[ramips] move files to files-3.7

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36161 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 88 insertions, 0 deletions

diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/setup.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/setup.c
new file mode 100644
index 0000000000..6e037a7291
--- /dev/null
+++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/setup.c
@@ -0,0 +1,88 @@
+/*
+ * Ralink RT3662/RT3883 SoC specific setup
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <asm/mips_machine.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+
+#include <asm/mach-ralink/common.h>
+#include <asm/mach-ralink/rt3883.h>
+#include <asm/mach-ralink/rt3883_regs.h>
+#include "common.h"
+
+static void rt3883_restart(char *command)
+{
+	rt3883_sysc_wr(RT3883_RSTCTRL_SYS, RT3883_SYSC_REG_RSTCTRL);
+	while (1)
+		if (cpu_wait)
+			cpu_wait();
+}
+
+static void rt3883_halt(void)
+{
+	while (1)
+		if (cpu_wait)
+			cpu_wait();
+}
+
+unsigned int __cpuinit get_c0_compare_irq(void)
+{
+	return CP0_LEGACY_COMPARE_IRQ;
+}
+
+void __init ramips_soc_setup(void)
+{
+	struct clk *clk;
+
+	rt3883_sysc_base = ioremap_nocache(RT3883_SYSC_BASE, PAGE_SIZE);
+	rt3883_memc_base = ioremap_nocache(RT3883_MEMC_BASE, PAGE_SIZE);
+
+	rt3883_clocks_init();
+
+	clk = clk_get(NULL, "cpu");
+	if (IS_ERR(clk))
+		panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
+
+	printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type,
+		clk_get_rate(clk) / 1000000,
+		(clk_get_rate(clk) % 1000000) * 100 / 1000000);
+
+	_machine_restart = rt3883_restart;
+	_machine_halt = rt3883_halt;
+	pm_power_off = rt3883_halt;
+
+	clk = clk_get(NULL, "uart");
+	if (IS_ERR(clk))
+		panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
+
+	ramips_early_serial_setup(0, RT3883_UART0_BASE, clk_get_rate(clk),
+				  RT3883_INTC_IRQ_UART0);
+	ramips_early_serial_setup(1, RT3883_UART1_BASE, clk_get_rate(clk),
+				  RT3883_INTC_IRQ_UART1);
+}
+
+void __init plat_time_init(void)
+{
+	struct clk *clk;
+
+	clk = clk_get(NULL, "cpu");
+	if (IS_ERR(clk))
+		panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
+
+	mips_hpt_frequency = clk_get_rate(clk) / 2;
+}