ixp4xx: revert kernel support for 2.6.33 & 2.6.35

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21890 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 71 deletions

diff --git a/target/linux/ixp4xx/patches-2.6.33/132-wrt300nv2_mac_fix.patch b/target/linux/ixp4xx/patches-2.6.33/132-wrt300nv2_mac_fix.patch
deleted file mode 100644
index cc891e2482..0000000000
--- a/target/linux/ixp4xx/patches-2.6.33/132-wrt300nv2_mac_fix.patch
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -3,6 +3,7 @@
-  *
-  * Board setup for the Linksys WRT300N v2
-  *
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
-  * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-  *
-  * based on coyote-setup.c:
-@@ -18,6 +19,7 @@
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#include <linux/etherdevice.h>
- 
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -79,7 +81,8 @@ static struct platform_device wrt300nv2_
- /* Built-in 10/100 Ethernet MAC interfaces */
- static struct eth_plat_info wrt300nv2_plat_eth[] = {
- 	{
--		.phy		= -1,
-+		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
-+		.phy_mask	= 0x0F0000,
- 		.rxq		= 3,
- 		.txreadyq	= 20,
- 	}, {
-@@ -111,6 +114,9 @@ static struct platform_device *wrt300nv2
- static void __init wrt300nv2_init(void)
- {
- 	ixp4xx_sys_init();
-+	uint8_t __iomem *f;
-+	int offset = 0;
-+	int i;
- 
- 	wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
- 	wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-@@ -119,6 +125,32 @@ static void __init wrt300nv2_init(void)
- 	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
- 
- 	platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
-+
-+	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x60000);
-+
-+	if (f) {
-+		for (i = 0; i < 6; i++) {
-+#ifdef __ARMEB__
-+			wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + i);
-+			if (i == 5)
-+				offset = 1;
-+			wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
-+#else
-+			wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + (i^3));
-+			if (i == 5)
-+				offset = 1;
-+			wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
-+#endif
-+		}
-+		iounmap(f);
-+	}
-+
-+	if (!(is_valid_ether_addr(wrt300nv2_plat_eth[0].hwaddr)))
-+		random_ether_addr(wrt300nv2_plat_eth[0].hwaddr);
-+	if (!(is_valid_ether_addr(wrt300nv2_plat_eth[1].hwaddr))) {
-+		memcpy(wrt300nv2_plat_eth[1].hwaddr, wrt300nv2_plat_eth[0].hwaddr, ETH_ALEN);
-+		wrt300nv2_plat_eth[1].hwaddr[5] = (wrt300nv2_plat_eth[0].hwaddr[5] + 1);
-+	}
- }
- 
- #ifdef CONFIG_MACH_WRT300NV2