[u-boot/omap]: use a single package to build MLO/u-boot for all omap boards

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38626 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 27 insertions, 426 deletions

diff --git a/package/boot/uboot-omap4/Makefile b/package/boot/uboot-omap/Makefile
index d0830cfb85..356be5183e 100644
--- a/package/boot/uboot-omap4/Makefile
+++ b/package/boot/uboot-omap/Makefile
@@ -6,18 +6,17 @@
 #
 
 include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=u-boot
-PKG_VERSION:=2011.12
+PKG_VERSION:=2013.10
 PKG_RELEASE:=1
 
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:= \
 	http://mirror2.openwrt.org/sources \
 	ftp://ftp.denx.de/pub/u-boot
-PKG_MD5SUM:=7f29b9f6da44d6e46e988e7561fd1d5f
+PKG_MD5SUM:=a076a044b64371edc52f7e562b13f6b2
 PKG_TARGETS:=bin
 
 include $(INCLUDE_DIR)/package.mk
@@ -32,7 +31,19 @@ define uboot/omap4_panda
   TITLE:=U-Boot for the Pandaboard
 endef
 
-UBOOTS:=omap4_panda
+define uboot/am335x_evm
+  TITLE:=U-Boot for the AM335x EVM
+endef
+
+define uboot/omap3_overo
+  TITLE:=U-Boot for the Gumstix Overo
+endef
+
+define uboot/omap3_beagle
+  TITLE:=U-Boot for the BeagleBoard
+endef
+
+UBOOTS:=omap4_panda am335x_evm omap3_overo omap3_beagle
 
 define Package/uboot/template
 define Package/uboot-omap4-$(1)
@@ -45,25 +56,18 @@ define Package/uboot-omap4-$(1)
 endef
 endef
 
-define BuildUbootPackage
+define BuildUBootPackage
 	$(eval $(uboot/Default))
 	$(eval $(uboot/$(1)))
 	$(call Package/uboot/template,$(1),$(TITLE))
 endef
 
-
 ifdef BUILD_VARIANT
 $(eval $(call uboot/$(BUILD_VARIANT)))
 UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
-UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin)
+UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.img)
 endif
 
-define Build/Prepare
-	$(call Build/Prepare/Default)
-#	$(CP) ./files/* $(PKG_BUILD_DIR)
-	find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
-endef
-
 define Build/Configure
 	$(MAKE) -C $(PKG_BUILD_DIR) \
 		$(UBOOT_CONFIG)_config
@@ -74,19 +78,23 @@ define Build/Compile
 		CROSS_COMPILE=$(TARGET_CROSS)
 endef
 
+define Package/uboot/install/default
+	$(INSTALL_DIR) $(BIN_DIR)/uboot-$(BOARD)-$(1)
+	$(CP) $(PKG_BUILD_DIR)/u-boot.img $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-u-boot.img
+	$(CP) $(PKG_BUILD_DIR)/MLO $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-MLO
+endef
+
 define Package/uboot/install/template
 define Package/uboot-omap4-$(1)/install
-	$(INSTALL_DIR) $$(1)
-	$(CP) $(PKG_BUILD_DIR)/MLO $(BIN_DIR)/MLO-$(BOARD)
-	$(CP) $(PKG_BUILD_DIR)/u-boot.img $(BIN_DIR)/$(2)
+	$(call Package/uboot/install/default,$(2))
 endef
 endef
 
 $(foreach u,$(UBOOTS), \
-	$(eval $(call Package/uboot/install/template,$(u),openwrt-$(BOARD)-$(u)-u-boot.img)) \
+	$(eval $(call Package/uboot/install/template,$(u),$(u))) \
 )
 
 $(foreach u,$(UBOOTS), \
-	$(eval $(call BuildUbootPackage,$(u))) \
+	$(eval $(call BuildUBootPackage,$(u))) \
 	$(eval $(call BuildPackage,uboot-omap4-$(u))) \
 )
diff --git a/package/boot/uboot-omap35xx/Makefile b/package/boot/uboot-omap35xx/Makefile
deleted file mode 100644
index bb8a951537..0000000000
--- a/package/boot/uboot-omap35xx/Makefile
+++ /dev/null
@@ -1,91 +0,0 @@
-#
-# Copyright (C) 2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=u-boot
-PKG_VERSION:=2010.12
-PKG_RELEASE:=1
-
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_SOURCE_URL:= \
-	http://mirror2.openwrt.org/sources \
-	ftp://ftp.denx.de/pub/u-boot
-PKG_MD5SUM:=
-PKG_TARGETS:=bin
-
-include $(INCLUDE_DIR)/package.mk
-
-define uboot/Default
-  TITLE:=
-  CONFIG:=
-  IMAGE:=
-endef
-
-define uboot/omap3_overo
-  TITLE:=U-boot for the gumstix board
-endef
-
-UBOOTS:=omap3_overo
-
-define Package/uboot/template
-define Package/uboot-omap35xx-$(1)
-  SECTION:=boot
-  CATEGORY:=Boot Loaders
-  DEPENDS:=@TARGET_omap35xx
-  TITLE:=$(2)
-  URL:=http://www.denx.de/wiki/U-Boot
-  VARIANT:=$(1)
-endef
-endef
-
-define BuildUbootPackage
-	$(eval $(uboot/Default))
-	$(eval $(uboot/$(1)))
-	$(call Package/uboot/template,$(1),$(TITLE))
-endef
-
-
-ifdef BUILD_VARIANT
-$(eval $(call uboot/$(BUILD_VARIANT)))
-UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
-UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin)
-endif
-
-define Build/Prepare
-	$(call Build/Prepare/Default)
-	$(CP) ./files/* $(PKG_BUILD_DIR)
-	find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
-endef
-
-define Build/Configure
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		$(UBOOT_CONFIG)_config
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		CROSS_COMPILE=$(TARGET_CROSS)
-endef
-
-define Package/uboot/install/template
-define Package/uboot-omap35xx-$(1)/install
-	$(INSTALL_DIR) $$(1)
-	$(CP) $(PKG_BUILD_DIR)/u-boot.bin $(BIN_DIR)/$(2)
-endef
-endef
-
-$(foreach u,$(UBOOTS), \
-	$(eval $(call Package/uboot/install/template,$(u),openwrt-$(BOARD)-$(u)-u-boot.bin)) \
-)
-
-$(foreach u,$(UBOOTS), \
-	$(eval $(call BuildUbootPackage,$(u))) \
-	$(eval $(call BuildPackage,uboot-omap35xx-$(u))) \
-)
diff --git a/package/boot/uboot-omap35xx/files/include/configs/omap3_overo.h b/package/boot/uboot-omap35xx/files/include/configs/omap3_overo.h
deleted file mode 100644
index e1c930df5d..0000000000
--- a/package/boot/uboot-omap35xx/files/include/configs/omap3_overo.h
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- * Configuration settings for the Gumstix Overo board.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
-#define CONFIG_OMAP		1	/* in a TI OMAP core */
-#define CONFIG_OMAP34XX		1	/* which is a 34XX */
-#define CONFIG_OMAP3430		1	/* which is in a 3430 */
-#define CONFIG_OMAP3_OVERO	1	/* working with overo */
-
-#define CONFIG_SDRC	/* The chip has SDRC controller */
-
-#include <asm/arch/cpu.h>	/* get chip and board defs */
-#include <asm/arch/omap3.h>
-
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO		1
-#define CONFIG_DISPLAY_BOARDINFO	1
-
-/* Clock Defines */
-#define V_OSCK			26000000	/* Clock output from T2 */
-#define V_SCLK			(V_OSCK >> 1)
-
-#undef CONFIG_USE_IRQ		/* no support for IRQs */
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-#define CONFIG_REVISION_TAG		1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
-						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
-						/* initial data */
-
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- */
-#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CONS_INDEX		3
-#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600, \
-					115200}
-#define CONFIG_GENERIC_MMC		1
-#define CONFIG_MMC			1
-#define CONFIG_OMAP_HSMMC		1
-#define CONFIG_DOS_PARTITION		1
-
-/* DDR - I use Micron DDR */
-#define CONFIG_OMAP3_MICRON_DDR		1
-
-/* commands to include */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
-#define CONFIG_CMD_FAT		/* FAT support			*/
-#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
-
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support			*/
-#define CONFIG_CMD_NAND		/* NAND support			*/
-
-#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
-#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
-#undef CONFIG_CMD_IMI		/* iminfo			*/
-#undef CONFIG_CMD_IMLS		/* List all found images	*/
-#undef CONFIG_CMD_NFS		/* NFS support			*/
-#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
-
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_SYS_I2C_BUS		0
-#define CONFIG_SYS_I2C_BUS_SELECT	1
-#define CONFIG_I2C_MULTI_BUS		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
-
-/*
- * TWL4030
- */
-#define CONFIG_TWL4030_POWER		1
-#define CONFIG_TWL4030_LED		1
-
-/*
- * Board NAND Info.
- */
-#define CONFIG_SYS_NAND_QUIET_TEST	1
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
-#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
-							/* to access nand */
-							/* at CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT	1
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND */
-						/* devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV		"nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET	0x680000
-#define CONFIG_JFFS2_PART_SIZE		0xf980000	/* size of jffs2 */
-							/* partition */
-
-/* Environment information */
-#define CONFIG_BOOTDELAY		5
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=0x82000000\0" \
-	"console=ttyO2,115200n8\0" \
-	"mpurate=500\0" \
-	"vram=12M\0" \
-	"dvimode=1024x768MR-16@60\0" \
-	"defaultdisplay=dvi\0" \
-	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk0p2 rw\0" \
-	"mmcrootfstype=ext3 rootwait\0" \
-	"nandroot='ubi0:rootfs ubi.mtd=5 ubi.mtd=6 ubi.mtd=7'\0" \
-	"nandrootfstype=ubifs\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"mpurate=${mpurate} " \
-		"vram=${vram} " \
-		"omapfb.mode=dvi:${dvimode} " \
-		"omapfb.debug=y " \
-		"omapdss.def_disp=${defaultdisplay} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"nandargs=setenv bootargs console=${console} " \
-		"mpurate=${mpurate} " \
-		"vram=${vram} " \
-		"omapfb.mode=dvi:${dvimode} " \
-		"omapfb.debug=y " \
-		"omapdss.def_disp=${defaultdisplay} " \
-		"root=${nandroot} " \
-		"rootfstype=${nandrootfstype}\0" \
-	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source ${loadaddr}\0" \
-	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"bootm ${loadaddr}\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"run nandargs; " \
-		"nand read ${loadaddr} 280000 200000; " \
-		"bootm ${loadaddr}\0" \
-
-#define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"else " \
-			"if run loaduimage; then " \
-				"run mmcboot; " \
-			"else run nandboot; " \
-			"fi; " \
-		"fi; " \
-	"else run nandboot; fi"
-
-#define CONFIG_AUTO_COMPLETE	1
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#define CONFIG_SYS_PROMPT		"Overo # "
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16	/* max number of command */
-						/* args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
-#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
-					0x01F00000) /* 31MB */
-
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
-								/* address */
-/*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
-#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack 4 KiB */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 MiB */
-#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
-
-/* SDRAM Bank Allocation method */
-#define SDRC_R_B_C		1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
-
-#define CONFIG_SYS_FLASH_BASE		boot_flash_base
-
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
-
-#define CONFIG_ENV_IS_IN_NAND		1
-#define ONENAND_ENV_OFFSET		0x240000 /* environment starts here */
-#define SMNAND_ENV_OFFSET		0x240000 /* environment starts here */
-
-#define CONFIG_SYS_ENV_SECT_SIZE	boot_flash_sec
-#define CONFIG_ENV_OFFSET		boot_flash_off
-#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
-
-#ifndef __ASSEMBLY__
-extern unsigned int boot_flash_base;
-extern volatile unsigned int boot_flash_env_addr;
-extern unsigned int boot_flash_off;
-extern unsigned int boot_flash_sec;
-extern unsigned int boot_flash_type;
-#endif
-
-#if defined(CONFIG_CMD_NET)
-/*----------------------------------------------------------------------------
- * SMSC9211 Ethernet from SMSC9118 family
- *----------------------------------------------------------------------------
- */
-
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC911X		1
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE     0x2C000000
-
-#endif /* (CONFIG_CMD_NET) */
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-
-#endif				/* __CONFIG_H */