aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.4/0032-MMC-added-alternative-MMC-driver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.4/0032-MMC-added-alternative-MMC-driver.patch')
-rw-r--r--target/linux/brcm2708/patches-4.4/0032-MMC-added-alternative-MMC-driver.patch1691
1 files changed, 1691 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.4/0032-MMC-added-alternative-MMC-driver.patch b/target/linux/brcm2708/patches-4.4/0032-MMC-added-alternative-MMC-driver.patch
new file mode 100644
index 0000000000..e74c70c124
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.4/0032-MMC-added-alternative-MMC-driver.patch
@@ -0,0 +1,1691 @@
+From 65c8aadfd88010efb2d2a2821fea7aac978b6c78 Mon Sep 17 00:00:00 2001
+From: gellert <gellert@raspberrypi.org>
+Date: Fri, 15 Aug 2014 16:35:06 +0100
+Subject: [PATCH 032/232] MMC: added alternative MMC driver
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+mmc: Disable CMD23 transfers on all cards
+
+Pending wire-level investigation of these types of transfers
+and associated errors on bcm2835-mmc, disable for now. Fallback of
+CMD18/CMD25 transfers will be used automatically by the MMC layer.
+
+Reported/Tested-by: Gellert Weisz <gellert@raspberrypi.org>
+
+mmc: bcm2835-mmc: enable DT support for all architectures
+
+Both ARCH_BCM2835 and ARCH_BCM270x are built with OF now.
+Enable Device Tree support for all architectures.
+
+Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
+
+mmc: bcm2835-mmc: fix probe error handling
+
+Probe error handling is broken in several places.
+Simplify error handling by using device managed functions.
+Replace pr_{err,info} with dev_{err,info}.
+
+Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
+
+bcm2835-mmc: Add locks when accessing sdhost registers
+
+bcm2835-mmc: Add range of debug options for slowing things down
+
+bcm2835-mmc: Add option to disable some delays
+
+bcm2835-mmc: Add option to disable MMC_QUIRK_BLK_NO_CMD23
+
+bcm2835-mmc: Default to disabling MMC_QUIRK_BLK_NO_CMD23
+
+bcm2835-mmc: Adding overclocking option
+
+Allow a different clock speed to be substitued for a requested 50MHz.
+This option is exposed using the "overclock_50" DT parameter.
+Note that the mmc interface is restricted to EVEN integer divisions of
+250MHz, and the highest sensible option is 63 (250/4 = 62.5), the
+next being 125 (250/2) which is much too high.
+
+Use at your own risk.
+
+bcm2835-mmc: Round up the overclock, so 62 works for 62.5Mhz
+
+Also only warn once for each overclock setting.
+
+mmc: bcm2835-mmc: Make available on ARCH_BCM2835
+
+Make the bcm2835-mmc driver available for use on ARCH_BCM2835.
+
+Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
+
+BCM270x_DT: add bcm2835-mmc entry
+
+Add Device Tree entry for bcm2835-mmc.
+In non-DT mode, don't add the device in the board file.
+
+Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
+
+bcm2835-mmc: Don't overwrite MMC capabilities from DT
+---
+ drivers/mmc/core/quirks.c | 6 +
+ drivers/mmc/host/Kconfig | 29 +
+ drivers/mmc/host/Makefile | 1 +
+ drivers/mmc/host/bcm2835-mmc.c | 1542 ++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 1578 insertions(+)
+ create mode 100644 drivers/mmc/host/bcm2835-mmc.c
+
+--- a/drivers/mmc/core/quirks.c
++++ b/drivers/mmc/core/quirks.c
+@@ -53,6 +53,7 @@ static const struct mmc_fixup mmc_fixup_
+
+ void mmc_fixup_device(struct mmc_card *card, const struct mmc_fixup *table)
+ {
++ extern unsigned mmc_debug;
+ const struct mmc_fixup *f;
+ u64 rev = cid_rev_card(card);
+
+@@ -77,5 +78,10 @@ void mmc_fixup_device(struct mmc_card *c
+ f->vendor_fixup(card, f->data);
+ }
+ }
++ /* SDHCI on BCM2708 - bug causes a certain sequence of CMD23 operations to fail.
++ * Disable this flag for all cards (fall-back to CMD25/CMD18 multi-block transfers).
++ */
++ if (mmc_debug & (1<<13))
++ card->quirks |= MMC_QUIRK_BLK_NO_CMD23;
+ }
+ EXPORT_SYMBOL(mmc_fixup_device);
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -4,6 +4,35 @@
+
+ comment "MMC/SD/SDIO Host Controller Drivers"
+
++config MMC_BCM2835
++ tristate "MMC support on BCM2835"
++ depends on MACH_BCM2708 || MACH_BCM2709 || ARCH_BCM2835
++ help
++ This selects the MMC Interface on BCM2835.
++
++ If you have a controller with this interface, say Y or M here.
++
++ If unsure, say N.
++
++config MMC_BCM2835_DMA
++ bool "DMA support on BCM2835 Arasan controller"
++ depends on MMC_BCM2835
++ help
++ Enable DMA support on the Arasan SDHCI controller in Broadcom 2708
++ based chips.
++
++ If unsure, say N.
++
++config MMC_BCM2835_PIO_DMA_BARRIER
++ int "Block count limit for PIO transfers"
++ depends on MMC_BCM2835 && MMC_BCM2835_DMA
++ range 0 256
++ default 2
++ help
++ The inclusive limit in bytes under which PIO will be used instead of DMA
++
++ If unsure, say 2 here.
++
+ config MMC_ARMMMCI
+ tristate "ARM AMBA Multimedia Card Interface support"
+ depends on ARM_AMBA
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c
+ obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o
+ obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci_f_sdh30.o
+ obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
++obj-$(CONFIG_MMC_BCM2835) += bcm2835-mmc.o
+ obj-$(CONFIG_MMC_WBSD) += wbsd.o
+ obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
+ obj-$(CONFIG_MMC_MTK) += mtk-sd.o
+--- /dev/null
++++ b/drivers/mmc/host/bcm2835-mmc.c
+@@ -0,0 +1,1542 @@
++/*
++ * BCM2835 MMC host driver.
++ *
++ * Author: Gellert Weisz <gellert@raspberrypi.org>
++ * Copyright 2014
++ *
++ * Based on
++ * sdhci-bcm2708.c by Broadcom
++ * sdhci-bcm2835.c by Stephen Warren and Oleksandr Tymoshenko
++ * sdhci.c and sdhci-pci.c by Pierre Ossman
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms and conditions of the GNU General Public License,
++ * version 2, as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/delay.h>
++#include <linux/module.h>
++#include <linux/io.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/host.h>
++#include <linux/mmc/sd.h>
++#include <linux/scatterlist.h>
++#include <linux/of_address.h>
++#include <linux/of_irq.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <linux/err.h>
++#include <linux/blkdev.h>
++#include <linux/dmaengine.h>
++#include <linux/dma-mapping.h>
++#include <linux/of_dma.h>
++
++#include "sdhci.h"
++
++
++#define DRIVER_NAME "mmc-bcm2835"
++
++#define DBG(f, x...) \
++pr_debug(DRIVER_NAME " [%s()]: " f, __func__, ## x)
++
++#ifndef CONFIG_MMC_BCM2835_DMA
++ #define FORCE_PIO
++#endif
++
++
++/* the inclusive limit in bytes under which PIO will be used instead of DMA */
++#ifdef CONFIG_MMC_BCM2835_PIO_DMA_BARRIER
++#define PIO_DMA_BARRIER CONFIG_MMC_BCM2835_PIO_DMA_BARRIER
++#else
++#define PIO_DMA_BARRIER 00
++#endif
++
++#define MIN_FREQ 400000
++#define TIMEOUT_VAL 0xE
++#define BCM2835_SDHCI_WRITE_DELAY(f) (((2 * 1000000) / f) + 1)
++
++
++unsigned mmc_debug;
++unsigned mmc_debug2;
++
++struct bcm2835_host {
++ spinlock_t lock;
++
++ void __iomem *ioaddr;
++ u32 bus_addr;
++
++ struct mmc_host *mmc;
++
++ u32 timeout;
++
++ int clock; /* Current clock speed */
++ u8 pwr; /* Current voltage */
++
++ unsigned int max_clk; /* Max possible freq */
++ unsigned int timeout_clk; /* Timeout freq (KHz) */
++ unsigned int clk_mul; /* Clock Muliplier value */
++
++ struct tasklet_struct finish_tasklet; /* Tasklet structures */
++
++ struct timer_list timer; /* Timer for timeouts */
++
++ struct sg_mapping_iter sg_miter; /* SG state for PIO */
++ unsigned int blocks; /* remaining PIO blocks */
++
++ int irq; /* Device IRQ */
++
++
++ u32 ier; /* cached registers */
++
++ struct mmc_request *mrq; /* Current request */
++ struct mmc_command *cmd; /* Current command */
++ struct mmc_data *data; /* Current data request */
++ unsigned int data_early:1; /* Data finished before cmd */
++
++ wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */
++
++ u32 thread_isr;
++
++ u32 shadow;
++
++ /*DMA part*/
++ struct dma_chan *dma_chan_rx; /* DMA channel for reads */
++ struct dma_chan *dma_chan_tx; /* DMA channel for writes */
++ struct dma_async_tx_descriptor *tx_desc; /* descriptor */
++
++ bool have_dma;
++ bool use_dma;
++ /*end of DMA part*/
++
++ int max_delay; /* maximum length of time spent waiting */
++
++ int flags; /* Host attributes */
++#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
++#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
++#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */
++#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */
++#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
++
++ u32 overclock_50; /* frequency to use when 50MHz is requested (in MHz) */
++ u32 max_overclock; /* Highest reported */
++};
++
++
++static inline void bcm2835_mmc_writel(struct bcm2835_host *host, u32 val, int reg, int from)
++{
++ unsigned delay;
++ lockdep_assert_held_once(&host->lock);
++ writel(val, host->ioaddr + reg);
++ udelay(BCM2835_SDHCI_WRITE_DELAY(max(host->clock, MIN_FREQ)));
++
++ delay = ((mmc_debug >> 16) & 0xf) << ((mmc_debug >> 20) & 0xf);
++ if (delay && !((1<<from) & mmc_debug2))
++ udelay(delay);
++}
++
++static inline void mmc_raw_writel(struct bcm2835_host *host, u32 val, int reg)
++{
++ unsigned delay;
++ lockdep_assert_held_once(&host->lock);
++ writel(val, host->ioaddr + reg);
++
++ delay = ((mmc_debug >> 24) & 0xf) << ((mmc_debug >> 28) & 0xf);
++ if (delay)
++ udelay(delay);
++}
++
++static inline u32 bcm2835_mmc_readl(struct bcm2835_host *host, int reg)
++{
++ lockdep_assert_held_once(&host->lock);
++ return readl(host->ioaddr + reg);
++}
++
++static inline void bcm2835_mmc_writew(struct bcm2835_host *host, u16 val, int reg)
++{
++ u32 oldval = (reg == SDHCI_COMMAND) ? host->shadow :
++ bcm2835_mmc_readl(host, reg & ~3);
++ u32 word_num = (reg >> 1) & 1;
++ u32 word_shift = word_num * 16;
++ u32 mask = 0xffff << word_shift;
++ u32 newval = (oldval & ~mask) | (val << word_shift);
++
++ if (reg == SDHCI_TRANSFER_MODE)
++ host->shadow = newval;
++ else
++ bcm2835_mmc_writel(host, newval, reg & ~3, 0);
++
++}
++
++static inline void bcm2835_mmc_writeb(struct bcm2835_host *host, u8 val, int reg)
++{
++ u32 oldval = bcm2835_mmc_readl(host, reg & ~3);
++ u32 byte_num = reg & 3;
++ u32 byte_shift = byte_num * 8;
++ u32 mask = 0xff << byte_shift;
++ u32 newval = (oldval & ~mask) | (val << byte_shift);
++
++ bcm2835_mmc_writel(host, newval, reg & ~3, 1);
++}
++
++
++static inline u16 bcm2835_mmc_readw(struct bcm2835_host *host, int reg)
++{
++ u32 val = bcm2835_mmc_readl(host, (reg & ~3));
++ u32 word_num = (reg >> 1) & 1;
++ u32 word_shift = word_num * 16;
++ u32 word = (val >> word_shift) & 0xffff;
++
++ return word;
++}
++
++static inline u8 bcm2835_mmc_readb(struct bcm2835_host *host, int reg)
++{
++ u32 val = bcm2835_mmc_readl(host, (reg & ~3));
++ u32 byte_num = reg & 3;
++ u32 byte_shift = byte_num * 8;
++ u32 byte = (val >> byte_shift) & 0xff;
++
++ return byte;
++}
++
++static void bcm2835_mmc_unsignal_irqs(struct bcm2835_host *host, u32 clear)
++{
++ u32 ier;
++
++ ier = bcm2835_mmc_readl(host, SDHCI_SIGNAL_ENABLE);
++ ier &= ~clear;
++ /* change which requests generate IRQs - makes no difference to
++ the content of SDHCI_INT_STATUS, or the need to acknowledge IRQs */
++ bcm2835_mmc_writel(host, ier, SDHCI_SIGNAL_ENABLE, 2);
++}
++
++
++static void bcm2835_mmc_dumpregs(struct bcm2835_host *host)
++{
++ pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
++ mmc_hostname(host->mmc));
++
++ pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
++ bcm2835_mmc_readl(host, SDHCI_DMA_ADDRESS),
++ bcm2835_mmc_readw(host, SDHCI_HOST_VERSION));
++ pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
++ bcm2835_mmc_readw(host, SDHCI_BLOCK_SIZE),
++ bcm2835_mmc_readw(host, SDHCI_BLOCK_COUNT));
++ pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
++ bcm2835_mmc_readl(host, SDHCI_ARGUMENT),
++ bcm2835_mmc_readw(host, SDHCI_TRANSFER_MODE));
++ pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
++ bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE),
++ bcm2835_mmc_readb(host, SDHCI_HOST_CONTROL));
++ pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
++ bcm2835_mmc_readb(host, SDHCI_POWER_CONTROL),
++ bcm2835_mmc_readb(host, SDHCI_BLOCK_GAP_CONTROL));
++ pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
++ bcm2835_mmc_readb(host, SDHCI_WAKE_UP_CONTROL),
++ bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL));
++ pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
++ bcm2835_mmc_readb(host, SDHCI_TIMEOUT_CONTROL),
++ bcm2835_mmc_readl(host, SDHCI_INT_STATUS));
++ pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
++ bcm2835_mmc_readl(host, SDHCI_INT_ENABLE),
++ bcm2835_mmc_readl(host, SDHCI_SIGNAL_ENABLE));
++ pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
++ bcm2835_mmc_readw(host, SDHCI_ACMD12_ERR),
++ bcm2835_mmc_readw(host, SDHCI_SLOT_INT_STATUS));
++ pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
++ bcm2835_mmc_readl(host, SDHCI_CAPABILITIES),
++ bcm2835_mmc_readl(host, SDHCI_CAPABILITIES_1));
++ pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
++ bcm2835_mmc_readw(host, SDHCI_COMMAND),
++ bcm2835_mmc_readl(host, SDHCI_MAX_CURRENT));
++ pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
++ bcm2835_mmc_readw(host, SDHCI_HOST_CONTROL2));
++
++ pr_debug(DRIVER_NAME ": ===========================================\n");
++}
++
++
++static void bcm2835_mmc_reset(struct bcm2835_host *host, u8 mask)
++{
++ unsigned long timeout;
++ unsigned long flags;
++
++ spin_lock_irqsave(&host->lock, flags);
++ bcm2835_mmc_writeb(host, mask, SDHCI_SOFTWARE_RESET);
++
++ if (mask & SDHCI_RESET_ALL)
++ host->clock = 0;
++
++ /* Wait max 100 ms */
++ timeout = 100;
++
++ /* hw clears the bit when it's done */
++ while (bcm2835_mmc_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
++ if (timeout == 0) {
++ pr_err("%s: Reset 0x%x never completed.\n",
++ mmc_hostname(host->mmc), (int)mask);
++ bcm2835_mmc_dumpregs(host);
++ return;
++ }
++ timeout--;
++ spin_unlock_irqrestore(&host->lock, flags);
++ mdelay(1);
++ spin_lock_irqsave(&host->lock, flags);
++ }
++
++ if (100-timeout > 10 && 100-timeout > host->max_delay) {
++ host->max_delay = 100-timeout;
++ pr_warning("Warning: MMC controller hung for %d ms\n", host->max_delay);
++ }
++ spin_unlock_irqrestore(&host->lock, flags);
++}
++
++static void bcm2835_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
++
++static void bcm2835_mmc_init(struct bcm2835_host *host, int soft)
++{
++ unsigned long flags;
++ if (soft)
++ bcm2835_mmc_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA);
++ else
++ bcm2835_mmc_reset(host, SDHCI_RESET_ALL);
++
++ host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
++ SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT |
++ SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC |
++ SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END |
++ SDHCI_INT_RESPONSE;
++
++ spin_lock_irqsave(&host->lock, flags);
++ bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE, 3);
++ bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE, 3);
++ spin_unlock_irqrestore(&host->lock, flags);
++
++ if (soft) {
++ /* force clock reconfiguration */
++ host->clock = 0;
++ bcm2835_mmc_set_ios(host->mmc, &host->mmc->ios);
++ }
++}
++
++
++
++static void bcm2835_mmc_finish_data(struct bcm2835_host *host);
++
++static void bcm2835_mmc_dma_complete(void *param)
++{
++ struct bcm2835_host *host = param;
++ struct dma_chan *dma_chan;
++ unsigned long flags;
++ u32 dir_data;
++
++ spin_lock_irqsave(&host->lock, flags);
++
++ if (host->data && !(host->data->flags & MMC_DATA_WRITE)) {
++ /* otherwise handled in SDHCI IRQ */
++ dma_chan = host->dma_chan_rx;
++ dir_data = DMA_FROM_DEVICE;
++
++ dma_unmap_sg(dma_chan->device->dev,
++ host->data->sg, host->data->sg_len,
++ dir_data);
++
++ bcm2835_mmc_finish_data(host);
++ }
++
++ spin_unlock_irqrestore(&host->lock, flags);
++}
++
++static void bcm2835_bcm2835_mmc_read_block_pio(struct bcm2835_host *host)
++{
++ unsigned long flags;
++ size_t blksize, len, chunk;
++
++ u32 uninitialized_var(scratch);
++ u8 *buf;
++
++ blksize = host->data->blksz;
++ chunk = 0;
++
++ local_irq_save(flags);
++
++ while (blksize) {
++ if (!sg_miter_next(&host->sg_miter))
++ BUG();
++
++ len = min(host->sg_miter.length, blksize);
++
++ blksize -= len;
++ host->sg_miter.consumed = len;
++
++ buf = host->sg_miter.addr;
++
++ while (len) {
++ if (chunk == 0) {
++ scratch = bcm2835_mmc_readl(host, SDHCI_BUFFER);
++ chunk = 4;
++ }
++
++ *buf = scratch & 0xFF;
++
++ buf++;
++ scratch >>= 8;
++ chunk--;
++ len--;
++ }
++ }
++
++ sg_miter_stop(&host->sg_miter);
++
++ local_irq_restore(flags);
++}
++
++static void bcm2835_bcm2835_mmc_write_block_pio(struct bcm2835_host *host)
++{
++ unsigned long flags;
++ size_t blksize, len, chunk;
++ u32 scratch;
++ u8 *buf;
++
++ blksize = host->data->blksz;
++ chunk = 0;
++ chunk = 0;
++ scratch = 0;
++
++ local_irq_save(flags);
++
++ while (blksize) {
++ if (!sg_miter_next(&host->sg_miter))
++ BUG();
++
++ len = min(host->sg_miter.length, blksize);
++
++ blksize -= len;
++ host->sg_miter.consumed = len;
++
++ buf = host->sg_miter.addr;
++
++ while (len) {
++ scratch |= (u32)*buf << (chunk * 8);
++
++ buf++;
++ chunk++;
++ len--;
++
++ if ((chunk == 4) || ((len == 0) && (blksize == 0))) {
++ mmc_raw_writel(host, scratch, SDHCI_BUFFER);
++ chunk = 0;
++ scratch = 0;
++ }
++ }
++ }
++
++ sg_miter_stop(&host->sg_miter);
++
++ local_irq_restore(flags);
++}
++
++
++static void bcm2835_mmc_transfer_pio(struct bcm2835_host *host)
++{
++ u32 mask;
++
++ BUG_ON(!host->data);
++
++ if (host->blocks == 0)
++ return;
++
++ if (host->data->flags & MMC_DATA_READ)
++ mask = SDHCI_DATA_AVAILABLE;
++ else
++ mask = SDHCI_SPACE_AVAILABLE;
++
++ while (bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE) & mask) {
++
++ if (host->data->flags & MMC_DATA_READ)
++ bcm2835_bcm2835_mmc_read_block_pio(host);
++ else
++ bcm2835_bcm2835_mmc_write_block_pio(host);
++
++ host->blocks--;
++
++ /* QUIRK used in sdhci.c removes the 'if' */
++ /* but it seems this is unnecessary */
++ if (host->blocks == 0)
++ break;
++
++
++ }
++}
++
++
++static void bcm2835_mmc_transfer_dma(struct bcm2835_host *host)
++{
++ u32 len, dir_data, dir_slave;
++ struct dma_async_tx_descriptor *desc = NULL;
++ struct dma_chan *dma_chan;
++
++
++ WARN_ON(!host->data);
++
++ if (!host->data)
++ return;
++
++ if (host->blocks == 0)
++ return;
++
++ if (host->data->flags & MMC_DATA_READ) {
++ dma_chan = host->dma_chan_rx;
++ dir_data = DMA_FROM_DEVICE;
++ dir_slave = DMA_DEV_TO_MEM;
++ } else {
++ dma_chan = host->dma_chan_tx;
++ dir_data = DMA_TO_DEVICE;
++ dir_slave = DMA_MEM_TO_DEV;
++ }
++
++ BUG_ON(!dma_chan->device);
++ BUG_ON(!dma_chan->device->dev);
++ BUG_ON(!host->data->sg);
++
++ len = dma_map_sg(dma_chan->device->dev, host->data->sg,
++ host->data->sg_len, dir_data);
++ if (len > 0) {
++ desc = dmaengine_prep_slave_sg(dma_chan, host->data->sg,
++ len, dir_slave,
++ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
++ } else {
++ dev_err(mmc_dev(host->mmc), "dma_map_sg returned zero length\n");
++ }
++ if (desc) {
++ unsigned long flags;
++ spin_lock_irqsave(&host->lock, flags);
++ bcm2835_mmc_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL |
++ SDHCI_INT_SPACE_AVAIL);
++ host->tx_desc = desc;
++ desc->callback = bcm2835_mmc_dma_complete;
++ desc->callback_param = host;
++ spin_unlock_irqrestore(&host->lock, flags);
++ dmaengine_submit(desc);
++ dma_async_issue_pending(dma_chan);
++ }
++
++}
++
++
++
++static void bcm2835_mmc_set_transfer_irqs(struct bcm2835_host *host)
++{
++ u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
++ u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
++
++ if (host->use_dma)
++ host->ier = (host->ier & ~pio_irqs) | dma_irqs;
++ else
++ host->ier = (host->ier & ~dma_irqs) | pio_irqs;
++
++ bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE, 4);
++ bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE, 4);
++}
++
++
++static void bcm2835_mmc_prepare_data(struct bcm2835_host *host, struct mmc_command *cmd)
++{
++ u8 count;
++ struct mmc_data *data = cmd->data;
++
++ WARN_ON(host->data);
++
++ if (data || (cmd->flags & MMC_RSP_BUSY)) {
++ count = TIMEOUT_VAL;
++ bcm2835_mmc_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
++ }
++
++ if (!data)
++ return;
++
++ /* Sanity checks */
++ BUG_ON(data->blksz * data->blocks > 524288);
++ BUG_ON(data->blksz > host->mmc->max_blk_size);
++ BUG_ON(data->blocks > 65535);
++
++ host->data = data;
++ host->data_early = 0;
++ host->data->bytes_xfered = 0;
++
++
++ if (!(host->flags & SDHCI_REQ_USE_DMA)) {
++ int flags;
++
++ flags = SG_MITER_ATOMIC;
++ if (host->data->flags & MMC_DATA_READ)
++ flags |= SG_MITER_TO_SG;
++ else
++ flags |= SG_MITER_FROM_SG;
++ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
++ host->blocks = data->blocks;
++ }
++
++ host->use_dma = host->have_dma && data->blocks > PIO_DMA_BARRIER;
++
++ bcm2835_mmc_set_transfer_irqs(host);
++
++ /* Set the DMA boundary value and block size */
++ bcm2835_mmc_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
++ data->blksz), SDHCI_BLOCK_SIZE);
++ bcm2835_mmc_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
++
++ BUG_ON(!host->data);
++}
++
++static void bcm2835_mmc_set_transfer_mode(struct bcm2835_host *host,
++ struct mmc_command *cmd)
++{
++ u16 mode;
++ struct mmc_data *data = cmd->data;
++
++ if (data == NULL) {
++ /* clear Auto CMD settings for no data CMDs */
++ mode = bcm2835_mmc_readw(host, SDHCI_TRANSFER_MODE);
++ bcm2835_mmc_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
++ SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE);
++ return;
++ }
++
++ WARN_ON(!host->data);
++
++ mode = SDHCI_TRNS_BLK_CNT_EN;
++
++ if ((mmc_op_multi(cmd->opcode) || data->blocks > 1)) {
++ mode |= SDHCI_TRNS_MULTI;
++
++ /*
++ * If we are sending CMD23, CMD12 never gets sent
++ * on successful completion (so no Auto-CMD12).
++ */
++ if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12))
++ mode |= SDHCI_TRNS_AUTO_CMD12;
++ else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
++ mode |= SDHCI_TRNS_AUTO_CMD23;
++ bcm2835_mmc_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2, 5);
++ }
++ }
++
++ if (data->flags & MMC_DATA_READ)
++ mode |= SDHCI_TRNS_READ;
++ if (host->flags & SDHCI_REQ_USE_DMA)
++ mode |= SDHCI_TRNS_DMA;
++
++ bcm2835_mmc_writew(host, mode, SDHCI_TRANSFER_MODE);
++}
++
++void bcm2835_mmc_send_command(struct bcm2835_host *host, struct mmc_command *cmd)
++{
++ int flags;
++ u32 mask;
++ unsigned long timeout;
++
++ WARN_ON(host->cmd);
++
++ /* Wait max 10 ms */
++ timeout = 1000;
++
++ mask = SDHCI_CMD_INHIBIT;
++ if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
++ mask |= SDHCI_DATA_INHIBIT;
++
++ /* We shouldn't wait for data inihibit for stop commands, even
++ though they might use busy signaling */
++ if (host->mrq->data && (cmd == host->mrq->data->stop))
++ mask &= ~SDHCI_DATA_INHIBIT;
++
++ while (bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE) & mask) {
++ if (timeout == 0) {
++ pr_err("%s: Controller never released inhibit bit(s).\n",
++ mmc_hostname(host->mmc));
++ bcm2835_mmc_dumpregs(host);
++ cmd->error = -EIO;
++ tasklet_schedule(&host->finish_tasklet);
++ return;
++ }
++ timeout--;
++ udelay(10);
++ }
++
++ if ((1000-timeout)/100 > 1 && (1000-timeout)/100 > host->max_delay) {
++ host->max_delay = (1000-timeout)/100;
++ pr_warning("Warning: MMC controller hung for %d ms\n", host->max_delay);
++ }
++
++ timeout = jiffies;
++ if (!cmd->data && cmd->busy_timeout > 9000)
++ timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
++ else
++ timeout += 10 * HZ;
++ mod_timer(&host->timer, timeout);
++
++ host->cmd = cmd;
++
++ bcm2835_mmc_prepare_data(host, cmd);
++
++ bcm2835_mmc_writel(host, cmd->arg, SDHCI_ARGUMENT, 6);
++
++ bcm2835_mmc_set_transfer_mode(host, cmd);
++
++ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
++ pr_err("%s: Unsupported response type!\n",
++ mmc_hostname(host->mmc));
++ cmd->error = -EINVAL;
++ tasklet_schedule(&host->finish_tasklet);
++ return;
++ }
++
++ if (!(cmd->flags & MMC_RSP_PRESENT))
++ flags = SDHCI_CMD_RESP_NONE;
++ else if (cmd->flags & MMC_RSP_136)
++ flags = SDHCI_CMD_RESP_LONG;
++ else if (cmd->flags & MMC_RSP_BUSY)
++ flags = SDHCI_CMD_RESP_SHORT_BUSY;
++ else
++ flags = SDHCI_CMD_RESP_SHORT;
++
++ if (cmd->flags & MMC_RSP_CRC)
++ flags |= SDHCI_CMD_CRC;
++ if (cmd->flags & MMC_RSP_OPCODE)
++ flags |= SDHCI_CMD_INDEX;
++
++ if (cmd->data)
++ flags |= SDHCI_CMD_DATA;
++
++ bcm2835_mmc_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
++}
++
++
++static void bcm2835_mmc_finish_data(struct bcm2835_host *host)
++{
++ struct mmc_data *data;
++
++ BUG_ON(!host->data);
++
++ data = host->data;
++ host->data = NULL;
++
++ if (data->error)
++ data->bytes_xfered = 0;
++ else
++ data->bytes_xfered = data->blksz * data->blocks;
++
++ /*
++ * Need to send CMD12 if -
++ * a) open-ended multiblock transfer (no CMD23)
++ * b) error in multiblock transfer
++ */
++ if (data->stop &&
++ (data->error ||
++ !host->mrq->sbc)) {
++
++ /*
++ * The controller needs a reset of internal state machines
++ * upon error conditions.
++ */
++ if (data->error) {
++ bcm2835_mmc_reset(host, SDHCI_RESET_CMD);
++ bcm2835_mmc_reset(host, SDHCI_RESET_DATA);
++ }
++
++ bcm2835_mmc_send_command(host, data->stop);
++ } else
++ tasklet_schedule(&host->finish_tasklet);
++}
++
++static void bcm2835_mmc_finish_command(struct bcm2835_host *host)
++{
++ int i;
++
++ BUG_ON(host->cmd == NULL);
++
++ if (host->cmd->flags & MMC_RSP_PRESENT) {
++ if (host->cmd->flags & MMC_RSP_136) {
++ /* CRC is stripped so we need to do some shifting. */
++ for (i = 0; i < 4; i++) {
++ host->cmd->resp[i] = bcm2835_mmc_readl(host,
++ SDHCI_RESPONSE + (3-i)*4) << 8;
++ if (i != 3)
++ host->cmd->resp[i] |=
++ bcm2835_mmc_readb(host,
++ SDHCI_RESPONSE + (3-i)*4-1);
++ }
++ } else {
++ host->cmd->resp[0] = bcm2835_mmc_readl(host, SDHCI_RESPONSE);
++ }
++ }
++
++ host->cmd->error = 0;
++
++ /* Finished CMD23, now send actual command. */
++ if (host->cmd == host->mrq->sbc) {
++ host->cmd = NULL;
++ bcm2835_mmc_send_command(host, host->mrq->cmd);
++
++ if (host->mrq->cmd->data && host->use_dma) {
++ /* DMA transfer starts now, PIO starts after interrupt */
++ bcm2835_mmc_transfer_dma(host);
++ }
++ } else {
++
++ /* Processed actual command. */
++ if (host->data && host->data_early)
++ bcm2835_mmc_finish_data(host);
++
++ if (!host->cmd->data)
++ tasklet_schedule(&host->finish_tasklet);
++
++ host->cmd = NULL;
++ }
++}
++
++
++static void bcm2835_mmc_timeout_timer(unsigned long data)
++{
++ struct bcm2835_host *host;
++ unsigned long flags;
++
++ host = (struct bcm2835_host *)data;
++
++ spin_lock_irqsave(&host->lock, flags);
++
++ if (host->mrq) {
++ pr_err("%s: Timeout waiting for hardware interrupt.\n",
++ mmc_hostname(host->mmc));
++ bcm2835_mmc_dumpregs(host);
++
++ if (host->data) {
++ host->data->error = -ETIMEDOUT;
++ bcm2835_mmc_finish_data(host);
++ } else {
++ if (host->cmd)
++ host->cmd->error = -ETIMEDOUT;
++ else
++ host->mrq->cmd->error = -ETIMEDOUT;
++
++ tasklet_schedule(&host->finish_tasklet);
++ }
++ }
++
++ mmiowb();
++ spin_unlock_irqrestore(&host->lock, flags);
++}
++
++
++static void bcm2835_mmc_enable_sdio_irq_nolock(struct bcm2835_host *host, int enable)
++{
++ if (!(host->flags & SDHCI_DEVICE_DEAD)) {
++ if (enable)
++ host->ier |= SDHCI_INT_CARD_INT;
++ else
++ host->ier &= ~SDHCI_INT_CARD_INT;
++
++ bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE, 7);
++ bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE, 7);
++ mmiowb();
++ }
++}
++
++static void bcm2835_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
++{
++ struct bcm2835_host *host = mmc_priv(mmc);
++ unsigned long flags;
++
++ spin_lock_irqsave(&host->lock, flags);
++ if (enable)
++ host->flags |= SDHCI_SDIO_IRQ_ENABLED;
++ else
++ host->flags &= ~SDHCI_SDIO_IRQ_ENABLED;
++
++ bcm2835_mmc_enable_sdio_irq_nolock(host, enable);
++ spin_unlock_irqrestore(&host->lock, flags);
++}
++
++static void bcm2835_mmc_cmd_irq(struct bcm2835_host *host, u32 intmask)
++{
++
++ BUG_ON(intmask == 0);
++
++ if (!host->cmd) {
++ pr_err("%s: Got command interrupt 0x%08x even "
++ "though no command operation was in progress.\n",
++ mmc_hostname(host->mmc), (unsigned)intmask);
++ bcm2835_mmc_dumpregs(host);
++ return;
++ }
++
++ if (intmask & SDHCI_INT_TIMEOUT)
++ host->cmd->error = -ETIMEDOUT;
++ else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT |
++ SDHCI_INT_INDEX)) {
++ host->cmd->error = -EILSEQ;
++ }
++
++ if (host->cmd->error) {
++ tasklet_schedule(&host->finish_tasklet);
++ return;
++ }
++
++ if (intmask & SDHCI_INT_RESPONSE)
++ bcm2835_mmc_finish_command(host);
++
++}
++
++static void bcm2835_mmc_data_irq(struct bcm2835_host *host, u32 intmask)
++{
++ struct dma_chan *dma_chan;
++ u32 dir_data;
++
++ BUG_ON(intmask == 0);
++
++ if (!host->data) {
++ /*
++ * The "data complete" interrupt is also used to
++ * indicate that a busy state has ended. See comment
++ * above in sdhci_cmd_irq().
++ */
++ if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) {
++ if (intmask & SDHCI_INT_DATA_END) {
++ bcm2835_mmc_finish_command(host);
++ return;
++ }
++ }
++
++ pr_debug("%s: Got data interrupt 0x%08x even "
++ "though no data operation was in progress.\n",
++ mmc_hostname(host->mmc), (unsigned)intmask);
++ bcm2835_mmc_dumpregs(host);
++
++ return;
++ }
++
++ if (intmask & SDHCI_INT_DATA_TIMEOUT)
++ host->data->error = -ETIMEDOUT;
++ else if (intmask & SDHCI_INT_DATA_END_BIT)
++ host->data->error = -EILSEQ;
++ else if ((intmask & SDHCI_INT_DATA_CRC) &&
++ SDHCI_GET_CMD(bcm2835_mmc_readw(host, SDHCI_COMMAND))
++ != MMC_BUS_TEST_R)
++ host->data->error = -EILSEQ;
++
++ if (host->use_dma) {
++ if (host->data->flags & MMC_DATA_WRITE) {
++ /* IRQ handled here */
++
++ dma_chan = host->dma_chan_tx;
++ dir_data = DMA_TO_DEVICE;
++ dma_unmap_sg(dma_chan->device->dev,
++ host->data->sg, host->data->sg_len,
++ dir_data);
++
++ bcm2835_mmc_finish_data(host);
++ }
++
++ } else {
++ if (host->data->error)
++ bcm2835_mmc_finish_data(host);
++ else {
++ if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
++ bcm2835_mmc_transfer_pio(host);
++
++ if (intmask & SDHCI_INT_DATA_END) {
++ if (host->cmd) {
++ /*
++ * Data managed to finish before the
++ * command completed. Make sure we do
++ * things in the proper order.
++ */
++ host->data_early = 1;
++ } else {
++ bcm2835_mmc_finish_data(host);
++ }
++ }
++ }
++ }
++}
++
++
++static irqreturn_t bcm2835_mmc_irq(int irq, void *dev_id)
++{
++ irqreturn_t result = IRQ_NONE;
++ struct bcm2835_host *host = dev_id;
++ u32 intmask, mask, unexpected = 0;
++ int max_loops = 16;
++
++ spin_lock(&host->lock);
++
++ intmask = bcm2835_mmc_readl(host, SDHCI_INT_STATUS);
++
++ if (!intmask || intmask == 0xffffffff) {
++ result = IRQ_NONE;
++ goto out;
++ }
++
++ do {
++ /* Clear selected interrupts. */
++ mask = intmask & (SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
++ SDHCI_INT_BUS_POWER);
++ bcm2835_mmc_writel(host, mask, SDHCI_INT_STATUS, 8);
++
++
++ if (intmask & SDHCI_INT_CMD_MASK)
++ bcm2835_mmc_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
++
++ if (intmask & SDHCI_INT_DATA_MASK)
++ bcm2835_mmc_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
++
++ if (intmask & SDHCI_INT_BUS_POWER)
++ pr_err("%s: Card is consuming too much power!\n",
++ mmc_hostname(host->mmc));
++
++ if (intmask & SDHCI_INT_CARD_INT) {
++ bcm2835_mmc_enable_sdio_irq_nolock(host, false);
++ host->thread_isr |= SDHCI_INT_CARD_INT;
++ result = IRQ_WAKE_THREAD;
++ }
++
++ intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE |
++ SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
++ SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER |
++ SDHCI_INT_CARD_INT);
++
++ if (intmask) {
++ unexpected |= intmask;
++ bcm2835_mmc_writel(host, intmask, SDHCI_INT_STATUS, 9);
++ }
++
++ if (result == IRQ_NONE)
++ result = IRQ_HANDLED;
++
++ intmask = bcm2835_mmc_readl(host, SDHCI_INT_STATUS);
++ } while (intmask && --max_loops);
++out:
++ spin_unlock(&host->lock);
++
++ if (unexpected) {
++ pr_err("%s: Unexpected interrupt 0x%08x.\n",
++ mmc_hostname(host->mmc), unexpected);
++ bcm2835_mmc_dumpregs(host);
++ }
++
++ return result;
++}
++
++static irqreturn_t bcm2835_mmc_thread_irq(int irq, void *dev_id)
++{
++ struct bcm2835_host *host = dev_id;
++ unsigned long flags;
++ u32 isr;
++
++ spin_lock_irqsave(&host->lock, flags);
++ isr = host->thread_isr;
++ host->thread_isr = 0;
++ spin_unlock_irqrestore(&host->lock, flags);
++
++ if (isr & SDHCI_INT_CARD_INT) {
++ sdio_run_irqs(host->mmc);
++
++ spin_lock_irqsave(&host->lock, flags);
++ if (host->flags & SDHCI_SDIO_IRQ_ENABLED)
++ bcm2835_mmc_enable_sdio_irq_nolock(host, true);
++ spin_unlock_irqrestore(&host->lock, flags);
++ }
++
++ return isr ? IRQ_HANDLED : IRQ_NONE;
++}
++
++
++
++void bcm2835_mmc_set_clock(struct bcm2835_host *host, unsigned int clock)
++{
++ int div = 0; /* Initialized for compiler warning */
++ int real_div = div, clk_mul = 1;
++ u16 clk = 0;
++ unsigned long timeout;
++ unsigned int input_clock = clock;
++
++ if (host->overclock_50 && (clock == 50000000))
++ clock = host->overclock_50 * 1000000 + 999999;
++
++ host->mmc->actual_clock = 0;
++
++ bcm2835_mmc_writew(host, 0, SDHCI_CLOCK_CONTROL);
++
++ if (clock == 0)
++ return;
++
++ /* Version 3.00 divisors must be a multiple of 2. */
++ if (host->max_clk <= clock)
++ div = 1;
++ else {
++ for (div = 2; div < SDHCI_MAX_DIV_SPEC_300;
++ div += 2) {
++ if ((host->max_clk / div) <= clock)
++ break;
++ }
++ }
++
++ real_div = div;
++ div >>= 1;
++
++ if (real_div)
++ clock = (host->max_clk * clk_mul) / real_div;
++ host->mmc->actual_clock = clock;
++
++ if ((clock > input_clock) && (clock > host->max_overclock)) {
++ pr_warn("%s: Overclocking to %dHz\n",
++ mmc_hostname(host->mmc), clock);
++ host->max_overclock = clock;
++ }
++
++ clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
++ clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
++ << SDHCI_DIVIDER_HI_SHIFT;
++ clk |= SDHCI_CLOCK_INT_EN;
++ bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL);
++
++ /* Wait max 20 ms */
++ timeout = 20;
++ while (!((clk = bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL))
++ & SDHCI_CLOCK_INT_STABLE)) {
++ if (timeout == 0) {
++ pr_err("%s: Internal clock never "
++ "stabilised.\n", mmc_hostname(host->mmc));
++ bcm2835_mmc_dumpregs(host);
++ return;
++ }
++ timeout--;
++ mdelay(1);
++ }
++
++ if (20-timeout > 10 && 20-timeout > host->max_delay) {
++ host->max_delay = 20-timeout;
++ pr_warning("Warning: MMC controller hung for %d ms\n", host->max_delay);
++ }
++
++ clk |= SDHCI_CLOCK_CARD_EN;
++ bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL);
++}
++
++static void bcm2835_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct bcm2835_host *host;
++ unsigned long flags;
++
++ host = mmc_priv(mmc);
++
++ spin_lock_irqsave(&host->lock, flags);
++
++ WARN_ON(host->mrq != NULL);
++
++ host->mrq = mrq;
++
++ if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
++ bcm2835_mmc_send_command(host, mrq->sbc);
++ else
++ bcm2835_mmc_send_command(host, mrq->cmd);
++
++ mmiowb();
++ spin_unlock_irqrestore(&host->lock, flags);
++
++ if (!(mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) && mrq->cmd->data && host->use_dma) {
++ /* DMA transfer starts now, PIO starts after interrupt */
++ bcm2835_mmc_transfer_dma(host);
++ }
++}
++
++
++static void bcm2835_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++
++ struct bcm2835_host *host = mmc_priv(mmc);
++ unsigned long flags;
++ u8 ctrl;
++ u16 clk, ctrl_2;
++
++ pr_debug("bcm2835_mmc_set_ios: clock %d, pwr %d, bus_width %d, timing %d, vdd %d, drv_type %d\n",
++ ios->clock, ios->power_mode, ios->bus_width,
++ ios->timing, ios->signal_voltage, ios->drv_type);
++
++ spin_lock_irqsave(&host->lock, flags);
++
++ if (!ios->clock || ios->clock != host->clock) {
++ bcm2835_mmc_set_clock(host, ios->clock);
++ host->clock = ios->clock;
++ }
++
++ if (host->pwr != SDHCI_POWER_330) {
++ host->pwr = SDHCI_POWER_330;
++ bcm2835_mmc_writeb(host, SDHCI_POWER_330 | SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
++ }
++
++ ctrl = bcm2835_mmc_readb(host, SDHCI_HOST_CONTROL);
++
++ /* set bus width */
++ ctrl &= ~SDHCI_CTRL_8BITBUS;
++ if (ios->bus_width == MMC_BUS_WIDTH_4)
++ ctrl |= SDHCI_CTRL_4BITBUS;
++ else
++ ctrl &= ~SDHCI_CTRL_4BITBUS;
++
++ ctrl &= ~SDHCI_CTRL_HISPD; /* NO_HISPD_BIT */
++
++
++ bcm2835_mmc_writeb(host, ctrl, SDHCI_HOST_CONTROL);
++ /*
++ * We only need to set Driver Strength if the
++ * preset value enable is not set.
++ */
++ ctrl_2 = bcm2835_mmc_readw(host, SDHCI_HOST_CONTROL2);
++ ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK;
++ if (ios->drv_type == MMC_SET_DRIVER_TYPE_A)
++ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A;
++ else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C)
++ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C;
++
++ bcm2835_mmc_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
++
++ /* Reset SD Clock Enable */
++ clk = bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL);
++ clk &= ~SDHCI_CLOCK_CARD_EN;
++ bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL);
++
++ /* Re-enable SD Clock */
++ bcm2835_mmc_set_clock(host, host->clock);
++ bcm2835_mmc_writeb(host, ctrl, SDHCI_HOST_CONTROL);
++
++ mmiowb();
++
++ spin_unlock_irqrestore(&host->lock, flags);
++}
++
++
++static struct mmc_host_ops bcm2835_ops = {
++ .request = bcm2835_mmc_request,
++ .set_ios = bcm2835_mmc_set_ios,
++ .enable_sdio_irq = bcm2835_mmc_enable_sdio_irq,
++};
++
++
++static void bcm2835_mmc_tasklet_finish(unsigned long param)
++{
++ struct bcm2835_host *host;
++ unsigned long flags;
++ struct mmc_request *mrq;
++
++ host = (struct bcm2835_host *)param;
++
++ spin_lock_irqsave(&host->lock, flags);
++
++ /*
++ * If this tasklet gets rescheduled while running, it will
++ * be run again afterwards but without any active request.
++ */
++ if (!host->mrq) {
++ spin_unlock_irqrestore(&host->lock, flags);
++ return;
++ }
++
++ del_timer(&host->timer);
++
++ mrq = host->mrq;
++
++ /*
++ * The controller needs a reset of internal state machines
++ * upon error conditions.
++ */
++ if (!(host->flags & SDHCI_DEVICE_DEAD) &&
++ ((mrq->cmd && mrq->cmd->error) ||
++ (mrq->data && (mrq->data->error ||
++ (mrq->data->stop && mrq->data->stop->error))))) {
++
++ spin_unlock_irqrestore(&host->lock, flags);
++ bcm2835_mmc_reset(host, SDHCI_RESET_CMD);
++ bcm2835_mmc_reset(host, SDHCI_RESET_DATA);
++ spin_lock_irqsave(&host->lock, flags);
++ }
++
++ host->mrq = NULL;
++ host->cmd = NULL;
++ host->data = NULL;
++
++ mmiowb();
++
++ spin_unlock_irqrestore(&host->lock, flags);
++ mmc_request_done(host->mmc, mrq);
++}
++
++
++
++static int bcm2835_mmc_add_host(struct bcm2835_host *host)
++{
++ struct mmc_host *mmc = host->mmc;
++ struct device *dev = mmc->parent;
++#ifndef FORCE_PIO
++ struct dma_slave_config cfg;
++#endif
++ int ret;
++
++ bcm2835_mmc_reset(host, SDHCI_RESET_ALL);
++
++ host->clk_mul = 0;
++
++ mmc->f_max = host->max_clk;
++ mmc->f_max = host->max_clk;
++ mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
++
++ /* SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK */
++ host->timeout_clk = mmc->f_max / 1000;
++ mmc->max_busy_timeout = (1 << 27) / host->timeout_clk;
++
++ /* host controller capabilities */
++ mmc->caps |= MMC_CAP_CMD23 | MMC_CAP_ERASE | MMC_CAP_NEEDS_POLL |
++ MMC_CAP_SDIO_IRQ | MMC_CAP_SD_HIGHSPEED |
++ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_4_BIT_DATA;
++
++ mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
++
++ host->flags = SDHCI_AUTO_CMD23;
++
++ dev_info(dev, "mmc_debug:%x mmc_debug2:%x\n", mmc_debug, mmc_debug2);
++#ifdef FORCE_PIO
++ dev_info(dev, "Forcing PIO mode\n");
++ host->have_dma = false;
++#else
++ if (IS_ERR_OR_NULL(host->dma_chan_tx) ||
++ IS_ERR_OR_NULL(host->dma_chan_rx)) {
++ dev_err(dev, "%s: Unable to initialise DMA channels. Falling back to PIO\n",
++ DRIVER_NAME);
++ host->have_dma = false;
++ } else {
++ dev_info(dev, "DMA channels allocated");
++ host->have_dma = true;
++
++ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ cfg.slave_id = 11; /* DREQ channel */
++
++ cfg.direction = DMA_MEM_TO_DEV;
++ cfg.src_addr = 0;
++ cfg.dst_addr = host->bus_addr + SDHCI_BUFFER;
++ ret = dmaengine_slave_config(host->dma_chan_tx, &cfg);
++
++ cfg.direction = DMA_DEV_TO_MEM;
++ cfg.src_addr = host->bus_addr + SDHCI_BUFFER;
++ cfg.dst_addr = 0;
++ ret = dmaengine_slave_config(host->dma_chan_rx, &cfg);
++ }
++#endif
++ mmc->max_segs = 128;
++ mmc->max_req_size = 524288;
++ mmc->max_seg_size = mmc->max_req_size;
++ mmc->max_blk_size = 512;
++ mmc->max_blk_count = 65535;
++
++ /* report supported voltage ranges */
++ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
++
++ tasklet_init(&host->finish_tasklet,
++ bcm2835_mmc_tasklet_finish, (unsigned long)host);
++
++ setup_timer(&host->timer, bcm2835_mmc_timeout_timer, (unsigned long)host);
++ init_waitqueue_head(&host->buf_ready_int);
++
++ bcm2835_mmc_init(host, 0);
++ ret = devm_request_threaded_irq(dev, host->irq, bcm2835_mmc_irq,
++ bcm2835_mmc_thread_irq, IRQF_SHARED,
++ mmc_hostname(mmc), host);
++ if (ret) {
++ dev_err(dev, "Failed to request IRQ %d: %d\n", host->irq, ret);
++ goto untasklet;
++ }
++
++ mmiowb();
++ mmc_add_host(mmc);
++
++ return 0;
++
++untasklet:
++ tasklet_kill(&host->finish_tasklet);
++
++ return ret;
++}
++
++static int bcm2835_mmc_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct device_node *node = dev->of_node;
++ struct clk *clk;
++ struct resource *iomem;
++ struct bcm2835_host *host;
++ struct mmc_host *mmc;
++ const __be32 *addr;
++ int ret;
++
++ mmc = mmc_alloc_host(sizeof(*host), dev);
++ if (!mmc)
++ return -ENOMEM;
++
++ mmc->ops = &bcm2835_ops;
++ host = mmc_priv(mmc);
++ host->mmc = mmc;
++ host->timeout = msecs_to_jiffies(1000);
++ spin_lock_init(&host->lock);
++
++ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ host->ioaddr = devm_ioremap_resource(dev, iomem);
++ if (IS_ERR(host->ioaddr)) {
++ ret = PTR_ERR(host->ioaddr);
++ goto err;
++ }
++
++ addr = of_get_address(node, 0, NULL, NULL);
++ if (!addr) {
++ dev_err(dev, "could not get DMA-register address\n");
++ return -ENODEV;
++ }
++ host->bus_addr = be32_to_cpup(addr);
++ pr_debug(" - ioaddr %lx, iomem->start %lx, bus_addr %lx\n",
++ (unsigned long)host->ioaddr,
++ (unsigned long)iomem->start,
++ (unsigned long)host->bus_addr);
++
++#ifndef FORCE_PIO
++ if (node) {
++ host->dma_chan_tx = dma_request_slave_channel(dev, "tx");
++ host->dma_chan_rx = dma_request_slave_channel(dev, "rx");
++ } else {
++ dma_cap_mask_t mask;
++
++ dma_cap_zero(mask);
++ /* we don't care about the channel, any would work */
++ dma_cap_set(DMA_SLAVE, mask);
++ host->dma_chan_tx = dma_request_channel(mask, NULL, NULL);
++ host->dma_chan_rx = dma_request_channel(mask, NULL, NULL);
++ }
++#endif
++ clk = devm_clk_get(dev, NULL);
++ if (IS_ERR(clk)) {
++ dev_err(dev, "could not get clk\n");
++ ret = PTR_ERR(clk);
++ goto err;
++ }
++
++ host->max_clk = clk_get_rate(clk);
++
++ host->irq = platform_get_irq(pdev, 0);
++ if (host->irq <= 0) {
++ dev_err(dev, "get IRQ failed\n");
++ ret = -EINVAL;
++ goto err;
++ }
++
++ if (node) {
++ mmc_of_parse(mmc);
++
++ /* Read any custom properties */
++ of_property_read_u32(node,
++ "brcm,overclock-50",
++ &host->overclock_50);
++ } else {
++ mmc->caps |= MMC_CAP_4_BIT_DATA;
++ }
++
++ ret = bcm2835_mmc_add_host(host);
++ if (ret)
++ goto err;
++
++ platform_set_drvdata(pdev, host);
++
++ return 0;
++err:
++ mmc_free_host(mmc);
++
++ return ret;
++}
++
++static int bcm2835_mmc_remove(struct platform_device *pdev)
++{
++ struct bcm2835_host *host = platform_get_drvdata(pdev);
++ unsigned long flags;
++ int dead;
++ u32 scratch;
++
++ dead = 0;
++ scratch = bcm2835_mmc_readl(host, SDHCI_INT_STATUS);
++ if (scratch == (u32)-1)
++ dead = 1;
++
++
++ if (dead) {
++ spin_lock_irqsave(&host->lock, flags);
++
++ host->flags |= SDHCI_DEVICE_DEAD;
++
++ if (host->mrq) {
++ pr_err("%s: Controller removed during "
++ " transfer!\n", mmc_hostname(host->mmc));
++
++ host->mrq->cmd->error = -ENOMEDIUM;
++ tasklet_schedule(&host->finish_tasklet);
++ }
++
++ spin_unlock_irqrestore(&host->lock, flags);
++ }
++
++ mmc_remove_host(host->mmc);
++
++ if (!dead)
++ bcm2835_mmc_reset(host, SDHCI_RESET_ALL);
++
++ free_irq(host->irq, host);
++
++ del_timer_sync(&host->timer);
++
++ tasklet_kill(&host->finish_tasklet);
++
++ mmc_free_host(host->mmc);
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++
++static const struct of_device_id bcm2835_mmc_match[] = {
++ { .compatible = "brcm,bcm2835-mmc" },
++ { }
++};
++MODULE_DEVICE_TABLE(of, bcm2835_mmc_match);
++
++
++
++static struct platform_driver bcm2835_mmc_driver = {
++ .probe = bcm2835_mmc_probe,
++ .remove = bcm2835_mmc_remove,
++ .driver = {
++ .name = DRIVER_NAME,
++ .owner = THIS_MODULE,
++ .of_match_table = bcm2835_mmc_match,
++ },
++};
++module_platform_driver(bcm2835_mmc_driver);
++
++module_param(mmc_debug, uint, 0644);
++module_param(mmc_debug2, uint, 0644);
++MODULE_ALIAS("platform:mmc-bcm2835");
++MODULE_DESCRIPTION("BCM2835 SDHCI driver");
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Gellert Weisz");