ralink: add support for netis WF-2881

netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN.
It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0.
The following patch adds support for this device.

this device only works on top of UBI.

Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons (reset button)
* ethernet switch and USB diag LEDs
* UART
* GPIOs
* sysupgrade

Tested and not working
* failsafe

Signed-off-by: YounJae Rho <luxflow@live.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47619 3c298f89-4303-0410-b956-a3cf2f4a3e73

2 files changed, 46 insertions, 1 deletions

diff --git a/target/linux/ramips/mt7621/config-3.18 b/target/linux/ramips/mt7621/config-3.18
index fb05d1e645..13ff9f8467 100644
--- a/target/linux/ramips/mt7621/config-3.18
+++ b/target/linux/ramips/mt7621/config-3.18
@@ -36,6 +36,11 @@ CONFIG_CPU_RMAP=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CSRC_R4K=y
 CONFIG_DEBUG_PINCTRL=y
 CONFIG_DMA_NONCOHERENT=y
@@ -102,6 +107,8 @@ CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_GIC=y
 CONFIG_IRQ_WORK=y
 CONFIG_LIBFDT=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_MDIO_BOARDINFO=y
 CONFIG_MIPS=y
 CONFIG_MIPS_CM=y
@@ -117,18 +124,26 @@ CONFIG_MIPS_MT_FPAFF=y
 CONFIG_MIPS_MT_SMP=y
 CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
 # CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_MTK_MTD_NAND is not set
 CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MT7621_WDT=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_SPLIT_SEAMA_FW=y
 CONFIG_MTD_SPLIT_TRX_FW=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTK_MTD_NAND=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NET_FLOW_LIMIT=y
 CONFIG_NET_RALINK=y
@@ -209,9 +224,16 @@ CONFIG_SYS_SUPPORTS_SCHED_SMT=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_TREE_RCU=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+# CONFIG_UBIFS_FS_XZ is not set
+CONFIG_UBIFS_FS_ZLIB=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USE_OF=y
 CONFIG_WATCHDOG_CORE=y
 CONFIG_WEAK_ORDERING=y
 CONFIG_XPS=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/mt7621/profiles/netis.mk b/target/linux/ramips/mt7621/profiles/netis.mk
new file mode 100644
index 0000000000..39b524f534
--- /dev/null
+++ b/target/linux/ramips/mt7621/profiles/netis.mk
@@ -0,0 +1,23 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/WF-2881
+	NAME:=NETIS WF-2881
+	PACKAGES:=\
+		kmod-usb-core kmod-usb3 kmod-usb-hid \
+		kmod-ledtrig-usbdev
+endef
+
+define Profile/WF-2881/Description
+	Package set compatible with the NETIS WF-2881 board.
+endef
+
+#-m <min io size> -e <LEB size> -c <Eraseblocks count>
+WF-2881_UBIFS_OPTS:="-m 2048 -e 129024 -c 1024"
+WF-2881_UBI_OPTS:="-m 2048 -p 128KiB -s 512"
+
+$(eval $(call Profile,WF-2881))