strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 186 deletions

diff --git a/target/linux/amazon-2.6/files/arch/mips/amazon/setup.c b/target/linux/amazon-2.6/files/arch/mips/amazon/setup.c
deleted file mode 100644
index a96b565c69..0000000000
--- a/target/linux/amazon-2.6/files/arch/mips/amazon/setup.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *	 Copyright (C) 2004 Peng Liu <peng.liu@infineon.com>
- *	 Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *	 Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- *	 
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <asm/time.h>
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/model.h>
-
-extern void prom_printf(const char * fmt, ...);
-static void amazon_reboot_setup(void);
-
-/* the CPU clock rate - lifted from u-boot */
-unsigned int amazon_get_cpu_hz(void)
-{
-	/*-----------------------------------*/
-	/**CGU CPU Clock Reduction Register***/ 
-	/*-----------------------------------*/
-	switch(amazon_readl(AMAZON_CGU_CPUCRD) & 0x3){
-		case 0:
-			/*divider ration 1/1, 235 MHz clock */
-			return 235000000;
-		case 1:
-			/*divider ration 2/3, 235 MHz clock, clock not accurate, here */
-			return 150000000;
-		case 2:
-			/*divider ration 1/2, 235 MHz clock */
-			return 117500000;
-		default:
-			/*divider ration 1/4, 235 MHz clock */
-			return 58750000;
-	}
-}
-
-/* the FPI clock rate - lifted from u-boot */
-unsigned int amazon_get_fpi_hz(void)
-{
-	unsigned int  clkCPU;
-	clkCPU = amazon_get_cpu_hz();
-
-	/*-------------------------------------*/
-	/***CGU Clock Divider Select Register***/
-	/*-------------------------------------*/
-	switch (amazon_readl(AMAZON_CGU_DIV) & 0x3)
-	{
-		case 1:
-			return clkCPU >> 1;
-		case 2:
-			return clkCPU >> 2;
-		default:
-			return clkCPU;
-		/* '11' is reserved */
-	}
-}
-
-/* this doesn't really belong here, but it's a convenient location */
-unsigned int amazon_get_cpu_ver(void)
-{
-	static unsigned int cpu_ver = 0;
-	if (cpu_ver == 0)
-		cpu_ver = amazon_readl(AMAZON_MCD_CHIPID) & 0xFFFFF000;
-	return cpu_ver;
-}
-
-void amazon_time_init(void)
-{
-	mips_hpt_frequency = amazon_get_cpu_hz()/2;
-	printk("mips_hpt_frequency:%d\n", mips_hpt_frequency);
-}
-
-extern int hr_time_resolution;
-
-/* ISR GPTU Timer 6 for high resolution timer */
-static void amazon_timer6_interrupt(int irq, void *dev_id)
-{
-	timer_interrupt(AMAZON_TIMER6_INT, NULL);
-}
-
-static struct irqaction hrt_irqaction = {
-	.handler = amazon_timer6_interrupt,
-	.flags = SA_INTERRUPT,
-	.name = "hrt",
-};
-
-/*
- * THe CPU counter for System timer, set to HZ
- * GPTU Timer 6 for high resolution timer, set to hr_time_resolution
- * Also misuse this routine to print out the CPU type and clock.
- */
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	/* cpu counter for timer interrupts */
-	setup_irq(MIPS_CPU_TIMER_IRQ, irq);
-
-	/* enable the timer in the PMU */
-	amazon_writel(amazon_readl(AMAZON_PMU_PWDCR)| AMAZON_PMU_PWDCR_GPT|AMAZON_PMU_PWDCR_FPI, AMAZON_PMU_PWDCR);
-	
-	/* setup the GPTU for timer tick  f_fpi == f_gptu*/
-	amazon_writel(0x0100, AMAZON_GPTU_CLC);
-	amazon_writel(0xffff, AMAZON_GPTU_CAPREL);
-	amazon_writel(0x80C0, AMAZON_GPTU_T6CON);
-}
-
-void __init plat_mem_setup(void)
-{	
-	u32 chipid = 0;
-	u32 part_no = 0;
-	
-	chipid = amazon_readl(AMAZON_MCD_CHIPID);
-	part_no = AMAZON_MCD_CHIPID_PART_NUMBER_GET(chipid);
-	
-	if(part_no == AMAZON_CHIPID_YANGTSE){
-		prom_printf("Yangtse Version\n");	
-	} else if (part_no == AMAZON_CHIPID_STANDARD) {
-		prom_printf(SYSTEM_MODEL_NAME "\n");
-	} else {
-		prom_printf("unknown version %8x\n",part_no);
-	}
-	
-	amazon_reboot_setup();
-	board_time_init = amazon_time_init;
-
-	//stop reset TPE and DFE
-	amazon_writel(0, AMAZON_RST_REQ);
-	//clock
-	amazon_writel(0x3fff, AMAZON_PMU_PWDCR);
-	//reenable trace capability
-	part_no = readl(AMAZON_BCU_ECON);
-}
-
-static void amazon_machine_restart(char *command)
-{
-    local_irq_disable();
-    amazon_writel(AMAZON_RST_ALL, AMAZON_RST_REQ);
-    for (;;) ;
-}
-
-static void amazon_machine_halt(void)
-{
-    printk(KERN_NOTICE "System halted.\n");
-    local_irq_disable();
-    for (;;) ;
-}
-
-static void amazon_machine_power_off(void)
-{
-	printk(KERN_NOTICE "Please turn off the power now.\n");
-    local_irq_disable();
-    for (;;) ;
-}
-
-static void amazon_reboot_setup(void)
-{
-	_machine_restart = amazon_machine_restart;
-	_machine_halt = amazon_machine_halt;
-	pm_power_off = amazon_machine_power_off;
-}