aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/kirkwood
diff options
context:
space:
mode:
authorLuka Perkov <luka@openwrt.org>2016-03-14 17:06:20 +0000
committerLuka Perkov <luka@openwrt.org>2016-03-14 17:06:20 +0000
commit0baab1dc75e6b18db6b2a7531549992efe972c80 (patch)
treea189495ece6a99f47a3e0bb462723cf846ddefab /target/linux/kirkwood
parentfd3d2ef816aeacfa17014ccec285ece8b1bb4e38 (diff)
downloadmaster-187ad058-0baab1dc75e6b18db6b2a7531549992efe972c80.tar.gz
master-187ad058-0baab1dc75e6b18db6b2a7531549992efe972c80.tar.bz2
master-187ad058-0baab1dc75e6b18db6b2a7531549992efe972c80.zip
kirkwood: add 4.4 support
Dropped patches because they applied upstream: - 120-iomega_ix2_200.patch - 150-pogoplug_e02.patch Tested on dockstar and goflexnet. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49019 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/kirkwood')
-rw-r--r--target/linux/kirkwood/config-4.4313
-rw-r--r--target/linux/kirkwood/patches-4.4/100-find_active_root.patch61
-rw-r--r--target/linux/kirkwood/patches-4.4/110-ib62x0.patch20
-rw-r--r--target/linux/kirkwood/patches-4.4/130-iconnect.patch41
-rw-r--r--target/linux/kirkwood/patches-4.4/140-dockstar.patch32
-rw-r--r--target/linux/kirkwood/patches-4.4/160-ea4500.patch200
-rw-r--r--target/linux/kirkwood/patches-4.4/170-ea3500.patch192
-rw-r--r--target/linux/kirkwood/patches-4.4/180-goflexhome.patch130
-rw-r--r--target/linux/kirkwood/patches-4.4/181-goflexnet.patch25
-rw-r--r--target/linux/kirkwood/patches-4.4/190-nsa310s.patch300
-rw-r--r--target/linux/kirkwood/patches-4.4/200-disable-tso.patch35
11 files changed, 1349 insertions, 0 deletions
diff --git a/target/linux/kirkwood/config-4.4 b/target/linux/kirkwood/config-4.4
new file mode 100644
index 0000000000..666bc04a4f
--- /dev/null
+++ b/target/linux/kirkwood/config-4.4
@@ -0,0 +1,313 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_CPU_AUTO=y
+# CONFIG_ARCH_MULTI_V4 is not set
+# CONFIG_ARCH_MULTI_V4T is not set
+CONFIG_ARCH_MULTI_V4_V5=y
+CONFIG_ARCH_MULTI_V5=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARM=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_HAS_SG_CHAIN=y
+# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_ATAGS=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLKSRC_PROBE=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FEROCEON=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CRC16=y
+# CONFIG_CRC32_SARWATE is not set
+CONFIG_CRC32_SLICEBY8=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+CONFIG_DEBUG_MVEBU_UART0=y
+# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set
+# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
+CONFIG_DEBUG_UART_8250=y
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
+CONFIG_DEBUG_UART_8250_SHIFT=2
+# CONFIG_DEBUG_UART_8250_WORD is not set
+CONFIG_DEBUG_UART_PHYS=0xf1012000
+CONFIG_DEBUG_UART_VIRT=0xfed12000
+CONFIG_DEBUG_UNCOMPRESS=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DLCI is not set
+CONFIG_DNOTIFY=y
+CONFIG_DTC=y
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EXT4_FS=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FRAME_POINTER=y
+CONFIG_FS_MBCACHE=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_MVEBU=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IOMMU_HELPER=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+CONFIG_KIRKWOOD_CLK=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_NETXBIG=y
+CONFIG_LEDS_NS2=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_LIBFDT=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MACH_KIRKWOOD=y
+CONFIG_MACH_MVEBU_ANY=y
+CONFIG_MANGLE_BOOTARGS=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_MVSDIO=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ORION=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_MV643XX_ETH=y
+CONFIG_MVEBU_CLK_COMMON=y
+CONFIG_MVEBU_MBUS=y
+CONFIG_MVMDIO=y
+# CONFIG_MVNETA is not set
+CONFIG_MVSW61XX_PHY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_KUSER_HELPERS=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NLS=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_ORION_IRQCHIP=y
+CONFIG_ORION_TIMER=y
+CONFIG_OUTER_CACHE=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+# CONFIG_PCI_DOMAINS_GENERIC is not set
+CONFIG_PCI_MVEBU=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHY_MVEBU_SATA=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_KIRKWOOD=y
+CONFIG_PINCTRL_MVEBU=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PLAT_ORION=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+# CONFIG_POWER_RESET_QNAP is not set
+CONFIG_POWER_SUPPLY=y
+CONFIG_RATIONAL=y
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_REGMAP=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DRV_MV is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCHED_INFO is not set
+CONFIG_SCSI=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SOC_BUS=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_ORION=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+CONFIG_SRCU=y
+CONFIG_SWCONFIG=y
+CONFIG_SWIOTLB=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+# CONFIG_UBIFS_FS_XZ is not set
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_ORION=y
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+CONFIG_USB_EHCI_PCI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_VFP is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WAN=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/kirkwood/patches-4.4/100-find_active_root.patch b/target/linux/kirkwood/patches-4.4/100-find_active_root.patch
new file mode 100644
index 0000000000..b39afedaa2
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.4/100-find_active_root.patch
@@ -0,0 +1,61 @@
+The WRT1900AC among other Linksys routers uses a dual-firmware layout.
+Dynamically rename the active partition to "ubi".
+
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+
+--- a/drivers/mtd/ofpart.c
++++ b/drivers/mtd/ofpart.c
+@@ -25,12 +25,15 @@ static bool node_has_compatible(struct d
+ return of_get_property(pp, "compatible", NULL);
+ }
+
++static int mangled_rootblock;
++
+ static int parse_ofpart_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+ {
+ struct device_node *mtd_node;
+ struct device_node *ofpart_node;
++ const char *owrtpart = "ubi";
+ const char *partname;
+ struct device_node *pp;
+ int nr_parts, i, ret = 0;
+@@ -110,9 +113,15 @@ static int parse_ofpart_partitions(struc
+ (*pparts)[i].offset = of_read_number(reg, a_cells);
+ (*pparts)[i].size = of_read_number(reg + a_cells, s_cells);
+
+- partname = of_get_property(pp, "label", &len);
+- if (!partname)
+- partname = of_get_property(pp, "name", &len);
++ if (mangled_rootblock && (i == mangled_rootblock)) {
++ partname = owrtpart;
++ } else {
++ partname = of_get_property(pp, "label", &len);
++
++ if (!partname)
++ partname = of_get_property(pp, "name", &len);
++ }
++
+ (*pparts)[i].name = partname;
+
+ if (of_get_property(pp, "read-only", &len))
+@@ -215,6 +224,18 @@ static int __init ofpart_parser_init(voi
+ return 0;
+ }
+
++static int __init active_root(char *str)
++{
++ get_option(&str, &mangled_rootblock);
++
++ if (!mangled_rootblock)
++ return 1;
++
++ return 1;
++}
++
++__setup("mangled_rootblock=", active_root);
++
+ static void __exit ofpart_parser_exit(void)
+ {
+ deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/kirkwood/patches-4.4/110-ib62x0.patch b/target/linux/kirkwood/patches-4.4/110-ib62x0.patch
new file mode 100644
index 0000000000..153c41b782
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.4/110-ib62x0.patch
@@ -0,0 +1,20 @@
+--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
++++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
+@@ -117,13 +117,13 @@
+ };
+
+ partition@100000 {
+- label = "uImage";
+- reg = <0x0100000 0x600000>;
++ label = "second stage u-boot";
++ reg = <0x100000 0x200000>;
+ };
+
+- partition@700000 {
++ partition@200000 {
+ label = "root";
+- reg = <0x0700000 0xf900000>;
++ reg = <0x200000 0xfe00000>;
+ };
+
+ };
diff --git a/target/linux/kirkwood/patches-4.4/130-iconnect.patch b/target/linux/kirkwood/patches-4.4/130-iconnect.patch
new file mode 100644
index 0000000000..c95579d793
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.4/130-iconnect.patch
@@ -0,0 +1,41 @@
+--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
++++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
+@@ -155,28 +155,23 @@
+ status = "okay";
+
+ partition@0 {
+- label = "uboot";
+- reg = <0x0000000 0xc0000>;
++ label = "u-boot";
++ reg = <0x0000000 0xe0000>;
+ };
+
+- partition@a0000 {
+- label = "env";
+- reg = <0xa0000 0x20000>;
++ partition@e0000 {
++ label = "u-boot environment";
++ reg = <0xe0000 0x100000>;
+ };
+
+ partition@100000 {
+- label = "zImage";
+- reg = <0x100000 0x300000>;
++ label = "second stage u-boot";
++ reg = <0x100000 0x200000>;
+ };
+
+- partition@540000 {
+- label = "initrd";
+- reg = <0x540000 0x300000>;
+- };
+-
+- partition@980000 {
+- label = "boot";
+- reg = <0x980000 0x1f400000>;
++ partition@200000 {
++ label = "root";
++ reg = <0x200000 0x1fe00000>;
+ };
+ };
+
diff --git a/target/linux/kirkwood/patches-4.4/140-dockstar.patch b/target/linux/kirkwood/patches-4.4/140-dockstar.patch
new file mode 100644
index 0000000000..f66e19d27f
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.4/140-dockstar.patch
@@ -0,0 +1,32 @@
+--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
++++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
+@@ -77,18 +77,22 @@
+
+ partition@0 {
+ label = "u-boot";
+- reg = <0x0000000 0x100000>;
+- read-only;
++ reg = <0x0000000 0xe0000>;
++ };
++
++ partition@e0000 {
++ label = "u-boot environment";
++ reg = <0xe0000 0x100000>;
+ };
+
+ partition@100000 {
+- label = "uImage";
+- reg = <0x0100000 0x400000>;
++ label = "second stage u-boot";
++ reg = <0x100000 0x200000>;
+ };
+
+- partition@500000 {
+- label = "data";
+- reg = <0x0500000 0xfb00000>;
++ partition@200000 {
++ label = "ubi";
++ reg = <0x200000 0xfe00000>;
+ };
+ };
+
diff --git a/target/linux/kirkwood/patches-4.4/160-ea4500.patch b/target/linux/kirkwood/patches-4.4/160-ea4500.patch
new file mode 100644
index 0000000000..baf6e01bae
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.4/160-ea4500.patch
@@ -0,0 +1,200 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -183,6 +183,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-is2.dtb \
+ kirkwood-km_kirkwood.dtb \
+ kirkwood-laplug.dtb \
++ kirkwood-linksys-viper.dtb \
+ kirkwood-lschlv2.dtb \
+ kirkwood-lswvl.dtb \
+ kirkwood-lswxl.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+@@ -0,0 +1,187 @@
++/*
++ * kirkwood-linksys-viper.dts - Device Tree file for Linksys E4200v2/EA4500
++ *
++ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
++ * (c) 2013 Deutsche Telekom Innovation Laboratories
++ * (c) 2014 Luka Perkov <luka@openwrt.org>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6282.dtsi"
++
++/ {
++ model = "Linksys E4200v2 / EA4500";
++ compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
++
++ memory {
++ device_type = "memory";
++ reg = <0x00000000 0x8000000>;
++ };
++
++ chosen {
++ bootargs = "console=ttyS0,115200n8 earlyprintk";
++ };
++
++ mbus {
++ pcie-controller {
++ status = "okay";
++
++ pcie@1,0 {
++ status = "okay";
++ };
++
++ pcie@2,0 {
++ status = "okay";
++ };
++ };
++ };
++
++ ocp@f1000000 {
++ pinctrl: pin-controller@10000 {
++ pmx_led_white_health: pmx-led-white-health {
++ marvell,pins = "mpp7";
++ marvell,function = "gpo";
++ };
++ pmx_led_white_pulse: pmx-led-white-pulse {
++ marvell,pins = "mpp14";
++ marvell,function = "gpio";
++ };
++ pmx_btn_wps: pmx-btn-wps {
++ marvell,pins = "mpp47";
++ marvell,function = "gpio";
++ };
++ pmx_btn_reset: pmx-btn-reset {
++ marvell,pins = "mpp48";
++ marvell,function = "gpio";
++ };
++ };
++
++ rtc@10300 {
++ status = "disabled";
++ };
++
++ serial@12000 {
++ status = "okay";
++ };
++
++ };
++
++ gpio_keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
++ pinctrl-names = "default";
++
++ button@15 {
++ label = "WPS Button";
++ linux,code = <KEY_WPS_BUTTON>;
++ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
++ };
++
++ button@16 {
++ label = "Reset Button";
++ linux,code = <KEY_RESTART>;
++ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ gpio-leds {
++ compatible = "gpio-leds";
++ pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
++ pinctrl-names = "default";
++
++ white-health {
++ label = "viper:white:health";
++ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
++ };
++
++ white-pulse {
++ label = "viper:white:pulse";
++ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ mvsw61xx {
++ compatible = "marvell,88e6171";
++ status = "okay";
++ reg = <0x10>;
++
++ mii-bus = <&mdio>;
++ cpu-port-0 = <5>;
++ cpu-port-1 = <6>;
++ is-indirect;
++ };
++};
++
++&nand {
++ status = "okay";
++ pinctrl-0 = <&pmx_nand>;
++ pinctrl-names = "default";
++
++ partition@0 {
++ label = "u-boot";
++ reg = <0x0 0x80000>;
++ };
++
++ partition@80000 {
++ label = "u_env";
++ reg = <0x80000 0x20000>;
++ };
++
++ partition@a0000 {
++ label = "s_env";
++ reg = <0xa0000 0x20000>;
++ };
++
++ partition@200000 {
++ label = "kernel1";
++ reg = <0x200000 0x1a00000>;
++ };
++
++ partition@4a0000 {
++ label = "rootfs1";
++ reg = <0x4a0000 0x1760000>;
++ };
++
++ partition@1c00000 {
++ label = "kernel2";
++ reg = <0x1c00000 0x1a00000>;
++ };
++
++ partition@1ea0000 {
++ label = "rootfs2";
++ reg = <0x1ea0000 0x1760000>;
++ };
++
++ partition@3600000 {
++ label = "syscfg";
++ reg = <0x3600000 0x4a00000>;
++ };
++};
++
++&mdio {
++ status = "okay";
++};
++
++&eth0 {
++ status = "okay";
++ ethernet0-port@0 {
++ speed = <1000>;
++ duplex = <1>;
++ };
++};
++
++&eth1 {
++ status = "okay";
++ ethernet1-port@0 {
++ speed = <1000>;
++ duplex = <1>;
++ };
++};
diff --git a/target/linux/kirkwood/patches-4.4/170-ea3500.patch b/target/linux/kirkwood/patches-4.4/170-ea3500.patch
new file mode 100644
index 0000000000..bc7ce347f5
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.4/170-ea3500.patch
@@ -0,0 +1,192 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -183,6 +183,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-is2.dtb \
+ kirkwood-km_kirkwood.dtb \
+ kirkwood-laplug.dtb \
++ kirkwood-linksys-audi.dtb \
+ kirkwood-linksys-viper.dtb \
+ kirkwood-lschlv2.dtb \
+ kirkwood-lswvl.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
+@@ -0,0 +1,179 @@
++/*
++ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
++ *
++ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
++ * (c) 2013 Deutsche Telekom Innovation Laboratories
++ * (c) 2014 Luka Perkov <luka@openwrt.org>
++ * (c) 2014 Dan Walters <dan@walters.io>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6282.dtsi"
++
++/ {
++ model = "Linksys EA3500";
++ compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
++
++ memory {
++ device_type = "memory";
++ reg = <0x00000000 0x4000000>;
++ };
++
++ chosen {
++ bootargs = "console=ttyS0,115200n8 earlyprintk";
++ };
++
++ mbus {
++ pcie-controller {
++ status = "okay";
++
++ pcie@1,0 {
++ status = "okay";
++ };
++
++ pcie@2,0 {
++ status = "okay";
++ };
++ };
++ };
++
++ ocp@f1000000 {
++ pinctrl: pin-controller@10000 {
++ pmx_led_green_power: pmx-led-green-power {
++ marvell,pins = "mpp7";
++ marvell,function = "gpo";
++ };
++ pmx_btn_wps: pmx-btn-wps {
++ marvell,pins = "mpp47";
++ marvell,function = "gpio";
++ };
++ pmx_btn_reset: pmx-btn-reset {
++ marvell,pins = "mpp48";
++ marvell,function = "gpio";
++ };
++ };
++
++ rtc@10300 {
++ status = "disabled";
++ };
++
++ serial@12000 {
++ status = "okay";
++ };
++
++ };
++
++ gpio_keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
++ pinctrl-names = "default";
++
++ button@15 {
++ label = "WPS Button";
++ linux,code = <KEY_WPS_BUTTON>;
++ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
++ };
++
++ button@16 {
++ label = "Reset Button";
++ linux,code = <KEY_RESTART>;
++ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ gpio-leds {
++ compatible = "gpio-leds";
++ pinctrl-0 = < &pmx_led_green_power >;
++ pinctrl-names = "default";
++
++ green-power {
++ label = "audi:green:power";
++ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ mvsw61xx {
++ compatible = "marvell,88e6171";
++ status = "okay";
++ reg = <0x10>;
++
++ mii-bus = <&mdio>;
++ cpu-port-0 = <5>;
++ cpu-port-1 = <6>;
++ is-indirect;
++ };
++};
++
++&nand {
++ status = "okay";
++ pinctrl-0 = <&pmx_nand>;
++ pinctrl-names = "default";
++
++ partition@0 {
++ label = "u-boot";
++ reg = <0x0 0x80000>;
++ };
++
++ partition@80000 {
++ label = "u_env";
++ reg = <0x80000 0x4000>;
++ };
++
++ partition@84000 {
++ label = "s_env";
++ reg = <0x84000 0x4000>;
++ };
++
++ partition@200000 {
++ label = "kernel1";
++ reg = <0x200000 0x1400000>;
++ };
++
++ partition@490000 {
++ label = "rootfs1";
++ reg = <0x490000 0x1170000>;
++ };
++
++ partition@1600000 {
++ label = "kernel2";
++ reg = <0x1600000 0x1400000>;
++ };
++
++ partition@1890000 {
++ label = "rootfs2";
++ reg = <0x1890000 0x1170000>;
++ };
++
++ partition@2a00000 {
++ label = "syscfg";
++ reg = <0x2a00000 0x1600000>;
++ };
++};
++
++&mdio {
++ status = "okay";
++};
++
++&eth0 {
++ status = "okay";
++ ethernet0-port@0 {
++ speed = <1000>;
++ duplex = <1>;
++ };
++};
++
++&eth1 {
++ status = "okay";
++ ethernet1-port@0 {
++ speed = <1000>;
++ duplex = <1>;
++ };
++};
diff --git a/target/linux/kirkwood/patches-4.4/180-goflexhome.patch b/target/linux/kirkwood/patches-4.4/180-goflexhome.patch
new file mode 100644
index 0000000000..6a8d3502e7
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.4/180-goflexhome.patch
@@ -0,0 +1,130 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -175,6 +175,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-ds411.dtb \
+ kirkwood-ds411j.dtb \
+ kirkwood-ds411slim.dtb \
++ kirkwood-goflexhome.dtb \
+ kirkwood-goflexnet.dtb \
+ kirkwood-guruplug-server-plus.dtb \
+ kirkwood-ib62x0.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts
+@@ -0,0 +1,117 @@
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6281.dtsi"
++
++/ {
++ model = "Seagate GoFlex Home";
++ compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++ memory {
++ device_type = "memory";
++ reg = <0x00000000 0x8000000>;
++ };
++
++ chosen {
++ bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
++ stdout-path = &uart0;
++ };
++
++ ocp@f1000000 {
++ pinctrl: pin-controller@10000 {
++ pmx_usb_power_enable: pmx-usb-power-enable {
++ marvell,pins = "mpp29";
++ marvell,function = "gpio";
++ };
++ pmx_led_white: pmx-led-white {
++ marvell,pins = "mpp40";
++ marvell,function = "gpio";
++ };
++ pmx_led_green: pmx-led_green {
++ marvell,pins = "mpp46";
++ marvell,function = "gpio";
++ };
++ pmx_led_orange: pmx-led-orange {
++ marvell,pins = "mpp47";
++ marvell,function = "gpio";
++ };
++ };
++ serial@12000 {
++ status = "ok";
++ };
++
++ sata@80000 {
++ status = "okay";
++ nr-ports = <2>;
++ };
++
++ };
++ gpio-leds {
++ compatible = "gpio-leds";
++
++ health {
++ label = "status:green:health";
++ gpios = <&gpio1 14 1>;
++ linux,default-trigger = "default-on";
++ };
++ fault {
++ label = "status:orange:fault";
++ gpios = <&gpio1 15 1>;
++ };
++ misc {
++ label = "status:white:misc";
++ gpios = <&gpio1 8 1>;
++ linux,default-trigger = "ide-disk";
++ };
++ };
++ regulators {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ pinctrl-0 = <&pmx_usb_power_enable>;
++ pinctrl-names = "default";
++
++ usb_power: regulator@1 {
++ compatible = "regulator-fixed";
++ reg = <1>;
++ regulator-name = "USB Power";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ enable-active-high;
++ regulator-always-on;
++ regulator-boot-on;
++ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
++ };
++ };
++};
++
++&nand {
++ chip-delay = <40>;
++ status = "okay";
++
++ partition@0 {
++ label = "u-boot";
++ reg = <0x0000000 0x100000>;
++ read-only;
++ };
++
++ partition@100000 {
++ label = "ubi";
++ reg = <0x100000 0x0ff00000>;
++ };
++};
++
++&mdio {
++ status = "okay";
++
++ ethphy0: ethernet-phy@0 {
++ reg = <0>;
++ };
++};
++
++&eth0 {
++ status = "okay";
++ ethernet0-port@0 {
++ phy-handle = <&ethphy0>;
++ };
++};
diff --git a/target/linux/kirkwood/patches-4.4/181-goflexnet.patch b/target/linux/kirkwood/patches-4.4/181-goflexnet.patch
new file mode 100644
index 0000000000..fc19e396d5
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.4/181-goflexnet.patch
@@ -0,0 +1,25 @@
+Index: linux-4.4.4/arch/arm/boot/dts/kirkwood-goflexnet.dts
+===================================================================
+--- linux-4.4.4.orig/arch/arm/boot/dts/kirkwood-goflexnet.dts
++++ linux-4.4.4/arch/arm/boot/dts/kirkwood-goflexnet.dts
+@@ -158,18 +158,8 @@
+ };
+
+ partition@100000 {
+- label = "uImage";
+- reg = <0x0100000 0x400000>;
+- };
+-
+- partition@500000 {
+- label = "pogoplug";
+- reg = <0x0500000 0x2000000>;
+- };
+-
+- partition@2500000 {
+- label = "root";
+- reg = <0x02500000 0xd800000>;
++ label = "ubi";
++ reg = <0x0100000 0x0ff00000>;
+ };
+ };
+
diff --git a/target/linux/kirkwood/patches-4.4/190-nsa310s.patch b/target/linux/kirkwood/patches-4.4/190-nsa310s.patch
new file mode 100644
index 0000000000..54c0e81510
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.4/190-nsa310s.patch
@@ -0,0 +1,300 @@
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
+@@ -0,0 +1,287 @@
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6281.dtsi"
++
++/ {
++ model = "ZyXEL NSA310S";
++ compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
++
++ memory {
++ device_type = "memory";
++ reg = <0x00000000 0x10000000>;
++ };
++
++ chosen {
++ bootargs = "console=ttyS0,115200n8 earlyprintk";
++ stdout-path = &uart0;
++ };
++
++ mbus {
++ pcie-controller {
++ status = "okay";
++
++ pcie@1,0 {
++ status = "okay";
++ };
++ };
++ };
++
++ ocp@f1000000 {
++ pinctrl: pin-controller@10000 {
++ pinctrl-names = "default";
++
++ pmx_sata0: pmx-sata0 {
++ marvell,pins;
++ marvell,function = "sata0";
++ };
++ pmx_sata1: pmx-sata1 {
++ marvell,pins;
++ marvell,function = "sata1";
++ };
++ pmx_usb_power: pmx-usb-power {
++ marvell,pins = "mpp21";
++ marvell,function = "gpio";
++ };
++ pmx_pwr_off: pmx-pwr-off {
++ marvell,pins = "mpp27";
++ marvell,function = "gpio";
++ };
++ pmx_btn_reset: pmx-btn-reset {
++ marvell,pins = "mpp24";
++ marvell,function = "gpio";
++ };
++ pmx_btn_copy: pmx-btn-copy {
++ marvell,pins = "mpp25";
++ marvell,function = "gpio";
++ };
++ pmx_btn_power: pmx-btn-power {
++ marvell,pins = "mpp26";
++ marvell,function = "gpio";
++ };
++ pmx_led_hdd2_green: pmx-led-hdd2-green {
++ marvell,pins = "mpp34";
++ marvell,function = "gpio";
++ };
++ pmx_led_hdd2_red: pmx-led-hdd2-red {
++ marvell,pins = "mpp12";
++ marvell,function = "gpio";
++ };
++ pmx_led_usb_green: pmx-led-usb-green {
++ marvell,pins = "mpp15";
++ marvell,function = "gpio";
++ };
++ pmx_led_copy_green: pmx-led-copy-green {
++ marvell,pins = "mpp22";
++ marvell,function = "gpio";
++ };
++ pmx_led_copy_red: pmx-led-copy-red {
++ marvell,pins = "mpp23";
++ marvell,function = "gpio";
++ };
++ pmx_led_sys_green: pmx-led-sys-green {
++ marvell,pins = "mpp28";
++ marvell,function = "gpio";
++ };
++ pmx_led_sys_orange: pmx-led-sys-orange {
++ marvell,pins = "mpp29";
++ marvell,function = "gpio";
++ };
++ pmx_led_hdd1_green: pmx-led-hdd1-green {
++ marvell,pins = "mpp16";
++ marvell,function = "gpio";
++ };
++ pmx_led_hdd1_red: pmx-led-hdd1-red {
++ marvell,pins = "mpp13";
++ marvell,function = "gpio";
++ };
++ pmx_pwr_sata1: pmx-pwr-sata1 {
++ marvell,pins = "mpp33";
++ marvell,function = "gpio";
++ };
++ };
++
++ serial@12000 {
++ status = "okay";
++ };
++
++ sata@80000 {
++ status = "okay";
++ nr-ports = <2>;
++ };
++
++ rtc@10300 {
++ status = "disabled";
++ };
++
++ i2c@11000 {
++ status = "okay";
++ ht1382: rtc@68 {
++ compatible = "htk,ht1382";
++ reg = <0x68>;
++ };
++ };
++ };
++
++ regulators {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
++
++ usb0_power: regulator@1 {
++ compatible = "regulator-fixed";
++ reg = <1>;
++ regulator-name = "USB Power";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-always-on;
++ regulator-boot-on;
++ enable-active-high;
++ gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
++ };
++
++ sata1_power: regulator@2 {
++ compatible = "regulator-fixed";
++ reg = <2>;
++ regulator-name = "SATA1 Power";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-always-on;
++ regulator-boot-on;
++ enable-active-high;
++ gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++
++ gpio_keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
++ pinctrl-names = "default";
++
++ button@1 {
++ label = "Power Button";
++ linux,code = <KEY_POWER>;
++ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
++ };
++ button@2 {
++ label = "Copy Button";
++ linux,code = <KEY_COPY>;
++ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
++ };
++ button@3 {
++ label = "Reset Button";
++ linux,code = <KEY_RESTART>;
++ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ gpio-leds {
++ compatible = "gpio-leds";
++ pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
++ &pmx_led_usb_green
++ &pmx_led_sys_green &pmx_led_sys_orange
++ &pmx_led_copy_green &pmx_led_copy_red
++ &pmx_led_hdd1_green &pmx_led_hdd1_red>;
++ pinctrl-names = "default";
++
++ green-sys {
++ label = "nsa310s:green:sys";
++ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "timer";
++ };
++ orange-sys {
++ label = "nsa310s:orange:sys";
++ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
++ };
++ green-hdd1 {
++ label = "nsa310s:green:hdd1";
++ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
++ };
++ red-hdd1 {
++ label = "nsa310s:red:hdd1";
++ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
++ };
++ green-hdd2 {
++ label = "nsa310s:green:hdd2";
++ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
++ };
++ red-hdd2 {
++ label = "nsa310s:red:hdd2";
++ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
++ };
++ green-usb {
++ label = "nsa310s:green:usb";
++ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
++ };
++ green-copy {
++ label = "nsa310s:green:copy";
++ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "ide-disk";
++ };
++ red-copy {
++ label = "nsa310s:red:copy";
++ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ gpio_poweroff {
++ compatible = "gpio-poweroff";
++ pinctrl-0 = <&pmx_pwr_off>;
++ pinctrl-names = "default";
++ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
++ };
++};
++
++&nand {
++ status = "okay";
++ chip-delay = <35>;
++
++ partition@0 {
++ label = "u-boot";
++ reg = <0x0000000 0xe0000>;
++ };
++
++ partition@e0000 {
++ label = "u-boot environment";
++ reg = <0xe0000 0x100000>;
++ };
++
++ partition@100000 {
++ label = "second stage u-boot";
++ reg = <0x100000 0x200000>;
++ };
++
++ partition@200000 {
++ label = "root";
++ reg = <0x200000 0x7e00000>;
++ };
++};
++
++&mdio {
++ status = "okay";
++ ethphy0: ethernet-phy@1 {
++ compatible = "marvell,88e1318s";
++ reg = <1>;
++ marvell,reg-init = <0x1 0x16 0x0 0x3>,
++ <0x1 0x10 0x0 0x1017>,
++ <0x1 0x11 0x0 0x4408>,
++ <0x1 0x16 0x0 0x0>,
++ <0x1 0x4 0x0 0x1e1>,
++ <0x1 0x9 0x0 0x300>,
++ <0x1 0x10 0x0 0x3860>,
++ <0x1 0x0 0x0 0x9140>;
++ };
++};
++
++&eth0 {
++ status = "okay";
++
++ ethernet0-port@0 {
++ phy-handle = <&ethphy0>;
++ };
++};
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -203,6 +203,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-ns2mini.dtb \
+ kirkwood-nsa310.dtb \
+ kirkwood-nsa310a.dtb \
++ kirkwood-nsa310s.dtb \
+ kirkwood-openblocks_a6.dtb \
+ kirkwood-openblocks_a7.dtb \
+ kirkwood-openrd-base.dtb \
diff --git a/target/linux/kirkwood/patches-4.4/200-disable-tso.patch b/target/linux/kirkwood/patches-4.4/200-disable-tso.patch
new file mode 100644
index 0000000000..af6ec20c57
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.4/200-disable-tso.patch
@@ -0,0 +1,35 @@
+From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Subject: [PATCH] net: mv643xx_eth: Make TSO disabled by default
+
+Data corruption has been observed to be produced by TSO. For instance,
+accessing files on a NFS-server with TSO enabled results in different data
+transferred each time.
+
+This has been observed only on Kirkwood platforms, i.e. with the mv643xx_eth
+driver. Same tests on platforms using the mvneta ethernet driver have
+passed without errors.
+
+Make TSO disabled by default for now, until we can found a proper fix
+for the regression.
+
+Fixes: 3ae8f4e0b98 ('net: mv643xx_eth: Implement software TSO')
+Reported-by: Slawomir Gajzner <slawomir.gajzner <at> gmail.com>
+Reported-by: Julien D'Ascenzio <jdascenzio <at> yahoo.fr>
+Signed-off-by: Ezequiel Garcia <ezequiel.garcia <at> free-electrons.com>
+---
+--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
++++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
+@@ -3178,11 +3178,11 @@ static int mv643xx_eth_probe(struct plat
+ dev->watchdog_timeo = 2 * HZ;
+ dev->base_addr = 0;
+
+- dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
++ dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
+ dev->vlan_features = dev->features;
+
+ dev->features |= NETIF_F_RXCSUM;
+- dev->hw_features = dev->features;
++ dev->hw_features = dev->features | NETIF_F_TSO;
+
+ dev->priv_flags |= IFF_UNICAST_FLT;
+ dev->gso_max_segs = MV643XX_MAX_TSO_SEGS;