at91: remove linux 3.10 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43688 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 files changed, 0 insertions, 328 deletions

diff --git a/target/linux/at91/files-3.10/arch/arm/boot/dts/lmu5000.dts b/target/linux/at91/files-3.10/arch/arm/boot/dts/lmu5000.dts
deleted file mode 100644
index 671f452416..0000000000
--- a/target/linux/at91/files-3.10/arch/arm/boot/dts/lmu5000.dts
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * lmu5000.dst - Device Tree file for CalAmp LMU5000 board
- *
- * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
- *
- * Licensed under GPLv2.
- */
-/dts-v1/;
-/include/ "at91sam9g20.dtsi"
-
-/ {
-	model = "CalAmp LMU5000";
-	compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
-	};
-
-	memory {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				board {
-					pinctrl_pck0_as_mck: pck0_as_mck {
-						atmel,pins =
-							<2 1 0x2 0x0>;	/* PC1 periph B */
-					};
-
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart0: serial@fffb0000 {
-				pinctrl-0 =
-					<&pinctrl_usart0
-					 &pinctrl_usart0_rts
-					 &pinctrl_usart0_cts
-					 &pinctrl_usart0_dtr_dsr
-					 &pinctrl_usart0_dcd
-					 &pinctrl_usart0_ri>;
-				status = "okay";
-			};
-
-			usart2: serial@fffb8000 {
-				status = "okay";
-			};
-
-			uart0: serial@fffd4000 {
-				status = "okay";
-			};
-
-			uart1: serial@fffd8000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "mii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 0>;
-				status = "okay";
-			};
-
-			ssc0: ssc@fffbc000 {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_ssc0_tx>;
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-
-			kernel@0 {
-				label = "kernel";
-				reg = <0x0 0x400000>;
-			};
-
-			rootfs@400000 {
-				label = "rootfs";
-				reg = <0x400000 0x3C00000>;
-			};
-
-			user1@4000000 {
-				label = "user1";
-				reg = <0x4000000 0x2000000>;
-			};
-
-			user2@6000000 {
-				label = "user2";
-				reg = <0x6000000 0x2000000>;
-			};
-		};
-
-		usb0: ohci@00500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-	};
-};
diff --git a/target/linux/at91/files-3.10/drivers/mtd/at91part.c b/target/linux/at91/files-3.10/drivers/mtd/at91part.c
deleted file mode 100644
index 31f3bbd69d..0000000000
--- a/target/linux/at91/files-3.10/drivers/mtd/at91part.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * 
- * Copyright (C) 2007 OpenWrt.org
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * Atmel AT91 flash partition table. (Modified by Hamish Guthrie).
- * Based on ar7 map by Felix Fietkau.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/bootmem.h>
-#include <linux/squashfs_fs.h>
-
-static struct mtd_partition at91_parts[6];
-
-static int create_mtd_partitions(struct mtd_info *master, 
-				 struct mtd_partition **pparts, 
-				 unsigned long origin)
-{
-	unsigned int offset, len;
-	unsigned int pre_size = 0x42000, root_max = 0x362400;
-	unsigned char buf[512];
-	struct squashfs_super_block *sb = (struct squashfs_super_block *) buf;
-
-	printk("Parsing AT91 partition map...\n");
-
-	at91_parts[0].name = "loaders";
-	at91_parts[0].offset = 0;
-	at91_parts[0].size = 0x21000;
-	at91_parts[0].mask_flags = MTD_WRITEABLE;
-
-	at91_parts[1].name = "ubparams";
-	at91_parts[1].offset = 0x21000;
-	at91_parts[1].size = 0x8400;
-	at91_parts[1].mask_flags = 0;
-
-	at91_parts[2].name = "kernel";
-	at91_parts[2].offset = pre_size;
-	at91_parts[2].size = 0;
-	at91_parts[2].mask_flags = 0;
-
-	at91_parts[3].name = "rootfs";
-	at91_parts[3].offset = 0;
-	at91_parts[3].size = 0;
-	at91_parts[3].mask_flags = 0;
-
-	for(offset = pre_size; offset < root_max; offset += master->erasesize) {
-
-		memset(&buf, 0xe5, sizeof(buf));
-
-		if (master->read(master, offset, sizeof(buf), &len, buf) || len != sizeof(buf))
-			break;
-
-		if (*((__u32 *) buf) == SQUASHFS_MAGIC) {
-			printk(KERN_INFO "%s: Filesystem type: squashfs, size=0x%x\n",
-							master->name, (u32) sb->bytes_used);
-
-			at91_parts[3].size = sb->bytes_used;
-			at91_parts[3].offset = offset;
-			len = at91_parts[3].offset + at91_parts[3].size;
-			len = ((len / (master->erasesize * 8)) + 1) * master->erasesize * 8;
-			at91_parts[3].size = len - at91_parts[3].offset;
-			at91_parts[2].size = offset - at91_parts[2].offset;
-			break;
-			}
-		}
-
-	if (at91_parts[3].size == 0) {
-		printk(KERN_NOTICE "%s: Couldn't find root filesystem\n", master->name);
-		return -1;
-		}
-
-	at91_parts[4].name = "rootfs_data";
-	at91_parts[4].offset = root_max;
-	at91_parts[4].size = master->size - root_max;
-	at91_parts[4].mask_flags = 0;
-
-	at91_parts[5].name = "complete";
-	at91_parts[5].offset = 0;
-	at91_parts[5].size = master->size;
-	at91_parts[5].mask_flags = 0;
-
-	*pparts = at91_parts;
-	return 6;
-}
-
-static struct mtd_part_parser at91_parser = {
-	.owner = THIS_MODULE,
-	.parse_fn = create_mtd_partitions,
-	.name = "at91part",
-};
-
-static int __init at91_parser_init(void)
-{
-	register_mtd_parser(&at91_parser);
-
-	return 0;
-}
-
-module_init(at91_parser_init);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Felix Fietkau, Eugene Konev, Hamish Guthrie");
-MODULE_DESCRIPTION("MTD partitioning for Atmel at91");
diff --git a/target/linux/at91/patches-3.10/100-ARM-at91-build-dtb-for-LMU5000.patch b/target/linux/at91/patches-3.10/100-ARM-at91-build-dtb-for-LMU5000.patch
deleted file mode 100644
index c631f8d588..0000000000
--- a/target/linux/at91/patches-3.10/100-ARM-at91-build-dtb-for-LMU5000.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb
- dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
- # sam9g45
- dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
-+dtb-$(CONFIG_ARCH_AT91) += lmu5000.dtb
- dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
- # sam9n12
- dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
diff --git a/target/linux/at91/patches-3.10/805-free_some_portc_pins.patch b/target/linux/at91/patches-3.10/805-free_some_portc_pins.patch
deleted file mode 100644
index a9694d1f01..0000000000
--- a/target/linux/at91/patches-3.10/805-free_some_portc_pins.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/mach-at91/at91sam9260_devices.c
-+++ b/arch/arm/mach-at91/at91sam9260_devices.c
-@@ -507,7 +507,7 @@ static struct platform_device at91sam926
- 	.num_resources	= ARRAY_SIZE(spi1_resources),
- };
- 
--static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
-+static const unsigned spi1_standard_cs[2] = { AT91_PIN_PB3, AT91_PIN_PC5 };
- 
- void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
- {
diff --git a/target/linux/at91/patches-3.10/901-AT91-flexibity-default-leds-to-heartbeat.patch b/target/linux/at91/patches-3.10/901-AT91-flexibity-default-leds-to-heartbeat.patch
deleted file mode 100644
index a97850ac91..0000000000
--- a/target/linux/at91/patches-3.10/901-AT91-flexibity-default-leds-to-heartbeat.patch
+++ /dev/null
@@ -1,60 +0,0 @@
---- a/arch/arm/mach-at91/board-flexibity.c
-+++ b/arch/arm/mach-at91/board-flexibity.c
-@@ -89,49 +89,49 @@ static struct gpio_led flexibity_leds[]
- 		.name			= "usb1:green",
- 		.gpio			= AT91_PIN_PA12,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	},
- 	{
- 		.name			= "usb1:red",
- 		.gpio			= AT91_PIN_PA13,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	},
- 	{
- 		.name			= "usb2:green",
- 		.gpio			= AT91_PIN_PB26,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	},
- 	{
- 		.name			= "usb2:red",
- 		.gpio			= AT91_PIN_PB27,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	},
- 	{
- 		.name			= "usb3:green",
- 		.gpio			= AT91_PIN_PC8,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	},
- 	{
- 		.name			= "usb3:red",
- 		.gpio			= AT91_PIN_PC6,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	},
- 	{
- 		.name			= "usb4:green",
- 		.gpio			= AT91_PIN_PB4,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	},
- 	{
- 		.name			= "usb4:red",
- 		.gpio			= AT91_PIN_PB5,
- 		.active_low		= 1,
--		.default_trigger	= "default-on",
-+		.default_trigger	= "heartbeat",
- 	}
- };
-