mvebu: drop 3.10 support

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41406 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 49 deletions

diff --git a/target/linux/mvebu/patches-3.10/0116-mtd-nand-pxa3xx-Allow-to-set-clear-the-spare-enable-.patch b/target/linux/mvebu/patches-3.10/0116-mtd-nand-pxa3xx-Allow-to-set-clear-the-spare-enable-.patch
deleted file mode 100644
index eca13b4b0d..0000000000
--- a/target/linux/mvebu/patches-3.10/0116-mtd-nand-pxa3xx-Allow-to-set-clear-the-spare-enable-.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From be5f1d59341e48dbe0730253417c52bf79c6c3a7 Mon Sep 17 00:00:00 2001
-From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Date: Mon, 12 Aug 2013 14:14:49 -0300
-Subject: [PATCH 116/203] mtd: nand: pxa3xx: Allow to set/clear the 'spare
- enable' field
-
-Some commands (such as the ONFI parameter page read) need to
-clear the 'spare enable' bit. This commit allows to set/clear
-depending on the prepared command, instead of having it always
-set.
-
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Tested-by: Daniel Mack <zonque@gmail.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
----
- drivers/mtd/nand/pxa3xx_nand.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/mtd/nand/pxa3xx_nand.c
-+++ b/drivers/mtd/nand/pxa3xx_nand.c
-@@ -185,6 +185,7 @@ struct pxa3xx_nand_info {
- 	int			cs;
- 	int			use_ecc;	/* use HW ECC ? */
- 	int			use_dma;	/* use DMA ? */
-+	int			use_spare;	/* use spare ? */
- 	int			is_ready;
- 
- 	unsigned int		page_size;	/* page size of attached chip */
-@@ -325,6 +326,11 @@ static void pxa3xx_nand_start(struct pxa
- 	else
- 		ndcr &= ~NDCR_DMA_EN;
- 
-+	if (info->use_spare)
-+		ndcr |= NDCR_SPARE_EN;
-+	else
-+		ndcr &= ~NDCR_SPARE_EN;
-+
- 	ndcr |= NDCR_ND_RUN;
- 
- 	/* clear status bits and run */
-@@ -526,6 +532,7 @@ static int prepare_command_pool(struct p
- 	info->buf_count		= 0;
- 	info->oob_size		= 0;
- 	info->use_ecc		= 0;
-+	info->use_spare		= 1;
- 	info->use_dma		= (use_dma) ? 1 : 0;
- 	info->is_ready		= 0;
- 	info->retcode		= ERR_NONE;