aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch')
-rw-r--r--target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch145
1 files changed, 145 insertions, 0 deletions
diff --git a/target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch b/target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch
new file mode 100644
index 0000000000..c08135c947
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch
@@ -0,0 +1,145 @@
+From: Marcin Jurkowski <marcin1j@gmail.com>
+Date: Thu, 31 Oct 2013 22:33:10 +0000
+Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL
+ router
+
+This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
+router.
+It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
+modem equipped with 64 MiB RAM and 8 MiB flash.
+
+Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
+---
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1482,6 +1482,122 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct board_info __initdata board_FAST2704V2 = {
++ .name = "F@ST2704V2",
++ .expected_cpu_id = 0x6328,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .has_usbd = 1,
++
++ .has_enetsw = 1,
++
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++
++ .leds = {
++ /* front LEDs */
++ {
++ .name = "F@ST2704V2:green:power",
++ .gpio = 4,
++ .active_low = 1,
++ .default_trigger = "default-on",
++ },
++ {
++ .name = "F@ST2704V2:red:power",
++ .gpio = 5,
++ .active_low = 1,
++ },
++ {
++ .name = "F@ST2704V2:red:inet",
++ .gpio = 2,
++ .active_low = 1,
++ },
++ {
++ .name = "F@ST2704V2:green:dsl",
++ .gpio = 3,
++ .active_low = 1,
++ },
++ {
++ .name = "F@ST2704V2:green:inet",
++ .gpio = 11,
++ .active_low = 1,
++ },
++ {
++ .name = "F@ST2704V2:green:usb",
++ .gpio = 1,
++ .active_low = 1,
++ },
++
++ /* side button LEDs */
++ {
++ .name = "F@ST2704V2:green:wps",
++ .gpio = 10,
++ .active_low = 1,
++ },
++
++ /* FIXME: can't control gpio0 line in "out" state, needs further investigation */
++ /*
++ {
++ .name = "F@ST2704V2:green:rfkill",
++ .gpio = 0,
++ .active_low = 1,
++ },
++ */
++
++ },
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 23,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++ },
++ {
++ .desc = "wps",
++ .gpio = 24,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++ },
++ {
++ .desc = "rfkill",
++ .gpio = 15,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_WLAN,
++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++ },
++ },
++};
++
+ static struct board_info __initdata board_rta1025w_16 = {
+ .name = "RTA1025W_16",
+ .expected_cpu_id = 0x6348,
+@@ -3842,6 +3958,7 @@ static const struct board_info __initcon
+ &board_963281TAN,
+ &board_963281T_TEF,
+ &board_dsl_274xb_f1,
++ &board_FAST2704V2,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+ &board_96338gw,