aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ar71xx')
-rw-r--r--target/linux/ar71xx/base-files/etc/defconfig/wzr-hp-g301nh/network26
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/diag.sh2
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/uci-defaults/wzr-hp-g300nh2
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh2
-rw-r--r--target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c54
-rw-r--r--target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h1
-rw-r--r--target/linux/ar71xx/generic/profiles/buffalo.mk10
-rw-r--r--target/linux/ar71xx/image/Makefile9
9 files changed, 90 insertions, 19 deletions
diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wzr-hp-g301nh/network b/target/linux/ar71xx/base-files/etc/defconfig/wzr-hp-g301nh/network
new file mode 100644
index 0000000000..72a4c881d7
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/defconfig/wzr-hp-g301nh/network
@@ -0,0 +1,26 @@
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option ifname eth0.1
+ option type bridge
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+
+config interface wan
+ option ifname eth1
+ option proto dhcp
+
+config switch
+ option name rtl8366rb
+ option reset 1
+ option enable_vlan 1
+
+config switch_vlan
+ option device rtl8366rb
+ option vlan 1
+ option ports "0 1 2 3 5t"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index d61a78d83e..6cd6043f8f 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -123,7 +123,7 @@ get_status_led() {
wrt160nl)
status_led="wrt160nl:blue:wps"
;;
- wzr-hp-g300nh)
+ wzr-hp-g300nh | wzr-hp-g301nh)
status_led="wzr-hp-g300nh:green:router"
;;
zcn-1523h-2 | zcn-1523h-5)
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/wzr-hp-g300nh b/target/linux/ar71xx/base-files/etc/uci-defaults/wzr-hp-g300nh
index 1308a7bb04..1448e1f9a5 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/wzr-hp-g300nh
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/wzr-hp-g300nh
@@ -32,6 +32,6 @@ commit system
EOF
}
-if [ "${board}" == "wzr-hp-g300nh" ]; then
+if [ "${board}" == "wzr-hp-g300nh" || "${board}" == "wzr-hp-g301nh" ]; then
wzrhpg300nh_set_leds
fi
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 15f3250e80..25915616fd 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -148,6 +148,9 @@ ar71xx_board_name() {
*WZR-HP-G300NH)
name="wzr-hp-g300nh"
;;
+ *WZR-HP-G301NH)
+ name="wzr-hp-g301nh"
+ ;;
*ZCN-1523H-2)
name="zcn-1523h-2"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index f0fdd88378..4ccacf4ef1 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -69,7 +69,7 @@ platform_check_image() {
[ "$ARGC" -gt 1 ] && return 1
case "$board" in
- ap81 | ap83 | dir-600-a1 | dir-615-c1 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt400n | bullet-m | nanostation-m | rocket-m | wzr-hp-g300nh | nbg460n_550n_550nh | unifi )
+ ap81 | ap83 | dir-600-a1 | dir-615-c1 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt400n | bullet-m | nanostation-m | rocket-m | wzr-hp-g300nh | wzr-hp-g301nh | nbg460n_550n_550nh | unifi )
[ "$magic" != "2705" ] && {
echo "Invalid image type."
return 1
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c
index 383d87b5f4..2806f3bf28 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c
@@ -13,6 +13,7 @@
#include <linux/mtd/partitions.h>
#include <linux/nxp_74hc153.h>
#include <linux/rtl8366s.h>
+#include <linux/rtl8366rb.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
@@ -225,21 +226,43 @@ static struct platform_device wzrhpg300nh_rtl8366s_device = {
}
};
-static void __init wzrhpg300nh_setup(void)
+static struct rtl8366rb_platform_data wzrhpg301nh_rtl8366rb_data = {
+ .gpio_sda = WZRHPG300NH_GPIO_RTL8366_SDA,
+ .gpio_sck = WZRHPG300NH_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device wzrhpg301nh_rtl8366rb_device = {
+ .name = RTL8366RB_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &wzrhpg301nh_rtl8366rb_data,
+ }
+};
+
+static void __init wzrhpg30xnh_setup(bool hasrtl8366rb)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET;
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
- ar71xx_eth0_pll_data.pll_1000 = 0x1e000100;
- ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
+
+ if (hasrtl8366rb) {
+ ar71xx_eth0_pll_data.pll_1000 = 0x1f000000;
+ ar71xx_eth0_data.mii_bus_dev = &wzrhpg301nh_rtl8366rb_device.dev;
+ ar71xx_eth1_pll_data.pll_1000 = 0x100;
+ ar71xx_eth1_data.mii_bus_dev = &wzrhpg301nh_rtl8366rb_device.dev;
+ } else {
+ ar71xx_eth0_pll_data.pll_1000 = 0x1e000100;
+ ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
+ ar71xx_eth1_pll_data.pll_1000 = 0x1e000100;
+ ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
+ }
+
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
- ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
- ar71xx_eth1_pll_data.pll_1000 = 0x1e000100;
- ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = 0x10;
@@ -251,7 +274,11 @@ static void __init wzrhpg300nh_setup(void)
platform_device_register(&wzrhpg300nh_74hc153_device);
platform_device_register(&wzrhpg300nh_flash_device);
- platform_device_register(&wzrhpg300nh_rtl8366s_device);
+
+ if (hasrtl8366rb)
+ platform_device_register(&wzrhpg301nh_rtl8366rb_device);
+ else
+ platform_device_register(&wzrhpg300nh_rtl8366s_device);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio),
wzrhpg300nh_leds_gpio);
@@ -262,5 +289,18 @@ static void __init wzrhpg300nh_setup(void)
}
+static void __init wzrhpg300nh_setup(void)
+{
+ wzrhpg30xnh_setup(false);
+}
+
+static void __init wzrhpg301nh_setup(void)
+{
+ wzrhpg30xnh_setup(true);
+}
+
MIPS_MACHINE(AR71XX_MACH_WZR_HP_G300NH, "WZR-HP-G300NH",
"Buffalo WZR-HP-G300NH", wzrhpg300nh_setup);
+
+MIPS_MACHINE(AR71XX_MACH_WZR_HP_G301NH, "WZR-HP-G301NH",
+ "Buffalo WZR-HP-G301NH", wzrhpg301nh_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
index e7e57956b2..4b2a08ca6f 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
@@ -61,6 +61,7 @@ enum ar71xx_mach_type {
AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */
AR71XX_MACH_WRT400N, /* Linksys WRT400N */
AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
+ AR71XX_MACH_WZR_HP_G301NH, /* Buffalo WZR-HP-G301NH */
AR71XX_MACH_EAP7660D, /* Senao EAP7660D */
AR71XX_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
AR71XX_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */
diff --git a/target/linux/ar71xx/generic/profiles/buffalo.mk b/target/linux/ar71xx/generic/profiles/buffalo.mk
index 35c7cc34b6..59ddd86cb3 100644
--- a/target/linux/ar71xx/generic/profiles/buffalo.mk
+++ b/target/linux/ar71xx/generic/profiles/buffalo.mk
@@ -5,13 +5,13 @@
# See /LICENSE for more information.
#
-define Profile/WZRHPG300NH
- NAME:=Buffalo WZR-HP-G300NH
+define Profile/WZRHPG30XNH
+ NAME:=Buffalo WZR-HP-G30XNH
PACKAGES:=kmod-ath9k wpad-mini kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
endef
-define Profile/WZRHPG300NH/Description
- Package set optimized for the Buffalo WZR-HP-G300NH
+define Profile/WZRHPG30XNH/Description
+ Package set optimized for the Buffalo WZR-HP-G300NH and WZR-HP-G301NH
endef
-$(eval $(call Profile,WZRHPG300NH))
+$(eval $(call Profile,WZRHPG30XNH))
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index ca5e280428..e7d2f0efa2 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -118,7 +118,7 @@ define Image/Build/DIR825B1
fi; fi
endef
-define Image/Build/WZRHPG300NH
+define Image/Build/WZRHPG30XNH
$(call PatchKernelLzma,$(2),$(3))
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt 1048576 ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
@@ -688,8 +688,9 @@ define Image/Build/Profile/WRT160NL
$(call Image/Build/Template/$(fs_64k)/$(1),CyberTAN,wrt160nl,board=WRT160NL,1.00.01)
endef
-define Image/Build/Profile/WZRHPG300NH
- $(call Image/Build/Template/$(fs_128k)/$(1),WZRHPG300NH,wzr-hp-g300nh,board=WZR-HP-G300NH)
+define Image/Build/Profile/WZRHPG30XNH
+ $(call Image/Build/Template/$(fs_128k)/$(1),WZRHPG30XNH,wzr-hp-g300nh,board=WZR-HP-G300NH)
+ $(call Image/Build/Template/$(fs_128k)/$(1),WZRHPG30XNH,wzr-hp-g301nh,board=WZR-HP-G301NH)
endef
define Image/Build/Profile/ZCN1523H28
@@ -740,7 +741,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/AP96,$(1))
$(call Image/Build/Profile/WRT400N,$(1))
$(call Image/Build/Profile/WRT160NL,$(1))
- $(call Image/Build/Profile/WZRHPG300NH,$(1))
+ $(call Image/Build/Profile/WZRHPG30XNH,$(1))
$(call Image/Build/Profile/ZCN1523H28,$(1))
$(call Image/Build/Profile/ZCN1523H516,$(1))
endef