convert rb532 to the new structure

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7273 3c298f89-4303-0410-b956-a3cf2f4a3e73

12 files changed, 1613 insertions, 0 deletions

diff --git a/target/linux/rb532-2.6/files/arch/mips/pci/fixup-rb500.c b/target/linux/rb532-2.6/files/arch/mips/pci/fixup-rb500.c
new file mode 100644
index 0000000000..ceb53b0aa9
--- /dev/null
+++ b/target/linux/rb532-2.6/files/arch/mips/pci/fixup-rb500.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	stevel@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/rc32434/rc32434.h>
+
+static int __devinitdata irq_map[2][12] = {
+	{ 0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1 },
+	{ 0, 0, 1, 3, 0, 2, 1, 3, 0, 2, 1, 3 }
+};
+
+int __devinit pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq = 0;
+
+	if (dev->bus->number < 2 && PCI_SLOT(dev->devfn) < 12) {
+		irq = irq_map[dev->bus->number][PCI_SLOT(dev->devfn)];
+	}
+	return irq + GROUP4_IRQ_BASE + 4;
+}
+
diff --git a/target/linux/rb532-2.6/files/arch/mips/pci/ops-rc32434.c b/target/linux/rb532-2.6/files/arch/mips/pci/ops-rc32434.c
new file mode 100644
index 0000000000..b90ab1d129
--- /dev/null
+++ b/target/linux/rb532-2.6/files/arch/mips/pci/ops-rc32434.c
@@ -0,0 +1,218 @@
+/**************************************************************************
+ *
+ *  BRIEF MODULE DESCRIPTION
+ *     pci_ops for IDT EB434 board
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *  Copyright 2006 Felix Fietkau <nbd@openwrt.org>
+ *         
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ **************************************************************************
+ * May 2004 rkt, neb
+ *
+ * Initial Release
+ *
+ * 
+ *
+ **************************************************************************
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+
+#include <asm/cpu.h>
+#include <asm/io.h>
+
+#include <asm/rc32434/rc32434.h>
+#include <asm/rc32434/pci.h> 
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+
+#define PCI_CFG_SET(bus,slot,func,off) \
+	(rc32434_pci->pcicfga = (0x80000000 | \
+				((bus) << 16) | ((slot)<<11) | \
+				((func)<<8) | (off)))
+
+static inline int config_access(unsigned char access_type, struct pci_bus *bus,
+                         unsigned int devfn, unsigned char where,
+                         u32 * data)
+{ 
+	unsigned int slot = PCI_SLOT(devfn);
+	u8 func = PCI_FUNC(devfn);
+	
+	/* Setup address */
+	PCI_CFG_SET(bus->number, slot, func, where);
+	rc32434_sync();
+	
+	if (access_type == PCI_ACCESS_WRITE)
+		rc32434_pci->pcicfgd = *data;
+	else
+		*data = rc32434_pci->pcicfgd;
+	
+	rc32434_sync();
+	
+	return 0;
+}
+
+
+/*
+ * We can't address 8 and 16 bit words directly.  Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
+                            int where, u8 * val)
+{
+	u32 data;
+	int ret;
+	
+	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+	*val = (data >> ((where & 3) << 3)) & 0xff;
+	return ret;
+}
+
+static int read_config_word(struct pci_bus *bus, unsigned int devfn,
+                            int where, u16 * val)
+{
+	u32 data;
+	int ret;
+	
+	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+	*val = (data >> ((where & 3) << 3)) & 0xffff;
+	return ret;
+}
+
+static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
+                             int where, u32 * val)
+{
+	int ret;
+	int delay = 1;
+
+	if (bus->number == 0 && PCI_SLOT(devfn) > 21)
+		return 0;
+
+retry:
+	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val);
+	
+	/* PCI scan: check for invalid values, device may not have
+	 * finished initializing */
+
+	if (where == PCI_VENDOR_ID) {
+		if (ret == 0xffffffff || ret == 0x00000000 ||
+			ret == 0x0000ffff || ret == 0xffff0000) {
+
+			if (delay > 4)
+				return 0;
+
+			delay *= 2;
+			msleep(delay);
+			goto retry;
+		}
+	}
+	
+	return ret;
+}
+
+static int
+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
+                  u8 val)
+{
+	u32 data = 0;
+	
+	if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+		return -1;
+	
+	data = (data & ~(0xff << ((where & 3) << 3))) |
+		(val << ((where & 3) << 3));
+	
+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+		return -1;
+	
+	return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int
+write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
+                  u16 val)
+{
+	u32 data = 0;
+	
+	if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+		return -1;
+	
+	data = (data & ~(0xffff << ((where & 3) << 3))) |
+		(val << ((where & 3) << 3));
+	
+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+		return -1;
+	
+	
+	return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int 
+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
+                   u32 val)
+{
+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
+		return -1;
+	
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_config_read(struct pci_bus *bus, unsigned int devfn,
+			   int where, int size, u32 * val)
+{
+	switch (size) {
+	case 1: 
+		return read_config_byte(bus, devfn, where, (u8 *) val);
+	case 2: 
+		return read_config_word(bus, devfn, where, (u16 *) val);
+	default:
+		return read_config_dword(bus, devfn, where, val);
+	}
+}
+
+static int pci_config_write(struct pci_bus *bus, unsigned int devfn,
+			    int where, int size, u32 val)
+{
+	switch (size) {
+	case 1: 
+		return write_config_byte(bus, devfn, where, (u8) val);
+	case 2: 
+		return write_config_word(bus, devfn, where, (u16) val);
+	default:
+		return write_config_dword(bus, devfn, where, val);
+	}
+}
+
+struct pci_ops rc32434_pci_ops = {
+	.read =  pci_config_read,
+	.write = pci_config_write,
+};
diff --git a/target/linux/rb532-2.6/files/arch/mips/pci/pci-rc32434.c b/target/linux/rb532-2.6/files/arch/mips/pci/pci-rc32434.c
new file mode 100644
index 0000000000..fbc8268328
--- /dev/null
+++ b/target/linux/rb532-2.6/files/arch/mips/pci/pci-rc32434.c
@@ -0,0 +1,234 @@
+/**************************************************************************
+ *
+ *  BRIEF MODULE DESCRIPTION
+ *     PCI initialization for IDT EB434 board
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ **************************************************************************
+ * May 2004 rkt, neb
+ *
+ * Initial Release
+ *
+ *
+ *
+ **************************************************************************
+ */
+
+#include <linux/autoconf.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/rc32434/rc32434.h>
+#include <asm/rc32434/pci.h>
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+/* define an unsigned array for the PCI registers */
+unsigned int korinaCnfgRegs[25] = {
+	KORINA_CNFG1,	 KORINA_CNFG2,  KORINA_CNFG3,  KORINA_CNFG4,
+	KORINA_CNFG5,	 KORINA_CNFG6,  KORINA_CNFG7,  KORINA_CNFG8,
+	KORINA_CNFG9,	 KORINA_CNFG10, KORINA_CNFG11, KORINA_CNFG12,
+	KORINA_CNFG13, KORINA_CNFG14, KORINA_CNFG15, KORINA_CNFG16,
+	KORINA_CNFG17, KORINA_CNFG18, KORINA_CNFG19, KORINA_CNFG20,
+	KORINA_CNFG21, KORINA_CNFG22, KORINA_CNFG23, KORINA_CNFG24
+};
+static struct resource rc32434_res_pci_mem1;
+static struct resource rc32434_res_pci_mem2;
+
+static struct resource rc32434_res_pci_mem1 = {
+	.name = "PCI MEM1",
+	.start = 0x50000000,
+	.end = 0x5FFFFFFF,
+	.flags = IORESOURCE_MEM,
+	.parent = &rc32434_res_pci_mem1,
+	.sibling = NULL,
+	.child = &rc32434_res_pci_mem2
+};
+
+static struct resource rc32434_res_pci_mem2 = {
+	.name = "PCI Mem2",
+	.start = 0x60000000,
+	.end = 0x6FFFFFFF,
+	.flags = IORESOURCE_MEM,
+	.parent = &rc32434_res_pci_mem1,
+	.sibling = NULL,
+	.child = NULL
+};
+
+static struct resource rc32434_res_pci_io1 = {
+	.name = "PCI I/O1",
+	.start = 0x18800000,
+	.end = 0x188FFFFF,
+	.flags = IORESOURCE_IO,
+};
+
+extern struct pci_ops rc32434_pci_ops;
+
+#define PCI_MEM1_START	PCI_ADDR_START
+#define PCI_MEM1_END	PCI_ADDR_START + CPUTOPCI_MEM_WIN - 1
+#define PCI_MEM2_START	PCI_ADDR_START + CPUTOPCI_MEM_WIN
+#define PCI_MEM2_END	PCI_ADDR_START + ( 2* CPUTOPCI_MEM_WIN)  - 1
+#define PCI_IO1_START	PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN)
+#define PCI_IO1_END 	PCI_ADDR_START + (2* CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN -1
+#define PCI_IO2_START	PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN
+#define PCI_IO2_END 	PCI_ADDR_START + (2* CPUTOPCI_MEM_WIN) + (2 * CPUTOPCI_IO_WIN) -1
+
+
+struct pci_controller rc32434_controller2;
+
+struct pci_controller rc32434_controller = {
+	.pci_ops 	= &rc32434_pci_ops,
+	.mem_resource 	= &rc32434_res_pci_mem1,
+	.io_resource 	= &rc32434_res_pci_io1,
+	.mem_offset     = 0,
+	.io_offset      = 0,
+
+};
+
+#ifdef __MIPSEB__
+#define PCI_ENDIAN_FLAG PCILBAC_sb_m
+#else
+#define PCI_ENDIAN_FLAG 0
+#endif
+
+static int __init rc32434_pcibridge_init(void)
+{
+	unsigned int pcicValue, pcicData = 0;
+	unsigned int dummyRead, pciCntlVal;
+	int loopCount;
+	unsigned int pciConfigAddr;
+
+	pcicValue = rc32434_pci->pcic;
+	pcicValue = (pcicValue >> PCIM_SHFT) & PCIM_BIT_LEN;
+	if (!((pcicValue == PCIM_H_EA) ||
+		 (pcicValue == PCIM_H_IA_FIX) ||
+		(pcicValue == PCIM_H_IA_RR))) {
+		printk("PCI init error!!!\n");
+		/* Not in Host Mode, return ERROR */
+		return -1;
+	}
+	/* Enables the Idle Grant mode, Arbiter Parking */
+	pcicData |=(PCIC_igm_m|PCIC_eap_m|PCIC_en_m);
+	rc32434_pci->pcic = pcicData; /* Enable the PCI bus Interface */
+	/* Zero out the PCI status & PCI Status Mask */
+	for(;;)
+	{
+	   pcicData = rc32434_pci->pcis;
+	   if (!(pcicData & PCIS_rip_m))
+		    break;
+	}
+
+	rc32434_pci->pcis = 0;
+	rc32434_pci->pcism = 0xFFFFFFFF;
+	/* Zero out the PCI decoupled registers */
+	rc32434_pci->pcidac=0; /* disable PCI decoupled accesses at initialization */
+	rc32434_pci->pcidas=0; /* clear the status */
+	rc32434_pci->pcidasm=0x0000007F; /* Mask all the interrupts */
+	/* Mask PCI Messaging Interrupts */
+	rc32434_pci_msg->pciiic = 0;
+	rc32434_pci_msg->pciiim = 0xFFFFFFFF;
+	rc32434_pci_msg->pciioic = 0;
+	rc32434_pci_msg->pciioim = 0;
+
+
+	/* Setup PCILB0 as Memory Window */
+	rc32434_pci->pcilba[0].a = (unsigned int) (PCI_ADDR_START);
+
+	/* setup the PCI map address as same as the local address */
+
+	rc32434_pci->pcilba[0].m = (unsigned int) (PCI_ADDR_START);
+
+
+	/* Setup PCILBA1 as MEM */
+	rc32434_pci->pcilba[0].c = ( ((SIZE_256MB & 0x1f) << PCILBAC_size_b) | PCI_ENDIAN_FLAG);
+	dummyRead = rc32434_pci->pcilba[0].c; /* flush the CPU write Buffers */
+	rc32434_pci->pcilba[1].a = 0x60000000;
+	rc32434_pci->pcilba[1].m = 0x60000000;
+
+	/* setup PCILBA2 as IO Window*/
+	rc32434_pci->pcilba[1].c = (((SIZE_256MB & 0x1f) << PCILBAC_size_b )| PCI_ENDIAN_FLAG);
+	dummyRead = rc32434_pci->pcilba[1].c; /* flush the CPU write Buffers */
+	rc32434_pci->pcilba[2].a = 0x18C00000;
+	rc32434_pci->pcilba[2].m = 0x18FFFFFF;
+
+	/* setup PCILBA2 as IO Window*/
+	rc32434_pci->pcilba[2].c = (((SIZE_4MB & 0x1f) << PCILBAC_size_b) | PCI_ENDIAN_FLAG );
+	dummyRead = rc32434_pci->pcilba[2].c; /* flush the CPU write Buffers */
+
+	/* Setup PCILBA3 as IO Window */
+	rc32434_pci->pcilba[3].a = 0x18800000;
+	rc32434_pci->pcilba[3].m = 0x18800000;
+	rc32434_pci->pcilba[3].c = ( (((SIZE_1MB & 0x1ff) << PCILBAC_size_b) | PCILBAC_msi_m) | PCI_ENDIAN_FLAG);
+	dummyRead = rc32434_pci->pcilba[3].c; /* flush the CPU write Buffers */
+
+	pciConfigAddr=(unsigned int)(0x80000004);
+	for(loopCount=0;loopCount<24;loopCount++){
+		rc32434_pci->pcicfga=pciConfigAddr;
+		dummyRead=rc32434_pci->pcicfga;
+		rc32434_pci->pcicfgd = korinaCnfgRegs[loopCount];
+		dummyRead=rc32434_pci->pcicfgd;
+		pciConfigAddr += 4;
+	}
+	rc32434_pci->pcitc = (unsigned int)((PCITC_RTIMER_VAL&0xff) << PCITC_rtimer_b)
+		| ((PCITC_DTIMER_VAL&0xff) << PCITC_dtimer_b);
+
+	pciCntlVal=rc32434_pci->pcic;
+	pciCntlVal &=~(PCIC_tnr_m);
+	rc32434_pci->pcic = pciCntlVal;
+	pciCntlVal=rc32434_pci->pcic;
+	return 0;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	if (PCI_SLOT(dev->devfn) == 6 && dev->bus->number == 0) {
+		/* disable prefetched memory range */
+		pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
+		pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10);
+
+		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4);
+	}
+	return 0;
+}
+
+static int __init rc32434_pci_init(void)
+{
+	printk("PCI: Initializing PCI\n");
+
+	ioport_resource.start = rc32434_res_pci_io1.start;
+	ioport_resource.end = rc32434_res_pci_io1.end;
+
+	rc32434_pcibridge_init();
+
+	register_pci_controller(&rc32434_controller);
+	rc32434_sync();
+}
+
+arch_initcall(rc32434_pci_init);
+
diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/Makefile b/target/linux/rb532-2.6/files/arch/mips/rb500/Makefile
new file mode 100644
index 0000000000..3a6a2855a3
--- /dev/null
+++ b/target/linux/rb532-2.6/files/arch/mips/rb500/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the RB500 board specific parts of the kernel
+#
+
+obj-y	 += irq.o time.o setup.o serial.o prom.o misc.o devices.o
diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/devices.c b/target/linux/rb532-2.6/files/arch/mips/rb500/devices.c
new file mode 100644
index 0000000000..079eb09602
--- /dev/null
+++ b/target/linux/rb532-2.6/files/arch/mips/rb500/devices.c
@@ -0,0 +1,210 @@
+/*
+ *  RouterBoard 500 Platform devices
+ *
+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ *
+ *  $Id$
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <asm/unaligned.h>
+#include <asm/io.h>
+
+#include <asm/rc32434/rc32434.h>
+#include <asm/rc32434/dma.h>
+#include <asm/rc32434/dma_v.h>
+#include <asm/rc32434/eth.h>
+#include <asm/rc32434/rb.h>
+
+#define ETH0_DMA_RX_IRQ   	GROUP1_IRQ_BASE + 0
+#define ETH0_DMA_TX_IRQ   	GROUP1_IRQ_BASE + 1 
+#define ETH0_RX_OVR_IRQ   	GROUP3_IRQ_BASE + 9
+#define ETH0_TX_UND_IRQ   	GROUP3_IRQ_BASE + 10
+
+#define ETH0_RX_DMA_ADDR  (DMA0_PhysicalAddress + 0*DMA_CHAN_OFFSET)
+#define ETH0_TX_DMA_ADDR  (DMA0_PhysicalAddress + 1*DMA_CHAN_OFFSET)
+
+static struct resource korina_dev0_res[] = {
+	{
+		.name  = "korina_regs",
+		.start = ETH0_PhysicalAddress,
+		.end   = ETH0_PhysicalAddress + sizeof(ETH_t),
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "korina_rx",
+		.start = ETH0_DMA_RX_IRQ,
+		.end   = ETH0_DMA_RX_IRQ,
+		.flags = IORESOURCE_IRQ
+	},
+	{
+		.name  = "korina_tx",
+		.start = ETH0_DMA_TX_IRQ,
+		.end   = ETH0_DMA_TX_IRQ,
+		.flags = IORESOURCE_IRQ
+	},
+	{
+		.name  = "korina_ovr",
+		.start = ETH0_RX_OVR_IRQ,
+		.end   = ETH0_RX_OVR_IRQ,
+		.flags = IORESOURCE_IRQ
+	},
+	{
+		.name  = "korina_und",
+		.start = ETH0_TX_UND_IRQ,
+		.end   = ETH0_TX_UND_IRQ,
+		.flags = IORESOURCE_IRQ
+	},
+	{
+		.name  = "korina_dma_rx",
+		.start = ETH0_RX_DMA_ADDR,
+		.end   = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "korina_dma_tx",
+		.start = ETH0_TX_DMA_ADDR,
+		.end   = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static struct korina_device korina_dev0_data = {
+	.name = "korina0",
+	.mac = { 0xde, 0xca, 0xff, 0xc0, 0xff, 0xee }
+};
+
+static struct platform_device korina_dev0 = {
+	.id = 0,
+	.name = "korina",
+	.dev.platform_data = &korina_dev0_data,
+	.resource = korina_dev0_res,
+	.num_resources = ARRAY_SIZE(korina_dev0_res),
+};
+
+
+#define CF_GPIO_NUM 13
+
+static struct resource cf_slot0_res[] = {
+	{
+		.name  = "cf_membase",
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.name  = "cf_irq",
+		.start = (8 + 4 * 32 + CF_GPIO_NUM),  /* 149 */
+		.end   = (8 + 4 * 32 + CF_GPIO_NUM),
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct cf_device cf_slot0_data = {
+	.gpio_pin = 13
+};
+
+static struct platform_device cf_slot0 = {
+	.id = 0,
+	.name = "rb500-cf",
+	.dev.platform_data = &cf_slot0_data,
+	.resource = cf_slot0_res,
+	.num_resources = ARRAY_SIZE(cf_slot0_res),
+};
+
+/* Resources and device for NAND.  There is no data needed and no irqs, so just define the memory used. */
+static struct resource nand_slot0_res[] = {
+	{
+		.name = "nand_membase",
+		.flags = IORESOURCE_MEM	
+	}
+};
+ 
+static struct platform_device nand_slot0 = {
+	.id = 0,
+	.name = "rb500-nand",
+	.resource = nand_slot0_res,
+	.num_resources = ARRAY_SIZE(nand_slot0_res),
+};
+
+
+static struct platform_device *rb500_devs[] = {
+	&korina_dev0,
+	&nand_slot0,
+	&cf_slot0
+};
+
+static void __init parse_mac_addr(char* macstr)
+{
+	int i, j;
+	unsigned char result, value;
+	
+	for (i=0; i<6; i++) {
+		result = 0;
+		if (i != 5 && *(macstr+2) != ':') {
+			return;
+		}				
+		for (j=0; j<2; j++) {
+			if (isxdigit(*macstr) && (value = isdigit(*macstr) ? *macstr-'0' : 
+						  toupper(*macstr)-'A'+10) < 16) {
+				result = result*16 + value;
+				macstr++;
+			} 
+			else return;
+		}
+		
+		macstr++; 
+		korina_dev0_data.mac[i] = result;
+	}
+}
+
+
+/* DEVICE CONTROLLER 1 */
+#define CFG_DC_DEV1 (void*)0xb8010010
+#define CFG_DC_DEV2 (void*)0xb8010020
+#define CFG_DC_DEVBASE    0x0
+#define CFG_DC_DEVMASK    0x4
+#define CFG_DC_DEVC       0x8
+#define CFG_DC_DEVTC      0xC
+
+
+static int __init plat_setup_devices(void)
+{
+	/* Look for the CF card reader */
+	if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK))
+		rb500_devs[1] = NULL;
+	else {
+		cf_slot0_res[0].start = readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
+		cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
+	}
+	
+	/* There is always a NAND device */
+	nand_slot0_res[0].start = readl( CFG_DC_DEV2 + CFG_DC_DEVBASE);
+	nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
+		
+	return platform_add_devices(rb500_devs, ARRAY_SIZE(rb500_devs));
+}
+
+static int __init setup_kmac(char *s)
+{
+    printk("korina mac = %s\n",s);
+	parse_mac_addr(s);
+    return 0;
+}
+
+__setup("kmac=", setup_kmac);
+arch_initcall(plat_setup_devices);
+
+
diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/irq.c b/target/linux/rb532-2.6/files/arch/mips/rb500/irq.c
new file mode 100644
index 0000000000..47521c7c57
--- /dev/null
+++ b/target/linux/rb532-2.6/files/arch/mips/rb500/irq.c
@@ -0,0 +1,264 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	RC32434 interrupt routines.
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *		stevel@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/rc32434/rc32434.h>
+#include <asm/rc32434/gpio.h>
+
+extern void set_debug_traps(void);
+extern irq_cpustat_t irq_stat [NR_CPUS];
+unsigned int local_bh_count[NR_CPUS];
+unsigned int local_irq_count[NR_CPUS];
+
+static unsigned int startup_irq(unsigned int irq);
+static void rb500_end_irq(unsigned int irq_nr);
+static void mask_and_ack_irq(unsigned int irq_nr);
+static void rb500_enable_irq(unsigned int irq_nr);
+static void rb500_disable_irq(unsigned int irq_nr);
+
+extern void __init init_generic_irq(void);
+
+typedef struct {
+  u32 mask;       /* mask of valid bits in pending/mask registers */
+  volatile u32 *base_addr;
+} intr_group_t;
+
+#define RC32434_NR_IRQS  (GROUP4_IRQ_BASE + 32)
+
+#if (NR_IRQS < RC32434_NR_IRQS)
+#error Too little irqs defined. Did you override <asm/irq.h> ?
+#endif
+
+static const intr_group_t intr_group[NUM_INTR_GROUPS] = {
+  { 0x0000efff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET) },
+  { 0x00001fff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET) },
+  { 0x00000007, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET) },
+  { 0x0003ffff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET) },
+  { 0xffffffff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET) }
+};
+
+#define READ_PEND(base) (*(base))
+#define READ_MASK(base) (*(base + 2))
+#define WRITE_MASK(base, val) (*(base + 2) = (val))
+
+static inline int irq_to_group(unsigned int irq_nr)
+{
+  return ((irq_nr - GROUP0_IRQ_BASE) >> 5);
+}
+
+static inline int group_to_ip(unsigned int group)
+{
+  return group + 2;
+}
+
+static inline void enable_local_irq(unsigned int ip)
+{
+  int ipnum = 0x100 << ip;
+  clear_c0_cause(ipnum);
+  set_c0_status(ipnum);
+}
+
+static inline void disable_local_irq(unsigned int ip)
+{
+  int ipnum = 0x100 << ip;
+  clear_c0_status(ipnum);
+}
+
+static inline void ack_local_irq(unsigned int ip)
+{
+  int ipnum = 0x100 << ip;
+  clear_c0_cause(ipnum);
+}
+
+static void rb500_enable_irq(unsigned int irq_nr)
+{
+  int           ip = irq_nr - GROUP0_IRQ_BASE;
+  unsigned int  group, intr_bit;
+  volatile unsigned int  *addr;
+  
+  
+  if (ip < 0)
+    enable_local_irq(irq_nr);
+  else {
+    group = ip >> 5;
+ 
+    ip &= (1<<5)-1;
+    intr_bit = 1 << ip;
+ 
+    enable_local_irq(group_to_ip(group));
+    
+    addr = intr_group[group].base_addr;
+    WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit);
+  }
+}
+
+static void rb500_disable_irq(unsigned int irq_nr)
+{
+  int           ip = irq_nr - GROUP0_IRQ_BASE;
+  unsigned int  group, intr_bit, mask;
+  volatile unsigned int  *addr;
+  
+  if (ip < 0) {
+	disable_local_irq(irq_nr);
+    }else{
+    group = ip >> 5;
+    
+    ip &= (1<<5) -1;
+    intr_bit = 1 << ip;
+    addr = intr_group[group].base_addr;
+    mask = READ_MASK(addr);
+    mask |= intr_bit;
+    WRITE_MASK(addr,mask);
+   
+    /*
+     * if there are no more interrupts enabled in this
+     * group, disable corresponding IP
+     */
+    if (mask == intr_group[group].mask)
+      disable_local_irq(group_to_ip(group));
+  }
+}
+
+static unsigned int startup_irq(unsigned int irq_nr)
+{
+  rb500_enable_irq(irq_nr);
+  return 0; 
+}
+
+static void shutdown_irq(unsigned int irq_nr)
+{
+  rb500_disable_irq(irq_nr);
+  return;
+}
+
+static void mask_and_ack_irq(unsigned int irq_nr)
+{
+  rb500_disable_irq(irq_nr);
+  ack_local_irq(group_to_ip(irq_to_group(irq_nr)));
+}
+
+static void rb500_end_irq(unsigned int irq_nr)
+{
+
+  int ip = irq_nr - GROUP0_IRQ_BASE;
+  unsigned int intr_bit, group;
+  volatile unsigned int *addr;
+
+	if ((irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+		printk("warning: end_irq %d did not enable (%x)\n", 
+			irq_nr, irq_desc[irq_nr].status);
+		return;
+	}
+	
+	if (ip < 0) {
+		enable_local_irq(irq_nr);
+	} else {
+		group = ip >> 5;
+	
+		ip &= (1 << 5) - 1;
+		intr_bit = 1 << ip;
+	
+		if (irq_nr >= GROUP4_IRQ_BASE && irq_nr <= (GROUP4_IRQ_BASE + 13)) {
+			gpio->gpioistat = gpio->gpioistat & ~intr_bit;
+		}
+	
+		enable_local_irq(group_to_ip(group));
+	
+		addr = intr_group[group].base_addr;
+		WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit);
+	}
+}
+
+static struct hw_interrupt_type rc32434_irq_type = {
+  .typename = "RB500",
+  .startup = startup_irq,
+  .shutdown = shutdown_irq,
+  .enable = rb500_enable_irq,
+  .disable = rb500_disable_irq,
+  .ack = mask_and_ack_irq,
+  .end = rb500_end_irq,
+};
+
+
+void __init arch_init_irq(void)
+{
+	int i;
+
+	printk("Initializing IRQ's: %d out of %d\n", RC32434_NR_IRQS, NR_IRQS);
+	memset(irq_desc, 0, sizeof(irq_desc));
+  
+	for (i = 0; i < RC32434_NR_IRQS; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = NULL;
+		irq_desc[i].depth = 1;
+		irq_desc[i].chip = &rc32434_irq_type;
+		spin_lock_init(&irq_desc[i].lock);
+	}
+}
+
+/* Main Interrupt dispatcher */
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int ip, pend, group;
+	volatile unsigned int *addr;
+	unsigned int cp0_cause = read_c0_cause() & read_c0_status();
+
+	if (cp0_cause & CAUSEF_IP7) {
+		ll_timer_interrupt(7);
+	} else if ((ip = (cp0_cause & 0x7c00))) {
+		group = 21 - rc32434_clz(ip);
+
+		addr = intr_group[group].base_addr;
+
+		pend = READ_PEND(addr);
+		pend &= ~READ_MASK(addr); // only unmasked interrupts
+		pend = 39 - rc32434_clz(pend);
+		do_IRQ((group << 5) + pend);
+	}
+}
diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/misc.c b/target/linux/rb532-2.6/files/arch/mips/rb500/misc.c
new file mode 100644
index 0000000000..42039b7aae
--- /dev/null
+++ b/target/linux/rb532-2.6/files/arch/mips/rb500/misc.c
@@ -0,0 +1,56 @@
+#include <linux/module.h>
+#include <linux/kernel.h>   /* printk() */
+#include <linux/types.h>    /* size_t */
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <asm/rc32434/rb.h>
+
+#define GPIO_BADDR  0xb8050000
+
+
+static volatile unsigned char *devCtl3Base = 0;
+static unsigned char latchU5State = 0;
+static spinlock_t clu5Lock = SPIN_LOCK_UNLOCKED;
+
+void set434Reg(unsigned regOffs, unsigned bit, unsigned len, unsigned val) {
+    unsigned flags, data;
+    unsigned i = 0;
+    spin_lock_irqsave(&clu5Lock, flags);
+    data = *(volatile unsigned *) (IDT434_REG_BASE + regOffs);
+    for (i = 0; i != len; ++i) {
+	if (val & (1 << i)) data |= (1 << (i + bit));
+	else data &= ~(1 << (i + bit));
+    }
+    *(volatile unsigned *) (IDT434_REG_BASE + regOffs) = data;
+    spin_unlock_irqrestore(&clu5Lock, flags);
+}
+
+void changeLatchU5(unsigned char orMask, unsigned char nandMask) {
+    unsigned flags;
+    spin_lock_irqsave(&clu5Lock, flags);
+    latchU5State = (latchU5State | orMask) & ~nandMask;
+    if( !devCtl3Base) devCtl3Base = (volatile unsigned char *)
+	        KSEG1ADDR(*(volatile unsigned *) KSEG1ADDR(0x18010030));
+    *devCtl3Base = latchU5State;
+    spin_unlock_irqrestore(&clu5Lock, flags);
+}
+
+u32 gpio_get(gpio_func func)
+{
+	return readl((void *) GPIO_BADDR + func);
+}
+
+void gpio_set(gpio_func func, u32 mask, u32 value)
+{
+	u32 val = readl((void *) GPIO_BADDR + func);
+	
+	val &= ~mask;
+	val |= value & mask;
+	
+	writel(val, (void *) GPIO_BADDR + func);
+}
+
+EXPORT_SYMBOL(gpio_set);
+EXPORT_SYMBOL(gpio_get);
+EXPORT_SYMBOL(set434Reg);
+EXPORT_SYMBOL(changeLatchU5);
diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/prom.c b/target/linux/rb532-2.6/files/arch/mips/rb500/prom.c
new file mode 100644
index 0000000000..1978b0f17c
--- /dev/null
+++ b/target/linux/rb532-2.6/files/arch/mips/rb500/prom.c
@@ -0,0 +1,165 @@
+/*
+* prom.c 
+**********************************************************************
+* P . Sadik Oct 10, 2003
+*
+* Started change log
+* idt_cpu_freq is make a kernel configuration parameter
+* idt_cpu_freq is exported so that other modules can use it.
+* Code cleanup
+**********************************************************************
+* P. Sadik Oct 20, 2003
+*
+* Removed NVRAM code from here, since they are already available under
+* nvram directory.
+* Added serial port initialisation.
+**********************************************************************
+**********************************************************************
+* P. Sadik Oct 30, 2003
+*
+* Added reset_cons_port
+**********************************************************************
+
+  P.Christeas, 2005-2006
+  Port to 2.6, add 2.6 cmdline parsing
+
+*/
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/console.h>
+#include <asm/bootinfo.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <asm/rc32434/ddr.h>
+
+#define PROM_ENTRY(x)   (0xbfc00000+((x)*8))
+extern void __init setup_serial_port(void);
+
+unsigned int idt_cpu_freq = 132000000;
+EXPORT_SYMBOL(idt_cpu_freq);
+unsigned int board_type = 500;
+EXPORT_SYMBOL(board_type);
+unsigned int gpio_bootup_state = 0;
+EXPORT_SYMBOL(gpio_bootup_state);
+
+
+char mips_mac_address[18] = "08:00:06:05:40:01";
+EXPORT_SYMBOL(mips_mac_address);
+
+/* what to append to cmdline when button is [not] pressed */
+#define GPIO_INIT_NOBUTTON ""
+#define GPIO_INIT_BUTTON   " 2"
+
+#ifdef CONFIG_MIKROTIK_RB500
+unsigned soft_reboot = 0;
+EXPORT_SYMBOL(soft_reboot);
+#endif
+
+#define SR_NMI			0x00180000      /* NMI */
+#define SERIAL_SPEED_ENTRY	0x00000001
+
+#ifdef CONFIG_REMOTE_DEBUG
+extern int remote_debug;
+#endif
+
+extern unsigned long mips_machgroup;
+extern unsigned long mips_machtype;
+
+#define FREQ_TAG   "HZ="
+#define GPIO_TAG   "gpio="
+#define KMAC_TAG   "kmac="
+#define MEM_TAG	   "mem="
+#define BOARD_TAG  "board="
+#define IGNORE_CMDLINE_MEM 1
+#define DEBUG_DDR
+
+void parse_soft_settings(unsigned *ptr, unsigned size);
+void parse_hard_settings(unsigned *ptr, unsigned size);
+
+void __init prom_setup_cmdline(void);
+
+void __init prom_init(void)
+{
+	DDR_t ddr = (DDR_t) DDR_VirtualAddress; /* define the pointer to the DDR registers */
+	phys_t memsize = 0-ddr->ddrmask;
+	
+	/* this should be the very first message, even before serial is properly initialized */
+	prom_setup_cmdline();
+	setup_serial_port();
+
+	mips_machgroup = MACH_GROUP_MIKROTIK;
+	soft_reboot = read_c0_status() & SR_NMI;
+	pm_power_off = NULL;
+
+	/*
+	 * give all RAM to boot allocator,
+	 * except for the first 0x400 and the last 0x200 bytes
+	 */
+	add_memory_region(ddr->ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM);
+}
+
+void prom_free_prom_memory(void)
+{
+	/* FIXME: STUB */
+}
+
+extern char _image_cmdline;
+void __init prom_setup_cmdline(void){
+	char cmd_line[CL_SIZE];
+	char *cp;
+	int prom_argc;
+	char **prom_argv, **prom_envp;
+	int i;
+	
+	prom_argc = fw_arg0;
+	prom_argv = (char **) fw_arg1;
+	prom_envp = (char **) fw_arg2;
+	
+	cp=cmd_line;
+		/* Note: it is common that parameters start at argv[1] and not argv[0],
+		however, our elf loader starts at [0] */
+	for(i=0;i<prom_argc;i++){
+		if (strncmp(prom_argv[i], FREQ_TAG, sizeof(FREQ_TAG) - 1) == 0) {
+			idt_cpu_freq = simple_strtoul(prom_argv[i] + sizeof(FREQ_TAG) - 1, 0, 10);
+			continue;
+		}
+#ifdef IGNORE_CMDLINE_MEM
+		/* parses out the "mem=xx" arg */
+		if (strncmp(prom_argv[i], MEM_TAG, sizeof(MEM_TAG) - 1) == 0) {
+			continue;
+		}
+#endif
+		if (i>0) *(cp++) = ' ';
+		if (strncmp(prom_argv[i], BOARD_TAG, sizeof(BOARD_TAG) - 1) == 0) {
+			board_type =  simple_strtoul(prom_argv[i] + sizeof(BOARD_TAG) - 1, 0, 10);
+		}
+		if (strncmp(prom_argv[i], GPIO_TAG, sizeof(GPIO_TAG) - 1) == 0) {
+			gpio_bootup_state =  simple_strtoul(prom_argv[i] + sizeof(GPIO_TAG) - 1, 0, 10);
+		}
+		strcpy(cp,prom_argv[i]);
+		cp+=strlen(prom_argv[i]);
+	}
+	*(cp++) = ' ';
+	strcpy(cp,(&_image_cmdline + 8));
+	cp += strlen(&_image_cmdline);
+	
+	i=strlen(arcs_cmdline);
+	if (i>0){
+		*(cp++) = ' ';
+		strcpy(cp,arcs_cmdline);
+		cp+=strlen(arcs_cmdline);
+	}
+	if (gpio_bootup_state&0x02)
+		strcpy(cp,GPIO_INIT_NOBUTTON);
+	else
+		strcpy(cp,GPIO_INIT_BUTTON);
+	cmd_line[CL_SIZE-1] = '\0';
+	
+	strcpy(arcs_cmdline,cmd_line);
+}
+
diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/prom.c.orig b/target/linux/rb532-2.6/files/arch/mips/rb500/prom.c.orig
new file mode 100644
index 0000000000..47569c0a25
--- /dev/null
+++ b/target/linux/rb532-2.6/files/arch/mips/rb500/prom.c.orig
@@ -0,0 +1,161 @@
+/*
+* prom.c 
+**********************************************************************
+* P . Sadik Oct 10, 2003
+*
+* Started change log
+* idt_cpu_freq is make a kernel configuration parameter
+* idt_cpu_freq is exported so that other modules can use it.
+* Code cleanup
+**********************************************************************
+* P. Sadik Oct 20, 2003
+*
+* Removed NVRAM code from here, since they are already available under
+* nvram directory.
+* Added serial port initialisation.
+**********************************************************************
+**********************************************************************
+* P. Sadik Oct 30, 2003
+*
+* Added reset_cons_port
+**********************************************************************
+
+  P.Christeas, 2005-2006
+  Port to 2.6, add 2.6 cmdline parsing
+
+*/
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/console.h>
+#include <asm/bootinfo.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <asm/rc32434/ddr.h>
+
+#define PROM_ENTRY(x)   (0xbfc00000+((x)*8))
+extern void __init setup_serial_port(void);
+
+unsigned int idt_cpu_freq = 132000000;
+EXPORT_SYMBOL(idt_cpu_freq);
+unsigned int board_type = 500;
+EXPORT_SYMBOL(board_type);
+unsigned int gpio_bootup_state = 0;
+EXPORT_SYMBOL(gpio_bootup_state);
+
+
+char mips_mac_address[18] = "08:00:06:05:40:01";
+EXPORT_SYMBOL(mips_mac_address);
+
+/* what to append to cmdline when button is [not] pressed */
+#define GPIO_INIT_NOBUTTON ""
+#define GPIO_INIT_BUTTON   " 2"
+
+#ifdef CONFIG_MIKROTIK_RB500
+unsigned soft_reboot = 0;
+EXPORT_SYMBOL(soft_reboot);
+#endif
+
+#define SR_NMI			0x00180000      /* NMI */
+#define SERIAL_SPEED_ENTRY	0x00000001
+
+#ifdef CONFIG_REMOTE_DEBUG
+extern int remote_debug;
+#endif
+
+extern unsigned long mips_machgroup;
+extern unsigned long mips_machtype;
+
+#define FREQ_TAG   "HZ="
+#define GPIO_TAG   "gpio="
+#define KMAC_TAG   "kmac="
+#define MEM_TAG	   "mem="
+#define BOARD_TAG  "board="
+#define IGNORE_CMDLINE_MEM 1
+#define DEBUG_DDR
+
+void parse_soft_settings(unsigned *ptr, unsigned size);
+void parse_hard_settings(unsigned *ptr, unsigned size);
+
+void __init prom_setup_cmdline(void);
+
+void __init prom_init(void)
+{
+	DDR_t ddr = (DDR_t) DDR_VirtualAddress; /* define the pointer to the DDR registers */
+	phys_t memsize = 0-ddr->ddrmask;
+	
+	/* this should be the very first message, even before serial is properly initialized */
+	prom_setup_cmdline();
+	setup_serial_port();
+
+	mips_machgroup = MACH_GROUP_MIKROTIK;
+	soft_reboot = read_c0_status() & SR_NMI;
+	pm_power_off = NULL;
+
+	/*
+	 * give all RAM to boot allocator,
+	 * except for the first 0x400 and the last 0x200 bytes
+	 */
+	add_memory_region(ddr->ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM);
+}
+
+void prom_free_prom_memory(void)
+{
+	/* FIXME: STUB */
+}
+
+void __init prom_setup_cmdline(void){
+	char cmd_line[CL_SIZE];
+	char *cp;
+	int prom_argc;
+	char **prom_argv, **prom_envp;
+	int i;
+	
+	prom_argc = fw_arg0;
+	prom_argv = (char **) fw_arg1;
+	prom_envp = (char **) fw_arg2;
+	
+	cp=cmd_line;
+		/* Note: it is common that parameters start at argv[1] and not argv[0],
+		however, our elf loader starts at [0] */
+	for(i=0;i<prom_argc;i++){
+		if (strncmp(prom_argv[i], FREQ_TAG, sizeof(FREQ_TAG) - 1) == 0) {
+			idt_cpu_freq = simple_strtoul(prom_argv[i] + sizeof(FREQ_TAG) - 1, 0, 10);
+			continue;
+		}
+#ifdef IGNORE_CMDLINE_MEM
+		/* parses out the "mem=xx" arg */
+		if (strncmp(prom_argv[i], MEM_TAG, sizeof(MEM_TAG) - 1) == 0) {
+			continue;
+		}
+#endif
+		if (i>0) *(cp++) = ' ';
+		if (strncmp(prom_argv[i], BOARD_TAG, sizeof(BOARD_TAG) - 1) == 0) {
+			board_type =  simple_strtoul(prom_argv[i] + sizeof(BOARD_TAG) - 1, 0, 10);
+		}
+		if (strncmp(prom_argv[i], GPIO_TAG, sizeof(GPIO_TAG) - 1) == 0) {
+			gpio_bootup_state =  simple_strtoul(prom_argv[i] + sizeof(GPIO_TAG) - 1, 0, 10);
+		}
+		strcpy(cp,prom_argv[i]);
+		cp+=strlen(prom_argv[i]);
+	}
+	
+	i=strlen(arcs_cmdline);
+	if (i>0){
+		*(cp++) = ' ';
+		strcpy(cp,arcs_cmdline);
+		cp+=strlen(arcs_cmdline);
+	}
+	if (gpio_bootup_state&0x02)
+		strcpy(cp,GPIO_INIT_NOBUTTON);
+	else
+		strcpy(cp,GPIO_INIT_BUTTON);
+	cmd_line[CL_SIZE-1] = '\0';
+	
+	strcpy(arcs_cmdline,cmd_line);
+}
+
diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/serial.c b/target/linux/rb532-2.6/files/arch/mips/rb500/serial.c
new file mode 100644
index 0000000000..49c5252feb
--- /dev/null
+++ b/target/linux/rb532-2.6/files/arch/mips/rb500/serial.c
@@ -0,0 +1,77 @@
+/**************************************************************************
+ *
+ *  BRIEF MODULE DESCRIPTION
+ *     Serial port initialisation.
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *         
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ **************************************************************************
+ * May 2004 rkt, neb
+ *
+ * Initial Release
+ *
+ * 
+ *
+ **************************************************************************
+ */
+
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/time.h>
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/serial.h>
+#include <asm/rc32434/rc32434.h>
+
+extern unsigned int idt_cpu_freq;
+
+static struct uart_port serial_req = {
+	.type = PORT_16550A,
+	.line = 0,
+	.irq = RC32434_UART0_IRQ,
+	.flags = STD_COM_FLAGS,
+	.iotype = UPIO_MEM,
+	.membase = (char *) KSEG1ADDR(RC32434_UART0_BASE),
+//	.fifosize = 14
+	.regshift = 2
+};
+
+int __init setup_serial_port(void)
+{
+	serial_req.uartclk = idt_cpu_freq;
+
+	if (early_serial_setup(&serial_req))
+		return -ENODEV;
+	
+	return(0);
+}
diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/setup.c b/target/linux/rb532-2.6/files/arch/mips/rb500/setup.c
new file mode 100644
index 0000000000..ee6bfb7235
--- /dev/null
+++ b/target/linux/rb532-2.6/files/arch/mips/rb500/setup.c
@@ -0,0 +1,81 @@
+/*
+ * setup.c - boot time setup code
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/irq.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+#include <asm/pgtable.h>
+#include <asm/reboot.h>
+#include <asm/addrspace.h>     /* for KSEG1ADDR() */
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/rc32434/rc32434.h>
+#include <asm/rc32434/pci.h>
+
+#ifdef CONFIG_PCI
+extern void *rc32434_time_init(void);
+extern int __init rc32434_pcibridge_init(void);
+#endif
+
+#define epldMask ((volatile unsigned char *)0xB900000d)
+
+static void rb_machine_restart(char *command)
+{
+	/* just jump to the reset vector */
+	* (volatile unsigned *) KSEG1ADDR(0x18008000) = 0x80000001;
+	((void (*)(void))KSEG1ADDR(0x1FC00000u))();
+}
+
+static void rb_machine_halt(void)
+{
+	for(;;) continue;
+}
+
+#ifdef CONFIG_CPU_HAS_WB
+void (*__wbflush) (void);
+
+static void rb_write_buffer_flush(void)
+{
+	__asm__ __volatile__
+	    ("sync\n\t" "nop\n\t" "loop: bc0f loop\n\t" "nop\n\t");
+}
+#endif
+
+void __init plat_mem_setup(void)
+{
+	unsigned int pciCntlVal;
+
+	board_time_init = rc32434_time_init;
+
+#ifdef CONFIG_CPU_HAS_WB
+	__wbflush = rb_write_buffer_flush;
+#endif
+	_machine_restart = rb_machine_restart;
+	_machine_halt = rb_machine_halt;
+	/*_machine_power_off = rb_machine_power_halt;*/
+	pm_power_off = rb_machine_halt;
+
+	set_io_port_base(KSEG1);
+
+	pciCntlVal=rc32434_pci->pcic;
+	pciCntlVal &= 0xFFFFFF7;
+	rc32434_pci->pcic = pciCntlVal;
+
+#ifdef CONFIG_PCI
+	/* Enable PCI interrupts in EPLD Mask register */
+	*epldMask = 0x0;
+	*(epldMask + 1) = 0x0;
+#endif
+	write_c0_wired(0);
+}
+
+const char *get_system_type(void)
+{
+	return "MIPS RB500";
+}
diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/time.c b/target/linux/rb532-2.6/files/arch/mips/rb500/time.c
new file mode 100644
index 0000000000..3490c94dc9
--- /dev/null
+++ b/target/linux/rb532-2.6/files/arch/mips/rb500/time.c
@@ -0,0 +1,93 @@
+/*
+****************************************************************************
+* Carsten Langgaard, carstenl@mips.com
+* Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+*
+***************************************************************************
+*
+*  This program is free software; you can distribute it and/or modify it
+*  under the terms of the GNU General Public License (Version 2) as
+*  published by the Free Software Foundation.
+*
+*  This program is distributed in the hope it will be useful, but WITHOUT
+*  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+*  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+*  for more details.
+*
+*  You should have received a copy of the GNU General Public License along
+*  with this program; if not, write to the Free Software Foundation, Inc.,
+*  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+*
+****************************************************************************
+*
+* Setting up the clock on the MIPS boards.
+*
+****************************************************************************
+* P. Sadik Oct 10, 2003
+*
+* Started change log.
+* mips_counter_frequency is now calculated at run time, based on idt_cpu_freq.
+* Code cleanup
+****************************************************************************
+*/
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/mc146818rtc.h>
+#include <linux/irq.h>
+#include <linux/timex.h>
+
+#include <asm/mipsregs.h>
+#include <asm/ptrace.h>
+#include <asm/debug.h>
+#include <asm/rc32434/rc32434.h>
+
+static unsigned long r4k_offset; /* Amount to incr compare reg each time */
+static unsigned long r4k_cur;    /* What counter should be at next timer irq */
+extern unsigned int mips_hpt_frequency;
+extern unsigned int idt_cpu_freq;
+
+/* 
+ * Figure out the r4k offset, the amount to increment the compare
+ * register for each time tick. There is no RTC available.
+ *
+ * The RC32434 counts at half the CPU *core* speed.
+ */
+static unsigned long __init cal_r4koff(void)
+{
+	mips_hpt_frequency = idt_cpu_freq * IDT_CLOCK_MULT / 2;
+	return (mips_hpt_frequency / HZ);
+}
+
+
+void __init rc32434_time_init(void)
+{
+	unsigned int est_freq, flags;
+
+	local_irq_save(flags);
+
+	printk("calculating r4koff... ");
+	r4k_offset = cal_r4koff();
+	printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
+
+	est_freq = 2*r4k_offset*HZ;	
+	est_freq += 5000;	/* round */
+	est_freq -= est_freq%10000;
+	printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, 
+	       (est_freq%1000000)*100/1000000);
+	local_irq_restore(flags);
+}
+
+void __init plat_timer_setup(struct irqaction *irq)
+{
+	/* we are using the cpu counter for timer interrupts */
+	setup_irq(MIPS_CPU_TIMER_IRQ, irq);
+
+	/* to generate the first timer interrupt */
+	r4k_cur = (read_c0_count() + r4k_offset);
+	write_c0_compare(r4k_cur);
+}
+