diff options
Diffstat (limited to 'target/linux/atheros-2.6/files/arch/mips/atheros')
14 files changed, 0 insertions, 2816 deletions
diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/Kconfig b/target/linux/atheros-2.6/files/arch/mips/atheros/Kconfig deleted file mode 100644 index 2170fd710b..0000000000 --- a/target/linux/atheros-2.6/files/arch/mips/atheros/Kconfig +++ /dev/null @@ -1,13 +0,0 @@ - -config ATHEROS_AR5312 - bool "Atheros 5312/2312+ support" - depends on ATHEROS - default y - -config ATHEROS_AR5315 - bool "Atheros 5315/2315+ support" - depends on ATHEROS - default y - - - diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/Makefile b/target/linux/atheros-2.6/files/arch/mips/atheros/Makefile deleted file mode 100644 index 2c2b991bc4..0000000000 --- a/target/linux/atheros-2.6/files/arch/mips/atheros/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 2006 FON Technology, SL. -# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -# Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> -# - -obj-y += board.o prom.o reset.o -obj-$(CONFIG_ATHEROS_AR5312) += ar5312/ -obj-$(CONFIG_ATHEROS_AR5315) += ar5315/ diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/Makefile b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/Makefile deleted file mode 100644 index 6c50d9931d..0000000000 --- a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 2007 FON Technology, SL. -# Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> -# Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> -# - -obj-y := board.o irq.o diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/ar5312.h b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/ar5312.h deleted file mode 100644 index 2b6b875b4f..0000000000 --- a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/ar5312.h +++ /dev/null @@ -1,234 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> - */ - -#ifndef AR5312_H -#define AR5312_H - -#include <asm/addrspace.h> - -/* - * IRQs - */ - -#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ -#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ -#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ -#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */ -#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ - - -/* Address Map */ -#define AR531X_WLAN0 0x18000000 -#define AR531X_WLAN1 0x18500000 -#define AR531X_ENET0 0x18100000 -#define AR531X_ENET1 0x18200000 -#define AR531X_SDRAMCTL 0x18300000 -#define AR531X_FLASHCTL 0x18400000 -#define AR531X_APBBASE 0x1c000000 -#define AR531X_FLASH 0x1e000000 -#define AR531X_UART0 0xbc000003 /* UART MMR */ - -/* - * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that - * should be considered available. The AR5312 supports 2 enet MACS, - * even though many reference boards only actually use 1 of them - * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch. - * The AR2312 supports 1 enet MAC. - */ -#define AR531X_NUM_ENET_MAC 2 - -/* - * Need these defines to determine true number of ethernet MACs - */ -#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ -#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ -#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ -#define AR531X_RADIO_MASK_OFF 0xc8 -#define AR531X_RADIO0_MASK 0x0003 -#define AR531X_RADIO1_MASK 0x000c -#define AR531X_RADIO1_S 2 - -/* - * AR531X_NUM_WMAC defines the number of Wireless MACs that\ - * should be considered available. - */ -#define AR531X_NUM_WMAC 2 - -/* Reset/Timer Block Address Map */ -#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000) -#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */ -#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */ -#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */ -#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */ -#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */ -#define AR531X_RESET (AR531X_RESETTMR + 0x0020) -#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064) -#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c) -#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070) -#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074) -#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078) -#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c) -#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */ -#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */ - -/* AR531X_WD_CTRL register bit field definitions */ -#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000 -#define AR531X_WD_CTRL_NMI 0x0001 -#define AR531X_WD_CTRL_RESET 0x0002 - -/* AR531X_ISR register bit field definitions */ -#define AR531X_ISR_NONE 0x0000 -#define AR531X_ISR_TIMER 0x0001 -#define AR531X_ISR_AHBPROC 0x0002 -#define AR531X_ISR_AHBDMA 0x0004 -#define AR531X_ISR_GPIO 0x0008 -#define AR531X_ISR_UART0 0x0010 -#define AR531X_ISR_UART0DMA 0x0020 -#define AR531X_ISR_WD 0x0040 -#define AR531X_ISR_LOCAL 0x0080 - -/* AR531X_RESET register bit field definitions */ -#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */ -#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */ -#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */ -#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */ -#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */ -#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */ -#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */ -#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */ -#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */ -#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */ -#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */ -#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */ -#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */ -#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */ -#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */ -#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */ -#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */ -#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */ - -#define AR531X_RESET_WMAC0_BITS \ - AR531X_RESET_WLAN0 |\ - AR531X_RESET_WARM_WLAN0_MAC |\ - AR531X_RESET_WARM_WLAN0_BB - -#define AR531X_RESERT_WMAC1_BITS \ - AR531X_RESET_WLAN1 |\ - AR531X_RESET_WARM_WLAN1_MAC |\ - AR531X_RESET_WARM_WLAN1_BB - -/* AR5312_CLOCKCTL1 register bit field definitions */ -#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 -#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 -#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 -#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 -#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 - -/* Valid for AR5312 and AR2312 */ -#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 -#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 -#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 -#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 -#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 - -/* Valid for AR2313 */ -#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000 -#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12 -#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000 -#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16 -#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000 - - -/* AR531X_ENABLE register bit field definitions */ -#define AR531X_ENABLE_WLAN0 0x0001 -#define AR531X_ENABLE_ENET0 0x0002 -#define AR531X_ENABLE_ENET1 0x0004 -#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */ -#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */ -#define AR531X_ENABLE_WLAN1 \ - (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA) - -/* AR531X_REV register bit field definitions */ -#define AR531X_REV_WMAC_MAJ 0xf000 -#define AR531X_REV_WMAC_MAJ_S 12 -#define AR531X_REV_WMAC_MIN 0x0f00 -#define AR531X_REV_WMAC_MIN_S 8 -#define AR531X_REV_MAJ 0x00f0 -#define AR531X_REV_MAJ_S 4 -#define AR531X_REV_MIN 0x000f -#define AR531X_REV_MIN_S 0 -#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN) - -/* Major revision numbers, bits 7..4 of Revision ID register */ -#define AR531X_REV_MAJ_AR5312 0x4 -#define AR531X_REV_MAJ_AR2313 0x5 - -/* Minor revision numbers, bits 3..0 of Revision ID register */ -#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */ -#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */ - -/* AR531X_FLASHCTL register bit field definitions */ -#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */ -#define FLASHCTL_IDCY_S 0 -#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */ -#define FLASHCTL_WST1_S 5 -#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */ -#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */ -#define FLASHCTL_WST2_S 11 -#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */ -#define FLASHCTL_AC_S 16 -#define FLASHCTL_AC_128K 0x00000000 -#define FLASHCTL_AC_256K 0x00010000 -#define FLASHCTL_AC_512K 0x00020000 -#define FLASHCTL_AC_1M 0x00030000 -#define FLASHCTL_AC_2M 0x00040000 -#define FLASHCTL_AC_4M 0x00050000 -#define FLASHCTL_AC_8M 0x00060000 -#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */ -#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */ -#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */ -#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */ -#define FLASHCTL_WP 0x04000000 /* Write protect */ -#define FLASHCTL_BM 0x08000000 /* Burst mode */ -#define FLASHCTL_MW 0x30000000 /* Memory width */ -#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */ -#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */ -#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */ -#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */ -#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */ -#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */ - -/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */ -#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00) -#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04) -#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08) - -/* ARM SDRAM Controller -- just enough to determine memory size */ -#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04) -#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */ -#define MEM_CFG1_AC0_S 8 -#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */ -#define MEM_CFG1_AC1_S 12 - -/* GPIO Address Map */ -#define AR531X_GPIO (AR531X_APBBASE + 0x2000) -#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */ -#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */ -#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */ - -/* GPIO Control Register bit field definitions */ -#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ -#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */ -#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */ -#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ -#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ - -#endif - diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/board.c b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/board.c deleted file mode 100644 index 21073dbbbb..0000000000 --- a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/board.c +++ /dev/null @@ -1,449 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> - */ - -/* - * Platform devices for Atheros SoCs - */ - -#include <linux/autoconf.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/kernel.h> -#include <linux/reboot.h> -#include <asm/bootinfo.h> -#include <asm/reboot.h> -#include <asm/time.h> -#include <asm/irq.h> -#include <asm/io.h> -#include "../ar531x.h" - -#define NO_PHY 0x1f - -static int is_5312 = 0; -static struct platform_device *ar5312_devs[5]; - -static struct resource ar5312_eth0_res[] = { - { - .name = "eth0_membase", - .flags = IORESOURCE_MEM, - .start = KSEG1ADDR(AR531X_ENET0), - .end = KSEG1ADDR(AR531X_ENET0 + 0x2000), - }, - { - .name = "eth0_irq", - .flags = IORESOURCE_IRQ, - .start = AR5312_IRQ_ENET0_INTRS, - .end = AR5312_IRQ_ENET0_INTRS, - }, -}; -static struct ar531x_eth ar5312_eth0_data = { - .phy = NO_PHY, - .mac = 0, - .reset_base = AR531X_RESET, - .reset_mac = AR531X_RESET_ENET0, - .reset_phy = AR531X_RESET_EPHY0, - .phy_base = KSEG1ADDR(AR531X_ENET0), -}; - -static struct resource ar5312_eth1_res[] = { - { - .name = "eth1_membase", - .flags = IORESOURCE_MEM, - .start = KSEG1ADDR(AR531X_ENET1), - .end = KSEG1ADDR(AR531X_ENET1 + 0x2000), - }, - { - .name = "eth1_irq", - .flags = IORESOURCE_IRQ, - .start = AR5312_IRQ_ENET1_INTRS, - .end = AR5312_IRQ_ENET1_INTRS, - }, -}; -static struct ar531x_eth ar5312_eth1_data = { - .phy = NO_PHY, - .mac = 1, - .reset_base = AR531X_RESET, - .reset_mac = AR531X_RESET_ENET1, - .reset_phy = AR531X_RESET_EPHY1, - .phy_base = KSEG1ADDR(AR531X_ENET1), -}; - -static struct platform_device ar5312_eth[] = { - { - .id = 0, - .name = "ar531x-eth", - .dev.platform_data = &ar5312_eth0_data, - .resource = ar5312_eth0_res, - .num_resources = ARRAY_SIZE(ar5312_eth0_res) - }, - { - .id = 1, - .name = "ar531x-eth", - .dev.platform_data = &ar5312_eth1_data, - .resource = ar5312_eth1_res, - .num_resources = ARRAY_SIZE(ar5312_eth1_res) - }, -}; - - -/* - * AR2312/3 ethernet uses the PHY of ENET0, but the MAC - * of ENET1. Atheros calls it 'twisted' for a reason :) - */ -static struct resource ar231x_eth0_res[] = { - { - .name = "eth0_membase", - .flags = IORESOURCE_MEM, - .start = KSEG1ADDR(AR531X_ENET1), - .end = KSEG1ADDR(AR531X_ENET1 + 0x2000), - }, - { - .name = "eth0_irq", - .flags = IORESOURCE_IRQ, - .start = AR5312_IRQ_ENET1_INTRS, - .end = AR5312_IRQ_ENET1_INTRS, - }, -}; -static struct ar531x_eth ar231x_eth0_data = { - .phy = 1, - .mac = 1, - .reset_base = AR531X_RESET, - .reset_mac = AR531X_RESET_ENET1, - .reset_phy = AR531X_RESET_EPHY1, - .phy_base = KSEG1ADDR(AR531X_ENET0), -}; -static struct platform_device ar231x_eth0 = { - .id = 0, - .name = "ar531x-eth", - .dev.platform_data = &ar231x_eth0_data, - .resource = ar231x_eth0_res, - .num_resources = ARRAY_SIZE(ar231x_eth0_res) -}; - - -static struct platform_device ar5312_wmac[] = { - { - .id = 0, - .name = "ar531x-wmac", - }, - { - .id = 1, - .name = "ar531x-wmac", - }, -}; - -static struct physmap_flash_data ar5312_flash_data = { - .width = 2, -}; - -static struct resource ar5312_flash_resource = { - .start = AR531X_FLASH, - .end = AR531X_FLASH + 0x400000 - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ar5312_physmap_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ar5312_flash_data, - }, - .num_resources = 1, - .resource = &ar5312_flash_resource, -}; - - -/* - * NB: This mapping size is larger than the actual flash size, - * but this shouldn't be a problem here, because the flash - * will simply be mapped multiple times. - */ -static char __init *ar5312_flash_limit(void) -{ - u32 ctl; - /* - * Configure flash bank 0. - * Assume 8M window size. Flash will be aliased if it's smaller - */ - ctl = FLASHCTL_E | - FLASHCTL_AC_8M | - FLASHCTL_RBLE | - (0x01 << FLASHCTL_IDCY_S) | - (0x07 << FLASHCTL_WST1_S) | - (0x07 << FLASHCTL_WST2_S) | - (sysRegRead(AR531X_FLASHCTL0) & FLASHCTL_MW); - - sysRegWrite(AR531X_FLASHCTL0, ctl); - - /* Disable other flash banks */ - sysRegWrite(AR531X_FLASHCTL1, - sysRegRead(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC)); - - sysRegWrite(AR531X_FLASHCTL2, - sysRegRead(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC)); - - return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000); -} - -static struct ar531x_config __init *init_wmac(int unit) -{ - struct ar531x_config *config; - - config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL); - config->board = board_config; - config->radio = radio_config; - config->unit = unit; - config->tag = (u_int16_t) ((sysRegRead(AR531X_REV) >> AR531X_REV_WMAC_MIN_S) & AR531X_REV_CHIP); - - return config; -} - -int __init ar5312_init_devices(void) -{ - struct ar531x_boarddata *bcfg; - char *radio, *c; - int dev = 0; - uint32_t fctl = 0; - - if (!is_5312) - return 0; - - /* Locate board/radio config data */ - ar531x_find_config(ar5312_flash_limit()); - bcfg = (struct ar531x_boarddata *) board_config; - - - /* - * Chip IDs and hardware detection for some Atheros - * models are really broken! - * - * Atheros uses a disabled WMAC0 and Silicon ID of AR5312 - * as indication for AR2312, which is otherwise - * indistinguishable from the real AR5312. - */ - if (radio_config) { - radio = radio_config + AR531X_RADIO_MASK_OFF; - if ((*((u32 *) radio) & AR531X_RADIO0_MASK) == 0) - bcfg->config |= BD_ISCASPER; - } else - radio = NULL; - - /* AR2313 has CPU minor rev. 10 */ - if ((current_cpu_data.processor_id & 0xff) == 0x0a) - mips_machtype = MACH_ATHEROS_AR2313; - - /* AR2312 shares the same Silicon ID as AR5312 */ - else if (bcfg->config & BD_ISCASPER) - mips_machtype = MACH_ATHEROS_AR2312; - - /* Everything else is probably AR5312 or compatible */ - else - mips_machtype = MACH_ATHEROS_AR5312; - - ar5312_eth0_data.board_config = board_config; - ar5312_eth1_data.board_config = board_config; - - /* fixup flash width */ - fctl = sysRegRead(AR531X_FLASHCTL) & FLASHCTL_MW; - switch (fctl) { - case FLASHCTL_MWx16: - ar5312_flash_data.width = 2; - break; - case FLASHCTL_MWx8: - default: - ar5312_flash_data.width = 1; - break; - } - - ar5312_devs[dev++] = &ar5312_physmap_flash; - - if (!memcmp(bcfg->enet0Mac, "\xff\xff\xff\xff\xff\xff", 6)) - memcpy(bcfg->enet0Mac, bcfg->enet1Mac, 6); - - if (memcmp(bcfg->enet0Mac, bcfg->enet1Mac, 6) == 0) { - /* ENET0 and ENET1 have the same mac. - * Increment the one from ENET1 */ - c = bcfg->enet1Mac + 5; - while ((c >= (char *) bcfg->enet1Mac) && !(++(*c))) - c--; - } - - switch(mips_machtype) { - case MACH_ATHEROS_AR5312: - ar5312_eth0_data.macaddr = bcfg->enet0Mac; - ar5312_eth1_data.macaddr = bcfg->enet1Mac; - ar5312_devs[dev++] = &ar5312_eth[0]; - ar5312_devs[dev++] = &ar5312_eth[1]; - break; - case MACH_ATHEROS_AR2312: - case MACH_ATHEROS_AR2313: - ar231x_eth0_data.macaddr = bcfg->enet0Mac; - ar5312_devs[dev++] = &ar231x_eth0; - ar5312_flash_data.width = 1; - break; - } - - if (radio) { - if (mips_machtype == MACH_ATHEROS_AR5312) { - if (*((u32 *) radio) & AR531X_RADIO0_MASK) { - ar5312_wmac[0].dev.platform_data = init_wmac(0); - ar5312_devs[dev++] = &ar5312_wmac[0]; - } - } - if (*((u32 *) radio) & AR531X_RADIO1_MASK) { - ar5312_wmac[1].dev.platform_data = init_wmac(1); - ar5312_devs[dev++] = &ar5312_wmac[1]; - } - } - - return platform_add_devices(ar5312_devs, dev); -} - - -static void ar5312_halt(void) -{ - while (1); -} - -static void ar5312_power_off(void) -{ - ar5312_halt(); -} - - -static void ar5312_restart(char *command) -{ - /* reset the system */ - for(;;) sysRegWrite(AR531X_RESET, AR531X_RESET_SYSTEM); -} - - -/* - * This table is indexed by bits 5..4 of the CLOCKCTL1 register - * to determine the predevisor value. - */ -static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { - 1, - 2, - 4, - 5 -}; - - -static unsigned int __init ar5312_cpu_frequency(void) -{ - unsigned int result; - unsigned int predivide_mask, predivide_shift; - unsigned int multiplier_mask, multiplier_shift; - unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier; - unsigned int doubler_mask; - unsigned int wisoc_revision; - - /* Trust the bootrom's idea of cpu frequency. */ - if ((result = sysRegRead(AR5312_SCRATCH))) - return result; - - wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >> AR531X_REV_MAJ_S; - if (wisoc_revision == AR531X_REV_MAJ_AR2313) { - predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK; - predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT; - multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK; - multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT; - doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK; - } else { /* AR5312 and AR2312 */ - predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK; - predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT; - multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK; - multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT; - doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK; - } - - /* - * Clocking is derived from a fixed 40MHz input clock. - * - * cpuFreq = InputClock * MULT (where MULT is PLL multiplier) - * sysFreq = cpuFreq / 4 (used for APB clock, serial, - * flash, Timer, Watchdog Timer) - * - * cntFreq = cpuFreq / 2 (use for CPU count/compare) - * - * So, for example, with a PLL multiplier of 5, we have - * - * cpuFreq = 200MHz - * sysFreq = 50MHz - * cntFreq = 100MHz - * - * We compute the CPU frequency, based on PLL settings. - */ - - clockCtl1 = sysRegRead(AR5312_CLOCKCTL1); - preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift; - preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect]; - multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift; - - if (clockCtl1 & doubler_mask) { - multiplier = multiplier << 1; - } - return (40000000 / preDivisor) * multiplier; -} - -static inline int ar5312_sys_frequency(void) -{ - return ar5312_cpu_frequency() / 4; -} - -static void __init ar5312_time_init(void) -{ - mips_hpt_frequency = ar5312_cpu_frequency() / 2; -} - - -void __init ar5312_prom_init(void) -{ - u32 memsize, memcfg, bank0AC, bank1AC; - - is_5312 = 1; - - /* Detect memory size */ - memcfg = sysRegRead(AR531X_MEM_CFG1); - bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S; - bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S; - memsize = (bank0AC ? (1 << (bank0AC+1)) : 0) - + (bank1AC ? (1 << (bank1AC+1)) : 0); - memsize <<= 20; - add_memory_region(0, memsize, BOOT_MEM_RAM); - - /* Initialize it to AR5312 for now. Real detection will be done - * in ar5312_init_devices() */ - mips_machtype = MACH_ATHEROS_AR5312; -} - -void __init ar5312_plat_setup(void) -{ - /* Clear any lingering AHB errors */ - sysRegRead(AR531X_PROCADDR); - sysRegRead(AR531X_DMAADDR); - sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION); - - board_time_init = ar5312_time_init; - - _machine_restart = ar5312_restart; - _machine_halt = ar5312_halt; - pm_power_off = ar5312_power_off; - - serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency()); -} - -arch_initcall(ar5312_init_devices); diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/irq.c b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/irq.c deleted file mode 100644 index c5062bac48..0000000000 --- a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/irq.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> - */ - -/* - * Platform devices for Atheros SoCs - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/reboot.h> -#include <asm/bootinfo.h> -#include <asm/time.h> -#include <asm/irq.h> -#include <asm/io.h> -#include "../ar531x.h" - -/* - * Called when an interrupt is received, this function - * determines exactly which interrupt it was, and it - * invokes the appropriate handler. - * - * Implicitly, we also define interrupt priority by - * choosing which to dispatch first. - */ -asmlinkage void ar5312_irq_dispatch(void) -{ - int pending = read_c0_status() & read_c0_cause(); - - if (pending & CAUSEF_IP2) - do_IRQ(AR5312_IRQ_WLAN0_INTRS); - else if (pending & CAUSEF_IP3) - do_IRQ(AR5312_IRQ_ENET0_INTRS); - else if (pending & CAUSEF_IP4) - do_IRQ(AR5312_IRQ_ENET1_INTRS); - else if (pending & CAUSEF_IP5) - do_IRQ(AR5312_IRQ_WLAN1_INTRS); - else if (pending & CAUSEF_IP6) { - unsigned int ar531x_misc_intrs = sysRegRead(AR531X_ISR) & sysRegRead(AR531X_IMR); - - if (ar531x_misc_intrs & AR531X_ISR_TIMER) { - do_IRQ(AR531X_MISC_IRQ_TIMER); - (void)sysRegRead(AR531X_TIMER); - } else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC) - do_IRQ(AR531X_MISC_IRQ_AHB_PROC); - else if ((ar531x_misc_intrs & AR531X_ISR_UART0)) - do_IRQ(AR531X_MISC_IRQ_UART0); - else if (ar531x_misc_intrs & AR531X_ISR_WD) - do_IRQ(AR531X_MISC_IRQ_WATCHDOG); - else - do_IRQ(AR531X_MISC_IRQ_NONE); - } else if (pending & CAUSEF_IP7) { - do_IRQ(AR531X_IRQ_CPU_CLOCK); - } - else - do_IRQ(AR531X_IRQ_NONE); -} - - -/* Enable the specified AR531X_MISC_IRQ interrupt */ -static void -ar5312_misc_intr_enable(unsigned int irq) -{ - unsigned int imr; - - imr = sysRegRead(AR531X_IMR); - imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1)); - sysRegWrite(AR531X_IMR, imr); - sysRegRead(AR531X_IMR); /* flush write buffer */ -} - -/* Disable the specified AR531X_MISC_IRQ interrupt */ -static void -ar5312_misc_intr_disable(unsigned int irq) -{ - unsigned int imr; - - imr = sysRegRead(AR531X_IMR); - imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1)); - sysRegWrite(AR531X_IMR, imr); - sysRegRead(AR531X_IMR); /* flush write buffer */ -} - -/* Turn on the specified AR531X_MISC_IRQ interrupt */ -static unsigned int -ar5312_misc_intr_startup(unsigned int irq) -{ - ar5312_misc_intr_enable(irq); - return 0; -} - -/* Turn off the specified AR531X_MISC_IRQ interrupt */ -static void -ar5312_misc_intr_shutdown(unsigned int irq) -{ - ar5312_misc_intr_disable(irq); -} - -static void -ar5312_misc_intr_ack(unsigned int irq) -{ - ar5312_misc_intr_disable(irq); -} - -static void -ar5312_misc_intr_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - ar5312_misc_intr_enable(irq); -} - -static struct irq_chip ar5312_misc_intr_controller = { - .typename = "AR5312 misc", - .startup = ar5312_misc_intr_startup, - .shutdown = ar5312_misc_intr_shutdown, - .enable = ar5312_misc_intr_enable, - .disable = ar5312_misc_intr_disable, - .ack = ar5312_misc_intr_ack, - .end = ar5312_misc_intr_end, -}; - -static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id) -{ - u32 proc1 = sysRegRead(AR531X_PROC1); - u32 procAddr = sysRegRead(AR531X_PROCADDR); /* clears error state */ - u32 dma1 = sysRegRead(AR531X_DMA1); - u32 dmaAddr = sysRegRead(AR531X_DMAADDR); /* clears error state */ - - printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n", - procAddr, proc1, dmaAddr, dma1); - - machine_restart("AHB error"); /* Catastrophic failure */ - return IRQ_HANDLED; -} - - -static struct irqaction ar5312_ahb_proc_interrupt = { - .handler = ar5312_ahb_proc_handler, - .flags = IRQF_DISABLED, - .name = "ar5312_ahb_proc_interrupt", -}; - - -static struct irqaction cascade = { - .handler = no_action, - .flags = IRQF_DISABLED, - .name = "cascade", -}; - -void __init ar5312_misc_intr_init(int irq_base) -{ - int i; - - for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].chip = &ar5312_misc_intr_controller; - } - setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt); - setup_irq(AR5312_IRQ_MISC_INTRS, &cascade); -} - - diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/Makefile b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/Makefile deleted file mode 100644 index 6c50d9931d..0000000000 --- a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 2007 FON Technology, SL. -# Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> -# Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> -# - -obj-y := board.o irq.o diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/ar5315.h b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/ar5315.h deleted file mode 100644 index 567141cb76..0000000000 --- a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/ar5315.h +++ /dev/null @@ -1,688 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> - */ - -#ifndef AR5315_H -#define AR5315_H - -/* - * IRQs - */ -#define AR5315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ -#define AR5315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ -#define AR5315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ -#define AR5315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */ -#define AR5315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ - - -/* - * Address map - */ -#define AR5315_SDRAM0 0x00000000 /* DRAM */ -#define AR5315_SPI_READ 0x08000000 /* SPI FLASH */ -#define AR5315_WLAN0 0xB0000000 /* Wireless MMR */ -#define AR5315_PCI 0xB0100000 /* PCI MMR */ -#define AR5315_SDRAMCTL 0xB0300000 /* SDRAM MMR */ -#define AR5315_LOCAL 0xB0400000 /* LOCAL BUS MMR */ -#define AR5315_ENET0 0xB0500000 /* ETHERNET MMR */ -#define AR5315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */ -#define AR5315_UART0 0xB1100003 /* UART MMR */ -#define AR5315_SPI 0xB1300000 /* SPI FLASH MMR */ -#define AR5315_FLASHBT 0xBfc00000 /* ro boot alias to FLASH */ -#define AR5315_RAM1 0x40000000 /* ram alias */ -#define AR5315_PCIEXT 0x80000000 /* pci external */ -#define AR5315_RAM2 0xc0000000 /* ram alias */ -#define AR5315_RAM3 0xe0000000 /* ram alias */ - -/* - * Reset Register - */ -#define AR5315_COLD_RESET (AR5315_DSLBASE + 0x0000) - -/* Cold Reset */ -#define RESET_COLD_AHB 0x00000001 -#define RESET_COLD_APB 0x00000002 -#define RESET_COLD_CPU 0x00000004 -#define RESET_COLD_CPUWARM 0x00000008 -#define RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */ - -#define AR5317_RESET_SYSTEM 0x00000010 - -/* Warm Reset */ - -#define AR5315_RESET (AR5315_DSLBASE + 0x0004) - -#define AR5315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */ -#define AR5315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */ -#define AR5315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */ -#define AR5315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */ -#define AR5315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */ -#define AR5315_RESET_LOCAL 0x00000020 /* warm reset local bus */ -#define AR5315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */ -#define AR5315_RESET_SPI 0x00000080 /* warm reset SPI interface */ -#define AR5315_RESET_UART0 0x00000100 /* warm reset UART0 */ -#define AR5315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */ -#define AR5315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */ -#define AR5315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */ - -/* - * AHB master arbitration control - */ -#define AR5315_AHB_ARB_CTL (AR5315_DSLBASE + 0x0008) - -#define ARB_CPU 0x00000001 /* CPU, default */ -#define ARB_WLAN 0x00000002 /* WLAN */ -#define ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */ -#define ARB_LOCAL 0x00000008 /* LOCAL */ -#define ARB_PCI 0x00000010 /* PCI */ -#define ARB_ETHERNET 0x00000020 /* Ethernet */ -#define ARB_RETRY 0x00000100 /* retry policy, debug only */ - -/* - * Config Register - */ -#define AR5315_ENDIAN_CTL (AR5315_DSLBASE + 0x000c) - -#define AR5315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */ -#define AR5315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */ -#define AR5315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */ -#define AR5315_CONFIG_PCI 0x00000008 /* PCI byteswap */ -#define AR5315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */ -#define AR5315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */ -#define AR5315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */ - -#define AR5315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */ -#define AR5315_CONFIG_CPU 0x00000400 /* CPU big endian */ -#define AR5315_CONFIG_PCIAHB 0x00000800 -#define AR5315_CONFIG_PCIAHB_BRIDGE 0x00001000 -#define AR5315_CONFIG_SPI 0x00008000 /* SPI byteswap */ -#define AR5315_CONFIG_CPU_DRAM 0x00010000 -#define AR5315_CONFIG_CPU_PCI 0x00020000 -#define AR5315_CONFIG_CPU_MMR 0x00040000 -#define AR5315_CONFIG_BIG 0x00000400 - - -/* - * NMI control - */ -#define AR5315_NMI_CTL (AR5315_DSLBASE + 0x0010) - -#define NMI_EN 1 - -/* - * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0). - */ -#define AR5315_SREV (AR5315_DSLBASE + 0x0014) - -#define AR5315_REV_MAJ 0x00f0 -#define AR5315_REV_MAJ_S 4 -#define AR5315_REV_MIN 0x000f -#define AR5315_REV_MIN_S 0 -#define AR5315_REV_CHIP (AR5315_REV_MAJ|AR5315_REV_MIN) - -/* - * Interface Enable - */ -#define AR5315_IF_CTL (AR5315_DSLBASE + 0x0018) - -#define IF_MASK 0x00000007 -#define IF_DISABLED 0 -#define IF_PCI 1 -#define IF_TS_LOCAL 2 -#define IF_ALL 3 /* only for emulation with separate pins */ -#define IF_LOCAL_HOST 0x00000008 -#define IF_PCI_HOST 0x00000010 -#define IF_PCI_INTR 0x00000020 -#define IF_PCI_CLK_MASK 0x00030000 -#define IF_PCI_CLK_INPUT 0 -#define IF_PCI_CLK_OUTPUT_LOW 1 -#define IF_PCI_CLK_OUTPUT_CLK 2 -#define IF_PCI_CLK_OUTPUT_HIGH 3 -#define IF_PCI_CLK_SHIFT 16 - - -/* Major revision numbers, bits 7..4 of Revision ID register */ -#define REV_MAJ_AR5311 0x01 -#define REV_MAJ_AR5312 0x04 -#define REV_MAJ_AR5315 0x0B - -/* - * APB Interrupt control - */ - -#define AR5315_ISR (AR5315_DSLBASE + 0x0020) -#define AR5315_IMR (AR5315_DSLBASE + 0x0024) -#define AR5315_GISR (AR5315_DSLBASE + 0x0028) - -#define AR5315_ISR_UART0 0x0001 /* high speed UART */ -#define AR5315_ISR_I2C_RSVD 0x0002 /* I2C bus */ -#define AR5315_ISR_SPI 0x0004 /* SPI bus */ -#define AR5315_ISR_AHB 0x0008 /* AHB error */ -#define AR5315_ISR_APB 0x0010 /* APB error */ -#define AR5315_ISR_TIMER 0x0020 /* timer */ -#define AR5315_ISR_GPIO 0x0040 /* GPIO */ -#define AR5315_ISR_WD 0x0080 /* watchdog */ -#define AR5315_ISR_IR_RSVD 0x0100 /* IR */ - -#define AR5315_GISR_MISC 0x0001 -#define AR5315_GISR_WLAN0 0x0002 -#define AR5315_GISR_MPEGTS_RSVD 0x0004 -#define AR5315_GISR_LOCALPCI 0x0008 -#define AR5315_GISR_WMACPOLL 0x0010 -#define AR5315_GISR_TIMER 0x0020 -#define AR5315_GISR_ETHERNET 0x0040 - -/* - * Interrupt routing from IO to the processor IP bits - * Define our inter mask and level - */ -#define AR5315_INTR_MISCIO SR_IBIT3 -#define AR5315_INTR_WLAN0 SR_IBIT4 -#define AR5315_INTR_ENET0 SR_IBIT5 -#define AR5315_INTR_LOCALPCI SR_IBIT6 -#define AR5315_INTR_WMACPOLL SR_IBIT7 -#define AR5315_INTR_COMPARE SR_IBIT8 - -/* - * Timers - */ -#define AR5315_TIMER (AR5315_DSLBASE + 0x0030) -#define AR5315_RELOAD (AR5315_DSLBASE + 0x0034) -#define AR5315_WD (AR5315_DSLBASE + 0x0038) -#define AR5315_WDC (AR5315_DSLBASE + 0x003c) - -#define WDC_RESET 0x00000002 /* reset on watchdog */ -#define WDC_NMI 0x00000001 /* NMI on watchdog */ -#define WDC_IGNORE_EXPIRATION 0x00000000 - -/* - * CPU Performance Counters - */ -#define AR5315_PERFCNT0 (AR5315_DSLBASE + 0x0048) -#define AR5315_PERFCNT1 (AR5315_DSLBASE + 0x004c) - -#define PERF_DATAHIT 0x0001 /* Count Data Cache Hits */ -#define PERF_DATAMISS 0x0002 /* Count Data Cache Misses */ -#define PERF_INSTHIT 0x0004 /* Count Instruction Cache Hits */ -#define PERF_INSTMISS 0x0008 /* Count Instruction Cache Misses */ -#define PERF_ACTIVE 0x0010 /* Count Active Processor Cycles */ -#define PERF_WBHIT 0x0020 /* Count CPU Write Buffer Hits */ -#define PERF_WBMISS 0x0040 /* Count CPU Write Buffer Misses */ - -#define PERF_EB_ARDY 0x0001 /* Count EB_ARdy signal */ -#define PERF_EB_AVALID 0x0002 /* Count EB_AValid signal */ -#define PERF_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */ -#define PERF_EB_RDVAL 0x0008 /* Count EB_RdVal signal */ -#define PERF_VRADDR 0x0010 /* Count valid read address cycles */ -#define PERF_VWADDR 0x0020 /* Count valid write address cycles */ -#define PERF_VWDATA 0x0040 /* Count valid write data cycles */ - -/* - * AHB Error Reporting. - */ -#define AR5315_AHB_ERR0 (AR5315_DSLBASE + 0x0050) /* error */ -#define AR5315_AHB_ERR1 (AR5315_DSLBASE + 0x0054) /* haddr */ -#define AR5315_AHB_ERR2 (AR5315_DSLBASE + 0x0058) /* hwdata */ -#define AR5315_AHB_ERR3 (AR5315_DSLBASE + 0x005c) /* hrdata */ -#define AR5315_AHB_ERR4 (AR5315_DSLBASE + 0x0060) /* status */ - -#define AHB_ERROR_DET 1 /* AHB Error has been detected, */ - /* write 1 to clear all bits in ERR0 */ -#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */ -#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */ - -#define PROCERR_HMAST 0x0000000f -#define PROCERR_HMAST_DFLT 0 -#define PROCERR_HMAST_WMAC 1 -#define PROCERR_HMAST_ENET 2 -#define PROCERR_HMAST_PCIENDPT 3 -#define PROCERR_HMAST_LOCAL 4 -#define PROCERR_HMAST_CPU 5 -#define PROCERR_HMAST_PCITGT 6 - -#define PROCERR_HMAST_S 0 -#define PROCERR_HWRITE 0x00000010 -#define PROCERR_HSIZE 0x00000060 -#define PROCERR_HSIZE_S 5 -#define PROCERR_HTRANS 0x00000180 -#define PROCERR_HTRANS_S 7 -#define PROCERR_HBURST 0x00000e00 -#define PROCERR_HBURST_S 9 - - - -/* - * Clock Control - */ -#define AR5315_PLLC_CTL (AR5315_DSLBASE + 0x0064) -#define AR5315_PLLV_CTL (AR5315_DSLBASE + 0x0068) -#define AR5315_CPUCLK (AR5315_DSLBASE + 0x006c) -#define AR5315_AMBACLK (AR5315_DSLBASE + 0x0070) -#define AR5315_SYNCCLK (AR5315_DSLBASE + 0x0074) -#define AR5315_DSL_SLEEP_CTL (AR5315_DSLBASE + 0x0080) -#define AR5315_DSL_SLEEP_DUR (AR5315_DSLBASE + 0x0084) - -/* PLLc Control fields */ -#define PLLC_REF_DIV_M 0x00000003 -#define PLLC_REF_DIV_S 0 -#define PLLC_FDBACK_DIV_M 0x0000007C -#define PLLC_FDBACK_DIV_S 2 -#define PLLC_ADD_FDBACK_DIV_M 0x00000080 -#define PLLC_ADD_FDBACK_DIV_S 7 -#define PLLC_CLKC_DIV_M 0x0001c000 -#define PLLC_CLKC_DIV_S 14 -#define PLLC_CLKM_DIV_M 0x00700000 -#define PLLC_CLKM_DIV_S 20 - -/* CPU CLK Control fields */ -#define CPUCLK_CLK_SEL_M 0x00000003 -#define CPUCLK_CLK_SEL_S 0 -#define CPUCLK_CLK_DIV_M 0x0000000c -#define CPUCLK_CLK_DIV_S 2 - -/* AMBA CLK Control fields */ -#define AMBACLK_CLK_SEL_M 0x00000003 -#define AMBACLK_CLK_SEL_S 0 -#define AMBACLK_CLK_DIV_M 0x0000000c -#define AMBACLK_CLK_DIV_S 2 - -#if defined(COBRA_EMUL) -#define AR5315_AMBA_CLOCK_RATE 20000000 -#define AR5315_CPU_CLOCK_RATE 40000000 -#else -#if defined(DEFAULT_PLL) -#define AR5315_AMBA_CLOCK_RATE 40000000 -#define AR5315_CPU_CLOCK_RATE 40000000 -#else -#define AR5315_AMBA_CLOCK_RATE 92000000 -#define AR5315_CPU_CLOCK_RATE 184000000 -#endif /* ! DEFAULT_PLL */ -#endif /* ! COBRA_EMUL */ - -#define AR5315_UART_CLOCK_RATE AR5315_AMBA_CLOCK_RATE -#define AR5315_SDRAM_CLOCK_RATE AR5315_AMBA_CLOCK_RATE - -/* - * The UART computes baud rate as: - * baud = clock / (16 * divisor) - * where divisor is specified as a High Byte (DLM) and a Low Byte (DLL). - */ -#define DESIRED_BAUD_RATE 38400 - - -#define CLOCKCTL_UART0 0x0010 /* enable UART0 external clock */ - - - /* - * Applicable "PCICFG" bits for WLAN(s). Assoc status and LED mode. - */ -#define ASSOC_STATUS_M 0x00000003 -#define ASSOC_STATUS_NONE 0 -#define ASSOC_STATUS_PENDING 1 -#define ASSOC_STATUS_ASSOCIATED 2 -#define LED_MODE_M 0x0000001c -#define LED_BLINK_THRESHOLD_M 0x000000e0 -#define LED_SLOW_BLINK_MODE 0x00000100 - -/* - * GPIO - */ - -#define AR5315_GPIO_DI (AR5315_DSLBASE + 0x0088) -#define AR5315_GPIO_DO (AR5315_DSLBASE + 0x0090) -#define AR5315_GPIO_CR (AR5315_DSLBASE + 0x0098) -#define AR5315_GPIO_INT (AR5315_DSLBASE + 0x00a0) - -#define AR5315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ -#define AR5315_GPIO_CR_O(x) (1 << (x)) /* output */ -#define AR5315_GPIO_CR_I(x) (0) /* input */ - -#define AR5315_GPIO_INT_S(x) (x) /* interrupt enable */ -#define AR5315_GPIO_INT_M (0x3F) /* mask for int */ -#define AR5315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */ -#define AR5315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */ - -#define AR5315_RESET_GPIO 5 -#define AR5315_NUM_GPIO 22 - - -/* - * PCI Clock Control - */ - -#define AR5315_PCICLK (AR5315_DSLBASE + 0x00a4) - -#define AR5315_PCICLK_INPUT_M 0x3 -#define AR5315_PCICLK_INPUT_S 0 - -#define AR5315_PCICLK_PLLC_CLKM 0 -#define AR5315_PCICLK_PLLC_CLKM1 1 -#define AR5315_PCICLK_PLLC_CLKC 2 -#define AR5315_PCICLK_REF_CLK 3 - -#define AR5315_PCICLK_DIV_M 0xc -#define AR5315_PCICLK_DIV_S 2 - -#define AR5315_PCICLK_IN_FREQ 0 -#define AR5315_PCICLK_IN_FREQ_DIV_6 1 -#define AR5315_PCICLK_IN_FREQ_DIV_8 2 -#define AR5315_PCICLK_IN_FREQ_DIV_10 3 - -/* - * Observation Control Register - */ -#define AR5315_OCR (AR5315_DSLBASE + 0x00b0) -#define OCR_GPIO0_IRIN 0x0040 -#define OCR_GPIO1_IROUT 0x0080 -#define OCR_GPIO3_RXCLR 0x0200 - -/* - * General Clock Control - */ - -#define AR5315_MISCCLK (AR5315_DSLBASE + 0x00b4) -#define MISCCLK_PLLBYPASS_EN 0x00000001 -#define MISCCLK_PROCREFCLK 0x00000002 - -/* - * SDRAM Controller - * - No read or write buffers are included. - */ -#define AR5315_MEM_CFG (AR5315_SDRAMCTL + 0x00) -#define AR5315_MEM_CTRL (AR5315_SDRAMCTL + 0x0c) -#define AR5315_MEM_REF (AR5315_SDRAMCTL + 0x10) - -#define SDRAM_DATA_WIDTH_M 0x00006000 -#define SDRAM_DATA_WIDTH_S 13 - -#define SDRAM_COL_WIDTH_M 0x00001E00 -#define SDRAM_COL_WIDTH_S 9 - -#define SDRAM_ROW_WIDTH_M 0x000001E0 -#define SDRAM_ROW_WIDTH_S 5 - -#define SDRAM_BANKADDR_BITS_M 0x00000018 -#define SDRAM_BANKADDR_BITS_S 3 - -/* - * SPI Flash Interface Registers - */ - -#define AR5315_SPI_CTL (AR5315_SPI + 0x00) -#define AR5315_SPI_OPCODE (AR5315_SPI + 0x04) -#define AR5315_SPI_DATA (AR5315_SPI + 0x08) - -#define SPI_CTL_START 0x00000100 -#define SPI_CTL_BUSY 0x00010000 -#define SPI_CTL_TXCNT_MASK 0x0000000f -#define SPI_CTL_RXCNT_MASK 0x000000f0 -#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff -#define SPI_CTL_SIZE_MASK 0x00060000 - -#define SPI_CTL_CLK_SEL_MASK 0x03000000 -#define SPI_OPCODE_MASK 0x000000ff - -/* - * PCI-MAC Configuration registers - */ -#define PCI_MAC_RC (AR5315_PCI + 0x4000) -#define PCI_MAC_SCR (AR5315_PCI + 0x4004) -#define PCI_MAC_INTPEND (AR5315_PCI + 0x4008) -#define PCI_MAC_SFR (AR5315_PCI + 0x400C) -#define PCI_MAC_PCICFG (AR5315_PCI + 0x4010) -#define PCI_MAC_SREV (AR5315_PCI + 0x4020) - -#define PCI_MAC_RC_MAC 0x00000001 -#define PCI_MAC_RC_BB 0x00000002 - -#define PCI_MAC_SCR_SLMODE_M 0x00030000 -#define PCI_MAC_SCR_SLMODE_S 16 -#define PCI_MAC_SCR_SLM_FWAKE 0 -#define PCI_MAC_SCR_SLM_FSLEEP 1 -#define PCI_MAC_SCR_SLM_NORMAL 2 - -#define PCI_MAC_SFR_SLEEP 0x00000001 - -#define PCI_MAC_PCICFG_SPWR_DN 0x00010000 - - -/* - * PCI Bus Interface Registers - */ -#define AR5315_PCI_1MS_REG (AR5315_PCI + 0x0008) -#define AR5315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ - -#define AR5315_PCI_MISC_CONFIG (AR5315_PCI + 0x000c) -#define AR5315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */ -#define AR5315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */ -#define AR5315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */ -#define AR5315_PCIMISC_RST_MODE 0x00000030 -#define AR5315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */ -#define AR5315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */ -#define AR5315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */ -#define AR5315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */ -#define AR5315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */ -#define AR5315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */ -#define AR5315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */ -#define AR5315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */ - -#define AR5315_PCI_OUT_TSTAMP (AR5315_PCI + 0x0010) - -#define AR5315_PCI_UNCACHE_CFG (AR5315_PCI + 0x0014) - -#define AR5315_PCI_IN_EN (AR5315_PCI + 0x0100) -#define AR5315_PCI_IN_EN0 0x01 /* Enable chain 0 */ -#define AR5315_PCI_IN_EN1 0x02 /* Enable chain 1 */ -#define AR5315_PCI_IN_EN2 0x04 /* Enable chain 2 */ -#define AR5315_PCI_IN_EN3 0x08 /* Enable chain 3 */ - -#define AR5315_PCI_IN_DIS (AR5315_PCI + 0x0104) -#define AR5315_PCI_IN_DIS0 0x01 /* Disable chain 0 */ -#define AR5315_PCI_IN_DIS1 0x02 /* Disable chain 1 */ -#define AR5315_PCI_IN_DIS2 0x04 /* Disable chain 2 */ -#define AR5315_PCI_IN_DIS3 0x08 /* Disable chain 3 */ - -#define AR5315_PCI_IN_PTR (AR5315_PCI + 0x0200) - -#define AR5315_PCI_OUT_EN (AR5315_PCI + 0x0400) -#define AR5315_PCI_OUT_EN0 0x01 /* Enable chain 0 */ - -#define AR5315_PCI_OUT_DIS (AR5315_PCI + 0x0404) -#define AR5315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */ - -#define AR5315_PCI_OUT_PTR (AR5315_PCI + 0x0408) - -#define AR5315_PCI_INT_STATUS (AR5315_PCI + 0x0500) /* write one to clr */ -#define AR5315_PCI_TXINT 0x00000001 /* Desc In Completed */ -#define AR5315_PCI_TXOK 0x00000002 /* Desc In OK */ -#define AR5315_PCI_TXERR 0x00000004 /* Desc In ERR */ -#define AR5315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */ -#define AR5315_PCI_RXINT 0x00000010 /* Desc Out Completed */ -#define AR5315_PCI_RXOK 0x00000020 /* Desc Out OK */ -#define AR5315_PCI_RXERR 0x00000040 /* Desc Out ERR */ -#define AR5315_PCI_RXEOL 0x00000080 /* Desc Out EOL */ -#define AR5315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */ -#define AR5315_PCI_MASK 0x0000FFFF /* Desc Mask */ -#define AR5315_PCI_EXT_INT 0x02000000 -#define AR5315_PCI_ABORT_INT 0x04000000 - -#define AR5315_PCI_INT_MASK (AR5315_PCI + 0x0504) /* same as INT_STATUS */ - -#define AR5315_PCI_INTEN_REG (AR5315_PCI + 0x0508) -#define AR5315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */ -#define AR5315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */ - -#define AR5315_PCI_HOST_IN_EN (AR5315_PCI + 0x0800) -#define AR5315_PCI_HOST_IN_DIS (AR5315_PCI + 0x0804) -#define AR5315_PCI_HOST_IN_PTR (AR5315_PCI + 0x0810) -#define AR5315_PCI_HOST_OUT_EN (AR5315_PCI + 0x0900) -#define AR5315_PCI_HOST_OUT_DIS (AR5315_PCI + 0x0904) -#define AR5315_PCI_HOST_OUT_PTR (AR5315_PCI + 0x0908) - - -/* - * Local Bus Interface Registers - */ -#define AR5315_LB_CONFIG (AR5315_LOCAL + 0x0000) -#define AR5315_LBCONF_OE 0x00000001 /* =1 OE is low-true */ -#define AR5315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */ -#define AR5315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */ -#define AR5315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */ -#define AR5315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */ -#define AR5315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */ -#define AR5315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */ -#define AR5315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */ -#define AR5315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */ -#define AR5315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */ -#define AR5315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */ -#define AR5315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */ -#define AR5315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */ -#define AR5315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */ -#define AR5315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */ -#define AR5315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */ -#define AR5315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */ -#define AR5315_LBCONF_INT 0x00020000 /* =1 Intr is low true */ -#define AR5315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */ -#define AR5315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */ -#define AR5315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */ -#define AR5315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */ -#define AR5315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */ -#define AR5315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */ -#define AR5315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */ - -#define AR5315_LB_CLKSEL (AR5315_LOCAL + 0x0004) -#define AR5315_LBCLK_EXT 0x0001 /* use external clk for lb */ - -#define AR5315_LB_1MS (AR5315_LOCAL + 0x0008) -#define AR5315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ - -#define AR5315_LB_MISCCFG (AR5315_LOCAL + 0x000C) -#define AR5315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */ -#define AR5315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */ -#define AR5315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */ -#define AR5315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */ -#define AR5315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */ -#define AR5315_LBM_TIMEOUT_MASK 0x00FFFF80 -#define AR5315_LBM_TIMEOUT_SHFT 7 -#define AR5315_LBM_PORTMUX 0x07000000 - - -#define AR5315_LB_RXTSOFF (AR5315_LOCAL + 0x0010) - -#define AR5315_LB_TX_CHAIN_EN (AR5315_LOCAL + 0x0100) -#define AR5315_LB_TXEN_0 0x01 -#define AR5315_LB_TXEN_1 0x02 -#define AR5315_LB_TXEN_2 0x04 -#define AR5315_LB_TXEN_3 0x08 - -#define AR5315_LB_TX_CHAIN_DIS (AR5315_LOCAL + 0x0104) -#define AR5315_LB_TX_DESC_PTR (AR5315_LOCAL + 0x0200) - -#define AR5315_LB_RX_CHAIN_EN (AR5315_LOCAL + 0x0400) -#define AR5315_LB_RXEN 0x01 - -#define AR5315_LB_RX_CHAIN_DIS (AR5315_LOCAL + 0x0404) -#define AR5315_LB_RX_DESC_PTR (AR5315_LOCAL + 0x0408) - -#define AR5315_LB_INT_STATUS (AR5315_LOCAL + 0x0500) -#define AR5315_INT_TX_DESC 0x0001 -#define AR5315_INT_TX_OK 0x0002 -#define AR5315_INT_TX_ERR 0x0004 -#define AR5315_INT_TX_EOF 0x0008 -#define AR5315_INT_RX_DESC 0x0010 -#define AR5315_INT_RX_OK 0x0020 -#define AR5315_INT_RX_ERR 0x0040 -#define AR5315_INT_RX_EOF 0x0080 -#define AR5315_INT_TX_TRUNC 0x0100 -#define AR5315_INT_TX_STARVE 0x0200 -#define AR5315_INT_LB_TIMEOUT 0x0400 -#define AR5315_INT_LB_ERR 0x0800 -#define AR5315_INT_MBOX_WR 0x1000 -#define AR5315_INT_MBOX_RD 0x2000 - -/* Bit definitions for INT MASK are the same as INT_STATUS */ -#define AR5315_LB_INT_MASK (AR5315_LOCAL + 0x0504) - -#define AR5315_LB_INT_EN (AR5315_LOCAL + 0x0508) -#define AR5315_LB_MBOX (AR5315_LOCAL + 0x0600) - - - -/* - * IR Interface Registers - */ -#define AR5315_IR_PKTDATA (AR5315_IR + 0x0000) - -#define AR5315_IR_PKTLEN (AR5315_IR + 0x07fc) /* 0 - 63 */ - -#define AR5315_IR_CONTROL (AR5315_IR + 0x0800) -#define AR5315_IRCTL_TX 0x00000000 /* use as tranmitter */ -#define AR5315_IRCTL_RX 0x00000001 /* use as receiver */ -#define AR5315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */ -#define AR5315_IRCTL_SAMPLECLK_SHFT 1 -#define AR5315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */ -#define AR5315_IRCTL_OUTPUTCLK_SHFT 14 - -#define AR5315_IR_STATUS (AR5315_IR + 0x0804) -#define AR5315_IRSTS_RX 0x00000001 /* receive in progress */ -#define AR5315_IRSTS_TX 0x00000002 /* transmit in progress */ - -#define AR5315_IR_CONFIG (AR5315_IR + 0x0808) -#define AR5315_IRCFG_INVIN 0x00000001 /* invert input polarity */ -#define AR5315_IRCFG_INVOUT 0x00000002 /* invert output polarity */ -#define AR5315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */ -#define AR5315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */ -#define AR5315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */ -#define AR5315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */ -#define AR5315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */ -#define AR5315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */ -#define AR5315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */ - -/* - * PCI memory constants: Memory area 1 and 2 are the same size - - * (twice the PCI_TLB_PAGE_SIZE). The definition of - * CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine - * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size - * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space. - */ - -#define CPU_TO_PCI_MEM_BASE1 0xE0000000 -#define CPU_TO_PCI_MEM_SIZE1 (2*PCI_TLB_PAGE_SIZE) - - -/* TLB attributes for PCI transactions */ - -#define PCI_MMU_PAGEMASK 0x00003FFF -#define MMU_PAGE_UNCACHED 0x00000010 -#define MMU_PAGE_DIRTY 0x00000004 -#define MMU_PAGE_VALID 0x00000002 -#define MMU_PAGE_GLOBAL 0x00000001 -#define PCI_MMU_PAGEATTRIB (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\ - MMU_PAGE_VALID|MMU_PAGE_GLOBAL) -#define PCI_MEMORY_SPACE1_VIRT 0xE0000000 /* Used for non-prefet mem */ -#define PCI_MEMORY_SPACE1_PHYS 0x80000000 -#define PCI_TLB_PAGE_SIZE 0x01000000 -#define TLB_HI_MASK 0xFFFFE000 -#define TLB_LO_MASK 0x3FFFFFFF -#define PAGEMASK_SHIFT 11 -#define TLB_LO_SHIFT 6 - -#define PCI_MAX_LATENCY 0xFFF /* Max PCI latency */ - -#define HOST_PCI_DEV_ID 3 -#define HOST_PCI_MBAR0 0x10000000 -#define HOST_PCI_MBAR1 0x20000000 -#define HOST_PCI_MBAR2 0x30000000 - -#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1 -#define PCI_DEVICE_MEM_SPACE 0x800000 - -#endif - diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/board.c b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/board.c deleted file mode 100644 index 8247d8548c..0000000000 --- a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/board.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> - */ - -/* - * Platform devices for Atheros SoCs - */ - -#include <linux/autoconf.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/platform_device.h> -#include <linux/kernel.h> -#include <linux/reboot.h> -#include <asm/bootinfo.h> -#include <asm/reboot.h> -#include <asm/time.h> -#include <asm/irq.h> -#include <asm/io.h> -#include "../ar531x.h" - -static int is_5315 = 0; - -static struct resource ar5315_eth_res[] = { - { - .name = "eth0_membase", - .flags = IORESOURCE_MEM, - .start = AR5315_ENET0, - .end = AR5315_ENET0 + 0x2000, - }, - { - .name = "eth0_irq", - .flags = IORESOURCE_IRQ, - .start = AR5315_IRQ_ENET0_INTRS, - .end = AR5315_IRQ_ENET0_INTRS, - }, -}; - -static struct ar531x_eth ar5315_eth_data = { - .phy = 1, - .mac = 0, - .reset_base = AR5315_RESET, - .reset_mac = AR5315_RESET_ENET0, - .reset_phy = AR5315_RESET_EPHY0, - .phy_base = AR5315_ENET0 -}; - -static struct platform_device ar5315_eth = { - .id = 0, - .name = "ar531x-eth", - .dev.platform_data = &ar5315_eth_data, - .resource = ar5315_eth_res, - .num_resources = ARRAY_SIZE(ar5315_eth_res) -}; - -static struct platform_device ar5315_wmac = { - .id = 0, - .name = "ar531x-wmac", - /* FIXME: add resources */ -}; - -static struct resource ar5315_spiflash_res[] = { - { - .name = "flash_base", - .flags = IORESOURCE_MEM, - .start = KSEG1ADDR(AR5315_SPI_READ), - .end = KSEG1ADDR(AR5315_SPI_READ) + 0x800000, - }, - { - .name = "flash_regs", - .flags = IORESOURCE_MEM, - .start = 0x11300000, - .end = 0x11300012, - }, -}; - -static struct platform_device ar5315_spiflash = { - .id = 0, - .name = "spiflash", - .resource = ar5315_spiflash_res, - .num_resources = ARRAY_SIZE(ar5315_spiflash_res) -}; - -static __initdata struct platform_device *ar5315_devs[4]; - - - -static void *flash_regs; - -static inline __u32 spiflash_regread32(int reg) -{ - volatile __u32 *data = (__u32 *)(flash_regs + reg); - - return (*data); -} - -static inline void spiflash_regwrite32(int reg, __u32 data) -{ - volatile __u32 *addr = (__u32 *)(flash_regs + reg); - - *addr = data; -} - -#define SPI_FLASH_CTL 0x00 -#define SPI_FLASH_OPCODE 0x04 -#define SPI_FLASH_DATA 0x08 - -static __u8 spiflash_probe(void) -{ - __u32 reg; - - do { - reg = spiflash_regread32(SPI_FLASH_CTL); - } while (reg & SPI_CTL_BUSY); - - spiflash_regwrite32(SPI_FLASH_OPCODE, 0xab); - - reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | 4 | - (1 << 4) | SPI_CTL_START; - - spiflash_regwrite32(SPI_FLASH_CTL, reg); - - do { - reg = spiflash_regread32(SPI_FLASH_CTL); - } while (reg & SPI_CTL_BUSY); - - reg = (__u32) spiflash_regread32(SPI_FLASH_DATA); - reg &= 0xff; - - return (u8) reg; -} - - -#define STM_8MBIT_SIGNATURE 0x13 -#define STM_16MBIT_SIGNATURE 0x14 -#define STM_32MBIT_SIGNATURE 0x15 -#define STM_64MBIT_SIGNATURE 0x16 -#define STM_128MBIT_SIGNATURE 0x17 - - -static char __init *ar5315_flash_limit(void) -{ - u8 sig; - u32 flash_size = 0; - - /* probe the flash chip size */ - flash_regs = ioremap_nocache(ar5315_spiflash_res[1].start, ar5315_spiflash_res[1].end - ar5315_spiflash_res[1].start); - sig = spiflash_probe(); - iounmap(flash_regs); - - switch(sig) { - case STM_8MBIT_SIGNATURE: - flash_size = 0x00100000; - break; - case STM_16MBIT_SIGNATURE: - flash_size = 0x00200000; - break; - case STM_32MBIT_SIGNATURE: - flash_size = 0x00400000; - break; - case STM_64MBIT_SIGNATURE: - flash_size = 0x00800000; - break; - case STM_128MBIT_SIGNATURE: - flash_size = 0x01000000; - break; - } - - ar5315_spiflash_res[0].end = ar5315_spiflash_res[0].start + flash_size; - return (char *) ar5315_spiflash_res[0].end; -} - -int __init ar5315_init_devices(void) -{ - struct ar531x_config *config; - struct ar531x_boarddata *bcfg; - int dev = 0; - - if (!is_5315) - return 0; - - /* Find board configuration */ - ar531x_find_config(ar5315_flash_limit()); - bcfg = (struct ar531x_boarddata *) board_config; - -#if 0 - { - /* Detect the hardware based on the device ID */ - u32 devid = sysRegRead(AR5315_SREV) & AR5315_REV_MAJ >> AR5315_REV_MAJ_S; - switch(devid) { - case 0x9: - mips_machtype = MACH_ATHEROS_AR2317; - break; - /* FIXME: how can we detect AR2316? */ - case 0x8: - default: - mips_machtype = MACH_ATHEROS_AR2315; - break; - } - } -#endif - - config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL); - config->board = board_config; - config->radio = radio_config; - config->unit = 0; - config->tag = (u_int16_t) (sysRegRead(AR5315_SREV) & AR5315_REV_CHIP); - - ar5315_eth_data.board_config = board_config; - ar5315_eth_data.macaddr = bcfg->enet0Mac; - ar5315_wmac.dev.platform_data = config; - - ar5315_devs[dev++] = &ar5315_eth; - ar5315_devs[dev++] = &ar5315_wmac; - ar5315_devs[dev++] = &ar5315_spiflash; - - - return platform_add_devices(ar5315_devs, dev); -} - -static void ar5315_halt(void) -{ - while (1); -} - -static void ar5315_power_off(void) -{ - ar5315_halt(); -} - - -static void ar5315_restart(char *command) -{ - unsigned int reg; - for(;;) { - - /* reset the system */ - sysRegWrite(AR5315_COLD_RESET,AR5317_RESET_SYSTEM); - - /* - * Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround. - */ - - reg = sysRegRead(AR5315_GPIO_DO); - reg &= ~(1 << AR5315_RESET_GPIO); - sysRegWrite(AR5315_GPIO_DO, reg); - (void)sysRegRead(AR5315_GPIO_DO); /* flush write to hardware */ - } -} - - -/* - * This table is indexed by bits 5..4 of the CLOCKCTL1 register - * to determine the predevisor value. - */ -static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { - 1, - 2, - 4, - 5 -}; - -static int __initdata PLLC_DIVIDE_TABLE[5] = { - 2, - 3, - 4, - 6, - 3 -}; - -static unsigned int __init -ar5315_sys_clk(unsigned int clockCtl) -{ - unsigned int pllcCtrl,cpuDiv; - unsigned int pllcOut,refdiv,fdiv,divby2; - unsigned int clkDiv; - - pllcCtrl = sysRegRead(AR5315_PLLC_CTL); - refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S; - refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv]; - fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S; - divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S; - divby2 += 1; - pllcOut = (40000000/refdiv)*(2*divby2)*fdiv; - - - /* clkm input selected */ - switch(clockCtl & CPUCLK_CLK_SEL_M) { - case 0: - case 1: - clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S]; - break; - case 2: - clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S]; - break; - default: - pllcOut = 40000000; - clkDiv = 1; - break; - } - cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S; - cpuDiv = cpuDiv * 2 ?: 1; - return (pllcOut/(clkDiv * cpuDiv)); -} - -static inline unsigned int ar5315_cpu_frequency(void) -{ - return ar5315_sys_clk(sysRegRead(AR5315_CPUCLK)); -} - -static inline unsigned int ar5315_apb_frequency(void) -{ - return ar5315_sys_clk(sysRegRead(AR5315_AMBACLK)); -} - -static void __init ar5315_time_init(void) -{ - mips_hpt_frequency = ar5315_cpu_frequency() / 2; -} - -void __init ar5315_prom_init(void) -{ - u32 memsize, memcfg; - - is_5315 = 1; - memcfg = sysRegRead(AR5315_MEM_CFG); - memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S); - memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S); - memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S); - memsize <<= 3; - add_memory_region(0, memsize, BOOT_MEM_RAM); - - /* Initialize it to AR2315 for now. Real detection will be done - * in ar5315_init_devices() */ - mips_machtype = MACH_ATHEROS_AR2315; -} - -void __init ar5315_plat_setup(void) -{ - unsigned int config = read_c0_config(); - - /* Clear any lingering AHB errors */ - write_c0_config(config & ~0x3); - sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET); - sysRegRead(AR5315_AHB_ERR1); - sysRegWrite(AR5315_WDC, WDC_IGNORE_EXPIRATION); - - board_time_init = ar5315_time_init; - - _machine_restart = ar5315_restart; - _machine_halt = ar5315_halt; - pm_power_off = ar5315_power_off; - - serial_setup(KSEG1ADDR(AR5315_UART0), ar5315_apb_frequency()); -} - -arch_initcall(ar5315_init_devices); diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/irq.c b/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/irq.c deleted file mode 100644 index eb2e1a7ae1..0000000000 --- a/target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/irq.c +++ /dev/null @@ -1,330 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> - */ - -/* - * Platform devices for Atheros SoCs - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/reboot.h> -#include <linux/interrupt.h> -#include <asm/bootinfo.h> -#include <asm/irq_cpu.h> -#include <asm/io.h> -#include "../ar531x.h" - -static u32 gpiointmask = 0, gpiointval = 0; - -static inline void ar5315_gpio_irq(void) -{ - u32 pend; - sysRegWrite(AR5315_ISR, sysRegRead(AR5315_IMR) | ~AR5315_ISR_GPIO); - - /* only do one gpio interrupt at a time */ - pend = (sysRegRead(AR5315_GPIO_DI) ^ gpiointval) & gpiointmask; - if (!pend) - return; - - do_IRQ(AR531X_GPIO_IRQ_BASE + 31 - clz(pend)); -} - - -/* - * Called when an interrupt is received, this function - * determines exactly which interrupt it was, and it - * invokes the appropriate handler. - * - * Implicitly, we also define interrupt priority by - * choosing which to dispatch first. - */ -asmlinkage void ar5315_irq_dispatch(void) -{ - int pending = read_c0_status() & read_c0_cause(); - - if (pending & CAUSEF_IP3) - do_IRQ(AR5315_IRQ_WLAN0_INTRS); - else if (pending & CAUSEF_IP4) - do_IRQ(AR5315_IRQ_ENET0_INTRS); - else if (pending & CAUSEF_IP2) { - unsigned int ar531x_misc_intrs = sysRegRead(AR5315_ISR) & sysRegRead(AR5315_IMR); - - if (ar531x_misc_intrs & AR5315_ISR_SPI) - do_IRQ(AR531X_MISC_IRQ_SPI); - else if (ar531x_misc_intrs & AR5315_ISR_TIMER) - do_IRQ(AR531X_MISC_IRQ_TIMER); - else if (ar531x_misc_intrs & AR5315_ISR_AHB) - do_IRQ(AR531X_MISC_IRQ_AHB_PROC); - else if (ar531x_misc_intrs & AR5315_ISR_GPIO) - ar5315_gpio_irq(); - else if (ar531x_misc_intrs & AR5315_ISR_UART0) - do_IRQ(AR531X_MISC_IRQ_UART0); - else if (ar531x_misc_intrs & AR5315_ISR_WD) - do_IRQ(AR531X_MISC_IRQ_WATCHDOG); - else - do_IRQ(AR531X_MISC_IRQ_NONE); - } else if (pending & CAUSEF_IP7) - do_IRQ(AR531X_IRQ_CPU_CLOCK); - else - do_IRQ(AR531X_IRQ_NONE); -} - -static void ar5315_gpio_intr_enable(unsigned int irq) -{ - u32 gpio, mask; - gpio = irq - AR531X_GPIO_IRQ_BASE; - mask = 1 << gpio; - gpiointmask |= mask; - - /* reconfigure GPIO line as input */ - sysRegMask(AR5315_GPIO_CR, AR5315_GPIO_CR_M(gpio), AR5315_GPIO_CR_I(gpio)); - - /* Enable interrupt with edge detection */ - sysRegMask(AR5315_GPIO_INT, AR5315_GPIO_INT_M | AR5315_GPIO_INT_LVL_M, gpio | AR5315_GPIO_INT_LVL(3)); -} - -static void ar5315_gpio_intr_disable(unsigned int irq) -{ - u32 gpio, mask; - gpio = irq - AR531X_GPIO_IRQ_BASE; - mask = 1 << gpio; - - gpiointmask &= ~mask; - - /* Disable interrupt with edge detection */ - sysRegMask(AR5315_GPIO_INT, AR5315_GPIO_INT_M | AR5315_GPIO_INT_LVL_M, gpio | AR5315_GPIO_INT_LVL(0)); -} - -/* Turn on the specified AR531X_MISC_IRQ interrupt */ -static unsigned int ar5315_gpio_intr_startup(unsigned int irq) -{ - ar5315_gpio_intr_enable(irq); - return 0; -} - -/* Turn off the specified AR531X_MISC_IRQ interrupt */ -static void -ar5315_gpio_intr_shutdown(unsigned int irq) -{ - ar5315_gpio_intr_disable(irq); -} - -static void -ar5315_gpio_intr_ack(unsigned int irq) -{ - ar5315_gpio_intr_disable(irq); -} - -static void -ar5315_gpio_intr_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - ar5315_gpio_intr_enable(irq); -} - -static struct irq_chip ar5315_gpio_intr_controller = { - .typename = "AR5315 GPIO", - .startup = ar5315_gpio_intr_startup, - .shutdown = ar5315_gpio_intr_shutdown, - .enable = ar5315_gpio_intr_enable, - .disable = ar5315_gpio_intr_disable, - .ack = ar5315_gpio_intr_ack, - .end = ar5315_gpio_intr_end, -}; - - -/* Enable the specified AR531X_MISC_IRQ interrupt */ -static void -ar5315_misc_intr_enable(unsigned int irq) -{ - unsigned int imr; - - imr = sysRegRead(AR5315_IMR); - switch(irq) - { - case AR531X_MISC_IRQ_SPI: - imr |= AR5315_ISR_SPI; - break; - - case AR531X_MISC_IRQ_TIMER: - imr |= AR5315_ISR_TIMER; - break; - - case AR531X_MISC_IRQ_AHB_PROC: - imr |= AR5315_ISR_AHB; - break; - - case AR531X_MISC_IRQ_AHB_DMA: - imr |= 0/* ?? */; - break; - - case AR531X_MISC_IRQ_GPIO: - imr |= AR5315_ISR_GPIO; - break; - - case AR531X_MISC_IRQ_UART0: - imr |= AR5315_ISR_UART0; - break; - - - case AR531X_MISC_IRQ_WATCHDOG: - imr |= AR5315_ISR_WD; - break; - - case AR531X_MISC_IRQ_LOCAL: - imr |= 0/* ?? */; - break; - - } - sysRegWrite(AR5315_IMR, imr); - imr=sysRegRead(AR5315_IMR); /* flush write buffer */ -} - -/* Disable the specified AR531X_MISC_IRQ interrupt */ -static void -ar5315_misc_intr_disable(unsigned int irq) -{ - unsigned int imr; - - imr = sysRegRead(AR5315_IMR); - switch(irq) - { - case AR531X_MISC_IRQ_SPI: - imr &= ~AR5315_ISR_SPI; - break; - - case AR531X_MISC_IRQ_TIMER: - imr &= (~AR5315_ISR_TIMER); - break; - - case AR531X_MISC_IRQ_AHB_PROC: - imr &= (~AR5315_ISR_AHB); - break; - - case AR531X_MISC_IRQ_AHB_DMA: - imr &= 0/* ?? */; - break; - - case AR531X_MISC_IRQ_GPIO: - imr &= ~AR5315_ISR_GPIO; - break; - - case AR531X_MISC_IRQ_UART0: - imr &= (~AR5315_ISR_UART0); - break; - - case AR531X_MISC_IRQ_WATCHDOG: - imr &= (~AR5315_ISR_WD); - break; - - case AR531X_MISC_IRQ_LOCAL: - imr &= ~0/* ?? */; - break; - - } - sysRegWrite(AR5315_IMR, imr); - sysRegRead(AR5315_IMR); /* flush write buffer */ -} - -/* Turn on the specified AR531X_MISC_IRQ interrupt */ -static unsigned int -ar5315_misc_intr_startup(unsigned int irq) -{ - ar5315_misc_intr_enable(irq); - return 0; -} - -/* Turn off the specified AR531X_MISC_IRQ interrupt */ -static void -ar5315_misc_intr_shutdown(unsigned int irq) -{ - ar5315_misc_intr_disable(irq); -} - -static void -ar5315_misc_intr_ack(unsigned int irq) -{ - ar5315_misc_intr_disable(irq); -} - -static void -ar5315_misc_intr_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - ar5315_misc_intr_enable(irq); -} - -static struct irq_chip ar5315_misc_intr_controller = { - .typename = "AR5315 misc", - .startup = ar5315_misc_intr_startup, - .shutdown = ar5315_misc_intr_shutdown, - .enable = ar5315_misc_intr_enable, - .disable = ar5315_misc_intr_disable, - .ack = ar5315_misc_intr_ack, - .end = ar5315_misc_intr_end, -}; - -static irqreturn_t ar5315_ahb_proc_handler(int cpl, void *dev_id) -{ - sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET); - sysRegRead(AR5315_AHB_ERR1); - - printk("AHB fatal error\n"); - machine_restart("AHB error"); /* Catastrophic failure */ - - return IRQ_HANDLED; -} - -static struct irqaction ar5315_ahb_proc_interrupt = { - .handler = ar5315_ahb_proc_handler, - .flags = IRQF_DISABLED, - .name = "ar5315_ahb_proc_interrupt", -}; - - -static struct irqaction cascade = { - .handler = no_action, - .flags = IRQF_DISABLED, - .name = "cascade", -}; - -static void ar5315_gpio_intr_init(int irq_base) -{ - int i; - - for (i = irq_base; i < irq_base + AR531X_GPIO_IRQ_COUNT; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].chip = &ar5315_gpio_intr_controller; - } - setup_irq(AR531X_MISC_IRQ_GPIO, &cascade); - gpiointval = sysRegRead(AR5315_GPIO_DI); -} - -void ar5315_misc_intr_init(int irq_base) -{ - int i; - - for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].chip = &ar5315_misc_intr_controller; - } - setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5315_ahb_proc_interrupt); - setup_irq(AR5315_IRQ_MISC_INTRS, &cascade); - ar5315_gpio_intr_init(AR531X_GPIO_IRQ_BASE); -} - diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/ar531x.h b/target/linux/atheros-2.6/files/arch/mips/atheros/ar531x.h deleted file mode 100644 index 5256a548ce..0000000000 --- a/target/linux/atheros-2.6/files/arch/mips/atheros/ar531x.h +++ /dev/null @@ -1,166 +0,0 @@ -#ifndef __AR531X_H -#define __AR531X_H - -#include <asm/cpu-info.h> -#include <ar531x_platform.h> -#include "ar5312/ar5312.h" -#include "ar5315/ar5315.h" - - -/* - * C access to CLZ instruction - * (count leading zeroes). - */ -static inline int clz(unsigned long val) -{ - int ret; - - __asm__ volatile ( - ".set\tnoreorder\n\t" - ".set\tnoat\n\t" - ".set\tmips32\n\t" - "clz\t%0,%1\n\t" - ".set\tmips0\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (ret) - : "r" (val) - ); - - return ret; -} - -/* - * Atheros CPUs before the AR2315 are using MIPS 4Kc core, later designs are - * using MIPS 4KEc R2 core. This makes it easy to determine the board at runtime. - */ -#ifdef CONFIG_ATHEROS_AR5312 -#define DO_AR5312(...) \ - if (current_cpu_data.cputype != CPU_4KEC) { \ - __VA_ARGS__ \ - } -#else -#define DO_AR5312(...) -#endif -#ifdef CONFIG_ATHEROS_AR5315 -#define DO_AR5315(...) \ - if (current_cpu_data.cputype == CPU_4KEC) { \ - __VA_ARGS__ \ - } -#else -#define DO_AR5315(...) -#endif - -#define AR531X_MISC_IRQ_BASE 0x20 -#define AR531X_GPIO_IRQ_BASE 0x30 - -/* Software's idea of interrupts handled by "CPU Interrupt Controller" */ -#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0 -#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */ - -/* Miscellaneous interrupts, which share IP6 */ -#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0 -#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1 -#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2 -#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3 -#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4 -#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5 -#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6 -#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7 -#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8 -#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9 -#define AR531X_MISC_IRQ_COUNT 10 - -/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */ -#define AR531X_GPIO_IRQ_NONE AR531X_MISC_IRQ_BASE+0 -#define AR531X_GPIO_IRQ(n) AR531X_MISC_IRQ_BASE+(n)+1 -#define AR531X_GPIO_IRQ_COUNT 22 - -#define sysRegRead(phys) \ - (*(volatile u32 *)KSEG1ADDR(phys)) - -#define sysRegWrite(phys, val) \ - ((*(volatile u32 *)KSEG1ADDR(phys)) = (val)) - -/* - * This is board-specific data that is stored in a "fixed" location in flash. - * It is shared across operating systems, so it should not be changed lightly. - * The main reason we need it is in order to extract the ethernet MAC - * address(es). - */ -struct ar531x_boarddata { - u32 magic; /* board data is valid */ -#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */ - u16 cksum; /* checksum (starting with BD_REV 2) */ - u16 rev; /* revision of this struct */ -#define BD_REV 4 - char boardName[64]; /* Name of board */ - u16 major; /* Board major number */ - u16 minor; /* Board minor number */ - u32 config; /* Board configuration */ -#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ -#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ -#define BD_UART1 0x00000004 /* UART1 is stuffed */ -#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ -#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ -#define BD_SYSLED 0x00000020 /* System LED stuffed */ -#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ -#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ -#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ -#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ -#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */ -#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ -#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ -#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ -#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ -#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ -#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ -#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ - u16 resetConfigGpio; /* Reset factory GPIO pin */ - u16 sysLedGpio; /* System LED GPIO pin */ - - u32 cpuFreq; /* CPU core frequency in Hz */ - u32 sysFreq; /* System frequency in Hz */ - u32 cntFreq; /* Calculated C0_COUNT frequency */ - - u8 wlan0Mac[6]; - u8 enet0Mac[6]; - u8 enet1Mac[6]; - - u16 pciId; /* Pseudo PCIID for common code */ - u16 memCap; /* cap bank1 in MB */ - - /* version 3 */ - u8 wlan1Mac[6]; /* (ar5212) */ -}; - -#define BOARD_CONFIG_BUFSZ 0x1000 - -extern char *board_config, *radio_config; -extern void serial_setup(unsigned long mapbase, unsigned int uartclk); -extern int ar531x_find_config(char *flash_limit); - -extern void ar5312_prom_init(void); -extern void ar5312_misc_intr_init(int irq_base); -extern void ar5312_plat_setup(void); -extern asmlinkage void ar5312_irq_dispatch(void); - -extern void ar5315_prom_init(void); -extern void ar5315_misc_intr_init(int irq_base); -extern void ar5315_plat_setup(void); -extern asmlinkage void ar5315_irq_dispatch(void); -extern void ar5315_pci_irq(int irq); -static inline u32 sysRegMask(u32 phys, u32 mask, u32 value) -{ - u32 reg; - - reg = sysRegRead(phys); - reg &= ~mask; - reg |= value & mask; - sysRegWrite(phys, reg); - reg = sysRegRead(phys); /* flush write to the hardware */ - - return reg; -} - -#endif diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/board.c b/target/linux/atheros-2.6/files/arch/mips/atheros/board.c deleted file mode 100644 index 1ea66c0c19..0000000000 --- a/target/linux/atheros-2.6/files/arch/mips/atheros/board.c +++ /dev/null @@ -1,207 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> - */ - -/* - * Platform devices for Atheros SoCs - */ - -#include <linux/autoconf.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/platform_device.h> -#include <linux/kernel.h> -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <asm/bootinfo.h> -#include <asm/irq_cpu.h> -#include <asm/io.h> -#include "ar531x.h" - -char *board_config, *radio_config; - -static u8 *find_board_config(char *flash_limit) -{ - char *addr; - int found = 0; - - for (addr = (char *) (flash_limit - 0x1000); - addr >= (char *) (flash_limit - 0x30000); - addr -= 0x1000) { - - if ( *(int *)addr == 0x35333131) { - /* config magic found */ - found = 1; - break; - } - } - - if (!found) { - printk("WARNING: No board configuration data found!\n"); - addr = NULL; - } - - return addr; -} - -static u8 *find_radio_config(char *flash_limit, char *board_config) -{ - int dataFound; - u32 radio_config; - - /* - * Now find the start of Radio Configuration data, using heuristics: - * Search forward from Board Configuration data by 0x1000 bytes - * at a time until we find non-0xffffffff. - */ - dataFound = 0; - for (radio_config = (u32) board_config + 0x1000; - (radio_config < (u32) flash_limit); - radio_config += 0x1000) { - if (*(int *)radio_config != 0xffffffff) { - dataFound = 1; - break; - } - } - -#ifdef CONFIG_ATHEROS_AR5315 - if (!dataFound) { /* AR2316 relocates radio config to new location */ - for (radio_config = (u32) board_config + 0xf8; - (radio_config < (u32) flash_limit - 0x1000 + 0xf8); - radio_config += 0x1000) { - if (*(int *)radio_config != 0xffffffff) { - dataFound = 1; - break; - } - } - } -#endif - - if (!dataFound) { - printk("Could not find Radio Configuration data\n"); - radio_config = 0; - } - - return (u8 *) radio_config; -} - -int __init ar531x_find_config(char *flash_limit) -{ - unsigned int rcfg_size; - char *bcfg, *rcfg; - - /* Copy the board and radio data to RAM, because with the new - * spiflash driver, accessing the mapped memory directly is no - * longer safe */ - - bcfg = find_board_config(flash_limit); - if (!bcfg) - return -ENODEV; - - board_config = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL); - memcpy(board_config, bcfg, 0x100); - - /* Radio config starts 0x100 bytes after board config, regardless - * of what the physical layout on the flash chip looks like */ - - rcfg = find_radio_config(flash_limit, bcfg); - if (!rcfg) - return -ENODEV; - - radio_config = board_config + 0x100 + ((rcfg - bcfg) & 0xfff); - printk("Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, radio_config - board_config); - rcfg_size = BOARD_CONFIG_BUFSZ - ((rcfg - bcfg) & (BOARD_CONFIG_BUFSZ - 1)); - memcpy(radio_config, rcfg, rcfg_size); - - return 0; -} - -void __init serial_setup(unsigned long mapbase, unsigned int uartclk) -{ - struct uart_port s; - - memset(&s, 0, sizeof(s)); - - s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - s.iotype = UPIO_MEM; - s.irq = AR531X_MISC_IRQ_UART0; - s.regshift = 2; - s.mapbase = mapbase; - s.uartclk = uartclk; - s.membase = (void __iomem *)s.mapbase; - - early_serial_setup(&s); -} - -void __init plat_mem_setup(void) -{ - DO_AR5312(ar5312_plat_setup();) - DO_AR5315(ar5315_plat_setup();) - - /* Disable data watchpoints */ - write_c0_watchlo0(0); -} - -const char *get_system_type(void) -{ - switch (mips_machtype) { -#ifdef CONFIG_ATHEROS_AR5312 - case MACH_ATHEROS_AR5312: - return "Atheros AR5312"; - - case MACH_ATHEROS_AR2312: - return "Atheros AR2312"; - - case MACH_ATHEROS_AR2313: - return "Atheros AR2313"; -#endif -#ifdef CONFIG_ATHEROS_AR5315 - case MACH_ATHEROS_AR2315: - return "Atheros AR2315"; - case MACH_ATHEROS_AR2316: - return "Atheros AR2316"; - case MACH_ATHEROS_AR2317: - return "Atheros AR2317"; - case MACH_ATHEROS_AR2318: - return "Atheros AR2318"; -#endif - } - return "Atheros (unknown)"; -} - -void __init plat_timer_setup(struct irqaction *irq) -{ - unsigned int count; - - /* Usually irq is timer_irqaction (timer_interrupt) */ - setup_irq(AR531X_IRQ_CPU_CLOCK, irq); - - /* to generate the first CPU timer interrupt */ - count = read_c0_count(); - write_c0_compare(count + 1000); -} - -asmlinkage void plat_irq_dispatch(void) -{ - DO_AR5312(ar5312_irq_dispatch();) - DO_AR5315(ar5315_irq_dispatch();) -} - -void __init arch_init_irq(void) -{ - clear_c0_status(ST0_IM); - mips_cpu_irq_init(); - - /* Initialize interrupt controllers */ - DO_AR5312(ar5312_misc_intr_init(AR531X_MISC_IRQ_BASE);) - DO_AR5315(ar5315_misc_intr_init(AR531X_MISC_IRQ_BASE);) -} diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/prom.c b/target/linux/atheros-2.6/files/arch/mips/atheros/prom.c deleted file mode 100644 index 403c931acf..0000000000 --- a/target/linux/atheros-2.6/files/arch/mips/atheros/prom.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright MontaVista Software Inc - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> - */ - -/* - * Prom setup file for ar531x - */ - -#include <linux/init.h> -#include <linux/autoconf.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/bootmem.h> - -#include <asm/bootinfo.h> -#include <asm/addrspace.h> -#include "ar531x.h" - -void __init prom_init(void) -{ - char **argv; - - mips_machgroup = MACH_GROUP_ATHEROS; - mips_machtype = -1; - - DO_AR5312(ar5312_prom_init();) - DO_AR5315(ar5315_prom_init();) -#if 0 - argv = (char **)fw_arg1; - /* RedBoot desired command line is argv[1] */ - strcat(arcs_cmdline, argv[1]); -#endif -} - -void __init prom_free_prom_memory(void) -{ -} diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/reset.c b/target/linux/atheros-2.6/files/arch/mips/atheros/reset.c deleted file mode 100644 index d62c5e1c4e..0000000000 --- a/target/linux/atheros-2.6/files/arch/mips/atheros/reset.c +++ /dev/null @@ -1,108 +0,0 @@ -#include <linux/module.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/kobject.h> -#include <linux/workqueue.h> -#include <linux/skbuff.h> -#include <linux/netlink.h> -#include <net/sock.h> -#include <asm/uaccess.h> -#include "ar531x.h" -#include "ar5315/ar5315.h" - -struct event_t { - struct work_struct wq; - int set; - long int jiffies; -}; - -extern struct sock *uevent_sock; -extern u64 uevent_next_seqnum(void); -static int seen; - -static inline void add_msg(struct sk_buff *skb, char *msg) -{ - char *scratch; - scratch = skb_put(skb, strlen(msg) + 1); - sprintf(scratch, msg); -} - -static void hotplug_button(struct work_struct *wq) -{ - struct sk_buff *skb; - struct event_t *event; - size_t len; - char *scratch, *s; - char buf[128]; - - event = container_of(wq, struct event_t, wq); - if (!uevent_sock) - goto done; - - /* allocate message with the maximum possible size */ - s = event->set ? "pressed" : "released"; - len = strlen(s) + 2; - skb = alloc_skb(len + 2048, GFP_KERNEL); - if (!skb) - goto done; - - /* add header */ - scratch = skb_put(skb, len); - sprintf(scratch, "%s@",s); - - /* copy keys to our continuous event payload buffer */ - add_msg(skb, "HOME=/"); - add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin"); - add_msg(skb, "SUBSYSTEM=button"); - add_msg(skb, "BUTTON=reset"); - add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released")); - sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ); - add_msg(skb, buf); - snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum()); - add_msg(skb, buf); - - NETLINK_CB(skb).dst_group = 1; - netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL); - -done: - kfree(event); -} - -static irqreturn_t button_handler(int irq, void *dev_id) -{ - static int pressed = 0; - struct event_t *event; - u32 gpio = ~0; - - event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC); - if (!event) - return IRQ_NONE; - - pressed = !pressed; - - DO_AR5315(gpio = sysRegRead(AR5315_GPIO_DI);) - gpio &= 1 << (irq - AR531X_GPIO_IRQ_BASE); - - event->set = gpio; - event->jiffies = jiffies; - - INIT_WORK(&event->wq, (void *)(void *)hotplug_button); - schedule_work(&event->wq); - - seen = jiffies; - - return IRQ_HANDLED; -} - -int __init ar531x_init_reset(void) -{ - struct ar531x_boarddata *bcfg; - bcfg = (struct ar531x_boarddata *) board_config; - - seen = jiffies; - request_irq(AR531X_GPIO_IRQ_BASE + bcfg->resetConfigGpio, &button_handler, IRQF_SAMPLE_RANDOM, "ar531x_reset", NULL); - - return 0; -} - -module_init(ar531x_init_reset); |