get rid of per-profile base-files

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9069 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 files changed, 0 insertions, 268 deletions

diff --git a/target/linux/brcm-2.4/base-files/default/etc/diag.sh b/target/linux/brcm-2.4/base-files/default/etc/diag.sh
deleted file mode 100644
index 3b08554c64..0000000000
--- a/target/linux/brcm-2.4/base-files/default/etc/diag.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-set_led() {
-	local led="$1"
-	local state="$2"
-	[ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1"
-}
-
-set_state() {
-	case "$1" in
-		preinit)
-			set_led dmz 1
-			set_led diag 1
-			set_led power 0
-		;;
-		failsafe)
-			set_led diag f
-			set_led power f
-			set_led dmz f
-		;;
-		done)
-			set_led dmz 0
-			set_led diag 0
-			set_led power 1
-		;;
-	esac
-}
diff --git a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
deleted file mode 100755
index 643ba35d31..0000000000
--- a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
+++ /dev/null
@@ -1,154 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=05
-
-start() {
-	[ -e /etc/config/network ] && exit 0
-
-	mkdir -p /etc/config
-
-	(
-		if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
-			# WGT634u
-			echo boardtype=wgt634u
-		else
-			strings "$(find_mtd_part nvram)"
-		fi
-	) | awk '
-	function p(cfgname, name) {
-		if (c[name] != "") print "	option " cfgname "	\"" c[name] "\""
-	}
-
-	function macinc(mac, maca, i, result) {
-		split(mac, maca, ":")
-		for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
-		if (++maca[6] > 0xff) {
-			maca[5]++
-			maca[6] = 0
-		}
-		for (i = 1; i <= 6; i++) {
-			if (i != 1) result = result ":"
-			result = result sprintf("%02x", maca[i])
-		}
-		return result
-	}
-
-	BEGIN {
-		FS="="
-		c["lan_ifname"]="eth0.0"
-		c["wan_ifname"]="eth0.1"
-		c["vlan0ports"]="1 2 3 4 5*"
-		c["vlan1ports"]="0 5"
-		getline < "/proc/diag/model"
-		model=$0
-		for (i = 0; i < 6; i++) {
-			if (mac_check != "") mac_check = mac_check ":"
-			mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
-		}
-	}
-
-	($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
-		nvram[$1] = $2
-	}
-
-	END {
-		if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
-			c["wan_ifname"] = ""
-			c["lan_ifname"] = "eth1"
-		}
-		if (model == "ASUS WL-500g") {
-			c["wan_ifname"] = "eth1"
-			c["lan_ifname"] = "eth0"
-		}
-		if (model == "Dell TrueMobile 2300") {
-			c["vlan0ports"] = "0 1 2 3 5*"
-			c["vlan1ports"] = "4 5"
-		}
-		if (nvram["boardtype"] == "bcm94710r4") {
-			# Toshiba WRC-1000
-			c["lan_ifname"] = "eth0"
-			c["wan_ifname"] = "eth1"
-		}
-		if (nvram["boardtype"] == "wgt634u") {
-			c["vlan0ports"] = "0 1 2 3 5*"
-			c["vlan1ports"] = "4 5"
-		}
-		if (nvram["boardtype"] == "0x0467") {
-			c["vlan0ports"] = "0 1 2 3 5*"
-			c["vlan1ports"] = "4 5"
-		}
-		if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
-			if (nvram["boardnum"] == "45") {
-				# WL-500gP
-				c["vlan0ports"] = "1 2 3 4 5*"
-				c["vlan1ports"] = "0 5"
-			} else {
-				# Generic BCM94704
-				c["vlan0ports"] = "0 1 2 3 4 5u"
-				c["vlan1ports"] = ""
-				c["lan_ifname"] = "eth0"
-				c["wan_ifname"] = "eth1"
-
-				# MAC addresses on 4704 tend to be screwed up. Add a workaround here
-				if (nvram["et0macaddr"] ~ mac_check) {
-					c["lan_macaddr"] = nvram["et0macaddr"]
-					c["wan_macaddr"] = macinc(c["lan_macaddr"])
-				}
-			}
-		}
-
-		# WAP54G
-		if ((nvram["boardnum"] == "2") || \
-			(nvram["boardnum"] == "1024")) {
-			c["lan_ifname"]="eth0"
-			c["wan_ifname"]=""
-		}
-
-		# ASUS WL-700gE
-		# These are actually same as defaults above. For some reason this script applies
-		# Generic BCM94704 settings instead so we revert to proper settings here.
-		# Hopefully someone will fix this properly soon.
-		if (model == "ASUS WL-700gE") {
-			c["lan_ifname"]="eth0.0"
-			c["wan_ifname"]="eth0.1"
-			c["vlan0ports"]="1 2 3 4 5*"
-			c["vlan1ports"]="0 5"
-		}
-
-		if (model == "Motorola WR850G V2/V3") {
-			c["vlan0ports"]="0 1 2 3 5*"
-			c["vlan1ports"]="4 5"
-		}
-
-		print "#### VLAN configuration "
-		print "config switch eth0"
-		p("vlan0", "vlan0ports")
-		p("vlan1", "vlan1ports")
-		print ""
-		print ""
-		print "#### Loopback configuration"
-		print "config interface loopback"
-		print "	option ifname	\"lo\""
-		print "	option proto	static"
-		print "	option ipaddr	127.0.0.1"
-		print "	option netmask	255.0.0.0"
-		print ""
-		print ""
-		print "#### LAN configuration"
-		print "config interface lan"
-		print "	option type 	bridge"
-		p("ifname", "lan_ifname")
-		p("macaddr", "lan_macaddr")
-		print "	option proto	static"
-		print "	option ipaddr	192.168.1.1"
-		print "	option netmask	255.255.255.0"
-		print ""
-		print ""
-		print "#### WAN configuration"
-		print "config interface	wan"
-		p("ifname", "wan_ifname")
-		p("macaddr", "wan_macaddr")
-		print "	option proto	dhcp"
-	}' > /etc/config/network
-}
diff --git a/target/linux/brcm-2.4/base-files/default/etc/preinit.arch b/target/linux/brcm-2.4/base-files/default/etc/preinit.arch
deleted file mode 100755
index 43df591ab7..0000000000
--- a/target/linux/brcm-2.4/base-files/default/etc/preinit.arch
+++ /dev/null
@@ -1,58 +0,0 @@
-. /etc/functions.sh
-
-failsafe() {
-	lock /tmp/.failsafe
-	failsafe_ip
-
-	echo "0 1 2 3 4 5u*" > /proc/switch/eth0/vlan/0/ports
-	
-	set_state failsafe
-	[ -x "/usr/sbin/nvram" ] && {
-		[ "$(nvram get boot_wait)" != "on" ] && {
-			nvram set boot_wait=on
-			nvram commit
-		}
-	}
-
-	netmsg 192.168.1.255 "Entering Failsafe!"
-	telnetd -l /bin/login <> /dev/null 2>&1
-
-	ash --login
-}
-
-mount none /proc -t proc
-
-insmod diag
-set_state preinit
-echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug
-
-ifname=eth0
-
-# hardware specific overrides
-case "$(cat /proc/diag/model)" in
-	"Linksys WAP54G V1") ifname=eth1;;
-	"ASUS WL-HDD") ifname=eth1;;
-	"ASUS WL-300g") ifname=eth1;;
-	"ASUS (unknown, BCM4702)") ifname=eth1;;
-esac
-
-failsafe_ip
-
-insmod switch-core
-insmod switch-robo || insmod switch-adm || rmmod switch-core
-
-[ -d /proc/switch/eth0 ] && {
-	echo 1 > /proc/switch/eth0/reset
-
-	# this would be easier if we blasted the message across all ports
-	# but we don't want packets leaking across interfaces
-	for port in $(seq 0 4); do {
-		echo "$port 5u*" > /proc/switch/eth0/vlan/0/ports
-		netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"
-	}; done
-} || netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"
-
-ifconfig $ifname 0.0.0.0 down
-
-sleep 2
-
diff --git a/target/linux/brcm-2.4/base-files/default/lib/upgrade/platform.sh b/target/linux/brcm-2.4/base-files/default/lib/upgrade/platform.sh
deleted file mode 100644
index ac53b9d591..0000000000
--- a/target/linux/brcm-2.4/base-files/default/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,24 +0,0 @@
-platform_check_image() {
-	[ "$ARGC" -gt 1 ] && return 1
-
-	case "$(get_magic_word "$1")" in
-		# .trx files
-		4844) return 0;;
-		# .bin files
-		5735) return 0;;
-		*)
-			echo "Invalid image type"
-			return 1
-		;;
-	esac
-}
-
-platform_do_upgrade() {
-	get_image "$1" > $(find_mtd_part "linux")
-	sync
-}
-
-brcm_prepare_mtd() {
-	[ "$SAVE_CONFIG" -eq 1 ] && return 0
-}
-append sysupgrade_pre_upgrade brcm_prepare_mtd
diff --git a/target/linux/brcm-2.4/base-files/default/sbin/hotplug.failsafe b/target/linux/brcm-2.4/base-files/default/sbin/hotplug.failsafe
deleted file mode 100755
index 0544339de8..0000000000
--- a/target/linux/brcm-2.4/base-files/default/sbin/hotplug.failsafe
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-case "$1" in
-	button) kill -USR1 1;;
-esac