diff options
author | Florian Fainelli <florian@openwrt.org> | 2007-07-09 16:06:43 +0000 |
---|---|---|
committer | Florian Fainelli <florian@openwrt.org> | 2007-07-09 16:06:43 +0000 |
commit | 32457159eaed671aac495a816555905783f4e6f9 (patch) | |
tree | 2a87405479a660590b7803f57b26b27fca61849e /target/linux/au1000-2.6/patches | |
parent | ce860d9db9d11948422d7dc052127cd35b10f949 (diff) | |
download | master-187ad058-32457159eaed671aac495a816555905783f4e6f9.tar.gz master-187ad058-32457159eaed671aac495a816555905783f4e6f9.tar.bz2 master-187ad058-32457159eaed671aac495a816555905783f4e6f9.zip |
au1000 now runs .22, mtx-1 watchdog is mainline and i2c patch is planned for rewriting
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7900 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/au1000-2.6/patches')
-rw-r--r-- | target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch | 29 | ||||
-rw-r--r-- | target/linux/au1000-2.6/patches/010-au100_gpio_i2c.patch | 455 |
2 files changed, 0 insertions, 484 deletions
diff --git a/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch b/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch deleted file mode 100644 index 276659aded..0000000000 --- a/target/linux/au1000-2.6/patches/004-mtx1_watchdog.patch +++ /dev/null @@ -1,29 +0,0 @@ -diff -urN linux-2.6.21.1/drivers/char/watchdog/Kconfig linux-2.6.21.1.new/drivers/char/watchdog/Kconfig ---- linux-2.6.21.1/drivers/char/watchdog/Kconfig 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21.1.new/drivers/char/watchdog/Kconfig 2007-05-24 20:05:52.000000000 +0200 -@@ -586,6 +586,14 @@ - To compile this driver as a module, choose M here: the - module will be called rm9k_wdt. - -+config MTX1_WATCHDOG -+ tristate "MTX-1 Hardware Watchdog" -+ depends on WATCHDOG && MIPS_MTX1 -+ help -+ Hardware driver for the AccessCube MTX-1 watchdog. This is a -+ watchdog timer that will reboot the machine after a 100 seconds -+ timer expired. -+ - # S390 Architecture - - config ZVM_WATCHDOG -diff -urN linux-2.6.21.1/drivers/char/watchdog/Makefile linux-2.6.21.1.new/drivers/char/watchdog/Makefile ---- linux-2.6.21.1/drivers/char/watchdog/Makefile 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21.1.new/drivers/char/watchdog/Makefile 2007-05-24 20:05:41.000000000 +0200 -@@ -74,6 +74,7 @@ - # MIPS Architecture - obj-$(CONFIG_INDYDOG) += indydog.o - obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o -+obj-$(CONFIG_MTX1_WATCHDOG) += mtx-1_watchdog.o - - # S390 Architecture - diff --git a/target/linux/au1000-2.6/patches/010-au100_gpio_i2c.patch b/target/linux/au1000-2.6/patches/010-au100_gpio_i2c.patch deleted file mode 100644 index 8cb869ee2a..0000000000 --- a/target/linux/au1000-2.6/patches/010-au100_gpio_i2c.patch +++ /dev/null @@ -1,455 +0,0 @@ -diff -urN linux-2.6.19/drivers/i2c/busses/Kconfig linux-2.6.19.new/drivers/i2c/busses/Kconfig ---- linux-2.6.19/drivers/i2c/busses/Kconfig 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.new/drivers/i2c/busses/Kconfig 2006-12-28 17:04:34.000000000 +0100 -@@ -84,6 +84,17 @@ - This driver can also be built as a module. If so, the module - will be called i2c-au1550. - -+config I2C_AU1X00GPIO -+ tristate "Au1x00 i2c using GPIO pins" -+ depends on I2C -+ select I2C_ALGOBIT -+ help -+ If you say yest to this option, support will be included for the -+ Au1x00 GPIO interface. -+ -+ This driver can also be built as a module. If so, the module -+ will be called i2c-au1x00gpio. -+ - config I2C_ELEKTOR - tristate "Elektor ISA card" - depends on I2C && ISA && BROKEN_ON_SMP -diff -urN linux-2.6.19/drivers/i2c/busses/Makefile linux-2.6.19.new/drivers/i2c/busses/Makefile ---- linux-2.6.19/drivers/i2c/busses/Makefile 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.new/drivers/i2c/busses/Makefile 2006-12-28 03:07:37.000000000 +0100 -@@ -9,6 +9,7 @@ - obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o - obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o - obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o -+obj-$(CONFIG_I2C_AU1X00GPIO) += i2c-au1x00gpio.o - obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o - obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o - obj-$(CONFIG_I2C_I801) += i2c-i801.o -diff -urN linux-2.6.19/drivers/i2c/busses/i2c-au1x00gpio.c linux-2.6.19.new/drivers/i2c/busses/i2c-au1x00gpio.c ---- linux-2.6.19/drivers/i2c/busses/i2c-au1x00gpio.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/drivers/i2c/busses/i2c-au1x00gpio.c 2006-12-28 17:02:10.000000000 +0100 -@@ -0,0 +1,406 @@ -+/* ------------------------------------------------------------------------- */ -+/* i2c-au1x00gpio.c i2c-hw access for Au1x00 GPIO pins. */ -+/* ------------------------------------------------------------------------- */ -+/* Copyright (C) 1995-2000 Michael Stickel -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program; if not, write to the Free Software -+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -+/* ------------------------------------------------------------------------- */ -+ -+/* With some changes from Ky�stialkki <kmalkki@cc.hut.fi> and even -+ Frodo Looijaard <frodol@dds.nl> -+ Simon G. Vogl -+*/ -+ -+/* $Id: i2c-au1x00gpio.c,v 1.1.1.2 2004/01/22 15:35:47 br1 Exp $ */ -+ -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/stddef.h> -+#include <linux/ioport.h> -+#include <asm/uaccess.h> -+#include <asm/io.h> -+#include <asm-mips/mach-au1x00/au1000.h> -+#include <asm-mips/mach-au1x00/au1000_gpio.h> -+ -+#include <linux/slab.h> -+#include <linux/mm.h> -+ -+#include <linux/i2c.h> -+#include <linux/i2c-algo-bit.h> -+ -+struct i2c_au1x00gpio -+{ -+ struct i2c_au1x00gpio *next; -+ -+ short scl_gpio; -+ short sda_gpio; -+ -+ unsigned long scl_mask; -+ unsigned long sda_mask; -+ -+ struct i2c_adapter adapter; -+ struct i2c_algo_bit_data bit_au1x00gpio_data; -+}; -+ -+static struct i2c_au1x00gpio *adapter_list; -+ -+ -+ -+/* ----- global defines ----------------------------------------------- */ -+#define DEB(x) /* should be reasonable open, close &c. */ -+#define DEB2(x) /* low level debugging - very slow */ -+#define DEBE(x) x /* error messages */ -+ -+/* ----- printer port defines ------------------------------------------*/ -+ -+/* ----- local functions ---------------------------------------------- */ -+ -+ -+//-- Primary GPIO -+static void bit_au1x00gpio_setscl(void *data, int state) -+{ -+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data; -+ if (state) -+ au_writel(adapter->scl_mask, SYS_TRIOUTCLR); // Disable Driver: Switch off Transistor => 1 -+ else -+ au_writel(adapter->scl_mask, SYS_OUTPUTCLR); // Clear Output and switch on Transistor => 0 -+} -+ -+ -+static void bit_au1x00gpio_setsda(void *data, int state) -+{ -+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data; -+ if (state) -+ au_writel(adapter->sda_mask, SYS_TRIOUTCLR); -+ else -+ au_writel(adapter->sda_mask, SYS_OUTPUTCLR); -+} -+ -+ -+static int bit_au1x00gpio_getscl(void *data) -+{ -+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data; -+ return (au_readl(SYS_PINSTATERD) & adapter->scl_mask) ? 1 : 0; -+} -+ -+ -+static int bit_au1x00gpio_getsda(void *data) -+{ -+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data; -+ return (au_readl(SYS_PINSTATERD) & adapter->sda_mask) ? 1 : 0; -+} -+ -+ -+ -+ -+/*-- -+ *-- Functions for accessing GPIO-2 -+ *-- -+ */ -+static void bit_au1x00gpio2_setscl(void *data, int state) -+{ -+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data; -+ if (state) -+ { -+ au_writel(au_readl(GPIO2_DIR) & ~adapter->scl_mask, GPIO2_DIR); -+ } -+ else -+ { -+ au_writel(au_readl(GPIO2_OUTPUT) & ~adapter->scl_mask, GPIO2_OUTPUT); -+ au_writel(au_readl(GPIO2_DIR) | adapter->scl_mask, GPIO2_DIR); -+ } -+} -+ -+static void bit_au1x00gpio2_setsda(void *data, int state) -+{ -+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data; -+ if (state) -+ { -+ au_writel(au_readl(GPIO2_DIR) & ~adapter->sda_mask, GPIO2_DIR); -+ } -+ else -+ { -+ au_writel(au_readl(GPIO2_OUTPUT) & ~adapter->sda_mask, GPIO2_OUTPUT); -+ au_writel(au_readl(GPIO2_DIR) | adapter->sda_mask, GPIO2_DIR); -+ } -+} -+ -+static int bit_au1x00gpio2_getscl(void *data) -+{ -+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data; -+ return (au_readl(GPIO2_PINSTATE) & adapter->scl_mask) ? 1 : 0; -+} -+ -+static int bit_au1x00gpio2_getsda(void *data) -+{ -+ struct i2c_au1x00gpio * adapter = (struct i2c_au1x00gpio *)data; -+ return (au_readl(GPIO2_PINSTATE) & adapter->sda_mask) ? 1 : 0; -+} -+ -+ -+ -+static int check_i2c_au1x00gpio_adapter(struct i2c_au1x00gpio *adapter) -+{ -+ int state = 0; -+ -+ adapter->bit_au1x00gpio_data.setsda (adapter, 1); -+ adapter->bit_au1x00gpio_data.setscl (adapter, 1); -+ -+ if (adapter->bit_au1x00gpio_data.getsda(adapter)==0) -+ { -+ printk ("i2c-au1x00gpio: sda line should read 1 but reads 0\n"); -+ state = -1; -+ } -+ if (adapter->bit_au1x00gpio_data.getscl(adapter)==0) -+ { -+ printk ("i2c-au1x00gpio: scl line should read 1 but reads 0\n"); -+ state = -1; -+ } -+ -+ -+ adapter->bit_au1x00gpio_data.setsda (adapter, 0); -+ adapter->bit_au1x00gpio_data.setscl (adapter, 0); -+ -+ if (adapter->bit_au1x00gpio_data.getsda(adapter)==1) -+ { -+ printk ("i2c-au1x00gpio: sda line should read 0 but reads 1\n"); -+ state = -1; -+ } -+ if (adapter->bit_au1x00gpio_data.getscl(adapter)==1) -+ { -+ printk ("i2c-au1x00gpio: scl line should read 0 but reads 1\n"); -+ state = -1; -+ } -+ -+ if (state==0) -+ printk ("i2c-au1x00gpio: adapter with scl=GPIO%d,sda=GPIO%d is working\n", -+ adapter->scl_gpio, adapter->sda_gpio -+ ); -+ return state; -+} -+ -+ -+ -+#if 0 -+static int bit_au1x00gpio_reg(struct i2c_client *client) -+{ -+ return 0; -+} -+ -+static int bit_au1x00gpio_unreg(struct i2c_client *client) -+{ -+ return 0; -+} -+ -+static void bit_au1x00gpio_inc_use(struct i2c_adapter *adap) -+{ -+ MOD_INC_USE_COUNT; -+} -+ -+static void bit_au1x00gpio_dec_use(struct i2c_adapter *adap) -+{ -+ MOD_DEC_USE_COUNT; -+} -+#endif -+ -+ -+ -+static struct i2c_algo_bit_data bit_au1x00gpio_data = { -+ .data = NULL, -+ .setsda = bit_au1x00gpio_setsda, -+ .setscl = bit_au1x00gpio_setscl, -+ .getsda = bit_au1x00gpio_getsda, -+ .getscl = bit_au1x00gpio_getscl, -+ .udelay = 80, -+ .timeout = HZ, -+}; -+ -+ -+static struct i2c_adapter bit_au1x00gpio_ops = { -+ .owner = THIS_MODULE, -+ .name = "Au1x00 GPIO I2C adapter", -+ .id = I2C_HW_B_AU1x00GPIO, -+}; -+ -+ -+ -+/* -+ * scl_gpio: -+ * 0..31 for primary GPIO's -+ * 200..215 for secondary GPIO's -+ * -+ * sda_gpio: -+ * 0..31 for primary GPIO's -+ * 200..215 for secondary GPIO's -+ * -+ * You can even mix primary and secondary GPIO's. -+ * E.g.: i2c_au1x00gpio_create(4,206); -+ */ -+ -+static int i2c_au1x00gpio_create (int scl_gpio, int sda_gpio) -+{ -+ if ((scl_gpio < 32 || (scl_gpio >= 200 && scl_gpio <= 215)) && -+ (scl_gpio < 32 || (scl_gpio >= 200 && scl_gpio <= 215))) -+ { -+ struct i2c_au1x00gpio *adapter = kmalloc(sizeof(struct i2c_au1x00gpio), -+ GFP_KERNEL); -+ if (!adapter) { -+ printk(KERN_ERR "i2c-au1x00-gpio: Unable to malloc.\n"); -+ return -1; -+ } -+ -+ printk(KERN_DEBUG "i2c-au1x00-gpio.o: attaching to SCL=GPIO%d, SDA=GPIO%d\n", -+ scl_gpio, sda_gpio); -+ -+ memset (adapter, 0, sizeof(struct i2c_au1x00gpio)); -+ -+ adapter->adapter = bit_au1x00gpio_ops; -+ -+ adapter->adapter.algo_data = &adapter->bit_au1x00gpio_data; -+ adapter->bit_au1x00gpio_data = bit_au1x00gpio_data; -+ adapter->bit_au1x00gpio_data.data = adapter; -+ -+ adapter->bit_au1x00gpio_data.data = adapter; -+ -+ adapter->scl_gpio = scl_gpio; -+ adapter->sda_gpio = sda_gpio; -+ -+ if (sda_gpio < 32) -+ { -+ adapter->bit_au1x00gpio_data.setsda = bit_au1x00gpio_setsda; -+ adapter->bit_au1x00gpio_data.getsda = bit_au1x00gpio_getsda; -+ adapter->sda_mask = 1<<sda_gpio; -+ } -+ else if (sda_gpio >= 200 && sda_gpio <= 215) -+ { -+ adapter->bit_au1x00gpio_data.setsda = bit_au1x00gpio2_setsda; -+ adapter->bit_au1x00gpio_data.getsda = bit_au1x00gpio2_getsda; -+ adapter->sda_mask = 1<<(sda_gpio-200); -+ } -+ -+ -+ if (scl_gpio < 32) -+ { -+ adapter->bit_au1x00gpio_data.setscl = bit_au1x00gpio_setscl; -+ adapter->bit_au1x00gpio_data.getscl = bit_au1x00gpio_getscl; -+ adapter->scl_mask = 1<<scl_gpio; -+ } -+ else if (scl_gpio >= 200 && scl_gpio <= 215) -+ { -+ adapter->bit_au1x00gpio_data.setscl = bit_au1x00gpio2_setscl; -+ adapter->bit_au1x00gpio_data.getscl = bit_au1x00gpio2_getscl; -+ adapter->scl_mask = 1<<(scl_gpio-200); -+ } -+ -+ au_writel(0L, SYS_PININPUTEN); -+ if (check_i2c_au1x00gpio_adapter(adapter)==0) -+ { -+ adapter->bit_au1x00gpio_data.setsda (adapter, 1); -+ adapter->bit_au1x00gpio_data.setscl (adapter, 1); -+ -+ if (i2c_bit_add_bus(&adapter->adapter) < 0) -+ { -+ printk(KERN_ERR "i2c-au1x00-gpio: Unable to register with I2C.\n"); -+ kfree(adapter); -+ return -1; /* No good */ -+ } -+ -+ adapter->next = adapter_list; -+ adapter_list = adapter; -+ return 0; -+ } -+ } -+ else -+ printk(KERN_ERR "i2c-au1x00-gpio: Invalid argument scl_gpio=%d, sda_gpio=%d.\n", scl_gpio, sda_gpio); -+ return -1; -+} -+ -+ -+ -+static void i2c_au1x00gpio_delete (int scl_gpio, int sda_gpio) -+{ -+ struct i2c_au1x00gpio *adapter, *prev = NULL; -+ -+ for (adapter = adapter_list; adapter; adapter = adapter->next) -+ { -+ if (adapter->scl_gpio == scl_gpio && -+ adapter->sda_gpio == sda_gpio) -+ { -+ i2c_del_adapter(&adapter->adapter); -+ if (prev) -+ prev->next = adapter->next; -+ else -+ adapter_list = adapter->next; -+ kfree(adapter); -+ return; -+ } -+ prev = adapter; -+ } -+} -+ -+ -+ -+ -+ -+#ifndef CONFIG_I2C_AU1X00GPIO_SCL -+#define CONFIG_I2C_AU1X00GPIO_SCL (210) -+#endif -+ -+#ifndef CONFIG_I2C_AU1X00GPIO_SDA -+#define CONFIG_I2C_AU1X00GPIO_SDA (9) -+#endif -+ -+static int au1x00gpiopin_scl = CONFIG_I2C_AU1X00GPIO_SCL; -+static int au1x00gpiopin_sda = CONFIG_I2C_AU1X00GPIO_SDA; -+ -+ -+ -+static int __init i2c_bit_au1x00gpio_init(void) -+{ -+ printk(KERN_INFO "i2c-au1x00gpio.o: i2c Au1x00 GPIO adapter module version\n"); -+ -+ if (i2c_au1x00gpio_create (au1x00gpiopin_scl, au1x00gpiopin_sda) == 0) -+ { -+ printk(KERN_INFO "i2c-au1x00gpio.o: registered I2C-Bus for GPIO%d,GPIO%d\n", -+ au1x00gpiopin_scl, au1x00gpiopin_sda -+ ); -+ return 0; -+ } -+ printk(KERN_INFO "i2c-au1x00gpio.o: failed to register I2C-Bus for GPIO%d,GPIO%d\n", -+ au1x00gpiopin_scl, au1x00gpiopin_sda -+ ); -+ return -1; -+} -+ -+ -+static void __exit i2c_bit_au1x00gpio_exit(void) -+{ -+ i2c_au1x00gpio_delete (au1x00gpiopin_scl, au1x00gpiopin_sda); -+} -+ -+module_param(au1x00gpiopin_scl, int, 0644); -+MODULE_PARM_DESC(au1x00gpiopin_scl, "GPIO pin number used for SCL pin."); -+ -+module_param(au1x00gpiopin_sda, int, 0644); -+MODULE_PARM_DESC(au1x00gpiopin_sda, "GPIO pin number used for SDA pin."); -+ -+MODULE_AUTHOR("Michael Stickel <michael@cubic.org>"); -+MODULE_DESCRIPTION("I2C-Bus adapter routines for Au1x00 GPIO adapter."); -+MODULE_LICENSE("GPL"); -+ -+module_init(i2c_bit_au1x00gpio_init); -+module_exit(i2c_bit_au1x00gpio_exit); -diff -urN linux-2.6.19/include/linux/i2c-id.h linux-2.6.19.new/include/linux/i2c-id.h ---- linux-2.6.19/include/linux/i2c-id.h 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.new/include/linux/i2c-id.h 2006-12-28 03:12:15.000000000 +0100 -@@ -231,6 +231,9 @@ - /* --- Au1550 PSC adapters adapters */ - #define I2C_HW_AU1550_PSC 0x1b0000 - -+/* --- Au1x00 i2c GPIO adapter */ -+#define I2C_HW_B_AU1x00GPIO 0x1b -+ - /* --- SMBus only adapters */ - #define I2C_HW_SMBUS_PIIX4 0x040000 - #define I2C_HW_SMBUS_ALI15X3 0x040001 |