aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm53xx/patches-3.14
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm53xx/patches-3.14')
-rw-r--r--target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch457
1 files changed, 145 insertions, 312 deletions
diff --git a/target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch b/target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
index 1b6149f20f..dcdbb8f967 100644
--- a/target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
+++ b/target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
@@ -1,19 +1,43 @@
-From cc2cda651fcbc498bf513a6b802dca19944bcb37 Mon Sep 17 00:00:00 2001
+From cf067bf8bb993d6cfdc42d750ae241c43f88403f Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Mon, 12 May 2014 11:55:20 +0200
-Subject: [PATCH 13/17] pcie2-bcma: add new PCIe2 driver for bcma
+Subject: [PATCH 1/2] PCI: BCM5301X: add PCIe2 driver for BCM5301X SoCs
This driver supports the PCIe controller found on the BCM4708 and
similar SoCs. The controller itself is automatically detected by bcma.
+This controller is found on SoCs usually used in SOHO routers to
+connect the wifi cards to the SoC. All the of the BCM5301X SoCs I know
+of have 2 or 3 of these controllers in the SoC.
+
+I had to use PCI domains otherwise the pci_create_root_bus() function
+in drivers/pci/probe.c would fail for the second controller being
+registered because pci_find_bus() would find the same PCIe bus again
+and assume it is already registered, which ends up in a kernel panic in
+pcibios_init_hw() in arch/arm/kernel/bios32.c
+
+The ARM PCI code assumes that every controller has an I/O space and
+adds a dummy area if the driver does not specify one. This will work
+for the first controller, but when we register the second one this will
+result in an error. To prevent this problem we add an empty I/O space.
+
+Currently I have problems with probing the devices on the bus, because
+pci_bus_add_devices() is called too early in pci_scan_root_bus() in
+drivers/pci/probe.c, before pci_bus_assign_resources() was called in
+pci_common_init_dev() in arch/arm/kernel/bios32.c. When the devices are
+added too early they do not have any resources and adding fails. I have
+to remove the call to pci_bus_add_devices() in pci_scan_root_bus() to
+make registration work, calling pci_bus_add_devices() later again does
+not fix this problem.
+
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
- arch/arm/mach-bcm/Kconfig | 2 +
- drivers/pci/host/Kconfig | 7 +
- drivers/pci/host/Makefile | 1 +
- drivers/pci/host/pcie2-bcma.c | 591 ++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 601 insertions(+)
- create mode 100644 drivers/pci/host/pcie2-bcma.c
+ arch/arm/mach-bcm/Kconfig | 1 +
+ drivers/pci/host/Kconfig | 7 +
+ drivers/pci/host/Makefile | 1 +
+ drivers/pci/host/pci-host-bcm5301x.c | 428 +++++++++++++++++++++++++++++++++++
+ 4 files changed, 437 insertions(+)
+ create mode 100644 drivers/pci/host/pci-host-bcm5301x.c
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -31,12 +55,12 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
There are 3 internal PCI controllers available with a single
built-in EHCI/OHCI host controller present on each one.
-+config PCI_BCMA
-+ bool "BCMA PCIe2 host controller"
-+ depends on BCMA && OF
++config PCI_BCM5301X
++ bool "BCM5301X PCIe2 host controller"
++ depends on BCMA && OF && ARM && PCI_DOMAINS
+ help
-+ Say Y here if you want to support a simple generic PCI host
-+ controller, such as the one emulated by kvmtool.
++ Say Y here if you want to support the PCIe host controller found
++ on Broadcom BCM5301X and BCM470X (Northstar) SoCs.
+
endmenu
--- a/drivers/pci/host/Makefile
@@ -45,10 +69,10 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
-+obj-$(CONFIG_PCI_BCMA) += pcie2-bcma.o
++obj-$(CONFIG_PCI_BCM5301X) += pci-host-bcm5301x.o
--- /dev/null
-+++ b/drivers/pci/host/pcie2-bcma.c
-@@ -0,0 +1,619 @@
++++ b/drivers/pci/host/pci-host-bcm5301x.c
+@@ -0,0 +1,428 @@
+/*
+ * Northstar PCI-Express driver
+ * Only supports Root-Complex (RC) mode
@@ -58,63 +82,25 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Only MEM access is supported, PAX does not support IO.
+ *
-+ * TODO:
-+ * MSI interrupts,
-+ * DRAM > 128 MBytes (e.g. DMA zones)
++ * Copyright 2012-2014, Broadcom Corporation
++ * Copyright 2014, Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
-+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/bcma/bcma.h>
-+
-+#define SI_ENUM_BASE 0x18000000 /* Enumeration space base */
-+
-+/*
-+ * Register offset definitions
-+ */
-+#define SOC_PCIE_CONTROL 0x000 /* a.k.a. CLK_CONTROL reg */
-+#define SOC_PCIE_PM_STATUS 0x008
-+#define SOC_PCIE_PM_CONTROL 0x00c /* in EP mode only ! */
-+
-+#define SOC_PCIE_EXT_CFG_ADDR 0x120
-+#define SOC_PCIE_EXT_CFG_DATA 0x124
-+#define SOC_PCIE_CFG_ADDR 0x1f8
-+#define SOC_PCIE_CFG_DATA 0x1fc
-+
-+#define SOC_PCIE_SYS_RC_INTX_EN 0x330
-+#define SOC_PCIE_SYS_RC_INTX_CSR 0x334
-+#define SOC_PCIE_SYS_HOST_INTR_EN 0x344
-+#define SOC_PCIE_SYS_HOST_INTR_CSR 0x348
++#include <linux/bcma/bcma_driver_pcie2.h>
++#include <linux/of_irq.h>
+
+#define SOC_PCIE_HDR_OFF 0x400 /* 256 bytes per function */
+
-+/* 32-bit 4KB in-bound mapping windows for Function 0..3, n=0..7 */
-+#define SOC_PCIE_SYS_IMAP0(f, n) (0xc00 + ((f) << 9)((n) << 2))
-+/* 64-bit in-bound mapping windows for func 0..3 */
-+#define SOC_PCIE_SYS_IMAP1(f) (0xc80 + ((f) << 3))
-+#define SOC_PCIE_SYS_IMAP2(f) (0xcc0 + ((f) << 3))
-+/* 64-bit in-bound address range n=0..2 */
-+#define SOC_PCIE_SYS_IARR(n) (0xd00 + ((n) << 3))
-+/* 64-bit out-bound address filter n=0..2 */
-+#define SOC_PCIE_SYS_OARR(n) (0xd20 + ((n) << 3))
-+/* 64-bit out-bound mapping windows n=0..2 */
-+#define SOC_PCIE_SYS_OMAP(n) (0xd40 + ((n) << 3))
-+
-+#define BCM4360_D11AC_ID 0x43a0
-+#define BCM4360_D11AC2G_ID 0x43a1
-+#define BCM4360_D11AC5G_ID 0x43a2
-+#define BCM4352_D11AC_ID 0x43b1 /* 4352 802.11ac dualband device */
-+#define BCM4352_D11AC2G_ID 0x43b2 /* 4352 802.11ac 2.4G device */
-+#define BCM4352_D11AC5G_ID 0x43b3 /* 4352 802.11ac 5G device */
-+
-+static struct pci_ops bcma_pcie2_ops;
-+
+static int bcma_pcie2_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ struct pci_sys_data *sys = pdev->sysdata;
@@ -133,16 +119,17 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ if (busno == 0) {
+ if (slot >= 1)
+ return 0;
-+ bcma_write32(bdev, SOC_PCIE_EXT_CFG_ADDR, where & 0xffc);
-+ return SOC_PCIE_EXT_CFG_DATA;
++ bcma_write32(bdev, BCMA_CORE_PCIE2_CONFIGINDADDR,
++ where & 0xffc);
++ return BCMA_CORE_PCIE2_CONFIGINDDATA;
+ }
+ if (fn > 1)
+ return 0;
+ addr_reg = (busno & 0xff) << 20 | (slot << 15) | (fn << 12) |
+ (where & 0xffc) | (1 & 0x3);
+
-+ bcma_write32(bdev, SOC_PCIE_CFG_ADDR, addr_reg);
-+ return SOC_PCIE_CFG_DATA;
++ bcma_write32(bdev, BCMA_CORE_PCIE2_CFG_ADDR, addr_reg);
++ return BCMA_CORE_PCIE2_CFG_DATA;
+}
+
+static u32 bcma_pcie2_read_config(struct bcma_device *bdev, int busno,
@@ -160,20 +147,6 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+
+ data_reg = bcma_read32(bdev, base);
+
-+ /* NS: CLASS field is R/O, and set to wrong 0x200 value */
-+ if (busno == 0 && devfn == 0) {
-+ /*
-+ * RC's class is 0x0280, but Linux PCI driver needs 0x604
-+ * for a PCIe bridge. So we must fixup the class code
-+ * to 0x604 here.
-+ */
-+ if ((where & 0xffc) == PCI_CLASS_REVISION) {
-+ data_reg &= 0xff;
-+ data_reg |= 0x604 << 16;
-+ }
-+ }
-+ /* HEADER_TYPE=00 indicates the port in EP mode */
-+
+ if (size == 4)
+ return data_reg;
+
@@ -208,42 +181,6 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ bcma_write32(bdev, base, data_reg);
+}
+
-+static u8 bcma_pcie2_read_config8(struct bcma_device *bdev, int busno,
-+ unsigned int devfn, int where)
-+{
-+ return bcma_pcie2_read_config(bdev, busno, devfn, where, 1);
-+}
-+
-+static u16 bcma_pcie2_read_config16(struct bcma_device *bdev, int busno,
-+ unsigned int devfn, int where)
-+{
-+ return bcma_pcie2_read_config(bdev, busno, devfn, where, 2);
-+}
-+
-+static u32 bcma_pcie2_read_config32(struct bcma_device *bdev, int busno,
-+ unsigned int devfn, int where)
-+{
-+ return bcma_pcie2_read_config(bdev, busno, devfn, where, 4);
-+}
-+
-+static void bcma_pcie2_write_config8(struct bcma_device *bdev, int busno,
-+ unsigned int devfn, int where, u8 val)
-+{
-+ return bcma_pcie2_write_config(bdev, busno, devfn, where, 1, val);
-+}
-+
-+static void bcma_pcie2_write_config16(struct bcma_device *bdev, int busno,
-+ unsigned int devfn, int where, u16 val)
-+{
-+ return bcma_pcie2_write_config(bdev, busno, devfn, where, 2, val);
-+}
-+
-+static void bcma_pcie2_write_config32(struct bcma_device *bdev, int busno,
-+ unsigned int devfn, int where, u32 val)
-+{
-+ return bcma_pcie2_write_config(bdev, busno, devfn, where, 4, val);
-+}
-+
+static int bcma_pcie2_read_config_pci(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
@@ -267,31 +204,31 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+}
+
+/*
++ * Methods for accessing configuration registers
++ */
++static struct pci_ops bcma_pcie2_ops = {
++ .read = bcma_pcie2_read_config_pci,
++ .write = bcma_pcie2_write_config_pci,
++};
++
++/* NS: CLASS field is R/O, and set to wrong 0x200 value */
++static void bcma_pcie2_fixup_class(struct pci_dev *dev)
++{
++ dev->class = PCI_CLASS_BRIDGE_PCI << 8;
++}
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x8011, bcma_pcie2_fixup_class);
++
++/*
+ * Check link status, return 0 if link is up in RC mode,
+ * otherwise return non-zero
+ */
-+static int bcma_pcie2_check_link(struct bcma_device *bdev,
-+ struct pci_sys_data *sys, u32 allow_gen2)
++static int bcma_pcie2_check_link(struct bcma_device *bdev, bool allow_gen2)
+{
+ u32 devfn = 0;
+ u32 tmp32;
-+ u16 tmp16;
+ u8 tmp8;
-+ int pos;
-+ bool link = false;
-+ /*
-+ * Setup callback (bcma_pcie2_setup) is called in pcibios_init_hw before
-+ * creating bus root, so we don't have it here yet. On the other hand
-+ * we really want to use pci_bus_find_capability helper to check NLW.
-+ * Let's fake simple pci_bus just to query for capabilities.
-+ */
-+ struct pci_bus bus = {
-+ .number = 0,
-+ .ops = &bcma_pcie2_ops,
-+ .sysdata = sys,
-+ };
+
-+ tmp32 = bcma_pcie2_read_config32(bdev, 0, devfn, 0xdc);
++ tmp32 = bcma_pcie2_read_config(bdev, 0, devfn, 0xdc, 4);
+ tmp32 &= ~0xf;
+ if (allow_gen2)
+ tmp32 |= 2;
@@ -299,28 +236,17 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ /* force PCIE GEN1 */
+ tmp32 |= 1;
+ }
-+ bcma_pcie2_write_config32(bdev, 0, devfn, 0xdc, tmp32);
++ bcma_pcie2_write_config(bdev, 0, devfn, 0xdc, 4, tmp32);
+
+ /* See if the port is in EP mode, indicated by header type 00 */
-+ tmp8 = bcma_pcie2_read_config8(bdev, 0, devfn, PCI_HEADER_TYPE);
++ tmp8 = bcma_pcie2_read_config(bdev, 0, devfn, PCI_HEADER_TYPE, 1);
+ if (tmp8 != PCI_HEADER_TYPE_BRIDGE) {
+ dev_info(&bdev->dev, "Port %d in End-Point mode - ignored\n",
+ bdev->core_unit);
+ return -ENODEV;
+ }
+
-+ /* NS PAX only changes NLW field when card is present */
-+ pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP);
-+ if (pos) {
-+ u8 nlw;
-+
-+ pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_LNKSTA,
-+ &tmp16);
-+ nlw = (tmp16 & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT;
-+ link = (tmp16 & PCI_EXP_LNKSTA_DLLLA) || nlw != 0;
-+ }
-+
-+ return link ? 0 : -ENODEV;
++ return 0;
+}
+
+/*
@@ -328,67 +254,52 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ */
+static void bcma_pcie2_hw_init(struct bcma_device *bdev)
+{
-+ u32 devfn = 0;
+ u32 tmp32;
+ u16 tmp16;
+
+ /* Change MPS and MRRS to 512 */
-+ tmp16 = bcma_pcie2_read_config16(bdev, 0, devfn, 0x4d4);
++ tmp16 = bcma_pcie2_read_config(bdev, 0, 0, 0x4d4, 2);
+ tmp16 &= ~7;
+ tmp16 |= 2;
-+ bcma_pcie2_write_config16(bdev, 0, devfn, 0x4d4, tmp16);
++ bcma_pcie2_write_config(bdev, 0, 0, 0x4d4, 2, tmp16);
+
-+ tmp32 = bcma_pcie2_read_config32(bdev, 0, devfn, 0xb4);
++ tmp32 = bcma_pcie2_read_config(bdev, 0, 0, 0xb4, 4);
+ tmp32 &= ~((7 << 12) | (7 << 5));
+ tmp32 |= (2 << 12) | (2 << 5);
-+ bcma_pcie2_write_config32(bdev, 0, devfn, 0xb4, tmp32);
-+
-+ /* Turn-on Root-Complex (RC) mode, from reset defailt of EP */
++ bcma_pcie2_write_config(bdev, 0, 0, 0xb4, 4, tmp32);
+
-+ /* The mode is set by straps, can be overwritten via DMU
-+ register <cru_straps_control> bit 5, "1" means RC
++ /*
++ * Turn-on Root-Complex (RC) mode, from reset default of EP
++ * The mode is set by straps, can be overwritten via DMU
++ * register <cru_straps_control> bit 5, "1" means RC
+ */
+
+ /* Send a downstream reset */
-+ bcma_write32(bdev, SOC_PCIE_CONTROL, 0x3);
-+ udelay(250);
-+ bcma_write32(bdev, SOC_PCIE_CONTROL, 0x1);
-+ mdelay(250);
++ bcma_write32(bdev, BCMA_CORE_PCIE2_CLK_CONTROL,
++ PCIE2_CLKC_RST_OE | PCIE2_CLKC_RST);
++ usleep_range(250, 400);
++ bcma_write32(bdev, BCMA_CORE_PCIE2_CLK_CONTROL, PCIE2_CLKC_RST_OE);
++ msleep(250);
+
+ /* TBD: take care of PM, check we're on */
+}
+
+/*
+ * Setup the address translation
++ *
++ * NOTE: All PCI-to-CPU address mapping are 1:1 for simplicity
+ */
-+static void bcma_pcie2_map_init(struct bcma_device *bdev)
++static int bcma_pcie2_map_init(struct bcma_device *bdev, u32 addr)
+{
-+ unsigned size, i;
-+ u32 addr;
++ /* 64MB alignment */
++ if (!addr || (addr & (SZ_64M - 1)))
++ return -EINVAL;
+
-+ /*
-+ * NOTE:
-+ * All PCI-to-CPU address mapping are 1:1 for simplicity
-+ */
++ bcma_write32(bdev, BCMA_CORE_PCIE2_OMAP0_LOWER, addr);
++ bcma_write32(bdev, BCMA_CORE_PCIE2_OARR0, addr | 0x01);
+
-+ /* Outbound address translation setup */
-+ size = SZ_128M;
-+ addr = bdev->addr_s[0];
-+ BUG_ON(!addr);
-+ BUG_ON(addr & ((1 << 25) - 1)); /* 64MB alignment */
-+
-+ for (i = 0; i < 3; i++) {
-+ const unsigned win_size = SZ_64M;
-+ /* 64-bit LE regs, write low word, high is 0 at reset */
-+ bcma_write32(bdev, SOC_PCIE_SYS_OMAP(i), addr);
-+ bcma_write32(bdev, SOC_PCIE_SYS_OARR(i), addr|0x1);
-+ addr += win_size;
-+ if (size >= win_size)
-+ size -= win_size;
-+ if (size == 0)
-+ break;
-+ }
-+ WARN_ON(size > 0);
++ bcma_write32(bdev, BCMA_CORE_PCIE2_OMAP1_LOWER, addr + SZ_64M);
++ bcma_write32(bdev, BCMA_CORE_PCIE2_OARR1, (addr + SZ_64M) | 0x01);
+
+ /*
+ * Inbound address translation setup
@@ -398,107 +309,46 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ * otherwise DMA bouncing mechanism may be required.
+ * Also consider DMA mask to limit DMA physical address
+ */
-+ size = SZ_128M;
-+ addr = PHYS_OFFSET;
-+
-+ size >>= 20; /* In MB */
-+ size &= 0xff; /* Size is an 8-bit field */
-+
-+ WARN_ON(size == 0);
+ /* 64-bit LE regs, write low word, high is 0 at reset */
-+ bcma_write32(bdev, SOC_PCIE_SYS_IMAP1(0), addr | 0x1);
-+ bcma_write32(bdev, SOC_PCIE_SYS_IARR(1), addr | size);
-+
-+#ifdef CONFIG_SPARSEMEM
-+ addr = PHYS_OFFSET2;
-+ bcma_write32(bdev, SOC_PCIE_SYS_IMAP2(0), addr | 0x1);
-+ bcma_write32(bdev, SOC_PCIE_SYS_IARR(2), addr | size);
-+#endif
++ bcma_write32(bdev, BCMA_CORE_PCIE2_FUNC0_IMAP1, PHYS_OFFSET | 0x1);
++ bcma_write32(bdev, BCMA_CORE_PCIE2_IARR1_LOWER,
++ PHYS_OFFSET | ((SZ_128M >> 20) & 0xff));
++ return 0;
+}
+
+/*
+ * Setup PCIE Host bridge
+ */
-+static void bcma_pcie2_bridge_init(struct bcma_device *bdev)
++static int bcma_pcie2_bridge_init(struct bcma_device *bdev, u32 addr, u32 size)
+{
-+ u32 devfn = 0;
-+ u8 tmp8;
-+ u16 tmp16;
++ bcma_pcie2_write_config(bdev, 0, 0, PCI_PRIMARY_BUS, 1, 0);
++ bcma_pcie2_write_config(bdev, 0, 0, PCI_SECONDARY_BUS, 1, 1);
++ bcma_pcie2_write_config(bdev, 0, 0, PCI_SUBORDINATE_BUS, 1, 4);
+
-+ bcma_pcie2_write_config8(bdev, 0, devfn, PCI_PRIMARY_BUS, 0);
-+ bcma_pcie2_write_config8(bdev, 0, devfn, PCI_SECONDARY_BUS, 1);
-+ bcma_pcie2_write_config8(bdev, 0, devfn, PCI_SUBORDINATE_BUS, 4);
-+
-+ tmp8 = bcma_pcie2_read_config8(bdev, 0, devfn, PCI_PRIMARY_BUS);
-+ tmp8 = bcma_pcie2_read_config8(bdev, 0, devfn, PCI_SECONDARY_BUS);
-+ tmp8 = bcma_pcie2_read_config8(bdev, 0, devfn, PCI_SUBORDINATE_BUS);
++ bcma_pcie2_read_config(bdev, 0, 0, PCI_PRIMARY_BUS, 1);
++ bcma_pcie2_read_config(bdev, 0, 0, PCI_SECONDARY_BUS, 1);
++ bcma_pcie2_read_config(bdev, 0, 0, PCI_SUBORDINATE_BUS, 1);
+
+ /* MEM_BASE, MEM_LIM require 1MB alignment */
-+ BUG_ON((bdev->addr_s[0] >> 16) & 0xf);
-+ bcma_pcie2_write_config16(bdev, 0, devfn, PCI_MEMORY_BASE,
-+ bdev->addr_s[0] >> 16);
-+ BUG_ON(((bdev->addr_s[0] + SZ_128M) >> 16) & 0xf);
-+ bcma_pcie2_write_config16(bdev, 0, devfn, PCI_MEMORY_LIMIT,
-+ (bdev->addr_s[0] + SZ_128M) >> 16);
++ if (((addr >> 16) & 0xf) || (((addr + size) >> 16) & 0xf))
++ return -EINVAL;
++
++ bcma_pcie2_write_config(bdev, 0, 0, PCI_MEMORY_BASE, 2, addr >> 16);
++ bcma_pcie2_write_config(bdev, 0, 0, PCI_MEMORY_LIMIT, 2,
++ (addr + size) >> 16);
+
+ /* These registers are not supported on the NS */
-+ bcma_pcie2_write_config16(bdev, 0, devfn, PCI_IO_BASE_UPPER16, 0);
-+ bcma_pcie2_write_config16(bdev, 0, devfn, PCI_IO_LIMIT_UPPER16, 0);
++ bcma_pcie2_write_config(bdev, 0, 0, PCI_IO_BASE_UPPER16, 2, 0);
++ bcma_pcie2_write_config(bdev, 0, 0, PCI_IO_LIMIT_UPPER16, 2, 0);
+
+ /* Force class to that of a Bridge */
-+ bcma_pcie2_write_config16(bdev, 0, devfn, PCI_CLASS_DEVICE,
-+ PCI_CLASS_BRIDGE_PCI);
-+
-+ tmp16 = bcma_pcie2_read_config16(bdev, 0, devfn, PCI_CLASS_DEVICE);
-+ tmp16 = bcma_pcie2_read_config16(bdev, 0, devfn, PCI_MEMORY_BASE);
-+ tmp16 = bcma_pcie2_read_config16(bdev, 0, devfn, PCI_MEMORY_LIMIT);
-+}
++ bcma_pcie2_write_config(bdev, 0, 0, PCI_CLASS_DEVICE, 2,
++ PCI_CLASS_BRIDGE_PCI);
+
-+static int bcma_pcie2_allow_gen2_rc(struct bcma_device *bdev)
-+{
-+ u32 vendorid, devid, chipid, chiprev;
-+ u32 val, bar;
-+ void __iomem *base;
-+ int allow = 1;
-+
-+ /* Read PCI vendor/device ID's */
-+ bcma_write32(bdev, SOC_PCIE_CFG_ADDR, 0x0);
-+ val = bcma_read32(bdev, SOC_PCIE_CFG_DATA);
-+ vendorid = val & 0xffff;
-+ devid = val >> 16;
-+ if (vendorid == PCI_VENDOR_ID_BROADCOM &&
-+ (devid == BCMA_CHIP_ID_BCM4360 || devid == BCM4360_D11AC_ID ||
-+ devid == BCM4360_D11AC2G_ID || devid == BCM4360_D11AC5G_ID ||
-+ devid == BCM4352_D11AC_ID || devid == BCM4352_D11AC2G_ID ||
-+ devid == BCM4352_D11AC5G_ID)) {
-+ /* Config BAR0 */
-+ bar = bdev->addr_s[0];
-+ bcma_write32(bdev, SOC_PCIE_CFG_ADDR, 0x10);
-+ bcma_write32(bdev, SOC_PCIE_CFG_DATA, bar);
-+ /* Config BAR0 window to access chipc */
-+ bcma_write32(bdev, SOC_PCIE_CFG_ADDR, 0x80);
-+ bcma_write32(bdev, SOC_PCIE_CFG_DATA, SI_ENUM_BASE);
-+
-+ /* Enable memory resource */
-+ bcma_write32(bdev, SOC_PCIE_CFG_ADDR, 0x4);
-+ val = bcma_read32(bdev, SOC_PCIE_CFG_DATA);
-+ val |= PCI_COMMAND_MEMORY;
-+ bcma_write32(bdev, SOC_PCIE_CFG_DATA, val);
-+ /* Enable memory and bus master */
-+ bcma_write32(bdev, SOC_PCIE_HDR_OFF + 4, 0x6);
-+
-+ /* Read CHIP ID */
-+ base = ioremap(bar, 0x1000);
-+ val = __raw_readl(base);
-+ iounmap(base);
-+ chipid = val & 0xffff;
-+ chiprev = (val >> 16) & 0xf;
-+ if ((chipid == BCMA_CHIP_ID_BCM4360 ||
-+ chipid == BCMA_CHIP_ID_BCM43460 ||
-+ chipid == BCMA_CHIP_ID_BCM4352) && (chiprev < 3))
-+ allow = 0;
-+ }
-+ return allow;
++ bcma_pcie2_read_config(bdev, 0, 0, PCI_CLASS_DEVICE, 2);
++ bcma_pcie2_read_config(bdev, 0, 0, PCI_MEMORY_BASE, 2);
++ bcma_pcie2_read_config(bdev, 0, 0, PCI_MEMORY_LIMIT, 2);
++ return 0;
+}
+
+static void bcma_pcie2_3rd_init(struct bcma_bus *bus)
@@ -537,7 +387,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ struct resource *res;
+ struct bcma_device *arm_core;
+ u32 cru_straps_ctrl;
-+ int allow_gen2, linkfail;
++ int ret;
+ int phyaddr;
+
+ if (bdev->core_unit == 2) {
@@ -561,8 +411,8 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ return -EINVAL;
+
+ res->start = bdev->addr_s[0];
-+ res->end = res->start + SZ_128M - 1;
-+ res->name = "PCIe Configuration Space";
++ res->end = bdev->addr_s[0] + SZ_128M -1;
++ res->name = "PCIe dummy IO space";
+ res->flags = IORESOURCE_MEM;
+
+ pci_add_resource(&sys->resources, res);
@@ -572,55 +422,36 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ if (!res)
+ return -EINVAL;
+
-+ res->start = bdev->addr_s[0];
-+ res->end = res->start + SZ_128M - 1;
-+ res->name = "PCIe Configuration Space";
++ res->start = 0;
++ res->end = 0;
++ res->name = "PCIe dummy IO space";
+ res->flags = IORESOURCE_IO;
+
+ pci_add_resource(&sys->resources, res);
+
-+ for (allow_gen2 = 0; allow_gen2 <= 1; allow_gen2++) {
-+ bcma_pcie2_hw_init(bdev);
-+ bcma_pcie2_map_init(bdev);
-+
-+ /*
-+ * Skip inactive ports -
-+ * will need to change this for hot-plugging
-+ */
-+ linkfail = bcma_pcie2_check_link(bdev, sys, allow_gen2);
-+ if (linkfail)
-+ break;
-+
-+ bcma_pcie2_bridge_init(bdev);
-+
-+ if (allow_gen2 == 0) {
-+ if (bcma_pcie2_allow_gen2_rc(bdev) == 0)
-+ break;
-+ dev_info(&bdev->dev, "switching to GEN2\n");
-+ }
-+ }
++ bcma_pcie2_hw_init(bdev);
++ ret = bcma_pcie2_map_init(bdev, bdev->addr_s[0]);
++ if (ret)
++ return ret;
++
++ /*
++ * Skip inactive ports -
++ * will need to change this for hot-plugging
++ */
++ ret = bcma_pcie2_check_link(bdev, true);
++ if (ret)
++ return ret;
+
-+ if (linkfail)
-+ return -1;
++ ret = bcma_pcie2_bridge_init(bdev, bdev->addr_s[0], SZ_128M);
++ if (ret)
++ return ret;
+
+ return 1;
+}
+
-+/*
-+ * Methods for accessing configuration registers
-+ */
-+static struct pci_ops bcma_pcie2_ops = {
-+ .read = bcma_pcie2_read_config_pci,
-+ .write = bcma_pcie2_write_config_pci,
-+};
-+
+static int bcma_pcie2_probe(struct bcma_device *bdev)
+{
-+ struct hw_pci hw;
-+
-+ dev_info(&bdev->dev, "scanning bus\n");
-+
-+ hw = (struct hw_pci) {
++ struct hw_pci hw = {
+ .nr_controllers = 1,
+ .domain = bdev->core_unit,
+ .private_data = (void **)&bdev,
@@ -629,11 +460,13 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ .ops = &bcma_pcie2_ops,
+ };
+
++ dev_info(&bdev->dev, "initializing PCIe controller\n");
++
+ /* Announce this port to ARM/PCI common code */
+ pci_common_init_dev(&bdev->dev, &hw);
+
+ /* Setup virtual-wire interrupts */
-+ bcma_write32(bdev, SOC_PCIE_SYS_RC_INTX_EN, 0xf);
++ bcma_write32(bdev, BCMA_CORE_PCIE2_SYS_RC_INTX_EN, 0xf);
+
+ /* Enable memory and bus master */
+ bcma_write32(bdev, SOC_PCIE_HDR_OFF + 4, 0x6);
@@ -666,5 +499,5 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+module_exit(bcma_pcie2_exit);
+
+MODULE_AUTHOR("Hauke Mehrtens");
-+MODULE_DESCRIPTION("PCIe Gen2 driver for BCMA");
++MODULE_DESCRIPTION("BCM5301X PCIe host controller");
+MODULE_LICENSE("GPLv2");