:48 davidm - - * README, README.sglinux: - updates from email with Intel to fix a few little things - - -2004-11-25 00:02 davidm - - * README, README.sglinux, safe/safe.c: - Some cleanups of doc and so on for Intel/General use - -2004-11-23 07:58 davidm - - * TODO: - safenet is working on big endian machines now - - - -2004-11-23 07:56 davidm - - * ixp4xx/: Makefile, ixp4xx.c: - Reference the Intel library, cleanup the IV sizes and turn on AES. - Fix Makefile for new config options. - - - -2004-11-23 07:52 davidm - - * Makefile: - Complete the changes of ixp to ixp4xx (IXP4xx) as appropriate - - -2004-11-23 00:33 davidm - - * Makefile, README, ixp4xx/Makefile: - Changes all references to ixp to be ixp4xx at Intels request - - -2004-11-20 01:07 davidm - - * safe/: safe.c, safereg.h: - fully working safenet on BE machines - -2004-11-19 01:03 davidm - - * Makefile, hifn/Makefile, hifn/hifn7751.c, hifn/hifn7751reg.h, - hifn/hifn7751var.h: - hifn driver code complete and compiling, needs a test now ;-) - - -2004-11-18 21:45 davidm - - * hifn/: Makefile, hifn7751.c, hifn7751var.h: - Makefile for building the hifn driver - -2004-11-18 21:44 davidm - - * hifn/: hifn7751.c, hifn7751reg.h, hifn7751var.h: - Checkin the orginal freebsd source for the hifn driver as a - reference in the future. - - - -2004-11-18 10:05 davidm - - * Makefile, README, TODO, criov.c, crypto.c, cryptodev.c, - cryptodev.h, cryptosoft.c, uio.h, ixp4xx/Makefile, ixp4xx/ixp4xx.c, - safe/Makefile, safe/safe.c, safe/safevar.h: - Clean up license and copyright info to be more acceptable (and - present) Clean up debug and trace Fixup memory freeing etc on - safenet Fix compiler warnings (some were bugs) - - - -2004-11-17 02:23 davidm - - * safe/safe.c: - working on Xscale (big endian) now but packet data is getting - stuffed up due to endian problems (at least now we are talking to - the chip correctly for BE). Good enough to test packet throughput, - no good for testing scp. - - - -2004-11-17 02:21 davidm - - * criov.c: - Make sure public symbols are exported by including the correct - header files - -2004-11-17 02:15 davidm - - * crypto.c: - even better cleanup of kernel threads on exit - -2004-11-17 02:15 davidm - - * cryptosoft.c: - return some trace to debug so it doesn't appear - -2004-11-17 02:14 davidm - - * Makefile: - Make sure all drivers get built, not just IXP - -2004-11-16 21:31 davidm - - * crypto.c: - Fix problem with reboots and driver not unloading cleanly, we were - not handling signals correctly in the kernel threads, - -2004-11-10 10:46 davidm - - * ixp4xx/ixp4xx.c: - fix serious context leak, itturns out the context is still - considered busy while it is calling the perform callback, so we - cleanup on closing the session and on allocating the next context - to work around this. - - - -2004-11-10 05:26 davidm - - * crypto.c, cryptodev.c, ixp4xx/ixp4xx.c, safe/safe.c: - cleaned out some debug, found MAX tunnels bug, traced it various - other cleanups. - - - -2004-11-10 04:02 davidm - - * cryptodev.c, cryptosoft.c, ixp4xx/ixp4xx.c, safe/Makefile, - safe/safe.c: - Fix up kmalloc usage to always zero resulting buffer everywhere - (stops crashes in ixp) - - Add some function debug to ixp so you can see it working - - Fix safe driver to build and install in a real tree. - - - -2004-11-10 02:27 davidm - - * Makefile, criov.c, crypto.c, cryptosoft.c, ixp4xx/Makefile, - ixp4xx/ixp4xx.c: - Compiling OCF modules for the IXP crypto, needs testing now - - -2004-11-09 19:16 davidm - - * criov.c, crypto.c, cryptodev.c, cryptodev.h, cryptosoft.c, - cryptosoft.h, uio.h, safe/safe.c, safe/safevar.h: - The linux port of OCF with working safenet and software modules. - Still some bugs with mutiple crypto threads using the safenet - driver. - - - -2004-11-09 18:49 davidm - - * Makefile, criov.c, crypto.c, cryptodev.c, cryptodev.h, - cryptosoft.c, cryptosoft.h, uio.h, safe/Makefile, safe/safe.c, - safe/safereg.h, safe/safevar.h: - Check in the orginal free-bsd sources for the OCF support. This - allows us to diff against it later to see if we botched anything - major league. - - - |