aboutsummaryrefslogtreecommitdiffstats
path: root/0001-ramips-add-support-for-Nexx-WT3020-devices.patch
diff options
context:
space:
mode:
Diffstat (limited to '0001-ramips-add-support-for-Nexx-WT3020-devices.patch')
-rw-r--r--0001-ramips-add-support-for-Nexx-WT3020-devices.patch319
1 files changed, 319 insertions, 0 deletions
diff --git a/0001-ramips-add-support-for-Nexx-WT3020-devices.patch b/0001-ramips-add-support-for-Nexx-WT3020-devices.patch
new file mode 100644
index 0000000000..a67b275473
--- /dev/null
+++ b/0001-ramips-add-support-for-Nexx-WT3020-devices.patch
@@ -0,0 +1,319 @@
+From fceb829eca2bc088ad66b18099b57dc96f1bae43 Mon Sep 17 00:00:00 2001
+From: Roger Pueyo Centelles <roger.pueyo@guifi.net>
+Date: Sun, 19 Oct 2014 17:50:01 +0200
+Subject: [PATCH] ramips: add support for Nexx WT3020 devices
+
+---
+ target/linux/ramips/base-files/etc/board.d/01_leds | 3 +
+ .../linux/ramips/base-files/etc/board.d/02_network | 1 +
+ target/linux/ramips/base-files/etc/diag.sh | 3 +
+ target/linux/ramips/base-files/lib/ramips.sh | 3 +
+ .../ramips/base-files/lib/upgrade/platform.sh | 1 +
+ target/linux/ramips/dts/WT3020-4M.dts | 100 +++++++++++++++++++++
+ target/linux/ramips/dts/WT3020-8M.dts | 100 +++++++++++++++++++++
+ target/linux/ramips/image/Makefile | 2 +
+ 8 files changed, 213 insertions(+)
+ create mode 100644 target/linux/ramips/dts/WT3020-4M.dts
+ create mode 100644 target/linux/ramips/dts/WT3020-8M.dts
+
+diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
+index 26f384d..7ca7ffb 100755
+--- a/target/linux/ramips/base-files/etc/board.d/01_leds
++++ b/target/linux/ramips/base-files/etc/board.d/01_leds
+@@ -213,6 +213,9 @@ case $board in
+ wt1520)
+ set_wifi_led "rt2800pci-phy0::radio"
+ ;;
++ wt3020)
++ ucidef_set_led_default "power" "power" "nexx:blue:power" "0"
++ ;;
+ y1 |\
+ y1s)
+ ucidef_set_led_default "power" "power" "lenovo:blue:power" "1"
+diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
+index 7ecec5f..ff8fbc0 100755
+--- a/target/linux/ramips/base-files/etc/board.d/02_network
++++ b/target/linux/ramips/base-files/etc/board.d/02_network
+@@ -127,6 +127,7 @@ ramips_setup_interfaces()
+ hg255d | \
+ rt-n14u | \
+ wrtnode | \
++ wt3020 | \
+ ur-326n4g | \
+ zbt-wa05)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
+index aed7d6a..2977099 100755
+--- a/target/linux/ramips/base-files/etc/diag.sh
++++ b/target/linux/ramips/base-files/etc/diag.sh
+@@ -170,6 +170,9 @@ get_status_led() {
+ nexx-wt1520)
+ status_led="nexx-wt1520:white:power"
+ ;;
++ nexx-wt3020)
++ status_led="nexx:blue:power"
++ ;;
+ mzk-w300nh2)
+ status_led="mzkw300nh2:green:power"
+ ;;
+diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
+index 08c5dff..88fa623 100755
+--- a/target/linux/ramips/base-files/lib/ramips.sh
++++ b/target/linux/ramips/base-files/lib/ramips.sh
+@@ -184,6 +184,9 @@ ramips_board_detect() {
+ *"Nexx WT1520")
+ name="wt1520"
+ ;;
++ *"Nexx WT3020")
++ name="wt3020"
++ ;;
+ *"NW718")
+ name="nw718"
+ ;;
+diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
+index 61a0935..c9a418e 100755
+--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
++++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
+@@ -97,6 +97,7 @@ platform_check_image() {
+ wr8305rt |\
+ wrtnode |\
+ wt1520 |\
++ wt3020 |\
+ x5 |\
+ x8 |\
+ y1 |\
+diff --git a/target/linux/ramips/dts/WT3020-4M.dts b/target/linux/ramips/dts/WT3020-4M.dts
+new file mode 100644
+index 0000000..7583680
+--- /dev/null
++++ b/target/linux/ramips/dts/WT3020-4M.dts
+@@ -0,0 +1,100 @@
++/dts-v1/;
++
++/include/ "mt7620n.dtsi"
++
++/ {
++ compatible = "wt3020", "ralink,mt7620n-soc";
++ model = "Nexx WT3020";
++
++ palmbus@10000000 {
++ gpio2: gpio@660 {
++ status = "okay";
++ };
++
++ gpio3: gpio@688 {
++ status = "okay";
++ };
++
++ spi@b00 {
++ status = "okay";
++
++ m25p80@0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "w25q32";
++ reg = <0 0>;
++ linux,modalias = "m25p80", "w25q32";
++ spi-max-frequency = <10000000>;
++
++ partition@0 {
++ label = "u-boot";
++ reg = <0x0 0x30000>;
++ read-only;
++ };
++
++ partition@30000 {
++ label = "u-boot-env";
++ reg = <0x30000 0x10000>;
++ read-only;
++ };
++
++ factory: partition@40000 {
++ label = "factory";
++ reg = <0x40000 0x10000>;
++ read-only;
++ };
++
++ partition@50000 {
++ label = "firmware";
++ reg = <0x50000 0x3b0000>;
++ };
++ };
++ };
++ };
++
++ ehci@101c0000 {
++ status = "okay";
++ };
++
++ ohci@101c1000 {
++ status = "okay";
++ };
++
++ ethernet@10100000 {
++ mtd-mac-address = <&factory 0x4>;
++ ralink,port-map = "wllll";
++ };
++
++ wmac@10180000 {
++ ralink,mtd-eeprom = <&factory 0>;
++ };
++
++ pinctrl {
++ state_default: pinctrl0 {
++ default {
++ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
++ ralink,function = "gpio";
++ };
++ };
++ };
++
++ gpio-keys-polled {
++ compatible = "gpio-keys-polled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ poll-interval = <20>;
++ reset {
++ label = "reset";
++ gpios = <&gpio0 1 1>;
++ linux,code = <0x198>;
++ };
++ };
++
++ gpio-leds {
++ compatible = "gpio-leds";
++ power {
++ label = "nexx:blue:power";
++ gpios = <&gpio3 0 0>;
++ };
++ };
++};
+diff --git a/target/linux/ramips/dts/WT3020-8M.dts b/target/linux/ramips/dts/WT3020-8M.dts
+new file mode 100644
+index 0000000..5fa7c92
+--- /dev/null
++++ b/target/linux/ramips/dts/WT3020-8M.dts
+@@ -0,0 +1,100 @@
++/dts-v1/;
++
++/include/ "mt7620n.dtsi"
++
++/ {
++ compatible = "wt3020", "ralink,mt7620n-soc";
++ model = "Nexx WT3020";
++
++ palmbus@10000000 {
++ gpio2: gpio@660 {
++ status = "okay";
++ };
++
++ gpio3: gpio@688 {
++ status = "okay";
++ };
++
++ spi@b00 {
++ status = "okay";
++
++ m25p80@0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "w25q64";
++ reg = <0 0>;
++ linux,modalias = "m25p80", "w25q64";
++ spi-max-frequency = <10000000>;
++
++ partition@0 {
++ label = "u-boot";
++ reg = <0x0 0x30000>;
++ read-only;
++ };
++
++ partition@30000 {
++ label = "u-boot-env";
++ reg = <0x30000 0x10000>;
++ read-only;
++ };
++
++ factory: partition@40000 {
++ label = "factory";
++ reg = <0x40000 0x10000>;
++ read-only;
++ };
++
++ partition@50000 {
++ label = "firmware";
++ reg = <0x50000 0x7b0000>;
++ };
++ };
++ };
++ };
++
++ ehci@101c0000 {
++ status = "okay";
++ };
++
++ ohci@101c1000 {
++ status = "okay";
++ };
++
++ ethernet@10100000 {
++ mtd-mac-address = <&factory 0x4>;
++ ralink,port-map = "wllll";
++ };
++
++ wmac@10180000 {
++ ralink,mtd-eeprom = <&factory 0>;
++ };
++
++ pinctrl {
++ state_default: pinctrl0 {
++ default {
++ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
++ ralink,function = "gpio";
++ };
++ };
++ };
++
++ gpio-keys-polled {
++ compatible = "gpio-keys-polled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ poll-interval = <20>;
++ reset {
++ label = "reset";
++ gpios = <&gpio0 1 1>;
++ linux,code = <0x198>;
++ };
++ };
++
++ gpio-leds {
++ compatible = "gpio-leds";
++ power {
++ label = "nexx:blue:power";
++ gpios = <&gpio3 0 0>;
++ };
++ };
++};
+diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
+index f048caf..a93b82c 100644
+--- a/target/linux/ramips/image/Makefile
++++ b/target/linux/ramips/image/Makefile
+@@ -769,6 +769,7 @@ Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR3
+ Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
+ Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
+ Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
++Image/Build/Profile/WT3020=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wt3020,WT3020)
+ Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
+
+ ifeq ($(SUBTARGET),mt7620n)
+@@ -778,6 +779,7 @@ define Image/Build/Profile/Default
+ $(call Image/Build/Profile/RT-N14U,$(1))
+ $(call Image/Build/Profile/WR8305RT,$(1))
+ $(call Image/Build/Profile/WRTNODE,$(1))
++ $(call Image/Build/Profile/WT3020,$(1))
+ $(call Image/Build/Profile/ZBT-WA05,$(1))
+ endef
+ endif
+--
+2.1.1
+