add documentation for wrt54gs v1.0

git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@286 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 files changed, 309 insertions, 0 deletions

diff --git a/docs/hardware/linksys/wrt54gs_v10/cpuinfo.txt b/docs/hardware/linksys/wrt54gs_v10/cpuinfo.txt
new file mode 100644
index 0000000000..404c148b69
--- /dev/null
+++ b/docs/hardware/linksys/wrt54gs_v10/cpuinfo.txt
@@ -0,0 +1,16 @@
+system type   : Broadcom BCM947XX
+processor   : 0
+cpu model   : BCM3302 V0.7
+BogoMIPS    : 199.06
+wait instruction  : no
+microsecond timers  : yes
+tlb_entries   : 32
+extra interrupt vector  : no
+hardware watchpoint : no
+VCED exceptions   : not available
+VCEI exceptions   : not available
+dcache hits   : 4278190076
+dcache misses   : 1840115641
+icache hits   : 4294967071
+icache misses   : 4294967287
+instructions    : 0
diff --git a/docs/hardware/linksys/wrt54gs_v10/dmesg-2_4_29.txt b/docs/hardware/linksys/wrt54gs_v10/dmesg-2_4_29.txt
new file mode 100644
index 0000000000..de5f8d8240
--- /dev/null
+++ b/docs/hardware/linksys/wrt54gs_v10/dmesg-2_4_29.txt
@@ -0,0 +1,88 @@
+CPU revision is: 00029007
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.29 (wbx@auriga) (gcc version 3.3.5) #1 Mon Feb 21 17:40:12 CET 2005
+Determined physical RAM map:
+memory: 02000000 @ 00000000 (usable)
+On node 0 totalpages: 8192
+zone(0): 8192 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 rootfstype=jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4712 rev 1 at 200 MHz
+Using 100.000 MHz high precision timer.
+Calibrating delay loop... 199.06 BogoMIPS
+Memory: 30260k/32768k available (1477k kernel code, 2508k reserved, 100k data, 100k init, 0k highmem)
+Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
+Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Disabled
+PCI: Fixing up bus 0
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xb8000300 (irq = 3) is a 16550A
+ttyS01 at 0xb8000400 (irq = 0) is a 16550A
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+PPP generic driver version 2.4.2
+Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
+cfi_cmdset_0001: Erase suspend on write enabled
+0: offset=0x0,size=0x20000,blocks=64
+Using buffer write method
+Flash device: 0x800000 at 0x1c000000
+Creating 5 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x007e0000 : "linux"
+0x00100000-0x002a0000 : "rootfs"
+0x007e0000-0x00800000 : "nvram"
+0x002a0000-0x007e0000 : "OpenWrt"
+sflash: found no supported devices
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 2048 bind 4096)
+ip_conntrack version 2.1 (256 buckets, 2048 max) - 288 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (jffs2 filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 100k freed
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 00000101
+using v2 hardware
+led -> 00
+led -> 01
+jffs2.bbc: SIZE compression mode activated.
+PCI: Setting latency timer of device 00:02.0 to 64
+5325E phy=FFFFFFFF
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 00:01.0 to 64
+eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+vlan0: add 01:00:5e:00:00:01 mcast address to master interface
+device eth1 entered promiscuous mode
+br0: port 2(eth1) entering learning state
+br0: port 1(vlan0) entering learning state
+br0: port 2(eth1) entering forwarding state
+br0: topology change detected, propagating
+br0: port 1(vlan0) entering forwarding state
+br0: topology change detected, propagating
+vlan1: add 01:00:5e:00:00:01 mcast address to master interface
diff --git a/docs/hardware/linksys/wrt54gs_v10/ifconfig.txt b/docs/hardware/linksys/wrt54gs_v10/ifconfig.txt
new file mode 100644
index 0000000000..8e205ef5c6
--- /dev/null
+++ b/docs/hardware/linksys/wrt54gs_v10/ifconfig.txt
@@ -0,0 +1,45 @@
+br0       Link encap:Ethernet  HWaddr 00:0F:66:C8:74:44
+          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
+
+eth0      Link encap:Ethernet  HWaddr 00:0F:66:C8:74:44
+          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000
+          RX bytes:0 (0.0 B)  TX bytes:39204 (38.2 KiB)
+          Interrupt:5 Base address:0x2000
+
+eth1      Link encap:Ethernet  HWaddr 00:0F:66:C8:74:46
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:7245
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
+          Interrupt:4 Base address:0x1000
+
+lo        Link encap:Local Loopback
+          inet addr:127.0.0.1  Mask:255.0.0.0
+          UP LOOPBACK RUNNING  MTU:16436  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
+
+vlan0     Link encap:Ethernet  HWaddr 00:0F:66:C8:74:44
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
+
+vlan1     Link encap:Ethernet  HWaddr 00:0F:66:C8:74:44
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:0 (0.0 B)  TX bytes:39204 (38.2 KiB)
diff --git a/docs/hardware/linksys/wrt54gs_v10/info.txt b/docs/hardware/linksys/wrt54gs_v10/info.txt
new file mode 100644
index 0000000000..23c2271ef7
--- /dev/null
+++ b/docs/hardware/linksys/wrt54gs_v10/info.txt
@@ -0,0 +1,18 @@
+Linksys WRT54GS v1.0
+
+Online Description from Linksys:
+http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=610
+
+CPU: BCM4712 at 200 MHz
+RAM: 32 MB
+Flash: 8 MB
+1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
+1 Broadcom BCM4320 802.11 Wireless Controller 
+serial port possible
+JTAG interface
+
+List of files:
+nvram.txt: contents of NVRAM after nvram erase in CFE 
+cpuinfo.txt: contents of /proc/cpuinfo (2.4.29)
+pci.txt:  contents of /proc/pci (2.4.29)
+dmesg-2_4_29.txt: dmesg from Kernel 2.4.29
diff --git a/docs/hardware/linksys/wrt54gs_v10/nvram.txt b/docs/hardware/linksys/wrt54gs_v10/nvram.txt
new file mode 100644
index 0000000000..bf70a4bf02
--- /dev/null
+++ b/docs/hardware/linksys/wrt54gs_v10/nvram.txt
@@ -0,0 +1,105 @@
+aa0=3
+ag0=255
+boardflags2=0
+boardflags=0x0388
+boardnum=42
+boardrev=0x10
+boardtype=0x0101
+boot_ver=v3.2
+boot_wait=yes
+ccode=0
+cctl=0
+clkfreq=200
+dl_ram_addr=a0001000
+et0macaddr=00:0F:66:C8:74:44
+et0mdcport=0
+et0phyaddr=30
+gpio2=adm_eecs
+gpio3=adm_eesk
+gpio5=adm_eedi
+gpio6=adm_rc
+il0macaddr=00:0f:66:c8:74:46
+lan_ipaddr=192.168.1.1
+lan_netmask=255.255.255.0
+os_flash_addr=bfc40000
+os_ram_addr=80001000
+pa0b0=0x170c
+pa0b1=0xfa24
+pa0b2=0xfe70
+pa0itssit=62
+pa0maxpwr=0x48
+pmon_ver=CFE 3.61.13.0
+scratch=a0180000
+sdram_config=0x0022
+sdram_init=0x0008
+sdram_ncdl=0x24
+sdram_refresh=0x0000
+sromrev=2
+vlan0hwname=et0
+vlan0ports=1 2 3 4 5*
+vlan1hwname=et0
+vlan1ports=0 5
+watchdog=5000
+wl0_active_mac=
+wl0_afterburner=auto
+wl0_antdiv=-1
+wl0_ap_ip=
+wl0_ap_isolate=0
+wl0_ap_ssid=
+wl0_auth=0
+wl0_auth_mode=open
+wl0_bcn=100
+wl0_channel=6
+wl0_closed=0
+wl0_corerev=7
+wl0_country=Worldwide
+wl0_country_code=AU
+wl0_crypto=tkip
+wl0_dtim=1
+wl0_frag=2346
+wl0_frameburst=on
+wl0_gmode=6
+wl0_gmode_protection=off
+wl0_hwaddr=00:0F:66:C8:74:46
+wl0_ifname=eth1
+wl0_infra=1
+wl0_key1=
+wl0_key2=
+wl0_key3=
+wl0_key4=
+wl0_key=1
+wl0_lazywds=1
+wl0_mac_deny=
+wl0_mac_list=
+wl0_maclist=
+wl0_macmode1=disabled
+wl0_macmode=disabled
+wl0_mode=ap
+wl0_mrate=0
+wl0_net_mode=mixed
+wl0_passphrase=
+wl0_phytype=g
+wl0_phytypes=g
+wl0_plcphdr=long
+wl0_radio=1
+wl0_radioids=BCM2050
+wl0_radius_ipaddr=
+wl0_radius_key=
+wl0_radius_port=1812
+wl0_rate=0
+wl0_rateset=default
+wl0_rts=2347
+wl0_ssid=linksys
+wl0_unit=0
+wl0_wds=
+wl0_wep=disabled
+wl0_wep_bit=64
+wl0_wep_buf=
+wl0_wep_gen=
+wl0_wep_last=
+wl0_wpa_gtk_rekey=3600
+wl0_wpa_psk=
+wl0gpio2=0
+wl0gpio3=0
+wl0id=0x4320
+wl_country_code=AU
diff --git a/docs/hardware/linksys/wrt54gs_v10/pci.txt b/docs/hardware/linksys/wrt54gs_v10/pci.txt
new file mode 100644
index 0000000000..2be172663f
--- /dev/null
+++ b/docs/hardware/linksys/wrt54gs_v10/pci.txt
@@ -0,0 +1,37 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0501: PCI device 14e4:0800 (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
+      Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff].
+      Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff].
+      Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff].
+  Bus  0, device   1, function  0:
+    Class 0280: PCI device 14e4:4320 (rev 1).
+      IRQ 4.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
+  Bus  0, device   2, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 1).
+      IRQ 5.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
+  Bus  0, device   3, function  0:
+    Class 0c03: PCI device 14e4:4717 (rev 1).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
+  Bus  0, device   4, function  0:
+    Class 0c03: PCI device 14e4:4716 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
+  Bus  0, device   5, function  0:
+    Class 0b30: PCI device 14e4:0816 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
+  Bus  0, device   6, function  0:
+    Class 0500: PCI device 14e4:080f (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
+      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
+      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
+      Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff].