aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--docs/network.tex23
1 files changed, 22 insertions, 1 deletions
diff --git a/docs/network.tex b/docs/network.tex
index 5516bd9a30..cf1200dcd4 100644
--- a/docs/network.tex
+++ b/docs/network.tex
@@ -107,7 +107,7 @@ The name for the route section is optional, the \texttt{interface}, \texttt{targ
\texttt{gateway} options are mandatory.
Leaving out the \texttt{netmask} option will turn the route into a host route.
-\subsubsection{Setting up the switch (currently broadcom only)}
+\subsubsection{Setting up the switch (broadcom only)}
The switch configuration is set by adding a \texttt{'switch'} config section.
Example:
@@ -152,6 +152,27 @@ Three interfaces will be automatically created using this switch layout :
You can then assign those interfaces to a custom network configuration name
like \texttt{lan}, \texttt{wan} or \texttt{dmz} for instance.
+\subsubsection{Setting up the switch (swconfig)}
+
+\emph{swconfig} based configurations have a different structure with one extra
+section per vlan. The example below shows a typical configuration:
+
+\begin{Verbatim}
+config 'switch' 'eth0'
+ option 'reset' '1'
+ option 'enable_vlan' '1'
+
+config 'switch_vlan' 'eth0_1'
+ option 'device' 'eth0'
+ option 'vlan' '1'
+ option 'ports' '0 1 2 3 5t'
+
+config 'switch_vlan' 'eth0_2'
+ option 'device' 'eth0'
+ option 'vlan' '2'
+ option 'ports' '4 5t'
+\end{Verbatim}
+
\subsubsection{Setting up IPv6 connectivity}
OpenWrt supports IPv6 connectivity using PPP, Tunnel brokers or static