aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch')
-rw-r--r--target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch86
1 files changed, 0 insertions, 86 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch b/target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch
deleted file mode 100644
index a2857fecbb..0000000000
--- a/target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch
+++ /dev/null
@@ -1,86 +0,0 @@
---- a/drivers/ssb/driver_chipcommon.c
-+++ b/drivers/ssb/driver_chipcommon.c
-@@ -403,6 +403,7 @@
- unsigned int irq;
- u32 baud_base, div;
- u32 i, n;
-+ unsigned int ccrev = cc->dev->id.revision;
-
- plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
- irq = ssb_mips_irq(cc->dev);
-@@ -414,14 +415,39 @@
- chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
- div = 1;
- } else {
-- if (cc->dev->id.revision >= 11) {
-+ if (ccrev == 20) {
-+ /* BCM5354 uses constant 25MHz clock */
-+ baud_base = 25000000;
-+ div = 48;
-+ /* Set the override bit so we don't divide it */
-+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
-+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
-+ | SSB_CHIPCO_CORECTL_UARTCLK0);
-+ } else if ((ccrev >= 11) && (ccrev != 15)) {
- /* Fixed ALP clock */
- baud_base = 20000000;
-+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
-+ /* FIXME: baud_base is different for devices with a PMU */
-+ SSB_WARN_ON(1);
-+ }
- div = 1;
-+ if (ccrev >= 21) {
-+ /* Turn off UART clock before switching clocksource. */
-+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
-+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
-+ & ~SSB_CHIPCO_CORECTL_UARTCLKEN);
-+ }
- /* Set the override bit so we don't divide it */
- chipco_write32(cc, SSB_CHIPCO_CORECTL,
-- SSB_CHIPCO_CORECTL_UARTCLK0);
-- } else if (cc->dev->id.revision >= 3) {
-+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
-+ | SSB_CHIPCO_CORECTL_UARTCLK0);
-+ if (ccrev >= 21) {
-+ /* Re-enable the UART clock. */
-+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
-+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
-+ | SSB_CHIPCO_CORECTL_UARTCLKEN);
-+ }
-+ } else if (ccrev >= 3) {
- /* Internal backplane clock */
- baud_base = ssb_clockspeed(bus);
- div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
-@@ -433,7 +459,7 @@
- }
-
- /* Clock source depends on strapping if UartClkOverride is unset */
-- if ((cc->dev->id.revision > 0) &&
-+ if ((ccrev > 0) &&
- !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
- if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
- SSB_CHIPCO_CAP_UARTCLK_INT) {
-@@ -455,7 +481,7 @@
- cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
- uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
- /* Offset changed at after rev 0 */
-- if (cc->dev->id.revision == 0)
-+ if (ccrev == 0)
- uart_regs += (i * 8);
- else
- uart_regs += (i * 256);
---- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -51,9 +51,12 @@
- #define SSB_CHIPCO_CAP_JTAGM 0x00400000 /* JTAG master present */
- #define SSB_CHIPCO_CAP_BROM 0x00800000 /* Internal boot ROM active */
- #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
-+#define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
-+#define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
- #define SSB_CHIPCO_CORECTL 0x0008
- #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
- #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
-+#define SSB_CHIPCO_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */
- #define SSB_CHIPCO_BIST 0x000C
- #define SSB_CHIPCO_OTPS 0x0010 /* OTP status */
- #define SSB_CHIPCO_OTPS_PROGFAIL 0x80000000