diff options
Diffstat (limited to 'target/linux/atheros')
4 files changed, 252 insertions, 203 deletions
diff --git a/target/linux/atheros/patches-3.18/100-board.patch b/target/linux/atheros/patches-3.18/100-board.patch index f4f79d8f78..afb8217018 100644 --- a/target/linux/atheros/patches-3.18/100-board.patch +++ b/target/linux/atheros/patches-3.18/100-board.patch @@ -629,7 +629,7 @@ +#endif /* __ASM_MACH_ATH25_WAR_H */ --- /dev/null +++ b/arch/mips/include/asm/mach-ath25/ar2315_regs.h -@@ -0,0 +1,470 @@ +@@ -0,0 +1,480 @@ +/* + * Register definitions for AR2315+ + * @@ -676,10 +676,12 @@ +#define AR2315_WLAN0 0x10000000 /* Wireless MMR */ +#define AR2315_PCI 0x10100000 /* PCI MMR */ +#define AR2315_PCI_SIZE 0x00001000 -+#define AR2315_SDRAMCTL 0x10300000 /* SDRAM MMR */ -+#define AR2315_LOCAL 0x10400000 /* LOCAL BUS MMR */ ++#define AR2315_SDRAMCTL_BASE 0x10300000 /* SDRAM MMR */ ++#define AR2315_SDRAMCTL_SIZE 0x00000020 ++#define AR2315_LOCAL_BASE 0x10400000 /* Local bus MMR */ +#define AR2315_ENET0 0x10500000 /* ETHERNET MMR */ -+#define AR2315_DSLBASE 0x11000000 /* RESET CONTROL MMR */ ++#define AR2315_RST_BASE 0x11000000 /* Reset control MMR */ ++#define AR2315_RST_SIZE 0x00000100 +#define AR2315_UART0 0x11100000 /* UART MMR */ +#define AR2315_SPI_MMR 0x11300000 /* SPI FLASH MMR */ +#define AR2315_PCIEXT 0x80000000 /* pci external */ @@ -691,7 +693,7 @@ +/* + * Cold reset register + */ -+#define AR2315_COLD_RESET (AR2315_DSLBASE + 0x0000) ++#define AR2315_COLD_RESET 0x0000 + +#define AR2315_RESET_COLD_AHB 0x00000001 +#define AR2315_RESET_COLD_APB 0x00000002 @@ -706,7 +708,7 @@ +/* + * Reset register + */ -+#define AR2315_RESET (AR2315_DSLBASE + 0x0004) ++#define AR2315_RESET 0x0004 + +/* warm reset WLAN0 MAC */ +#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 @@ -736,7 +738,7 @@ +/* + * AHB master arbitration control + */ -+#define AR2315_AHB_ARB_CTL (AR2315_DSLBASE + 0x0008) ++#define AR2315_AHB_ARB_CTL 0x0008 + +/* CPU, default */ +#define AR2315_ARB_CPU 0x00000001 @@ -756,7 +758,7 @@ +/* + * Config Register + */ -+#define AR2315_ENDIAN_CTL (AR2315_DSLBASE + 0x000c) ++#define AR2315_ENDIAN_CTL 0x000c + +/* EC - AHB bridge endianess */ +#define AR2315_CONFIG_AHB 0x00000001 @@ -789,14 +791,14 @@ +/* + * NMI control + */ -+#define AR2315_NMI_CTL (AR2315_DSLBASE + 0x0010) ++#define AR2315_NMI_CTL 0x0010 + +#define AR2315_NMI_EN 1 + +/* + * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR231X 1.0). + */ -+#define AR2315_SREV (AR2315_DSLBASE + 0x0014) ++#define AR2315_SREV 0x0014 + +#define AR2315_REV_MAJ 0x00f0 +#define AR2315_REV_MAJ_S 4 @@ -807,7 +809,7 @@ +/* + * Interface Enable + */ -+#define AR2315_IF_CTL (AR2315_DSLBASE + 0x0018) ++#define AR2315_IF_CTL 0x0018 + +#define AR2315_IF_MASK 0x00000007 +#define AR2315_IF_DISABLED 0 @@ -829,9 +831,9 @@ + * APB Interrupt control + */ + -+#define AR2315_ISR (AR2315_DSLBASE + 0x0020) -+#define AR2315_IMR (AR2315_DSLBASE + 0x0024) -+#define AR2315_GISR (AR2315_DSLBASE + 0x0028) ++#define AR2315_ISR 0x0020 ++#define AR2315_IMR 0x0024 ++#define AR2315_GISR 0x0028 + +#define AR2315_ISR_UART0 0x0001 /* high speed UART */ +#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */ @@ -854,10 +856,11 @@ +/* + * Timers + */ -+#define AR2315_TIMER (AR2315_DSLBASE + 0x0030) -+#define AR2315_RELOAD (AR2315_DSLBASE + 0x0034) -+#define AR2315_WD (AR2315_DSLBASE + 0x0038) -+#define AR2315_WDC (AR2315_DSLBASE + 0x003c) ++#define AR2315_TIMER 0x0030 ++#define AR2315_RELOAD 0x0034 ++ ++#define AR2315_WD 0x0038 ++#define AR2315_WDC 0x003c + +#define AR2315_WDC_IGNORE_EXPIRATION 0x00000000 +#define AR2315_WDC_NMI 0x00000001 /* NMI on watchdog */ @@ -866,8 +869,8 @@ +/* + * CPU Performance Counters + */ -+#define AR2315_PERFCNT0 (AR2315_DSLBASE + 0x0048) -+#define AR2315_PERFCNT1 (AR2315_DSLBASE + 0x004c) ++#define AR2315_PERFCNT0 0x0048 ++#define AR2315_PERFCNT1 0x004c + +#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */ +#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */ @@ -888,11 +891,11 @@ +/* + * AHB Error Reporting. + */ -+#define AR2315_AHB_ERR0 (AR2315_DSLBASE + 0x0050) /* error */ -+#define AR2315_AHB_ERR1 (AR2315_DSLBASE + 0x0054) /* haddr */ -+#define AR2315_AHB_ERR2 (AR2315_DSLBASE + 0x0058) /* hwdata */ -+#define AR2315_AHB_ERR3 (AR2315_DSLBASE + 0x005c) /* hrdata */ -+#define AR2315_AHB_ERR4 (AR2315_DSLBASE + 0x0060) /* status */ ++#define AR2315_AHB_ERR0 0x0050 /* error */ ++#define AR2315_AHB_ERR1 0x0054 /* haddr */ ++#define AR2315_AHB_ERR2 0x0058 /* hwdata */ ++#define AR2315_AHB_ERR3 0x005c /* hrdata */ ++#define AR2315_AHB_ERR4 0x0060 /* status */ + +#define AHB_ERROR_DET 1 /* AHB Error has been detected, */ + /* write 1 to clear all bits in ERR0 */ @@ -920,13 +923,13 @@ +/* + * Clock Control + */ -+#define AR2315_PLLC_CTL (AR2315_DSLBASE + 0x0064) -+#define AR2315_PLLV_CTL (AR2315_DSLBASE + 0x0068) -+#define AR2315_CPUCLK (AR2315_DSLBASE + 0x006c) -+#define AR2315_AMBACLK (AR2315_DSLBASE + 0x0070) -+#define AR2315_SYNCCLK (AR2315_DSLBASE + 0x0074) -+#define AR2315_DSL_SLEEP_CTL (AR2315_DSLBASE + 0x0080) -+#define AR2315_DSL_SLEEP_DUR (AR2315_DSLBASE + 0x0084) ++#define AR2315_PLLC_CTL 0x0064 ++#define AR2315_PLLV_CTL 0x0068 ++#define AR2315_CPUCLK 0x006c ++#define AR2315_AMBACLK 0x0070 ++#define AR2315_SYNCCLK 0x0074 ++#define AR2315_DSL_SLEEP_CTL 0x0080 ++#define AR2315_DSL_SLEEP_DUR 0x0084 + +/* PLLc Control fields */ +#define PLLC_REF_DIV_M 0x00000003 @@ -953,14 +956,14 @@ +#define AMBACLK_CLK_DIV_S 2 + +/* GPIO MMR base address */ -+#define AR2315_GPIO (AR2315_DSLBASE + 0x0088) ++#define AR2315_GPIO 0x0088 + +#define AR2315_RESET_GPIO 5 + +/* + * PCI Clock Control + */ -+#define AR2315_PCICLK (AR2315_DSLBASE + 0x00a4) ++#define AR2315_PCICLK 0x00a4 + +#define AR2315_PCICLK_INPUT_M 0x3 +#define AR2315_PCICLK_INPUT_S 0 @@ -981,7 +984,8 @@ +/* + * Observation Control Register + */ -+#define AR2315_OCR (AR2315_DSLBASE + 0x00b0) ++#define AR2315_OCR 0x00b0 ++ +#define OCR_GPIO0_IRIN 0x0040 +#define OCR_GPIO1_IROUT 0x0080 +#define OCR_GPIO3_RXCLR 0x0200 @@ -989,8 +993,8 @@ +/* + * General Clock Control + */ ++#define AR2315_MISCCLK 0x00b4 + -+#define AR2315_MISCCLK (AR2315_DSLBASE + 0x00b4) +#define MISCCLK_PLLBYPASS_EN 0x00000001 +#define MISCCLK_PROCREFCLK 0x00000002 + @@ -998,9 +1002,9 @@ + * SDRAM Controller + * - No read or write buffers are included. + */ -+#define AR2315_MEM_CFG (AR2315_SDRAMCTL + 0x00) -+#define AR2315_MEM_CTRL (AR2315_SDRAMCTL + 0x0c) -+#define AR2315_MEM_REF (AR2315_SDRAMCTL + 0x10) ++#define AR2315_MEM_CFG 0x0000 ++#define AR2315_MEM_CTRL 0x000c ++#define AR2315_MEM_REF 0x0010 + +#define SDRAM_DATA_WIDTH_M 0x00006000 +#define SDRAM_DATA_WIDTH_S 13 @@ -1017,7 +1021,8 @@ +/* + * Local Bus Interface Registers + */ -+#define AR2315_LB_CONFIG (AR2315_LOCAL + 0x0000) ++#define AR2315_LB_CONFIG 0x0000 ++ +#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */ +#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */ +#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */ @@ -1044,13 +1049,15 @@ +#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */ +#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */ + -+#define AR2315_LB_CLKSEL (AR2315_LOCAL + 0x0004) ++#define AR2315_LB_CLKSEL 0x0004 ++ +#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */ + -+#define AR2315_LB_1MS (AR2315_LOCAL + 0x0008) ++#define AR2315_LB_1MS 0x0008 ++ +#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ + -+#define AR2315_LB_MISCCFG (AR2315_LOCAL + 0x000C) ++#define AR2315_LB_MISCCFG 0x000c +#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */ +#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */ +#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */ @@ -1060,24 +1067,27 @@ +#define AR2315_LBM_TIMEOUT_SHFT 7 +#define AR2315_LBM_PORTMUX 0x07000000 + -+#define AR2315_LB_RXTSOFF (AR2315_LOCAL + 0x0010) ++#define AR2315_LB_RXTSOFF 0x0010 ++ ++#define AR2315_LB_TX_CHAIN_EN 0x0100 + -+#define AR2315_LB_TX_CHAIN_EN (AR2315_LOCAL + 0x0100) +#define AR2315_LB_TXEN_0 0x01 +#define AR2315_LB_TXEN_1 0x02 +#define AR2315_LB_TXEN_2 0x04 +#define AR2315_LB_TXEN_3 0x08 + -+#define AR2315_LB_TX_CHAIN_DIS (AR2315_LOCAL + 0x0104) -+#define AR2315_LB_TX_DESC_PTR (AR2315_LOCAL + 0x0200) ++#define AR2315_LB_TX_CHAIN_DIS 0x0104 ++#define AR2315_LB_TX_DESC_PTR 0x0200 ++ ++#define AR2315_LB_RX_CHAIN_EN 0x0400 + -+#define AR2315_LB_RX_CHAIN_EN (AR2315_LOCAL + 0x0400) +#define AR2315_LB_RXEN 0x01 + -+#define AR2315_LB_RX_CHAIN_DIS (AR2315_LOCAL + 0x0404) -+#define AR2315_LB_RX_DESC_PTR (AR2315_LOCAL + 0x0408) ++#define AR2315_LB_RX_CHAIN_DIS 0x0404 ++#define AR2315_LB_RX_DESC_PTR 0x0408 ++ ++#define AR2315_LB_INT_STATUS 0x0500 + -+#define AR2315_LB_INT_STATUS (AR2315_LOCAL + 0x0500) +#define AR2315_INT_TX_DESC 0x0001 +#define AR2315_INT_TX_OK 0x0002 +#define AR2315_INT_TX_ERR 0x0004 @@ -1094,15 +1104,15 @@ +#define AR2315_INT_MBOX_RD 0x2000 + +/* Bit definitions for INT MASK are the same as INT_STATUS */ -+#define AR2315_LB_INT_MASK (AR2315_LOCAL + 0x0504) ++#define AR2315_LB_INT_MASK 0x0504 + -+#define AR2315_LB_INT_EN (AR2315_LOCAL + 0x0508) -+#define AR2315_LB_MBOX (AR2315_LOCAL + 0x0600) ++#define AR2315_LB_INT_EN 0x0508 ++#define AR2315_LB_MBOX 0x0600 + +#endif /* __ASM_MACH_ATH25_AR2315_REGS_H */ --- /dev/null +++ b/arch/mips/include/asm/mach-ath25/ar5312_regs.h -@@ -0,0 +1,224 @@ +@@ -0,0 +1,227 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive @@ -1152,10 +1162,14 @@ +#define AR5312_WLAN1 0x18500000 +#define AR5312_ENET0 0x18100000 +#define AR5312_ENET1 0x18200000 -+#define AR5312_SDRAMCTL 0x18300000 -+#define AR5312_FLASHCTL 0x18400000 -+#define AR5312_APBBASE 0x1c000000 ++#define AR5312_SDRAMCTL_BASE 0x18300000 ++#define AR5312_SDRAMCTL_SIZE 0x00000010 ++#define AR5312_FLASHCTL_BASE 0x18400000 ++#define AR5312_FLASHCTL_SIZE 0x00000010 +#define AR5312_UART0 0x1c000000 /* UART MMR */ ++#define AR5312_GPIO_BASE 0x1c002000 ++#define AR5312_RST_BASE 0x1c003000 ++#define AR5312_RST_SIZE 0x00000100 +#define AR5312_FLASH 0x1e000000 + +/* @@ -1170,21 +1184,21 @@ +#define AR5312_ENET1_MII (AR5312_ENET1 + 0x14) + +/* Reset/Timer Block Address Map */ -+#define AR5312_RESETTMR (AR5312_APBBASE + 0x3000) -+#define AR5312_TIMER (AR5312_RESETTMR + 0x0000) /* countdown timer */ -+#define AR5312_WD_CTRL (AR5312_RESETTMR + 0x0008) /* watchdog cntrl */ -+#define AR5312_WD_TIMER (AR5312_RESETTMR + 0x000c) /* watchdog timer */ -+#define AR5312_ISR (AR5312_RESETTMR + 0x0010) /* Intr Status Reg */ -+#define AR5312_IMR (AR5312_RESETTMR + 0x0014) /* Intr Mask Reg */ -+#define AR5312_RESET (AR5312_RESETTMR + 0x0020) -+#define AR5312_CLOCKCTL1 (AR5312_RESETTMR + 0x0064) -+#define AR5312_SCRATCH (AR5312_RESETTMR + 0x006c) -+#define AR5312_PROCADDR (AR5312_RESETTMR + 0x0070) -+#define AR5312_PROC1 (AR5312_RESETTMR + 0x0074) -+#define AR5312_DMAADDR (AR5312_RESETTMR + 0x0078) -+#define AR5312_DMA1 (AR5312_RESETTMR + 0x007c) -+#define AR5312_ENABLE (AR5312_RESETTMR + 0x0080) /* interface enb */ -+#define AR5312_REV (AR5312_RESETTMR + 0x0090) /* revision */ ++#define AR5312_TIMER 0x0000 /* countdown timer */ ++#define AR5312_RELOAD 0x0004 /* timer reload value */ ++#define AR5312_WD_CTRL 0x0008 /* watchdog cntrl */ ++#define AR5312_WD_TIMER 0x000c /* watchdog timer */ ++#define AR5312_ISR 0x0010 /* Intr Status Reg */ ++#define AR5312_IMR 0x0014 /* Intr Mask Reg */ ++#define AR5312_RESET 0x0020 ++#define AR5312_CLOCKCTL1 0x0064 ++#define AR5312_SCRATCH 0x006c ++#define AR5312_PROCADDR 0x0070 ++#define AR5312_PROC1 0x0074 ++#define AR5312_DMAADDR 0x0078 ++#define AR5312_DMA1 0x007c ++#define AR5312_ENABLE 0x0080 /* interface enb */ ++#define AR5312_REV 0x0090 /* revision */ + +/* AR5312_WD_CTRL register bit field definitions */ +#define AR5312_WD_CTRL_IGNORE_EXPIRATION 0x0000 @@ -1281,6 +1295,11 @@ +#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */ +#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */ + ++/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */ ++#define AR5312_FLASHCTL0 0x0000 ++#define AR5312_FLASHCTL1 0x0004 ++#define AR5312_FLASHCTL2 0x0008 ++ +/* AR5312_FLASHCTL register bit field definitions */ +#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */ +#define FLASHCTL_IDCY_S 0 @@ -1312,24 +1331,18 @@ +#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */ +#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */ + -+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */ -+#define AR5312_FLASHCTL0 (AR5312_FLASHCTL + 0x00) -+#define AR5312_FLASHCTL1 (AR5312_FLASHCTL + 0x04) -+#define AR5312_FLASHCTL2 (AR5312_FLASHCTL + 0x08) -+ +/* ARM SDRAM Controller -- just enough to determine memory size */ -+#define AR5312_MEM_CFG1 (AR5312_SDRAMCTL + 0x04) ++#define AR5312_MEM_CFG1 0x0004 ++ +#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */ +#define MEM_CFG1_AC0_S 8 +#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */ +#define MEM_CFG1_AC1_S 12 + -+#define AR5312_GPIO (AR5312_APBBASE + 0x2000) -+ +#endif /* __ASM_MACH_ATH25_AR5312_REGS_H */ --- /dev/null +++ b/arch/mips/ath25/ar5312.c -@@ -0,0 +1,449 @@ +@@ -0,0 +1,483 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive @@ -1369,12 +1382,33 @@ +#include "devices.h" +#include "ar5312.h" + ++static void __iomem *ar5312_rst_base; ++ ++static inline u32 ar5312_rst_reg_read(u32 reg) ++{ ++ return __raw_readl(ar5312_rst_base + reg); ++} ++ ++static inline void ar5312_rst_reg_write(u32 reg, u32 val) ++{ ++ __raw_writel(val, ar5312_rst_base + reg); ++} ++ ++static inline void ar5312_rst_reg_mask(u32 reg, u32 mask, u32 val) ++{ ++ u32 ret = ar5312_rst_reg_read(reg); ++ ++ ret &= ~mask; ++ ret |= val; ++ ar5312_rst_reg_write(reg, ret); ++} ++ +static irqreturn_t ar5312_ahb_err_handler(int cpl, void *dev_id) +{ -+ u32 proc1 = ar231x_read_reg(AR5312_PROC1); -+ u32 proc_addr = ar231x_read_reg(AR5312_PROCADDR); /* clears error */ -+ u32 dma1 = ar231x_read_reg(AR5312_DMA1); -+ u32 dma_addr = ar231x_read_reg(AR5312_DMAADDR); /* clears error */ ++ u32 proc1 = ar5312_rst_reg_read(AR5312_PROC1); ++ u32 proc_addr = ar5312_rst_reg_read(AR5312_PROCADDR); /* clears error */ ++ u32 dma1 = ar5312_rst_reg_read(AR5312_DMA1); ++ u32 dma_addr = ar5312_rst_reg_read(AR5312_DMAADDR); /* clears error */ + + pr_emerg("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n", + proc_addr, proc1, dma_addr, dma1); @@ -1390,12 +1424,12 @@ + +static void ar5312_misc_irq_handler(unsigned irq, struct irq_desc *desc) +{ -+ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR5312_ISR) & -+ ar231x_read_reg(AR5312_IMR); ++ unsigned int ar231x_misc_intrs = ar5312_rst_reg_read(AR5312_ISR) & ++ ar5312_rst_reg_read(AR5312_IMR); + + if (ar231x_misc_intrs & AR5312_ISR_TIMER) { + generic_handle_irq(AR5312_MISC_IRQ_TIMER); -+ (void)ar231x_read_reg(AR5312_TIMER); ++ (void)ar5312_rst_reg_read(AR5312_TIMER); + } else if (ar231x_misc_intrs & AR5312_ISR_AHBPROC) + generic_handle_irq(AR5312_MISC_IRQ_AHB_PROC); + else if ((ar231x_misc_intrs & AR5312_ISR_UART0)) @@ -1411,9 +1445,9 @@ +{ + unsigned int imr; + -+ imr = ar231x_read_reg(AR5312_IMR); ++ imr = ar5312_rst_reg_read(AR5312_IMR); + imr |= 1 << (d->irq - AR231X_MISC_IRQ_BASE); -+ ar231x_write_reg(AR5312_IMR, imr); ++ ar5312_rst_reg_write(AR5312_IMR, imr); +} + +/* Disable the specified AR5312_MISC_IRQ interrupt */ @@ -1421,10 +1455,10 @@ +{ + unsigned int imr; + -+ imr = ar231x_read_reg(AR5312_IMR); ++ imr = ar5312_rst_reg_read(AR5312_IMR); + imr &= ~(1 << (d->irq - AR231X_MISC_IRQ_BASE)); -+ ar231x_write_reg(AR5312_IMR, imr); -+ ar231x_read_reg(AR5312_IMR); /* flush write buffer */ ++ ar5312_rst_reg_write(AR5312_IMR, imr); ++ ar5312_rst_reg_read(AR5312_IMR); /* flush write buffer */ +} + +static struct irq_chip ar5312_misc_irq_chip = { @@ -1472,16 +1506,16 @@ +{ + u32 val; + -+ val = ar231x_read_reg(AR5312_RESET); -+ ar231x_write_reg(AR5312_RESET, val | mask); ++ val = ar5312_rst_reg_read(AR5312_RESET); ++ ar5312_rst_reg_write(AR5312_RESET, val | mask); +} + +static void ar5312_device_reset_clear(u32 mask) +{ + u32 val; + -+ val = ar231x_read_reg(AR5312_RESET); -+ ar231x_write_reg(AR5312_RESET, val & ~mask); ++ val = ar5312_rst_reg_read(AR5312_RESET); ++ ar5312_rst_reg_write(AR5312_RESET, val & ~mask); +} + +static struct physmap_flash_data ar5312_flash_data = { @@ -1540,7 +1574,26 @@ + */ +static char __init *ar5312_flash_limit(void) +{ ++ void __iomem *flashctl_base; + u32 ctl; ++ ++ flashctl_base = ioremap_nocache(AR5312_FLASHCTL_BASE, ++ AR5312_FLASHCTL_SIZE); ++ ++ ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL0); ++ ctl &= FLASHCTL_MW; ++ ++ /* fixup flash width */ ++ switch (ctl) { ++ case FLASHCTL_MW16: ++ ar5312_flash_data.width = 2; ++ break; ++ case FLASHCTL_MW8: ++ default: ++ ar5312_flash_data.width = 1; ++ break; ++ } ++ + /* + * Configure flash bank 0. + * Assume 8M window size. Flash will be aliased if it's smaller @@ -1551,18 +1604,19 @@ + (0x01 << FLASHCTL_IDCY_S) | + (0x07 << FLASHCTL_WST1_S) | + (0x07 << FLASHCTL_WST2_S) | -+ (ar231x_read_reg(AR5312_FLASHCTL0) & FLASHCTL_MW); ++ ctl; + -+ ar231x_write_reg(AR5312_FLASHCTL0, ctl); ++ __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL0); + + /* Disable other flash banks */ -+ ar231x_write_reg(AR5312_FLASHCTL1, -+ ar231x_read_reg(AR5312_FLASHCTL1) & -+ ~(FLASHCTL_E | FLASHCTL_AC)); ++ ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL1); ++ ctl &= ~(FLASHCTL_E | FLASHCTL_AC); ++ __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL1); ++ ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL2); ++ ctl &= ~(FLASHCTL_E | FLASHCTL_AC); ++ __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL2); + -+ ar231x_write_reg(AR5312_FLASHCTL2, -+ ar231x_read_reg(AR5312_FLASHCTL2) & -+ ~(FLASHCTL_E | FLASHCTL_AC)); ++ iounmap(flashctl_base); + + return (char *)KSEG1ADDR(AR5312_FLASH + 0x800000); +} @@ -1570,7 +1624,6 @@ +void __init ar5312_init_devices(void) +{ + struct ath25_boarddata *config; -+ u32 fctl = 0; + u8 *c; + + /* Locate board/radio config data */ @@ -1589,18 +1642,6 @@ + else + ath25_soc = ATH25_SOC_AR5312; + -+ /* fixup flash width */ -+ fctl = ar231x_read_reg(AR5312_FLASHCTL) & FLASHCTL_MW; -+ switch (fctl) { -+ case FLASHCTL_MW16: -+ ar5312_flash_data.width = 2; -+ break; -+ case FLASHCTL_MW8: -+ default: -+ ar5312_flash_data.width = 1; -+ break; -+ } -+ + platform_device_register(&ar5312_physmap_flash); + +#ifdef CONFIG_LEDS_GPIO @@ -1668,7 +1709,7 @@ + /* reset the system */ + local_irq_disable(); + while (1) -+ ar231x_write_reg(AR5312_RESET, AR5312_RESET_SYSTEM); ++ ar5312_rst_reg_write(AR5312_RESET, AR5312_RESET_SYSTEM); +} + +/* @@ -1687,11 +1728,11 @@ + u16 devid; + + /* Trust the bootrom's idea of cpu frequency. */ -+ scratch = ar231x_read_reg(AR5312_SCRATCH); ++ scratch = ar5312_rst_reg_read(AR5312_SCRATCH); + if (scratch) + return scratch; + -+ devid = ar231x_read_reg(AR5312_REV); ++ devid = ar5312_rst_reg_read(AR5312_REV); + devid &= AR5312_REV_MAJ; + devid >>= AR5312_REV_MAJ_S; + if (devid == AR5312_REV_MAJ_AR2313) { @@ -1726,7 +1767,7 @@ + * We compute the CPU frequency, based on PLL settings. + */ + -+ clock_ctl1 = ar231x_read_reg(AR5312_CLOCKCTL1); ++ clock_ctl1 = ar5312_rst_reg_read(AR5312_CLOCKCTL1); + predivide_select = (clock_ctl1 & predivide_mask) >> predivide_shift; + predivisor = clockctl1_predivide_table[predivide_select]; + multiplier = (clock_ctl1 & multiplier_mask) >> multiplier_shift; @@ -1749,27 +1790,33 @@ + +void __init ar5312_plat_mem_setup(void) +{ ++ void __iomem *sdram_base; + u32 memsize, memcfg, bank0AC, bank1AC; + u32 devid; + + /* Detect memory size */ -+ memcfg = ar231x_read_reg(AR5312_MEM_CFG1); ++ sdram_base = ioremap_nocache(AR5312_SDRAMCTL_BASE, ++ AR5312_SDRAMCTL_SIZE); ++ memcfg = __raw_readl(sdram_base + AR5312_MEM_CFG1); + bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S; + bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S; + memsize = (bank0AC ? (1 << (bank0AC+1)) : 0) + + (bank1AC ? (1 << (bank1AC+1)) : 0); + memsize <<= 20; + add_memory_region(0, memsize, BOOT_MEM_RAM); ++ iounmap(sdram_base); + -+ devid = ar231x_read_reg(AR5312_REV); ++ ar5312_rst_base = ioremap_nocache(AR5312_RST_BASE, AR5312_RST_SIZE); ++ ++ devid = ar5312_rst_reg_read(AR5312_REV); + devid >>= AR5312_REV_WMAC_MIN_S; + devid &= AR5312_REV_CHIP; + ath25_board.devid = (u16)devid; + + /* Clear any lingering AHB errors */ -+ ar231x_read_reg(AR5312_PROCADDR); -+ ar231x_read_reg(AR5312_DMAADDR); -+ ar231x_write_reg(AR5312_WD_CTRL, AR5312_WD_CTRL_IGNORE_EXPIRATION); ++ ar5312_rst_reg_read(AR5312_PROCADDR); ++ ar5312_rst_reg_read(AR5312_DMAADDR); ++ ar5312_rst_reg_write(AR5312_WD_CTRL, AR5312_WD_CTRL_IGNORE_EXPIRATION); + + _machine_restart = ar5312_restart; +} @@ -1781,7 +1828,7 @@ +} --- /dev/null +++ b/arch/mips/ath25/ar2315.c -@@ -0,0 +1,401 @@ +@@ -0,0 +1,428 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive @@ -1821,10 +1868,31 @@ +#include "devices.h" +#include "ar2315.h" + ++static void __iomem *ar2315_rst_base; ++ ++static inline u32 ar2315_rst_reg_read(u32 reg) ++{ ++ return __raw_readl(ar2315_rst_base + reg); ++} ++ ++static inline void ar2315_rst_reg_write(u32 reg, u32 val) ++{ ++ __raw_writel(val, ar2315_rst_base + reg); ++} ++ ++static inline void ar2315_rst_reg_mask(u32 reg, u32 mask, u32 val) ++{ ++ u32 ret = ar2315_rst_reg_read(reg); ++ ++ ret &= ~mask; ++ ret |= val; ++ ar2315_rst_reg_write(reg, ret); ++} ++ +static irqreturn_t ar2315_ahb_err_handler(int cpl, void *dev_id) +{ -+ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET); -+ ar231x_read_reg(AR2315_AHB_ERR1); ++ ar2315_rst_reg_write(AR2315_AHB_ERR0, AHB_ERROR_DET); ++ ar2315_rst_reg_read(AR2315_AHB_ERR1); + + pr_emerg("AHB fatal error\n"); + machine_restart("AHB error"); /* Catastrophic failure */ @@ -1839,8 +1907,8 @@ + +static void ar2315_misc_irq_handler(unsigned irq, struct irq_desc *desc) +{ -+ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & -+ ar231x_read_reg(AR2315_IMR); ++ unsigned int misc_intr = ar2315_rst_reg_read(AR2315_ISR) & ++ ar2315_rst_reg_read(AR2315_IMR); + + if (misc_intr & AR2315_ISR_SPI) + generic_handle_irq(AR2315_MISC_IRQ_SPI); @@ -1849,12 +1917,12 @@ + else if (misc_intr & AR2315_ISR_AHB) + generic_handle_irq(AR2315_MISC_IRQ_AHB); + else if (misc_intr & AR2315_ISR_GPIO) { -+ ar231x_write_reg(AR2315_ISR, AR2315_ISR_GPIO); ++ ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_GPIO); + generic_handle_irq(AR2315_MISC_IRQ_GPIO); + } else if (misc_intr & AR2315_ISR_UART0) + generic_handle_irq(AR2315_MISC_IRQ_UART0); + else if (misc_intr & AR2315_ISR_WD) { -+ ar231x_write_reg(AR2315_ISR, AR2315_ISR_WD); ++ ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_WD); + generic_handle_irq(AR2315_MISC_IRQ_WATCHDOG); + } else + spurious_interrupt(); @@ -1864,18 +1932,18 @@ +{ + unsigned int imr; + -+ imr = ar231x_read_reg(AR2315_IMR); ++ imr = ar2315_rst_reg_read(AR2315_IMR); + imr |= 1 << (d->irq - AR231X_MISC_IRQ_BASE); -+ ar231x_write_reg(AR2315_IMR, imr); ++ ar2315_rst_reg_write(AR2315_IMR, imr); +} + +static void ar2315_misc_irq_mask(struct irq_data *d) +{ + unsigned int imr; + -+ imr = ar231x_read_reg(AR2315_IMR); ++ imr = ar2315_rst_reg_read(AR2315_IMR); + imr &= ~(1 << (d->irq - AR231X_MISC_IRQ_BASE)); -+ ar231x_write_reg(AR2315_IMR, imr); ++ ar2315_rst_reg_write(AR2315_IMR, imr); +} + +static struct irq_chip ar2315_misc_irq_chip = { @@ -1927,16 +1995,16 @@ +{ + u32 val; + -+ val = ar231x_read_reg(AR2315_RESET); -+ ar231x_write_reg(AR2315_RESET, val | mask); ++ val = ar2315_rst_reg_read(AR2315_RESET); ++ ar2315_rst_reg_write(AR2315_RESET, val | mask); +} + +static void ar2315_device_reset_clear(u32 mask) +{ + u32 val; + -+ val = ar231x_read_reg(AR2315_RESET); -+ ar231x_write_reg(AR2315_RESET, val & ~mask); ++ val = ar2315_rst_reg_read(AR2315_RESET); ++ ar2315_rst_reg_write(AR2315_RESET, val & ~mask); +} + +static struct ar231x_eth ar2315_eth_data = { @@ -1971,8 +2039,8 @@ +static struct resource ar2315_wdt_res[] = { + { + .flags = IORESOURCE_MEM, -+ .start = AR2315_WD, -+ .end = AR2315_WD + 8 - 1, ++ .start = AR2315_RST_BASE + AR2315_WD, ++ .end = AR2315_RST_BASE + AR2315_WD + 8 - 1, + }, + { + .flags = IORESOURCE_IRQ, @@ -2063,7 +2131,7 @@ + local_irq_disable(); + + /* try reset the system via reset control */ -+ ar231x_write_reg(AR2315_COLD_RESET, AR2317_RESET_SYSTEM); ++ ar2315_rst_reg_write(AR2315_COLD_RESET, AR2317_RESET_SYSTEM); + + /* Cold reset does not work on the AR2315/6, use the GPIO reset bits + * a workaround. Give it some time to attempt a gpio based hardware @@ -2090,7 +2158,7 @@ + unsigned int pllc_out, refdiv, fdiv, divby2; + unsigned int clk_div; + -+ pllc_ctrl = ar231x_read_reg(AR2315_PLLC_CTL); ++ pllc_ctrl = ar2315_rst_reg_read(AR2315_PLLC_CTL); + refdiv = (pllc_ctrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S; + refdiv = clockctl1_predivide_table[refdiv]; + fdiv = (pllc_ctrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S; @@ -2123,12 +2191,12 @@ + +static inline unsigned ar2315_cpu_frequency(void) +{ -+ return ar2315_sys_clk(ar231x_read_reg(AR2315_CPUCLK)); ++ return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_CPUCLK)); +} + +static inline unsigned ar2315_apb_frequency(void) +{ -+ return ar2315_sys_clk(ar231x_read_reg(AR2315_AMBACLK)); ++ return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_AMBACLK)); +} + +void __init ar2315_plat_time_init(void) @@ -2138,19 +2206,25 @@ + +void __init ar2315_plat_mem_setup(void) +{ ++ void __iomem *sdram_base; + u32 memsize, memcfg; + u32 devid; + u32 config; + -+ memcfg = ar231x_read_reg(AR2315_MEM_CFG); ++ sdram_base = ioremap_nocache(AR2315_SDRAMCTL_BASE, ++ AR2315_SDRAMCTL_SIZE); ++ memcfg = __raw_readl(sdram_base + AR2315_MEM_CFG); + memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S); + memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S); + memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S); + memsize <<= 3; + add_memory_region(0, memsize, BOOT_MEM_RAM); ++ iounmap(sdram_base); ++ ++ ar2315_rst_base = ioremap_nocache(AR2315_RST_BASE, AR2315_RST_SIZE); + + /* Detect the hardware based on the device ID */ -+ devid = ar231x_read_reg(AR2315_SREV) & AR2315_REV_CHIP; ++ devid = ar2315_rst_reg_read(AR2315_SREV) & AR2315_REV_CHIP; + switch (devid) { + case 0x91: /* Need to check */ + ath25_soc = ATH25_SOC_AR2318; @@ -2171,9 +2245,9 @@ + /* Clear any lingering AHB errors */ + config = read_c0_config(); + write_c0_config(config & ~0x3); -+ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET); -+ ar231x_read_reg(AR2315_AHB_ERR1); -+ ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION); ++ ar2315_rst_reg_write(AR2315_AHB_ERR0, AHB_ERROR_DET); ++ ar2315_rst_reg_read(AR2315_AHB_ERR1); ++ ar2315_rst_reg_write(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION); + + _machine_restart = ar2315_restart; +} @@ -2263,7 +2337,7 @@ +#endif --- /dev/null +++ b/arch/mips/include/asm/mach-ath25/ar231x.h -@@ -0,0 +1,38 @@ +@@ -0,0 +1,13 @@ +#ifndef __ASM_MACH_ATH25_AR231X_H +#define __ASM_MACH_ATH25_AR231X_H + @@ -2276,31 +2350,6 @@ +/* Software's idea of interrupts handled by "CPU Interrupt Controller" */ +#define AR231X_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE+7) /* C0_CAUSE: 0x8000 */ + -+static inline u32 -+ar231x_read_reg(u32 reg) -+{ -+ return __raw_readl((void __iomem *)KSEG1ADDR(reg)); -+} -+ -+static inline void -+ar231x_write_reg(u32 reg, u32 val) -+{ -+ __raw_writel(val, (void __iomem *)KSEG1ADDR(reg)); -+} -+ -+static inline u32 -+ar231x_mask_reg(u32 reg, u32 mask, u32 val) -+{ -+ u32 ret; -+ -+ ret = ar231x_read_reg(reg); -+ ret &= ~mask; -+ ret |= val; -+ ar231x_write_reg(reg, ret); -+ -+ return ret; -+} -+ +#endif /* __ASM_MACH_ATH25_AR231X_H */ --- /dev/null +++ b/arch/mips/ath25/devices.h diff --git a/target/linux/atheros/patches-3.18/102-ar5312_gpio.patch b/target/linux/atheros/patches-3.18/102-ar5312_gpio.patch index 47da6de70f..3493e8e434 100644 --- a/target/linux/atheros/patches-3.18/102-ar5312_gpio.patch +++ b/target/linux/atheros/patches-3.18/102-ar5312_gpio.patch @@ -10,7 +10,7 @@ config SOC_AR2315 --- a/arch/mips/ath25/ar5312.c +++ b/arch/mips/ath25/ar5312.c -@@ -184,6 +184,22 @@ static struct platform_device ar5312_phy +@@ -205,6 +205,22 @@ static struct platform_device ar5312_phy .num_resources = 1, }; @@ -18,8 +18,8 @@ + { + .name = "ar5312-gpio", + .flags = IORESOURCE_MEM, -+ .start = AR5312_GPIO, -+ .end = AR5312_GPIO + 0x0c - 1, ++ .start = AR5312_GPIO_BASE, ++ .end = AR5312_GPIO_BASE + 0x0c - 1, + }, +}; + @@ -33,7 +33,7 @@ #ifdef CONFIG_LEDS_GPIO static struct gpio_led ar5312_leds[] = { { .name = "wlan", .gpio = 0, .active_low = 1, }, -@@ -271,6 +287,8 @@ void __init ar5312_init_devices(void) +@@ -299,6 +315,8 @@ void __init ar5312_init_devices(void) platform_device_register(&ar5312_physmap_flash); diff --git a/target/linux/atheros/patches-3.18/103-ar2315_gpio.patch b/target/linux/atheros/patches-3.18/103-ar2315_gpio.patch index 5c72ee1fbf..f0ab110400 100644 --- a/target/linux/atheros/patches-3.18/103-ar2315_gpio.patch +++ b/target/linux/atheros/patches-3.18/103-ar2315_gpio.patch @@ -8,7 +8,7 @@ default y --- a/arch/mips/ath25/ar2315.c +++ b/arch/mips/ath25/ar2315.c -@@ -204,6 +204,34 @@ static struct platform_device ar2315_wdt +@@ -225,6 +225,34 @@ static struct platform_device ar2315_wdt .num_resources = ARRAY_SIZE(ar2315_wdt_res) }; @@ -16,8 +16,8 @@ + { + .name = "ar2315-gpio", + .flags = IORESOURCE_MEM, -+ .start = AR2315_GPIO, -+ .end = AR2315_GPIO + 0x10 - 1, ++ .start = AR2315_RST_BASE + AR2315_GPIO, ++ .end = AR2315_RST_BASE + AR2315_GPIO + 0x10 - 1, + }, + { + .name = "ar2315-gpio", @@ -43,7 +43,7 @@ /* * NB: We use mapping size that is larger than the actual flash size, * but this shouldn't be a problem here, because the flash will simply -@@ -264,6 +292,7 @@ void __init ar2315_init_devices(void) +@@ -285,6 +313,7 @@ void __init ar2315_init_devices(void) ath25_find_config(ar2315_flash_limit()); ar2315_eth_data.macaddr = ath25_board.config->enet0_mac; diff --git a/target/linux/atheros/patches-3.18/105-ar2315_pci.patch b/target/linux/atheros/patches-3.18/105-ar2315_pci.patch index 267053cc8a..6665a1138b 100644 --- a/target/linux/atheros/patches-3.18/105-ar2315_pci.patch +++ b/target/linux/atheros/patches-3.18/105-ar2315_pci.patch @@ -520,7 +520,7 @@ + default y --- a/arch/mips/ath25/ar2315.c +++ b/arch/mips/ath25/ar2315.c -@@ -116,6 +116,10 @@ static void ar2315_irq_dispatch(void) +@@ -137,6 +137,10 @@ static void ar2315_irq_dispatch(void) do_IRQ(AR2315_IRQ_WLAN0_INTRS); else if (pending & CAUSEF_IP4) do_IRQ(AR2315_IRQ_ENET0_INTRS); @@ -531,7 +531,7 @@ else if (pending & CAUSEF_IP2) do_IRQ(AR2315_IRQ_MISC_INTRS); else if (pending & CAUSEF_IP7) -@@ -423,8 +427,60 @@ void __init ar2315_plat_mem_setup(void) +@@ -450,8 +454,60 @@ void __init ar2315_plat_mem_setup(void) _machine_restart = ar2315_restart; } @@ -566,25 +566,25 @@ +#ifdef CONFIG_PCI_AR2315 + if (ath25_soc == ATH25_SOC_AR2315) { + /* Reset PCI DMA logic */ -+ ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA); ++ ar2315_rst_reg_mask(AR2315_RESET, 0, AR2315_RESET_PCIDMA); + msleep(20); -+ ar231x_mask_reg(AR2315_RESET, AR2315_RESET_PCIDMA, 0); ++ ar2315_rst_reg_mask(AR2315_RESET, AR2315_RESET_PCIDMA, 0); + msleep(20); + + /* Configure endians */ -+ ar231x_mask_reg(AR2315_ENDIAN_CTL, 0, AR2315_CONFIG_PCIAHB | -+ AR2315_CONFIG_PCIAHB_BRIDGE); ++ ar2315_rst_reg_mask(AR2315_ENDIAN_CTL, 0, AR2315_CONFIG_PCIAHB | ++ AR2315_CONFIG_PCIAHB_BRIDGE); + + /* Configure as PCI host with DMA */ -+ ar231x_write_reg(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM | -+ (AR2315_PCICLK_IN_FREQ_DIV_6 << -+ AR2315_PCICLK_DIV_S)); -+ ar231x_mask_reg(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI); -+ ar231x_mask_reg(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK | -+ AR2315_IF_MASK, AR2315_IF_PCI | -+ AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR | -+ (AR2315_IF_PCI_CLK_OUTPUT_CLK << -+ AR2315_IF_PCI_CLK_SHIFT)); ++ ar2315_rst_reg_write(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM | ++ (AR2315_PCICLK_IN_FREQ_DIV_6 << ++ AR2315_PCICLK_DIV_S)); ++ ar2315_rst_reg_mask(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI); ++ ar2315_rst_reg_mask(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK | ++ AR2315_IF_MASK, AR2315_IF_PCI | ++ AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR | ++ (AR2315_IF_PCI_CLK_OUTPUT_CLK << ++ AR2315_IF_PCI_CLK_SHIFT)); + + platform_device_register_simple("ar2315-pci", -1, + ar2315_pci_res, |