kirkwood: add initial support for NSA310s

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47330 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 files changed, 324 insertions, 0 deletions

diff --git a/target/linux/kirkwood/base-files/etc/uci-defaults/02_network b/target/linux/kirkwood/base-files/etc/uci-defaults/02_network
index f0628cd618..150926e3a6 100644
--- a/target/linux/kirkwood/base-files/etc/uci-defaults/02_network
+++ b/target/linux/kirkwood/base-files/etc/uci-defaults/02_network
@@ -33,6 +33,7 @@ case "$board" in
 "goflexnet"|\
 "iconnect"|\
 "ib62x0"|\
+"nsa310s"|\
 "pogo_e02")
 	set_lan_dhcp "eth0"
 	;;
diff --git a/target/linux/kirkwood/base-files/lib/kirkwood.sh b/target/linux/kirkwood/base-files/lib/kirkwood.sh
index aa16daf4c0..6e0f444d3e 100755
--- a/target/linux/kirkwood/base-files/lib/kirkwood.sh
+++ b/target/linux/kirkwood/base-files/lib/kirkwood.sh
@@ -57,6 +57,10 @@ kirkwood_board_detect() {
 		name="sheevaplug-esata"
 		;;
 
+	"ZyXEL NSA310S")
+		name="nsa310s"
+		;;
+
 	*)
 		name="generic"
 		;;
diff --git a/target/linux/kirkwood/image/Makefile b/target/linux/kirkwood/image/Makefile
index da462a271d..0aa75ff1fe 100644
--- a/target/linux/kirkwood/image/Makefile
+++ b/target/linux/kirkwood/image/Makefile
@@ -130,6 +130,9 @@ Image/InstallKernel/Template/ICONNECT=$(call Image/InstallKernel/Template,iconne
 Image/BuildKernel/Template/IOMEGA_IX2_200=$(call Image/BuildKernel/Template,iomega_ix2_200)
 Image/InstallKernel/Template/IOMEGA_IX2_200=$(call Image/InstallKernel/Template,iomega_ix2_200)
 
+Image/BuildKernel/Template/NSA310S=$(call Image/BuildKernel/Template,nsa310s)
+Image/InstallKernel/Template/NSA310S=$(call Image/InstallKernel/Template,nsa310s)
+
 Image/BuildKernel/Template/POGOE02=$(call Image/BuildKernel/Template,pogo_e02)
 Image/InstallKernel/Template/POGOE02=$(call Image/InstallKernel/Template,pogo_e02)
 
diff --git a/target/linux/kirkwood/patches-3.18/190-nsa310s.patch b/target/linux/kirkwood/patches-3.18/190-nsa310s.patch
new file mode 100644
index 0000000000..b646693763
--- /dev/null
+++ b/target/linux/kirkwood/patches-3.18/190-nsa310s.patch
@@ -0,0 +1,300 @@
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
+@@ -0,0 +1,287 @@
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6281.dtsi"
++
++/ {
++	model = "ZyXEL NSA310S";
++	compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
++
++	memory {
++		device_type = "memory";
++		reg = <0x00000000 0x10000000>;
++	};
++
++	chosen {
++		bootargs = "console=ttyS0,115200n8 earlyprintk";
++		stdout-path = &uart0;
++	};
++
++	mbus {
++		pcie-controller {
++			status = "okay";
++
++			pcie@1,0 {
++				status = "okay";
++			};
++		};
++	};
++
++	ocp@f1000000 {
++		pinctrl: pin-controller@10000 {
++			pinctrl-names = "default";
++
++			pmx_sata0: pmx-sata0 {
++				marvell,pins;
++				marvell,function = "sata0";
++			};
++			pmx_sata1: pmx-sata1 {
++				marvell,pins;
++				marvell,function = "sata1";
++			};
++			pmx_usb_power: pmx-usb-power {
++				marvell,pins = "mpp21";
++				marvell,function = "gpio";
++			};
++			pmx_pwr_off: pmx-pwr-off {
++				marvell,pins = "mpp27";
++				marvell,function = "gpio";
++			};
++			pmx_btn_reset: pmx-btn-reset {
++				marvell,pins = "mpp24";
++				marvell,function = "gpio";
++			};
++			pmx_btn_copy: pmx-btn-copy {
++				marvell,pins = "mpp25";
++				marvell,function = "gpio";
++			};
++			pmx_btn_power: pmx-btn-power {
++				marvell,pins = "mpp26";
++				marvell,function = "gpio";
++			};
++			pmx_led_hdd2_green: pmx-led-hdd2-green {
++				marvell,pins = "mpp34";
++				marvell,function = "gpio";
++			};
++			pmx_led_hdd2_red: pmx-led-hdd2-red {
++				marvell,pins = "mpp12";
++				marvell,function = "gpio";
++			};
++			pmx_led_usb_green: pmx-led-usb-green {
++				marvell,pins = "mpp15";
++				marvell,function = "gpio";
++			};
++			pmx_led_copy_green: pmx-led-copy-green {
++				marvell,pins = "mpp22";
++				marvell,function = "gpio";
++			};
++			pmx_led_copy_red: pmx-led-copy-red {
++				marvell,pins = "mpp23";
++				marvell,function = "gpio";
++			};
++			pmx_led_sys_green: pmx-led-sys-green {
++				marvell,pins = "mpp28";
++				marvell,function = "gpio";
++			};
++			pmx_led_sys_orange: pmx-led-sys-orange {
++				marvell,pins = "mpp29";
++				marvell,function = "gpio";
++			};
++			pmx_led_hdd1_green: pmx-led-hdd1-green {
++				marvell,pins = "mpp16";
++				marvell,function = "gpio";
++			};
++			pmx_led_hdd1_red: pmx-led-hdd1-red {
++				marvell,pins = "mpp13";
++				marvell,function = "gpio";
++			};
++			pmx_pwr_sata1: pmx-pwr-sata1 {
++				marvell,pins = "mpp33";
++				marvell,function = "gpio";
++			};
++		};
++
++		serial@12000 {
++			status = "okay";
++		};
++
++		sata@80000 {
++			status = "okay";
++			nr-ports = <2>;
++		};
++
++		rtc@10300 {
++			status = "disabled";
++		};
++
++		i2c@11000 {
++			status = "okay";
++			ht1382: rtc@68 {
++				compatible = "htk,ht1382";
++				reg = <0x68>;
++			};
++		};
++	};
++
++	regulators {
++		compatible = "simple-bus";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
++
++		usb0_power: regulator@1 {
++			compatible = "regulator-fixed";
++			reg = <1>;
++			regulator-name = "USB Power";
++			regulator-min-microvolt = <5000000>;
++			regulator-max-microvolt = <5000000>;
++			regulator-always-on;
++			regulator-boot-on;
++			enable-active-high;
++			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
++		};
++
++		sata1_power: regulator@2 {
++			compatible = "regulator-fixed";
++			reg = <2>;
++			regulator-name = "SATA1 Power";
++			regulator-min-microvolt = <5000000>;
++			regulator-max-microvolt = <5000000>;
++			regulator-always-on;
++			regulator-boot-on;
++			enable-active-high;
++			gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
++		};
++	};
++
++
++	gpio_keys {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
++		pinctrl-names = "default";
++
++		button@1 {
++			label = "Power Button";
++			linux,code = <KEY_POWER>;
++			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
++		};
++		button@2 {
++			label = "Copy Button";
++			linux,code = <KEY_COPY>;
++			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
++		};
++		button@3 {
++			label = "Reset Button";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
++				&pmx_led_usb_green
++				&pmx_led_sys_green &pmx_led_sys_orange
++				&pmx_led_copy_green &pmx_led_copy_red
++				&pmx_led_hdd1_green &pmx_led_hdd1_red>;
++		pinctrl-names = "default";
++
++		green-sys {
++			label = "nsa310s:green:sys";
++			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "timer";
++		};
++		orange-sys {
++			label = "nsa310s:orange:sys";
++			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
++		};
++		green-hdd1 {
++			label = "nsa310s:green:hdd1";
++			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
++		};
++		red-hdd1 {
++			label = "nsa310s:red:hdd1";
++			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
++		};
++		green-hdd2 {
++			label = "nsa310s:green:hdd2";
++			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
++		};
++		red-hdd2 {
++			label = "nsa310s:red:hdd2";
++			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
++		};
++		green-usb {
++			label = "nsa310s:green:usb";
++			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
++		};
++		green-copy {
++			label = "nsa310s:green:copy";
++			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "ide-disk";
++		};
++		red-copy {
++			label = "nsa310s:red:copy";
++			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
++		};
++	};
++
++	gpio_poweroff {
++		compatible = "gpio-poweroff";
++		pinctrl-0 = <&pmx_pwr_off>;
++		pinctrl-names = "default";
++		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
++	};
++};
++
++&nand {
++	status = "okay";
++	chip-delay = <35>;
++
++	partition@0 {
++		label = "u-boot";
++		reg = <0x0000000 0xe0000>;
++	};
++
++	partition@e0000 {
++		label = "u-boot environment";
++		reg = <0xe0000 0x100000>;
++	};
++
++	partition@100000 {
++		label = "second stage u-boot";
++		reg = <0x100000 0x200000>;
++	};
++
++	partition@200000 {
++		label = "root";
++		reg = <0x200000 0xfe00000>;
++	};
++};
++
++&mdio {
++	status = "okay";
++	ethphy0: ethernet-phy@1 {
++		compatible = "marvell,88e1318s";
++		reg = <1>;
++		marvell,reg-init = <0x1 0x16 0x0 0x3>,
++							<0x1 0x10 0x0 0x1017>,
++							<0x1 0x11 0x0 0x4408>,
++							<0x1 0x16 0x0 0x0>,
++							<0x1 0x4 0x0 0x1e1>,
++							<0x1 0x9 0x0 0x300>,
++							<0x1 0x10 0x0 0x3860>,
++							<0x1 0x0 0x0 0x9140>;
++	};
++};
++
++&eth0 {
++	status = "okay";
++
++	ethernet0-port@0 {
++		phy-handle = <&ethphy0>;
++	};
++};
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -145,6 +145,7 @@
+ 	kirkwood-ns2mini.dtb \
+ 	kirkwood-nsa310.dtb \
+ 	kirkwood-nsa310a.dtb \
++	kirkwood-nsa310s.dtb \
+ 	kirkwood-openblocks_a6.dtb \
+ 	kirkwood-openblocks_a7.dtb \
+ 	kirkwood-openrd-base.dtb \
diff --git a/target/linux/kirkwood/profiles/110-nas.mk b/target/linux/kirkwood/profiles/110-nas.mk
index 748efacd56..bf97437871 100644
--- a/target/linux/kirkwood/profiles/110-nas.mk
+++ b/target/linux/kirkwood/profiles/110-nas.mk
@@ -100,6 +100,22 @@ IOMEGA_IX2_200_UBI_OPTS:="-m 512 -p 16384 -s 256"
 
 $(eval $(call Profile,IOMEGA_IX2_200))
 
+define Profile/NSA310S
+  NAME:=ZyXEL NSA310S
+  PACKAGES:= \
+	kmod-ata-core kmod-ata-marvell-sata \
+	kmod-rtc-marvell kmod-usb2 kmod-usb-storage
+endef
+
+define Profile/NSA310S/Description
+ Package set compatible with ZyXEL NSA310S board.
+endef
+
+NSA310S_UBIFS_OPTS:="-m 2048 -e 126KiB -c 4096"
+NSA310S_UBI_OPTS:="-m 2048 -p 128KiB -s 512"
+
+$(eval $(call Profile,NSA310S))
+
 define Profile/POGOE02
   NAME:=Cloud Engines Pogoplug E02
   PACKAGES:= \