aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ar7/config-2.6.30140
-rw-r--r--target/linux/ar7/files-2.6.30/arch/mips/ar7/Makefile10
-rw-r--r--target/linux/ar7/files-2.6.30/arch/mips/ar7/clock.c483
-rw-r--r--target/linux/ar7/files-2.6.30/arch/mips/ar7/gpio.c49
-rw-r--r--target/linux/ar7/files-2.6.30/arch/mips/ar7/irq.c183
-rw-r--r--target/linux/ar7/files-2.6.30/arch/mips/ar7/memory.c74
-rw-r--r--target/linux/ar7/files-2.6.30/arch/mips/ar7/platform.c535
-rw-r--r--target/linux/ar7/files-2.6.30/arch/mips/ar7/prom.c321
-rw-r--r--target/linux/ar7/files-2.6.30/arch/mips/ar7/setup.c119
-rw-r--r--target/linux/ar7/files-2.6.30/arch/mips/ar7/time.c28
l---------target/linux/ar7/files-2.6.30/arch/mips/include/asm/ar71
-rw-r--r--target/linux/ar7/files-2.6.30/drivers/char/ar7_gpio.c158
-rw-r--r--target/linux/ar7/files-2.6.30/drivers/char/watchdog/ar7_wdt.c349
-rw-r--r--target/linux/ar7/files-2.6.30/drivers/vlynq/Kconfig13
-rw-r--r--target/linux/ar7/files-2.6.30/drivers/vlynq/Makefile5
-rw-r--r--target/linux/ar7/files-2.6.30/drivers/vlynq/vlynq.c783
-rw-r--r--target/linux/ar7/files-2.6.30/include/asm-mips/ar7/ar7.h200
-rw-r--r--target/linux/ar7/files-2.6.30/include/asm-mips/ar7/gpio.h269
-rw-r--r--target/linux/ar7/files-2.6.30/include/asm-mips/ar7/irq.h16
-rw-r--r--target/linux/ar7/files-2.6.30/include/asm-mips/ar7/prom.h26
-rw-r--r--target/linux/ar7/files-2.6.30/include/asm-mips/ar7/spaces.h32
-rw-r--r--target/linux/ar7/files-2.6.30/include/asm-mips/ar7/titan.h178
-rw-r--r--target/linux/ar7/files-2.6.30/include/asm-mips/ar7/war.h25
-rw-r--r--target/linux/ar7/files-2.6.30/include/linux/vlynq.h161
-rw-r--r--target/linux/ar7/patches-2.6.30/100-board_support.patch86
-rw-r--r--target/linux/ar7/patches-2.6.30/110-flash.patch11
-rw-r--r--target/linux/ar7/patches-2.6.30/120-gpio_chrdev.patch28
-rw-r--r--target/linux/ar7/patches-2.6.30/130-vlynq.patch21
-rw-r--r--target/linux/ar7/patches-2.6.30/131-vlynq_fixes.patch548
-rw-r--r--target/linux/ar7/patches-2.6.30/140-watchdog_bootcr.patch31
-rw-r--r--target/linux/ar7/patches-2.6.30/150-cpmac_not_broken.patch11
-rw-r--r--target/linux/ar7/patches-2.6.30/160-cpmac_up_and_running.patch47
-rw-r--r--target/linux/ar7/patches-2.6.30/500-serial_kludge.patch38
-rw-r--r--target/linux/ar7/patches-2.6.30/900-cpmac_multiqueue.patch70
-rw-r--r--target/linux/ar7/patches-2.6.30/910-cpmac_fixed_phy.patch90
-rw-r--r--target/linux/ar7/patches-2.6.30/930-titan-platform.patch248
-rw-r--r--target/linux/ar7/patches-2.6.30/940-cpmac-titan.patch76
-rw-r--r--target/linux/ar7/patches-2.6.30/950-cpmac_allow_vlan.patch11
38 files changed, 0 insertions, 5474 deletions
diff --git a/target/linux/ar7/config-2.6.30 b/target/linux/ar7/config-2.6.30
deleted file mode 100644
index 4f1eee44f8..0000000000
--- a/target/linux/ar7/config-2.6.30
+++ /dev/null
@@ -1,140 +0,0 @@
-
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_AR7_GPIO=y
-CONFIG_AR7_WDT=y
-CONFIG_AR7=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BINARY_PRINTF is not set
-CONFIG_BITREVERSE=y
-CONFIG_BOOT_ELF32=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CEVT_R4K=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CPMAC=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_CSRC_R4K=y
-CONFIG_DECOMPRESS_LZMA=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_RANDOM=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MIPS=y
-CONFIG_MTD_AR7_PARTS=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NO_EXCEPT_FILL=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-CONFIG_VLYNQ=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ar7/files-2.6.30/arch/mips/ar7/Makefile b/target/linux/ar7/files-2.6.30/arch/mips/ar7/Makefile
deleted file mode 100644
index 7435e44b39..0000000000
--- a/target/linux/ar7/files-2.6.30/arch/mips/ar7/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-
-obj-y := \
- prom.o \
- setup.o \
- memory.o \
- irq.o \
- time.o \
- platform.o \
- gpio.o \
- clock.o
diff --git a/target/linux/ar7/files-2.6.30/arch/mips/ar7/clock.c b/target/linux/ar7/files-2.6.30/arch/mips/ar7/clock.c
deleted file mode 100644
index 25e6b7326c..0000000000
--- a/target/linux/ar7/files-2.6.30/arch/mips/ar7/clock.c
+++ /dev/null
@@ -1,483 +0,0 @@
-/*
- * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/ar7/ar7.h>
-
-#define BOOT_PLL_SOURCE_MASK 0x3
-#define CPU_PLL_SOURCE_SHIFT 16
-#define BUS_PLL_SOURCE_SHIFT 14
-#define USB_PLL_SOURCE_SHIFT 18
-#define DSP_PLL_SOURCE_SHIFT 22
-#define BOOT_PLL_SOURCE_AFE 0
-#define BOOT_PLL_SOURCE_BUS 0
-#define BOOT_PLL_SOURCE_REF 1
-#define BOOT_PLL_SOURCE_XTAL 2
-#define BOOT_PLL_SOURCE_CPU 3
-#define BOOT_PLL_BYPASS 0x00000020
-#define BOOT_PLL_ASYNC_MODE 0x02000000
-#define BOOT_PLL_2TO1_MODE 0x00008000
-
-#define TNETD7200_CLOCK_ID_CPU 0
-#define TNETD7200_CLOCK_ID_DSP 1
-#define TNETD7200_CLOCK_ID_USB 2
-
-#define TNETD7200_DEF_CPU_CLK 211000000
-#define TNETD7200_DEF_DSP_CLK 125000000
-#define TNETD7200_DEF_USB_CLK 48000000
-
-struct tnetd7300_clock {
- u32 ctrl;
-#define PREDIV_MASK 0x001f0000
-#define PREDIV_SHIFT 16
-#define POSTDIV_MASK 0x0000001f
- u32 unused1[3];
- u32 pll;
-#define MUL_MASK 0x0000f000
-#define MUL_SHIFT 12
-#define PLL_MODE_MASK 0x00000001
-#define PLL_NDIV 0x00000800
-#define PLL_DIV 0x00000002
-#define PLL_STATUS 0x00000001
- u32 unused2[3];
-};
-
-struct tnetd7300_clocks {
- struct tnetd7300_clock bus;
- struct tnetd7300_clock cpu;
- struct tnetd7300_clock usb;
- struct tnetd7300_clock dsp;
-};
-
-struct tnetd7200_clock {
- u32 ctrl;
- u32 unused1[3];
-#define DIVISOR_ENABLE_MASK 0x00008000
- u32 mul;
- u32 prediv;
- u32 postdiv;
- u32 postdiv2;
- u32 unused2[6];
- u32 cmd;
- u32 status;
- u32 cmden;
- u32 padding[15];
-};
-
-struct tnetd7200_clocks {
- struct tnetd7200_clock cpu;
- struct tnetd7200_clock dsp;
- struct tnetd7200_clock usb;
-};
-
-int ar7_cpu_clock = 150000000;
-EXPORT_SYMBOL(ar7_cpu_clock);
-int ar7_bus_clock = 125000000;
-EXPORT_SYMBOL(ar7_bus_clock);
-int ar7_dsp_clock;
-EXPORT_SYMBOL(ar7_dsp_clock);
-
-static int gcd(int a, int b)
-{
- int c;
-
- if (a < b) {
- c = a;
- a = b;
- b = c;
- }
- while ((c = (a % b))) {
- a = b;
- b = c;
- }
- return b;
-}
-
-static void approximate(int base, int target, int *prediv,
- int *postdiv, int *mul)
-{
- int i, j, k, freq, res = target;
- for (i = 1; i <= 16; i++)
- for (j = 1; j <= 32; j++)
- for (k = 1; k <= 32; k++) {
- freq = abs(base / j * i / k - target);
- if (freq < res) {
- res = freq;
- *mul = i;
- *prediv = j;
- *postdiv = k;
- }
- }
-}
-
-static void calculate(int base, int target, int *prediv, int *postdiv,
- int *mul)
-{
- int tmp_gcd, tmp_base, tmp_freq;
-
- for (*prediv = 1; *prediv <= 32; (*prediv)++) {
- tmp_base = base / *prediv;
- tmp_gcd = gcd(target, tmp_base);
- *mul = target / tmp_gcd;
- *postdiv = tmp_base / tmp_gcd;
- if ((*mul < 1) || (*mul >= 16))
- continue;
- if ((*postdiv > 0) & (*postdiv <= 32))
- break;
- }
-
- if (base / (*prediv) * (*mul) / (*postdiv) != target) {
- approximate(base, target, prediv, postdiv, mul);
- tmp_freq = base / (*prediv) * (*mul) / (*postdiv);
- printk(KERN_WARNING
- "Adjusted requested frequency %d to %d\n",
- target, tmp_freq);
- }
-
- printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n",
- *prediv, *postdiv, *mul);
-}
-
-static int tnetd7300_dsp_clock(void)
-{
- u32 didr1, didr2;
- u8 rev = ar7_chip_rev();
- didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18));
- didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c));
- if (didr2 & (1 << 23))
- return 0;
- if ((rev >= 0x23) && (rev != 0x57))
- return 250000000;
- if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22))
- > 4208000)
- return 250000000;
- return 0;
-}
-
-static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock,
- u32 *bootcr, u32 bus_clock)
-{
- int product;
- int base_clock = AR7_REF_CLOCK;
- u32 ctrl = readl(&clock->ctrl);
- u32 pll = readl(&clock->pll);
- int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1;
- int postdiv = (ctrl & POSTDIV_MASK) + 1;
- int divisor = prediv * postdiv;
- int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1;
-
- switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
- case BOOT_PLL_SOURCE_BUS:
- base_clock = bus_clock;
- break;
- case BOOT_PLL_SOURCE_REF:
- base_clock = AR7_REF_CLOCK;
- break;
- case BOOT_PLL_SOURCE_XTAL:
- base_clock = AR7_XTAL_CLOCK;
- break;
- case BOOT_PLL_SOURCE_CPU:
- base_clock = ar7_cpu_clock;
- break;
- }
-
- if (*bootcr & BOOT_PLL_BYPASS)
- return base_clock / divisor;
-
- if ((pll & PLL_MODE_MASK) == 0)
- return (base_clock >> (mul / 16 + 1)) / divisor;
-
- if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) {
- product = (mul & 1) ?
- (base_clock * mul) >> 1 :
- (base_clock * (mul - 1)) >> 2;
- return product / divisor;
- }
-
- if (mul == 16)
- return base_clock / divisor;
-
- return base_clock * mul / divisor;
-}
-
-static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
- u32 *bootcr, u32 frequency)
-{
- int prediv, postdiv, mul;
- int base_clock = ar7_bus_clock;
-
- switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
- case BOOT_PLL_SOURCE_BUS:
- base_clock = ar7_bus_clock;
- break;
- case BOOT_PLL_SOURCE_REF:
- base_clock = AR7_REF_CLOCK;
- break;
- case BOOT_PLL_SOURCE_XTAL:
- base_clock = AR7_XTAL_CLOCK;
- break;
- case BOOT_PLL_SOURCE_CPU:
- base_clock = ar7_cpu_clock;
- break;
- }
-
- calculate(base_clock, frequency, &prediv, &postdiv, &mul);
-
- writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
- mdelay(1);
- writel(4, &clock->pll);
- while (readl(&clock->pll) & PLL_STATUS);
- writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
- mdelay(75);
-}
-
-static void __init tnetd7300_init_clocks(void)
-{
- u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
- struct tnetd7300_clocks *clocks =
- (struct tnetd7300_clocks *)
- ioremap_nocache(AR7_REGS_POWER + 0x20,
- sizeof(struct tnetd7300_clocks));
-
- ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
- &clocks->bus, bootcr, AR7_AFE_CLOCK);
-
- if (*bootcr & BOOT_PLL_ASYNC_MODE)
- ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
- &clocks->cpu, bootcr, AR7_AFE_CLOCK);
- else
- ar7_cpu_clock = ar7_bus_clock;
-/*
- tnetd7300_set_clock(USB_PLL_SOURCE_SHIFT, &clocks->usb,
- bootcr, 48000000);
-*/
- if (ar7_dsp_clock == 250000000)
- tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp,
- bootcr, ar7_dsp_clock);
-
- iounmap(clocks);
- iounmap(bootcr);
-}
-
-static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock,
- u32 *bootcr, u32 bus_clock)
-{
- int divisor = ((readl(&clock->prediv) & 0x1f) + 1) *
- ((readl(&clock->postdiv) & 0x1f) + 1);
-
- if (*bootcr & BOOT_PLL_BYPASS)
- return base / divisor;
-
- return base * ((readl(&clock->mul) & 0xf) + 1) / divisor;
-}
-
-
-static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock,
- int prediv, int postdiv, int postdiv2, int mul, u32 frequency)
-{
- printk(KERN_INFO
- "Clocks: base = %d, frequency = %u, prediv = %d, "
- "postdiv = %d, postdiv2 = %d, mul = %d\n",
- base, frequency, prediv, postdiv, postdiv2, mul);
-
- writel(0, &clock->ctrl);
- writel(DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F), &clock->prediv);
- writel((mul - 1) & 0xF, &clock->mul);
-
- for (mul = 0; mul < 2000; mul++) /* nop */;
-
- while (readl(&clock->status) & 0x1) /* nop */;
-
- writel(DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F), &clock->postdiv);
-
- writel(readl(&clock->cmden) | 1, &clock->cmden);
- writel(readl(&clock->cmd) | 1, &clock->cmd);
-
- while (readl(&clock->status) & 0x1) /* nop */;
-
- writel(DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F), &clock->postdiv2);
-
- writel(readl(&clock->cmden) | 1, &clock->cmden);
- writel(readl(&clock->cmd) | 1, &clock->cmd);
-
- while (readl(&clock->status) & 0x1) /* nop */;
-
- writel(readl(&clock->ctrl) | 1, &clock->ctrl);
-}
-
-static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr)
-{
- if (*bootcr & BOOT_PLL_ASYNC_MODE)
- /* Async */
- switch (clock_id) {
- case TNETD7200_CLOCK_ID_DSP:
- return AR7_REF_CLOCK;
- default:
- return AR7_AFE_CLOCK;
- }
- else
- /* Sync */
- if (*bootcr & BOOT_PLL_2TO1_MODE)
- /* 2:1 */
- switch (clock_id) {
- case TNETD7200_CLOCK_ID_DSP:
- return AR7_REF_CLOCK;
- default:
- return AR7_AFE_CLOCK;
- }
- else
- /* 1:1 */
- return AR7_REF_CLOCK;
-}
-
-
-static void __init tnetd7200_init_clocks(void)
-{
- u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
- struct tnetd7200_clocks *clocks =
- (struct tnetd7200_clocks *)
- ioremap_nocache(AR7_REGS_POWER + 0x80,
- sizeof(struct tnetd7200_clocks));
- int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv;
- int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv;
- int usb_base, usb_mul, usb_prediv, usb_postdiv;
-
-/*
- Log from Fritz!Box 7170 Annex B:
-
- CPU revision is: 00018448
- Clocks: Async mode
- Clocks: Setting DSP clock
- Clocks: prediv: 1, postdiv: 1, mul: 5
- Clocks: base = 25000000, frequency = 125000000, prediv = 1,
- postdiv = 2, postdiv2 = 1, mul = 10
- Clocks: Setting CPU clock
- Adjusted requested frequency 211000000 to 211968000
- Clocks: prediv: 1, postdiv: 1, mul: 6
- Clocks: base = 35328000, frequency = 211968000, prediv = 1,
- postdiv = 1, postdiv2 = -1, mul = 6
- Clocks: Setting USB clock
- Adjusted requested frequency 48000000 to 48076920
- Clocks: prediv: 13, postdiv: 1, mul: 5
- Clocks: base = 125000000, frequency = 48000000, prediv = 13,
- postdiv = 1, postdiv2 = -1, mul = 5
-
- DSL didn't work if you didn't set the postdiv 2:1 postdiv2 combination,
- driver hung on startup.
- Haven't tested this on a synchronous board,
- neither do i know what to do with ar7_dsp_clock
-*/
-
- cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr);
- dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr);
-
- if (*bootcr & BOOT_PLL_ASYNC_MODE) {
- printk(KERN_INFO "Clocks: Async mode\n");
-
- printk(KERN_INFO "Clocks: Setting DSP clock\n");
- calculate(dsp_base, TNETD7200_DEF_DSP_CLK,
- &dsp_prediv, &dsp_postdiv, &dsp_mul);
- ar7_bus_clock =
- ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv;
- tnetd7200_set_clock(dsp_base, &clocks->dsp,
- dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
- ar7_bus_clock);
-
- printk(KERN_INFO "Clocks: Setting CPU clock\n");
- calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
- &cpu_postdiv, &cpu_mul);
- ar7_cpu_clock =
- ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv;
- tnetd7200_set_clock(cpu_base, &clocks->cpu,
- cpu_prediv, cpu_postdiv, -1, cpu_mul,
- ar7_cpu_clock);
-
- } else
- if (*bootcr & BOOT_PLL_2TO1_MODE) {
- printk(KERN_INFO "Clocks: Sync 2:1 mode\n");
-
- printk(KERN_INFO "Clocks: Setting CPU clock\n");
- calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
- &cpu_postdiv, &cpu_mul);
- ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul)
- / cpu_postdiv;
- tnetd7200_set_clock(cpu_base, &clocks->cpu,
- cpu_prediv, cpu_postdiv, -1, cpu_mul,
- ar7_cpu_clock);
-
- printk(KERN_INFO "Clocks: Setting DSP clock\n");
- calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
- &dsp_postdiv, &dsp_mul);
- ar7_bus_clock = ar7_cpu_clock / 2;
- tnetd7200_set_clock(dsp_base, &clocks->dsp,
- dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
- dsp_mul * 2, ar7_bus_clock);
- } else {
- printk(KERN_INFO "Clocks: Sync 1:1 mode\n");
-
- printk(KERN_INFO "Clocks: Setting DSP clock\n");
- calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
- &dsp_postdiv, &dsp_mul);
- ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul)
- / dsp_postdiv;
- tnetd7200_set_clock(dsp_base, &clocks->dsp,
- dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
- dsp_mul * 2, ar7_bus_clock);
-
- ar7_cpu_clock = ar7_bus_clock;
- }
-
- printk(KERN_INFO "Clocks: Setting USB clock\n");
- usb_base = ar7_bus_clock;
- calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv,
- &usb_postdiv, &usb_mul);
- tnetd7200_set_clock(usb_base, &clocks->usb,
- usb_prediv, usb_postdiv, -1, usb_mul,
- TNETD7200_DEF_USB_CLK);
-
- #warning FIXME
- ar7_dsp_clock = ar7_cpu_clock;
-
- iounmap(clocks);
- iounmap(bootcr);
-}
-
-void __init ar7_init_clocks(void)
-{
- switch (ar7_chip_id()) {
- case AR7_CHIP_7100:
-#warning FIXME: Check if the new 7200 clock init works for 7100
- tnetd7200_init_clocks();
- break;
- case AR7_CHIP_7200:
- tnetd7200_init_clocks();
- break;
- case AR7_CHIP_7300:
- ar7_dsp_clock = tnetd7300_dsp_clock();
- tnetd7300_init_clocks();
- break;
- default:
- break;
- }
-}
diff --git a/target/linux/ar7/files-2.6.30/arch/mips/ar7/gpio.c b/target/linux/ar7/files-2.6.30/arch/mips/ar7/gpio.c
deleted file mode 100644
index 56860f46d5..0000000000
--- a/target/linux/ar7/files-2.6.30/arch/mips/ar7/gpio.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/module.h>
-
-#include <asm/ar7/gpio.h>
-
-static const char *ar7_gpio_list[TITAN_GPIO_MAX];
-
-int gpio_request(unsigned gpio, const char *label)
-{
- if (gpio >= (ar7_is_titan() ? TITAN_GPIO_MAX : AR7_GPIO_MAX))
- return -EINVAL;
-
- if (ar7_gpio_list[gpio])
- return -EBUSY;
-
- if (label) {
- ar7_gpio_list[gpio] = label;
- } else {
- ar7_gpio_list[gpio] = "busy";
- }
-
- return 0;
-}
-EXPORT_SYMBOL(gpio_request);
-
-void gpio_free(unsigned gpio)
-{
- BUG_ON(!ar7_gpio_list[gpio]);
- ar7_gpio_list[gpio] = NULL;
-}
-EXPORT_SYMBOL(gpio_free);
diff --git a/target/linux/ar7/files-2.6.30/arch/mips/ar7/irq.c b/target/linux/ar7/files-2.6.30/arch/mips/ar7/irq.c
deleted file mode 100644
index 6bb183641d..0000000000
--- a/target/linux/ar7/files-2.6.30/arch/mips/ar7/irq.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/ar7/ar7.h>
-
-#define EXCEPT_OFFSET 0x80
-#define PACE_OFFSET 0xA0
-#define CHNLS_OFFSET 0x200
-
-#define REG_OFFSET(irq, reg) ((irq) / 32 * 0x4 + reg * 0x10)
-#define SEC_REG_OFFSET(reg) (EXCEPT_OFFSET + reg * 0x8)
-#define SEC_SR_OFFSET (SEC_REG_OFFSET(0)) /* 0x80 */
-#define CR_OFFSET(irq) (REG_OFFSET(irq, 1)) /* 0x10 */
-#define SEC_CR_OFFSET (SEC_REG_OFFSET(1)) /* 0x88 */
-#define ESR_OFFSET(irq) (REG_OFFSET(irq, 2)) /* 0x20 */
-#define SEC_ESR_OFFSET (SEC_REG_OFFSET(2)) /* 0x90 */
-#define ECR_OFFSET(irq) (REG_OFFSET(irq, 3)) /* 0x30 */
-#define SEC_ECR_OFFSET (SEC_REG_OFFSET(3)) /* 0x98 */
-#define PIR_OFFSET (0x40)
-#define MSR_OFFSET (0x44)
-#define PM_OFFSET(irq) (REG_OFFSET(irq, 5)) /* 0x50 */
-#define TM_OFFSET(irq) (REG_OFFSET(irq, 6)) /* 0x60 */
-
-#define REG(addr) ((u32 *)(KSEG1ADDR(AR7_REGS_IRQ) + addr))
-
-#define CHNL_OFFSET(chnl) (CHNLS_OFFSET + (chnl * 4))
-
-static void ar7_unmask_irq(unsigned int irq_nr);
-static void ar7_mask_irq(unsigned int irq_nr);
-static void ar7_ack_irq(unsigned int irq_nr);
-static void ar7_unmask_sec_irq(unsigned int irq_nr);
-static void ar7_mask_sec_irq(unsigned int irq_nr);
-static void ar7_ack_sec_irq(unsigned int irq_nr);
-static void ar7_cascade(void);
-static void ar7_irq_init(int base);
-static int ar7_irq_base;
-
-static struct irq_chip ar7_irq_type = {
- .name = "AR7",
- .unmask = ar7_unmask_irq,
- .mask = ar7_mask_irq,
- .ack = ar7_ack_irq
-};
-
-static struct irq_chip ar7_sec_irq_type = {
- .name = "AR7",
- .unmask = ar7_unmask_sec_irq,
- .mask = ar7_mask_sec_irq,
- .ack = ar7_ack_sec_irq,
-};
-
-static struct irqaction ar7_cascade_action = {
- .handler = no_action,
- .name = "AR7 cascade interrupt"
-};
-
-static void ar7_unmask_irq(unsigned int irq)
-{
- writel(1 << ((irq - ar7_irq_base) % 32),
- REG(ESR_OFFSET(irq - ar7_irq_base)));
-}
-
-static void ar7_mask_irq(unsigned int irq)
-{
- writel(1 << ((irq - ar7_irq_base) % 32),
- REG(ECR_OFFSET(irq - ar7_irq_base)));
-}
-
-static void ar7_ack_irq(unsigned int irq)
-{
- writel(1 << ((irq - ar7_irq_base) % 32),
- REG(CR_OFFSET(irq - ar7_irq_base)));
-}
-
-static void ar7_unmask_sec_irq(unsigned int irq)
-{
- writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ESR_OFFSET));
-}
-
-static void ar7_mask_sec_irq(unsigned int irq)
-{
- writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ECR_OFFSET));
-}
-
-static void ar7_ack_sec_irq(unsigned int irq)
-{
- writel(1 << (irq - ar7_irq_base - 40), REG(SEC_CR_OFFSET));
-}
-
-void __init arch_init_irq(void) {
- mips_cpu_irq_init();
- ar7_irq_init(8);
-}
-
-static void __init ar7_irq_init(int base)
-{
- int i;
- /*
- * Disable interrupts and clear pending
- */
- writel(0xffffffff, REG(ECR_OFFSET(0)));
- writel(0xff, REG(ECR_OFFSET(32)));
- writel(0xffffffff, REG(SEC_ECR_OFFSET));
- writel(0xffffffff, REG(CR_OFFSET(0)));
- writel(0xff, REG(CR_OFFSET(32)));
- writel(0xffffffff, REG(SEC_CR_OFFSET));
-
- ar7_irq_base = base;
-
- for (i = 0; i < 40; i++) {
- writel(i, REG(CHNL_OFFSET(i)));
- /* Primary IRQ's */
- set_irq_chip_and_handler(base + i, &ar7_irq_type,
- handle_level_irq);
- /* Secondary IRQ's */
- if (i < 32)
- set_irq_chip_and_handler(base + i + 40,
- &ar7_sec_irq_type,
- handle_level_irq);
- }
-
- setup_irq(2, &ar7_cascade_action);
- setup_irq(ar7_irq_base, &ar7_cascade_action);
- set_c0_status(IE_IRQ0);
-}
-
-static void ar7_cascade(void)
-{
- u32 status;
- int i, irq;
-
- /* Primary IRQ's */
- irq = readl(REG(PIR_OFFSET)) & 0x3f;
- if (irq) {
- do_IRQ(ar7_irq_base + irq);
- return;
- }
-
- /* Secondary IRQ's are cascaded through primary '0' */
- writel(1, REG(CR_OFFSET(irq)));
- status = readl(REG(SEC_SR_OFFSET));
- for (i = 0; i < 32; i++) {
- if (status & 1) {
- do_IRQ(ar7_irq_base + i + 40);
- return;
- }
- status >>= 1;
- }
-
- spurious_interrupt();
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
- if (pending & STATUSF_IP7) /* cpu timer */
- do_IRQ(7);
- else if (pending & STATUSF_IP2) /* int0 hardware line */
- ar7_cascade();
- else
- spurious_interrupt();
-}
diff --git a/target/linux/ar7/files-2.6.30/arch/mips/ar7/memory.c b/target/linux/ar7/files-2.6.30/arch/mips/ar7/memory.c
deleted file mode 100644
index e8522a1741..0000000000
--- a/target/linux/ar7/files-2.6.30/arch/mips/ar7/memory.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Based on arch/mips/mm/init.c
- * Copyright (C) 1994 - 2000 Ralf Baechle
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#include <linux/bootmem.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/pfn.h>
-#include <linux/proc_fs.h>
-#include <linux/string.h>
-#include <linux/swap.h>
-
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/sections.h>
-
-#include <asm/mips-boards/prom.h>
-
-static int __init memsize(void)
-{
- u32 size = (64 << 20);
- u32 *addr = (u32 *)KSEG1ADDR(0x14000000 + size - 4);
- u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end));
- u32 *tmpaddr = addr;
-
- while (tmpaddr > kernel_end) {
- *tmpaddr = (u32)tmpaddr;
- size >>= 1;
- tmpaddr -= size >> 2;
- }
-
- do {
- tmpaddr += size >> 2;
- if (*tmpaddr != (u32)tmpaddr)
- break;
- size <<= 1;
- } while (size < (64 << 20));
-
- writel(tmpaddr, &addr);
-
- return size;
-}
-
-void __init prom_meminit(void)
-{
- unsigned long pages;
-
- pages = memsize() >> PAGE_SHIFT;
- add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT,
- BOOT_MEM_RAM);
-}
-
-void __init prom_free_prom_memory(void)
-{
- return;
-}
diff --git a/target/linux/ar7/files-2.6.30/arch/mips/ar7/platform.c b/target/linux/ar7/files-2.6.30/arch/mips/ar7/platform.c
deleted file mode 100644
index b636216a30..0000000000
--- a/target/linux/ar7/files-2.6.30/arch/mips/ar7/platform.c
+++ /dev/null
@@ -1,535 +0,0 @@
-/*
- * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/version.h>
-#include <linux/vlynq.h>
-#include <linux/leds.h>
-#include <linux/string.h>
-
-#include <asm/addrspace.h>
-#include <asm/ar7/ar7.h>
-#include <asm/ar7/gpio.h>
-#include <asm/ar7/prom.h>
-
-struct plat_vlynq_data {
- struct plat_vlynq_ops ops;
- int gpio_bit;
- int reset_bit;
-};
-
-
-static int vlynq_on(struct vlynq_device *dev)
-{
- int result;
- struct plat_vlynq_data *pdata = dev->dev.platform_data;
-
- if ((result = gpio_request(pdata->gpio_bit, "vlynq")))
- goto out;
-
- ar7_device_reset(pdata->reset_bit);
-
- if ((result = ar7_gpio_disable(pdata->gpio_bit)))
- goto out_enabled;
-
- if ((result = ar7_gpio_enable(pdata->gpio_bit)))
- goto out_enabled;
-
- if ((result = gpio_direction_output(pdata->gpio_bit, 0)))
- goto out_gpio_enabled;
-
- mdelay(50);
-
- gpio_set_value(pdata->gpio_bit, 1);
- mdelay(50);
-
- return 0;
-
-out_gpio_enabled:
- ar7_gpio_disable(pdata->gpio_bit);
-out_enabled:
- ar7_device_disable(pdata->reset_bit);
- gpio_free(pdata->gpio_bit);
-out:
- return result;
-}
-
-static void vlynq_off(struct vlynq_device *dev)
-{
- struct plat_vlynq_data *pdata = dev->dev.platform_data;
- ar7_gpio_disable(pdata->gpio_bit);
- gpio_free(pdata->gpio_bit);
- ar7_device_disable(pdata->reset_bit);
-}
-
-static struct resource physmap_flash_resource = {
- .name = "mem",
- .flags = IORESOURCE_MEM,
- .start = 0x10000000,
- .end = 0x107fffff,
-};
-
-static struct resource cpmac_low_res[] = {
- {
- .name = "regs",
- .flags = IORESOURCE_MEM,
- .start = AR7_REGS_MAC0,
- .end = AR7_REGS_MAC0 + 0x7ff,
- },
- {
- .name = "irq",
- .flags = IORESOURCE_IRQ,
- .start = 27,
- .end = 27,
- },
-};
-
-static struct resource cpmac_high_res[] = {
- {
- .name = "regs",
- .flags = IORESOURCE_MEM,
- .start = AR7_REGS_MAC1,
- .end = AR7_REGS_MAC1 + 0x7ff,
- },
- {
- .name = "irq",
- .flags = IORESOURCE_IRQ,
- .start = 41,
- .end = 41,
- },
-};
-
-static struct resource vlynq_low_res[] = {
- {
- .name = "regs",
- .flags = IORESOURCE_MEM,
- .start = AR7_REGS_VLYNQ0,
- .end = AR7_REGS_VLYNQ0 + 0xff,
- },
- {
- .name = "irq",
- .flags = IORESOURCE_IRQ,
- .start = 29,
- .end = 29,
- },
- {
- .name = "mem",
- .flags = IORESOURCE_MEM,
- .start = 0x04000000,
- .end = 0x04ffffff,
- },
- {
- .name = "devirq",
- .flags = IORESOURCE_IRQ,
- .start = 80,
- .end = 111,
- },
-};
-
-static struct resource vlynq_high_res[] = {
- {
- .name = "regs",
- .flags = IORESOURCE_MEM,
- .start = AR7_REGS_VLYNQ1,
- .end = AR7_REGS_VLYNQ1 + 0xff,
- },
- {
- .name = "irq",
- .flags = IORESOURCE_IRQ,
- .start = 33,
- .end = 33,
- },
- {
- .name = "mem",
- .flags = IORESOURCE_MEM,
- .start = 0x0c000000,
- .end = 0x0cffffff,
- },
- {
- .name = "devirq",
- .flags = IORESOURCE_IRQ,
- .start = 112,
- .end = 143,
- },
-};
-
-static struct resource usb_res[] = {
- {
- .name = "regs",
- .flags = IORESOURCE_MEM,
- .start = AR7_REGS_USB,
- .end = AR7_REGS_USB + 0xff,
- },
- {
- .name = "irq",
- .flags = IORESOURCE_IRQ,
- .start = 32,
- .end = 32,
- },
- {
- .name = "mem",
- .flags = IORESOURCE_MEM,
- .start = 0x03400000,
- .end = 0x034001fff,
- },
-};
-
-static struct physmap_flash_data physmap_flash_data = {
- .width = 2,
-};
-
-static struct plat_cpmac_data cpmac_low_data = {
- .reset_bit = 17,
- .power_bit = 20,
- .phy_mask = 0x80000000,
-};
-
-static struct plat_cpmac_data cpmac_high_data = {
- .reset_bit = 21,
- .power_bit = 22,
- .phy_mask = 0x7fffffff,
-};
-
-static struct plat_vlynq_data vlynq_low_data = {
- .ops.on = vlynq_on,
- .ops.off = vlynq_off,
- .reset_bit = 20,
- .gpio_bit = 18,
-};
-
-static struct plat_vlynq_data vlynq_high_data = {
- .ops.on = vlynq_on,
- .ops.off = vlynq_off,
- .reset_bit = 16,
- .gpio_bit = 19,
-};
-
-static struct platform_device physmap_flash = {
- .id = 0,
- .name = "physmap-flash",
- .dev.platform_data = &physmap_flash_data,
- .resource = &physmap_flash_resource,
- .num_resources = 1,
-};
-
-static u64 cpmac_dma_mask = DMA_32BIT_MASK;
-static struct platform_device cpmac_low = {
- .id = 0,
- .name = "cpmac",
- .dev = {
- .dma_mask = &cpmac_dma_mask,
- .coherent_dma_mask = DMA_32BIT_MASK,
- .platform_data = &cpmac_low_data,
- },
- .resource = cpmac_low_res,
- .num_resources = ARRAY_SIZE(cpmac_low_res),
-};
-
-static struct platform_device cpmac_high = {
- .id = 1,
- .name = "cpmac",
- .dev = {
- .dma_mask = &cpmac_dma_mask,
- .coherent_dma_mask = DMA_32BIT_MASK,
- .platform_data = &cpmac_high_data,
- },
- .resource = cpmac_high_res,
- .num_resources = ARRAY_SIZE(cpmac_high_res),
-};
-
-static struct platform_device vlynq_low = {
- .id = 0,
- .name = "vlynq",
- .dev.platform_data = &vlynq_low_data,
- .resource = vlynq_low_res,
- .num_resources = ARRAY_SIZE(vlynq_low_res),
-};
-
-static struct platform_device vlynq_high = {
- .id = 1,
- .name = "vlynq",
- .dev.platform_data = &vlynq_high_data,
- .resource = vlynq_high_res,
- .num_resources = ARRAY_SIZE(vlynq_high_res),
-};
-
-
-/* This is proper way to define uart ports, but they are then detected
- * as xscale and, obviously, don't work...
- */
-#if !defined(CONFIG_SERIAL_8250)
-
-static struct plat_serial8250_port uart0_data = {
- .mapbase = AR7_REGS_UART0,
- .irq = AR7_IRQ_UART0,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-};
-
-static struct plat_serial8250_port uart1_data = {
- .mapbase = UR8_REGS_UART1,
- .irq = AR7_IRQ_UART1,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-};
-
-static struct plat_serial8250_port uart_data[] = {
- uart0_data,
- uart1_data,
- { .flags = 0 }
-};
-
-static struct plat_serial8250_port uart_data_single[] = {
- uart0_data,
- { .flags = 0 }
-};
-
-static struct platform_device uart = {
- .id = 0,
- .name = "serial8250",
- .dev.platform_data = uart_data_single
-};
-#endif
-
-static struct gpio_led default_leds[] = {
- { .name = "status", .gpio = 8, .active_low = 1, },
-};
-
-static struct gpio_led dsl502t_leds[] = {
- { .name = "status", .gpio = 9, .active_low = 1, },
- { .name = "ethernet", .gpio = 7, .active_low = 1, },
- { .name = "usb", .gpio = 12, .active_low = 1, },
-};
-
-static struct gpio_led dg834g_leds[] = {
- { .name = "ppp", .gpio = 6, .active_low = 1, },
- { .name = "status", .gpio = 7, .active_low = 1, },
- { .name = "adsl", .gpio = 8, .active_low = 1, },
- { .name = "wifi", .gpio = 12, .active_low = 1, },
- { .name = "power", .gpio = 14, .active_low = 1, .default_trigger = "default-on", },
-};
-
-static struct gpio_led fb_sl_leds[] = {
- { .name = "1", .gpio = 7, },
- { .name = "2", .gpio = 13, .active_low = 1, },
- { .name = "3", .gpio = 10, .active_low = 1, },
- { .name = "4", .gpio = 12, .active_low = 1, },
- { .name = "5", .gpio = 9, .active_low = 1, },
-};
-
-static struct gpio_led fb_fon_leds[] = {
- { .name = "1", .gpio = 8, },
- { .name = "2", .gpio = 3, .active_low = 1, },
- { .name = "3", .gpio = 5, },
- { .name = "4", .gpio = 4, .active_low = 1, },
- { .name = "5", .gpio = 11, .active_low = 1, },
-};
-
-static struct gpio_led_platform_data ar7_led_data;
-
-static struct platform_device ar7_gpio_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &ar7_led_data,
- }
-};
-
-static struct platform_device ar7_udc = {
- .id = -1,
- .name = "ar7_udc",
- .resource = usb_res,
- .num_resources = ARRAY_SIZE(usb_res),
-};
-
-static inline unsigned char char2hex(char h)
-{
- switch (h) {
- case '0': case '1': case '2': case '3': case '4':
- case '5': case '6': case '7': case '8': case '9':
- return h - '0';
- case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
- return h - 'A' + 10;
- case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
- return h - 'a' + 10;
- default:
- return 0;
- }
-}
-
-static void cpmac_get_mac(int instance, unsigned char *dev_addr)
-{
- int i;
- char name[5], default_mac[] = "00:00:00:12:34:56", *mac;
-
- mac = NULL;
- sprintf(name, "mac%c", 'a' + instance);
- mac = prom_getenv(name);
- if (!mac) {
- sprintf(name, "mac%c", 'a');
- mac = prom_getenv(name);
- }
- if (!mac)
- mac = default_mac;
- for (i = 0; i < 6; i++)
- dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
- char2hex(mac[i * 3 + 1]);
-}
-
-static void __init detect_leds(void)
-{
- char *prId, *usb_prod;
-
- /* Default LEDs */
- ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
- ar7_led_data.leds = default_leds;
-
- /* FIXME: the whole thing is unreliable */
- prId = prom_getenv("ProductID");
- usb_prod = prom_getenv("usb_prod");
-
- /* If we can't get the product id from PROM, use the default LEDs */
- if (!prId)
- return;
-
- if (strstr(prId, "Fritz_Box_FON")) {
- ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds);
- ar7_led_data.leds = fb_fon_leds;
- } else if (strstr(prId, "Fritz_Box_")) {
- ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds);
- ar7_led_data.leds = fb_sl_leds;
- } else if ((!strcmp(prId, "AR7RD") || !strcmp(prId, "AR7DB")) && usb_prod != NULL && strstr(usb_prod, "DSL-502T")) {
- ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds);
- ar7_led_data.leds = dsl502t_leds;
- } else if (strstr(prId, "DG834")) {
- ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
- ar7_led_data.leds = dg834g_leds;
- }
-}
-
-static int __init ar7_register_devices(void)
-{
- int res;
-
-#ifdef CONFIG_SERIAL_8250
-
- static struct uart_port uart_port[2];
-
- memset(uart_port, 0, sizeof(struct uart_port) * 2);
-
- uart_port[0].type = PORT_AR7;
- uart_port[0].line = 0;
- uart_port[0].irq = AR7_IRQ_UART0;
- uart_port[0].uartclk = ar7_bus_freq() / 2;
- uart_port[0].iotype = UPIO_MEM;
- uart_port[0].mapbase = AR7_REGS_UART0;
- uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
- uart_port[0].regshift = 2;
- uart_port[0].flags = UPF_IOREMAP;
- res = early_serial_setup(&uart_port[0]);
- if (res)
- return res;
-
-
- /* Only TNETD73xx have a second serial port */
- if (ar7_has_second_uart()) {
- uart_port[1].type = PORT_AR7;
- uart_port[1].line = 1;
- uart_port[1].irq = AR7_IRQ_UART1;
- uart_port[1].uartclk = ar7_bus_freq() / 2;
- uart_port[1].iotype = UPIO_MEM;
- uart_port[1].mapbase = UR8_REGS_UART1;
- uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
- uart_port[1].regshift = 2;
- uart_port[1].flags = UPF_IOREMAP;
- res = early_serial_setup(&uart_port[1]);
- if (res)
- return res;
- }
-
-#else /* !CONFIG_SERIAL_8250 */
-
- uart_data[0].uartclk = ar7_bus_freq() / 2;
- uart_data[1].uartclk = uart_data[0].uartclk;
-
- /* Only TNETD73xx have a second serial port */
- if (ar7_has_second_uart())
- uart.dev.platform_data = uart_data;
-
- res = platform_device_register(&uart);
- if (res)
- return res;
-
-#endif /* CONFIG_SERIAL_8250 */
-
- res = platform_device_register(&physmap_flash);
- if (res)
- return res;
-
- ar7_device_disable(vlynq_low_data.reset_bit);
- res = platform_device_register(&vlynq_low);
- if (res)
- return res;
-
- if (ar7_has_high_vlynq()) {
- ar7_device_disable(vlynq_high_data.reset_bit);
- res = platform_device_register(&vlynq_high);
- if (res)
- return res;
- }
-
- if (ar7_has_high_cpmac()) {
- cpmac_get_mac(1, cpmac_high_data.dev_addr);
- res = platform_device_register(&cpmac_high);
- if (res)
- return res;
- } else {
- cpmac_low_data.phy_mask = 0xffffffff;
- }
-
- cpmac_get_mac(0, cpmac_low_data.dev_addr);
- res = platform_device_register(&cpmac_low);
- if (res)
- return res;
-
- detect_leds();
- res = platform_device_register(&ar7_gpio_leds);
- if (res)
- return res;
-
- res = platform_device_register(&ar7_udc);
-
- return res;
-}
-
-
-arch_initcall(ar7_register_devices);
diff --git a/target/linux/ar7/files-2.6.30/arch/mips/ar7/prom.c b/target/linux/ar7/files-2.6.30/arch/mips/ar7/prom.c
deleted file mode 100644
index a72f2c9557..0000000000
--- a/target/linux/ar7/files-2.6.30/arch/mips/ar7/prom.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Putting things on the screen/serial line using YAMONs facilities.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/serial_reg.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/io.h>
-#include <asm/bootinfo.h>
-
-#include <asm/ar7/ar7.h>
-#include <asm/ar7/prom.h>
-
-#define MAX_ENTRY 80
-
-struct env_var {
- char *name;
- char *value;
-};
-
-static struct env_var adam2_env[MAX_ENTRY] = { { 0, }, };
-
-char *prom_getenv(const char *name)
-{
- int i;
- for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++)
- if (!strcmp(name, adam2_env[i].name))
- return adam2_env[i].value;
-
- return NULL;
-}
-EXPORT_SYMBOL(prom_getenv);
-
-char * __init prom_getcmdline(void)
-{
- return &(arcs_cmdline[0]);
-}
-
-static void __init ar7_init_cmdline(int argc, char *argv[])
-{
- char *cp;
- int actr;
-
- actr = 1; /* Always ignore argv[0] */
-
- cp = &(arcs_cmdline[0]);
- while (actr < argc) {
- strcpy(cp, argv[actr]);
- cp += strlen(argv[actr]);
- *cp++ = ' ';
- actr++;
- }
- if (cp != &(arcs_cmdline[0])) {
- /* get rid of trailing space */
- --cp;
- *cp = '\0';
- }
-}
-
-struct psbl_rec {
- u32 psbl_size;
- u32 env_base;
- u32 env_size;
- u32 ffs_base;
- u32 ffs_size;
-};
-
-static __initdata char psp_env_version[] = "TIENV0.8";
-
-struct psp_env_chunk {
- u8 num;
- u8 ctrl;
- u16 csum;
- u8 len;
- char data[11];
-} __attribute__ ((packed));
-
-struct psp_var_map_entry {
- u8 num;
- char *value;
-};
-
-static struct psp_var_map_entry psp_var_map[] = {
- { 1, "cpufrequency" },
- { 2, "memsize" },
- { 3, "flashsize" },
- { 4, "modetty0" },
- { 5, "modetty1" },
- { 8, "maca" },
- { 9, "macb" },
- { 28, "sysfrequency" },
- { 38, "mipsfrequency" },
-};
-
-/*
-
-Well-known variable (num is looked up in table above for matching variable name)
-Example: cpufrequency=211968000
-+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
-| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF
-+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
-
-Name=Value pair in a single chunk
-Example: NAME=VALUE
-+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
-| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0
-+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
-
-Name=Value pair in 2 chunks (len is the number of chunks)
-Example: bootloaderVersion=1.3.7.15
-+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
-| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V
-+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
-| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0
-+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
-
-Data is padded with 0xFF
-
-*/
-
-#define PSP_ENV_SIZE 4096
-
-static char psp_env_data[PSP_ENV_SIZE] = { 0, };
-
-static char * __init lookup_psp_var_map(u8 num)
-{
- int i;
-
- for (i = 0; i < sizeof(psp_var_map); i++)
- if (psp_var_map[i].num == num)
- return psp_var_map[i].value;
-
- return NULL;
-}
-
-static void __init add_adam2_var(char *name, char *value)
-{
- int i;
- for (i = 0; i < MAX_ENTRY; i++) {
- if (!adam2_env[i].name) {
- adam2_env[i].name = name;
- adam2_env[i].value = value;
- return;
- } else if (!strcmp(adam2_env[i].name, name)) {
- adam2_env[i].value = value;
- return;
- }
- }
-}
-
-static int __init parse_psp_env(void *psp_env_base)
-{
- int i, n;
- char *name, *value;
- struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data;
-
- memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE);
-
- i = 1;
- n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk);
- while (i < n) {
- if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n))
- break;
- value = chunks[i].data;
- if (chunks[i].num) {
- name = lookup_psp_var_map(chunks[i].num);
- } else {
- name = value;
- value += strlen(name) + 1;
- }
- if (name)
- add_adam2_var(name, value);
- i += chunks[i].len;
- }
- return 0;
-}
-
-static void __init ar7_init_env(struct env_var *env)
-{
- int i;
- struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300));
- void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
-
- if (strcmp(psp_env, psp_env_version) == 0) {
- parse_psp_env(psp_env);
- } else {
- for (i = 0; i < MAX_ENTRY; i++, env++)
- if (env->name)
- add_adam2_var(env->name, env->value);
- }
-}
-
-static void __init console_config(void)
-{
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- char console_string[40];
- int baud = 0;
- char parity = '\0', bits = '\0', flow = '\0';
- char *s, *p;
-
- if (strstr(prom_getcmdline(), "console="))
- return;
-
-#ifdef CONFIG_KGDB
- if (!strstr(prom_getcmdline(), "nokgdb")) {
- strcat(prom_getcmdline(), " console=kgdb");
- kgdb_enabled = 1;
- return;
- }
-#endif
-
- if ((s = prom_getenv("modetty0"))) {
- baud = simple_strtoul(s, &p, 10);
- s = p;
- if (*s == ',') s++;
- if (*s) parity = *s++;
- if (*s == ',') s++;
- if (*s) bits = *s++;
- if (*s == ',') s++;
- if (*s == 'h') flow = 'r';
- }
-
- if (baud == 0)
- baud = 38400;
- if (parity != 'n' && parity != 'o' && parity != 'e')
- parity = 'n';
- if (bits != '7' && bits != '8')
- bits = '8';
-
- if (flow == 'r')
- sprintf(console_string, " console=ttyS0,%d%c%c%c", baud,
- parity, bits, flow);
- else
- sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity,
- bits);
- strcat(prom_getcmdline(), console_string);
-#endif
-}
-
-void __init prom_init(void)
-{
- ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
- ar7_init_env((struct env_var *)fw_arg2);
- console_config();
-}
-
-#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4)))
-static inline unsigned int serial_in(int offset)
-{
- return readb((void *)PORT(offset));
-}
-
-static inline void serial_out(int offset, int value)
-{
- writeb(value, (void *)PORT(offset));
-}
-
-char prom_getchar(void)
-{
- while (!(serial_in(UART_LSR) & UART_LSR_DR));
- return serial_in(UART_RX);
-}
-
-int prom_putchar(char c)
-{
- while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0);
- serial_out(UART_TX, c);
- return 1;
-}
-
-/* from adm5120/prom.c */
-void prom_printf(const char *fmt, ...)
-{
- va_list args;
- int l;
- char *p, *buf_end;
- char buf[1024];
-
- va_start(args, fmt);
- l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */
- va_end(args);
-
- buf_end = buf + l;
-
- for (p = buf; p < buf_end; p++) {
- /* Crude cr/nl handling is better than none */
- if (*p == '\n')
- prom_putchar('\r');
- prom_putchar(*p);
- }
-}
-
-#ifdef CONFIG_KGDB
-int putDebugChar(char c)
-{
- return prom_putchar(c);
-}
-
-char getDebugChar(void)
-{
- return prom_getchar();
-}
-#endif
diff --git a/target/linux/ar7/files-2.6.30/arch/mips/ar7/setup.c b/target/linux/ar7/files-2.6.30/arch/mips/ar7/setup.c
deleted file mode 100644
index 35b7b8d77e..0000000000
--- a/target/linux/ar7/files-2.6.30/arch/mips/ar7/setup.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/version.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/ar7/ar7.h>
-#include <asm/ar7/gpio.h>
-#include <asm/ar7/prom.h>
-
-static int titan_variant; /*hold the results of the gpio_init_titan_variant() so that it is only called once*/
-static void ar7_machine_restart(char *command);
-static void ar7_machine_halt(void);
-static void ar7_machine_power_off(void);
-
-static void ar7_machine_restart(char *command)
-{
- u32 *softres_reg = (u32 *)ioremap(AR7_REGS_RESET +
- AR7_RESET_SOFTWARE, 1);
- writel(1, softres_reg);
-}
-
-static void ar7_machine_halt(void)
-{
- while (1);
-}
-
-static void ar7_machine_power_off(void)
-{
- u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
- u32 power_state = readl(power_reg) | (3 << 30);
- writel(power_state, power_reg);
- ar7_machine_halt();
-}
-
-const char *get_system_type(void)
-{
- u16 chip_id = ar7_chip_id();
- switch (chip_id) {
- case AR7_CHIP_7300:
- return "TI AR7 (TNETD7300)";
- case AR7_CHIP_7100:
- return "TI AR7 (TNETD7100)";
- case AR7_CHIP_7200:
- return "TI AR7 (TNETD7200)";
- case AR7_CHIP_TITAN:
- titan_variant = ar7_init_titan_variant();
- switch (titan_variant /*(gpio_get_value_titan(1) >> 12) & 0xf*/) {
- case TITAN_CHIP_1050:
- return "TI AR7 (TNETV1050)";
- case TITAN_CHIP_1055:
- return "TI AR7 (TNETV1055)";
- case TITAN_CHIP_1056:
- return "TI AR7 (TNETV1056)";
- case TITAN_CHIP_1060:
- return "TI AR7 (TNETV1060)";
- }
- default:
- return "TI AR7 (Unknown)";
- }
-}
-
-static int __init ar7_init_console(void)
-{
- return 0;
-}
-
-/*
- * Initializes basic routines and structures pointers, memory size (as
- * given by the bios and saves the command line.
- */
-
-extern void ar7_init_clocks(void);
-
-void __init plat_mem_setup(void)
-{
- unsigned long io_base;
-
- _machine_restart = ar7_machine_restart;
- _machine_halt = ar7_machine_halt;
- pm_power_off = ar7_machine_power_off;
- panic_timeout = 3;
-
- io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000);
- if (!io_base) panic("Can't remap IO base!\n");
- set_io_port_base(io_base);
-
- prom_meminit();
- ar7_init_clocks();
-
- ioport_resource.start = 0;
- ioport_resource.end = ~0;
- iomem_resource.start = 0;
- iomem_resource.end = ~0;
-
- printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n",
- get_system_type(),
- ar7_chip_id(), ar7_chip_rev());
-}
-
-console_initcall(ar7_init_console);
diff --git a/target/linux/ar7/files-2.6.30/arch/mips/ar7/time.c b/target/linux/ar7/files-2.6.30/arch/mips/ar7/time.c
deleted file mode 100644
index 2188d9a855..0000000000
--- a/target/linux/ar7/files-2.6.30/arch/mips/ar7/time.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Setting up the clock on the MIPS boards.
- */
-
-#include <linux/version.h>
-#include <asm/time.h>
-#include <asm/ar7/ar7.h>
-
-void __init plat_time_init(void)
-{
- mips_hpt_frequency = ar7_cpu_freq() / 2;
-}
diff --git a/target/linux/ar7/files-2.6.30/arch/mips/include/asm/ar7 b/target/linux/ar7/files-2.6.30/arch/mips/include/asm/ar7
deleted file mode 120000
index 4de8fbc8bc..0000000000
--- a/target/linux/ar7/files-2.6.30/arch/mips/include/asm/ar7
+++ /dev/null
@@ -1 +0,0 @@
-../../../../include/asm-mips/ar7 \ No newline at end of file
diff --git a/target/linux/ar7/files-2.6.30/drivers/char/ar7_gpio.c b/target/linux/ar7/files-2.6.30/drivers/char/ar7_gpio.c
deleted file mode 100644
index 6b38bbd89f..0000000000
--- a/target/linux/ar7/files-2.6.30/drivers/char/ar7_gpio.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Copyright (C) 2007 Nicolas Thill <nico@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/cdev.h>
-#include <gpio.h>
-
-#define DRVNAME "ar7_gpio"
-#define LONGNAME "TI AR7 GPIOs Driver"
-
-MODULE_AUTHOR("Nicolas Thill <nico@openwrt.org>");
-MODULE_DESCRIPTION(LONGNAME);
-MODULE_LICENSE("GPL");
-
-static int ar7_gpio_major;
-
-static ssize_t ar7_gpio_write(struct file *file, const char __user *buf,
- size_t len, loff_t *ppos)
-{
- int pin = iminor(file->f_dentry->d_inode);
- size_t i;
-
- for (i = 0; i < len; ++i) {
- char c;
- if (get_user(c, buf + i))
- return -EFAULT;
- switch (c) {
- case '0':
- gpio_set_value(pin, 0);
- break;
- case '1':
- gpio_set_value(pin, 1);
- break;
- case 'd':
- case 'D':
- ar7_gpio_disable(pin);
- break;
- case 'e':
- case 'E':
- ar7_gpio_enable(pin);
- break;
- case 'i':
- case 'I':
- case '<':
- gpio_direction_input(pin);
- break;
- case 'o':
- case 'O':
- case '>':
- gpio_direction_output(pin, 0);
- break;
- default:
- return -EINVAL;
- }
- }
-
- return len;
-}
-
-static ssize_t ar7_gpio_read(struct file *file, char __user *buf,
- size_t len, loff_t *ppos)
-{
- int pin = iminor(file->f_dentry->d_inode);
- int value;
-
- value = gpio_get_value(pin);
- if (put_user(value ? '1' : '0', buf))
- return -EFAULT;
-
- return 1;
-}
-
-static int ar7_gpio_open(struct inode *inode, struct file *file)
-{
- int m = iminor(inode);
-
- if (m >= (ar7_is_titan() ? TITAN_GPIO_MAX : AR7_GPIO_MAX))
- return -EINVAL;
-
- return nonseekable_open(inode, file);
-}
-
-static int ar7_gpio_release(struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-static const struct file_operations ar7_gpio_fops = {
- .owner = THIS_MODULE,
- .write = ar7_gpio_write,
- .read = ar7_gpio_read,
- .open = ar7_gpio_open,
- .release = ar7_gpio_release,
- .llseek = no_llseek,
-};
-
-static struct platform_device *ar7_gpio_device;
-
-static int __init ar7_gpio_init(void)
-{
- int rc;
-
- ar7_gpio_device = platform_device_alloc(DRVNAME, -1);
- if (!ar7_gpio_device)
- return -ENOMEM;
-
- rc = platform_device_add(ar7_gpio_device);
- if (rc < 0)
- goto out_put;
-
- rc = register_chrdev(ar7_gpio_major, DRVNAME, &ar7_gpio_fops);
- if (rc < 0)
- goto out_put;
-
- ar7_gpio_major = rc;
-
- rc = 0;
-
- goto out;
-
-out_put:
- platform_device_put(ar7_gpio_device);
-out:
- return rc;
-}
-
-static void __exit ar7_gpio_exit(void)
-{
- unregister_chrdev(ar7_gpio_major, DRVNAME);
- platform_device_unregister(ar7_gpio_device);
-}
-
-module_init(ar7_gpio_init);
-module_exit(ar7_gpio_exit);
diff --git a/target/linux/ar7/files-2.6.30/drivers/char/watchdog/ar7_wdt.c b/target/linux/ar7/files-2.6.30/drivers/char/watchdog/ar7_wdt.c
deleted file mode 100644
index 97cd8105a9..0000000000
--- a/target/linux/ar7/files-2.6.30/drivers/char/watchdog/ar7_wdt.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- * drivers/watchdog/ar7_wdt.c
- *
- * Copyright (C) 2007 Nicolas Thill <nico@openwrt.org>
- * Copyright (c) 2005 Enrik Berkhan <Enrik.Berkhan@akk.org>
- *
- * Some code taken from:
- * National Semiconductor SCx200 Watchdog support
- * Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/fs.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/uaccess.h>
-
-#include <asm/addrspace.h>
-#include <asm/ar7/ar7.h>
-
-#define DRVNAME "ar7_wdt"
-#define LONGNAME "TI AR7 Watchdog Timer"
-
-MODULE_AUTHOR("Nicolas Thill <nico@openwrt.org>");
-MODULE_DESCRIPTION(LONGNAME);
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-
-static int margin = 60;
-module_param(margin, int, 0);
-MODULE_PARM_DESC(margin, "Watchdog margin in seconds");
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
-
-#define READ_REG(x) readl((void __iomem *)&(x))
-#define WRITE_REG(x, v) writel((v), (void __iomem *)&(x))
-
-struct ar7_wdt {
- u32 kick_lock;
- u32 kick;
- u32 change_lock;
- u32 change;
- u32 disable_lock;
- u32 disable;
- u32 prescale_lock;
- u32 prescale;
-};
-
-static struct semaphore open_semaphore;
-static unsigned expect_close;
-
-/* XXX currently fixed, allows max margin ~68.72 secs */
-#define prescale_value 0xffff
-
-/* Offset of the WDT registers */
-static unsigned long ar7_regs_wdt;
-/* Pointer to the remapped WDT IO space */
-static struct ar7_wdt *ar7_wdt;
-static void ar7_wdt_get_regs(void)
-{
- u16 chip_id = ar7_chip_id();
- switch (chip_id) {
- case AR7_CHIP_7100:
- case AR7_CHIP_7200:
- ar7_regs_wdt = AR7_REGS_WDT;
- break;
- default:
- ar7_regs_wdt = UR8_REGS_WDT;
- break;
- }
-}
-
-
-static void ar7_wdt_kick(u32 value)
-{
- WRITE_REG(ar7_wdt->kick_lock, 0x5555);
- if ((READ_REG(ar7_wdt->kick_lock) & 3) == 1) {
- WRITE_REG(ar7_wdt->kick_lock, 0xaaaa);
- if ((READ_REG(ar7_wdt->kick_lock) & 3) == 3) {
- WRITE_REG(ar7_wdt->kick, value);
- return;
- }
- }
- printk(KERN_ERR DRVNAME ": failed to unlock WDT kick reg\n");
-}
-
-static void ar7_wdt_prescale(u32 value)
-{
- WRITE_REG(ar7_wdt->prescale_lock, 0x5a5a);
- if ((READ_REG(ar7_wdt->prescale_lock) & 3) == 1) {
- WRITE_REG(ar7_wdt->prescale_lock, 0xa5a5);
- if ((READ_REG(ar7_wdt->prescale_lock) & 3) == 3) {
- WRITE_REG(ar7_wdt->prescale, value);
- return;
- }
- }
- printk(KERN_ERR DRVNAME ": failed to unlock WDT prescale reg\n");
-}
-
-static void ar7_wdt_change(u32 value)
-{
- WRITE_REG(ar7_wdt->change_lock, 0x6666);
- if ((READ_REG(ar7_wdt->change_lock) & 3) == 1) {
- WRITE_REG(ar7_wdt->change_lock, 0xbbbb);
- if ((READ_REG(ar7_wdt->change_lock) & 3) == 3) {
- WRITE_REG(ar7_wdt->change, value);
- return;
- }
- }
- printk(KERN_ERR DRVNAME ": failed to unlock WDT change reg\n");
-}
-
-static void ar7_wdt_disable(u32 value)
-{
- WRITE_REG(ar7_wdt->disable_lock, 0x7777);
- if ((READ_REG(ar7_wdt->disable_lock) & 3) == 1) {
- WRITE_REG(ar7_wdt->disable_lock, 0xcccc);
- if ((READ_REG(ar7_wdt->disable_lock) & 3) == 2) {
- WRITE_REG(ar7_wdt->disable_lock, 0xdddd);
- if ((READ_REG(ar7_wdt->disable_lock) & 3) == 3) {
- WRITE_REG(ar7_wdt->disable, value);
- return;
- }
- }
- }
- printk(KERN_ERR DRVNAME ": failed to unlock WDT disable reg\n");
-}
-
-static void ar7_wdt_update_margin(int new_margin)
-{
- u32 change;
-
- change = new_margin * (ar7_vbus_freq() / prescale_value);
- if (change < 1) change = 1;
- if (change > 0xffff) change = 0xffff;
- ar7_wdt_change(change);
- margin = change * prescale_value / ar7_vbus_freq();
- printk(KERN_INFO DRVNAME
- ": timer margin %d seconds (prescale %d, change %d, freq %d)\n",
- margin, prescale_value, change, ar7_vbus_freq());
-}
-
-static void ar7_wdt_enable_wdt(void)
-{
- printk(KERN_DEBUG DRVNAME ": enabling watchdog timer\n");
- ar7_wdt_disable(1);
- ar7_wdt_kick(1);
-}
-
-static void ar7_wdt_disable_wdt(void)
-{
- printk(KERN_DEBUG DRVNAME ": disabling watchdog timer\n");
- ar7_wdt_disable(0);
-}
-
-static int ar7_wdt_open(struct inode *inode, struct file *file)
-{
- /* only allow one at a time */
- if (down_trylock(&open_semaphore))
- return -EBUSY;
- ar7_wdt_enable_wdt();
- expect_close = 0;
-
- return nonseekable_open(inode, file);
-}
-
-static int ar7_wdt_release(struct inode *inode, struct file *file)
-{
- if (!expect_close)
- printk(KERN_WARNING DRVNAME
- ": watchdog device closed unexpectedly,"
- "will not disable the watchdog timer\n");
- else if (!nowayout)
- ar7_wdt_disable_wdt();
-
- up(&open_semaphore);
-
- return 0;
-}
-
-static int ar7_wdt_notify_sys(struct notifier_block *this,
- unsigned long code, void *unused)
-{
- if (code == SYS_HALT || code == SYS_POWER_OFF)
- if (!nowayout)
- ar7_wdt_disable_wdt();
-
- return NOTIFY_DONE;
-}
-
-static struct notifier_block ar7_wdt_notifier = {
- .notifier_call = ar7_wdt_notify_sys
-};
-
-static ssize_t ar7_wdt_write(struct file *file, const char *data,
- size_t len, loff_t *ppos)
-{
- /* check for a magic close character */
- if (len) {
- size_t i;
-
- ar7_wdt_kick(1);
-
- expect_close = 0;
- for (i = 0; i < len; ++i) {
- char c;
- if (get_user(c, data+i))
- return -EFAULT;
- if (c == 'V')
- expect_close = 1;
- }
-
- }
- return len;
-}
-
-static int ar7_wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- static struct watchdog_info ident = {
- .identity = LONGNAME,
- .firmware_version = 1,
- .options = (WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING),
- };
- int new_margin;
-
- switch (cmd) {
- default:
- return -ENOTTY;
- case WDIOC_GETSUPPORT:
- if (copy_to_user((struct watchdog_info *)arg, &ident,
- sizeof(ident)))
- return -EFAULT;
- return 0;
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- if (put_user(0, (int *)arg))
- return -EFAULT;
- return 0;
- case WDIOC_KEEPALIVE:
- ar7_wdt_kick(1);
- return 0;
- case WDIOC_SETTIMEOUT:
- if (get_user(new_margin, (int *)arg))
- return -EFAULT;
- if (new_margin < 1)
- return -EINVAL;
-
- ar7_wdt_update_margin(new_margin);
- ar7_wdt_kick(1);
-
- case WDIOC_GETTIMEOUT:
- if (put_user(margin, (int *)arg))
- return -EFAULT;
- return 0;
- }
-}
-
-static struct file_operations ar7_wdt_fops = {
- .owner = THIS_MODULE,
- .write = ar7_wdt_write,
- .ioctl = ar7_wdt_ioctl,
- .open = ar7_wdt_open,
- .release = ar7_wdt_release,
-};
-
-static struct miscdevice ar7_wdt_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &ar7_wdt_fops,
-};
-
-static int __init ar7_wdt_init(void)
-{
- int rc;
-
- ar7_wdt_get_regs();
-
- if (!request_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt),
- LONGNAME)) {
- printk(KERN_WARNING DRVNAME ": watchdog I/O region busy\n");
- return -EBUSY;
- }
-
- ar7_wdt = (struct ar7_wdt *)
- ioremap(ar7_regs_wdt, sizeof(struct ar7_wdt));
-
- ar7_wdt_disable_wdt();
- ar7_wdt_prescale(prescale_value);
- ar7_wdt_update_margin(margin);
-
- sema_init(&open_semaphore, 1);
-
- rc = register_reboot_notifier(&ar7_wdt_notifier);
- if (rc) {
- printk(KERN_ERR DRVNAME
- ": unable to register reboot notifier\n");
- goto out_alloc;
- }
-
- rc = misc_register(&ar7_wdt_miscdev);
- if (rc) {
- printk(KERN_ERR DRVNAME ": unable to register misc device\n");
- goto out_register;
- }
- goto out;
-
-out_register:
- unregister_reboot_notifier(&ar7_wdt_notifier);
-out_alloc:
- iounmap(ar7_wdt);
- release_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt));
-out:
- return rc;
-}
-
-static void __exit ar7_wdt_cleanup(void)
-{
- misc_deregister(&ar7_wdt_miscdev);
- unregister_reboot_notifier(&ar7_wdt_notifier);
- iounmap(ar7_wdt);
- release_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt));
-}
-
-module_init(ar7_wdt_init);
-module_exit(ar7_wdt_cleanup);
diff --git a/target/linux/ar7/files-2.6.30/drivers/vlynq/Kconfig b/target/linux/ar7/files-2.6.30/drivers/vlynq/Kconfig
deleted file mode 100644
index 2c8ffe0d19..0000000000
--- a/target/linux/ar7/files-2.6.30/drivers/vlynq/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-menu "TI VLYNQ"
-
-config VLYNQ
- bool "TI VLYNQ bus support"
- depends on AR7 && EXPERIMENTAL
- help
- Support for the TI VLYNQ bus
-
- The module will be called vlynq
-
- If unsure, say N
-
-endmenu
diff --git a/target/linux/ar7/files-2.6.30/drivers/vlynq/Makefile b/target/linux/ar7/files-2.6.30/drivers/vlynq/Makefile
deleted file mode 100644
index b3f61149b5..0000000000
--- a/target/linux/ar7/files-2.6.30/drivers/vlynq/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for kernel vlynq drivers
-#
-
-obj-$(CONFIG_VLYNQ) += vlynq.o
diff --git a/target/linux/ar7/files-2.6.30/drivers/vlynq/vlynq.c b/target/linux/ar7/files-2.6.30/drivers/vlynq/vlynq.c
deleted file mode 100644
index f4b7b0f98e..0000000000
--- a/target/linux/ar7/files-2.6.30/drivers/vlynq/vlynq.c
+++ /dev/null
@@ -1,783 +0,0 @@
-/*
- * Copyright (C) 2006, 2007 Eugene Konev <ejka@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <linux/vlynq.h>
-
-#define VLYNQ_CTRL_PM_ENABLE 0x80000000
-#define VLYNQ_CTRL_CLOCK_INT 0x00008000
-#define VLYNQ_CTRL_CLOCK_DIV(x) (((x) & 7) << 16)
-#define VLYNQ_CTRL_INT_LOCAL 0x00004000
-#define VLYNQ_CTRL_INT_ENABLE 0x00002000
-#define VLYNQ_CTRL_INT_VECTOR(x) (((x) & 0x1f) << 8)
-#define VLYNQ_CTRL_INT2CFG 0x00000080
-#define VLYNQ_CTRL_RESET 0x00000001
-
-#define VLYNQ_CTRL_CLOCK_MASK (0x7 << 16)
-
-#define VLYNQ_INT_OFFSET 0x00000014
-#define VLYNQ_REMOTE_OFFSET 0x00000080
-
-#define VLYNQ_STATUS_LINK 0x00000001
-#define VLYNQ_STATUS_LERROR 0x00000080
-#define VLYNQ_STATUS_RERROR 0x00000100
-
-#define VINT_ENABLE 0x00000100
-#define VINT_TYPE_EDGE 0x00000080
-#define VINT_LEVEL_LOW 0x00000040
-#define VINT_VECTOR(x) ((x) & 0x1f)
-#define VINT_OFFSET(irq) (8 * ((irq) % 4))
-
-#define VLYNQ_AUTONEGO_V2 0x00010000
-
-struct vlynq_regs {
- u32 revision;
- u32 control;
- u32 status;
- u32 int_prio;
- u32 int_status;
- u32 int_pending;
- u32 int_ptr;
- u32 tx_offset;
- struct vlynq_mapping rx_mapping[4];
- u32 chip;
- u32 autonego;
- u32 unused[6];
- u32 int_device[8];
-};
-
-#define vlynq_reg_read(reg) readl(&(reg))
-#define vlynq_reg_write(reg, val) writel(val, &(reg))
-
-static int __vlynq_enable_device(struct vlynq_device *dev);
-
-#ifdef VLYNQ_DEBUG
-static void vlynq_dump_regs(struct vlynq_device *dev)
-{
- int i;
- printk(KERN_DEBUG "VLYNQ local=%p remote=%p\n",
- dev->local, dev->remote);
- for (i = 0; i < 32; i++) {
- printk(KERN_DEBUG "VLYNQ: local %d: %08x\n",
- i + 1, ((u32 *)dev->local)[i]);
- printk(KERN_DEBUG "VLYNQ: remote %d: %08x\n",
- i + 1, ((u32 *)dev->remote)[i]);
- }
-}
-
-static void vlynq_dump_mem(u32 *base, int count)
-{
- int i;
- for (i = 0; i < (count + 3) / 4; i++) {
- if (i % 4 == 0) printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4);
- printk(KERN_DEBUG " 0x%08x", *(base + i));
- }
- printk(KERN_DEBUG "\n");
-}
-#endif
-
-int vlynq_linked(struct vlynq_device *dev)
-{
- int i;
-
- for (i = 0; i < 100; i++)
- if (vlynq_reg_read(dev->local->status) & VLYNQ_STATUS_LINK)
- return 1;
- else
- cpu_relax();
-
- return 0;
-}
-
-static void vlynq_reset(struct vlynq_device *dev)
-{
- vlynq_reg_write(dev->local->control,
- vlynq_reg_read(dev->local->control) |
- VLYNQ_CTRL_RESET);
-
- /* Wait for the devices to finish resetting */
- msleep(5);
-
- /* Remove reset bit */
- vlynq_reg_write(dev->local->control,
- vlynq_reg_read(dev->local->control) &
- ~VLYNQ_CTRL_RESET);
-
- /* Give some time for the devices to settle */
- msleep(5);
-}
-
-static void vlynq_irq_unmask(unsigned int irq)
-{
- u32 val;
- struct vlynq_device *dev = get_irq_chip_data(irq);
- int virq;
-
- BUG_ON(!dev);
- virq = irq - dev->irq_start;
- val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
- val |= (VINT_ENABLE | virq) << VINT_OFFSET(virq);
- vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
-}
-
-static void vlynq_irq_mask(unsigned int irq)
-{
- u32 val;
- struct vlynq_device *dev = get_irq_chip_data(irq);
- int virq;
-
- BUG_ON(!dev);
- virq = irq - dev->irq_start;
- val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
- val &= ~(VINT_ENABLE << VINT_OFFSET(virq));
- vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
-}
-
-static int vlynq_irq_type(unsigned int irq, unsigned int flow_type)
-{
- u32 val;
- struct vlynq_device *dev = get_irq_chip_data(irq);
- int virq;
-
- BUG_ON(!dev);
- virq = irq - dev->irq_start;
- val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
- switch (flow_type & IRQ_TYPE_SENSE_MASK) {
- case IRQ_TYPE_EDGE_RISING:
- case IRQ_TYPE_EDGE_FALLING:
- case IRQ_TYPE_EDGE_BOTH:
- val |= VINT_TYPE_EDGE << VINT_OFFSET(virq);
- val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq));
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq));
- val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq));
- break;
- case IRQ_TYPE_LEVEL_LOW:
- val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq));
- val |= VINT_LEVEL_LOW << VINT_OFFSET(virq);
- break;
- default:
- return -EINVAL;
- }
- vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
- return 0;
-}
-
-static void vlynq_local_ack(unsigned int irq)
-{
- struct vlynq_device *dev = get_irq_chip_data(irq);
- u32 status = vlynq_reg_read(dev->local->status);
- if (printk_ratelimit())
- printk(KERN_DEBUG "%s: local status: 0x%08x\n",
- dev->dev.bus_id, status);
- vlynq_reg_write(dev->local->status, status);
-}
-
-static void vlynq_remote_ack(unsigned int irq)
-{
- struct vlynq_device *dev = get_irq_chip_data(irq);
- u32 status = vlynq_reg_read(dev->remote->status);
- if (printk_ratelimit())
- printk(KERN_DEBUG "%s: remote status: 0x%08x\n",
- dev->dev.bus_id, status);
- vlynq_reg_write(dev->remote->status, status);
-}
-
-static irqreturn_t vlynq_irq(int irq, void *dev_id)
-{
- struct vlynq_device *dev = dev_id;
- u32 status;
- int virq = 0;
-
- status = vlynq_reg_read(dev->local->int_status);
- vlynq_reg_write(dev->local->int_status, status);
-
- if (unlikely(!status))
- spurious_interrupt();
-
- while (status) {
- if (status & 1)
- do_IRQ(dev->irq_start + virq);
- status >>= 1;
- virq++;
- }
-
- return IRQ_HANDLED;
-}
-
-static struct irq_chip vlynq_irq_chip = {
- .name = "vlynq",
- .unmask = vlynq_irq_unmask,
- .mask = vlynq_irq_mask,
- .set_type = vlynq_irq_type,
-};
-
-static struct irq_chip vlynq_local_chip = {
- .name = "vlynq local error",
- .unmask = vlynq_irq_unmask,
- .mask = vlynq_irq_mask,
- .ack = vlynq_local_ack,
-};
-
-static struct irq_chip vlynq_remote_chip = {
- .name = "vlynq local error",
- .unmask = vlynq_irq_unmask,
- .mask = vlynq_irq_mask,
- .ack = vlynq_remote_ack,
-};
-
-static int vlynq_setup_irq(struct vlynq_device *dev)
-{
- u32 val;
- int i, virq;
-
- if (dev->local_irq == dev->remote_irq) {
- printk(KERN_ERR
- "%s: local vlynq irq should be different from remote\n",
- dev->dev.bus_id);
- return -EINVAL;
- }
-
- /* Clear local and remote error bits */
- vlynq_reg_write(dev->local->status, vlynq_reg_read(dev->local->status));
- vlynq_reg_write(dev->remote->status,
- vlynq_reg_read(dev->remote->status));
-
- /* Now setup interrupts */
- val = VLYNQ_CTRL_INT_VECTOR(dev->local_irq);
- val |= VLYNQ_CTRL_INT_ENABLE | VLYNQ_CTRL_INT_LOCAL |
- VLYNQ_CTRL_INT2CFG;
- val |= vlynq_reg_read(dev->local->control);
- vlynq_reg_write(dev->local->int_ptr, VLYNQ_INT_OFFSET);
- vlynq_reg_write(dev->local->control, val);
-
- val = VLYNQ_CTRL_INT_VECTOR(dev->remote_irq);
- val |= VLYNQ_CTRL_INT_ENABLE;
- val |= vlynq_reg_read(dev->remote->control);
- vlynq_reg_write(dev->remote->int_ptr, VLYNQ_INT_OFFSET);
- vlynq_reg_write(dev->remote->control, val);
-
- for (i = dev->irq_start; i <= dev->irq_end; i++) {
- virq = i - dev->irq_start;
- if (virq == dev->local_irq) {
- set_irq_chip_and_handler(i, &vlynq_local_chip,
- handle_level_irq);
- set_irq_chip_data(i, dev);
- } else if (virq == dev->remote_irq) {
- set_irq_chip_and_handler(i, &vlynq_remote_chip,
- handle_level_irq);
- set_irq_chip_data(i, dev);
- } else {
- set_irq_chip_and_handler(i, &vlynq_irq_chip,
- handle_simple_irq);
- set_irq_chip_data(i, dev);
- vlynq_reg_write(dev->remote->int_device[virq >> 2], 0);
- }
- }
-
- if (request_irq(dev->irq, vlynq_irq, IRQF_SHARED, "vlynq", dev)) {
- printk(KERN_ERR "%s: request_irq failed\n", dev->dev.bus_id);
- return -EAGAIN;
- }
-
- return 0;
-}
-
-static void vlynq_device_release(struct device *dev)
-{
- struct vlynq_device *vdev = to_vlynq_device(dev);
- kfree(vdev);
-}
-
-static int vlynq_device_match(struct device *dev,
- struct device_driver *drv)
-{
- struct vlynq_device *vdev = to_vlynq_device(dev);
- struct vlynq_driver *vdrv = to_vlynq_driver(drv);
- struct vlynq_device_id *ids = vdrv->id_table;
-
- while (ids->id) {
- if (ids->id == vdev->dev_id) {
- vdev->divisor = ids->divisor;
- vlynq_set_drvdata(vdev, ids);
- printk(KERN_INFO "Driver found for VLYNQ " \
- "device: %08x\n", vdev->dev_id);
- return 1;
- }
- printk(KERN_DEBUG "Not using the %08x VLYNQ device's driver" \
- " for VLYNQ device: %08x\n", ids->id, vdev->dev_id);
- ids++;
- }
- return 0;
-}
-
-static int vlynq_device_probe(struct device *dev)
-{
- struct vlynq_device *vdev = to_vlynq_device(dev);
- struct vlynq_driver *drv = to_vlynq_driver(dev->driver);
- struct vlynq_device_id *id = vlynq_get_drvdata(vdev);
- int result = -ENODEV;
-
- get_device(dev);
- if (drv && drv->probe)
- result = drv->probe(vdev, id);
- if (result)
- put_device(dev);
- return result;
-}
-
-static int vlynq_device_remove(struct device *dev)
-{
- struct vlynq_driver *drv = to_vlynq_driver(dev->driver);
- if (drv && drv->remove)
- drv->remove(to_vlynq_device(dev));
- put_device(dev);
- return 0;
-}
-
-int __vlynq_register_driver(struct vlynq_driver *driver, struct module *owner)
-{
- driver->driver.name = driver->name;
- driver->driver.bus = &vlynq_bus_type;
- return driver_register(&driver->driver);
-}
-EXPORT_SYMBOL(__vlynq_register_driver);
-
-void vlynq_unregister_driver(struct vlynq_driver *driver)
-{
- driver_unregister(&driver->driver);
-}
-EXPORT_SYMBOL(vlynq_unregister_driver);
-
-static int __vlynq_try_remote(struct vlynq_device *dev)
-{
- int i;
-
- vlynq_reset(dev);
- for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ?
- i <= vlynq_rdiv8 : i >= vlynq_rdiv2;
- dev->dev_id ? i++ : i--) {
-
- if (!vlynq_linked(dev))
- break;
-
- vlynq_reg_write(dev->remote->control,
- (vlynq_reg_read(dev->remote->control) &
- ~VLYNQ_CTRL_CLOCK_MASK) |
- VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1));
- vlynq_reg_write(dev->local->control,
- ((vlynq_reg_read(dev->local->control)
- & ~(VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_MASK)) |
- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1)));
-
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
- "%s: using remote clock divisor %d\n",
- dev->dev.bus_id, i - vlynq_rdiv1 + 1);
- dev->divisor = i;
- return 0;
- } else {
- vlynq_reset(dev);
- }
- }
-
- return -ENODEV;
-}
-
-static int __vlynq_try_local(struct vlynq_device *dev)
-{
- int i;
-
- vlynq_reset(dev);
-
- for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
- i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
- dev->dev_id ? i++ : i--) {
-
- vlynq_reg_write(dev->local->control,
- (vlynq_reg_read(dev->local->control) &
- ~VLYNQ_CTRL_CLOCK_MASK) |
- VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1));
-
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
- "%s: using local clock divisor %d\n",
- dev->dev.bus_id, i - vlynq_ldiv1 + 1);
- dev->divisor = i;
- return 0;
- } else {
- vlynq_reset(dev);
- }
- }
-
- return -ENODEV;
-}
-
-static int __vlynq_try_external(struct vlynq_device *dev)
-{
- vlynq_reset(dev);
- if (!vlynq_linked(dev))
- return -ENODEV;
-
- vlynq_reg_write(dev->remote->control,
- (vlynq_reg_read(dev->remote->control) &
- ~VLYNQ_CTRL_CLOCK_INT));
-
- vlynq_reg_write(dev->local->control,
- (vlynq_reg_read(dev->local->control) &
- ~VLYNQ_CTRL_CLOCK_INT));
-
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG "%s: using external clock\n",
- dev->dev.bus_id);
- dev->divisor = vlynq_div_external;
- return 0;
- }
-
- return -ENODEV;
-}
-
-static int __vlynq_enable_device(struct vlynq_device *dev)
-{
- int result;
- struct plat_vlynq_ops *ops = dev->dev.platform_data;
-
- result = ops->on(dev);
- if (result)
- return result;
-
- switch (dev->divisor) {
- case vlynq_div_external:
- case vlynq_div_auto:
- /* When the device is brought from reset it should have clock
- generation negotiated by hardware.
- Check which device is generating clocks and perform setup
- accordingly */
- if (vlynq_linked(dev) && vlynq_reg_read(dev->remote->control) &
- VLYNQ_CTRL_CLOCK_INT) {
- if (!__vlynq_try_remote(dev) ||
- !__vlynq_try_local(dev) ||
- !__vlynq_try_external(dev))
- return 0;
- } else {
- if (!__vlynq_try_external(dev) ||
- !__vlynq_try_local(dev) ||
- !__vlynq_try_remote(dev))
- return 0;
- }
- break;
- case vlynq_ldiv1: case vlynq_ldiv2: case vlynq_ldiv3: case vlynq_ldiv4:
- case vlynq_ldiv5: case vlynq_ldiv6: case vlynq_ldiv7: case vlynq_ldiv8:
- vlynq_reg_write(dev->local->control,
- VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
- vlynq_ldiv1));
- vlynq_reg_write(dev->remote->control, 0);
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
- "%s: using local clock divisor %d\n",
- dev->dev.bus_id, dev->divisor - vlynq_ldiv1 + 1);
- return 0;
- }
- break;
- case vlynq_rdiv1: case vlynq_rdiv2: case vlynq_rdiv3: case vlynq_rdiv4:
- case vlynq_rdiv5: case vlynq_rdiv6: case vlynq_rdiv7: case vlynq_rdiv8:
- vlynq_reg_write(dev->local->control, 0);
- vlynq_reg_write(dev->remote->control,
- VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
- vlynq_rdiv1));
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
- "%s: using remote clock divisor %d\n",
- dev->dev.bus_id, dev->divisor - vlynq_rdiv1 + 1);
- return 0;
- }
- break;
- }
-
- ops->off(dev);
- return -ENODEV;
-}
-
-int vlynq_enable_device(struct vlynq_device *dev)
-{
- struct plat_vlynq_ops *ops = dev->dev.platform_data;
- int result = -ENODEV;
-
- result = __vlynq_enable_device(dev);
- if (result)
- return result;
-
- result = vlynq_setup_irq(dev);
- if (result)
- ops->off(dev);
-
- dev->enabled = !result;
- return result;
-}
-EXPORT_SYMBOL(vlynq_enable_device);
-
-
-void vlynq_disable_device(struct vlynq_device *dev)
-{
- struct plat_vlynq_ops *ops = dev->dev.platform_data;
-
- dev->enabled = 0;
- free_irq(dev->irq, dev);
- ops->off(dev);
-}
-EXPORT_SYMBOL(vlynq_disable_device);
-
-int vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset,
- struct vlynq_mapping *mapping)
-{
- int i;
-
- if (!dev->enabled)
- return -ENXIO;
-
- vlynq_reg_write(dev->local->tx_offset, tx_offset);
- for (i = 0; i < 4; i++) {
- vlynq_reg_write(dev->local->rx_mapping[i].offset,
- mapping[i].offset);
- vlynq_reg_write(dev->local->rx_mapping[i].size,
- mapping[i].size);
- }
- return 0;
-}
-EXPORT_SYMBOL(vlynq_set_local_mapping);
-
-int vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset,
- struct vlynq_mapping *mapping)
-{
- int i;
-
- if (!dev->enabled)
- return -ENXIO;
-
- vlynq_reg_write(dev->remote->tx_offset, tx_offset);
- for (i = 0; i < 4; i++) {
- vlynq_reg_write(dev->remote->rx_mapping[i].offset,
- mapping[i].offset);
- vlynq_reg_write(dev->remote->rx_mapping[i].size,
- mapping[i].size);
- }
- return 0;
-}
-EXPORT_SYMBOL(vlynq_set_remote_mapping);
-
-int vlynq_set_local_irq(struct vlynq_device *dev, int virq)
-{
- int irq = dev->irq_start + virq;
- if (dev->enabled)
- return -EBUSY;
-
- if ((irq < dev->irq_start) || (irq > dev->irq_end))
- return -EINVAL;
-
- if (virq == dev->remote_irq)
- return -EINVAL;
-
- dev->local_irq = virq;
-
- return 0;
-}
-EXPORT_SYMBOL(vlynq_set_local_irq);
-
-int vlynq_set_remote_irq(struct vlynq_device *dev, int virq)
-{
- int irq = dev->irq_start + virq;
- if (dev->enabled)
- return -EBUSY;
-
- if ((irq < dev->irq_start) || (irq > dev->irq_end))
- return -EINVAL;
-
- if (virq == dev->local_irq)
- return -EINVAL;
-
- dev->remote_irq = virq;
-
- return 0;
-}
-EXPORT_SYMBOL(vlynq_set_remote_irq);
-
-static int vlynq_probe(struct platform_device *pdev)
-{
- struct vlynq_device *dev;
- struct resource *regs_res, *mem_res, *irq_res;
- int len, result;
-
- regs_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
- if (!regs_res)
- return -ENODEV;
-
- mem_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
- if (!mem_res)
- return -ENODEV;
-
- irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "devirq");
- if (!irq_res)
- return -ENODEV;
-
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (!dev) {
- printk(KERN_ERR
- "vlynq: failed to allocate device structure\n");
- return -ENOMEM;
- }
-
- dev->id = pdev->id;
- dev->dev.bus = &vlynq_bus_type;
- dev->dev.parent = &pdev->dev;
- snprintf(dev->dev.bus_id, BUS_ID_SIZE, "vlynq%d", dev->id);
- dev->dev.bus_id[BUS_ID_SIZE - 1] = 0;
- dev->dev.platform_data = pdev->dev.platform_data;
- dev->dev.release = vlynq_device_release;
-
- dev->regs_start = regs_res->start;
- dev->regs_end = regs_res->end;
- dev->mem_start = mem_res->start;
- dev->mem_end = mem_res->end;
-
- len = regs_res->end - regs_res->start;
- if (!request_mem_region(regs_res->start, len, dev->dev.bus_id)) {
- printk(KERN_ERR "%s: Can't request vlynq registers\n",
- dev->dev.bus_id);
- result = -ENXIO;
- goto fail_request;
- }
-
- dev->local = ioremap(regs_res->start, len);
- if (!dev->local) {
- printk(KERN_ERR "%s: Can't remap vlynq registers\n",
- dev->dev.bus_id);
- result = -ENXIO;
- goto fail_remap;
- }
-
- dev->remote = (struct vlynq_regs *)((void *)dev->local +
- VLYNQ_REMOTE_OFFSET);
-
- dev->irq = platform_get_irq_byname(pdev, "irq");
- dev->irq_start = irq_res->start;
- dev->irq_end = irq_res->end;
- dev->local_irq = dev->irq_end - dev->irq_start;
- dev->remote_irq = dev->local_irq - 1;
-
- if (device_register(&dev->dev))
- goto fail_register;
- platform_set_drvdata(pdev, dev);
-
- printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
- dev->dev.bus_id, (void *)dev->regs_start, dev->irq,
- (void *)dev->mem_start);
-
- dev->dev_id = 0;
- dev->divisor = vlynq_div_auto;
- result = __vlynq_enable_device(dev);
- if (result == 0) {
- dev->dev_id = vlynq_reg_read(dev->remote->chip);
- ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev);
- }
- if (dev->dev_id)
- printk(KERN_INFO "Found a VLYNQ device: %08x\n", dev->dev_id);
-
- return 0;
-
-fail_register:
- iounmap(dev->local);
-fail_remap:
-fail_request:
- release_mem_region(regs_res->start, len);
- kfree(dev);
- return result;
-}
-
-static int vlynq_remove(struct platform_device *pdev)
-{
- struct vlynq_device *dev = platform_get_drvdata(pdev);
-
- device_unregister(&dev->dev);
- iounmap(dev->local);
- release_mem_region(dev->regs_start, dev->regs_end - dev->regs_start);
-
- kfree(dev);
-
- return 0;
-}
-
-static struct platform_driver vlynq_platform_driver = {
- .driver.name = "vlynq",
- .probe = vlynq_probe,
- .remove = __devexit_p(vlynq_remove),
-};
-
-struct bus_type vlynq_bus_type = {
- .name = "vlynq",
- .match = vlynq_device_match,
- .probe = vlynq_device_probe,
- .remove = vlynq_device_remove,
-};
-EXPORT_SYMBOL(vlynq_bus_type);
-
-static int __devinit vlynq_init(void)
-{
- int res = 0;
-
- res = bus_register(&vlynq_bus_type);
- if (res)
- goto fail_bus;
-
- res = platform_driver_register(&vlynq_platform_driver);
- if (res)
- goto fail_platform;
-
- return 0;
-
-fail_platform:
- bus_unregister(&vlynq_bus_type);
-fail_bus:
- return res;
-}
-
-static void __devexit vlynq_exit(void)
-{
- platform_driver_unregister(&vlynq_platform_driver);
- bus_unregister(&vlynq_bus_type);
-}
-
-module_init(vlynq_init);
-module_exit(vlynq_exit);
diff --git a/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/ar7.h b/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/ar7.h
deleted file mode 100644
index f37e82f5cb..0000000000
--- a/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/ar7.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __AR7_H__
-#define __AR7_H__
-
-#include <linux/delay.h>
-#include <asm/addrspace.h>
-#include <linux/io.h>
-
-#define AR7_REGS_BASE 0x08610000
-
-#define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000)
-#define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900)
-/* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */
-#define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00)
-#define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00)
-#define AR7_REGS_USB (AR7_REGS_BASE + 0x1200)
-#define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600)
-#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800)
-#define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00)
-#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00)
-#define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00)
-#define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400)
-#define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800)
-
-#define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00)
-#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00)
-#define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00)
-
-#define TITAN_REGS_ESWITCH_BASE (0x08640000)
-#define TITAN_REGS_MAC0 (TITAN_REGS_ESWITCH_BASE + 0)
-#define TITAN_REGS_MAC1 (TITAN_REGS_ESWITCH_BASE + 0x0800)
-#define TITAN_REGS_MDIO (TITAN_REGS_ESWITCH_BASE + 0x02000)
-#define TITAN_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1c00)
-#define TITAN_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1300)
-
-#define AR7_RESET_PEREPHERIAL 0x0
-#define AR7_RESET_SOFTWARE 0x4
-#define AR7_RESET_STATUS 0x8
-
-#define AR7_RESET_BIT_CPMAC_LO 17
-#define AR7_RESET_BIT_CPMAC_HI 21
-#define AR7_RESET_BIT_MDIO 22
-#define AR7_RESET_BIT_EPHY 26
-
-#define TITAN_RESET_BIT_EPHY1 28
-
-/* GPIO control registers */
-#define AR7_GPIO_INPUT 0x0
-#define AR7_GPIO_OUTPUT 0x4
-#define AR7_GPIO_DIR 0x8
-#define AR7_GPIO_ENABLE 0xc
-#define TITAN_GPIO_INPUT_0 0x0
-#define TITAN_GPIO_INPUT_1 0x4
-#define TITAN_GPIO_OUTPUT_0 0x8
-#define TITAN_GPIO_OUTPUT_1 0xc
-#define TITAN_GPIO_DIR_0 0x10
-#define TITAN_GPIO_DIR_1 0x14
-#define TITAN_GPIO_ENBL_0 0x18
-#define TITAN_GPIO_ENBL_1 0x1c
-
-#define AR7_CHIP_7100 0x18
-#define AR7_CHIP_7200 0x2b
-#define AR7_CHIP_7300 0x05
-#define AR7_CHIP_TITAN 0x07
-#define TITAN_CHIP_1050 0x0f
-#define TITAN_CHIP_1055 0x0e
-#define TITAN_CHIP_1056 0x0d
-#define TITAN_CHIP_1060 0x07
-
-/* Interrupts */
-#define AR7_IRQ_UART0 15
-#define AR7_IRQ_UART1 16
-
-/* Clocks */
-#define AR7_AFE_CLOCK 35328000
-#define AR7_REF_CLOCK 25000000
-#define AR7_XTAL_CLOCK 24000000
-
-struct plat_cpmac_data {
- int reset_bit;
- int power_bit;
- u32 phy_mask;
- char dev_addr[6];
-};
-
-struct plat_dsl_data {
- int reset_bit_dsl;
- int reset_bit_sar;
-};
-
-extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock;
-
-static inline int ar7_is_titan(void)
-{
- return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) ==
- AR7_CHIP_TITAN;
-}
-
-static inline u16 ar7_chip_id(void)
-{
- return ar7_is_titan() ? AR7_CHIP_TITAN : (readl((void *)
- KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff);
-}
-
-static inline u8 ar7_chip_rev(void)
-{
- return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + (ar7_is_titan() ? 0x24 :
- 0x14))) >> 16) & 0xff;
-}
-
-static inline int ar7_cpu_freq(void)
-{
- return ar7_cpu_clock;
-}
-
-static inline int ar7_bus_freq(void)
-{
- return ar7_bus_clock;
-}
-
-static inline int ar7_vbus_freq(void)
-{
- return ar7_bus_clock / 2;
-}
-#define ar7_cpmac_freq ar7_vbus_freq
-
-static inline int ar7_dsp_freq(void)
-{
- return ar7_dsp_clock;
-}
-
-static inline int ar7_has_high_cpmac(void)
-{
- u16 chip_id = ar7_chip_id();
- switch (chip_id) {
- case AR7_CHIP_7100:
- case AR7_CHIP_7200:
- return 0;
- default:
- return 1;
- }
-}
-#define ar7_has_high_vlynq ar7_has_high_cpmac
-#define ar7_has_second_uart ar7_has_high_cpmac
-
-static inline void ar7_device_enable(u32 bit)
-{
- void *reset_reg =
- (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
- writel(readl(reset_reg) | (1 << bit), reset_reg);
- mdelay(20);
-}
-
-static inline void ar7_device_disable(u32 bit)
-{
- void *reset_reg =
- (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
- writel(readl(reset_reg) & ~(1 << bit), reset_reg);
- mdelay(20);
-}
-
-static inline void ar7_device_reset(u32 bit)
-{
- ar7_device_disable(bit);
- ar7_device_enable(bit);
-}
-
-static inline void ar7_device_on(u32 bit)
-{
- void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
- writel(readl(power_reg) | (1 << bit), power_reg);
- mdelay(20);
-}
-
-static inline void ar7_device_off(u32 bit)
-{
- void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
- writel(readl(power_reg) & ~(1 << bit), power_reg);
- mdelay(20);
-}
-
-#endif /* __AR7_H__ */
diff --git a/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/gpio.h b/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/gpio.h
deleted file mode 100644
index fde93bc7c0..0000000000
--- a/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/gpio.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __AR7_GPIO_H__
-#define __AR7_GPIO_H__
-#include <asm/ar7/ar7.h>
-#ifndef __AR7_TITAN_H__
-#include <asm/ar7/titan.h>
-#endif
-
-#define AR7_GPIO_MAX 32
-#define TITAN_GPIO_MAX 51
-
-extern int gpio_request(unsigned gpio, const char *label);
-extern void gpio_free(unsigned gpio);
-
-/* Common GPIO layer */
-static inline int gpio_get_value_ar7(unsigned gpio)
-{
- void __iomem *gpio_in =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT);
-
- return readl(gpio_in) & (1 << gpio);
-}
-
-static inline int gpio_get_value_titan(unsigned gpio)
-{
- void __iomem *gpio_in0 =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + TITAN_GPIO_INPUT_0);
- void __iomem *gpio_in1 =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + TITAN_GPIO_INPUT_1);
-
- return readl(gpio >> 5 ? gpio_in1 : gpio_in0) & (1 << (gpio & 0x1f));
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return ar7_is_titan() ? gpio_get_value_titan(gpio) :
- gpio_get_value_ar7(gpio);
-}
-
-static inline void gpio_set_value_ar7(unsigned gpio, int value)
-{
- void __iomem *gpio_out =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT);
- unsigned tmp;
-
- tmp = readl(gpio_out) & ~(1 << gpio);
- if (value)
- tmp |= 1 << gpio;
- writel(tmp, gpio_out);
-}
-
-static inline void gpio_set_value_titan(unsigned gpio, int value)
-{
- void __iomem *gpio_out0 =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + TITAN_GPIO_OUTPUT_0);
- void __iomem *gpio_out1 =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + TITAN_GPIO_OUTPUT_1);
- unsigned tmp;
-
- tmp = readl(gpio >> 5 ? gpio_out1 : gpio_out0) & ~(1 << (gpio & 0x1f));
- if (value)
- tmp |= 1 << (gpio & 0x1f);
- writel(tmp, gpio >> 5 ? gpio_out1 : gpio_out0);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- if (ar7_is_titan())
- gpio_set_value_titan(gpio, value);
- else
- gpio_set_value_ar7(gpio, value);
-}
-
-static inline int gpio_direction_input_ar7(unsigned gpio)
-{
- void __iomem *gpio_dir =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
-
- if (gpio >= AR7_GPIO_MAX)
- return -EINVAL;
-
- writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
-
- return 0;
-}
-
-static inline int gpio_direction_input_titan(unsigned gpio)
-{
- void __iomem *gpio_dir0 =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + TITAN_GPIO_DIR_0);
- void __iomem *gpio_dir1 =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + TITAN_GPIO_DIR_1);
-
- if (gpio >= TITAN_GPIO_MAX)
- return -EINVAL;
-
- writel(readl(gpio >> 5 ? gpio_dir1 : gpio_dir0) | (1 << (gpio & 0x1f)),
- gpio >> 5 ? gpio_dir1 : gpio_dir0);
-
- return 0;
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- return ar7_is_titan() ? gpio_direction_input_titan(gpio) :
- gpio_direction_input_ar7(gpio);
-}
-
-static inline int gpio_direction_output_ar7(unsigned gpio, int value)
-{
- void __iomem *gpio_dir =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
-
- if (gpio >= AR7_GPIO_MAX)
- return -EINVAL;
-
- gpio_set_value(gpio, value);
- writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
-
- return 0;
-}
-
-static inline int gpio_direction_output_titan(unsigned gpio, int value)
-{
- void __iomem *gpio_dir0 =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + TITAN_GPIO_DIR_0);
- void __iomem *gpio_dir1 =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + TITAN_GPIO_DIR_1);
-
- if (gpio >= TITAN_GPIO_MAX)
- return -EINVAL;
-
- gpio_set_value_titan(gpio, value);
- writel(readl(gpio >> 5 ? gpio_dir1 : gpio_dir0) & ~(1 <<
- (gpio & 0x1f)), gpio >> 5 ? gpio_dir1 : gpio_dir0);
-
- return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- return ar7_is_titan() ? gpio_direction_output_titan(gpio, value) :
- gpio_direction_output_ar7(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return -EINVAL;
-}
-
-/* Board specific GPIO functions */
-static inline int ar7_gpio_enable_ar7(unsigned gpio)
-{
- void __iomem *gpio_en =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
-
- writel(readl(gpio_en) | (1 << gpio), gpio_en);
-
- return 0;
-}
-
-static inline int ar7_gpio_enable_titan(unsigned gpio)
-{
- void __iomem *gpio_en0 =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + TITAN_GPIO_ENBL_0);
- void __iomem *gpio_en1 =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + TITAN_GPIO_ENBL_1);
-
- writel(readl(gpio >> 5 ? gpio_en1 : gpio_en0) | (1 << (gpio & 0x1f)),
- gpio >> 5 ? gpio_en1 : gpio_en0);
-
- return 0;
-}
-
-static inline int ar7_gpio_enable(unsigned gpio)
-{
- return ar7_is_titan() ? ar7_gpio_enable_titan(gpio) :
- ar7_gpio_enable_ar7(gpio);
-}
-
-static inline int ar7_gpio_disable_ar7(unsigned gpio)
-{
- void __iomem *gpio_en =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
-
- writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
-
- return 0;
-}
-
-static inline int ar7_gpio_disable_titan(unsigned gpio)
-{
- void __iomem *gpio_en0 =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + TITAN_GPIO_ENBL_0);
- void __iomem *gpio_en1 =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + TITAN_GPIO_ENBL_1);
-
- writel(readl(gpio >> 5 ? gpio_en1 : gpio_en0) & ~(1 << (gpio & 0x1f)),
- gpio >> 5 ? gpio_en1 : gpio_en0);
-
- return 0;
-}
-
-static inline int ar7_gpio_disable(unsigned gpio)
-{
- return ar7_is_titan() ? ar7_gpio_disable_titan(gpio) :
- ar7_gpio_disable_ar7(gpio);
-}
-
-static inline int ar7_init_titan_variant( void )
-{
- /*UINT32 new_val;*/
- unsigned new_val;
-
- /* set GPIO 44 - 47 as input */
- /*PAL_sysGpioCtrl(const int, GPIO_PIN, GPIO_INPUT_PIN); */
- /*define titan_gpio_ctrl in titan.h*/
- titan_gpio_ctrl(44, GPIO_PIN, GPIO_INPUT_PIN);
- titan_gpio_ctrl(45, GPIO_PIN, GPIO_INPUT_PIN);
- titan_gpio_ctrl(46, GPIO_PIN, GPIO_INPUT_PIN);
- titan_gpio_ctrl(47, GPIO_PIN, GPIO_INPUT_PIN);
-
- /* read GPIO to get Titan variant type */
- /*fix this*/
- titan_sysGpioInValue( &new_val, 1 );
-
- new_val >>= 12;
- new_val &= 0x0f;
-
- switch ( new_val )
- {
- case TITAN_CHIP_1050:
- case TITAN_CHIP_1055:
- case TITAN_CHIP_1056:
- case TITAN_CHIP_1060:
- return new_val;
-
- default:
- break;
- }
- /* In case we get an invalid value, return the default Titan chip */
- return TITAN_CHIP_1050;
-}
-
-#include <asm-generic/gpio.h>
-
-#endif
diff --git a/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/irq.h b/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/irq.h
deleted file mode 100644
index 39e9757e3d..0000000000
--- a/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/irq.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Shamelessly copied from asm-mips/mach-emma2rh/
- * Copyright (C) 2003 by Ralf Baechle
- */
-#ifndef __ASM_AR7_IRQ_H
-#define __ASM_AR7_IRQ_H
-
-#define NR_IRQS 256
-
-#include_next <irq.h>
-
-#endif /* __ASM_AR7_IRQ_H */
diff --git a/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/prom.h b/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/prom.h
deleted file mode 100644
index 55f5939db5..0000000000
--- a/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/prom.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2006, 2007 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __PROM_H__
-#define __PROM_H__
-
-extern char *prom_getenv(const char *name);
-extern void prom_printf(const char *fmt, ...) __attribute__((format(printf, 1, 2)));
-extern void prom_meminit(void);
-
-#endif /* __PROM_H__ */
diff --git a/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/spaces.h b/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/spaces.h
deleted file mode 100644
index f4d1237925..0000000000
--- a/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/spaces.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
- * Copyright (C) 2000, 2002 Maciej W. Rozycki
- * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
- */
-#ifndef _ASM_AR7_SPACES_H
-#define _ASM_AR7_SPACES_H
-
-#define CAC_BASE 0x80000000
-#define IO_BASE 0xa0000000
-#define UNCAC_BASE 0xa0000000
-#define MAP_BASE 0xc0000000
-
-/*
- * This handles the memory map.
- * We handle pages at KSEG0 for kernels with 32 bit address space.
- */
-#define PAGE_OFFSET 0x94000000UL
-#define PHYS_OFFSET 0x14000000UL
-
-/*
- * Memory above this physical address will be considered highmem.
- */
-#ifndef HIGHMEM_START
-#define HIGHMEM_START 0x40000000UL
-#endif
-
-#endif /* __ASM_AR7_SPACES_H */
diff --git a/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/titan.h b/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/titan.h
deleted file mode 100644
index 0c2a51fdef..0000000000
--- a/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/titan.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 2008 Stanley Pinchak <stanley_dot_pinchak_at_gmail_dot_com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#ifndef __AR7_TITAN_H__
-#define __AR7_TITAN_H__
-
-#ifndef __AR7_GPIO_H__
-#include <asm/ar7/gpio.h>
-#endif
-
-typedef enum TITAN_GPIO_PIN_MODE_tag
-{
- FUNCTIONAL_PIN = 0,
- GPIO_PIN = 1
-} TITAN_GPIO_PIN_MODE_T;
-
-typedef enum TITAN_GPIO_PIN_DIRECTION_tag
-{
- GPIO_OUTPUT_PIN = 0,
- GPIO_INPUT_PIN = 1
-} TITAN_GPIO_PIN_DIRECTION_T;
-
-/**********************************************************************
- * GPIO Control
- **********************************************************************/
-
-typedef struct
-{
- int pinSelReg;
- int shift;
- int func;
-
-} GPIO_CFG;
-
-static GPIO_CFG gptable[]= {
- /* PIN_SEL_REG, START_BIT, GPIO_CFG_MUX_VALUE */
- {4,24,1},
- {4,26,1},
- {4,28,1},
- {4,30,1},
- {5,6,1},
- {5,8,1},
- {5,10,1},
- {5,12,1},
- {7,14,3},
- {7,16,3},
- {7,18,3},
- {7,20,3},
- {7,22,3},
- {7,26,3},
- {7,28,3},
- {7,30,3},
- {8,0,3},
- {8,2,3},
- {8,4,3},
- {8,10,3},
- {8,14,3},
- {8,16,3},
- {8,18,3},
- {8,20,3},
- {9,8,3},
- {9,10,3},
- {9,12,3},
- {9,14,3},
- {9,18,3},
- {9,20,3},
- {9,24,3},
- {9,26,3},
- {9,28,3},
- {9,30,3},
- {10,0,3},
- {10,2,3},
- {10,8,3},
- {10,10,3},
- {10,12,3},
- {10,14,3},
- {13,12,3},
- {13,14,3},
- {13,16,3},
- {13,18,3},
- {13,24,3},
- {13,26,3},
- {13,28,3},
- {13,30,3},
- {14,2,3},
- {14,6,3},
- {14,8,3},
- {14,12,3}
-};
-
-typedef struct
-{
- volatile unsigned int reg[21];
-}
-PIN_SEL_REG_ARRAY_T;
-
-typedef struct
-{
- unsigned int data_in [2];
- unsigned int data_out[2];
- unsigned int dir[2];
- unsigned int enable[2];
-
-} TITAN_GPIO_CONTROL_T;
-
-#define AVALANCHE_PIN_SEL_BASE 0xA861160C /*replace with KSEG1ADDR()*/
-
-static inline int titan_gpio_ctrl(unsigned int gpio_pin, TITAN_GPIO_PIN_MODE_T pin_mode,
- TITAN_GPIO_PIN_DIRECTION_T pin_direction)
-{
- int reg_index = 0;
- int mux_status;
- GPIO_CFG gpio_cfg;
- volatile PIN_SEL_REG_ARRAY_T *pin_sel_array = (PIN_SEL_REG_ARRAY_T*) AVALANCHE_PIN_SEL_BASE;
- volatile TITAN_GPIO_CONTROL_T *gpio_cntl = (TITAN_GPIO_CONTROL_T*) KSEG1ADDR(AR7_REGS_GPIO + TITAN_GPIO_INPUT_0);
-
- if (gpio_pin > 51 )
- return(-1);
-
- gpio_cfg = gptable[gpio_pin];
- mux_status = (pin_sel_array->reg[gpio_cfg.pinSelReg - 1] >> gpio_cfg.shift) & 0x3;
- if(!((mux_status == 0 /* tri-stated */ ) || (mux_status == gpio_cfg.func /*GPIO functionality*/)))
- {
- return(-1); /* Pin have been configured for non GPIO funcs. */
- }
-
- /* Set the pin to be used as GPIO. */
- pin_sel_array->reg[gpio_cfg.pinSelReg - 1] |= ((gpio_cfg.func & 0x3) << gpio_cfg.shift);
-
- /* Check whether gpio refers to the first GPIO reg or second. */
- if(gpio_pin > 31)
- {
- reg_index = 1;
- gpio_pin -= 32;
- }
-
- if(pin_mode)
- gpio_cntl->enable[reg_index] |= (1 << gpio_pin); /* Enable */
- else
- gpio_cntl->enable[reg_index] &= ~(1 << gpio_pin);
-
- if(pin_direction)
- gpio_cntl->dir[reg_index] |= (1 << gpio_pin); /* Input */
- else
- gpio_cntl->dir[reg_index] &= ~(1 << gpio_pin);
-
- return(0);
-
-}/* end of function titan_gpio_ctrl */
-
-static inline int titan_sysGpioInValue(unsigned int *in_val, unsigned int reg_index)
-{
- volatile TITAN_GPIO_CONTROL_T *gpio_cntl = (TITAN_GPIO_CONTROL_T*) KSEG1ADDR(AR7_REGS_GPIO + TITAN_GPIO_INPUT_0);
-
- if(reg_index > 1)
- return (-1);
-
- *in_val = gpio_cntl->data_in[reg_index];
-
- return (0);
-}
-
-
-#endif
diff --git a/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/war.h b/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/war.h
deleted file mode 100644
index 4a2b7986b5..0000000000
--- a/target/linux/ar7/files-2.6.30/include/asm-mips/ar7/war.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_BCM947XX_WAR_H
-#define __ASM_MIPS_MACH_BCM947XX_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define R5432_CP0_INTERRUPT_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define RM9000_CDEX_SMP_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_BCM947XX_WAR_H */
diff --git a/target/linux/ar7/files-2.6.30/include/linux/vlynq.h b/target/linux/ar7/files-2.6.30/include/linux/vlynq.h
deleted file mode 100644
index 8f6a95882b..0000000000
--- a/target/linux/ar7/files-2.6.30/include/linux/vlynq.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Copyright (C) 2006, 2007 Eugene Konev <ejka@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __VLYNQ_H__
-#define __VLYNQ_H__
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/types.h>
-
-#define VLYNQ_NUM_IRQS 32
-
-struct vlynq_mapping {
- u32 size;
- u32 offset;
-};
-
-enum vlynq_divisor {
- vlynq_div_auto = 0,
- vlynq_ldiv1,
- vlynq_ldiv2,
- vlynq_ldiv3,
- vlynq_ldiv4,
- vlynq_ldiv5,
- vlynq_ldiv6,
- vlynq_ldiv7,
- vlynq_ldiv8,
- vlynq_rdiv1,
- vlynq_rdiv2,
- vlynq_rdiv3,
- vlynq_rdiv4,
- vlynq_rdiv5,
- vlynq_rdiv6,
- vlynq_rdiv7,
- vlynq_rdiv8,
- vlynq_div_external
-};
-
-struct vlynq_device_id {
- u32 id;
- enum vlynq_divisor divisor;
- unsigned long driver_data;
-};
-
-struct vlynq_regs;
-struct vlynq_device {
- u32 id, dev_id;
- int local_irq;
- int remote_irq;
- enum vlynq_divisor divisor;
- u32 regs_start, regs_end;
- u32 mem_start, mem_end;
- u32 irq_start, irq_end;
- int irq;
- int enabled;
- struct vlynq_regs *local;
- struct vlynq_regs *remote;
- struct device dev;
-};
-
-struct vlynq_driver {
- char *name;
- struct vlynq_device_id *id_table;
- int (*probe)(struct vlynq_device *dev, struct vlynq_device_id *id);
- void (*remove)(struct vlynq_device *dev);
- struct device_driver driver;
-};
-
-struct plat_vlynq_ops {
- int (*on)(struct vlynq_device *dev);
- void (*off)(struct vlynq_device *dev);
-};
-
-static inline struct vlynq_driver *to_vlynq_driver(struct device_driver *drv)
-{
- return container_of(drv, struct vlynq_driver, driver);
-}
-
-static inline struct vlynq_device *to_vlynq_device(struct device *device)
-{
- return container_of(device, struct vlynq_device, dev);
-}
-
-extern struct bus_type vlynq_bus_type;
-
-extern int __vlynq_register_driver(struct vlynq_driver *driver,
- struct module *owner);
-
-static inline int vlynq_register_driver(struct vlynq_driver *driver)
-{
- return __vlynq_register_driver(driver, THIS_MODULE);
-}
-
-static inline void *vlynq_get_drvdata(struct vlynq_device *dev)
-{
- return dev_get_drvdata(&dev->dev);
-}
-
-static inline void vlynq_set_drvdata(struct vlynq_device *dev, void *data)
-{
- dev_set_drvdata(&dev->dev, data);
-}
-
-static inline u32 vlynq_mem_start(struct vlynq_device *dev)
-{
- return dev->mem_start;
-}
-
-static inline u32 vlynq_mem_end(struct vlynq_device *dev)
-{
- return dev->mem_end;
-}
-
-static inline u32 vlynq_mem_len(struct vlynq_device *dev)
-{
- return dev->mem_end - dev->mem_start + 1;
-}
-
-static inline int vlynq_virq_to_irq(struct vlynq_device *dev, int virq)
-{
- int irq = dev->irq_start + virq;
- if ((irq < dev->irq_start) || (irq > dev->irq_end))
- return -EINVAL;
-
- return irq;
-}
-
-static inline int vlynq_irq_to_virq(struct vlynq_device *dev, int irq)
-{
- if ((irq < dev->irq_start) || (irq > dev->irq_end))
- return -EINVAL;
-
- return irq - dev->irq_start;
-}
-
-extern void vlynq_unregister_driver(struct vlynq_driver *driver);
-extern int vlynq_enable_device(struct vlynq_device *dev);
-extern void vlynq_disable_device(struct vlynq_device *dev);
-extern int vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset,
- struct vlynq_mapping *mapping);
-extern int vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset,
- struct vlynq_mapping *mapping);
-extern int vlynq_set_local_irq(struct vlynq_device *dev, int virq);
-extern int vlynq_set_remote_irq(struct vlynq_device *dev, int virq);
-
-#endif /* __VLYNQ_H__ */
diff --git a/target/linux/ar7/patches-2.6.30/100-board_support.patch b/target/linux/ar7/patches-2.6.30/100-board_support.patch
deleted file mode 100644
index 079f9c0a8c..0000000000
--- a/target/linux/ar7/patches-2.6.30/100-board_support.patch
+++ /dev/null
@@ -1,86 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -19,6 +19,24 @@ choice
- prompt "System type"
- default SGI_IP22
-
-+config AR7
-+ bool "Texas Instruments AR7"
-+ select BOOT_ELF32
-+ select DMA_NONCOHERENT
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select IRQ_CPU
-+ select NO_EXCEPT_FILL
-+ select SWAP_IO_SPACE
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_HAS_EARLY_PRINTK
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_KGDB
-+ select SYS_SUPPORTS_LITTLE_ENDIAN
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select GENERIC_GPIO
-+ select GENERIC_HARDIRQS_NO__DO_IRQ
-+
- config MACH_ALCHEMY
- bool "Alchemy processor based machines"
-
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -1256,9 +1256,22 @@ void *set_except_vector(int n, void *add
-
- exception_handlers[n] = handler;
- if (n == 0 && cpu_has_divec) {
-- *(u32 *)(ebase + 0x200) = 0x08000000 |
-- (0x03ffffff & (handler >> 2));
-- local_flush_icache_range(ebase + 0x200, ebase + 0x204);
-+ if ((handler ^ (ebase + 4)) & 0xfc000000) {
-+ /* lui k0, 0x0000 */
-+ *(u32 *)(ebase + 0x200) = 0x3c1a0000 | (handler >> 16);
-+ /* ori k0, 0x0000 */
-+ *(u32 *)(ebase + 0x204) =
-+ 0x375a0000 | (handler & 0xffff);
-+ /* jr k0 */
-+ *(u32 *)(ebase + 0x208) = 0x03400008;
-+ /* nop */
-+ *(u32 *)(ebase + 0x20C) = 0x00000000;
-+ flush_icache_range(ebase + 0x200, ebase + 0x210);
-+ } else {
-+ *(u32 *)(ebase + 0x200) =
-+ 0x08000000 | (0x03ffffff & (handler >> 2));
-+ flush_icache_range(ebase + 0x200, ebase + 0x204);
-+ }
- }
- return (void *)old_handler;
- }
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -174,6 +174,13 @@ libs-$(CONFIG_SIBYTE_CFE) += arch/mips/s
- #
-
- #
-+# Texas Instruments AR7
-+#
-+core-$(CONFIG_AR7) += arch/mips/ar7/
-+cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7
-+load-$(CONFIG_AR7) += 0xffffffff94100000
-+
-+#
- # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
- #
- core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
---- a/arch/mips/include/asm/page.h
-+++ b/arch/mips/include/asm/page.h
-@@ -185,8 +185,10 @@ typedef struct { unsigned long pgprot; }
- #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
--#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE)
--#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET)
-+#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \
-+ PHYS_OFFSET)
-+#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \
-+ PHYS_OFFSET)
-
- #include <asm-generic/memory_model.h>
- #include <asm-generic/page.h>
diff --git a/target/linux/ar7/patches-2.6.30/110-flash.patch b/target/linux/ar7/patches-2.6.30/110-flash.patch
deleted file mode 100644
index 7311a67349..0000000000
--- a/target/linux/ar7/patches-2.6.30/110-flash.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/mtd/maps/physmap.c
-+++ b/drivers/mtd/maps/physmap.c
-@@ -80,7 +80,7 @@ static const char *rom_probe_types[] = {
- "map_rom",
- NULL };
- #ifdef CONFIG_MTD_PARTITIONS
--static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
-+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL };
- #endif
-
- static int physmap_flash_probe(struct platform_device *dev)
diff --git a/target/linux/ar7/patches-2.6.30/120-gpio_chrdev.patch b/target/linux/ar7/patches-2.6.30/120-gpio_chrdev.patch
deleted file mode 100644
index fa61e5ccf5..0000000000
--- a/target/linux/ar7/patches-2.6.30/120-gpio_chrdev.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -974,6 +974,15 @@ config MWAVE
- To compile this driver as a module, choose M here: the
- module will be called mwave.
-
-+config AR7_GPIO
-+ tristate "TI AR7 GPIO Support"
-+ depends on AR7
-+ help
-+ Give userspace access to the GPIO pins on the Texas Instruments AR7
-+ processors.
-+
-+ If compiled as a module, it will be called ar7_gpio.
-+
- config SCx200_GPIO
- tristate "NatSemi SCx200 GPIO Support"
- depends on SCx200
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -90,6 +90,7 @@ obj-$(CONFIG_HW_RANDOM) += hw_random/
- obj-$(CONFIG_PPDEV) += ppdev.o
- obj-$(CONFIG_NWBUTTON) += nwbutton.o
- obj-$(CONFIG_NWFLASH) += nwflash.o
-+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o
- obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
- obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
- obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
diff --git a/target/linux/ar7/patches-2.6.30/130-vlynq.patch b/target/linux/ar7/patches-2.6.30/130-vlynq.patch
deleted file mode 100644
index 12eb538466..0000000000
--- a/target/linux/ar7/patches-2.6.30/130-vlynq.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/Kconfig
-+++ b/drivers/Kconfig
-@@ -104,6 +104,8 @@ source "drivers/auxdisplay/Kconfig"
-
- source "drivers/uio/Kconfig"
-
-+source "drivers/vlynq/Kconfig"
-+
- source "drivers/xen/Kconfig"
-
- source "drivers/staging/Kconfig"
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -103,6 +103,7 @@ obj-$(CONFIG_DCA) += dca/
- obj-$(CONFIG_HID) += hid/
- obj-$(CONFIG_PPC_PS3) += ps3/
- obj-$(CONFIG_OF) += of/
-+obj-$(CONFIG_VLYNQ) += vlynq/
- obj-$(CONFIG_SSB) += ssb/
- obj-$(CONFIG_VIRTIO) += virtio/
- obj-$(CONFIG_STAGING) += staging/
diff --git a/target/linux/ar7/patches-2.6.30/131-vlynq_fixes.patch b/target/linux/ar7/patches-2.6.30/131-vlynq_fixes.patch
deleted file mode 100644
index 1f11627d61..0000000000
--- a/target/linux/ar7/patches-2.6.30/131-vlynq_fixes.patch
+++ /dev/null
@@ -1,548 +0,0 @@
---- a/drivers/vlynq/vlynq.c
-+++ b/drivers/vlynq/vlynq.c
-@@ -14,6 +14,9 @@
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+ *
-+ * Parts of the VLYNQ specification can be found here:
-+ * http://www.ti.com/litv/pdf/sprue36a
- */
-
- #include <linux/init.h>
-@@ -25,7 +28,6 @@
- #include <linux/errno.h>
- #include <linux/platform_device.h>
- #include <linux/interrupt.h>
--#include <linux/device.h>
- #include <linux/delay.h>
- #include <linux/io.h>
-
-@@ -73,15 +75,11 @@ struct vlynq_regs {
- u32 int_device[8];
- };
-
--#define vlynq_reg_read(reg) readl(&(reg))
--#define vlynq_reg_write(reg, val) writel(val, &(reg))
--
--static int __vlynq_enable_device(struct vlynq_device *dev);
--
--#ifdef VLYNQ_DEBUG
-+#ifdef CONFIG_VLYNQ_DEBUG
- static void vlynq_dump_regs(struct vlynq_device *dev)
- {
- int i;
-+
- printk(KERN_DEBUG "VLYNQ local=%p remote=%p\n",
- dev->local, dev->remote);
- for (i = 0; i < 32; i++) {
-@@ -95,20 +93,23 @@ static void vlynq_dump_regs(struct vlynq
- static void vlynq_dump_mem(u32 *base, int count)
- {
- int i;
-+
- for (i = 0; i < (count + 3) / 4; i++) {
-- if (i % 4 == 0) printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4);
-+ if (i % 4 == 0)
-+ printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4);
- printk(KERN_DEBUG " 0x%08x", *(base + i));
- }
- printk(KERN_DEBUG "\n");
- }
- #endif
-
--int vlynq_linked(struct vlynq_device *dev)
-+/* Check the VLYNQ link status with a given device */
-+static int vlynq_linked(struct vlynq_device *dev)
- {
- int i;
-
- for (i = 0; i < 100; i++)
-- if (vlynq_reg_read(dev->local->status) & VLYNQ_STATUS_LINK)
-+ if (readl(&dev->local->status) & VLYNQ_STATUS_LINK)
- return 1;
- else
- cpu_relax();
-@@ -118,17 +119,15 @@ int vlynq_linked(struct vlynq_device *de
-
- static void vlynq_reset(struct vlynq_device *dev)
- {
-- vlynq_reg_write(dev->local->control,
-- vlynq_reg_read(dev->local->control) |
-- VLYNQ_CTRL_RESET);
-+ writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET,
-+ &dev->local->control);
-
- /* Wait for the devices to finish resetting */
- msleep(5);
-
- /* Remove reset bit */
-- vlynq_reg_write(dev->local->control,
-- vlynq_reg_read(dev->local->control) &
-- ~VLYNQ_CTRL_RESET);
-+ writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET,
-+ &dev->local->control);
-
- /* Give some time for the devices to settle */
- msleep(5);
-@@ -142,9 +141,9 @@ static void vlynq_irq_unmask(unsigned in
-
- BUG_ON(!dev);
- virq = irq - dev->irq_start;
-- val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
-+ val = readl(&dev->remote->int_device[virq >> 2]);
- val |= (VINT_ENABLE | virq) << VINT_OFFSET(virq);
-- vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
-+ writel(val, &dev->remote->int_device[virq >> 2]);
- }
-
- static void vlynq_irq_mask(unsigned int irq)
-@@ -155,9 +154,9 @@ static void vlynq_irq_mask(unsigned int
-
- BUG_ON(!dev);
- virq = irq - dev->irq_start;
-- val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
-+ val = readl(&dev->remote->int_device[virq >> 2]);
- val &= ~(VINT_ENABLE << VINT_OFFSET(virq));
-- vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
-+ writel(val, &dev->remote->int_device[virq >> 2]);
- }
-
- static int vlynq_irq_type(unsigned int irq, unsigned int flow_type)
-@@ -168,7 +167,7 @@ static int vlynq_irq_type(unsigned int i
-
- BUG_ON(!dev);
- virq = irq - dev->irq_start;
-- val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
-+ val = readl(&dev->remote->int_device[virq >> 2]);
- switch (flow_type & IRQ_TYPE_SENSE_MASK) {
- case IRQ_TYPE_EDGE_RISING:
- case IRQ_TYPE_EDGE_FALLING:
-@@ -187,28 +186,30 @@ static int vlynq_irq_type(unsigned int i
- default:
- return -EINVAL;
- }
-- vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
-+ writel(val, &dev->remote->int_device[virq >> 2]);
- return 0;
- }
-
- static void vlynq_local_ack(unsigned int irq)
- {
- struct vlynq_device *dev = get_irq_chip_data(irq);
-- u32 status = vlynq_reg_read(dev->local->status);
-- if (printk_ratelimit())
-- printk(KERN_DEBUG "%s: local status: 0x%08x\n",
-- dev->dev.bus_id, status);
-- vlynq_reg_write(dev->local->status, status);
-+
-+ u32 status = readl(&dev->local->status);
-+
-+ pr_debug("%s: local status: 0x%08x\n",
-+ dev_name(&dev->dev), status);
-+ writel(status, &dev->local->status);
- }
-
- static void vlynq_remote_ack(unsigned int irq)
- {
- struct vlynq_device *dev = get_irq_chip_data(irq);
-- u32 status = vlynq_reg_read(dev->remote->status);
-- if (printk_ratelimit())
-- printk(KERN_DEBUG "%s: remote status: 0x%08x\n",
-- dev->dev.bus_id, status);
-- vlynq_reg_write(dev->remote->status, status);
-+
-+ u32 status = readl(&dev->remote->status);
-+
-+ pr_debug("%s: remote status: 0x%08x\n",
-+ dev_name(&dev->dev), status);
-+ writel(status, &dev->remote->status);
- }
-
- static irqreturn_t vlynq_irq(int irq, void *dev_id)
-@@ -217,8 +218,8 @@ static irqreturn_t vlynq_irq(int irq, vo
- u32 status;
- int virq = 0;
-
-- status = vlynq_reg_read(dev->local->int_status);
-- vlynq_reg_write(dev->local->int_status, status);
-+ status = readl(&dev->local->int_status);
-+ writel(status, &dev->local->int_status);
-
- if (unlikely(!status))
- spurious_interrupt();
-@@ -262,28 +263,28 @@ static int vlynq_setup_irq(struct vlynq_
- if (dev->local_irq == dev->remote_irq) {
- printk(KERN_ERR
- "%s: local vlynq irq should be different from remote\n",
-- dev->dev.bus_id);
-+ dev_name(&dev->dev));
- return -EINVAL;
- }
-
- /* Clear local and remote error bits */
-- vlynq_reg_write(dev->local->status, vlynq_reg_read(dev->local->status));
-- vlynq_reg_write(dev->remote->status,
-- vlynq_reg_read(dev->remote->status));
-+ writel(readl(&dev->local->status), &dev->local->status);
-+ writel(readl(&dev->remote->status), &dev->remote->status);
-
- /* Now setup interrupts */
- val = VLYNQ_CTRL_INT_VECTOR(dev->local_irq);
- val |= VLYNQ_CTRL_INT_ENABLE | VLYNQ_CTRL_INT_LOCAL |
- VLYNQ_CTRL_INT2CFG;
-- val |= vlynq_reg_read(dev->local->control);
-- vlynq_reg_write(dev->local->int_ptr, VLYNQ_INT_OFFSET);
-- vlynq_reg_write(dev->local->control, val);
-+ val |= readl(&dev->local->control);
-+ writel(VLYNQ_INT_OFFSET, &dev->local->int_ptr);
-+ writel(val, &dev->local->control);
-
- val = VLYNQ_CTRL_INT_VECTOR(dev->remote_irq);
- val |= VLYNQ_CTRL_INT_ENABLE;
-- val |= vlynq_reg_read(dev->remote->control);
-- vlynq_reg_write(dev->remote->int_ptr, VLYNQ_INT_OFFSET);
-- vlynq_reg_write(dev->remote->control, val);
-+ val |= readl(&dev->remote->control);
-+ writel(VLYNQ_INT_OFFSET, &dev->remote->int_ptr);
-+ writel(val, &dev->remote->int_ptr);
-+ writel(val, &dev->remote->control);
-
- for (i = dev->irq_start; i <= dev->irq_end; i++) {
- virq = i - dev->irq_start;
-@@ -299,12 +300,13 @@ static int vlynq_setup_irq(struct vlynq_
- set_irq_chip_and_handler(i, &vlynq_irq_chip,
- handle_simple_irq);
- set_irq_chip_data(i, dev);
-- vlynq_reg_write(dev->remote->int_device[virq >> 2], 0);
-+ writel(0, &dev->remote->int_device[virq >> 2]);
- }
- }
-
- if (request_irq(dev->irq, vlynq_irq, IRQF_SHARED, "vlynq", dev)) {
-- printk(KERN_ERR "%s: request_irq failed\n", dev->dev.bus_id);
-+ printk(KERN_ERR "%s: request_irq failed\n",
-+ dev_name(&dev->dev));
- return -EAGAIN;
- }
-
-@@ -328,11 +330,11 @@ static int vlynq_device_match(struct dev
- if (ids->id == vdev->dev_id) {
- vdev->divisor = ids->divisor;
- vlynq_set_drvdata(vdev, ids);
-- printk(KERN_INFO "Driver found for VLYNQ " \
-+ printk(KERN_INFO "Driver found for VLYNQ "
- "device: %08x\n", vdev->dev_id);
- return 1;
- }
-- printk(KERN_DEBUG "Not using the %08x VLYNQ device's driver" \
-+ printk(KERN_DEBUG "Not using the %08x VLYNQ device's driver"
- " for VLYNQ device: %08x\n", ids->id, vdev->dev_id);
- ids++;
- }
-@@ -346,8 +348,7 @@ static int vlynq_device_probe(struct dev
- struct vlynq_device_id *id = vlynq_get_drvdata(vdev);
- int result = -ENODEV;
-
-- get_device(dev);
-- if (drv && drv->probe)
-+ if (drv->probe)
- result = drv->probe(vdev, id);
- if (result)
- put_device(dev);
-@@ -357,9 +358,10 @@ static int vlynq_device_probe(struct dev
- static int vlynq_device_remove(struct device *dev)
- {
- struct vlynq_driver *drv = to_vlynq_driver(dev->driver);
-- if (drv && drv->remove)
-+
-+ if (drv->remove)
- drv->remove(to_vlynq_device(dev));
-- put_device(dev);
-+
- return 0;
- }
-
-@@ -377,6 +379,14 @@ void vlynq_unregister_driver(struct vlyn
- }
- EXPORT_SYMBOL(vlynq_unregister_driver);
-
-+/*
-+ * A VLYNQ remote device can clock the VLYNQ bus master
-+ * using a dedicated clock line. In that case, both the
-+ * remove device and the bus master should have the same
-+ * serial clock dividers configured. Iterate through the
-+ * 8 possible dividers until we actually link with the
-+ * device.
-+ */
- static int __vlynq_try_remote(struct vlynq_device *dev)
- {
- int i;
-@@ -389,21 +399,21 @@ static int __vlynq_try_remote(struct vly
- if (!vlynq_linked(dev))
- break;
-
-- vlynq_reg_write(dev->remote->control,
-- (vlynq_reg_read(dev->remote->control) &
-+ writel((readl(&dev->remote->control) &
- ~VLYNQ_CTRL_CLOCK_MASK) |
- VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1));
-- vlynq_reg_write(dev->local->control,
-- ((vlynq_reg_read(dev->local->control)
-+ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
-+ &dev->remote->control);
-+ writel((readl(&dev->local->control)
- & ~(VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_MASK)) |
-- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1)));
-+ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
-+ &dev->local->control);
-
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
- "%s: using remote clock divisor %d\n",
-- dev->dev.bus_id, i - vlynq_rdiv1 + 1);
-+ dev_name(&dev->dev), i - vlynq_rdiv1 + 1);
- dev->divisor = i;
- return 0;
- } else {
-@@ -414,26 +424,33 @@ static int __vlynq_try_remote(struct vly
- return -ENODEV;
- }
-
-+/*
-+ * A VLYNQ remote device can be clocked by the VLYNQ bus
-+ * master using a dedicated clock line. In that case, only
-+ * the bus master configures the serial clock divider.
-+ * Iterate through the 8 possible dividers until we
-+ * actually get a link with the device.
-+ */
- static int __vlynq_try_local(struct vlynq_device *dev)
- {
- int i;
--
-+
- vlynq_reset(dev);
-
- for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
- i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
- dev->dev_id ? i++ : i--) {
-
-- vlynq_reg_write(dev->local->control,
-- (vlynq_reg_read(dev->local->control) &
-+ writel((readl(&dev->local->control) &
- ~VLYNQ_CTRL_CLOCK_MASK) |
- VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1));
-+ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1),
-+ &dev->local->control);
-
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
- "%s: using local clock divisor %d\n",
-- dev->dev.bus_id, i - vlynq_ldiv1 + 1);
-+ dev_name(&dev->dev), i - vlynq_ldiv1 + 1);
- dev->divisor = i;
- return 0;
- } else {
-@@ -444,27 +461,33 @@ static int __vlynq_try_local(struct vlyn
- return -ENODEV;
- }
-
-+/*
-+ * When using external clocking method, serial clock
-+ * is supplied by an external oscillator, therefore we
-+ * should mask the local clock bit in the clock control
-+ * register for both the bus master and the remote device.
-+ */
- static int __vlynq_try_external(struct vlynq_device *dev)
- {
- vlynq_reset(dev);
- if (!vlynq_linked(dev))
- return -ENODEV;
-
-- vlynq_reg_write(dev->remote->control,
-- (vlynq_reg_read(dev->remote->control) &
-- ~VLYNQ_CTRL_CLOCK_INT));
--
-- vlynq_reg_write(dev->local->control,
-- (vlynq_reg_read(dev->local->control) &
-- ~VLYNQ_CTRL_CLOCK_INT));
-+ writel((readl(&dev->remote->control) &
-+ ~VLYNQ_CTRL_CLOCK_INT),
-+ &dev->remote->control);
-+
-+ writel((readl(&dev->local->control) &
-+ ~VLYNQ_CTRL_CLOCK_INT),
-+ &dev->local->control);
-
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG "%s: using external clock\n",
-- dev->dev.bus_id);
-+ dev_name(&dev->dev));
- dev->divisor = vlynq_div_external;
- return 0;
- }
--
-+
- return -ENODEV;
- }
-
-@@ -481,10 +504,10 @@ static int __vlynq_enable_device(struct
- case vlynq_div_external:
- case vlynq_div_auto:
- /* When the device is brought from reset it should have clock
-- generation negotiated by hardware.
-- Check which device is generating clocks and perform setup
-- accordingly */
-- if (vlynq_linked(dev) && vlynq_reg_read(dev->remote->control) &
-+ * generation negotiated by hardware.
-+ * Check which device is generating clocks and perform setup
-+ * accordingly */
-+ if (vlynq_linked(dev) && readl(&dev->remote->control) &
- VLYNQ_CTRL_CLOCK_INT) {
- if (!__vlynq_try_remote(dev) ||
- !__vlynq_try_local(dev) ||
-@@ -497,31 +520,43 @@ static int __vlynq_enable_device(struct
- return 0;
- }
- break;
-- case vlynq_ldiv1: case vlynq_ldiv2: case vlynq_ldiv3: case vlynq_ldiv4:
-- case vlynq_ldiv5: case vlynq_ldiv6: case vlynq_ldiv7: case vlynq_ldiv8:
-- vlynq_reg_write(dev->local->control,
-- VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
-- vlynq_ldiv1));
-- vlynq_reg_write(dev->remote->control, 0);
-+ case vlynq_ldiv1:
-+ case vlynq_ldiv2:
-+ case vlynq_ldiv3:
-+ case vlynq_ldiv4:
-+ case vlynq_ldiv5:
-+ case vlynq_ldiv6:
-+ case vlynq_ldiv7:
-+ case vlynq_ldiv8:
-+ writel(VLYNQ_CTRL_CLOCK_INT |
-+ VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
-+ vlynq_ldiv1), &dev->local->control);
-+ writel(0, &dev->remote->control);
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
-- "%s: using local clock divisor %d\n",
-- dev->dev.bus_id, dev->divisor - vlynq_ldiv1 + 1);
-+ "%s: using local clock divisor %d\n",
-+ dev_name(&dev->dev),
-+ dev->divisor - vlynq_ldiv1 + 1);
- return 0;
- }
- break;
-- case vlynq_rdiv1: case vlynq_rdiv2: case vlynq_rdiv3: case vlynq_rdiv4:
-- case vlynq_rdiv5: case vlynq_rdiv6: case vlynq_rdiv7: case vlynq_rdiv8:
-- vlynq_reg_write(dev->local->control, 0);
-- vlynq_reg_write(dev->remote->control,
-- VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
-- vlynq_rdiv1));
-+ case vlynq_rdiv1:
-+ case vlynq_rdiv2:
-+ case vlynq_rdiv3:
-+ case vlynq_rdiv4:
-+ case vlynq_rdiv5:
-+ case vlynq_rdiv6:
-+ case vlynq_rdiv7:
-+ case vlynq_rdiv8:
-+ writel(0, &dev->local->control);
-+ writel(VLYNQ_CTRL_CLOCK_INT |
-+ VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
-+ vlynq_rdiv1), &dev->remote->control);
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
-- "%s: using remote clock divisor %d\n",
-- dev->dev.bus_id, dev->divisor - vlynq_rdiv1 + 1);
-+ "%s: using remote clock divisor %d\n",
-+ dev_name(&dev->dev),
-+ dev->divisor - vlynq_rdiv1 + 1);
- return 0;
- }
- break;
-@@ -568,12 +603,10 @@ int vlynq_set_local_mapping(struct vlynq
- if (!dev->enabled)
- return -ENXIO;
-
-- vlynq_reg_write(dev->local->tx_offset, tx_offset);
-+ writel(tx_offset, &dev->local->tx_offset);
- for (i = 0; i < 4; i++) {
-- vlynq_reg_write(dev->local->rx_mapping[i].offset,
-- mapping[i].offset);
-- vlynq_reg_write(dev->local->rx_mapping[i].size,
-- mapping[i].size);
-+ writel(mapping[i].offset, &dev->local->rx_mapping[i].offset);
-+ writel(mapping[i].size, &dev->local->rx_mapping[i].size);
- }
- return 0;
- }
-@@ -587,12 +620,10 @@ int vlynq_set_remote_mapping(struct vlyn
- if (!dev->enabled)
- return -ENXIO;
-
-- vlynq_reg_write(dev->remote->tx_offset, tx_offset);
-+ writel(tx_offset, &dev->remote->tx_offset);
- for (i = 0; i < 4; i++) {
-- vlynq_reg_write(dev->remote->rx_mapping[i].offset,
-- mapping[i].offset);
-- vlynq_reg_write(dev->remote->rx_mapping[i].size,
-- mapping[i].size);
-+ writel(mapping[i].offset, &dev->remote->rx_mapping[i].offset);
-+ writel(mapping[i].size, &dev->remote->rx_mapping[i].size);
- }
- return 0;
- }
-@@ -662,8 +693,7 @@ static int vlynq_probe(struct platform_d
- dev->id = pdev->id;
- dev->dev.bus = &vlynq_bus_type;
- dev->dev.parent = &pdev->dev;
-- snprintf(dev->dev.bus_id, BUS_ID_SIZE, "vlynq%d", dev->id);
-- dev->dev.bus_id[BUS_ID_SIZE - 1] = 0;
-+ dev_set_name(&dev->dev, "vlynq%d", dev->id);
- dev->dev.platform_data = pdev->dev.platform_data;
- dev->dev.release = vlynq_device_release;
-
-@@ -673,9 +703,9 @@ static int vlynq_probe(struct platform_d
- dev->mem_end = mem_res->end;
-
- len = regs_res->end - regs_res->start;
-- if (!request_mem_region(regs_res->start, len, dev->dev.bus_id)) {
-+ if (!request_mem_region(regs_res->start, len, dev_name(&dev->dev))) {
- printk(KERN_ERR "%s: Can't request vlynq registers\n",
-- dev->dev.bus_id);
-+ dev_name(&dev->dev));
- result = -ENXIO;
- goto fail_request;
- }
-@@ -683,7 +713,7 @@ static int vlynq_probe(struct platform_d
- dev->local = ioremap(regs_res->start, len);
- if (!dev->local) {
- printk(KERN_ERR "%s: Can't remap vlynq registers\n",
-- dev->dev.bus_id);
-+ dev_name(&dev->dev));
- result = -ENXIO;
- goto fail_remap;
- }
-@@ -702,14 +732,14 @@ static int vlynq_probe(struct platform_d
- platform_set_drvdata(pdev, dev);
-
- printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
-- dev->dev.bus_id, (void *)dev->regs_start, dev->irq,
-+ dev_name(&dev->dev), (void *)dev->regs_start, dev->irq,
- (void *)dev->mem_start);
-
- dev->dev_id = 0;
- dev->divisor = vlynq_div_auto;
- result = __vlynq_enable_device(dev);
- if (result == 0) {
-- dev->dev_id = vlynq_reg_read(dev->remote->chip);
-+ dev->dev_id = readl(&dev->remote->chip);
- ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev);
- }
- if (dev->dev_id)
diff --git a/target/linux/ar7/patches-2.6.30/140-watchdog_bootcr.patch b/target/linux/ar7/patches-2.6.30/140-watchdog_bootcr.patch
deleted file mode 100644
index 21c95a7652..0000000000
--- a/target/linux/ar7/patches-2.6.30/140-watchdog_bootcr.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/watchdog/ar7_wdt.c
-+++ b/drivers/watchdog/ar7_wdt.c
-@@ -298,14 +298,28 @@ static struct miscdevice ar7_wdt_miscdev
- .fops = &ar7_wdt_fops,
- };
-
-+#define AR7_WDT_HARDWARE_ENABLE 0x10
-+
- static int __init ar7_wdt_init(void)
- {
- int rc;
-+ u32 *bootcr;
-+ u32 bootcr_value;
-
- spin_lock_init(&wdt_lock);
-
- ar7_wdt_get_regs();
-
-+ /* arch/mips/ar7/clocks.c is the only other thing that reads this */
-+ bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
-+ bootcr_value = *bootcr;
-+ iounmap(bootcr);
-+
-+ if (!(bootcr_value & AR7_WDT_HARDWARE_ENABLE)) {
-+ printk(KERN_INFO DRVNAME ": watchdog disabled in hardware (bootcr=%#x)\n", bootcr_value);
-+ return -ENODEV;
-+ }
-+
- if (!request_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt),
- LONGNAME)) {
- printk(KERN_WARNING DRVNAME ": watchdog I/O region busy\n");
diff --git a/target/linux/ar7/patches-2.6.30/150-cpmac_not_broken.patch b/target/linux/ar7/patches-2.6.30/150-cpmac_not_broken.patch
deleted file mode 100644
index 0c8a20d459..0000000000
--- a/target/linux/ar7/patches-2.6.30/150-cpmac_not_broken.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -1883,7 +1883,7 @@ config SC92031
-
- config CPMAC
- tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
-- depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
-+ depends on NET_ETHERNET && EXPERIMENTAL && AR7
- select PHYLIB
- help
- TI AR7 CPMAC Ethernet support
diff --git a/target/linux/ar7/patches-2.6.30/160-cpmac_up_and_running.patch b/target/linux/ar7/patches-2.6.30/160-cpmac_up_and_running.patch
deleted file mode 100644
index 8a37e3ace2..0000000000
--- a/target/linux/ar7/patches-2.6.30/160-cpmac_up_and_running.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -33,6 +33,8 @@
- #include <linux/vlynq.h>
- #include <linux/leds.h>
- #include <linux/string.h>
-+#include <linux/phy.h>
-+#include <linux/phy_fixed.h>
-
- #include <asm/addrspace.h>
- #include <asm/ar7/ar7.h>
-@@ -205,6 +207,13 @@ static struct physmap_flash_data physmap
- .width = 2,
- };
-
-+/* lets assume this is suitable for both high and low cpmacs links */
-+static struct fixed_phy_status fixed_phy_status __initdata = {
-+ .link = 1,
-+ .speed = 100,
-+ .duplex = 1,
-+};
-+
- static struct plat_cpmac_data cpmac_low_data = {
- .reset_bit = 17,
- .power_bit = 20,
-@@ -506,6 +515,10 @@ static int __init ar7_register_devices(v
- }
-
- if (ar7_has_high_cpmac()) {
-+ res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
-+ if (res && res != -ENODEV)
-+ return res;
-+
- cpmac_get_mac(1, cpmac_high_data.dev_addr);
- res = platform_device_register(&cpmac_high);
- if (res)
-@@ -514,6 +527,10 @@ static int __init ar7_register_devices(v
- cpmac_low_data.phy_mask = 0xffffffff;
- }
-
-+ res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
-+ if (res && res != -ENODEV)
-+ return res;
-+
- cpmac_get_mac(0, cpmac_low_data.dev_addr);
- res = platform_device_register(&cpmac_low);
- if (res)
diff --git a/target/linux/ar7/patches-2.6.30/500-serial_kludge.patch b/target/linux/ar7/patches-2.6.30/500-serial_kludge.patch
deleted file mode 100644
index d4b02bc913..0000000000
--- a/target/linux/ar7/patches-2.6.30/500-serial_kludge.patch
+++ /dev/null
@@ -1,38 +0,0 @@
---- a/drivers/serial/8250.c
-+++ b/drivers/serial/8250.c
-@@ -287,6 +287,13 @@ static const struct serial8250_config ua
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO,
- },
-+ [PORT_AR7] = {
-+ .name = "TI-AR7",
-+ .fifo_size = 16,
-+ .tx_loadsz = 16,
-+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
-+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
-+ },
- };
-
- #if defined (CONFIG_SERIAL_8250_AU1X00)
-@@ -2702,7 +2709,11 @@ static void serial8250_console_putchar(s
- {
- struct uart_8250_port *up = (struct uart_8250_port *)port;
-
-+#ifdef CONFIG_AR7
-+ wait_for_xmitr(up, BOTH_EMPTY);
-+#else
- wait_for_xmitr(up, UART_LSR_THRE);
-+#endif
- serial_out(up, UART_TX, ch);
- }
-
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -41,6 +41,7 @@
- #define PORT_XSCALE 15
- #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */
- #define PORT_OCTEON 17 /* Cavium OCTEON internal UART */
-+#define PORT_AR7 18 /* TI AR7 internal UART */
- #define PORT_MAX_8250 17 /* max port ID */
-
- /*
diff --git a/target/linux/ar7/patches-2.6.30/900-cpmac_multiqueue.patch b/target/linux/ar7/patches-2.6.30/900-cpmac_multiqueue.patch
deleted file mode 100644
index 3df3d68324..0000000000
--- a/target/linux/ar7/patches-2.6.30/900-cpmac_multiqueue.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-This patch fixes the network driver cpmac.c for compilation with
-configuration option CONFIG_NETDEVICES_MULTIQUEUE.
-
-These compiler warnings are fixed by the patch:
-drivers/net/cpmac.c: In function 'cpmac_end_xmit':
-drivers/net/cpmac.c:630: warning: passing argument 2 of 'netif_subqueue_stopped' makes pointer from integer without a cast
-drivers/net/cpmac.c:641: warning: passing argument 2 of 'netif_subqueue_stopped' makes pointer from integer without a cast
-drivers/net/cpmac.c: In function 'cpmac_probe':
-drivers/net/cpmac.c:1128: warning: unused variable 'i'
-
-During runtime, the unpatched driver raises a fatal runtime exception.
-This is fixed by calling __netif_subqueue_stopped instead
-of netif_subqueue_stopped, too.
-
-Two additional code parts were modified for CONFIG_NETDEVICES_MULTIQUEUE
-because other drivers do it in the same way.
-
- Signed-off-by: Stefan Weil <weil@mail.berlios.de>
-
---- a/drivers/net/cpmac.c
-+++ b/drivers/net/cpmac.c
-@@ -615,13 +615,13 @@ static void cpmac_end_xmit(struct net_de
-
- dev_kfree_skb_irq(desc->skb);
- desc->skb = NULL;
-- if (netif_subqueue_stopped(dev, queue))
-+ if (__netif_subqueue_stopped(dev, queue))
- netif_wake_subqueue(dev, queue);
- } else {
- if (netif_msg_tx_err(priv) && net_ratelimit())
- printk(KERN_WARNING
- "%s: end_xmit: spurious interrupt\n", dev->name);
-- if (netif_subqueue_stopped(dev, queue))
-+ if (__netif_subqueue_stopped(dev, queue))
- netif_wake_subqueue(dev, queue);
- }
- }
-@@ -731,7 +731,6 @@ static void cpmac_clear_tx(struct net_de
-
- static void cpmac_hw_error(struct work_struct *work)
- {
-- int i;
- struct cpmac_priv *priv =
- container_of(work, struct cpmac_priv, reset_work);
-
-@@ -818,7 +817,6 @@ static irqreturn_t cpmac_irq(int irq, vo
-
- static void cpmac_tx_timeout(struct net_device *dev)
- {
-- int i;
- struct cpmac_priv *priv = netdev_priv(dev);
-
- spin_lock(&priv->lock);
-@@ -1097,7 +1095,7 @@ static int external_switch;
-
- static int __devinit cpmac_probe(struct platform_device *pdev)
- {
-- int rc, phy_id, i;
-+ int rc, phy_id;
- char *mdio_bus_id = "0";
- struct resource *mem;
- struct cpmac_priv *priv;
-@@ -1125,6 +1123,7 @@ static int __devinit cpmac_probe(struct
- }
-
- dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
-+ //~ dev = alloc_etherdev(sizeof(*priv));
-
- if (!dev) {
- printk(KERN_ERR "cpmac: Unable to allocate net_device\n");
diff --git a/target/linux/ar7/patches-2.6.30/910-cpmac_fixed_phy.patch b/target/linux/ar7/patches-2.6.30/910-cpmac_fixed_phy.patch
deleted file mode 100644
index bd7345abf9..0000000000
--- a/target/linux/ar7/patches-2.6.30/910-cpmac_fixed_phy.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-This is a hack to make cpmac work with the external switch on a DG834 v3; it
-should also work on other similar routers. It has not been tested on hardware
-with multiple cpmac devices or with no external switch. It may be safer to
-move external_switch to pdata rather than trying to detect it, and to set
-phy_mask correctly rather than moving the phy search loop.
-
---- a/drivers/net/cpmac.c
-+++ b/drivers/net/cpmac.c
-@@ -1096,7 +1096,7 @@ static int external_switch;
- static int __devinit cpmac_probe(struct platform_device *pdev)
- {
- int rc, phy_id;
-- char *mdio_bus_id = "0";
-+ char mdio_bus_id[BUS_ID_SIZE];
- struct resource *mem;
- struct cpmac_priv *priv;
- struct net_device *dev;
-@@ -1104,22 +1104,23 @@ static int __devinit cpmac_probe(struct
-
- pdata = pdev->dev.platform_data;
-
-- for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
-- if (!(pdata->phy_mask & (1 << phy_id)))
-- continue;
-- if (!cpmac_mii->phy_map[phy_id])
-- continue;
-- break;
-+ if (external_switch || dumb_switch) {
-+ strncpy(mdio_bus_id, "0", BUS_ID_SIZE); /* fixed phys bus */
-+ phy_id = pdev->id;
-+ } else {
-+ for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
-+ if (!(pdata->phy_mask & (1 << phy_id)))
-+ continue;
-+ if (!cpmac_mii->phy_map[phy_id])
-+ continue;
-+ strncpy(mdio_bus_id, cpmac_mii->id, BUS_ID_SIZE);
-+ break;
-+ }
- }
-
- if (phy_id == PHY_MAX_ADDR) {
-- if (external_switch || dumb_switch) {
-- mdio_bus_id = 0; /* fixed phys bus */
-- phy_id = pdev->id;
-- } else {
-- dev_err(&pdev->dev, "no PHY present\n");
-- return -ENODEV;
-- }
-+ dev_err(&pdev->dev, "no PHY present\n");
-+ return -ENODEV;
- }
-
- dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
-@@ -1160,8 +1161,10 @@ static int __devinit cpmac_probe(struct
- priv->msg_enable = netif_msg_init(debug_level, 0xff);
- memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
-
-- priv->phy = phy_connect(dev, dev_name(&cpmac_mii->phy_map[phy_id]->dev),
-- &cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII);
-+ snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
-+
-+ priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
-+ PHY_INTERFACE_MODE_MII);
- if (IS_ERR(priv->phy)) {
- if (netif_msg_drv(priv))
- printk(KERN_ERR "%s: Could not attach to PHY\n",
-@@ -1235,11 +1238,11 @@ int __devinit cpmac_init(void)
-
- cpmac_mii->reset(cpmac_mii);
-
-- for (i = 0; i < 300000; i++)
-+ for (i = 0; i < 300; i++)
- if ((mask = cpmac_read(cpmac_mii->priv, CPMAC_MDIO_ALIVE)))
- break;
- else
-- cpu_relax();
-+ msleep(10);
-
- mask &= 0x7fffffff;
- if (mask & (mask - 1)) {
-@@ -1248,7 +1251,7 @@ int __devinit cpmac_init(void)
- }
-
- cpmac_mii->phy_mask = ~(mask | 0x80000000);
-- snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "0");
-+ snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "1");
-
- res = mdiobus_register(cpmac_mii);
- if (res)
diff --git a/target/linux/ar7/patches-2.6.30/930-titan-platform.patch b/target/linux/ar7/patches-2.6.30/930-titan-platform.patch
deleted file mode 100644
index 80f7eb8ad9..0000000000
--- a/target/linux/ar7/patches-2.6.30/930-titan-platform.patch
+++ /dev/null
@@ -1,248 +0,0 @@
---- a/arch/mips/ar7/platform.c 2009-11-18 14:57:44.000000000 +0800
-+++ b/arch/mips/ar7/platform.c 2009-11-18 15:43:04.000000000 +0800
-@@ -128,6 +128,36 @@
- },
- };
-
-+static struct resource cpmac_low_res_titan[] = {
-+ {
-+ .name = "regs",
-+ .flags = IORESOURCE_MEM,
-+ .start = TITAN_REGS_MAC0,
-+ .end = TITAN_REGS_MAC0 + 0x7ff,
-+ },
-+ {
-+ .name = "irq",
-+ .flags = IORESOURCE_IRQ,
-+ .start = 27,
-+ .end = 27,
-+ },
-+};
-+
-+static struct resource cpmac_high_res_titan[] = {
-+ {
-+ .name = "regs",
-+ .flags = IORESOURCE_MEM,
-+ .start = TITAN_REGS_MAC1,
-+ .end = TITAN_REGS_MAC1 + 0x7ff,
-+ },
-+ {
-+ .name = "irq",
-+ .flags = IORESOURCE_IRQ,
-+ .start = 41,
-+ .end = 41,
-+ },
-+};
-+
- static struct resource vlynq_low_res[] = {
- {
- .name = "regs",
-@@ -182,6 +212,60 @@
- },
- };
-
-+static struct resource vlynq_low_res_titan[] = {
-+ {
-+ .name = "regs",
-+ .flags = IORESOURCE_MEM,
-+ .start = TITAN_REGS_VLYNQ0,
-+ .end = TITAN_REGS_VLYNQ0 + 0xff,
-+ },
-+ {
-+ .name = "irq",
-+ .flags = IORESOURCE_IRQ,
-+ .start = 33,
-+ .end = 33,
-+ },
-+ {
-+ .name = "mem",
-+ .flags = IORESOURCE_MEM,
-+ .start = 0x0c000000,
-+ .end = 0x0fffffff,
-+ },
-+ {
-+ .name = "devirq",
-+ .flags = IORESOURCE_IRQ,
-+ .start = 80,
-+ .end = 111,
-+ },
-+};
-+
-+static struct resource vlynq_high_res_titan[] = {
-+ {
-+ .name = "regs",
-+ .flags = IORESOURCE_MEM,
-+ .start = TITAN_REGS_VLYNQ1,
-+ .end = TITAN_REGS_VLYNQ1 + 0xff,
-+ },
-+ {
-+ .name = "irq",
-+ .flags = IORESOURCE_IRQ,
-+ .start = 34,
-+ .end = 34,
-+ },
-+ {
-+ .name = "mem",
-+ .flags = IORESOURCE_MEM,
-+ .start = 0x40000000,
-+ .end = 0x43ffffff,
-+ },
-+ {
-+ .name = "devirq",
-+ .flags = IORESOURCE_IRQ,
-+ .start = 112,
-+ .end = 143,
-+ },
-+};
-+
- static struct resource usb_res[] = {
- {
- .name = "regs",
-@@ -226,6 +310,18 @@
- .phy_mask = 0x7fffffff,
- };
-
-+static struct plat_cpmac_data cpmac_low_data_titan = {
-+ .reset_bit = 17,
-+ .power_bit = 20,
-+ .phy_mask = 0x40000000,
-+};
-+
-+static struct plat_cpmac_data cpmac_high_data_titan = {
-+ .reset_bit = 21,
-+ .power_bit = 22,
-+ .phy_mask = 0x80000000,
-+};
-+
- static struct plat_vlynq_data vlynq_low_data = {
- .ops.on = vlynq_on,
- .ops.off = vlynq_off,
-@@ -240,6 +336,20 @@
- .gpio_bit = 19,
- };
-
-+static struct plat_vlynq_data vlynq_low_data_titan = {
-+ .ops.on = vlynq_on,
-+ .ops.off = vlynq_off,
-+ .reset_bit = 15,
-+ .gpio_bit = 14,
-+};
-+
-+static struct plat_vlynq_data vlynq_high_data_titan = {
-+ .ops.on = vlynq_on,
-+ .ops.off = vlynq_off,
-+ .reset_bit = 16,
-+ .gpio_bit = 7,
-+};
-+
- static struct platform_device physmap_flash = {
- .id = 0,
- .name = "physmap-flash",
-@@ -273,6 +383,30 @@
- .num_resources = ARRAY_SIZE(cpmac_high_res),
- };
-
-+static struct platform_device cpmac_low_titan = {
-+ .id = 0,
-+ .name = "cpmac",
-+ .dev = {
-+ .dma_mask = &cpmac_dma_mask,
-+ .coherent_dma_mask = DMA_32BIT_MASK,
-+ .platform_data = &cpmac_low_data_titan,
-+ },
-+ .resource = cpmac_low_res_titan,
-+ .num_resources = ARRAY_SIZE(cpmac_low_res_titan),
-+};
-+
-+static struct platform_device cpmac_high_titan = {
-+ .id = 1,
-+ .name = "cpmac",
-+ .dev = {
-+ .dma_mask = &cpmac_dma_mask,
-+ .coherent_dma_mask = DMA_32BIT_MASK,
-+ .platform_data = &cpmac_high_data_titan,
-+ },
-+ .resource = cpmac_high_res_titan,
-+ .num_resources = ARRAY_SIZE(cpmac_high_res_titan),
-+};
-+
- static struct platform_device vlynq_low = {
- .id = 0,
- .name = "vlynq",
-@@ -289,6 +423,22 @@
- .num_resources = ARRAY_SIZE(vlynq_high_res),
- };
-
-+static struct platform_device vlynq_low_titan = {
-+ .id = 0,
-+ .name = "vlynq",
-+ .dev.platform_data = &vlynq_low_data_titan,
-+ .resource = vlynq_low_res_titan,
-+ .num_resources = ARRAY_SIZE(vlynq_low_res_titan),
-+};
-+
-+static struct platform_device vlynq_high_titan = {
-+ .id = 1,
-+ .name = "vlynq",
-+ .dev.platform_data = &vlynq_high_data_titan,
-+ .resource = vlynq_high_res_titan,
-+ .num_resources = ARRAY_SIZE(vlynq_high_res_titan),
-+};
-+
-
- /* This is proper way to define uart ports, but they are then detected
- * as xscale and, obviously, don't work...
-@@ -333,6 +483,11 @@
- { .name = "status", .gpio = 8, .active_low = 1, },
- };
-
-+static struct gpio_led titan_leds[] = {
-+ { .name = "status", .gpio = 8, .active_low = 1, },
-+ { .name = "wifi", .gpio = 13, .active_low = 1, },
-+};
-+
- static struct gpio_led dsl502t_leds[] = {
- { .name = "status", .gpio = 9, .active_low = 1, },
- { .name = "ethernet", .gpio = 7, .active_low = 1, },
-@@ -425,7 +580,7 @@
- /* FIXME: the whole thing is unreliable */
- prId = prom_getenv("ProductID");
- usb_prod = prom_getenv("usb_prod");
--
-+
- /* If we can't get the product id from PROM, use the default LEDs */
- if (!prId)
- return;
-@@ -442,6 +597,9 @@
- } else if (strstr(prId, "DG834")) {
- ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
- ar7_led_data.leds = dg834g_leds;
-+ } else if (strstr(prId, "CYWM")) {
-+ ar7_led_data.num_leds = ARRAY_SIZE(titan_leds);
-+ ar7_led_data.leds = titan_leds;
- }
- }
-
-@@ -502,14 +660,18 @@
- if (res)
- return res;
-
-- ar7_device_disable(vlynq_low_data.reset_bit);
-- res = platform_device_register(&vlynq_low);
-+ ar7_device_disable(ar7_is_titan() ? vlynq_low_data_titan.reset_bit :
-+ vlynq_low_data.reset_bit);
-+ res = platform_device_register(ar7_is_titan() ? &vlynq_low_titan :
-+ &vlynq_low);
- if (res)
- return res;
-
- if (ar7_has_high_vlynq()) {
-- ar7_device_disable(vlynq_high_data.reset_bit);
-- res = platform_device_register(&vlynq_high);
-+ ar7_device_disable(ar7_is_titan() ? vlynq_high_data_titan.reset_bit :
-+ vlynq_high_data.reset_bit);
-+ res = platform_device_register(ar7_is_titan() ? &vlynq_high_titan :
-+ &vlynq_high);
- if (res)
- return res;
- }
diff --git a/target/linux/ar7/patches-2.6.30/940-cpmac-titan.patch b/target/linux/ar7/patches-2.6.30/940-cpmac-titan.patch
deleted file mode 100644
index 6aa59c5d00..0000000000
--- a/target/linux/ar7/patches-2.6.30/940-cpmac-titan.patch
+++ /dev/null
@@ -1,76 +0,0 @@
---- a/arch/mips/ar7/platform.c 2010-01-25 16:11:24.000000000 +0800
-+++ b/arch/mips/ar7/platform.c 2010-01-13 14:46:16.000000000 +0800
-@@ -677,24 +677,32 @@
- }
-
- if (ar7_has_high_cpmac()) {
-- res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
-+ res = fixed_phy_add(PHY_POLL, ar7_is_titan()?cpmac_high_titan.id: cpmac_high.id, &fixed_phy_status);
- if (res && res != -ENODEV)
- return res;
-
-- cpmac_get_mac(1, cpmac_high_data.dev_addr);
-- res = platform_device_register(&cpmac_high);
-+ cpmac_get_mac(1, ar7_is_titan() ? cpmac_high_data_titan.dev_addr:
-+ cpmac_high_data.dev_addr);
-+ res = platform_device_register(ar7_is_titan() ? &cpmac_high_titan :
-+ &cpmac_high);
- if (res)
- return res;
- } else {
-- cpmac_low_data.phy_mask = 0xffffffff;
-- }
-+ if (ar7_is_titan())
-+ cpmac_low_data_titan.phy_mask = 0xffffffff;
-+ else
-+ cpmac_low_data.phy_mask = 0xffffffff;
-+ }
-
-- res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
-+ res = fixed_phy_add(PHY_POLL, ar7_is_titan()?cpmac_low_titan.id:
-+ cpmac_low.id, &fixed_phy_status);
- if (res && res != -ENODEV)
- return res;
-
-- cpmac_get_mac(0, cpmac_low_data.dev_addr);
-- res = platform_device_register(&cpmac_low);
-+ cpmac_get_mac(0, ar7_is_titan() ? cpmac_low_data_titan.dev_addr :
-+ cpmac_low_data.dev_addr);
-+ res = platform_device_register(ar7_is_titan() ? &cpmac_low_titan :
-+ &cpmac_low);
- if (res)
- return res;
-
---- a/drivers/net/cpmac.c 2010-01-25 16:11:24.000000000 +0800
-+++ b/drivers/net/cpmac.c 2010-01-25 16:48:02.000000000 +0800
-@@ -1141,6 +1141,8 @@
- goto fail;
- }
-
-+ ar7_device_reset(pdata->reset_bit);
-+
- dev->irq = platform_get_irq_byname(pdev, "irq");
-
- dev->open = cpmac_open;
-@@ -1221,7 +1223,7 @@
- cpmac_mii->reset = cpmac_mdio_reset;
- cpmac_mii->irq = mii_irqs;
-
-- cpmac_mii->priv = ioremap(AR7_REGS_MDIO, 256);
-+ cpmac_mii->priv = ioremap(ar7_is_titan()?TITAN_REGS_MDIO:AR7_REGS_MDIO, 256);
-
- if (!cpmac_mii->priv) {
- printk(KERN_ERR "Can't ioremap mdio registers\n");
-@@ -1232,9 +1234,10 @@
- #warning FIXME: unhardcode gpio&reset bits
- ar7_gpio_disable(26);
- ar7_gpio_disable(27);
-- ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
-- ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
- ar7_device_reset(AR7_RESET_BIT_EPHY);
-+ if (ar7_is_titan()) {
-+ ar7_device_reset(TITAN_RESET_BIT_EPHY1);
-+ }
-
- cpmac_mii->reset(cpmac_mii);
-
diff --git a/target/linux/ar7/patches-2.6.30/950-cpmac_allow_vlan.patch b/target/linux/ar7/patches-2.6.30/950-cpmac_allow_vlan.patch
deleted file mode 100644
index 022da4fab5..0000000000
--- a/target/linux/ar7/patches-2.6.30/950-cpmac_allow_vlan.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/cpmac.c 2010-02-11 23:52:19.000000000 +0000
-+++ b/drivers/net/cpmac.c 2010-02-20 20:32:58.000000000 +0000
-@@ -57,7 +57,7 @@
-
- #define CPMAC_VERSION "0.5.0"
- /* frame size + 802.1q tag */
--#define CPMAC_SKB_SIZE (ETH_FRAME_LEN + 4)
-+#define CPMAC_SKB_SIZE (ETH_FRAME_LEN + ETH_FCS_LEN + 4)
- #define CPMAC_QUEUES 8
-
- /* Ethernet registers */