1 files changed, 0 insertions, 91 deletions
diff --git a/target/linux/brcm2708/patches-3.18/0097-bcm2709-Port-pps-gpio-and-i2c-patches.patch b/target/linux/brcm2708/patches-3.18/0097-bcm2709-Port-pps-gpio-and-i2c-patches.patch
deleted file mode 100644
index ff3973de0f..0000000000
--- a/target/linux/brcm2708/patches-3.18/0097-bcm2709-Port-pps-gpio-and-i2c-patches.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From aca6741a1d26736f6000d18b3c60a18a313be6ea Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Mon, 26 Jan 2015 17:40:22 +0000
-Subject: [PATCH 097/114] bcm2709: Port pps-gpio and i2c patches
-
----
- arch/arm/mach-bcm2709/bcm2709.c | 41 +++++++++++++++++++++++++++++++++++++++--
- 1 file changed, 39 insertions(+), 2 deletions(-)
-
---- a/arch/arm/mach-bcm2709/bcm2709.c
-+++ b/arch/arm/mach-bcm2709/bcm2709.c
-@@ -37,6 +37,7 @@
- #include <linux/spi/spi.h>
- #include <linux/gpio/machine.h>
- #include <linux/w1-gpio.h>
-+#include <linux/pps-gpio.h>
- 
- #include <linux/version.h>
- #include <linux/clkdev.h>
-@@ -95,6 +96,8 @@ static unsigned disk_led_active_low = 1;
- static unsigned reboot_part = 0;
- static unsigned w1_gpio_pin = W1_GPIO;
- static unsigned w1_gpio_pullup = W1_PULLUP;
-+static int pps_gpio_pin = -1;
-+static bool vc_i2c_override = false;
- 
- static unsigned use_dt = 0;
- 
-@@ -283,6 +286,19 @@ static struct platform_device w1_device
- };
- #endif
- 
-+static struct pps_gpio_platform_data pps_gpio_info = {
-+	.assert_falling_edge = false,
-+	.capture_clear = false,
-+	.gpio_pin = -1,
-+	.gpio_label = "PPS",
-+};
-+
-+static struct platform_device pps_gpio_device = {
-+	.name = "pps-gpio",
-+	.id = PLATFORM_DEVID_NONE,
-+	.dev.platform_data = &pps_gpio_info,
-+};
-+
- static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
- 
- static struct platform_device bcm2708_fb_device = {
-@@ -860,6 +876,16 @@ void __init bcm2709_init(void)
- #ifdef CONFIG_BCM2708_GPIO
- 	bcm_register_device_dt(&bcm2708_gpio_device);
- #endif
-+
-+#if defined(CONFIG_PPS_CLIENT_GPIO) || defined(CONFIG_PPS_CLIENT_GPIO_MODULE)
-+	if (!use_dt && (pps_gpio_pin >= 0)) {
-+		pr_info("bcm2709: GPIO %d setup as pps-gpio device\n", pps_gpio_pin);
-+		pps_gpio_info.gpio_pin = pps_gpio_pin;
-+		pps_gpio_device.id = pps_gpio_pin;
-+		bcm_register_device(&pps_gpio_device);
-+	}
-+#endif
-+
- #if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
- 	w1_gpio_pdata.pin = w1_gpio_pin;
- 	w1_gpio_pdata.ext_pullup_enable_pin = w1_gpio_pullup;
-@@ -884,8 +910,15 @@ void __init bcm2709_init(void)
- 	bcm_register_device(&bcm2835_thermal_device);
- 
- 	bcm_register_device_dt(&bcm2708_spi_device);
--	bcm_register_device_dt(&bcm2708_bsc0_device);
--	bcm_register_device_dt(&bcm2708_bsc1_device);
-+
-+	if (vc_i2c_override) {
-+		bcm_register_device_dt(&bcm2708_bsc0_device);
-+		bcm_register_device_dt(&bcm2708_bsc1_device);
-+	} else if ((boardrev & 0xffffff) == 0x2 || (boardrev & 0xffffff) == 0x3) {
-+		bcm_register_device_dt(&bcm2708_bsc0_device);
-+	} else {
-+		bcm_register_device_dt(&bcm2708_bsc1_device);
-+	}
- 
- #if defined(CONFIG_SND_BCM2708_SOC_I2S) || defined(CONFIG_SND_BCM2708_SOC_I2S_MODULE)
- 	bcm_register_device_dt(&bcm2708_i2s_device);
-@@ -1245,3 +1278,7 @@ module_param(disk_led_active_low, uint,
- module_param(reboot_part, uint, 0644);
- module_param(w1_gpio_pin, uint, 0644);
- module_param(w1_gpio_pullup, uint, 0644);
-+module_param(pps_gpio_pin, int, 0644);
-+MODULE_PARM_DESC(pps_gpio_pin, "Set GPIO pin to reserve for PPS");
-+module_param(vc_i2c_override, bool, 0644);
-+MODULE_PARM_DESC(vc_i2c_override, "Allow the use of VC's I2C peripheral.");