diff options
| author | Hauke Mehrtens <hauke@openwrt.org> | 2013-09-16 21:09:10 +0000 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@openwrt.org> | 2013-09-16 21:09:10 +0000 |
| commit | 81cf14367f8ae02d06d6b906a096c2f9a8bdd961 (patch) | |
| tree | 4bc4846986603fc6055798586e63e28e29772b66 /target/linux/octeon | |
| parent | 565a027db3953ed022fdabe1d1e4058707335a1d (diff) | |
| download | master-187ad058-81cf14367f8ae02d06d6b906a096c2f9a8bdd961.tar.gz master-187ad058-81cf14367f8ae02d06d6b906a096c2f9a8bdd961.tar.bz2 master-187ad058-81cf14367f8ae02d06d6b906a096c2f9a8bdd961.zip | |
brcm47xx: Add support for Huawei E970
This patch adds support for Huawei E970 wireless gateway devices.
It has been tested on an E970 labelled as T-Mobile web'n'walk Box IV.
E960/B970 should work too, from what I know it's basically the same hardware.
The device has a Broadcom BCM5354 SoC and a built-in 3G USB modem.
It uses a hardware watchdog which needs GPIO-7 to be toggled at least
every 1-2 seconds. This patch uses gpio_wdt module (see my previous
patch today) to take care of this.
Tested and works: 3G wan, wlan+LED, VLAN config, failsafe using reset
button, image to be used for upgrade from OEM firmware's web interface
Link to the wiki page I've created: <http://wiki.openwrt.org/toh/huawei/e970>
Issue:
* lzma-loader crashes, so gzipped kernel is used. Presumably due to watchdog
reset during kernel decompress.
Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38011 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/octeon')
0 files changed, 0 insertions, 0 deletions