diff options
author | Waldemar Brodkorb <wbx@openwrt.org> | 2005-08-28 09:32:18 +0000 |
---|---|---|
committer | Waldemar Brodkorb <wbx@openwrt.org> | 2005-08-28 09:32:18 +0000 |
commit | 5c07edcdcbf8450636948b3e9f0db3f04b50de7c (patch) | |
tree | 665de813f74ace3b09b1c0d0da8b3b7637dafd8d | |
parent | d534e56e930d6425f5b0766cb703ccb35f031eed (diff) | |
download | master-187ad058-5c07edcdcbf8450636948b3e9f0db3f04b50de7c.tar.gz master-187ad058-5c07edcdcbf8450636948b3e9f0db3f04b50de7c.tar.bz2 master-187ad058-5c07edcdcbf8450636948b3e9f0db3f04b50de7c.zip |
add kernel 2.6 patch, from tuxap with changes for new kernel 2.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@1774 3c298f89-4303-0410-b956-a3cf2f4a3e73
-rw-r--r-- | target/linux/linux-2.6/patches/brcm/001-bcm47xx.patch | 22159 |
1 files changed, 22159 insertions, 0 deletions
diff --git a/target/linux/linux-2.6/patches/brcm/001-bcm47xx.patch b/target/linux/linux-2.6/patches/brcm/001-bcm47xx.patch new file mode 100644 index 0000000000..55dd89058c --- /dev/null +++ b/target/linux/linux-2.6/patches/brcm/001-bcm47xx.patch @@ -0,0 +1,22159 @@ +diff -Nur linux-2.6.12.5/arch/mips/Kconfig linux-2.6.12.5-brcm/arch/mips/Kconfig +--- linux-2.6.12.5/arch/mips/Kconfig 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/arch/mips/Kconfig 2005-08-28 11:12:20.404863104 +0200 +@@ -40,6 +40,16 @@ + Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and + Olivetti M700-10 workstations. + ++config BCM47XX ++ bool "Support for BCM47xx based boards" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++# select SYS_SUPPORTS_32BIT_KERNEL ++ select CPU_LITTLE_ENDIAN ++ help ++ Support for BCM47xx based boards ++ + config ACER_PICA_61 + bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)" + depends on MACH_JAZZ && EXPERIMENTAL +@@ -974,7 +984,7 @@ + + config CPU_LITTLE_ENDIAN + bool "Generate little endian code" +- default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA ++ default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA || BCM47XX + default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927 + help + Some MIPS machines can be configured for either little or big endian +diff -Nur linux-2.6.12.5/arch/mips/Kconfig.orig linux-2.6.12.5-brcm/arch/mips/Kconfig.orig +--- linux-2.6.12.5/arch/mips/Kconfig.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/Kconfig.orig 2005-08-15 02:20:18.000000000 +0200 +@@ -0,0 +1,1662 @@ ++config MIPS ++ bool ++ default y ++ # Horrible source of confusion. Die, die, die ... ++ select EMBEDDED ++ ++config MIPS64 ++ bool "64-bit kernel" ++ help ++ Select this option if you want to build a 64-bit kernel. You should ++ only select this option if you have hardware that actually has a ++ 64-bit processor and if your application will actually benefit from ++ 64-bit processing, otherwise say N. You must say Y for kernels for ++ SGI IP27 (Origin 200 and 2000) and SGI IP32 (O2). If in doubt say N. ++ ++config 64BIT ++ def_bool MIPS64 ++ ++config MIPS32 ++ bool ++ depends on MIPS64 = 'n' ++ default y ++ ++mainmenu "Linux/MIPS Kernel Configuration" ++ ++source "init/Kconfig" ++ ++menu "Machine selection" ++ ++config MACH_JAZZ ++ bool "Support for the Jazz family of machines" ++ select ARC ++ select ARC32 ++ select GENERIC_ISA_DMA ++ select I8259 ++ select ISA ++ help ++ This a family of machines based on the MIPS R4030 chipset which was ++ used by several vendors to build RISC/os and Windows NT workstations. ++ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and ++ Olivetti M700-10 workstations. ++ ++config ACER_PICA_61 ++ bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)" ++ depends on MACH_JAZZ && EXPERIMENTAL ++ select DMA_NONCOHERENT ++ help ++ This is a machine with a R4400 133/150 MHz CPU. To compile a Linux ++ kernel that runs on these, say Y here. For details about Linux on ++ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at ++ <http://www.linux-mips.org/>. ++ ++config MIPS_MAGNUM_4000 ++ bool "Support for MIPS Magnum 4000" ++ depends on MACH_JAZZ ++ select DMA_NONCOHERENT ++ help ++ This is a machine with a R4000 100 MHz CPU. To compile a Linux ++ kernel that runs on these, say Y here. For details about Linux on ++ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at ++ <http://www.linux-mips.org/>. ++ ++config OLIVETTI_M700 ++ bool "Support for Olivetti M700-10" ++ depends on MACH_JAZZ ++ select DMA_NONCOHERENT ++ help ++ This is a machine with a R4000 100 MHz CPU. To compile a Linux ++ kernel that runs on these, say Y here. For details about Linux on ++ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at ++ <http://www.linux-mips.org/>. ++ ++config MACH_VR41XX ++ bool "Support for NEC VR41XX-based machines" ++ ++config NEC_CMBVR4133 ++ bool "Support for NEC CMB-VR4133" ++ depends on MACH_VR41XX ++ select CPU_VR41XX ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select HW_HAS_PCI ++ select PCI_VR41XX ++ ++config ROCKHOPPER ++ bool "Support for Rockhopper baseboard" ++ depends on NEC_CMBVR4133 ++ select I8259 ++ select HAVE_STD_PC_SERIAL_PORT ++ ++config CASIO_E55 ++ bool "Support for CASIO CASSIOPEIA E-10/15/55/65" ++ depends on MACH_VR41XX ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select ISA ++ ++config IBM_WORKPAD ++ bool "Support for IBM WorkPad z50" ++ depends on MACH_VR41XX ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select ISA ++ ++config TANBAC_TB0226 ++ bool "Support for TANBAC TB0226 (Mbase)" ++ depends on MACH_VR41XX ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ help ++ The TANBAC TB0226 (Mbase) is a MIPS-based platform manufactured by TANBAC. ++ Please refer to <http://www.tanbac.co.jp/> about Mbase. ++ ++config TANBAC_TB0229 ++ bool "Support for TANBAC TB0229 (VR4131DIMM)" ++ depends on MACH_VR41XX ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ help ++ The TANBAC TB0229 (VR4131DIMM) is a MIPS-based platform manufactured by TANBAC. ++ Please refer to <http://www.tanbac.co.jp/> about VR4131DIMM. ++ ++config VICTOR_MPC30X ++ bool "Support for Victor MP-C303/304" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ depends on MACH_VR41XX ++ ++config ZAO_CAPCELLA ++ bool "Support for ZAO Networks Capcella" ++ depends on MACH_VR41XX ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ ++config PCI_VR41XX ++ bool "Add PCI control unit support of NEC VR4100 series" ++ depends on MACH_VR41XX && PCI ++ ++config VRC4171 ++ tristate "Add NEC VRC4171 companion chip support" ++ depends on MACH_VR41XX && ISA ++ ---help--- ++ The NEC VRC4171/4171A is a companion chip for NEC VR4111/VR4121. ++ ++config VRC4173 ++ tristate "Add NEC VRC4173 companion chip support" ++ depends on MACH_VR41XX && PCI_VR41XX ++ ---help--- ++ The NEC VRC4173 is a companion chip for NEC VR4122/VR4131. ++ ++config TOSHIBA_JMR3927 ++ bool "Support for Toshiba JMR-TX3927 board" ++ depends on MIPS32 ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select SWAP_IO_SPACE ++ ++config MIPS_COBALT ++ bool "Support for Cobalt Server (EXPERIMENTAL)" ++ depends on EXPERIMENTAL ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select I8259 ++ select IRQ_CPU ++ ++config MACH_DECSTATION ++ bool "Support for DECstations" ++ select BOOT_ELF32 ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ depends on MIPS32 || EXPERIMENTAL ++ ---help--- ++ This enables support for DEC's MIPS based workstations. For details ++ see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the ++ DECstation porting pages on <http://decstation.unix-ag.org/>. ++ ++ If you have one of the following DECstation Models you definitely ++ want to choose R4xx0 for the CPU Type: ++ ++ DECstation 5000/50 ++ DECstation 5000/150 ++ DECstation 5000/260 ++ DECsystem 5900/260 ++ ++ otherwise choose R3000. ++ ++config MIPS_EV64120 ++ bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)" ++ depends on EXPERIMENTAL ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select MIPS_GT64120 ++ help ++ This is an evaluation board based on the Galileo GT-64120 ++ single-chip system controller that contains a MIPS R5000 compatible ++ core running at 75/100MHz. Their website is located at ++ <http://www.marvell.com/>. Say Y here if you wish to build a ++ kernel for this platform. ++ ++config EVB_PCI1 ++ bool "Enable Second PCI (PCI1)" ++ depends on MIPS_EV64120 ++ ++config MIPS_EV96100 ++ bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)" ++ depends on EXPERIMENTAL ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select MIPS_GT96100 ++ select RM7000_CPU_SCACHE ++ select SWAP_IO_SPACE ++ help ++ This is an evaluation board based on the Galileo GT-96100 LAN/WAN ++ communications controllers containing a MIPS R5000 compatible core ++ running at 83MHz. Their website is <http://www.marvell.com/>. Say Y ++ here if you wish to build a kernel for this platform. ++ ++config MIPS_IVR ++ bool "Support for Globespan IVR board" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ help ++ This is an evaluation board built by Globespan to showcase thir ++ iVR (Internet Video Recorder) design. It utilizes a QED RM5231 ++ R5000 MIPS core. More information can be found out their website ++ located at <http://www.globespan.net/>. Say Y here if you wish to ++ build a kernel for this platform. ++ ++config LASAT ++ bool "Support for LASAT Networks platforms" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select MIPS_GT64120 ++ select R5000_CPU_SCACHE ++ ++config PICVUE ++ tristate "PICVUE LCD display driver" ++ depends on LASAT ++ ++config PICVUE_PROC ++ tristate "PICVUE LCD display driver /proc interface" ++ depends on PICVUE ++ ++config DS1603 ++ bool "DS1603 RTC driver" ++ depends on LASAT ++ ++config LASAT_SYSCTL ++ bool "LASAT sysctl interface" ++ depends on LASAT ++ ++config MIPS_ITE8172 ++ bool "Support for ITE 8172G board" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ help ++ Ths is an evaluation board made by ITE <http://www.ite.com.tw/> ++ with ATX form factor that utilizes a MIPS R5000 to work with its ++ ITE8172G companion internet appliance chip. The MIPS core can be ++ either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build ++ a kernel for this platform. ++ ++config IT8172_REVC ++ bool "Support for older IT8172 (Rev C)" ++ depends on MIPS_ITE8172 ++ help ++ Say Y here to support the older, Revision C version of the Integrated ++ Technology Express, Inc. ITE8172 SBC. Vendor page at ++ <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the ++ board at <http://www.mvista.com/partners/semiconductor/ite.html>. ++ ++config MIPS_ATLAS ++ bool "Support for MIPS Atlas board" ++ select BOOT_ELF32 ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select MIPS_GT64120 ++ select SWAP_IO_SPACE ++ help ++ This enables support for the QED R5231-based MIPS Atlas evaluation ++ board. ++ ++config MIPS_MALTA ++ bool "Support for MIPS Malta board" ++ select BOOT_ELF32 ++ select HAVE_STD_PC_SERIAL_PORT ++ select DMA_NONCOHERENT ++ select GENERIC_ISA_DMA ++ select HW_HAS_PCI ++ select I8259 ++ select MIPS_GT64120 ++ select SWAP_IO_SPACE ++ help ++ This enables support for the VR5000-based MIPS Malta evaluation ++ board. ++ ++config MIPS_SEAD ++ bool "Support for MIPS SEAD board (EXPERIMENTAL)" ++ depends on EXPERIMENTAL ++ select IRQ_CPU ++ select DMA_NONCOHERENT ++ ++config MOMENCO_OCELOT ++ bool "Support for Momentum Ocelot board" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select IRQ_CPU_RM7K ++ select MIPS_GT64120 ++ select RM7000_CPU_SCACHE ++ select SWAP_IO_SPACE ++ help ++ The Ocelot is a MIPS-based Single Board Computer (SBC) made by ++ Momentum Computer <http://www.momenco.com/>. ++ ++config MOMENCO_OCELOT_G ++ bool "Support for Momentum Ocelot-G board" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select IRQ_CPU_RM7K ++ select PCI_MARVELL ++ select RM7000_CPU_SCACHE ++ select SWAP_IO_SPACE ++ help ++ The Ocelot is a MIPS-based Single Board Computer (SBC) made by ++ Momentum Computer <http://www.momenco.com/>. ++ ++config MOMENCO_OCELOT_C ++ bool "Support for Momentum Ocelot-C board" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select IRQ_MV64340 ++ select PCI_MARVELL ++ select RM7000_CPU_SCACHE ++ select SWAP_IO_SPACE ++ help ++ The Ocelot is a MIPS-based Single Board Computer (SBC) made by ++ Momentum Computer <http://www.momenco.com/>. ++ ++config MOMENCO_OCELOT_3 ++ bool "Support for Momentum Ocelot-3 board" ++ select BOOT_ELF32 ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select IRQ_CPU_RM7K ++ select IRQ_MV64340 ++ select PCI_MARVELL ++ select RM7000_CPU_SCACHE ++ select SWAP_IO_SPACE ++ help ++ The Ocelot-3 is based off Discovery III System Controller and ++ PMC-Sierra Rm79000 core. ++ ++config MOMENCO_JAGUAR_ATX ++ bool "Support for Momentum Jaguar board" ++ select BOOT_ELF32 ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select IRQ_CPU_RM7K ++ select IRQ_MV64340 ++ select LIMITED_DMA ++ select PCI_MARVELL ++ select RM7000_CPU_SCACHE ++ select SWAP_IO_SPACE ++ help ++ The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by ++ Momentum Computer <http://www.momenco.com/>. ++ ++config JAGUAR_DMALOW ++ bool "Low DMA Mode" ++ depends on MOMENCO_JAGUAR_ATX ++ help ++ Select to Y if jump JP5 is set on your board, N otherwise. Normally ++ the jumper is set, so if you feel unsafe, just say Y. ++ ++config PMC_YOSEMITE ++ bool "Support for PMC-Sierra Yosemite eval board" ++ select DMA_COHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select IRQ_CPU_RM7K ++ select IRQ_CPU_RM9K ++ select SWAP_IO_SPACE ++ help ++ Yosemite is an evaluation board for the RM9000x2 processor ++ manufactured by PMC-Sierra ++ ++config HYPERTRANSPORT ++ bool "Hypertransport Support for PMC-Sierra Yosemite" ++ depends on PMC_YOSEMITE ++ ++config DDB5074 ++ bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)" ++ depends on EXPERIMENTAL ++ select DMA_NONCOHERENT ++ select HAVE_STD_PC_SERIAL_PORT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select I8259 ++ select ISA ++ help ++ This enables support for the VR5000-based NEC DDB Vrc-5074 ++ evaluation board. ++ ++config DDB5476 ++ bool "Support for NEC DDB Vrc-5476" ++ select DMA_NONCOHERENT ++ select HAVE_STD_PC_SERIAL_PORT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select I8259 ++ select ISA ++ help ++ This enables support for the R5432-based NEC DDB Vrc-5476 ++ evaluation board. ++ ++ Features : kernel debugging, serial terminal, NFS root fs, on-board ++ ether port USB, AC97, PCI, PCI VGA card & framebuffer console, ++ IDE controller, PS2 keyboard, PS2 mouse, etc. ++ ++config DDB5477 ++ bool "Support for NEC DDB Vrc-5477" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select I8259 ++ select IRQ_CPU ++ help ++ This enables support for the R5432-based NEC DDB Vrc-5477, ++ or Rockhopper/SolutionGear boards with R5432/R5500 CPUs. ++ ++ Features : kernel debugging, serial terminal, NFS root fs, on-board ++ ether port USB, AC97, PCI, etc. ++ ++config DDB5477_BUS_FREQUENCY ++ int "bus frequency (in kHZ, 0 for auto-detect)" ++ depends on DDB5477 ++ default 0 ++ ++config NEC_OSPREY ++ bool "Support for NEC Osprey board" ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ ++config SGI_IP22 ++ bool "Support for SGI IP22 (Indy/Indigo2)" ++ select ARC ++ select ARC32 ++ select BOOT_ELF32 ++ select DMA_NONCOHERENT ++ select IP22_CPU_SCACHE ++ select IRQ_CPU ++ select SWAP_IO_SPACE ++ help ++ This are the SGI Indy, Challenge S and Indigo2, as well as certain ++ OEM variants like the Tandem CMN B006S. To compile a Linux kernel ++ that runs on these, say Y here. ++ ++config SGI_IP27 ++ bool "Support for SGI IP27 (Origin200/2000)" ++ depends on MIPS64 ++ select ARC ++ select ARC64 ++ select DMA_IP27 ++ select HW_HAS_PCI ++ select PCI_DOMAINS ++ help ++ This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics ++ workstations. To compile a Linux kernel that runs on these, say Y ++ here. ++ ++#config SGI_SN0_XXL ++# bool "IP27 XXL" ++# depends on SGI_IP27 ++# This options adds support for userspace processes upto 16TB size. ++# Normally the limit is just .5TB. ++ ++config SGI_SN0_N_MODE ++ bool "IP27 N-Mode" ++ depends on SGI_IP27 ++ help ++ The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be ++ configured in either N-Modes which allows for more nodes or M-Mode ++ which allows for more memory. Your system is most probably ++ running in M-Mode, so you should say N here. ++ ++config DISCONTIGMEM ++ bool ++ default y if SGI_IP27 ++ help ++ Say Y to upport efficient handling of discontiguous physical memory, ++ for architectures which are either NUMA (Non-Uniform Memory Access) ++ or have huge holes in the physical address space for other reasons. ++ See <file:Documentation/vm/numa> for more. ++ ++config NUMA ++ bool "NUMA Support" ++ depends on SGI_IP27 ++ help ++ Say Y to compile the kernel to support NUMA (Non-Uniform Memory ++ Access). This option is for configuring high-end multiprocessor ++ server machines. If in doubt, say N. ++ ++config MAPPED_KERNEL ++ bool "Mapped kernel support" ++ depends on SGI_IP27 ++ help ++ Change the way a Linux kernel is loaded into memory on a MIPS64 ++ machine. This is required in order to support text replication and ++ NUMA. If you need to understand it, read the source code. ++ ++config REPLICATE_KTEXT ++ bool "Kernel text replication support" ++ depends on SGI_IP27 ++ help ++ Say Y here to enable replicating the kernel text across multiple ++ nodes in a NUMA cluster. This trades memory for speed. ++ ++config REPLICATE_EXHANDLERS ++ bool "Exception handler replication support" ++ depends on SGI_IP27 ++ help ++ Say Y here to enable replicating the kernel exception handlers ++ across multiple nodes in a NUMA cluster. This trades memory for ++ speed. ++ ++config SGI_IP32 ++ bool "Support for SGI IP32 (O2) (EXPERIMENTAL)" ++ depends on MIPS64 && EXPERIMENTAL ++ select ARC ++ select ARC32 ++ select BOOT_ELF32 ++ select OWN_DMA ++ select DMA_IP32 ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select R5000_CPU_SCACHE ++ select RM7000_CPU_SCACHE ++ help ++ If you want this kernel to run on SGI O2 workstation, say Y here. ++ ++config SOC_AU1X00 ++ depends on MIPS32 ++ bool "Support for AMD/Alchemy Au1X00 SOCs" ++ ++choice ++ prompt "Au1X00 SOC Type" ++ depends on SOC_AU1X00 ++ help ++ Say Y here to enable support for one of three AMD/Alchemy ++ SOCs. For additional documentation see www.amd.com. ++ ++config SOC_AU1000 ++ bool "SOC_AU1000" ++config SOC_AU1100 ++ bool "SOC_AU1100" ++config SOC_AU1500 ++ bool "SOC_AU1500" ++config SOC_AU1550 ++ bool "SOC_AU1550" ++ ++endchoice ++ ++choice ++ prompt "AMD/Alchemy Au1x00 board support" ++ depends on SOC_AU1X00 ++ help ++ These are evaluation boards built by AMD/Alchemy to ++ showcase their Au1X00 Internet Edge Processors. The SOC design ++ is based on the MIPS32 architecture running at 266/400/500MHz ++ with many integrated peripherals. Further information can be ++ found at their website, <http://www.amd.com/>. Say Y here if you ++ wish to build a kernel for this platform. ++ ++config MIPS_PB1000 ++ bool "PB1000 board" ++ depends on SOC_AU1000 ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select SWAP_IO_SPACE ++ ++config MIPS_PB1100 ++ bool "PB1100 board" ++ depends on SOC_AU1100 ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select SWAP_IO_SPACE ++ ++config MIPS_PB1500 ++ bool "PB1500 board" ++ depends on SOC_AU1500 ++ select DMA_COHERENT ++ select HW_HAS_PCI ++ ++config MIPS_PB1550 ++ bool "PB1550 board" ++ depends on SOC_AU1550 ++ select DMA_COHERENT ++ select HW_HAS_PCI ++ select MIPS_DISABLE_OBSOLETE_IDE ++ ++config MIPS_DB1000 ++ bool "DB1000 board" ++ depends on SOC_AU1000 ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ ++config MIPS_DB1100 ++ bool "DB1100 board" ++ depends on SOC_AU1100 ++ select DMA_NONCOHERENT ++ ++config MIPS_DB1500 ++ bool "DB1500 board" ++ depends on SOC_AU1500 ++ select DMA_COHERENT ++ select HW_HAS_PCI ++ select MIPS_DISABLE_OBSOLETE_IDE ++ ++config MIPS_DB1550 ++ bool "DB1550 board" ++ depends on SOC_AU1550 ++ select HW_HAS_PCI ++ select DMA_COHERENT ++ select MIPS_DISABLE_OBSOLETE_IDE ++ ++config MIPS_BOSPORUS ++ bool "Bosporus board" ++ depends on SOC_AU1500 ++ select DMA_NONCOHERENT ++ ++config MIPS_MIRAGE ++ bool "Mirage board" ++ depends on SOC_AU1500 ++ select DMA_NONCOHERENT ++ ++config MIPS_XXS1500 ++ bool "MyCable XXS1500 board" ++ depends on SOC_AU1500 ++ select DMA_NONCOHERENT ++ ++config MIPS_MTX1 ++ bool "4G Systems MTX-1 board" ++ depends on SOC_AU1500 ++ select HW_HAS_PCI ++ select DMA_NONCOHERENT ++ ++endchoice ++ ++config SIBYTE_SB1xxx_SOC ++ bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)" ++ depends on EXPERIMENTAL ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select SWAP_IO_SPACE ++ ++choice ++ prompt "BCM1xxx SOC-based board" ++ depends on SIBYTE_SB1xxx_SOC ++ default SIBYTE_SWARM ++ help ++ Enable support for boards based on the SiByte line of SOCs ++ from Broadcom. There are configurations for the known ++ evaluation boards, or you can choose "Other" and add your ++ own board support code. ++ ++config SIBYTE_SWARM ++ bool "BCM91250A-SWARM" ++ select SIBYTE_SB1250 ++ ++config SIBYTE_SENTOSA ++ bool "BCM91250E-Sentosa" ++ select SIBYTE_SB1250 ++ ++config SIBYTE_RHONE ++ bool "BCM91125E-Rhone" ++ select SIBYTE_BCM1125H ++ ++config SIBYTE_CARMEL ++ bool "BCM91120x-Carmel" ++ select SIBYTE_BCM1120 ++ ++config SIBYTE_PTSWARM ++ bool "BCM91250PT-PTSWARM" ++ select SIBYTE_SB1250 ++ ++config SIBYTE_LITTLESUR ++ bool "BCM91250C2-LittleSur" ++ select SIBYTE_SB1250 ++ ++config SIBYTE_CRHINE ++ bool "BCM91120C-CRhine" ++ select SIBYTE_BCM1120 ++ ++config SIBYTE_CRHONE ++ bool "BCM91125C-CRhone" ++ select SIBYTE_BCM1125 ++ ++config SIBYTE_UNKNOWN ++ bool "Other" ++ ++endchoice ++ ++config SIBYTE_BOARD ++ bool ++ depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN ++ default y ++ ++choice ++ prompt "BCM1xxx SOC Type" ++ depends on SIBYTE_UNKNOWN ++ default SIBYTE_UNK_BCM1250 ++ help ++ Since you haven't chosen a known evaluation board from ++ Broadcom, you must explicitly pick the SOC this kernel is ++ targetted for. ++ ++config SIBYTE_UNK_BCM1250 ++ bool "BCM1250" ++ select SIBYTE_SB1250 ++ ++config SIBYTE_UNK_BCM1120 ++ bool "BCM1120" ++ select SIBYTE_BCM1120 ++ ++config SIBYTE_UNK_BCM1125 ++ bool "BCM1125" ++ select SIBYTE_BCM1125 ++ ++config SIBYTE_UNK_BCM1125H ++ bool "BCM1125H" ++ select SIBYTE_BCM1125H ++ ++endchoice ++ ++config SIBYTE_SB1250 ++ bool ++ select HW_HAS_PCI ++ ++config SIBYTE_BCM1120 ++ bool ++ select SIBYTE_BCM112X ++ ++config SIBYTE_BCM1125 ++ bool ++ select HW_HAS_PCI ++ select SIBYTE_BCM112X ++ ++config SIBYTE_BCM1125H ++ bool ++ select HW_HAS_PCI ++ select SIBYTE_BCM112X ++ ++config SIBYTE_BCM112X ++ bool ++ ++choice ++ prompt "SiByte SOC Stepping" ++ depends on SIBYTE_SB1xxx_SOC ++ ++config CPU_SB1_PASS_1 ++ bool "1250 Pass1" ++ depends on SIBYTE_SB1250 ++ select CPU_HAS_PREFETCH ++ ++config CPU_SB1_PASS_2_1250 ++ bool "1250 An" ++ depends on SIBYTE_SB1250 ++ select CPU_SB1_PASS_2 ++ help ++ Also called BCM1250 Pass 2 ++ ++config CPU_SB1_PASS_2_2 ++ bool "1250 Bn" ++ depends on SIBYTE_SB1250 ++ select CPU_HAS_PREFETCH ++ help ++ Also called BCM1250 Pass 2.2 ++ ++config CPU_SB1_PASS_4 ++ bool "1250 Cn" ++ depends on SIBYTE_SB1250 ++ select CPU_HAS_PREFETCH ++ help ++ Also called BCM1250 Pass 3 ++ ++config CPU_SB1_PASS_2_112x ++ bool "112x Hybrid" ++ depends on SIBYTE_BCM112X ++ select CPU_SB1_PASS_2 ++ ++config CPU_SB1_PASS_3 ++ bool "112x An" ++ depends on SIBYTE_BCM112X ++ select CPU_HAS_PREFETCH ++ ++endchoice ++ ++config CPU_SB1_PASS_2 ++ bool ++ ++config SIBYTE_HAS_LDT ++ bool ++ depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H) ++ default y ++ ++config SIMULATION ++ bool "Running under simulation" ++ depends on SIBYTE_SB1xxx_SOC ++ help ++ Build a kernel suitable for running under the GDB simulator. ++ Primarily adjusts the kernel's notion of time. ++ ++config SIBYTE_CFE ++ bool "Booting from CFE" ++ depends on SIBYTE_SB1xxx_SOC ++ help ++ Make use of the CFE API for enumerating available memory, ++ controlling secondary CPUs, and possibly console output. ++ ++config SIBYTE_CFE_CONSOLE ++ bool "Use firmware console" ++ depends on SIBYTE_CFE ++ help ++ Use the CFE API's console write routines during boot. Other console ++ options (VT console, sb1250 duart console, etc.) should not be ++ configured. ++ ++config SIBYTE_STANDALONE ++ bool ++ depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE ++ default y ++ ++config SIBYTE_STANDALONE_RAM_SIZE ++ int "Memory size (in megabytes)" ++ depends on SIBYTE_STANDALONE ++ default "32" ++ ++config SIBYTE_BUS_WATCHER ++ bool "Support for Bus Watcher statistics" ++ depends on SIBYTE_SB1xxx_SOC ++ help ++ Handle and keep statistics on the bus error interrupts (COR_ECC, ++ BAD_ECC, IO_BUS). ++ ++config SIBYTE_BW_TRACE ++ bool "Capture bus trace before bus error" ++ depends on SIBYTE_BUS_WATCHER ++ help ++ Run a continuous bus trace, dumping the raw data as soon as ++ a ZBbus error is detected. Cannot work if ZBbus profiling ++ is turned on, and also will interfere with JTAG-based trace ++ buffer activity. Raw buffer data is dumped to console, and ++ must be processed off-line. ++ ++config SIBYTE_SB1250_PROF ++ bool "Support for SB1/SOC profiling - SB1/SCD perf counters" ++ depends on SIBYTE_SB1xxx_SOC ++ ++config SIBYTE_TBPROF ++ bool "Support for ZBbus profiling" ++ depends on SIBYTE_SB1xxx_SOC ++ ++config SNI_RM200_PCI ++ bool "Support for SNI RM200 PCI" ++ select ARC ++ select ARC32 ++ select BOOT_ELF32 ++ select DMA_NONCOHERENT ++ select GENERIC_ISA_DMA ++ select HAVE_STD_PC_SERIAL_PORT ++ select HW_HAS_PCI ++ select I8259 ++ select ISA ++ help ++ The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens ++ Nixdorf Informationssysteme (SNI), parent company of Pyramid ++ Technology and now in turn merged with Fujitsu. Say Y here to ++ support this machine type. ++ ++config TOSHIBA_RBTX4927 ++ bool "Support for Toshiba TBTX49[23]7 board" ++ depends on MIPS32 ++ select DMA_NONCOHERENT ++ select HAS_TXX9_SERIAL ++ select HW_HAS_PCI ++ select I8259 ++ select ISA ++ select SWAP_IO_SPACE ++ help ++ This Toshiba board is based on the TX4927 processor. Say Y here to ++ support this machine type ++ ++config TOSHIBA_FPCIB0 ++ bool "FPCIB0 Backplane Support" ++ depends on TOSHIBA_RBTX4927 ++ ++config RWSEM_GENERIC_SPINLOCK ++ bool ++ default y ++ ++config RWSEM_XCHGADD_ALGORITHM ++ bool ++ ++config GENERIC_CALIBRATE_DELAY ++ bool ++ default y ++ ++config HAVE_DEC_LOCK ++ bool ++ default y ++ ++# ++# Select some configuration options automatically based on user selections. ++# ++config ARC ++ bool ++ depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 ++ default y ++ ++config DMA_COHERENT ++ bool ++ ++config DMA_IP27 ++ bool ++ ++config DMA_NONCOHERENT ++ bool ++ ++config EARLY_PRINTK ++ bool ++ depends on MACH_DECSTATION ++ default y ++ ++config GENERIC_ISA_DMA ++ bool ++ depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA ++ default y ++ ++config I8259 ++ bool ++ depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT ++ default y ++ ++config LIMITED_DMA ++ bool ++ select HIGHMEM ++ ++config MIPS_BONITO64 ++ bool ++ depends on MIPS_ATLAS || MIPS_MALTA ++ default y ++ ++config MIPS_MSC ++ bool ++ depends on MIPS_ATLAS || MIPS_MALTA ++ default y ++ ++config MIPS_NILE4 ++ bool ++ depends on LASAT ++ default y ++ ++config MIPS_DISABLE_OBSOLETE_IDE ++ bool ++ ++config CPU_LITTLE_ENDIAN ++ bool "Generate little endian code" ++ default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA ++ default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927 ++ help ++ Some MIPS machines can be configured for either little or big endian ++ byte order. These modes require different kernels. Say Y if your ++ machine is little endian, N if it's a big endian machine. ++ ++config IRQ_CPU ++ bool ++ ++config IRQ_CPU_RM7K ++ bool ++ ++config IRQ_MV64340 ++ bool ++ ++config DDB5XXX_COMMON ++ bool ++ depends on DDB5074 || DDB5476 || DDB5477 ++ default y ++ ++config MIPS_BOARDS_GEN ++ bool ++ depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD ++ default y ++ ++config MIPS_GT64111 ++ bool ++ depends on MIPS_COBALT ++ default y ++ ++config MIPS_GT64120 ++ bool ++ depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT ++ default y ++ ++config MIPS_TX3927 ++ bool ++ depends on TOSHIBA_JMR3927 ++ select HAS_TXX9_SERIAL ++ default y ++ ++config PCI_MARVELL ++ bool ++ ++config ITE_BOARD_GEN ++ bool ++ depends on MIPS_IVR || MIPS_ITE8172 ++ default y ++ ++config SWAP_IO_SPACE ++ bool ++ ++# ++# Unfortunately not all GT64120 systems run the chip at the same clock. ++# As the user for the clock rate and try to minimize the available options. ++# ++choice ++ prompt "Galileo Chip Clock" ++ #default SYSCLK_83 if MIPS_EV64120 ++ depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G ++ default SYSCLK_83 if MIPS_EV64120 ++ default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G ++ ++config SYSCLK_75 ++ bool "75" if MIPS_EV64120 ++ ++config SYSCLK_83 ++ bool "83.3" if MIPS_EV64120 ++ ++config SYSCLK_100 ++ bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G ++ ++endchoice ++ ++config AU1X00_USB_DEVICE ++ bool ++ depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000 ++ default n ++ ++config MIPS_GT96100 ++ bool ++ depends on MIPS_EV96100 ++ default y ++ help ++ Say Y here to support the Galileo Technology GT96100 communications ++ controller card. There is a web page at <http://www.galileot.com/>. ++ ++config IT8172_CIR ++ bool ++ depends on MIPS_ITE8172 || MIPS_IVR ++ default y ++ ++config IT8712 ++ bool ++ depends on MIPS_ITE8172 ++ default y ++ ++config BOOT_ELF32 ++ bool ++ depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI ++ default y ++ ++config MIPS_L1_CACHE_SHIFT ++ int ++ default "4" if MACH_DECSTATION ++ default "7" if SGI_IP27 ++ default "5" ++ ++config ARC32 ++ bool ++ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32 ++ default y ++ ++config FB ++ bool ++ depends on MIPS_MAGNUM_4000 || OLIVETTI_M700 ++ default y ++ ---help--- ++ The frame buffer device provides an abstraction for the graphics ++ hardware. It represents the frame buffer of some video hardware and ++ allows application software to access the graphics hardware through ++ a well-defined interface, so the software doesn't need to know ++ anything about the low-level (hardware register) stuff. ++ ++ Frame buffer devices work identically across the different ++ architectures supported by Linux and make the implementation of ++ application programs easier and more portable; at this point, an X ++ server exists which uses the frame buffer device exclusively. ++ On several non-X86 architectures, the frame buffer device is the ++ only way to use the graphics hardware. ++ ++ The device is accessed through special device nodes, usually located ++ in the /dev directory, i.e. /dev/fb*. ++ ++ You need an utility program called fbset to make full use of frame ++ buffer devices. Please read <file:Documentation/fb/framebuffer.txt> ++ and the Framebuffer-HOWTO at <http://www.tldp.org/docs.html#howto> ++ for more information. ++ ++ Say Y here and to the driver for your graphics board below if you ++ are compiling a kernel for a non-x86 architecture. ++ ++ If you are compiling for the x86 architecture, you can say Y if you ++ want to play with it, but it is not essential. Please note that ++ running graphical applications that directly touch the hardware ++ (e.g. an accelerated X server) and that are not frame buffer ++ device-aware may cause unexpected results. If unsure, say N. ++ ++config HAVE_STD_PC_SERIAL_PORT ++ bool ++ ++config VR4181 ++ bool ++ depends on NEC_OSPREY ++ default y ++ ++config ARC_CONSOLE ++ bool "ARC console support" ++ depends on SGI_IP22 || SNI_RM200_PCI ++ ++config ARC_MEMORY ++ bool ++ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32 ++ default y ++ ++config ARC_PROMLIB ++ bool ++ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32 ++ default y ++ ++config ARC64 ++ bool ++ depends on SGI_IP27 ++ default y ++ ++config BOOT_ELF64 ++ bool ++ depends on SGI_IP27 ++ default y ++ ++#config MAPPED_PCI_IO y ++# bool ++# depends on SGI_IP27 ++# default y ++ ++config QL_ISP_A64 ++ bool ++ depends on SGI_IP27 ++ default y ++ ++config TOSHIBA_BOARDS ++ bool ++ depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 ++ default y ++ ++endmenu ++ ++menu "CPU selection" ++ ++choice ++ prompt "CPU type" ++ default CPU_R4X00 ++ ++config CPU_MIPS32 ++ bool "MIPS32" ++ ++config CPU_MIPS64 ++ bool "MIPS64" ++ ++config CPU_R3000 ++ bool "R3000" ++ depends on MIPS32 ++ help ++ Please make sure to pick the right CPU type. Linux/MIPS is not ++ designed to be generic, i.e. Kernels compiled for R3000 CPUs will ++ *not* work on R4000 machines and vice versa. However, since most ++ of the supported machines have an R4000 (or similar) CPU, R4x00 ++ might be a safe bet. If the resulting kernel does not work, ++ try to recompile with R3000. ++ ++config CPU_TX39XX ++ bool "R39XX" ++ depends on MIPS32 ++ ++config CPU_VR41XX ++ bool "R41xx" ++ help ++ The options selects support for the NEC VR41xx series of processors. ++ Only choose this option if you have one of these processors as a ++ kernel built with this option will not run on any other type of ++ processor or vice versa. ++ ++config CPU_R4300 ++ bool "R4300" ++ help ++ MIPS Technologies R4300-series processors. ++ ++config CPU_R4X00 ++ bool "R4x00" ++ help ++ MIPS Technologies R4000-series processors other than 4300, including ++ the R4000, R4400, R4600, and 4700. ++ ++config CPU_TX49XX ++ bool "R49XX" ++ ++config CPU_R5000 ++ bool "R5000" ++ help ++ MIPS Technologies R5000-series processors other than the Nevada. ++ ++config CPU_R5432 ++ bool "R5432" ++ ++config CPU_R6000 ++ bool "R6000" ++ depends on MIPS32 && EXPERIMENTAL ++ help ++ MIPS Technologies R6000 and R6000A series processors. Note these ++ processors are extremly rare and the support for them is incomplete. ++ ++config CPU_NEVADA ++ bool "RM52xx" ++ help ++ QED / PMC-Sierra RM52xx-series ("Nevada") processors. ++ ++config CPU_R8000 ++ bool "R8000" ++ depends on MIPS64 && EXPERIMENTAL ++ help ++ MIPS Technologies R8000 processors. Note these processors are ++ uncommon and the support for them is incomplete. ++ ++config CPU_R10000 ++ bool "R10000" ++ help ++ MIPS Technologies R10000-series processors. ++ ++config CPU_RM7000 ++ bool "RM7000" ++ ++config CPU_RM9000 ++ bool "RM9000" ++ ++config CPU_SB1 ++ bool "SB1" ++ ++endchoice ++ ++choice ++ prompt "Kernel page size" ++ default PAGE_SIZE_4KB ++ ++config PAGE_SIZE_4KB ++ bool "4kB" ++ help ++ This option select the standard 4kB Linux page size. On some ++ R3000-family processors this is the only available page size. Using ++ 4kB page size will minimize memory consumption and is therefore ++ recommended for low memory systems. ++ ++config PAGE_SIZE_8KB ++ bool "8kB" ++ depends on EXPERIMENTAL && CPU_R8000 ++ help ++ Using 8kB page size will result in higher performance kernel at ++ the price of higher memory consumption. This option is available ++ only on the R8000 processor. Not that at the time of this writing ++ this option is still high experimental; there are also issues with ++ compatibility of user applications. ++ ++config PAGE_SIZE_16KB ++ bool "16kB" ++ depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX ++ help ++ Using 16kB page size will result in higher performance kernel at ++ the price of higher memory consumption. This option is available on ++ all non-R3000 family processor. Not that at the time of this ++ writing this option is still high experimental; there are also ++ issues with compatibility of user applications. ++ ++config PAGE_SIZE_64KB ++ bool "64kB" ++ depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX ++ help ++ Using 64kB page size will result in higher performance kernel at ++ the price of higher memory consumption. This option is available on ++ all non-R3000 family processor. Not that at the time of this ++ writing this option is still high experimental; there are also ++ issues with compatibility of user applications. ++ ++endchoice ++ ++config BOARD_SCACHE ++ bool ++ ++config IP22_CPU_SCACHE ++ bool ++ select BOARD_SCACHE ++ ++config R5000_CPU_SCACHE ++ bool ++ select BOARD_SCACHE ++ ++config RM7000_CPU_SCACHE ++ bool ++ select BOARD_SCACHE ++ ++config SIBYTE_DMA_PAGEOPS ++ bool "Use DMA to clear/copy pages" ++ depends on CPU_SB1 ++ help ++ Instead of using the CPU to zero and copy pages, use a Data Mover ++ channel. These DMA channels are otherwise unused by the standard ++ SiByte Linux port. Seems to give a small performance benefit. ++ ++config CPU_HAS_PREFETCH ++ bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2 ++ default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 ++ ++config VTAG_ICACHE ++ bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32 ++ default y if CPU_SB1 ++ ++config SB1_PASS_1_WORKAROUNDS ++ bool ++ depends on CPU_SB1_PASS_1 ++ default y ++ ++config SB1_PASS_2_WORKAROUNDS ++ bool ++ depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2) ++ default y ++ ++config SB1_PASS_2_1_WORKAROUNDS ++ bool ++ depends on CPU_SB1 && CPU_SB1_PASS_2 ++ default y ++ ++config 64BIT_PHYS_ADDR ++ bool "Support for 64-bit physical address space" ++ depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && MIPS32 ++ ++config CPU_ADVANCED ++ bool "Override CPU Options" ++ depends on MIPS32 ++ help ++ Saying yes here allows you to select support for various features ++ your CPU may or may not have. Most people should say N here. ++ ++config CPU_HAS_LLSC ++ bool "ll/sc Instructions available" if CPU_ADVANCED ++ default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX ++ help ++ MIPS R4000 series and later provide the Load Linked (ll) ++ and Store Conditional (sc) instructions. More information is ++ available at <http://www.go-ecs.com/mips/miptek1.htm>. ++ ++ Say Y here if your CPU has the ll and sc instructions. Say Y here ++ for better performance, N if you don't know. You must say Y here ++ for multiprocessor machines. ++ ++config CPU_HAS_LLDSCD ++ bool "lld/scd Instructions available" if CPU_ADVANCED ++ default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32 ++ help ++ Say Y here if your CPU has the lld and scd instructions, the 64-bit ++ equivalents of ll and sc. Say Y here for better performance, N if ++ you don't know. You must say Y here for multiprocessor machines. ++ ++config CPU_HAS_WB ++ bool "Writeback Buffer available" if CPU_ADVANCED ++ default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION ++ help ++ Say N here for slightly better performance. You must say Y here for ++ machines which require flushing of write buffers in software. Saying ++ Y is the safe option; N may result in kernel malfunction and crashes. ++ ++config CPU_HAS_SYNC ++ bool ++ depends on !CPU_R3000 ++ default y ++ ++# ++# - Highmem only makes sense for the 32-bit kernel. ++# - The current highmem code will only work properly on physically indexed ++# caches such as R3000, SB1, R7000 or those that look like they're virtually ++# indexed such as R4000/R4400 SC and MC versions or R10000. So for the ++# moment we protect the user and offer the highmem option only on machines ++# where it's known to be safe. This will not offer highmem on a few systems ++# such as MIPS32 and MIPS64 CPUs which may have virtual and physically ++# indexed CPUs but we're playing safe. ++# - We should not offer highmem for system of which we already know that they ++# don't have memory configurations that could gain from highmem support in ++# the kernel because they don't support configurations with RAM at physical ++# addresses > 0x20000000. ++# ++config HIGHMEM ++ bool "High Memory Support" ++ depends on MIPS32 && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX) ++ ++config SMP ++ bool "Multi-Processing support" ++ depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27 ++ ---help--- ++ This enables support for systems with more than one CPU. If you have ++ a system with only one CPU, like most personal computers, say N. If ++ you have a system with more than one CPU, say Y. ++ ++ If you say N here, the kernel will run on single and multiprocessor ++ machines, but will use only one CPU of a multiprocessor machine. If ++ you say Y here, the kernel will run on many, but not all, ++ singleprocessor machines. On a singleprocessor machine, the kernel ++ will run faster if you say N here. ++ ++ People using multiprocessor machines who say Y here should also say ++ Y to "Enhanced Real Time Clock Support", below. ++ ++ See also the <file:Documentation/smp.txt> and the SMP-HOWTO ++ available at <http://www.tldp.org/docs.html#howto>. ++ ++ If you don't know what to do here, say N. ++ ++config NR_CPUS ++ int "Maximum number of CPUs (2-64)" ++ range 2 64 ++ depends on SMP ++ default "64" if SGI_IP27 ++ default "2" ++ help ++ This allows you to specify the maximum number of CPUs which this ++ kernel will support. The maximum supported value is 32 for 32-bit ++ kernel and 64 for 64-bit kernels; the minimum value which makes ++ sense is 2. ++ ++ This is purely to save memory - each supported CPU adds ++ approximately eight kilobytes to the kernel image. ++ ++config PREEMPT ++ bool "Preemptible Kernel" ++ help ++ This option reduces the latency of the kernel when reacting to ++ real-time or interactive events by allowing a low priority process to ++ be preempted even if it is in kernel mode executing a system call. ++ This allows applications to run more reliably even when the system is ++ under load. ++ ++config RTC_DS1742 ++ bool "DS1742 BRAM/RTC support" ++ depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 ++ ++config MIPS_INSANE_LARGE ++ bool "Support for large 64-bit configurations" ++ depends on CPU_R10000 && MIPS64 ++ help ++ MIPS R10000 does support a 44 bit / 16TB address space as opposed to ++ previous 64-bit processors which only supported 40 bit / 1TB. If you ++ need processes of more than 1TB virtual address space, say Y here. ++ This will result in additional memory usage, so it is not ++ recommended for normal users. ++ ++config RWSEM_GENERIC_SPINLOCK ++ bool ++ default y ++ ++endmenu ++ ++menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" ++ ++config HW_HAS_PCI ++ bool ++ ++config PCI ++ bool "Support for PCI controller" ++ depends on HW_HAS_PCI ++ help ++ Find out whether you have a PCI motherboard. PCI is the name of a ++ bus system, i.e. the way the CPU talks to the other stuff inside ++ your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, ++ say Y, otherwise N. ++ ++ The PCI-HOWTO, available from ++ <http://www.tldp.org/docs.html#howto>, contains valuable ++ information about which PCI hardware does work under Linux and which ++ doesn't. ++ ++config PCI_DOMAINS ++ bool ++ depends on PCI ++ ++source "drivers/pci/Kconfig" ++ ++# ++# ISA support is now enabled via select. Too many systems still have the one ++# or other ISA chip on the board that users don't know about so don't expect ++# users to choose the right thing ... ++# ++config ISA ++ bool ++ ++config EISA ++ bool "EISA support" ++ depends on SGI_IP22 || SNI_RM200_PCI ++ select ISA ++ ---help--- ++ The Extended Industry Standard Architecture (EISA) bus was ++ developed as an open alternative to the IBM MicroChannel bus. ++ ++ The EISA bus provided some of the features of the IBM MicroChannel ++ bus while maintaining backward compatibility with cards made for ++ the older ISA bus. The EISA bus saw limited use between 1988 and ++ 1995 when it was made obsolete by the PCI bus. ++ ++ Say Y here if you are building a kernel for an EISA-based machine. ++ ++ Otherwise, say N. ++ ++source "drivers/eisa/Kconfig" ++ ++config TC ++ bool "TURBOchannel support" ++ depends on MACH_DECSTATION ++ help ++ TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS ++ processors. Documentation on writing device drivers for TurboChannel ++ is available at: ++ <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>. ++ ++#config ACCESSBUS ++# bool "Access.Bus support" ++# depends on TC ++ ++config MMU ++ bool ++ default y ++ ++config MCA ++ bool ++ ++config SBUS ++ bool ++ ++source "drivers/pcmcia/Kconfig" ++ ++source "drivers/pci/hotplug/Kconfig" ++ ++endmenu ++ ++menu "Executable file formats" ++ ++source "fs/Kconfig.binfmt" ++ ++config TRAD_SIGNALS ++ bool ++ default y if MIPS32 ++ ++config BUILD_ELF64 ++ bool "Use 64-bit ELF format for building" ++ depends on MIPS64 ++ help ++ A 64-bit kernel is usually built using the 64-bit ELF binary object ++ format as it's one that allows arbitrary 64-bit constructs. For ++ kernels that are loaded within the KSEG compatibility segments the ++ 32-bit ELF format can optionally be used resulting in a somewhat ++ smaller binary, but this option is not explicitly supported by the ++ toolchain and since binutils 2.14 it does not even work at all. ++ ++ Say Y to use the 64-bit format or N to use the 32-bit one. ++ ++ If unsure say Y. ++ ++config BINFMT_IRIX ++ bool "Include IRIX binary compatibility" ++ depends on !CPU_LITTLE_ENDIAN && MIPS32 && BROKEN ++ ++config MIPS32_COMPAT ++ bool "Kernel support for Linux/MIPS 32-bit binary compatibility" ++ depends on MIPS64 ++ help ++ Select this option if you want Linux/MIPS 32-bit binary ++ compatibility. Since all software available for Linux/MIPS is ++ currently 32-bit you should say Y here. ++ ++config COMPAT ++ bool ++ depends on MIPS32_COMPAT ++ default y ++ ++config MIPS32_O32 ++ bool "Kernel support for o32 binaries" ++ depends on MIPS32_COMPAT ++ help ++ Select this option if you want to run o32 binaries. These are pure ++ 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of ++ existing binaries are in this format. ++ ++ If unsure, say Y. ++ ++config MIPS32_N32 ++ bool "Kernel support for n32 binaries" ++ depends on MIPS32_COMPAT ++ help ++ Select this option if you want to run n32 binaries. These are ++ 64-bit binaries using 32-bit quantities for addressing and certain ++ data that would normally be 64-bit. They are used in special ++ cases. ++ ++ If unsure, say N. ++ ++config BINFMT_ELF32 ++ bool ++ default y if MIPS32_O32 || MIPS32_N32 ++ ++config PM ++ bool "Power Management support (EXPERIMENTAL)" ++ depends on EXPERIMENTAL && MACH_AU1X00 ++ ++endmenu ++ ++source "drivers/Kconfig" ++ ++source "fs/Kconfig" ++ ++source "arch/mips/Kconfig.debug" ++ ++source "security/Kconfig" ++ ++source "crypto/Kconfig" ++ ++source "lib/Kconfig" ++ ++# ++# Use the generic interrupt handling code in kernel/irq/: ++# ++config GENERIC_HARDIRQS ++ bool ++ default y ++ ++config GENERIC_IRQ_PROBE ++ bool ++ default y ++ ++config ISA_DMA_API ++ bool ++ default y +diff -Nur linux-2.6.12.5/arch/mips/Makefile linux-2.6.12.5-brcm/arch/mips/Makefile +--- linux-2.6.12.5/arch/mips/Makefile 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/arch/mips/Makefile 2005-08-28 11:12:20.406862800 +0200 +@@ -79,7 +79,7 @@ + cflags-y += -I $(TOPDIR)/include/asm/gcc + cflags-y += -G 0 -mno-abicalls -fno-pic -pipe + cflags-y += $(call cc-option, -finline-limit=100000) +-LDFLAGS_vmlinux += -G 0 -static -n ++LDFLAGS_vmlinux += -G 0 -static -n -nostdlib + MODFLAGS += -mlong-calls + + cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer +@@ -167,9 +167,10 @@ + $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \ + -Wa,--trap + +-cflags-$(CONFIG_CPU_MIPS32) += \ +- $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \ +- -Wa,--trap ++#cflags-$(CONFIG_CPU_MIPS32) += \ ++# $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \ ++# -Wa,--trap ++cflags-$(CONFIG_CPU_MIPS32) += -mips2 -Wa,--trap + + cflags-$(CONFIG_CPU_MIPS64) += \ + $(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \ +@@ -618,6 +619,14 @@ + load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000 + + # ++# Broadcom BCM47XX boards ++# ++core-$(CONFIG_BCM47XX) += arch/mips/bcm47xx/ arch/mips/bcm47xx/broadcom/ ++cflags-$(CONFIG_BCM47XX) += -Iarch/mips/bcm47xx/broadcom/include ++load-$(CONFIG_BCM47XX) := 0x80001000 ++ ++ ++# + # SNI RM200 PCI + # + core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/ +@@ -715,6 +724,14 @@ + all: vmlinux.ecoff + endif + ++ifdef CONFIG_BCM47XX ++all: bzImage ++ ++zImage bzImage: vmlinux ++ $(Q)$(MAKE) -C arch/mips/bcm47xx/compressed vmlinux ++ ++endif ++ + vmlinux.ecoff vmlinux.rm200: $(vmlinux-32) + +@$(call makeboot,$@) + +@@ -729,6 +746,7 @@ + archclean: + @$(MAKE) $(clean)=arch/mips/boot + @$(MAKE) $(clean)=arch/mips/lasat ++ @$(MAKE) -C arch/mips/bcm47xx/compressed clean + + # Generate <asm/offset.h + # +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/Makefile linux-2.6.12.5-brcm/arch/mips/bcm47xx/Makefile +--- linux-2.6.12.5/arch/mips/bcm47xx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/Makefile 2005-08-28 11:12:20.406862800 +0200 +@@ -0,0 +1,6 @@ ++# ++# Makefile for the BCM47xx specific kernel interface routines ++# under Linux. ++# ++ ++obj-y := irq.o int-handler.o prom.o setup.o time.o +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/Makefile linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/Makefile +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/Makefile 2005-08-28 11:12:20.407862648 +0200 +@@ -0,0 +1,6 @@ ++# ++# Makefile for the BCM47xx specific kernel interface routines ++# under Linux. ++# ++ ++obj-y := sbutils.o linux_osl.o bcmsrom.o bcmutils.o sbmips.o sbpci.o hnddma.o +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/bcmsrom.c linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/bcmsrom.c +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/bcmsrom.c 2005-08-28 11:12:20.408862496 +0200 +@@ -0,0 +1,685 @@ ++/* ++ * Misc useful routines to access NIC SROM ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#include <typedefs.h> ++#include <osl.h> ++#include <bcmutils.h> ++#include <bcmsrom.h> ++#include <bcmdevs.h> ++#include <bcmendian.h> ++#include <sbpcmcia.h> ++#include <pcicfg.h> ++ ++#include <proto/ethernet.h> /* for sprom content groking */ ++ ++#define VARS_MAX 4096 /* should be reduced */ ++ ++static int initvars_srom_pci(void *curmap, char **vars, int *count); ++static int initvars_cis_pcmcia(void *osh, char **vars, int *count); ++static int sprom_cmd_pcmcia(void *osh, uint8 cmd); ++static int sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data); ++static int sprom_write_pcmcia(void *osh, uint16 addr, uint16 data); ++static int sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc); ++ ++/* ++ * Initialize the vars from the right source for this platform. ++ * Return 0 on success, nonzero on error. ++ */ ++int ++srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count) ++{ ++ if (vars == NULL) ++ return (0); ++ ++ switch (bus) { ++ case SB_BUS: ++ /* These two could be asserts ... */ ++ *vars = NULL; ++ *count = 0; ++ return(0); ++ ++ case PCI_BUS: ++ ASSERT(curmap); /* can not be NULL */ ++ return(initvars_srom_pci(curmap, vars, count)); ++ ++ case PCMCIA_BUS: ++ return(initvars_cis_pcmcia(osh, vars, count)); ++ ++ ++ default: ++ ASSERT(0); ++ } ++ return (-1); ++} ++ ++ ++/* support only 16-bit word read from srom */ ++int ++srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf) ++{ ++ void *srom; ++ uint i, off, nw; ++ ++ /* check input - 16-bit access only */ ++ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) ++ return 1; ++ ++ if (bus == PCI_BUS) { ++ if (!curmap) ++ return 1; ++ srom = (void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET); ++ if (sprom_read_pci(srom, byteoff, buf, nbytes, FALSE)) ++ return 1; ++ } else if (bus == PCMCIA_BUS) { ++ off = byteoff / 2; ++ nw = nbytes / 2; ++ for (i = 0; i < nw; i++) { ++ if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i))) ++ return 1; ++ } ++ } else { ++ return 1; ++ } ++ ++ return 0; ++} ++ ++/* support only 16-bit word write into srom */ ++int ++srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf) ++{ ++ uint16 *srom; ++ uint i, off, nw, crc_range; ++ uint16 image[SPROM_SIZE], *p; ++ uint8 crc; ++ volatile uint32 val32; ++ ++ /* check input - 16-bit access only */ ++ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) ++ return 1; ++ ++ crc_range = ((bus == PCMCIA_BUS) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2; ++ ++ /* if changes made inside crc cover range */ ++ if (byteoff < crc_range) { ++ nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2; ++ /* read data including entire first 64 words from srom */ ++ if (srom_read(bus, curmap, osh, 0, nw * 2, image)) ++ return 1; ++ /* make changes */ ++ bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes); ++ /* calculate crc */ ++ htol16_buf(image, crc_range); ++ crc = ~crc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE); ++ ltoh16_buf(image, crc_range); ++ image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff); ++ p = image; ++ off = 0; ++ } else { ++ p = buf; ++ off = byteoff / 2; ++ nw = nbytes / 2; ++ } ++ ++ if (bus == PCI_BUS) { ++ srom = (uint16*)((uint)curmap + PCI_BAR0_SPROM_OFFSET); ++ /* enable writes to the SPROM */ ++ val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32)); ++ val32 |= SPROM_WRITEEN; ++ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32); ++ bcm_mdelay(500); ++ /* write srom */ ++ for (i = 0; i < nw; i++) { ++ W_REG(&srom[off + i], p[i]); ++ bcm_mdelay(20); ++ } ++ /* disable writes to the SPROM */ ++ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN); ++ } else if (bus == PCMCIA_BUS) { ++ /* enable writes to the SPROM */ ++ if (sprom_cmd_pcmcia(osh, SROM_WEN)) ++ return 1; ++ bcm_mdelay(500); ++ /* write srom */ ++ for (i = 0; i < nw; i++) { ++ sprom_write_pcmcia(osh, (uint16)(off + i), p[i]); ++ bcm_mdelay(20); ++ } ++ /* disable writes to the SPROM */ ++ if (sprom_cmd_pcmcia(osh, SROM_WDS)) ++ return 1; ++ } else { ++ return 1; ++ } ++ ++ bcm_mdelay(500); ++ return 0; ++} ++ ++ ++int ++srom_parsecis(uint8 *cis, char **vars, int *count) ++{ ++ char eabuf[32]; ++ char *vp, *base; ++ uint8 tup, tlen, sromrev = 1; ++ int i, j; ++ uint varsize; ++ bool ag_init = FALSE; ++ uint16 w; ++ ++ ASSERT(vars); ++ ASSERT(count); ++ ++ base = vp = MALLOC(VARS_MAX); ++ ASSERT(vp); ++ ++ i = 0; ++ do { ++ tup = cis[i++]; ++ tlen = cis[i++]; ++ ++ switch (tup) { ++ case CISTPL_MANFID: ++ vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]); ++ vp++; ++ vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]); ++ vp++; ++ break; ++ ++ case CISTPL_FUNCE: ++ if (cis[i] == LAN_NID) { ++ ASSERT(cis[i + 1] == ETHER_ADDR_LEN); ++ bcm_ether_ntoa((uchar*)&cis[i + 2], eabuf); ++ vp += sprintf(vp, "il0macaddr=%s", eabuf); ++ vp++; ++ } ++ break; ++ ++ case CISTPL_CFTABLE: ++ vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]); ++ vp++; ++ break; ++ ++ case CISTPL_BRCM_HNBU: ++ switch (cis[i]) { ++ case HNBU_CHIPID: ++ vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + cis[i + 1]); ++ vp++; ++ vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) + cis[i + 3]); ++ vp++; ++ if (tlen == 7) { ++ vp += sprintf(vp, "chiprev=%d", (cis[i + 6] << 8) + cis[i + 5]); ++ vp++; ++ } ++ break; ++ ++ case HNBU_BOARDREV: ++ vp += sprintf(vp, "boardrev=%d", cis[i + 1]); ++ vp++; ++ break; ++ ++ case HNBU_AA: ++ vp += sprintf(vp, "aa0=%d", cis[i + 1]); ++ vp++; ++ break; ++ ++ case HNBU_AG: ++ vp += sprintf(vp, "ag0=%d", cis[i + 1]); ++ vp++; ++ ag_init = TRUE; ++ break; ++ ++ case HNBU_CC: ++ vp += sprintf(vp, "cc=%d", cis[i + 1]); ++ vp++; ++ break; ++ ++ case HNBU_PAPARMS: ++ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + tlen - 1]); ++ vp++; ++ if (tlen == 9) { ++ /* New version */ ++ for (j = 0; j < 3; j++) { ++ vp += sprintf(vp, "pa0b%d=%d", j, ++ (cis[i + (j * 2) + 2] << 8) + cis[i + (j * 2) + 1]); ++ vp++; ++ } ++ vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]); ++ vp++; ++ } ++ break; ++ ++ case HNBU_OEM: ++ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", ++ cis[i + 1], cis[i + 2], cis[i + 3], cis[i + 4], ++ cis[i + 5], cis[i + 6], cis[i + 7], cis[i + 8]); ++ vp++; ++ break; ++ case HNBU_BOARDFLAGS: ++ w = (cis[i + 2] << 8) + cis[i + 1]; ++ if (w == 0xffff) w = 0; ++ vp += sprintf(vp, "boardflags=%d", w); ++ vp++; ++ break; ++ case HNBU_LED: ++ if (cis[i + 1] != 0xff) { ++ vp += sprintf(vp, "wl0gpio0=%d", cis[i + 1]); ++ vp++; ++ } ++ if (cis[i + 2] != 0xff) { ++ vp += sprintf(vp, "wl0gpio1=%d", cis[i + 2]); ++ vp++; ++ } ++ if (cis[i + 3] != 0xff) { ++ vp += sprintf(vp, "wl0gpio2=%d", cis[i + 3]); ++ vp++; ++ } ++ if (cis[i + 4] != 0xff) { ++ vp += sprintf(vp, "wl0gpio3=%d", cis[i + 4]); ++ vp++; ++ } ++ break; ++ } ++ break; ++ ++ } ++ i += tlen; ++ } while (tup != 0xff); ++ ++ /* Set the srom version */ ++ vp += sprintf(vp, "sromrev=%d", sromrev); ++ vp++; ++ ++ /* For now just set boardflags2 to zero */ ++ vp += sprintf(vp, "boardflags2=0"); ++ vp++; ++ ++ /* if there is no antenna gain field, set default */ ++ if (ag_init == FALSE) { ++ vp += sprintf(vp, "ag0=%d", 0xff); ++ vp++; ++ } ++ ++ /* final nullbyte terminator */ ++ *vp++ = '\0'; ++ varsize = (uint)vp - (uint)base; ++ ++ ASSERT(varsize < VARS_MAX); ++ ++ if (varsize == VARS_MAX) { ++ *vars = base; ++ } else { ++ vp = MALLOC(varsize); ++ ASSERT(vp); ++ bcopy(base, vp, varsize); ++ MFREE(base, VARS_MAX); ++ *vars = vp; ++ } ++ *count = varsize; ++ ++ return (0); ++} ++ ++ ++/* set PCMCIA sprom command register */ ++static int ++sprom_cmd_pcmcia(void *osh, uint8 cmd) ++{ ++ uint8 status; ++ uint wait_cnt = 1000; ++ ++ /* write sprom command register */ ++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1); ++ ++ /* wait status */ ++ while (wait_cnt--) { ++ OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1); ++ if (status & SROM_DONE) ++ return 0; ++ } ++ return 1; ++} ++ ++/* read a word from the PCMCIA srom */ ++static int ++sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data) ++{ ++ uint8 addr_l, addr_h, data_l, data_h; ++ ++ addr_l = (uint8)((addr * 2) & 0xff); ++ addr_h = (uint8)(((addr * 2) >> 8) & 0xff); ++ ++ /* set address */ ++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); ++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); ++ ++ /* do read */ ++ if (sprom_cmd_pcmcia(osh, SROM_READ)) ++ return 1; ++ ++ /* read data */ ++ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1); ++ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1); ++ ++ *data = (data_h << 8) | data_l; ++ return 0; ++} ++ ++/* write a word to the PCMCIA srom */ ++static int ++sprom_write_pcmcia(void *osh, uint16 addr, uint16 data) ++{ ++ uint8 addr_l, addr_h, data_l, data_h; ++ ++ addr_l = (uint8)((addr * 2) & 0xff); ++ addr_h = (uint8)(((addr * 2) >> 8) & 0xff); ++ data_l = (uint8)(data & 0xff); ++ data_h = (uint8)((data >> 8) & 0xff); ++ ++ /* set address */ ++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); ++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); ++ ++ /* write data */ ++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1); ++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1); ++ ++ /* do write */ ++ return sprom_cmd_pcmcia(osh, SROM_WRITE); ++} ++ ++/* ++ * Read in and validate sprom. ++ * Return 0 on success, nonzero on error. ++ */ ++static int ++sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc) ++{ ++ int off, nw; ++ uint8 chk8; ++ int i; ++ ++ off = byteoff / 2; ++ nw = ROUNDUP(nbytes, 2) / 2; ++ ++ /* read the sprom */ ++ for (i = 0; i < nw; i++) ++ buf[i] = R_REG(&sprom[off + i]); ++ ++ if (check_crc) { ++ /* fixup the endianness so crc8 will pass */ ++ htol16_buf(buf, nw * 2); ++ if ((chk8 = crc8((uchar*)buf, nbytes, CRC8_INIT_VALUE)) != CRC8_GOOD_VALUE) ++ return (1); ++ /* now correct the endianness of the byte array */ ++ ltoh16_buf(buf, nw * 2); ++ } ++ ++ return (0); ++} ++ ++/* ++ * Initialize nonvolatile variable table from sprom. ++ * Return 0 on success, nonzero on error. ++ */ ++ ++static int ++initvars_srom_pci(void *curmap, char **vars, int *count) ++{ ++ uint16 w, b[64]; ++ uint8 sromrev; ++ struct ether_addr ea; ++ char eabuf[32]; ++ int c, woff, i; ++ char *vp, *base; ++ ++ if (sprom_read_pci((void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof (b), TRUE)) ++ return (-1); ++ ++ /* top word of sprom contains version and crc8 */ ++ sromrev = b[63] & 0xff; ++ if ((sromrev != 1) && (sromrev != 2)) { ++ return (-2); ++ } ++ ++ ASSERT(vars); ++ ASSERT(count); ++ ++ base = vp = MALLOC(VARS_MAX); ++ ASSERT(vp); ++ ++ vp += sprintf(vp, "sromrev=%d", sromrev); ++ vp++; ++ ++ if (sromrev >= 2) { ++ /* New section takes over the 4th hardware function space */ ++ ++ /* Word 28 is boardflags2 */ ++ vp += sprintf(vp, "boardflags2=%d", b[28]); ++ vp++; ++ ++ /* Word 29 is max power 11a high/low */ ++ w = b[29]; ++ vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff); ++ vp++; ++ vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff); ++ vp++; ++ ++ /* Words 30-32 set the 11alow pa settings, ++ * 33-35 are the 11ahigh ones. ++ */ ++ for (i = 0; i < 3; i++) { ++ vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]); ++ vp++; ++ vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]); ++ vp++; ++ } ++ w = b[59]; ++ if (w == 0) ++ vp += sprintf(vp, "ccode="); ++ else ++ vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff)); ++ vp++; ++ ++ } ++ ++ /* parameter section of sprom starts at byte offset 72 */ ++ woff = 72/2; ++ ++ /* first 6 bytes are il0macaddr */ ++ ea.octet[0] = (b[woff] >> 8) & 0xff; ++ ea.octet[1] = b[woff] & 0xff; ++ ea.octet[2] = (b[woff+1] >> 8) & 0xff; ++ ea.octet[3] = b[woff+1] & 0xff; ++ ea.octet[4] = (b[woff+2] >> 8) & 0xff; ++ ea.octet[5] = b[woff+2] & 0xff; ++ woff += ETHER_ADDR_LEN/2 ; ++ bcm_ether_ntoa((uchar*)&ea, eabuf); ++ vp += sprintf(vp, "il0macaddr=%s", eabuf); ++ vp++; ++ ++ /* next 6 bytes are et0macaddr */ ++ ea.octet[0] = (b[woff] >> 8) & 0xff; ++ ea.octet[1] = b[woff] & 0xff; ++ ea.octet[2] = (b[woff+1] >> 8) & 0xff; ++ ea.octet[3] = b[woff+1] & 0xff; ++ ea.octet[4] = (b[woff+2] >> 8) & 0xff; ++ ea.octet[5] = b[woff+2] & 0xff; ++ woff += ETHER_ADDR_LEN/2 ; ++ bcm_ether_ntoa((uchar*)&ea, eabuf); ++ vp += sprintf(vp, "et0macaddr=%s", eabuf); ++ vp++; ++ ++ /* next 6 bytes are et1macaddr */ ++ ea.octet[0] = (b[woff] >> 8) & 0xff; ++ ea.octet[1] = b[woff] & 0xff; ++ ea.octet[2] = (b[woff+1] >> 8) & 0xff; ++ ea.octet[3] = b[woff+1] & 0xff; ++ ea.octet[4] = (b[woff+2] >> 8) & 0xff; ++ ea.octet[5] = b[woff+2] & 0xff; ++ woff += ETHER_ADDR_LEN/2 ; ++ bcm_ether_ntoa((uchar*)&ea, eabuf); ++ vp += sprintf(vp, "et1macaddr=%s", eabuf); ++ vp++; ++ ++ /* ++ * Enet phy settings one or two singles or a dual ++ * Bits 4-0 : MII address for enet0 (0x1f for not there) ++ * Bits 9-5 : MII address for enet1 (0x1f for not there) ++ * Bit 14 : Mdio for enet0 ++ * Bit 15 : Mdio for enet1 ++ */ ++ w = b[woff]; ++ vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f)); ++ vp++; ++ vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f)); ++ vp++; ++ vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1)); ++ vp++; ++ vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1)); ++ vp++; ++ ++ /* Word 46 has board rev, antennas 0/1 & Country code/control */ ++ w = b[46]; ++ vp += sprintf(vp, "boardrev=%d", w & 0xff); ++ vp++; ++ ++ if (sromrev > 1) ++ vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf); ++ else ++ vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf); ++ vp++; ++ ++ vp += sprintf(vp, "aa0=%d", (w >> 12) & 0x3); ++ vp++; ++ ++ vp += sprintf(vp, "aa1=%d", (w >> 14) & 0x3); ++ vp++; ++ ++ /* Words 47-49 set the (wl) pa settings */ ++ woff = 47; ++ ++ for (i = 0; i < 3; i++) { ++ vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]); ++ vp++; ++ vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]); ++ vp++; ++ } ++ ++ /* ++ * Words 50-51 set the customer-configured wl led behavior. ++ * 8 bits/gpio pin. High bit: activehi=0, activelo=1; ++ * LED behavior values defined in wlioctl.h . ++ */ ++ w = b[50]; ++ if ((w != 0) && (w != 0xffff)) { ++ /* gpio0 */ ++ vp += sprintf(vp, "wl0gpio0=%d", (w & 0xff)); ++ vp++; ++ ++ /* gpio1 */ ++ vp += sprintf(vp, "wl0gpio1=%d", (w >> 8) & 0xff); ++ vp++; ++ } ++ w = b[51]; ++ if ((w != 0) && (w != 0xffff)) { ++ /* gpio2 */ ++ vp += sprintf(vp, "wl0gpio2=%d", w & 0xff); ++ vp++; ++ ++ /* gpio3 */ ++ vp += sprintf(vp, "wl0gpio3=%d", (w >> 8) & 0xff); ++ vp++; ++ } ++ ++ /* Word 52 is max power 0/1 */ ++ w = b[52]; ++ vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff); ++ vp++; ++ vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff); ++ vp++; ++ ++ /* Word 56 is idle tssi target 0/1 */ ++ w = b[56]; ++ vp += sprintf(vp, "pa0itssit=%d", w & 0xff); ++ vp++; ++ vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff); ++ vp++; ++ ++ /* Word 57 is boardflags, if not programmed make it zero */ ++ w = b[57]; ++ if (w == 0xffff) w = 0; ++ vp += sprintf(vp, "boardflags=%d", w); ++ vp++; ++ ++ /* Word 58 is antenna gain 0/1 */ ++ w = b[58]; ++ vp += sprintf(vp, "ag0=%d", w & 0xff); ++ vp++; ++ ++ vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff); ++ vp++; ++ ++ if (sromrev == 1) { ++ /* set the oem string */ ++ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", ++ ((b[59] >> 8) & 0xff), (b[59] & 0xff), ++ ((b[60] >> 8) & 0xff), (b[60] & 0xff), ++ ((b[61] >> 8) & 0xff), (b[61] & 0xff), ++ ((b[62] >> 8) & 0xff), (b[62] & 0xff)); ++ vp++; ++ } ++ ++ /* final nullbyte terminator */ ++ *vp++ = '\0'; ++ ++ c = vp - base; ++ ASSERT(c <= VARS_MAX); ++ ++ if (c == VARS_MAX) { ++ *vars = base; ++ } else { ++ vp = MALLOC(c); ++ ASSERT(vp); ++ bcopy(base, vp, c); ++ MFREE(base, VARS_MAX); ++ *vars = vp; ++ } ++ *count = c; ++ ++ return (0); ++} ++ ++/* ++ * Read the cis and call parsecis to initialize the vars. ++ * Return 0 on success, nonzero on error. ++ */ ++static int ++initvars_cis_pcmcia(void *osh, char **vars, int *count) ++{ ++ uint8 *cis = NULL; ++ int rc; ++ ++ if ((cis = MALLOC(CIS_SIZE)) == NULL) ++ return (-1); ++ ++ OSL_PCMCIA_READ_ATTR(osh, 0, cis, CIS_SIZE); ++ ++ rc = srom_parsecis(cis, vars, count); ++ ++ MFREE(cis, CIS_SIZE); ++ ++ return (rc); ++} ++ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/bcmutils.c linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/bcmutils.c +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/bcmutils.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/bcmutils.c 2005-08-28 11:12:20.428859456 +0200 +@@ -0,0 +1,691 @@ ++/* ++ * Misc useful OS-independent routines. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#include <typedefs.h> ++#include <osl.h> ++#include <bcmutils.h> ++#include <bcmendian.h> ++#include <bcmnvram.h> ++ ++unsigned char bcm_ctype[] = { ++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */ ++ _BCM_C,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C,_BCM_C, /* 8-15 */ ++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 16-23 */ ++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 24-31 */ ++ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 32-39 */ ++ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 40-47 */ ++ _BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D, /* 48-55 */ ++ _BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 56-63 */ ++ _BCM_P,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U, /* 64-71 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 72-79 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 80-87 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 88-95 */ ++ _BCM_P,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L, /* 96-103 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */ ++ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */ ++ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */ ++ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 160-175 */ ++ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 176-191 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 192-207 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_L, /* 208-223 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 224-239 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L /* 240-255 */ ++}; ++ ++uchar ++bcm_toupper(uchar c) ++{ ++ if (bcm_islower(c)) ++ c -= 'a'-'A'; ++ return (c); ++} ++ ++ulong ++bcm_strtoul(char *cp, char **endp, uint base) ++{ ++ ulong result, value; ++ bool minus; ++ ++ minus = FALSE; ++ ++ while (bcm_isspace(*cp)) ++ cp++; ++ ++ if (cp[0] == '+') ++ cp++; ++ else if (cp[0] == '-') { ++ minus = TRUE; ++ cp++; ++ } ++ ++ if (base == 0) { ++ if (cp[0] == '0') { ++ if ((cp[1] == 'x') || (cp[1] == 'X')) { ++ base = 16; ++ cp = &cp[2]; ++ } else { ++ base = 8; ++ cp = &cp[1]; ++ } ++ } else ++ base = 10; ++ } else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) { ++ cp = &cp[2]; ++ } ++ ++ result = 0; ++ ++ while (bcm_isxdigit(*cp) && ++ (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) { ++ result = result*base + value; ++ cp++; ++ } ++ ++ if (minus) ++ result = (ulong)(result * -1); ++ ++ if (endp) ++ *endp = (char *)cp; ++ ++ return (result); ++} ++ ++uint ++bcm_atoi(char *s) ++{ ++ uint n; ++ ++ n = 0; ++ ++ while (bcm_isdigit(*s)) ++ n = (n * 10) + *s++ - '0'; ++ return (n); ++} ++ ++void ++deadbeef(char *p, uint len) ++{ ++ static uchar meat[] = { 0xde, 0xad, 0xbe, 0xef }; ++ ++ while (len-- > 0) { ++ *p = meat[((uint)p) & 3]; ++ p++; ++ } ++} ++ ++/* pretty hex print a contiguous buffer */ ++void ++prhex(char *msg, uchar *buf, uint nbytes) ++{ ++ char line[256]; ++ char* p; ++ uint i; ++ ++ if (msg && (msg[0] != '\0')) ++ printf("%s: ", msg); ++ ++ p = line; ++ for (i = 0; i < nbytes; i++) { ++ if (i % 16 == 0) { ++ p += sprintf(p, "%04d: ", i); /* line prefix */ ++ } ++ p += sprintf(p, "%02x ", buf[i]); ++ if (i % 16 == 15) { ++ printf("%s\n", line); /* flush line */ ++ p = line; ++ } ++ } ++ ++ /* flush last partial line */ ++ if (p != line) ++ printf("%s\n", line); ++} ++ ++/* pretty hex print a pkt buffer chain */ ++void ++prpkt(char *msg, void *drv, void *p0) ++{ ++ void *p; ++ ++ if (msg && (msg[0] != '\0')) ++ printf("%s: ", msg); ++ ++ for (p = p0; p; p = PKTNEXT(drv, p)) ++ prhex(NULL, PKTDATA(drv, p), PKTLEN(drv, p)); ++} ++ ++/* copy a pkt buffer chain into a buffer */ ++uint ++pktcopy(void *drv, void *p, uint offset, int len, uchar *buf) ++{ ++ uint n, ret = 0; ++ ++ if (len < 0) ++ len = 4096; /* "infinite" */ ++ ++ /* skip 'offset' bytes */ ++ for (; p && offset; p = PKTNEXT(drv, p)) { ++ if (offset < (uint)PKTLEN(drv, p)) ++ break; ++ offset -= PKTLEN(drv, p); ++ } ++ ++ if (!p) ++ return 0; ++ ++ /* copy the data */ ++ for (; p && len; p = PKTNEXT(drv, p)) { ++ n = MIN((uint)PKTLEN(drv, p) - offset, (uint)len); ++ bcopy(PKTDATA(drv, p) + offset, buf, n); ++ buf += n; ++ len -= n; ++ ret += n; ++ offset = 0; ++ } ++ ++ return ret; ++} ++ ++/* return total length of buffer chain */ ++uint ++pkttotlen(void *drv, void *p) ++{ ++ uint total; ++ ++ total = 0; ++ for (; p; p = PKTNEXT(drv, p)) ++ total += PKTLEN(drv, p); ++ return (total); ++} ++ ++ ++uchar* ++bcm_ether_ntoa(char *ea, char *buf) ++{ ++ sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x", ++ (uchar)ea[0]&0xff, (uchar)ea[1]&0xff, (uchar)ea[2]&0xff, ++ (uchar)ea[3]&0xff, (uchar)ea[4]&0xff, (uchar)ea[5]&0xff); ++ return (buf); ++} ++ ++/* parse a xx:xx:xx:xx:xx:xx format ethernet address */ ++int ++bcm_ether_atoe(char *p, char *ea) ++{ ++ int i = 0; ++ ++ for (;;) { ++ ea[i++] = (char) bcm_strtoul(p, &p, 16); ++ if (!*p++ || i == 6) ++ break; ++ } ++ ++ return (i == 6); ++} ++ ++/* ++ * Traverse a string of 1-byte tag/1-byte length/variable-length value ++ * triples, returning a pointer to the substring whose first element ++ * matches tag. Stop parsing when we see an element whose ID is greater ++ * than the target key. ++ */ ++bcm_tlv_t * ++bcm_parse_ordered_tlvs(void *buf, int buflen, uint key) ++{ ++ bcm_tlv_t *elt; ++ int totlen; ++ ++ elt = (bcm_tlv_t*)buf; ++ totlen = buflen; ++ ++ /* find tagged parameter */ ++ while (totlen >= 2) { ++ uint id = elt->id; ++ int len = elt->len; ++ ++ /* Punt if we start seeing IDs > than target key */ ++ if (id > key) ++ return(NULL); ++ ++ /* validate remaining totlen */ ++ if ((id == key) && (totlen >= (len + 2))) ++ return (elt); ++ ++ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2)); ++ totlen -= (len + 2); ++ } ++ return NULL; ++} ++ ++ ++/* ++ * Traverse a string of 1-byte tag/1-byte length/variable-length value ++ * triples, returning a pointer to the substring whose first element ++ * matches tag ++ */ ++bcm_tlv_t * ++bcm_parse_tlvs(void *buf, int buflen, uint key) ++{ ++ bcm_tlv_t *elt; ++ int totlen; ++ ++ elt = (bcm_tlv_t*)buf; ++ totlen = buflen; ++ ++ /* find tagged parameter */ ++ while (totlen >= 2) { ++ int len = elt->len; ++ ++ /* validate remaining totlen */ ++ if ((elt->id == key) && (totlen >= (len + 2))) ++ return (elt); ++ ++ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2)); ++ totlen -= (len + 2); ++ } ++ ++ return NULL; ++} ++ ++void ++pktqinit(struct pktq *q, int maxlen) ++{ ++ q->head = q->tail = NULL; ++ q->maxlen = maxlen; ++ q->len = 0; ++} ++ ++void ++pktenq(struct pktq *q, void *p, bool lifo) ++{ ++ ASSERT(PKTLINK(p) == NULL); ++ ++ PKTSETLINK(p, NULL); ++ ++ if (q->tail == NULL) { ++ ASSERT(q->head == NULL); ++ q->head = q->tail = p; ++ } ++ else { ++ ASSERT(q->head); ++ ASSERT(PKTLINK(q->tail) == NULL); ++ if (lifo) { ++ PKTSETLINK(p, q->head); ++ q->head = p; ++ } else { ++ PKTSETLINK(q->tail, p); ++ q->tail = p; ++ } ++ } ++ q->len++; ++} ++ ++void* ++pktdeq(struct pktq *q) ++{ ++ void *p; ++ ++ if ((p = q->head)) { ++ ASSERT(q->tail); ++ q->head = PKTLINK(p); ++ PKTSETLINK(p, NULL); ++ q->len--; ++ if (q->head == NULL) ++ q->tail = NULL; ++ } ++ else { ++ ASSERT(q->tail == NULL); ++ } ++ ++ return (p); ++} ++ ++/******************************************************************************* ++ * crc8 ++ * ++ * Computes a crc8 over the input data using the polynomial: ++ * ++ * x^8 + x^7 +x^6 + x^4 + x^2 + 1 ++ * ++ * The caller provides the initial value (either CRC8_INIT_VALUE ++ * or the previous returned value) to allow for processing of ++ * discontiguous blocks of data. When generating the CRC the ++ * caller is responsible for complementing the final return value ++ * and inserting it into the byte stream. When checking, a final ++ * return value of CRC8_GOOD_VALUE indicates a valid CRC. ++ * ++ * Reference: Dallas Semiconductor Application Note 27 ++ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", ++ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd., ++ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt ++ * ++ ******************************************************************************/ ++ ++static uint8 crc8_table[256] = { ++ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, ++ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, ++ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, ++ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, ++ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, ++ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, ++ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, ++ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, ++ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, ++ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, ++ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, ++ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, ++ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, ++ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, ++ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, ++ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, ++ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, ++ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, ++ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, ++ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, ++ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, ++ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, ++ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, ++ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, ++ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, ++ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, ++ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, ++ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, ++ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, ++ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, ++ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, ++ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F ++}; ++ ++/* ++ * Search the name=value vars for a specific one and return its value. ++ * Returns NULL if not found. ++ */ ++char* ++getvar(char *vars, char *name) ++{ ++ char *s; ++ int len; ++ ++ len = strlen(name); ++ ++ /* first look in vars[] */ ++ for (s = vars; s && *s; ) { ++ if ((bcmp(s, name, len) == 0) && (s[len] == '=')) ++ return (&s[len+1]); ++ ++ while (*s++) ++ ; ++ } ++ ++ /* then query nvram */ ++ return (nvram_get(name)); ++} ++ ++/* ++ * Search the vars for a specific one and return its value as ++ * an integer. Returns 0 if not found. ++ */ ++int ++getintvar(char *vars, char *name) ++{ ++ char *val; ++ ++ if ((val = getvar(vars, name)) == NULL) ++ return (0); ++ ++ return (bcm_strtoul(val, NULL, 0)); ++} ++ ++void ++bcm_mdelay(uint ms) ++{ ++ uint i; ++ ++ for (i = 0; i < ms; i++) { ++ OSL_DELAY(1000); ++ } ++} ++ ++#define CRC_INNER_LOOP(n, c, x) \ ++ (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff] ++ ++uint8 ++crc8( ++ uint8 *pdata, /* pointer to array of data to process */ ++ uint nbytes, /* number of input data bytes to process */ ++ uint8 crc /* either CRC8_INIT_VALUE or previous return value */ ++) ++{ ++ /* hard code the crc loop instead of using CRC_INNER_LOOP macro ++ * to avoid the undefined and unnecessary (uint8 >> 8) operation. */ ++ while (nbytes-- > 0) ++ crc = crc8_table[(crc ^ *pdata++) & 0xff]; ++ ++ return crc; ++} ++ ++/******************************************************************************* ++ * crc16 ++ * ++ * Computes a crc16 over the input data using the polynomial: ++ * ++ * x^16 + x^12 +x^5 + 1 ++ * ++ * The caller provides the initial value (either CRC16_INIT_VALUE ++ * or the previous returned value) to allow for processing of ++ * discontiguous blocks of data. When generating the CRC the ++ * caller is responsible for complementing the final return value ++ * and inserting it into the byte stream. When checking, a final ++ * return value of CRC16_GOOD_VALUE indicates a valid CRC. ++ * ++ * Reference: Dallas Semiconductor Application Note 27 ++ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", ++ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd., ++ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt ++ * ++ ******************************************************************************/ ++ ++static uint16 crc16_table[256] = { ++ 0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF, ++ 0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7, ++ 0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E, ++ 0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876, ++ 0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD, ++ 0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5, ++ 0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C, ++ 0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974, ++ 0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB, ++ 0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3, ++ 0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A, ++ 0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72, ++ 0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9, ++ 0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1, ++ 0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738, ++ 0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70, ++ 0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7, ++ 0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF, ++ 0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036, ++ 0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E, ++ 0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5, ++ 0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD, ++ 0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134, ++ 0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C, ++ 0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3, ++ 0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB, ++ 0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232, ++ 0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A, ++ 0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1, ++ 0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9, ++ 0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330, ++ 0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78 ++}; ++ ++uint16 ++crc16( ++ uint8 *pdata, /* pointer to array of data to process */ ++ uint nbytes, /* number of input data bytes to process */ ++ uint16 crc /* either CRC16_INIT_VALUE or previous return value */ ++) ++{ ++ while (nbytes-- > 0) ++ CRC_INNER_LOOP(16, crc, *pdata++); ++ return crc; ++} ++ ++static uint32 crc32_table[256] = { ++ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, ++ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, ++ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, ++ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, ++ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, ++ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, ++ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, ++ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, ++ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, ++ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, ++ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, ++ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, ++ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, ++ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, ++ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, ++ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, ++ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, ++ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, ++ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, ++ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, ++ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, ++ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, ++ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, ++ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, ++ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, ++ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, ++ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, ++ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, ++ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, ++ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, ++ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, ++ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, ++ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, ++ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, ++ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, ++ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, ++ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, ++ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, ++ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, ++ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, ++ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, ++ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, ++ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, ++ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, ++ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, ++ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, ++ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, ++ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, ++ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, ++ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, ++ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, ++ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, ++ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, ++ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, ++ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, ++ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, ++ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, ++ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, ++ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, ++ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, ++ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, ++ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, ++ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, ++ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D ++}; ++ ++uint32 ++crc32( ++ uint8 *pdata, /* pointer to array of data to process */ ++ uint nbytes, /* number of input data bytes to process */ ++ uint32 crc /* either CRC32_INIT_VALUE or previous return value */ ++) ++{ ++ uint8 *pend; ++#ifdef __mips__ ++ uint8 tmp[4]; ++ ulong *tptr = (ulong *)tmp; ++ ++ /* in case the beginning of the buffer isn't aligned */ ++ pend = (uint8 *)((uint)(pdata + 3) & 0xfffffffc); ++ nbytes -= (pend - pdata); ++ while (pdata < pend) ++ CRC_INNER_LOOP(32, crc, *pdata++); ++ ++ /* handle bulk of data as 32-bit words */ ++ pend = pdata + (nbytes & 0xfffffffc); ++ while (pdata < pend) { ++ *tptr = *((ulong *)pdata)++; ++ CRC_INNER_LOOP(32, crc, tmp[0]); ++ CRC_INNER_LOOP(32, crc, tmp[1]); ++ CRC_INNER_LOOP(32, crc, tmp[2]); ++ CRC_INNER_LOOP(32, crc, tmp[3]); ++ } ++ ++ /* 1-3 bytes at end of buffer */ ++ pend = pdata + (nbytes & 0x03); ++ while (pdata < pend) ++ CRC_INNER_LOOP(32, crc, *pdata++); ++#else ++ pend = pdata + nbytes; ++ while (pdata < pend) ++ CRC_INNER_LOOP(32, crc, *pdata++); ++#endif ++ ++ return crc; ++} ++ ++#ifdef notdef ++#define CLEN 1499 ++#define CBUFSIZ (CLEN+4) ++#define CNBUFS 5 ++ ++void testcrc32(void) ++{ ++ uint j,k,l; ++ uint8 *buf; ++ uint len[CNBUFS]; ++ uint32 crcr; ++ uint32 crc32tv[CNBUFS] = ++ {0xd2cb1faa, 0xd385c8fa, 0xf5b4f3f3, 0x55789e20, 0x00343110}; ++ ++ ASSERT((buf = MALLOC(CBUFSIZ*CNBUFS)) != NULL); ++ ++ /* step through all possible alignments */ ++ for (l=0;l<=4;l++) { ++ for (j=0; j<CNBUFS; j++) { ++ len[j] = CLEN; ++ for (k=0; k<len[j]; k++) ++ *(buf + j*CBUFSIZ + (k+l)) = (j+k) & 0xff; ++ } ++ ++ for (j=0; j<CNBUFS; j++) { ++ crcr = crc32(buf + j*CBUFSIZ + l, len[j], CRC32_INIT_VALUE); ++ ASSERT(crcr == crc32tv[j]); ++ } ++ } ++ ++ MFREE(buf, CBUFSIZ*CNBUFS); ++ return; ++} ++#endif ++ ++ ++ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/hnddma.c linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/hnddma.c +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/hnddma.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/hnddma.c 2005-08-28 11:12:20.430859152 +0200 +@@ -0,0 +1,763 @@ ++/* ++ * Generic Broadcom Home Networking Division (HND) DMA module. ++ * This supports the following chips: BCM42xx, 44xx, 47xx . ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include <typedefs.h> ++#include <osl.h> ++#include <bcmendian.h> ++#include <bcmutils.h> ++ ++struct dma_info; /* forward declaration */ ++#define di_t struct dma_info ++#include <hnddma.h> ++ ++/* debug/trace */ ++#define DMA_ERROR(args) ++#define DMA_TRACE(args) ++ ++/* default dma message level(if input msg_level pointer is null in dma_attach()) */ ++static uint dma_msg_level = 0; ++ ++#define MAXNAMEL 8 ++#define MAXDD (DMAMAXRINGSZ / sizeof (dmadd_t)) ++ ++/* dma engine software state */ ++typedef struct dma_info { ++ hnddma_t hnddma; /* exported structure */ ++ uint *msg_level; /* message level pointer */ ++ ++ char name[MAXNAMEL]; /* callers name for diag msgs */ ++ void *drv; /* driver handle */ ++ void *dev; /* device handle */ ++ dmaregs_t *regs; /* dma engine registers */ ++ ++ dmadd_t *txd; /* pointer to chip-specific tx descriptor ring */ ++ uint txin; /* index of next descriptor to reclaim */ ++ uint txout; /* index of next descriptor to post */ ++ uint txavail; /* # free tx descriptors */ ++ void *txp[MAXDD]; /* parallel array of pointers to packets */ ++ ulong txdpa; /* physical address of descriptor ring */ ++ uint txdalign; /* #bytes added to alloc'd mem to align txd */ ++ ++ dmadd_t *rxd; /* pointer to chip-specific rx descriptor ring */ ++ uint rxin; /* index of next descriptor to reclaim */ ++ uint rxout; /* index of next descriptor to post */ ++ void *rxp[MAXDD]; /* parallel array of pointers to packets */ ++ ulong rxdpa; /* physical address of descriptor ring */ ++ uint rxdalign; /* #bytes added to alloc'd mem to align rxd */ ++ ++ /* tunables */ ++ uint ntxd; /* # tx descriptors */ ++ uint nrxd; /* # rx descriptors */ ++ uint rxbufsize; /* rx buffer size in bytes */ ++ uint nrxpost; /* # rx buffers to keep posted */ ++ uint rxoffset; /* rxcontrol offset */ ++ uint ddoffset; /* add to get dma address of descriptor ring */ ++ uint dataoffset; /* add to get dma address of data buffer */ ++} dma_info_t; ++ ++/* descriptor bumping macros */ ++#define NEXTTXD(i) ((i + 1) & (di->ntxd - 1)) ++#define PREVTXD(i) ((i - 1) & (di->ntxd - 1)) ++#define NEXTRXD(i) ((i + 1) & (di->nrxd - 1)) ++#define NTXDACTIVE(h, t) ((t - h) & (di->ntxd - 1)) ++#define NRXDACTIVE(h, t) ((t - h) & (di->nrxd - 1)) ++ ++/* macros to convert between byte offsets and indexes */ ++#define B2I(bytes) ((bytes) / sizeof (dmadd_t)) ++#define I2B(index) ((index) * sizeof (dmadd_t)) ++ ++void* ++dma_attach(void *drv, void *dev, char *name, dmaregs_t *regs, uint ntxd, uint nrxd, ++ uint rxbufsize, uint nrxpost, uint rxoffset, uint ddoffset, uint dataoffset, uint *msg_level) ++{ ++ dma_info_t *di; ++ void *va; ++ ++ ASSERT(ntxd <= MAXDD); ++ ASSERT(nrxd <= MAXDD); ++ ++ /* allocate private info structure */ ++ if ((di = MALLOC(sizeof (dma_info_t))) == NULL) ++ return (NULL); ++ bzero((char*)di, sizeof (dma_info_t)); ++ ++ /* set message level */ ++ di->msg_level = msg_level ? msg_level : &dma_msg_level; ++ ++ DMA_TRACE(("%s: dma_attach: drv 0x%x dev 0x%x regs 0x%x ntxd %d nrxd %d rxbufsize %d nrxpost %d rxoffset %d ddoffset 0x%x dataoffset 0x%x\n", name, (uint)drv, (uint)dev, (uint)regs, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, ddoffset, dataoffset)); ++ ++ /* make a private copy of our callers name */ ++ strncpy(di->name, name, MAXNAMEL); ++ di->name[MAXNAMEL-1] = '\0'; ++ ++ di->drv = drv; ++ di->dev = dev; ++ di->regs = regs; ++ ++ /* allocate transmit descriptor ring */ ++ if (ntxd) { ++ if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->txdpa)) == NULL) ++ goto fail; ++ di->txd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN); ++ di->txdalign = ((uint)di->txd - (uint)va); ++ di->txdpa = di->txdpa + di->txdalign; ++ ASSERT(ISALIGNED(di->txd, DMARINGALIGN)); ++ } ++ ++ /* allocate receive descriptor ring */ ++ if (nrxd) { ++ if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->rxdpa)) == NULL) ++ goto fail; ++ di->rxd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN); ++ di->rxdalign = ((uint)di->rxd - (uint)va); ++ di->rxdpa = di->rxdpa + di->rxdalign; ++ ASSERT(ISALIGNED(di->rxd, DMARINGALIGN)); ++ } ++ ++ /* save tunables */ ++ di->ntxd = ntxd; ++ di->nrxd = nrxd; ++ di->rxbufsize = rxbufsize; ++ di->nrxpost = nrxpost; ++ di->rxoffset = rxoffset; ++ di->ddoffset = ddoffset; ++ di->dataoffset = dataoffset; ++ ++ return ((void*)di); ++ ++fail: ++ dma_detach((void*)di); ++ return (NULL); ++} ++ ++/* may be called with core in reset */ ++void ++dma_detach(dma_info_t *di) ++{ ++ if (di == NULL) ++ return; ++ ++ DMA_TRACE(("%s: dma_detach\n", di->name)); ++ ++ /* shouldn't be here if descriptors are unreclaimed */ ++ ASSERT(di->txin == di->txout); ++ ASSERT(di->rxin == di->rxout); ++ ++ /* free dma descriptor rings */ ++ if (di->txd) ++ DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->txd - di->txdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->txdpa); ++ if (di->rxd) ++ DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->rxd - di->rxdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->rxdpa); ++ ++ /* free our private info structure */ ++ MFREE((void*)di, sizeof (dma_info_t)); ++} ++ ++ ++void ++dma_txreset(dma_info_t *di) ++{ ++ uint32 status; ++ ++ DMA_TRACE(("%s: dma_txreset\n", di->name)); ++ ++ /* suspend tx DMA first */ ++ W_REG(&di->regs->xmtcontrol, XC_SE); ++ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED && ++ status != XS_XS_IDLE && ++ status != XS_XS_STOPPED, ++ 10000); ++ ++ W_REG(&di->regs->xmtcontrol, 0); ++ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED, ++ 10000); ++ ++ if (status != XS_XS_DISABLED) { ++ DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name)); ++ } ++ ++ /* wait for the last transaction to complete */ ++ OSL_DELAY(300); ++} ++ ++void ++dma_rxreset(dma_info_t *di) ++{ ++ uint32 status; ++ ++ DMA_TRACE(("%s: dma_rxreset\n", di->name)); ++ ++ W_REG(&di->regs->rcvcontrol, 0); ++ SPINWAIT((status = (R_REG(&di->regs->rcvstatus) & RS_RS_MASK)) != RS_RS_DISABLED, ++ 10000); ++ ++ if (status != RS_RS_DISABLED) { ++ DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name)); ++ } ++} ++ ++void ++dma_txinit(dma_info_t *di) ++{ ++ DMA_TRACE(("%s: dma_txinit\n", di->name)); ++ ++ di->txin = di->txout = 0; ++ di->txavail = di->ntxd - 1; ++ ++ /* clear tx descriptor ring */ ++ BZERO_SM((void*)di->txd, (di->ntxd * sizeof (dmadd_t))); ++ ++ W_REG(&di->regs->xmtcontrol, XC_XE); ++ W_REG(&di->regs->xmtaddr, (di->txdpa + di->ddoffset)); ++} ++ ++bool ++dma_txenabled(dma_info_t *di) ++{ ++ uint32 xc; ++ ++ /* If the chip is dead, it is not enabled :-) */ ++ xc = R_REG(&di->regs->xmtcontrol); ++ return ((xc != 0xffffffff) && (xc & XC_XE)); ++} ++ ++void ++dma_txsuspend(dma_info_t *di) ++{ ++ DMA_TRACE(("%s: dma_txsuspend\n", di->name)); ++ OR_REG(&di->regs->xmtcontrol, XC_SE); ++} ++ ++void ++dma_txresume(dma_info_t *di) ++{ ++ DMA_TRACE(("%s: dma_txresume\n", di->name)); ++ AND_REG(&di->regs->xmtcontrol, ~XC_SE); ++} ++ ++bool ++dma_txsuspended(dma_info_t *di) ++{ ++ uint32 xc; ++ uint32 xs; ++ ++ xc = R_REG(&di->regs->xmtcontrol); ++ if (xc & XC_SE) { ++ xs = R_REG(&di->regs->xmtstatus); ++ return ((xs & XS_XS_MASK) == XS_XS_IDLE); ++ } ++ return 0; ++} ++ ++bool ++dma_txstopped(dma_info_t *di) ++{ ++ return ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) == XS_XS_STOPPED); ++} ++ ++bool ++dma_rxstopped(dma_info_t *di) ++{ ++ return ((R_REG(&di->regs->rcvstatus) & RS_RS_MASK) == RS_RS_STOPPED); ++} ++ ++void ++dma_fifoloopbackenable(dma_info_t *di) ++{ ++ DMA_TRACE(("%s: dma_fifoloopbackenable\n", di->name)); ++ OR_REG(&di->regs->xmtcontrol, XC_LE); ++} ++ ++void ++dma_rxinit(dma_info_t *di) ++{ ++ DMA_TRACE(("%s: dma_rxinit\n", di->name)); ++ ++ di->rxin = di->rxout = 0; ++ ++ /* clear rx descriptor ring */ ++ BZERO_SM((void*)di->rxd, (di->nrxd * sizeof (dmadd_t))); ++ ++ dma_rxenable(di); ++ W_REG(&di->regs->rcvaddr, (di->rxdpa + di->ddoffset)); ++} ++ ++void ++dma_rxenable(dma_info_t *di) ++{ ++ DMA_TRACE(("%s: dma_rxenable\n", di->name)); ++ W_REG(&di->regs->rcvcontrol, ((di->rxoffset << RC_RO_SHIFT) | RC_RE)); ++} ++ ++bool ++dma_rxenabled(dma_info_t *di) ++{ ++ uint32 rc; ++ ++ rc = R_REG(&di->regs->rcvcontrol); ++ return ((rc != 0xffffffff) && (rc & RC_RE)); ++} ++ ++/* ++ * The BCM47XX family supports full 32bit dma engine buffer addressing so ++ * dma buffers can cross 4 Kbyte page boundaries. ++ */ ++int ++dma_txfast(dma_info_t *di, void *p0, uint32 coreflags) ++{ ++ void *p, *next; ++ uchar *data; ++ uint len; ++ uint txout; ++ uint32 ctrl; ++ uint32 pa; ++ ++ DMA_TRACE(("%s: dma_txfast\n", di->name)); ++ ++ txout = di->txout; ++ ctrl = 0; ++ ++ /* ++ * Walk the chain of packet buffers ++ * allocating and initializing transmit descriptor entries. ++ */ ++ for (p = p0; p; p = next) { ++ data = PKTDATA(di->drv, p); ++ len = PKTLEN(di->drv, p); ++ next = PKTNEXT(di->drv, p); ++ ++ /* return nonzero if out of tx descriptors */ ++ if (NEXTTXD(txout) == di->txin) ++ goto outoftxd; ++ ++ if (len == 0) ++ continue; ++ ++ /* get physical address of buffer start */ ++ pa = (uint32) DMA_MAP(di->dev, data, len, DMA_TX, p); ++ ++ /* build the descriptor control value */ ++ ctrl = len & CTRL_BC_MASK; ++ ++ ctrl |= coreflags; ++ ++ if (p == p0) ++ ctrl |= CTRL_SOF; ++ if (next == NULL) ++ ctrl |= (CTRL_IOC | CTRL_EOF); ++ if (txout == (di->ntxd - 1)) ++ ctrl |= CTRL_EOT; ++ ++ /* init the tx descriptor */ ++ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl)); ++ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset)); ++ ++ ASSERT(di->txp[txout] == NULL); ++ ++ txout = NEXTTXD(txout); ++ } ++ ++ /* if last txd eof not set, fix it */ ++ if (!(ctrl & CTRL_EOF)) ++ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF)); ++ ++ /* save the packet */ ++ di->txp[PREVTXD(txout)] = p0; ++ ++ /* bump the tx descriptor index */ ++ di->txout = txout; ++ ++ /* kick the chip */ ++ W_REG(&di->regs->xmtptr, I2B(txout)); ++ ++ /* tx flow control */ ++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; ++ ++ return (0); ++ ++outoftxd: ++ DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name)); ++ PKTFREE(di->drv, p0, TRUE); ++ di->txavail = 0; ++ di->hnddma.txnobuf++; ++ return (-1); ++} ++ ++#define PAGESZ 4096 ++#define PAGEBASE(x) ((uint)(x) & ~4095) ++ ++/* ++ * Just like above except go through the extra effort of splitting ++ * buffers that cross 4Kbyte boundaries into multiple tx descriptors. ++ */ ++int ++dma_tx(dma_info_t *di, void *p0, uint32 coreflags) ++{ ++ void *p, *next; ++ uchar *data; ++ uint plen, len; ++ uchar *page, *start, *end; ++ uint txout; ++ uint32 ctrl; ++ uint32 pa; ++ ++ DMA_TRACE(("%s: dma_tx\n", di->name)); ++ ++ txout = di->txout; ++ ctrl = 0; ++ ++ /* ++ * Walk the chain of packet buffers ++ * splitting those that cross 4 Kbyte boundaries ++ * allocating and initializing transmit descriptor entries. ++ */ ++ for (p = p0; p; p = next) { ++ data = PKTDATA(di->drv, p); ++ plen = PKTLEN(di->drv, p); ++ next = PKTNEXT(di->drv, p); ++ ++ if (plen == 0) ++ continue; ++ ++ for (page = (uchar*)PAGEBASE(data); ++ page <= (uchar*)PAGEBASE(data + plen - 1); ++ page += PAGESZ) { ++ ++ /* return nonzero if out of tx descriptors */ ++ if (NEXTTXD(txout) == di->txin) ++ goto outoftxd; ++ ++ start = (page == (uchar*)PAGEBASE(data))? data: page; ++ end = (page == (uchar*)PAGEBASE(data + plen))? ++ (data + plen): (page + PAGESZ); ++ len = end - start; ++ ++ /* build the descriptor control value */ ++ ctrl = len & CTRL_BC_MASK; ++ ++ ctrl |= coreflags; ++ ++ if ((p == p0) && (start == data)) ++ ctrl |= CTRL_SOF; ++ if ((next == NULL) && (end == (data + plen))) ++ ctrl |= (CTRL_IOC | CTRL_EOF); ++ if (txout == (di->ntxd - 1)) ++ ctrl |= CTRL_EOT; ++ ++ /* get physical address of buffer start */ ++ pa = (uint32) DMA_MAP(di->dev, start, len, DMA_TX, p); ++ ++ /* init the tx descriptor */ ++ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl)); ++ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset)); ++ ++ ASSERT(di->txp[txout] == NULL); ++ ++ txout = NEXTTXD(txout); ++ } ++ } ++ ++ /* if last txd eof not set, fix it */ ++ if (!(ctrl & CTRL_EOF)) ++ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF)); ++ ++ /* save the packet */ ++ di->txp[PREVTXD(txout)] = p0; ++ ++ /* bump the tx descriptor index */ ++ di->txout = txout; ++ ++ /* kick the chip */ ++ W_REG(&di->regs->xmtptr, I2B(txout)); ++ ++ /* tx flow control */ ++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; ++ ++ return (0); ++ ++outoftxd: ++ DMA_ERROR(("%s: dma_tx: out of txds\n", di->name)); ++ PKTFREE(di->drv, p0, TRUE); ++ di->txavail = 0; ++ di->hnddma.txnobuf++; ++ return (-1); ++} ++ ++/* returns a pointer to the next frame received, or NULL if there are no more */ ++void* ++dma_rx(dma_info_t *di) ++{ ++ void *p; ++ uint len; ++ int skiplen = 0; ++ ++ while ((p = dma_getnextrxp(di, FALSE))) { ++ /* skip giant packets which span multiple rx descriptors */ ++ if (skiplen > 0) { ++ skiplen -= di->rxbufsize; ++ if (skiplen < 0) ++ skiplen = 0; ++ PKTFREE(di->drv, p, FALSE); ++ continue; ++ } ++ ++ len = ltoh16(*(uint16*)(PKTDATA(di->drv, p))); ++ DMA_TRACE(("%s: dma_rx len %d\n", di->name, len)); ++ ++ /* bad frame length check */ ++ if (len > (di->rxbufsize - di->rxoffset)) { ++ DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len)); ++ if (len > 0) ++ skiplen = len - (di->rxbufsize - di->rxoffset); ++ PKTFREE(di->drv, p, FALSE); ++ di->hnddma.rxgiants++; ++ continue; ++ } ++ ++ /* set actual length */ ++ PKTSETLEN(di->drv, p, (di->rxoffset + len)); ++ ++ break; ++ } ++ ++ return (p); ++} ++ ++/* post receive buffers */ ++void ++dma_rxfill(dma_info_t *di) ++{ ++ void *p; ++ uint rxin, rxout; ++ uint ctrl; ++ uint n; ++ uint i; ++ uint32 pa; ++ uint rxbufsize; ++ ++ /* ++ * Determine how many receive buffers we're lacking ++ * from the full complement, allocate, initialize, ++ * and post them, then update the chip rx lastdscr. ++ */ ++ ++ rxin = di->rxin; ++ rxout = di->rxout; ++ rxbufsize = di->rxbufsize; ++ ++ n = di->nrxpost - NRXDACTIVE(rxin, rxout); ++ ++ DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n)); ++ ++ for (i = 0; i < n; i++) { ++ if ((p = PKTGET(di->drv, rxbufsize, FALSE)) == NULL) { ++ DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name)); ++ di->hnddma.rxnobuf++; ++ break; ++ } ++ ++ *(uint32*)(OSL_UNCACHED(PKTDATA(di->drv, p))) = 0; ++ ++ pa = (uint32) DMA_MAP(di->dev, PKTDATA(di->drv, p), rxbufsize, DMA_RX, p); ++ ASSERT(ISALIGNED(pa, 4)); ++ ++ /* save the free packet pointer */ ++ ASSERT(di->rxp[rxout] == NULL); ++ di->rxp[rxout] = p; ++ ++ /* prep the descriptor control value */ ++ ctrl = rxbufsize; ++ if (rxout == (di->nrxd - 1)) ++ ctrl |= CTRL_EOT; ++ ++ /* init the rx descriptor */ ++ W_SM(&di->rxd[rxout].ctrl, BUS_SWAP32(ctrl)); ++ W_SM(&di->rxd[rxout].addr, BUS_SWAP32(pa + di->dataoffset)); ++ ++ rxout = NEXTRXD(rxout); ++ } ++ ++ di->rxout = rxout; ++ ++ /* update the chip lastdscr pointer */ ++ W_REG(&di->regs->rcvptr, I2B(rxout)); ++} ++ ++void ++dma_txreclaim(dma_info_t *di, bool forceall) ++{ ++ void *p; ++ ++ DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : "")); ++ ++ while ((p = dma_getnexttxp(di, forceall))) ++ PKTFREE(di->drv, p, TRUE); ++} ++ ++/* ++ * Reclaim next completed txd (txds if using chained buffers) and ++ * return associated packet. ++ * If 'force' is true, reclaim txd(s) and return associated packet ++ * regardless of the value of the hardware "curr" pointer. ++ */ ++void* ++dma_getnexttxp(dma_info_t *di, bool forceall) ++{ ++ uint start, end, i; ++ void *txp; ++ ++ DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : "")); ++ ++ txp = NULL; ++ ++ start = di->txin; ++ if (forceall) ++ end = di->txout; ++ else ++ end = B2I(R_REG(&di->regs->xmtstatus) & XS_CD_MASK); ++ ++ if ((start == 0) && (end > di->txout)) ++ goto bogus; ++ ++ for (i = start; i != end && !txp; i = NEXTTXD(i)) { ++ DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->txd[i].addr)) - di->dataoffset), ++ (BUS_SWAP32(R_SM(&di->txd[i].ctrl)) & CTRL_BC_MASK), DMA_TX, di->txp[i]); ++ W_SM(&di->txd[i].addr, 0xdeadbeef); ++ txp = di->txp[i]; ++ di->txp[i] = NULL; ++ } ++ ++ di->txin = i; ++ ++ /* tx flow control */ ++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; ++ ++ return (txp); ++ ++bogus: ++/* ++ DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n", ++ start, end, di->txout, forceall)); ++*/ ++ return (NULL); ++} ++ ++void ++dma_rxreclaim(dma_info_t *di) ++{ ++ void *p; ++ ++ DMA_TRACE(("%s: dma_rxreclaim\n", di->name)); ++ ++ while ((p = dma_getnextrxp(di, TRUE))) ++ PKTFREE(di->drv, p, FALSE); ++} ++ ++void * ++dma_getnextrxp(dma_info_t *di, bool forceall) ++{ ++ uint i; ++ void *rxp; ++ ++ /* if forcing, dma engine must be disabled */ ++ ASSERT(!forceall || !dma_rxenabled(di)); ++ ++ i = di->rxin; ++ ++ /* return if no packets posted */ ++ if (i == di->rxout) ++ return (NULL); ++ ++ /* ignore curr if forceall */ ++ if (!forceall && (i == B2I(R_REG(&di->regs->rcvstatus) & RS_CD_MASK))) ++ return (NULL); ++ ++ /* get the packet pointer that corresponds to the rx descriptor */ ++ rxp = di->rxp[i]; ++ ASSERT(rxp); ++ di->rxp[i] = NULL; ++ ++ /* clear this packet from the descriptor ring */ ++ DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->rxd[i].addr)) - di->dataoffset), ++ di->rxbufsize, DMA_RX, rxp); ++ W_SM(&di->rxd[i].addr, 0xdeadbeef); ++ ++ di->rxin = NEXTRXD(i); ++ ++ return (rxp); ++} ++ ++char* ++dma_dumptx(dma_info_t *di, char *buf) ++{ ++ buf += sprintf(buf, "txd 0x%lx txdpa 0x%lx txp 0x%lx txin %d txout %d txavail %d\n", ++ (ulong)di->txd, di->txdpa, (ulong)di->txp, di->txin, di->txout, di->txavail); ++ buf += sprintf(buf, "xmtcontrol 0x%x xmtaddr 0x%x xmtptr 0x%x xmtstatus 0x%x\n", ++ R_REG(&di->regs->xmtcontrol), ++ R_REG(&di->regs->xmtaddr), ++ R_REG(&di->regs->xmtptr), ++ R_REG(&di->regs->xmtstatus)); ++ return (buf); ++} ++ ++char* ++dma_dumprx(dma_info_t *di, char *buf) ++{ ++ buf += sprintf(buf, "rxd 0x%lx rxdpa 0x%lx rxp 0x%lx rxin %d rxout %d\n", ++ (ulong)di->rxd, di->rxdpa, (ulong)di->rxp, di->rxin, di->rxout); ++ buf += sprintf(buf, "rcvcontrol 0x%x rcvaddr 0x%x rcvptr 0x%x rcvstatus 0x%x\n", ++ R_REG(&di->regs->rcvcontrol), ++ R_REG(&di->regs->rcvaddr), ++ R_REG(&di->regs->rcvptr), ++ R_REG(&di->regs->rcvstatus)); ++ return (buf); ++} ++ ++char* ++dma_dump(dma_info_t *di, char *buf) ++{ ++ buf = dma_dumptx(di, buf); ++ buf = dma_dumprx(di, buf); ++ return (buf); ++} ++ ++uint ++dma_getvar(dma_info_t *di, char *name) ++{ ++ if (!strcmp(name, "&txavail")) ++ return ((uint) &di->txavail); ++ else { ++ ASSERT(0); ++ } ++ return (0); ++} ++ ++void ++dma_txblock(dma_info_t *di) ++{ ++ di->txavail = 0; ++} ++ ++void ++dma_txunblock(dma_info_t *di) ++{ ++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; ++} ++ ++uint ++dma_txactive(dma_info_t *di) ++{ ++ return (NTXDACTIVE(di->txin, di->txout)); ++} +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcm4710.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcm4710.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcm4710.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcm4710.h 2005-08-28 11:12:20.430859152 +0200 +@@ -0,0 +1,90 @@ ++/* ++ * BCM4710 address space map and definitions ++ * Think twice before adding to this file, this is not the kitchen sink ++ * These definitions are not guaranteed for all 47xx chips, only the 4710 ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _bcm4710_h_ ++#define _bcm4710_h_ ++ ++/* Address map */ ++#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */ ++#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ ++#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ ++#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ ++#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ ++#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */ ++ ++/* Core register space */ ++#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */ ++#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */ ++#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */ ++#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */ ++#define BCM4710_REG_USB 0x18004000 /* USB core registers */ ++#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */ ++#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */ ++#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */ ++#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */ ++ ++#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */ ++#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */ ++#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */ ++#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */ ++#define BCM4710_PROG 0x1f800000 /* Programable interface */ ++#define BCM4710_FLASH 0x1fc00000 /* Flash */ ++ ++#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ ++ ++#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300) ++ ++#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000) ++#define BCM4710_LED (BCM4710_EXTIF + 0x00900000) ++ ++#define SBFLAG_PCI 0 ++#define SBFLAG_ENET0 1 ++#define SBFLAG_ILINE20 2 ++#define SBFLAG_CODEC 3 ++#define SBFLAG_USB 4 ++#define SBFLAG_EXTIF 5 ++#define SBFLAG_ENET1 6 ++ ++#ifdef CONFIG_HWSIM ++#define BCM4710_TRACE(trval) do { *((int *)0xa0000f18) = (trval); } while (0) ++#else ++#define BCM4710_TRACE(trval) ++#endif ++ ++ ++/* BCM94702 CPCI -ExtIF used for LocalBus devs */ ++ ++#define BCM94702_CPCI_RESET_ADDR BCM4710_EXTIF ++#define BCM94702_CPCI_BOARDID_ADDR (BCM4710_EXTIF | 0x4000) ++#define BCM94702_CPCI_DOC_ADDR (BCM4710_EXTIF | 0x6000) ++#define BCM94702_DOC_ADDR BCM94702_CPCI_DOC_ADDR ++#define BCM94702_CPCI_LED_ADDR (BCM4710_EXTIF | 0xc000) ++#define BCM94702_CPCI_NVRAM_ADDR (BCM4710_EXTIF | 0xe000) ++#define BCM94702_CPCI_NVRAM_SIZE 0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/ ++#define BCM94702_CPCI_TOD_REG_BASE (BCM94702_CPCI_NVRAM_ADDR | 0x1ff0) ++ ++#define LED_REG(x) \ ++ (*(volatile unsigned char *) (KSEG1ADDR(BCM94702_CPCI_LED_ADDR) + (x))) ++ ++/* ++ * Reset function implemented in PLD. Read or write should trigger hard reset ++ */ ++#define SYS_HARD_RESET() \ ++ { for (;;) \ ++ *( (volatile unsigned char *)\ ++ KSEG1ADDR(BCM94702_CPCI_RESET_ADDR) ) = 0x80; \ ++ } ++ ++#endif /* _bcm4710_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmdevs.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmdevs.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmdevs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmdevs.h 2005-08-28 11:12:20.431859000 +0200 +@@ -0,0 +1,238 @@ ++/* ++ * Broadcom device-specific manifest constants. ++ * ++ * $Id$ ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ */ ++ ++#ifndef _BCMDEVS_H ++#define _BCMDEVS_H ++ ++ ++/* Known PCI vendor Id's */ ++#define VENDOR_EPIGRAM 0xfeda ++#define VENDOR_BROADCOM 0x14e4 ++#define VENDOR_3COM 0x10b7 ++#define VENDOR_NETGEAR 0x1385 ++#define VENDOR_DIAMOND 0x1092 ++#define VENDOR_DELL 0x1028 ++#define VENDOR_HP 0x0e11 ++#define VENDOR_APPLE 0x106b ++ ++/* PCI Device Id's */ ++#define BCM4210_DEVICE_ID 0x1072 /* never used */ ++#define BCM4211_DEVICE_ID 0x4211 ++#define BCM4230_DEVICE_ID 0x1086 /* never used */ ++#define BCM4231_DEVICE_ID 0x4231 ++ ++#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */ ++#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */ ++#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */ ++#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */ ++ ++#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */ ++#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */ ++ ++#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */ ++#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */ ++ ++#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */ ++#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */ ++#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */ ++#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */ ++#define BCM47XX_USB_ID 0x4715 /* 47xx usb */ ++#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */ ++#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */ ++#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */ ++ ++#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */ ++ ++#define BCM4610_DEVICE_ID 0x4610 /* 4610 primary function 0 */ ++#define BCM4610_ILINE_ID 0x4611 /* 4610 iline100 */ ++#define BCM4610_V90_ID 0x4612 /* 4610 v90 codec */ ++#define BCM4610_ENET_ID 0x4613 /* 4610 enet */ ++#define BCM4610_EXT_ID 0x4614 /* 4610 external i/f */ ++#define BCM4610_USB_ID 0x4615 /* 4610 usb */ ++ ++#define BCM4402_DEVICE_ID 0x4402 /* 4402 primary function 0 */ ++#define BCM4402_ENET_ID 0x4402 /* 4402 enet */ ++#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */ ++ ++#define BCM4301_DEVICE_ID 0x4301 /* 4301 primary function 0 */ ++#define BCM4301_D11B_ID 0x4301 /* 4301 802.11b */ ++ ++#define BCM4307_DEVICE_ID 0x4307 /* 4307 primary function 0 */ ++#define BCM4307_V90_ID 0x4305 /* 4307 v90 codec */ ++#define BCM4307_ENET_ID 0x4306 /* 4307 enet */ ++#define BCM4307_D11B_ID 0x4307 /* 4307 802.11b */ ++ ++#define BCM4306_DEVICE_ID 0x4306 /* 4306 chipcommon chipid */ ++#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */ ++#define BCM4306_D11G_ID2 0x4325 ++#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */ ++#define BCM4306_UART_ID 0x4322 /* 4306 uart */ ++#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */ ++#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */ ++ ++#define BCM4309_PKG_ID 1 /* 4309 package id */ ++ ++#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */ ++#define BCM4303_PKG_ID 2 /* 4303 package id */ ++ ++#define BCM4310_DEVICE_ID 0x4310 /* 4310 chipcommon chipid */ ++#define BCM4310_D11B_ID 0x4311 /* 4310 802.11b */ ++#define BCM4310_UART_ID 0x4312 /* 4310 uart */ ++#define BCM4310_ENET_ID 0x4313 /* 4310 enet */ ++#define BCM4310_USB_ID 0x4315 /* 4310 usb */ ++ ++#define BCM4704_DEVICE_ID 0x4704 /* 4704 chipcommon chipid */ ++#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */ ++ ++#define BCM4317_DEVICE_ID 0x4317 /* 4317 chip common chipid */ ++ ++#define BCM4712_DEVICE_ID 0x4712 /* 4712 chipcommon chipid */ ++#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */ ++#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */ ++ ++#define SDIOH_FPGA_ID 0x4380 /* sdio host fpga */ ++ ++#define BCM5365_DEVICE_ID 0x5365 /* 5365 chipcommon chipid */ ++ ++ ++/* PCMCIA vendor Id's */ ++ ++#define VENDOR_BROADCOM_PCMCIA 0x02d0 ++ ++/* SDIO vendor Id's */ ++#define VENDOR_BROADCOM_SDIO 0x00BF ++ ++ ++/* boardflags */ ++#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */ ++#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */ ++#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */ ++#define BFL_ENETSPI 0x0010 /* This board has ephy roboswitch spi */ ++#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */ ++#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */ ++#define BFL_ENETVLAN 0x0100 /* This board can do vlan */ ++ ++/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */ ++#define BOARD_GPIO_HWRAD_B 0x010 /* bit 4 is HWRAD input on 4301 */ ++#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */ ++#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */ ++#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */ ++#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ ++#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ ++#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ ++#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ ++ ++/* Bus types */ ++#define SB_BUS 0 /* Silicon Backplane */ ++#define PCI_BUS 1 /* PCI target */ ++#define PCMCIA_BUS 2 /* PCMCIA target */ ++#define SDIO_BUS 3 /* SDIO target */ ++ ++/* Reference Board Types */ ++ ++#define BU4710_BOARD 0x0400 ++#define VSIM4710_BOARD 0x0401 ++#define QT4710_BOARD 0x0402 ++ ++#define BU4610_BOARD 0x0403 ++#define VSIM4610_BOARD 0x0404 ++ ++#define BU4307_BOARD 0x0405 ++#define BCM94301CB_BOARD 0x0406 ++#define BCM94301PC_BOARD 0x0406 /* Pcmcia 5v card */ ++#define BCM94301MP_BOARD 0x0407 ++#define BCM94307MP_BOARD 0x0408 ++#define BCMAP4307_BOARD 0x0409 ++ ++#define BU4309_BOARD 0x040a ++#define BCM94309CB_BOARD 0x040b ++#define BCM94309MP_BOARD 0x040c ++#define BCM4309AP_BOARD 0x040d ++ ++#define BCM94302MP_BOARD 0x040e ++ ++#define VSIM4310_BOARD 0x040f ++#define BU4711_BOARD 0x0410 ++#define BCM94310U_BOARD 0x0411 ++#define BCM94310AP_BOARD 0x0412 ++#define BCM94310MP_BOARD 0x0414 ++ ++#define BU4306_BOARD 0x0416 ++#define BCM94306CB_BOARD 0x0417 ++#define BCM94306MP_BOARD 0x0418 ++ ++#define BCM94710D_BOARD 0x041a ++#define BCM94710R1_BOARD 0x041b ++#define BCM94710R4_BOARD 0x041c ++#define BCM94710AP_BOARD 0x041d ++ ++ ++#define BU2050_BOARD 0x041f ++ ++ ++#define BCM94309G_BOARD 0x0421 ++ ++#define BCM94301PC3_BOARD 0x0422 /* Pcmcia 3.3v card */ ++ ++#define BU4704_BOARD 0x0423 ++#define BU4702_BOARD 0x0424 ++ ++#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */ ++ ++#define BU4317_BOARD 0x0426 ++ ++ ++#define BCM94702MN_BOARD 0x0428 ++ ++/* BCM4702 1U CompactPCI Board */ ++#define BCM94702CPCI_BOARD 0x0429 ++ ++/* BCM4702 with BCM95380 VLAN Router */ ++#define BCM95380RR_BOARD 0x042a ++ ++/* cb4306 with SiGe PA */ ++#define BCM94306CBSG_BOARD 0x042b ++ ++/* mp4301 with 2050 radio */ ++#define BCM94301MPL_BOARD 0x042c ++ ++/* cb4306 with SiGe PA */ ++#define PCSG94306_BOARD 0x042d ++ ++/* bu4704 with sdram */ ++#define BU4704SD_BOARD 0x042e ++ ++/* Dual 11a/11g Router */ ++#define BCM94704AGR_BOARD 0x042f ++ ++/* 11a-only minipci */ ++#define BCM94308MP_BOARD 0x0430 ++ ++ ++ ++/* BCM94317 boards */ ++#define BCM94317CB_BOARD 0x0440 ++#define BCM94317MP_BOARD 0x0441 ++#define BCM94317PCMCIA_BOARD 0x0442 ++#define BCM94317SDIO_BOARD 0x0443 ++ ++#define BU4712_BOARD 0x0444 ++ ++/* BCM4712 boards */ ++#define BCM94712AGR_BOARD 0x0445 ++#define BCM94712AP_BOARD 0x0446 ++ ++/* BCM4702 boards */ ++#define CT4702AP_BOARD 0x0447 ++ ++#endif /* _BCMDEVS_H */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmendian.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmendian.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmendian.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmendian.h 2005-08-28 11:12:20.431859000 +0200 +@@ -0,0 +1,125 @@ ++/******************************************************************************* ++ * $Id$ ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * local version of endian.h - byte order defines ++ ******************************************************************************/ ++ ++#ifndef _BCMENDIAN_H_ ++#define _BCMENDIAN_H_ ++ ++#include <typedefs.h> ++ ++/* Byte swap a 16 bit value */ ++#define BCMSWAP16(val) \ ++ ((uint16)( \ ++ (((uint16)(val) & (uint16)0x00ffU) << 8) | \ ++ (((uint16)(val) & (uint16)0xff00U) >> 8) )) ++ ++/* Byte swap a 32 bit value */ ++#define BCMSWAP32(val) \ ++ ((uint32)( \ ++ (((uint32)(val) & (uint32)0x000000ffUL) << 24) | \ ++ (((uint32)(val) & (uint32)0x0000ff00UL) << 8) | \ ++ (((uint32)(val) & (uint32)0x00ff0000UL) >> 8) | \ ++ (((uint32)(val) & (uint32)0xff000000UL) >> 24) )) ++ ++static INLINE uint16 ++bcmswap16(uint16 val) ++{ ++ return BCMSWAP16(val); ++} ++ ++static INLINE uint32 ++bcmswap32(uint32 val) ++{ ++ return BCMSWAP32(val); ++} ++ ++/* buf - start of buffer of shorts to swap */ ++/* len - byte length of buffer */ ++static INLINE void ++bcmswap16_buf(uint16 *buf, uint len) ++{ ++ len = len/2; ++ ++ while(len--){ ++ *buf = bcmswap16(*buf); ++ buf++; ++ } ++} ++ ++#ifndef hton16 ++#ifndef IL_BIGENDIAN ++#define HTON16(i) BCMSWAP16(i) ++#define hton16(i) bcmswap16(i) ++#define hton32(i) bcmswap32(i) ++#define ntoh16(i) bcmswap16(i) ++#define ntoh32(i) bcmswap32(i) ++#define ltoh16(i) (i) ++#define ltoh32(i) (i) ++#define htol16(i) (i) ++#define htol32(i) (i) ++#else ++#define HTON16(i) (i) ++#define hton16(i) (i) ++#define hton32(i) (i) ++#define ntoh16(i) (i) ++#define ntoh32(i) (i) ++#define ltoh16(i) bcmswap16(i) ++#define ltoh32(i) bcmswap32(i) ++#define htol16(i) bcmswap16(i) ++#define htol32(i) bcmswap32(i) ++#endif ++#endif ++ ++#ifndef IL_BIGENDIAN ++#define ltoh16_buf(buf, i) ++#define htol16_buf(buf, i) ++#else ++#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) ++#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) ++#endif ++ ++/* ++* load 16-bit value from unaligned little endian byte array. ++*/ ++static INLINE uint16 ++ltoh16_ua(uint8 *bytes) ++{ ++ return (bytes[1]<<8)+bytes[0]; ++} ++ ++/* ++* load 32-bit value from unaligned little endian byte array. ++*/ ++static INLINE uint32 ++ltoh32_ua(uint8 *bytes) ++{ ++ return (bytes[3]<<24)+(bytes[2]<<16)+(bytes[1]<<8)+bytes[0]; ++} ++ ++/* ++* load 16-bit value from unaligned big(network) endian byte array. ++*/ ++static INLINE uint16 ++ntoh16_ua(uint8 *bytes) ++{ ++ return (bytes[0]<<8)+bytes[1]; ++} ++ ++/* ++* load 32-bit value from unaligned big(network) endian byte array. ++*/ ++static INLINE uint32 ++ntoh32_ua(uint8 *bytes) ++{ ++ return (bytes[0]<<24)+(bytes[1]<<16)+(bytes[2]<<8)+bytes[3]; ++} ++ ++#endif /* _BCMENDIAN_H_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmenet47xx.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmenet47xx.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmenet47xx.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmenet47xx.h 2005-08-28 11:12:20.432858848 +0200 +@@ -0,0 +1,229 @@ ++/* ++ * Hardware-specific definitions for ++ * Broadcom BCM47XX 10/100 Mbps Ethernet cores. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _bcmenet_47xx_h_ ++#define _bcmenet_47xx_h_ ++ ++#include <bcmdevs.h> ++#include <hnddma.h> ++ ++#define BCMENET_NFILTERS 64 /* # ethernet address filter entries */ ++#define BCMENET_MCHASHBASE 0x200 /* multicast hash filter base address */ ++#define BCMENET_MCHASHSIZE 256 /* multicast hash filter size in bytes */ ++#define BCMENET_MAX_DMA 4096 /* chip has 12 bits of DMA addressing */ ++ ++/* power management event wakeup pattern constants */ ++#define BCMENET_NPMP 4 /* chip supports 4 wakeup patterns */ ++#define BCMENET_PMPBASE 0x400 /* wakeup pattern base address */ ++#define BCMENET_PMPSIZE 0x80 /* 128bytes each pattern */ ++#define BCMENET_PMMBASE 0x600 /* wakeup mask base address */ ++#define BCMENET_PMMSIZE 0x10 /* 128bits each mask */ ++ ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif /* PAD */ ++ ++/* sometimes you just need the enet mib definitions */ ++#include <bcmenetmib.h> ++ ++/* ++ * Host Interface Registers ++ */ ++typedef volatile struct _bcmenettregs { ++ /* Device and Power Control */ ++ uint32 devcontrol; ++ uint32 PAD[2]; ++ uint32 biststatus; ++ uint32 wakeuplength; ++ uint32 PAD[3]; ++ ++ /* Interrupt Control */ ++ uint32 intstatus; ++ uint32 intmask; ++ uint32 gptimer; ++ uint32 PAD[23]; ++ ++ /* Ethernet MAC Address Filtering Control */ ++ uint32 PAD[2]; ++ uint32 enetftaddr; ++ uint32 enetftdata; ++ uint32 PAD[2]; ++ ++ /* Ethernet MAC Control */ ++ uint32 emactxmaxburstlen; ++ uint32 emacrxmaxburstlen; ++ uint32 emaccontrol; ++ uint32 emacflowcontrol; ++ ++ uint32 PAD[20]; ++ ++ /* DMA Lazy Interrupt Control */ ++ uint32 intrecvlazy; ++ uint32 PAD[63]; ++ ++ /* DMA engine */ ++ dmaregs_t dmaregs; ++ dmafifo_t dmafifo; ++ uint32 PAD[116]; ++ ++ /* EMAC Registers */ ++ uint32 rxconfig; ++ uint32 rxmaxlength; ++ uint32 txmaxlength; ++ uint32 PAD; ++ uint32 mdiocontrol; ++ uint32 mdiodata; ++ uint32 emacintmask; ++ uint32 emacintstatus; ++ uint32 camdatalo; ++ uint32 camdatahi; ++ uint32 camcontrol; ++ uint32 enetcontrol; ++ uint32 txcontrol; ++ uint32 txwatermark; ++ uint32 mibcontrol; ++ uint32 PAD[49]; ++ ++ /* EMAC MIB counters */ ++ bcmenetmib_t mib; ++ ++ uint32 PAD[585]; ++ ++ /* Sonics SiliconBackplane config registers */ ++ sbconfig_t sbconfig; ++} bcmenetregs_t; ++ ++/* device control */ ++#define DC_PM ((uint32)1 << 7) /* pattern filtering enable */ ++#define DC_IP ((uint32)1 << 10) /* internal ephy present (rev >= 1) */ ++#define DC_ER ((uint32)1 << 15) /* ephy reset */ ++#define DC_MP ((uint32)1 << 16) /* mii phy mode enable */ ++#define DC_CO ((uint32)1 << 17) /* mii phy mode: enable clocks */ ++#define DC_PA_MASK 0x7c0000 /* mii phy mode: mdc/mdio phy address */ ++#define DC_PA_SHIFT 18 ++ ++/* wakeup length */ ++#define WL_P0_MASK 0x7f /* pattern 0 */ ++#define WL_D0 ((uint32)1 << 7) ++#define WL_P1_MASK 0x7f00 /* pattern 1 */ ++#define WL_P1_SHIFT 8 ++#define WL_D1 ((uint32)1 << 15) ++#define WL_P2_MASK 0x7f0000 /* pattern 2 */ ++#define WL_P2_SHIFT 16 ++#define WL_D2 ((uint32)1 << 23) ++#define WL_P3_MASK 0x7f000000 /* pattern 3 */ ++#define WL_P3_SHIFT 24 ++#define WL_D3 ((uint32)1 << 31) ++ ++/* intstatus and intmask */ ++#define I_PME ((uint32)1 << 6) /* power management event */ ++#define I_TO ((uint32)1 << 7) /* general purpose timeout */ ++#define I_PC ((uint32)1 << 10) /* descriptor error */ ++#define I_PD ((uint32)1 << 11) /* data error */ ++#define I_DE ((uint32)1 << 12) /* descriptor protocol error */ ++#define I_RU ((uint32)1 << 13) /* receive descriptor underflow */ ++#define I_RO ((uint32)1 << 14) /* receive fifo overflow */ ++#define I_XU ((uint32)1 << 15) /* transmit fifo underflow */ ++#define I_RI ((uint32)1 << 16) /* receive interrupt */ ++#define I_XI ((uint32)1 << 24) /* transmit interrupt */ ++#define I_EM ((uint32)1 << 26) /* emac interrupt */ ++#define I_MW ((uint32)1 << 27) /* mii write */ ++#define I_MR ((uint32)1 << 28) /* mii read */ ++ ++/* emaccontrol */ ++#define EMC_CG ((uint32)1 << 0) /* crc32 generation enable */ ++#define EMC_EP ((uint32)1 << 2) /* onchip ephy: powerdown (rev >= 1) */ ++#define EMC_ED ((uint32)1 << 3) /* onchip ephy: energy detected (rev >= 1) */ ++#define EMC_LC_MASK 0xe0 /* onchip ephy: led control (rev >= 1) */ ++#define EMC_LC_SHIFT 5 ++ ++/* emacflowcontrol */ ++#define EMF_RFH_MASK 0xff /* rx fifo hi water mark */ ++#define EMF_PG ((uint32)1 << 15) /* enable pause frame generation */ ++ ++/* interrupt receive lazy */ ++#define IRL_TO_MASK 0x00ffffff /* timeout */ ++#define IRL_FC_MASK 0xff000000 /* frame count */ ++#define IRL_FC_SHIFT 24 /* frame count */ ++ ++/* emac receive config */ ++#define ERC_DB ((uint32)1 << 0) /* disable broadcast */ ++#define ERC_AM ((uint32)1 << 1) /* accept all multicast */ ++#define ERC_RDT ((uint32)1 << 2) /* receive disable while transmitting */ ++#define ERC_PE ((uint32)1 << 3) /* promiscuous enable */ ++#define ERC_LE ((uint32)1 << 4) /* loopback enable */ ++#define ERC_FE ((uint32)1 << 5) /* enable flow control */ ++#define ERC_UF ((uint32)1 << 6) /* accept unicast flow control frame */ ++#define ERC_RF ((uint32)1 << 7) /* reject filter */ ++ ++/* emac mdio control */ ++#define MC_MF_MASK 0x7f /* mdc frequency */ ++#define MC_PE ((uint32)1 << 7) /* mii preamble enable */ ++ ++/* emac mdio data */ ++#define MD_DATA_MASK 0xffff /* r/w data */ ++#define MD_TA_MASK 0x30000 /* turnaround value */ ++#define MD_TA_SHIFT 16 ++#define MD_TA_VALID (2 << MD_TA_SHIFT) /* valid ta */ ++#define MD_RA_MASK 0x7c0000 /* register address */ ++#define MD_RA_SHIFT 18 ++#define MD_PMD_MASK 0xf800000 /* physical media device */ ++#define MD_PMD_SHIFT 23 ++#define MD_OP_MASK 0x30000000 /* opcode */ ++#define MD_OP_SHIFT 28 ++#define MD_OP_WRITE (1 << MD_OP_SHIFT) /* write op */ ++#define MD_OP_READ (2 << MD_OP_SHIFT) /* read op */ ++#define MD_SB_MASK 0xc0000000 /* start bits */ ++#define MD_SB_SHIFT 30 ++#define MD_SB_START (0x1 << MD_SB_SHIFT) /* start of frame */ ++ ++/* emac intstatus and intmask */ ++#define EI_MII ((uint32)1 << 0) /* mii mdio interrupt */ ++#define EI_MIB ((uint32)1 << 1) /* mib interrupt */ ++#define EI_FLOW ((uint32)1 << 2) /* flow control interrupt */ ++ ++/* emac cam data high */ ++#define CD_V ((uint32)1 << 16) /* valid bit */ ++ ++/* emac cam control */ ++#define CC_CE ((uint32)1 << 0) /* cam enable */ ++#define CC_MS ((uint32)1 << 1) /* mask select */ ++#define CC_RD ((uint32)1 << 2) /* read */ ++#define CC_WR ((uint32)1 << 3) /* write */ ++#define CC_INDEX_MASK 0x3f0000 /* index */ ++#define CC_INDEX_SHIFT 16 ++#define CC_CB ((uint32)1 << 31) /* cam busy */ ++ ++/* emac ethernet control */ ++#define EC_EE ((uint32)1 << 0) /* emac enable */ ++#define EC_ED ((uint32)1 << 1) /* emac disable */ ++#define EC_ES ((uint32)1 << 2) /* emac soft reset */ ++#define EC_EP ((uint32)1 << 3) /* external phy select */ ++ ++/* emac transmit control */ ++#define EXC_FD ((uint32)1 << 0) /* full duplex */ ++#define EXC_FM ((uint32)1 << 1) /* flowmode */ ++#define EXC_SB ((uint32)1 << 2) /* single backoff enable */ ++#define EXC_SS ((uint32)1 << 3) /* small slottime */ ++ ++/* emac mib control */ ++#define EMC_RZ ((uint32)1 << 0) /* autoclear on read */ ++ ++/* sometimes you just need the enet rxheader definitions */ ++#include <bcmenetrxh.h> ++ ++#endif /* _bcmenet_47xx_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmenetmib.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmenetmib.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmenetmib.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmenetmib.h 2005-08-28 11:12:20.432858848 +0200 +@@ -0,0 +1,81 @@ ++/* ++ * Hardware-specific MIB definition for ++ * Broadcom Home Networking Division ++ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _bcmenetmib_h_ ++#define _bcmenetmib_h_ ++ ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif /* PAD */ ++ ++/* ++ * EMAC MIB Registers ++ */ ++typedef volatile struct { ++ uint32 tx_good_octets; ++ uint32 tx_good_pkts; ++ uint32 tx_octets; ++ uint32 tx_pkts; ++ uint32 tx_broadcast_pkts; ++ uint32 tx_multicast_pkts; ++ uint32 tx_len_64; ++ uint32 tx_len_65_to_127; ++ uint32 tx_len_128_to_255; ++ uint32 tx_len_256_to_511; ++ uint32 tx_len_512_to_1023; ++ uint32 tx_len_1024_to_max; ++ uint32 tx_jabber_pkts; ++ uint32 tx_oversize_pkts; ++ uint32 tx_fragment_pkts; ++ uint32 tx_underruns; ++ uint32 tx_total_cols; ++ uint32 tx_single_cols; ++ uint32 tx_multiple_cols; ++ uint32 tx_excessive_cols; ++ uint32 tx_late_cols; ++ uint32 tx_defered; ++ uint32 tx_carrier_lost; ++ uint32 tx_pause_pkts; ++ uint32 PAD[8]; ++ ++ uint32 rx_good_octets; ++ uint32 rx_good_pkts; ++ uint32 rx_octets; ++ uint32 rx_pkts; ++ uint32 rx_broadcast_pkts; ++ uint32 rx_multicast_pkts; ++ uint32 rx_len_64; ++ uint32 rx_len_65_to_127; ++ uint32 rx_len_128_to_255; ++ uint32 rx_len_256_to_511; ++ uint32 rx_len_512_to_1023; ++ uint32 rx_len_1024_to_max; ++ uint32 rx_jabber_pkts; ++ uint32 rx_oversize_pkts; ++ uint32 rx_fragment_pkts; ++ uint32 rx_missed_pkts; ++ uint32 rx_crc_align_errs; ++ uint32 rx_undersize; ++ uint32 rx_crc_errs; ++ uint32 rx_align_errs; ++ uint32 rx_symbol_errs; ++ uint32 rx_pause_pkts; ++ uint32 rx_nonpause_pkts; ++} bcmenetmib_t; ++ ++#endif /* _bcmenetmib_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmenetrxh.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmenetrxh.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmenetrxh.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmenetrxh.h 2005-08-28 11:12:20.433858696 +0200 +@@ -0,0 +1,43 @@ ++/* ++ * Hardware-specific Receive Data Header for the ++ * Broadcom Home Networking Division ++ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _bcmenetrxh_h_ ++#define _bcmenetrxh_h_ ++ ++/* ++ * The Ethernet MAC core returns an 8-byte Receive Frame Data Header ++ * with every frame consisting of ++ * 16bits of frame length, followed by ++ * 16bits of EMAC rx descriptor info, followed by 32bits of undefined. ++ */ ++typedef volatile struct { ++ uint16 len; ++ uint16 flags; ++ uint16 pad[12]; ++} bcmenetrxh_t; ++ ++#define RXHDR_LEN 28 ++ ++#define RXF_L ((uint16)1 << 11) /* last buffer in a frame */ ++#define RXF_MISS ((uint16)1 << 7) /* received due to promisc mode */ ++#define RXF_BRDCAST ((uint16)1 << 6) /* dest is broadcast address */ ++#define RXF_MULT ((uint16)1 << 5) /* dest is multicast address */ ++#define RXF_LG ((uint16)1 << 4) /* frame length > rxmaxlength */ ++#define RXF_NO ((uint16)1 << 3) /* odd number of nibbles */ ++#define RXF_RXER ((uint16)1 << 2) /* receive symbol error */ ++#define RXF_CRC ((uint16)1 << 1) /* crc error */ ++#define RXF_OV ((uint16)1 << 0) /* fifo overflow */ ++ ++#endif /* _bcmenetrxh_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmnvram.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmnvram.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmnvram.h 2005-08-28 11:12:20.433858696 +0200 +@@ -0,0 +1,131 @@ ++/* ++ * NVRAM variable manipulation ++ * ++ * $Copyright Open Broadcom Corporation$ ++ * ++ * $Id$ ++ */ ++ ++#ifndef _bcmnvram_h_ ++#define _bcmnvram_h_ ++ ++#ifndef _LANGUAGE_ASSEMBLY ++ ++#include <typedefs.h> ++ ++struct nvram_header { ++ uint32 magic; ++ uint32 len; ++ uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:27 init, mem. test 28, 29-31 reserved */ ++ uint32 config_refresh; /* 0:15 config, 16:31 refresh */ ++ uint32 config_ncdl; /* ncdl values for memc */ ++}; ++ ++struct nvram_tuple { ++ char *name; ++ char *value; ++ struct nvram_tuple *next; ++}; ++ ++/* ++ * Initialize NVRAM access. May be unnecessary or undefined on certain ++ * platforms. ++ */ ++extern int nvram_init(void *sbh); ++ ++/* ++ * Disable NVRAM access. May be unnecessary or undefined on certain ++ * platforms. ++ */ ++extern void nvram_exit(void); ++ ++/* ++ * Get the value of an NVRAM variable. The pointer returned may be ++ * invalid after a set. ++ * @param name name of variable to get ++ * @return value of variable or NULL if undefined ++ */ ++extern char * nvram_get(const char *name); ++ ++/* ++ * Get the value of an NVRAM variable. ++ * @param name name of variable to get ++ * @return value of variable or NUL if undefined ++ */ ++#define nvram_safe_get(name) (nvram_get(name) ? : "") ++ ++/* ++ * Match an NVRAM variable. ++ * @param name name of variable to match ++ * @param match value to compare against value of variable ++ * @return TRUE if variable is defined and its value is string equal ++ * to match or FALSE otherwise ++ */ ++static INLINE int ++nvram_match(char *name, char *match) { ++ const char *value = nvram_get(name); ++ return (value && !strcmp(value, match)); ++} ++ ++/* ++ * Inversely match an NVRAM variable. ++ * @param name name of variable to match ++ * @param match value to compare against value of variable ++ * @return TRUE if variable is defined and its value is not string ++ * equal to invmatch or FALSE otherwise ++ */ ++static INLINE int ++nvram_invmatch(char *name, char *invmatch) { ++ const char *value = nvram_get(name); ++ return (value && strcmp(value, invmatch)); ++} ++ ++/* ++ * Set the value of an NVRAM variable. The name and value strings are ++ * copied into private storage. Pointers to previously set values ++ * may become invalid. The new value may be immediately ++ * retrieved but will not be permanently stored until a commit. ++ * @param name name of variable to set ++ * @param value value of variable ++ * @return 0 on success and errno on failure ++ */ ++extern int nvram_set(const char *name, const char *value); ++ ++/* ++ * Unset an NVRAM variable. Pointers to previously set values ++ * remain valid until a set. ++ * @param name name of variable to unset ++ * @return 0 on success and errno on failure ++ * NOTE: use nvram_commit to commit this change to flash. ++ */ ++extern int nvram_unset(const char *name); ++ ++/* ++ * Commit NVRAM variables to permanent storage. All pointers to values ++ * may be invalid after a commit. ++ * NVRAM values are undefined after a commit. ++ * @return 0 on success and errno on failure ++ */ ++extern int nvram_commit(void); ++ ++/* ++ * Get all NVRAM variables (format name=value\0 ... \0\0). ++ * @param buf buffer to store variables ++ * @param count size of buffer in bytes ++ * @return 0 on success and errno on failure ++ */ ++extern int nvram_getall(char *buf, int count); ++ ++extern int kernel_write(unsigned char *buffer, int offset, int length); ++ ++#endif /* _LANGUAGE_ASSEMBLY */ ++ ++#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */ ++#define NVRAM_VERSION 1 ++#define NVRAM_HEADER_SIZE 20 ++#define NVRAM_LOC_GAP 0x100000 ++#define NVRAM_SPACE 0x2000 ++#define NVRAM_FIRST_LOC (0xbfd00000 - NVRAM_SPACE) ++#define NVRAM_LAST_LOC (0xc0000000 - NVRAM_SPACE) ++ ++#endif /* _bcmnvram_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmsrom.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmsrom.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmsrom.h 2005-08-28 11:12:20.433858696 +0200 +@@ -0,0 +1,24 @@ ++/* ++ * Misc useful routines to access NIC srom ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _bcmsrom_h_ ++#define _bcmsrom_h_ ++ ++extern int srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count); ++ ++extern int srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf); ++extern int srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf); ++extern int srom_parsecis(uint8 *cis, char **vars, int *count); ++ ++#endif /* _bcmsrom_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmutils.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmutils.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bcmutils.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bcmutils.h 2005-08-28 11:12:20.435858392 +0200 +@@ -0,0 +1,136 @@ ++/* ++ * Misc useful os-independent macros and functions. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _bcmutils_h_ ++#define _bcmutils_h_ ++ ++#ifndef MIN ++#define MIN(a, b) (((a)<(b))?(a):(b)) ++#endif ++ ++#ifndef MAX ++#define MAX(a, b) (((a)>(b))?(a):(b)) ++#endif ++ ++#define CEIL(x, y) (((x) + ((y)-1)) / (y)) ++#define ROUNDUP(x, y) ((((ulong)(x)+((y)-1))/(y))*(y)) ++#define ISALIGNED(a, x) (((uint)(a) & ((x)-1)) == 0) ++#define ISPOWEROF2(x) ((((x)-1)&(x))==0) ++#define OFFSETOF(type, member) ((uint) &((type *)0)->member) ++#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0])) ++ ++/* bit map related macros */ ++#ifndef setbit ++#define NBBY 8 /* 8 bits per byte */ ++#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY)) ++#define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) ++#define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY))) ++#define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) ++#endif ++ ++#define NBITS(type) (sizeof (type) * 8) ++ ++#define _BCM_U 0x01 /* upper */ ++#define _BCM_L 0x02 /* lower */ ++#define _BCM_D 0x04 /* digit */ ++#define _BCM_C 0x08 /* cntrl */ ++#define _BCM_P 0x10 /* punct */ ++#define _BCM_S 0x20 /* white space (space/lf/tab) */ ++#define _BCM_X 0x40 /* hex digit */ ++#define _BCM_SP 0x80 /* hard space (0x20) */ ++ ++extern unsigned char bcm_ctype[]; ++#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)]) ++ ++#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0) ++#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0) ++#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0) ++#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0) ++#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0) ++#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0) ++#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0) ++#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0) ++#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0) ++#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0) ++#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0) ++ ++/* ++ * Spin at most 'us' microseconds while 'exp' is true. ++ * Caller should explicitly test 'exp' when this completes ++ * and take appropriate error action if 'exp' is still true. ++ */ ++#define SPINWAIT(exp, us) { \ ++ uint countdown = (us) + 9; \ ++ while ((exp) && (countdown >= 10)) {\ ++ OSL_DELAY(10); \ ++ countdown -= 10; \ ++ } \ ++} ++ ++/* generic osl packet queue */ ++struct pktq { ++ void *head; ++ void *tail; ++ uint len; ++ uint maxlen; ++}; ++#define DEFAULT_QLEN 128 ++ ++#define pktq_len(q) ((q)->len) ++#define pktq_avail(q) ((q)->maxlen - (q)->len) ++#define pktq_head(q) ((q)->head) ++#define pktq_full(q) ((q)->len >= (q)->maxlen) ++ ++/* crc defines */ ++#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ ++#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ ++#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ ++#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ ++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ ++#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ ++ ++/* tag_ID/length/value_buffer tuple */ ++typedef struct bcm_tlv { ++ uint8 id; ++ uint8 len; ++ uint8 data[1]; ++} bcm_tlv_t; ++ ++/* externs */ ++extern uint bcm_atoi(char *s); ++extern uchar bcm_toupper(uchar c); ++extern ulong bcm_strtoul(char *cp, char **endp, uint base); ++extern void deadbeef(char *p, uint len); ++extern void prhex(char *msg, uchar *buf, uint len); ++extern void prpkt(char *msg, void *drv, void *p0); ++extern uint pktcopy(void *drv, void *p, uint offset, int len, uchar *buf); ++extern uint pkttotlen(void *drv, void *); ++extern uchar *bcm_ether_ntoa(char *ea, char *buf); ++extern int bcm_ether_atoe(char *p, char *ea); ++extern void bcm_mdelay(uint ms); ++extern char *getvar(char *vars, char *name); ++extern int getintvar(char *vars, char *name); ++ ++extern uint8 crc8(uint8 *p, uint nbytes, uint8 crc); ++extern uint16 crc16(uint8 *p, uint nbytes, uint16 crc); ++extern uint32 crc32(uint8 *p, uint nbytes, uint32 crc); ++extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key); ++extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key); ++extern void pktqinit(struct pktq *q, int maxlen); ++extern void pktenq(struct pktq *q, void *p, bool lifo); ++extern void *pktdeq(struct pktq *q); ++ ++#define bcmlog(fmt, a1, a2) ++#define bcmdumplog(buf, size) *buf = '\0' ++ ++#endif /* _bcmutils_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bitfuncs.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bitfuncs.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/bitfuncs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/bitfuncs.h 2005-08-28 11:12:20.435858392 +0200 +@@ -0,0 +1,85 @@ ++/* ++ * bit manipulation utility functions ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _BITFUNCS_H ++#define _BITFUNCS_H ++ ++#include <typedefs.h> ++ ++/* local prototypes */ ++static INLINE uint32 find_msbit(uint32 x); ++ ++ ++/* ++ * find_msbit: returns index of most significant set bit in x, with index ++ * range defined as 0-31. NOTE: returns zero if input is zero. ++ */ ++ ++#if defined(USE_PENTIUM_BSR) && defined(__GNUC__) ++ ++/* ++ * Implementation for Pentium processors and gcc. Note that this ++ * instruction is actually very slow on some processors (e.g., family 5, ++ * model 2, stepping 12, "Pentium 75 - 200"), so we use the generic ++ * implementation instead. ++ */ ++static INLINE uint32 find_msbit(uint32 x) ++{ ++ uint msbit; ++ __asm__("bsrl %1,%0" ++ :"=r" (msbit) ++ :"r" (x)); ++ return msbit; ++} ++ ++#else ++ ++/* ++ * Generic Implementation ++ */ ++ ++#define DB_POW_MASK16 0xffff0000 ++#define DB_POW_MASK8 0x0000ff00 ++#define DB_POW_MASK4 0x000000f0 ++#define DB_POW_MASK2 0x0000000c ++#define DB_POW_MASK1 0x00000002 ++ ++static INLINE uint32 find_msbit(uint32 x) ++{ ++ uint32 temp_x = x; ++ uint msbit = 0; ++ if (temp_x & DB_POW_MASK16) { ++ temp_x >>= 16; ++ msbit = 16; ++ } ++ if (temp_x & DB_POW_MASK8) { ++ temp_x >>= 8; ++ msbit += 8; ++ } ++ if (temp_x & DB_POW_MASK4) { ++ temp_x >>= 4; ++ msbit += 4; ++ } ++ if (temp_x & DB_POW_MASK2) { ++ temp_x >>= 2; ++ msbit += 2; ++ } ++ if (temp_x & DB_POW_MASK1) { ++ msbit += 1; ++ } ++ return(msbit); ++} ++ ++#endif ++ ++#endif /* _BITFUNCS_H */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/epivers.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/epivers.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/epivers.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/epivers.h 2005-08-28 11:12:20.435858392 +0200 +@@ -0,0 +1,69 @@ ++/* ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ * ++*/ ++ ++#ifndef _epivers_h_ ++#define _epivers_h_ ++ ++#ifdef linux ++#include <linux/config.h> ++#endif ++ ++/* Vendor Name, ASCII, 32 chars max */ ++#ifdef COMPANYNAME ++#define HPNA_VENDOR COMPANYNAME ++#else ++#define HPNA_VENDOR "Broadcom Corporation" ++#endif ++ ++/* Driver Date, ASCII, 32 chars max */ ++#define HPNA_DRV_BUILD_DATE __DATE__ ++ ++/* Hardware Manufacture Date, ASCII, 32 chars max */ ++#define HPNA_HW_MFG_DATE "Not Specified" ++ ++/* See documentation for Device Type values, 32 values max */ ++#ifndef HPNA_DEV_TYPE ++ ++#if defined(CONFIG_BRCM_VJ) ++#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY } ++ ++#elif defined(CONFIG_BCRM_93725) ++#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY } ++ ++#else ++#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC } ++ ++#endif ++ ++#endif /* !HPNA_DEV_TYPE */ ++ ++ ++#define EPI_MAJOR_VERSION 1 ++ ++#define EPI_MINOR_VERSION 1 ++ ++#define EPI_RC_NUMBER 2 ++ ++#define EPI_INCREMENTAL_NUMBER 0 ++ ++#define EPI_BUILD_NUMBER 0 ++ ++#define EPI_VERSION 1,1,2,0 ++ ++#define EPI_VERSION_NUM 0x01010200 ++ ++/* Driver Version String, ASCII, 32 chars max */ ++#define EPI_VERSION_STR "1.1.2.0" ++#define EPI_ROUTER_VERSION_STR "1.1.2.0" ++ ++#endif /* _epivers_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/epivers.h.in linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/epivers.h.in +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/epivers.h.in 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/epivers.h.in 2005-08-28 11:12:20.436858240 +0200 +@@ -0,0 +1,69 @@ ++/* ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ * ++*/ ++ ++#ifndef _epivers_h_ ++#define _epivers_h_ ++ ++#ifdef linux ++#include <linux/config.h> ++#endif ++ ++/* Vendor Name, ASCII, 32 chars max */ ++#ifdef COMPANYNAME ++#define HPNA_VENDOR COMPANYNAME ++#else ++#define HPNA_VENDOR "Broadcom Corporation" ++#endif ++ ++/* Driver Date, ASCII, 32 chars max */ ++#define HPNA_DRV_BUILD_DATE __DATE__ ++ ++/* Hardware Manufacture Date, ASCII, 32 chars max */ ++#define HPNA_HW_MFG_DATE "Not Specified" ++ ++/* See documentation for Device Type values, 32 values max */ ++#ifndef HPNA_DEV_TYPE ++ ++#if defined(CONFIG_BRCM_VJ) ++#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY } ++ ++#elif defined(CONFIG_BCRM_93725) ++#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY } ++ ++#else ++#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC } ++ ++#endif ++ ++#endif /* !HPNA_DEV_TYPE */ ++ ++ ++#define EPI_MAJOR_VERSION @EPI_MAJOR_VERSION@ ++ ++#define EPI_MINOR_VERSION @EPI_MINOR_VERSION@ ++ ++#define EPI_RC_NUMBER @EPI_RC_NUMBER@ ++ ++#define EPI_INCREMENTAL_NUMBER @EPI_INCREMENTAL_NUMBER@ ++ ++#define EPI_BUILD_NUMBER @EPI_BUILD_NUMBER@ ++ ++#define EPI_VERSION @EPI_VERSION@ ++ ++#define EPI_VERSION_NUM @EPI_VERSION_NUM@ ++ ++/* Driver Version String, ASCII, 32 chars max */ ++#define EPI_VERSION_STR "@EPI_VERSION_STR@" ++#define EPI_ROUTER_VERSION_STR "@EPI_ROUTER_VERSION_STR@" ++ ++#endif /* _epivers_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/etsockio.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/etsockio.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/etsockio.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/etsockio.h 2005-08-28 11:12:20.436858240 +0200 +@@ -0,0 +1,60 @@ ++/* ++ * Driver-specific socket ioctls ++ * used by BSD, Linux, and PSOS ++ * Broadcom BCM44XX 10/100Mbps Ethernet Device Driver ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _etsockio_h_ ++#define _etsockio_h_ ++ ++/* THESE MUST BE CONTIGUOUS AND CONSISTENT WITH VALUES IN ETC.H */ ++ ++ ++#if defined(linux) ++#define SIOCSETCUP (SIOCDEVPRIVATE + 0) ++#define SIOCSETCDOWN (SIOCDEVPRIVATE + 1) ++#define SIOCSETCLOOP (SIOCDEVPRIVATE + 2) ++#define SIOCGETCDUMP (SIOCDEVPRIVATE + 3) ++#define SIOCSETCSETMSGLEVEL (SIOCDEVPRIVATE + 4) ++#define SIOCSETCPROMISC (SIOCDEVPRIVATE + 5) ++#define SIOCSETCTXDOWN (SIOCDEVPRIVATE + 6) /* obsolete */ ++#define SIOCSETCSPEED (SIOCDEVPRIVATE + 7) ++#define SIOCTXGEN (SIOCDEVPRIVATE + 8) ++#define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9) ++#define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10) ++#define SIOCPERF (SIOCDEVPRIVATE + 11) ++#define SIOCPERFDMA (SIOCDEVPRIVATE + 12) ++ ++#else /* !linux */ ++ ++#define SIOCSETCUP _IOWR('e', 130 + 0, struct ifreq) ++#define SIOCSETCDOWN _IOWR('e', 130 + 1, struct ifreq) ++#define SIOCSETCLOOP _IOWR('e', 130 + 2, struct ifreq) ++#define SIOCGETCDUMP _IOWR('e', 130 + 3, struct ifreq) ++#define SIOCSETCSETMSGLEVEL _IOWR('e', 130 + 4, struct ifreq) ++#define SIOCSETCPROMISC _IOWR('e', 130 + 5, struct ifreq) ++#define SIOCSETCTXDOWN _IOWR('e', 130 + 6, struct ifreq) /* obsolete */ ++#define SIOCSETCSPEED _IOWR('e', 130 + 7, struct ifreq) ++#define SIOCTXGEN _IOWR('e', 130 + 8, struct ifreq) ++ ++#endif ++ ++/* arg to SIOCTXGEN */ ++struct txg { ++ uint32 num; /* number of frames to send */ ++ uint32 delay; /* delay in microseconds between sending each */ ++ uint32 size; /* size of ether frame to send */ ++ uchar buf[1514]; /* starting ether frame data */ ++}; ++ ++#endif +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/flash.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/flash.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/flash.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/flash.h 2005-08-28 11:12:20.437858088 +0200 +@@ -0,0 +1,184 @@ ++/* ++ * flash.h: Common definitions for flash access. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++/* Types of flashes we know about */ ++typedef enum _flash_type {OLD, BSC, SCS, AMD, SST} flash_type_t; ++ ++/* Commands to write/erase the flases */ ++typedef struct _flash_cmds{ ++ flash_type_t type; ++ bool need_unlock; ++ uint16 pre_erase; ++ uint16 erase_block; ++ uint16 erase_chip; ++ uint16 write_word; ++ uint16 write_buf; ++ uint16 clear_csr; ++ uint16 read_csr; ++ uint16 read_id; ++ uint16 confirm; ++ uint16 read_array; ++} flash_cmds_t; ++ ++#define UNLOCK_CMD_WORDS 2 ++ ++typedef struct _unlock_cmd { ++ uint addr[UNLOCK_CMD_WORDS]; ++ uint16 cmd[UNLOCK_CMD_WORDS]; ++} unlock_cmd_t; ++ ++/* Flash descriptors */ ++typedef struct _flash_desc { ++ uint16 mfgid; /* Manufacturer Id */ ++ uint16 devid; /* Device Id */ ++ uint size; /* Total size in bytes */ ++ uint width; /* Device width in bytes */ ++ flash_type_t type; /* Device type old, S, J */ ++ uint bsize; /* Block size */ ++ uint nb; /* Number of blocks */ ++ uint ff; /* First full block */ ++ uint lf; /* Last full block */ ++ uint nsub; /* Number of subblocks */ ++ uint *subblocks; /* Offsets for subblocks */ ++ char *desc; /* Description */ ++} flash_desc_t; ++ ++ ++#ifdef DECLARE_FLASHES ++ ++flash_cmds_t flash_cmds[] = { ++/* type needu preera eraseb erasech write wbuf clcsr rdcsr rdid confrm read */ ++ { BSC, 0, 0x00, 0x20, 0x00, 0x40, 0x00, 0x50, 0x70, 0x90, 0xd0, 0xff }, ++ { SCS, 0, 0x00, 0x20, 0x00, 0x40, 0xe8, 0x50, 0x70, 0x90, 0xd0, 0xff }, ++ { AMD, 1, 0x80, 0x30, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 }, ++ { SST, 1, 0x80, 0x50, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 }, ++ { 0 } ++}; ++ ++unlock_cmd_t unlock_cmd_amd = { ++#ifdef MIPSEB ++/* addr: */ { 0x0aa8, 0x0556}, ++#else ++/* addr: */ { 0x0aaa, 0x0554}, ++#endif ++/* data: */ { 0xaa, 0x55} ++}; ++ ++unlock_cmd_t unlock_cmd_sst = { ++#ifdef MIPSEB ++/* addr: */ { 0xaaa8, 0x5556}, ++#else ++/* addr: */ { 0xaaaa, 0x5554}, ++#endif ++/* data: */ { 0xaa, 0x55} ++}; ++ ++#define AMD_CMD 0xaaa ++#define SST_CMD 0xaaaa ++ ++/* intel unlock block cmds */ ++#define INTEL_UNLOCK1 0x60 ++#define INTEL_UNLOCK2 0xD0 ++ ++/* Just eight blocks of 8KB byte each */ ++ ++uint blk8x8k[] = { 0x00000000, ++ 0x00002000, ++ 0x00004000, ++ 0x00006000, ++ 0x00008000, ++ 0x0000a000, ++ 0x0000c000, ++ 0x0000e000, ++ 0x00010000 ++}; ++ ++/* Funky AMD arrangement for 29xx800's */ ++uint amd800[] = { 0x00000000, /* 16KB */ ++ 0x00004000, /* 32KB */ ++ 0x0000c000, /* 8KB */ ++ 0x0000e000, /* 8KB */ ++ 0x00010000, /* 8KB */ ++ 0x00012000, /* 8KB */ ++ 0x00014000, /* 32KB */ ++ 0x0001c000, /* 16KB */ ++ 0x00020000 ++}; ++ ++/* AMD arrangement for 29xx160's */ ++uint amd4112[] = { 0x00000000, /* 32KB */ ++ 0x00008000, /* 8KB */ ++ 0x0000a000, /* 8KB */ ++ 0x0000c000, /* 16KB */ ++ 0x00010000 ++}; ++uint amd2114[] = { 0x00000000, /* 16KB */ ++ 0x00004000, /* 8KB */ ++ 0x00006000, /* 8KB */ ++ 0x00008000, /* 32KB */ ++ 0x00010000 ++}; ++ ++ ++ ++flash_desc_t flashes[] = { ++ { 0x00b0, 0x00d0, 0x0200000, 2, SCS, 0x10000, 32, 0, 31, 0, NULL, "Intel 28F160S3/5 1Mx16" }, ++ { 0x00b0, 0x00d4, 0x0400000, 2, SCS, 0x10000, 64, 0, 63, 0, NULL, "Intel 28F320S3/5 2Mx16" }, ++ { 0x0089, 0x8890, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160B3 1Mx16 TopB" }, ++ { 0x0089, 0x8891, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160B3 1Mx16 BotB" }, ++ { 0x0089, 0x8896, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320B3 2Mx16 TopB" }, ++ { 0x0089, 0x8897, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320B3 2Mx16 BotB" }, ++ { 0x0089, 0x8898, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640B3 4Mx16 TopB" }, ++ { 0x0089, 0x8899, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640B3 4Mx16 BotB" }, ++ { 0x0089, 0x88C2, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160C3 1Mx16 TopB" }, ++ { 0x0089, 0x88C3, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160C3 1Mx16 BotB" }, ++ { 0x0089, 0x88C4, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320C3 2Mx16 TopB" }, ++ { 0x0089, 0x88C5, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320C3 2Mx16 BotB" }, ++ { 0x0089, 0x88CC, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640C3 4Mx16 TopB" }, ++ { 0x0089, 0x88CD, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640C3 4Mx16 BotB" }, ++ { 0x0089, 0x0014, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J5 2Mx16" }, ++ { 0x0089, 0x0015, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J5 4Mx16" }, ++ { 0x0089, 0x0016, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J3 2Mx16" }, ++ { 0x0089, 0x0017, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J3 4Mx16" }, ++ { 0x0089, 0x0018, 0x1000000, 2, SCS, 0x20000, 128, 0, 127, 0, NULL, "Intel 28F128J3 8Mx16" }, ++ { 0x00b0, 0x00e3, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Sharp 28F320BJE 2Mx16 BotB" }, ++ { 0x0001, 0x224a, 0x0100000, 2, AMD, 0x10000, 16, 0, 13, 8, amd800, "AMD 29DL800BT 512Kx16 TopB" }, ++ { 0x0001, 0x22cb, 0x0100000, 2, AMD, 0x10000, 16, 2, 15, 8, amd800, "AMD 29DL800BB 512Kx16 BotB" }, ++ { 0x0001, 0x22c4, 0x0200000, 2, AMD, 0x10000, 32, 0, 30, 4, amd2114, "AMD 29lv160DT 1Mx16 TopB" }, ++ { 0x0001, 0x2249, 0x0200000, 2, AMD, 0x10000, 32, 1, 31, 4, amd4112, "AMD 29lv160DB 1Mx16 BotB" }, ++ { 0x0001, 0x22f6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320DT 2Mx16 TopB" }, ++ { 0x0001, 0x22f9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320DB 2Mx16 BotB" }, ++ { 0x0001, 0x2201, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" }, ++ { 0x0001, 0x2200, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320MB 2Mx16 BotB" }, ++ { 0x0020, 0x22CA, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "ST 29w320DT 2Mx16 TopB" }, ++ { 0x0020, 0x22CB, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "ST 29w320DB 2Mx16 BotB" }, ++ { 0x00C2, 0x00A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" }, ++ { 0x00C2, 0x00A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" }, ++ { 0x0004, 0x22F6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MBM29LV320TE 2Mx16 TopB" }, ++ { 0x0004, 0x22F9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MBM29LV320BE 2Mx16 BotB" }, ++ { 0x0098, 0x009A, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "TC58FVT321 2Mx16 TopB" }, ++ { 0x0098, 0x009C, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "TC58FVB321 2Mx16 BotB" }, ++ { 0x00C2, 0x22A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" }, ++ { 0x00C2, 0x22A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" }, ++ { 0x00BF, 0x2783, 0x0400000, 2, SST, 0x10000, 64, 0, 63, 0, NULL, "SST39VF320 2Mx16" }, ++ { 0, 0, 0, 0, OLD, 0, 0, 0, 0, 0, NULL, NULL }, ++}; ++ ++#else ++ ++extern flash_cmds_t flash_cmds[]; ++extern unlock_cmd_t unlock_cmd; ++extern flash_desc_t flashes[]; ++ ++#endif +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/flashutl.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/flashutl.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/flashutl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/flashutl.h 2005-08-28 11:12:20.437858088 +0200 +@@ -0,0 +1,34 @@ ++/* ++ * BCM47XX FLASH driver interface ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _flashutl_h_ ++#define _flashutl_h_ ++ ++#define FLASH_BASE 0xbfc00000 /* BCM4710 */ ++ ++int flash_init(void* base_addr, char *flash_str); ++int flash_erase(void); ++int flash_eraseblk(unsigned long off); ++int flash_write(unsigned long off, uint16 *src, uint nbytes); ++unsigned long flash_block_base(unsigned long off); ++unsigned long flash_block_lim(unsigned long off); ++int FlashWriteRange(unsigned short* dst, unsigned short* src, unsigned int numbytes); ++ ++void nvWrite(unsigned short *data, unsigned int len); ++ ++/* Global vars */ ++extern char* flashutl_base; ++extern flash_desc_t* flashutl_desc; ++extern flash_cmds_t* flashutl_cmd; ++ ++#endif /* _flashutl_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/hnddma.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/hnddma.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/hnddma.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/hnddma.h 2005-08-28 11:12:20.438857936 +0200 +@@ -0,0 +1,181 @@ ++/* ++ * Generic Broadcom Home Networking Division (HND) DMA engine definitions. ++ * This supports the following chips: BCM42xx, 44xx, 47xx . ++ * ++ * $Id$ ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ */ ++ ++#ifndef _hnddma_h_ ++#define _hnddma_h_ ++ ++/* ++ * Each DMA processor consists of a transmit channel and a receive channel. ++ */ ++typedef volatile struct { ++ /* transmit channel */ ++ uint32 xmtcontrol; /* enable, et al */ ++ uint32 xmtaddr; /* descriptor ring base address (4K aligned) */ ++ uint32 xmtptr; /* last descriptor posted to chip */ ++ uint32 xmtstatus; /* current active descriptor, et al */ ++ ++ /* receive channel */ ++ uint32 rcvcontrol; /* enable, et al */ ++ uint32 rcvaddr; /* descriptor ring base address (4K aligned) */ ++ uint32 rcvptr; /* last descriptor posted to chip */ ++ uint32 rcvstatus; /* current active descriptor, et al */ ++} dmaregs_t; ++ ++typedef volatile struct { ++ /* diag access */ ++ uint32 fifoaddr; /* diag address */ ++ uint32 fifodatalow; /* low 32bits of data */ ++ uint32 fifodatahigh; /* high 32bits of data */ ++ uint32 pad; /* reserved */ ++} dmafifo_t; ++ ++/* transmit channel control */ ++#define XC_XE ((uint32)1 << 0) /* transmit enable */ ++#define XC_SE ((uint32)1 << 1) /* transmit suspend request */ ++#define XC_LE ((uint32)1 << 2) /* loopback enable */ ++#define XC_FL ((uint32)1 << 4) /* flush request */ ++ ++/* transmit descriptor table pointer */ ++#define XP_LD_MASK 0xfff /* last valid descriptor */ ++ ++/* transmit channel status */ ++#define XS_CD_MASK 0x0fff /* current descriptor pointer */ ++#define XS_XS_MASK 0xf000 /* transmit state */ ++#define XS_XS_SHIFT 12 ++#define XS_XS_DISABLED 0x0000 /* disabled */ ++#define XS_XS_ACTIVE 0x1000 /* active */ ++#define XS_XS_IDLE 0x2000 /* idle wait */ ++#define XS_XS_STOPPED 0x3000 /* stopped */ ++#define XS_XS_SUSP 0x4000 /* suspend pending */ ++#define XS_XE_MASK 0xf0000 /* transmit errors */ ++#define XS_XE_SHIFT 16 ++#define XS_XE_NOERR 0x00000 /* no error */ ++#define XS_XE_DPE 0x10000 /* descriptor protocol error */ ++#define XS_XE_DFU 0x20000 /* data fifo underrun */ ++#define XS_XE_BEBR 0x30000 /* bus error on buffer read */ ++#define XS_XE_BEDA 0x40000 /* bus error on descriptor access */ ++#define XS_FL ((uint32)1 << 20) /* flushed */ ++ ++/* receive channel control */ ++#define RC_RE ((uint32)1 << 0) /* receive enable */ ++#define RC_RO_MASK 0xfe /* receive frame offset */ ++#define RC_RO_SHIFT 1 ++#define RC_FM ((uint32)1 << 8) /* direct fifo receive (pio) mode */ ++ ++/* receive descriptor table pointer */ ++#define RP_LD_MASK 0xfff /* last valid descriptor */ ++ ++/* receive channel status */ ++#define RS_CD_MASK 0x0fff /* current descriptor pointer */ ++#define RS_RS_MASK 0xf000 /* receive state */ ++#define RS_RS_SHIFT 12 ++#define RS_RS_DISABLED 0x0000 /* disabled */ ++#define RS_RS_ACTIVE 0x1000 /* active */ ++#define RS_RS_IDLE 0x2000 /* idle wait */ ++#define RS_RS_STOPPED 0x3000 /* reserved */ ++#define RS_RE_MASK 0xf0000 /* receive errors */ ++#define RS_RE_SHIFT 16 ++#define RS_RE_NOERR 0x00000 /* no error */ ++#define RS_RE_DPE 0x10000 /* descriptor protocol error */ ++#define RS_RE_DFO 0x20000 /* data fifo overflow */ ++#define RS_RE_BEBW 0x30000 /* bus error on buffer write */ ++#define RS_RE_BEDA 0x40000 /* bus error on descriptor access */ ++ ++/* fifoaddr */ ++#define FA_OFF_MASK 0xffff /* offset */ ++#define FA_SEL_MASK 0xf0000 /* select */ ++#define FA_SEL_SHIFT 16 ++#define FA_SEL_XDD 0x00000 /* transmit dma data */ ++#define FA_SEL_XDP 0x10000 /* transmit dma pointers */ ++#define FA_SEL_RDD 0x40000 /* receive dma data */ ++#define FA_SEL_RDP 0x50000 /* receive dma pointers */ ++#define FA_SEL_XFD 0x80000 /* transmit fifo data */ ++#define FA_SEL_XFP 0x90000 /* transmit fifo pointers */ ++#define FA_SEL_RFD 0xc0000 /* receive fifo data */ ++#define FA_SEL_RFP 0xd0000 /* receive fifo pointers */ ++ ++/* ++ * DMA Descriptor ++ * Descriptors are only read by the hardware, never written back. ++ */ ++typedef volatile struct { ++ uint32 ctrl; /* misc control bits & bufcount */ ++ uint32 addr; /* data buffer address */ ++} dmadd_t; ++ ++/* ++ * Each descriptor ring must be 4096byte aligned ++ * and fit within a single 4096byte page. ++ */ ++#define DMAMAXRINGSZ 4096 ++#define DMARINGALIGN 4096 ++ ++/* control flags */ ++#define CTRL_BC_MASK 0x1fff /* buffer byte count */ ++#define CTRL_EOT ((uint32)1 << 28) /* end of descriptor table */ ++#define CTRL_IOC ((uint32)1 << 29) /* interrupt on completion */ ++#define CTRL_EOF ((uint32)1 << 30) /* end of frame */ ++#define CTRL_SOF ((uint32)1 << 31) /* start of frame */ ++ ++/* control flags in the range [27:20] are core-specific and not defined here */ ++#define CTRL_CORE_MASK 0x0ff00000 ++ ++/* export structure */ ++typedef volatile struct { ++ /* rx error counters */ ++ uint rxgiants; /* rx giant frames */ ++ uint rxnobuf; /* rx out of dma descriptors */ ++ /* tx error counters */ ++ uint txnobuf; /* tx out of dma descriptors */ ++} hnddma_t; ++ ++#ifndef di_t ++#define di_t void ++#endif ++ ++/* externs */ ++extern void *dma_attach(void *drv, void *dev, char *name, dmaregs_t *dmaregs, ++ uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset, ++ uint ddoffset, uint dataoffset, uint *msg_level); ++extern void dma_detach(di_t *di); ++extern void dma_txreset(di_t *di); ++extern void dma_rxreset(di_t *di); ++extern void dma_txinit(di_t *di); ++extern bool dma_txenabled(di_t *di); ++extern void dma_rxinit(di_t *di); ++extern void dma_rxenable(di_t *di); ++extern bool dma_rxenabled(di_t *di); ++extern void dma_txsuspend(di_t *di); ++extern void dma_txresume(di_t *di); ++extern bool dma_txsuspended(di_t *di); ++extern bool dma_txstopped(di_t *di); ++extern bool dma_rxstopped(di_t *di); ++extern int dma_txfast(di_t *di, void *p, uint32 coreflags); ++extern int dma_tx(di_t *di, void *p, uint32 coreflags); ++extern void dma_fifoloopbackenable(di_t *di); ++extern void *dma_rx(di_t *di); ++extern void dma_rxfill(di_t *di); ++extern void dma_txreclaim(di_t *di, bool forceall); ++extern void dma_rxreclaim(di_t *di); ++extern char *dma_dump(di_t *di, char *buf); ++extern char *dma_dumptx(di_t *di, char *buf); ++extern char *dma_dumprx(di_t *di, char *buf); ++extern uint dma_getvar(di_t *di, char *name); ++extern void *dma_getnexttxp(di_t *di, bool forceall); ++extern void *dma_getnextrxp(di_t *di, bool forceall); ++extern void dma_txblock(di_t *di); ++extern void dma_txunblock(di_t *di); ++extern uint dma_txactive(di_t *di); ++ ++#endif /* _hnddma_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/hndmips.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/hndmips.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/hndmips.h 2005-08-28 11:12:20.439857784 +0200 +@@ -0,0 +1,16 @@ ++/* ++ * Alternate include file for HND sbmips.h since CFE also ships with ++ * a sbmips.h. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include "sbmips.h" +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/linux_osl.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/linux_osl.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/linux_osl.h 2005-08-28 11:12:20.440857632 +0200 +@@ -0,0 +1,313 @@ ++/* ++ * Linux OS Independent Layer ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _linux_osl_h_ ++#define _linux_osl_h_ ++ ++#include <typedefs.h> ++ ++/* use current 2.4.x calling conventions */ ++#include <linuxver.h> ++ ++/* assert and panic */ ++#define ASSERT(exp) do {} while (0) ++ ++/* PCMCIA attribute space access macros */ ++#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \ ++ osl_pcmcia_read_attr((osh), (offset), (buf), (size)) ++#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \ ++ osl_pcmcia_write_attr((osh), (offset), (buf), (size)) ++extern void osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size); ++extern void osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size); ++ ++/* PCI configuration space access macros */ ++#define OSL_PCI_READ_CONFIG(loc, offset, size) \ ++ osl_pci_read_config((loc), (offset), (size)) ++#define OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \ ++ osl_pci_write_config((loc), (offset), (size), (val)) ++extern uint32 osl_pci_read_config(void *loc, uint size, uint offset); ++extern void osl_pci_write_config(void *loc, uint offset, uint size, uint val); ++ ++/* OSL initialization */ ++#define osl_init() do {} while (0) ++ ++/* host/bus architecture-specific byte swap */ ++#define BUS_SWAP32(v) (v) ++ ++/* ++ * BINOSL selects the slightly slower function-call-based binary compatible osl. ++ * Macros expand to calls to functions defined in linux_osl.c . ++ */ ++#ifndef BINOSL ++ ++/* string library, kernel mode */ ++#define printf(fmt, args...) printk(fmt, ## args) ++#include <linux/kernel.h> ++#include <linux/string.h> ++ ++/* register access macros */ ++#define R_REG(r) ({ \ ++ __typeof(*(r)) __osl_v; \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): __osl_v = readb((volatile uint8*)(r)); break; \ ++ case sizeof(uint16): __osl_v = readw((volatile uint16*)(r)); break; \ ++ case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \ ++ } \ ++ __osl_v; \ ++}) ++#define W_REG(r, v) do { \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \ ++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \ ++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ ++ } \ ++} while (0) ++ ++#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) ++#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) ++ ++/* bcopy, bcmp, and bzero */ ++#define bcopy(src, dst, len) memcpy((dst), (src), (len)) ++#define bcmp(b1, b2, len) memcmp((b1), (b2), (len)) ++#define bzero(b, len) memset((b), '\0', (len)) ++ ++/* general purpose memory allocation */ ++#define MALLOC(size) kmalloc((size), GFP_ATOMIC) ++#define MFREE(addr, size) kfree((addr)) ++ ++/* uncached virtual address */ ++#ifdef mips ++#define OSL_UNCACHED(va) KSEG1ADDR((va)) ++#include <asm/addrspace.h> ++#else ++#define OSL_UNCACHED(va) (va) ++#endif ++ ++/* get processor cycle count */ ++#if defined(mips) ++#define OSL_GETCYCLES(x) ((x) = read_c0_count() * 2) ++#elif defined(__i386__) ++#define OSL_GETCYCLES(x) rdtscl((x)) ++#else ++#define OSL_GETCYCLES(x) ((x) = 0) ++#endif ++ ++/* dereference an address that may cause a bus exception */ ++#ifdef mips ++#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17)) ++#define BUSPROBE(val, addr) panic("get_dbe() will not fixup a bus exception when compiled into a module") ++#else ++#define BUSPROBE(val, addr) get_dbe((val), (addr)) ++#include <asm/paccess.h> ++#endif ++#else ++#define BUSPROBE(val, addr) ({ (val) = R_REG((addr)); 0; }) ++#endif ++ ++/* map/unmap physical to virtual I/O */ ++#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size)) ++#define REG_UNMAP(va) iounmap((void *)(va)) ++ ++/* allocate/free shared (dma-able) consistent (uncached) memory */ ++#define DMA_ALLOC_CONSISTENT(dev, size, pap) \ ++ pci_alloc_consistent((dev), (size), (dma_addr_t*)(pap)) ++#define DMA_FREE_CONSISTENT(dev, va, size, pa) \ ++ pci_free_consistent((dev), (size), (va), (dma_addr_t)(pa)) ++ ++/* map/unmap direction */ ++#define DMA_TX PCI_DMA_TODEVICE ++#define DMA_RX PCI_DMA_FROMDEVICE ++ ++/* map/unmap shared (dma-able) memory */ ++#define DMA_MAP(dev, va, size, direction, p) \ ++ pci_map_single((dev), (va), (size), (direction)) ++#define DMA_UNMAP(dev, pa, size, direction, p) \ ++ pci_unmap_single((dev), (dma_addr_t)(pa), (size), (direction)) ++ ++/* microsecond delay */ ++#define OSL_DELAY(usec) udelay(usec) ++#include <linux/delay.h> ++#define OSL_SLEEP(usec) set_current_state(TASK_INTERRUPTIBLE); \ ++ schedule_timeout((usec*HZ)/1000000); ++#define OSL_IN_INTERRUPT() in_interrupt() ++ ++/* shared (dma-able) memory access macros */ ++#define R_SM(r) *(r) ++#define W_SM(r, v) (*(r) = (v)) ++#define BZERO_SM(r, len) memset((r), '\0', (len)) ++ ++/* packet primitives */ ++#define PKTGET(drv, len, send) osl_pktget((drv), (len), (send)) ++#define PKTFREE(drv, skb, send) osl_pktfree((skb)) ++#define PKTDATA(drv, skb) (((struct sk_buff*)(skb))->data) ++#define PKTLEN(drv, skb) (((struct sk_buff*)(skb))->len) ++#define PKTHEADROOM(drv, skb) (PKTDATA(drv,skb)-(((struct sk_buff*)(skb))->head)) ++#define PKTTAILROOM(drv, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail)) ++#define PKTNEXT(drv, skb) (((struct sk_buff*)(skb))->next) ++#define PKTSETNEXT(skb, x) (((struct sk_buff*)(skb))->next = (struct sk_buff*)(x)) ++#define PKTSETLEN(drv, skb, len) __skb_trim((struct sk_buff*)(skb), (len)) ++#define PKTPUSH(drv, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes)) ++#define PKTPULL(drv, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes)) ++#define PKTDUP(drv, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC) ++#define PKTCOOKIE(skb) ((void*)((struct sk_buff*)(skb))->csum) ++#define PKTSETCOOKIE(skb, x) (((struct sk_buff*)(skb))->csum = (uint)(x)) ++#define PKTLINK(skb) (((struct sk_buff*)(skb))->prev) ++#define PKTSETLINK(skb, x) (((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x)) ++extern void *osl_pktget(void *drv, uint len, bool send); ++extern void osl_pktfree(void *skb); ++ ++#else /* BINOSL */ ++ ++/* string library */ ++#ifndef LINUX_OSL ++#undef printf ++#define printf(fmt, args...) osl_printf((fmt), ## args) ++#undef sprintf ++#define sprintf(buf, fmt, args...) osl_sprintf((buf), (fmt), ## args) ++#undef strcmp ++#define strcmp(s1, s2) osl_strcmp((s1), (s2)) ++#undef strncmp ++#define strncmp(s1, s2, n) osl_strncmp((s1), (s2), (n)) ++#undef strlen ++#define strlen(s) osl_strlen((s)) ++#undef strcpy ++#define strcpy(d, s) osl_strcpy((d), (s)) ++#undef strncpy ++#define strncpy(d, s, n) osl_strncpy((d), (s), (n)) ++#endif ++extern int osl_printf(const char *format, ...); ++extern int osl_sprintf(char *buf, const char *format, ...); ++extern int osl_strcmp(const char *s1, const char *s2); ++extern int osl_strncmp(const char *s1, const char *s2, uint n); ++extern int osl_strlen(char *s); ++extern char* osl_strcpy(char *d, const char *s); ++extern char* osl_strncpy(char *d, const char *s, uint n); ++ ++/* register access macros */ ++#define R_REG(r) ({ \ ++ __typeof(*(r)) __osl_v; \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): __osl_v = osl_readb((volatile uint8*)(r)); break; \ ++ case sizeof(uint16): __osl_v = osl_readw((volatile uint16*)(r)); break; \ ++ case sizeof(uint32): __osl_v = osl_readl((volatile uint32*)(r)); break; \ ++ } \ ++ __osl_v; \ ++}) ++#define W_REG(r, v) do { \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \ ++ case sizeof(uint16): osl_writew((uint16)(v), (volatile uint16*)(r)); break; \ ++ case sizeof(uint32): osl_writel((uint32)(v), (volatile uint32*)(r)); break; \ ++ } \ ++} while (0) ++#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) ++#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) ++extern uint8 osl_readb(volatile uint8 *r); ++extern uint16 osl_readw(volatile uint16 *r); ++extern uint32 osl_readl(volatile uint32 *r); ++extern void osl_writeb(uint8 v, volatile uint8 *r); ++extern void osl_writew(uint16 v, volatile uint16 *r); ++extern void osl_writel(uint32 v, volatile uint32 *r); ++ ++/* bcopy, bcmp, and bzero */ ++extern void bcopy(const void *src, void *dst, int len); ++extern int bcmp(const void *b1, const void *b2, int len); ++extern void bzero(void *b, int len); ++ ++/* general purpose memory allocation */ ++#define MALLOC(size) osl_malloc((size)) ++#define MFREE(addr, size) osl_mfree((char*)(addr), (size)) ++extern void *osl_malloc(uint size); ++extern void osl_mfree(void *addr, uint size); ++ ++/* uncached virtual address */ ++#define OSL_UNCACHED(va) osl_uncached((va)) ++extern void *osl_uncached(void *va); ++ ++/* get processor cycle count */ ++#define OSL_GETCYCLES(x) ((x) = osl_getcycles()) ++extern uint osl_getcycles(void); ++ ++/* dereference an address that may target abort */ ++#define BUSPROBE(val, addr) osl_busprobe(&(val), (addr)) ++extern int osl_busprobe(uint32 *val, uint32 addr); ++ ++/* map/unmap physical to virtual */ ++#define REG_MAP(pa, size) osl_reg_map((pa), (size)) ++#define REG_UNMAP(va) osl_reg_unmap((va)) ++extern void *osl_reg_map(uint32 pa, uint size); ++extern void osl_reg_unmap(void *va); ++ ++/* allocate/free shared (dma-able) consistent (uncached) memory */ ++#define DMA_ALLOC_CONSISTENT(dev, size, pap) \ ++ osl_dma_alloc_consistent((dev), (size), (pap)) ++#define DMA_FREE_CONSISTENT(dev, va, size, pa) \ ++ osl_dma_free_consistent((dev), (void*)(va), (size), (pa)) ++extern void *osl_dma_alloc_consistent(void *dev, uint size, ulong *pap); ++extern void osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa); ++ ++/* map/unmap direction */ ++#define DMA_TX 1 ++#define DMA_RX 2 ++ ++/* map/unmap shared (dma-able) memory */ ++#define DMA_MAP(dev, va, size, direction, p) \ ++ osl_dma_map((dev), (va), (size), (direction)) ++#define DMA_UNMAP(dev, pa, size, direction, p) \ ++ osl_dma_unmap((dev), (pa), (size), (direction)) ++extern uint osl_dma_map(void *dev, void *va, uint size, int direction); ++extern void osl_dma_unmap(void *dev, uint pa, uint size, int direction); ++ ++/* microsecond delay */ ++#define OSL_DELAY(usec) osl_delay((usec)) ++extern void osl_delay(uint usec); ++ ++/* shared (dma-able) memory access macros */ ++#define R_SM(r) *(r) ++#define W_SM(r, v) (*(r) = (v)) ++#define BZERO_SM(r, len) bzero((r), (len)) ++ ++/* packet primitives */ ++#define PKTGET(drv, len, send) osl_pktget((drv), (len), (send)) ++#define PKTFREE(drv, skb, send) osl_pktfree((skb)) ++#define PKTDATA(drv, skb) osl_pktdata((drv), (skb)) ++#define PKTLEN(drv, skb) osl_pktlen((drv), (skb)) ++#define PKTNEXT(drv, skb) osl_pktnext((drv), (skb)) ++#define PKTSETNEXT(skb, x) osl_pktsetnext((skb), (x)) ++#define PKTSETLEN(drv, skb, len) osl_pktsetlen((drv), (skb), (len)) ++#define PKTPUSH(drv, skb, bytes) osl_pktpush((drv), (skb), (bytes)) ++#define PKTPULL(drv, skb, bytes) osl_pktpull((drv), (skb), (bytes)) ++#define PKTDUP(drv, skb) osl_pktdup((drv), (skb)) ++#define PKTCOOKIE(skb) osl_pktcookie((skb)) ++#define PKTSETCOOKIE(skb, x) osl_pktsetcookie((skb), (x)) ++#define PKTLINK(skb) osl_pktlink((skb)) ++#define PKTSETLINK(skb, x) osl_pktsetlink((skb), (x)) ++extern void *osl_pktget(void *drv, uint len, bool send); ++extern void osl_pktfree(void *skb); ++extern uchar *osl_pktdata(void *drv, void *skb); ++extern uint osl_pktlen(void *drv, void *skb); ++extern void *osl_pktnext(void *drv, void *skb); ++extern void osl_pktsetnext(void *skb, void *x); ++extern void osl_pktsetlen(void *drv, void *skb, uint len); ++extern uchar *osl_pktpush(void *drv, void *skb, int bytes); ++extern uchar *osl_pktpull(void *drv, void *skb, int bytes); ++extern void *osl_pktdup(void *drv, void *skb); ++extern void *osl_pktcookie(void *skb); ++extern void osl_pktsetcookie(void *skb, void *x); ++extern void *osl_pktlink(void *skb); ++extern void osl_pktsetlink(void *skb, void *x); ++ ++#endif /* BINOSL */ ++ ++#endif /* _linux_osl_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/linuxver.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/linuxver.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/linuxver.h 2005-08-28 11:12:20.441857480 +0200 +@@ -0,0 +1,326 @@ ++/* ++ * Linux-specific abstractions to gain some independence from linux kernel versions. ++ * Pave over some 2.2 versus 2.4 kernel differences. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _linuxver_h_ ++#define _linuxver_h_ ++ ++#include <linux/config.h> ++#include <linux/version.h> ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0)) ++/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */ ++#ifdef __UNDEF_NO_VERSION__ ++#undef __NO_VERSION__ ++#else ++#define __NO_VERSION__ ++#endif ++#endif ++ ++#if defined(MODULE) && defined(MODVERSIONS) ++#include <linux/modversions.h> ++#endif ++ ++/* linux/malloc.h is deprecated, use linux/slab.h instead. */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9)) ++#include <linux/malloc.h> ++#else ++#include <linux/slab.h> ++#endif ++ ++#include <linux/types.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/mm.h> ++#include <linux/string.h> ++#include <linux/pci.h> ++#include <linux/interrupt.h> ++#include <linux/netdevice.h> ++#include <asm/io.h> ++ ++#ifndef __exit ++#define __exit ++#endif ++#ifndef __devexit ++#define __devexit ++#endif ++#ifndef __devinit ++#define __devinit __init ++#endif ++#ifndef __devinitdata ++#define __devinitdata ++#endif ++#ifndef __devexit_p ++#define __devexit_p(x) x ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)) ++ ++#define pci_get_drvdata(dev) (dev)->sysdata ++#define pci_set_drvdata(dev, value) (dev)->sysdata=(value) ++ ++/* ++ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration ++ */ ++ ++struct pci_device_id { ++ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ ++ unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ ++ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ ++ unsigned long driver_data; /* Data private to the driver */ ++}; ++ ++struct pci_driver { ++ struct list_head node; ++ char *name; ++ const struct pci_device_id *id_table; /* NULL if wants all devices */ ++ int (*probe)(struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */ ++ void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */ ++ void (*suspend)(struct pci_dev *dev); /* Device suspended */ ++ void (*resume)(struct pci_dev *dev); /* Device woken up */ ++}; ++ ++#define MODULE_DEVICE_TABLE(type, name) ++#define PCI_ANY_ID (~0) ++ ++/* compatpci.c */ ++#define pci_module_init pci_register_driver ++extern int pci_register_driver(struct pci_driver *drv); ++extern void pci_unregister_driver(struct pci_driver *drv); ++ ++#endif /* PCI registration */ ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) ++#ifdef MODULE ++#define module_init(x) int init_module(void) { return x(); } ++#define module_exit(x) void cleanup_module(void) { x(); } ++#else ++#define module_init(x) __initcall(x); ++#define module_exit(x) __exitcall(x); ++#endif ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48)) ++#define list_for_each(pos, head) \ ++ for (pos = (head)->next; pos != (head); pos = pos->next) ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13)) ++#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)]) ++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44)) ++#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start) ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23)) ++#define pci_enable_device(dev) do { } while (0) ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14)) ++#define net_device device ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42)) ++ ++/* ++ * DMA mapping ++ * ++ * See linux/Documentation/DMA-mapping.txt ++ */ ++ ++#ifndef PCI_DMA_TODEVICE ++#define PCI_DMA_TODEVICE 1 ++#define PCI_DMA_FROMDEVICE 2 ++#endif ++ ++typedef u32 dma_addr_t; ++ ++/* Pure 2^n version of get_order */ ++static inline int get_order(unsigned long size) ++{ ++ int order; ++ ++ size = (size-1) >> (PAGE_SHIFT-1); ++ order = -1; ++ do { ++ size >>= 1; ++ order++; ++ } while (size); ++ return order; ++} ++ ++static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, ++ dma_addr_t *dma_handle) ++{ ++ void *ret; ++ int gfp = GFP_ATOMIC | GFP_DMA; ++ ++ ret = (void *)__get_free_pages(gfp, get_order(size)); ++ ++ if (ret != NULL) { ++ memset(ret, 0, size); ++ *dma_handle = virt_to_bus(ret); ++ } ++ return ret; ++} ++static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, ++ void *vaddr, dma_addr_t dma_handle) ++{ ++ free_pages((unsigned long)vaddr, get_order(size)); ++} ++#ifdef ILSIM ++extern uint pci_map_single(void *dev, void *va, uint size, int direction); ++extern void pci_unmap_single(void *dev, uint pa, uint size, int direction); ++#else ++#define pci_map_single(cookie, address, size, dir) virt_to_bus(address) ++#define pci_unmap_single(cookie, address, size, dir) ++#endif ++ ++#endif /* DMA mapping */ ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43)) ++ ++#define dev_kfree_skb_any(a) dev_kfree_skb(a) ++#define netif_down(dev) do { (dev)->start = 0; } while(0) ++ ++/* pcmcia-cs provides its own netdevice compatibility layer */ ++#ifndef _COMPAT_NETDEVICE_H ++ ++/* ++ * SoftNet ++ * ++ * For pre-softnet kernels we need to tell the upper layer not to ++ * re-enter start_xmit() while we are in there. However softnet ++ * guarantees not to enter while we are in there so there is no need ++ * to do the netif_stop_queue() dance unless the transmit queue really ++ * gets stuck. This should also improve performance according to tests ++ * done by Aman Singla. ++ */ ++ ++#define dev_kfree_skb_irq(a) dev_kfree_skb(a) ++#define netif_wake_queue(dev) do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0) ++#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy) ++ ++static inline void netif_start_queue(struct net_device *dev) ++{ ++ dev->tbusy = 0; ++ dev->interrupt = 0; ++ dev->start = 1; ++} ++ ++#define netif_queue_stopped(dev) (dev)->tbusy ++#define netif_running(dev) (dev)->start ++ ++#endif /* _COMPAT_NETDEVICE_H */ ++ ++#define netif_device_attach(dev) netif_start_queue(dev) ++#define netif_device_detach(dev) netif_stop_queue(dev) ++ ++/* 2.4.x renamed bottom halves to tasklets */ ++#define tasklet_struct tq_struct ++static inline void tasklet_schedule(struct tasklet_struct *tasklet) ++{ ++ queue_task(tasklet, &tq_immediate); ++ mark_bh(IMMEDIATE_BH); ++} ++ ++static inline void tasklet_init(struct tasklet_struct *tasklet, ++ void (*func)(unsigned long), ++ unsigned long data) ++{ ++ tasklet->next = NULL; ++ tasklet->sync = 0; ++ tasklet->routine = (void (*)(void *))func; ++ tasklet->data = (void *)data; ++} ++#define tasklet_kill(tasklet) {do{} while(0);} ++ ++/* 2.4.x introduced del_timer_sync() */ ++#define del_timer_sync(timer) del_timer(timer) ++ ++#else ++ ++#define netif_down(dev) ++ ++#endif /* SoftNet */ ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3)) ++ ++/* ++ * Emit code to initialise a tq_struct's routine and data pointers ++ */ ++#define PREPARE_TQUEUE(_tq, _routine, _data) \ ++ do { \ ++ (_tq)->routine = _routine; \ ++ (_tq)->data = _data; \ ++ } while (0) ++ ++/* ++ * Emit code to initialise all of a tq_struct ++ */ ++#define INIT_TQUEUE(_tq, _routine, _data) \ ++ do { \ ++ INIT_LIST_HEAD(&(_tq)->list); \ ++ (_tq)->sync = 0; \ ++ PREPARE_TQUEUE((_tq), (_routine), (_data)); \ ++ } while (0) ++ ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6)) ++ ++/* Power management related routines */ ++ ++static inline int ++pci_save_state(struct pci_dev *dev, u32 *buffer) ++{ ++ int i; ++ if (buffer) { ++ for (i = 0; i < 16; i++) ++ pci_read_config_dword(dev, i * 4,&buffer[i]); ++ } ++ return 0; ++} ++ ++static inline int ++pci_restore_state(struct pci_dev *dev, u32 *buffer) ++{ ++ int i; ++ ++ if (buffer) { ++ for (i = 0; i < 16; i++) ++ pci_write_config_dword(dev,i * 4, buffer[i]); ++ } ++ /* ++ * otherwise, write the context information we know from bootup. ++ * This works around a problem where warm-booting from Windows ++ * combined with a D3(hot)->D0 transition causes PCI config ++ * header data to be forgotten. ++ */ ++ else { ++ for (i = 0; i < 6; i ++) ++ pci_write_config_dword(dev, ++ PCI_BASE_ADDRESS_0 + (i * 4), ++ pci_resource_start(dev, i)); ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ } ++ return 0; ++} ++ ++#endif /* PCI power management */ ++ ++/* Old cp0 access macros deprecated in 2.4.19 */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19)) ++#define read_c0_count() read_32bit_cp0_register(CP0_COUNT) ++#endif ++ ++#endif /* _linuxver_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/nvports.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/nvports.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/nvports.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/nvports.h 2005-08-28 11:12:20.441857480 +0200 +@@ -0,0 +1,62 @@ ++/* ++ * Broadcom Home Gateway Reference Design ++ * Ports Web Page Configuration Support Routines ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _nvports_h_ ++#define _nvports_h_ ++ ++#define uint32 unsigned long ++#define uint16 unsigned short ++#define uint unsigned int ++#define uint8 unsigned char ++#define uint64 unsigned long long ++ ++enum FORCE_PORT { ++ FORCE_OFF, ++ FORCE_10H, ++ FORCE_10F, ++ FORCE_100H, ++ FORCE_100F, ++ FORCE_DOWN, ++ POWER_OFF ++}; ++ ++typedef struct _PORT_ATTRIBS ++{ ++ uint autoneg; ++ uint force; ++ uint native; ++} PORT_ATTRIBS; ++ ++extern uint ++nvExistsPortAttrib(char *attrib, uint portno); ++ ++extern int ++nvExistsAnyForcePortAttrib(uint portno); ++ ++extern void ++nvSetPortAttrib(char *attrib, uint portno); ++ ++extern void ++nvUnsetPortAttrib(char *attrib, uint portno); ++ ++extern void ++nvUnsetAllForcePortAttrib(uint portno); ++ ++extern PORT_ATTRIBS ++nvGetSwitchPortAttribs(uint portno); ++ ++#endif /* _nvports_h_ */ ++ ++ ++ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/osl.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/osl.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/osl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/osl.h 2005-08-28 11:12:20.441857480 +0200 +@@ -0,0 +1,38 @@ ++/* ++ * OS Independent Layer ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _osl_h_ ++#define _osl_h_ ++ ++#ifdef V2_HAL ++#include <v2hal_osl.h> ++#elif defined(linux) ++#include <linux_osl.h> ++#elif PMON ++#include <pmon_osl.h> ++#elif defined(NDIS) ++#include <ndis_osl.h> ++#elif defined(_CFE_) ++#include <cfe_osl.h> ++#elif defined(MACOS9) ++#include <macos9_osl.h> ++#elif defined(MACOSX) ++#include <macosx_osl.h> ++#else ++#error "Unsupported OSL requested" ++#endif ++ ++/* handy */ ++#define SET_REG(r, mask, val) W_REG((r), ((R_REG(r) & ~(mask)) | (val))) ++ ++#endif /* _osl_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/pcicfg.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/pcicfg.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/pcicfg.h 2005-08-28 11:12:20.442857328 +0200 +@@ -0,0 +1,362 @@ ++/* ++ * pcicfg.h: PCI configuration constants and structures. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _h_pci_ ++#define _h_pci_ ++ ++/* The following inside ifndef's so we don't collide with NTDDK.H */ ++#ifndef PCI_MAX_BUS ++#define PCI_MAX_BUS 0x100 ++#endif ++#ifndef PCI_MAX_DEVICES ++#define PCI_MAX_DEVICES 0x20 ++#endif ++#ifndef PCI_MAX_FUNCTION ++#define PCI_MAX_FUNCTION 0x8 ++#endif ++ ++#ifndef PCI_INVALID_VENDORID ++#define PCI_INVALID_VENDORID 0xffff ++#endif ++#ifndef PCI_INVALID_DEVICEID ++#define PCI_INVALID_DEVICEID 0xffff ++#endif ++ ++ ++/* Convert between bus-slot-function-register and config addresses */ ++ ++#define PCICFG_BUS_SHIFT 16 /* Bus shift */ ++#define PCICFG_SLOT_SHIFT 11 /* Slot shift */ ++#define PCICFG_FUN_SHIFT 8 /* Function shift */ ++#define PCICFG_OFF_SHIFT 0 /* Bus shift */ ++ ++#define PCICFG_BUS_MASK 0xff /* Bus mask */ ++#define PCICFG_SLOT_MASK 0x1f /* Slot mask */ ++#define PCICFG_FUN_MASK 7 /* Function mask */ ++#define PCICFG_OFF_MASK 0xff /* Bus mask */ ++ ++#define PCI_CONFIG_ADDR(b, s, f, o) \ ++ ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \ ++ | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \ ++ | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \ ++ | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT)) ++ ++#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK) ++#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK) ++#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK) ++#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK) ++ ++ ++/* The actual config space */ ++ ++#define PCI_BAR_MAX 6 ++ ++#define PCI_ROM_BAR 8 ++ ++#define PCR_RSVDA_MAX 2 ++ ++typedef struct _pci_config_regs { ++ unsigned short vendor; ++ unsigned short device; ++ unsigned short command; ++ unsigned short status; ++ unsigned char rev_id; ++ unsigned char prog_if; ++ unsigned char sub_class; ++ unsigned char base_class; ++ unsigned char cache_line_size; ++ unsigned char latency_timer; ++ unsigned char header_type; ++ unsigned char bist; ++ unsigned long base[PCI_BAR_MAX]; ++ unsigned long cardbus_cis; ++ unsigned short subsys_vendor; ++ unsigned short subsys_id; ++ unsigned long baserom; ++ unsigned long rsvd_a[PCR_RSVDA_MAX]; ++ unsigned char int_line; ++ unsigned char int_pin; ++ unsigned char min_gnt; ++ unsigned char max_lat; ++ unsigned char dev_dep[192]; ++} pci_config_regs; ++ ++#define SZPCR (sizeof (pci_config_regs)) ++#define MINSZPCR 64 /* offsetof (dev_dep[0] */ ++ ++/* A structure for the config registers is nice, but in most ++ * systems the config space is not memory mapped, so we need ++ * filed offsetts. :-( ++ */ ++#define PCI_CFG_VID 0 ++#define PCI_CFG_DID 2 ++#define PCI_CFG_CMD 4 ++#define PCI_CFG_STAT 6 ++#define PCI_CFG_REV 8 ++#define PCI_CFG_PROGIF 9 ++#define PCI_CFG_SUBCL 0xa ++#define PCI_CFG_BASECL 0xb ++#define PCI_CFG_CLSZ 0xc ++#define PCI_CFG_LATTIM 0xd ++#define PCI_CFG_HDR 0xe ++#define PCI_CFG_BIST 0xf ++#define PCI_CFG_BAR0 0x10 ++#define PCI_CFG_BAR1 0x14 ++#define PCI_CFG_BAR2 0x18 ++#define PCI_CFG_BAR3 0x1c ++#define PCI_CFG_BAR4 0x20 ++#define PCI_CFG_BAR5 0x24 ++#define PCI_CFG_CIS 0x28 ++#define PCI_CFG_SVID 0x2c ++#define PCI_CFG_SSID 0x2e ++#define PCI_CFG_ROMBAR 0x30 ++#define PCI_CFG_INT 0x3c ++#define PCI_CFG_PIN 0x3d ++#define PCI_CFG_MINGNT 0x3e ++#define PCI_CFG_MAXLAT 0x3f ++ ++/* Classes and subclasses */ ++ ++typedef enum { ++ PCI_CLASS_OLD = 0, ++ PCI_CLASS_DASDI, ++ PCI_CLASS_NET, ++ PCI_CLASS_DISPLAY, ++ PCI_CLASS_MMEDIA, ++ PCI_CLASS_MEMORY, ++ PCI_CLASS_BRIDGE, ++ PCI_CLASS_COMM, ++ PCI_CLASS_BASE, ++ PCI_CLASS_INPUT, ++ PCI_CLASS_DOCK, ++ PCI_CLASS_CPU, ++ PCI_CLASS_SERIAL, ++ PCI_CLASS_INTELLIGENT = 0xe, ++ PCI_CLASS_SATELLITE, ++ PCI_CLASS_CRYPT, ++ PCI_CLASS_DSP, ++ PCI_CLASS_MAX ++} pci_classes; ++ ++typedef enum { ++ PCI_DASDI_SCSI, ++ PCI_DASDI_IDE, ++ PCI_DASDI_FLOPPY, ++ PCI_DASDI_IPI, ++ PCI_DASDI_RAID, ++ PCI_DASDI_OTHER = 0x80 ++} pci_dasdi_subclasses; ++ ++typedef enum { ++ PCI_NET_ETHER, ++ PCI_NET_TOKEN, ++ PCI_NET_FDDI, ++ PCI_NET_ATM, ++ PCI_NET_OTHER = 0x80 ++} pci_net_subclasses; ++ ++typedef enum { ++ PCI_DISPLAY_VGA, ++ PCI_DISPLAY_XGA, ++ PCI_DISPLAY_3D, ++ PCI_DISPLAY_OTHER = 0x80 ++} pci_display_subclasses; ++ ++typedef enum { ++ PCI_MMEDIA_VIDEO, ++ PCI_MMEDIA_AUDIO, ++ PCI_MMEDIA_PHONE, ++ PCI_MEDIA_OTHER = 0x80 ++} pci_mmedia_subclasses; ++ ++typedef enum { ++ PCI_MEMORY_RAM, ++ PCI_MEMORY_FLASH, ++ PCI_MEMORY_OTHER = 0x80 ++} pci_memory_subclasses; ++ ++typedef enum { ++ PCI_BRIDGE_HOST, ++ PCI_BRIDGE_ISA, ++ PCI_BRIDGE_EISA, ++ PCI_BRIDGE_MC, ++ PCI_BRIDGE_PCI, ++ PCI_BRIDGE_PCMCIA, ++ PCI_BRIDGE_NUBUS, ++ PCI_BRIDGE_CARDBUS, ++ PCI_BRIDGE_RACEWAY, ++ PCI_BRIDGE_OTHER = 0x80 ++} pci_bridge_subclasses; ++ ++typedef enum { ++ PCI_COMM_UART, ++ PCI_COMM_PARALLEL, ++ PCI_COMM_MULTIUART, ++ PCI_COMM_MODEM, ++ PCI_COMM_OTHER = 0x80 ++} pci_comm_subclasses; ++ ++typedef enum { ++ PCI_BASE_PIC, ++ PCI_BASE_DMA, ++ PCI_BASE_TIMER, ++ PCI_BASE_RTC, ++ PCI_BASE_PCI_HOTPLUG, ++ PCI_BASE_OTHER = 0x80 ++} pci_base_subclasses; ++ ++typedef enum { ++ PCI_INPUT_KBD, ++ PCI_INPUT_PEN, ++ PCI_INPUT_MOUSE, ++ PCI_INPUT_SCANNER, ++ PCI_INPUT_GAMEPORT, ++ PCI_INPUT_OTHER = 0x80 ++} pci_input_subclasses; ++ ++typedef enum { ++ PCI_DOCK_GENERIC, ++ PCI_DOCK_OTHER = 0x80 ++} pci_dock_subclasses; ++ ++typedef enum { ++ PCI_CPU_386, ++ PCI_CPU_486, ++ PCI_CPU_PENTIUM, ++ PCI_CPU_ALPHA = 0x10, ++ PCI_CPU_POWERPC = 0x20, ++ PCI_CPU_MIPS = 0x30, ++ PCI_CPU_COPROC = 0x40, ++ PCI_CPU_OTHER = 0x80 ++} pci_cpu_subclasses; ++ ++typedef enum { ++ PCI_SERIAL_IEEE1394, ++ PCI_SERIAL_ACCESS, ++ PCI_SERIAL_SSA, ++ PCI_SERIAL_USB, ++ PCI_SERIAL_FIBER, ++ PCI_SERIAL_SMBUS, ++ PCI_SERIAL_OTHER = 0x80 ++} pci_serial_subclasses; ++ ++typedef enum { ++ PCI_INTELLIGENT_I2O, ++} pci_intelligent_subclasses; ++ ++typedef enum { ++ PCI_SATELLITE_TV, ++ PCI_SATELLITE_AUDIO, ++ PCI_SATELLITE_VOICE, ++ PCI_SATELLITE_DATA, ++ PCI_SATELLITE_OTHER = 0x80 ++} pci_satellite_subclasses; ++ ++typedef enum { ++ PCI_CRYPT_NETWORK, ++ PCI_CRYPT_ENTERTAINMENT, ++ PCI_CRYPT_OTHER = 0x80 ++} pci_crypt_subclasses; ++ ++typedef enum { ++ PCI_DSP_DPIO, ++ PCI_DSP_OTHER = 0x80 ++} pci_dsp_subclasses; ++ ++/* Header types */ ++typedef enum { ++ PCI_HEADER_NORMAL, ++ PCI_HEADER_BRIDGE, ++ PCI_HEADER_CARDBUS ++} pci_header_types; ++ ++ ++/* Overlay for a PCI-to-PCI bridge */ ++ ++#define PPB_RSVDA_MAX 2 ++#define PPB_RSVDD_MAX 8 ++ ++typedef struct _ppb_config_regs { ++ unsigned short vendor; ++ unsigned short device; ++ unsigned short command; ++ unsigned short status; ++ unsigned char rev_id; ++ unsigned char prog_if; ++ unsigned char sub_class; ++ unsigned char base_class; ++ unsigned char cache_line_size; ++ unsigned char latency_timer; ++ unsigned char header_type; ++ unsigned char bist; ++ unsigned long rsvd_a[PPB_RSVDA_MAX]; ++ unsigned char prim_bus; ++ unsigned char sec_bus; ++ unsigned char sub_bus; ++ unsigned char sec_lat; ++ unsigned char io_base; ++ unsigned char io_lim; ++ unsigned short sec_status; ++ unsigned short mem_base; ++ unsigned short mem_lim; ++ unsigned short pf_mem_base; ++ unsigned short pf_mem_lim; ++ unsigned long pf_mem_base_hi; ++ unsigned long pf_mem_lim_hi; ++ unsigned short io_base_hi; ++ unsigned short io_lim_hi; ++ unsigned short subsys_vendor; ++ unsigned short subsys_id; ++ unsigned long rsvd_b; ++ unsigned char rsvd_c; ++ unsigned char int_pin; ++ unsigned short bridge_ctrl; ++ unsigned char chip_ctrl; ++ unsigned char diag_ctrl; ++ unsigned short arb_ctrl; ++ unsigned long rsvd_d[PPB_RSVDD_MAX]; ++ unsigned char dev_dep[192]; ++} ppb_config_regs; ++ ++/* Eveything below is BRCM HND proprietary */ ++ ++#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */ ++#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */ ++#define PCI_SPROM_CONTROL 0x88 /* sprom property control */ ++#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */ ++#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */ ++#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */ ++#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */ ++#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */ ++#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address register */ ++#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */ ++#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */ ++#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */ ++ ++#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */ ++#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */ ++ ++/* PCI_INT_MASK */ ++#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */ ++#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */ ++ ++/* PCI_SPROM_CONTROL */ ++#define SPROM_BLANK 0x04 /* indicating a blank sprom */ ++#define SPROM_WRITEEN 0x10 /* sprom write enable */ ++#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */ ++ ++#define SPROM_SIZE 256 /* sprom size in 16-bit */ ++#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */ ++ ++#endif +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/proto/802.11.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/proto/802.11.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/proto/802.11.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/proto/802.11.h 2005-08-28 11:12:20.450856112 +0200 +@@ -0,0 +1,679 @@ ++/* ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * Fundamental types and constants relating to 802.11 ++ * ++ * $Id$ ++ */ ++ ++#ifndef _802_11_H_ ++#define _802_11_H_ ++ ++#ifndef _TYPEDEFS_H_ ++#include <typedefs.h> ++#endif ++ ++#ifndef _NET_ETHERNET_H_ ++#include <proto/ethernet.h> ++#endif ++ ++/* enable structure packing */ ++#if !defined(__GNUC__) ++#pragma pack(1) ++#endif ++ ++/* some platforms require stronger medicine */ ++#if defined(__GNUC__) ++#define PACKED __attribute__((packed)) ++#else ++#define PACKED ++#endif ++ ++ ++#define DOT11_TU_TO_US 1024 /* 802.11 Time Unit is 1024 microseconds */ ++ ++/* Generic 802.11 frame constants */ ++#define DOT11_A3_HDR_LEN 24 ++#define DOT11_A4_HDR_LEN 30 ++#define DOT11_MAC_HDR_LEN DOT11_A3_HDR_LEN ++#define DOT11_FCS_LEN 4 ++#define DOT11_ICV_LEN 4 ++#define DOT11_ICV_AES_LEN 8 ++ ++ ++#define DOT11_KEY_INDEX_SHIFT 6 ++#define DOT11_IV_LEN 4 ++#define DOT11_IV_TKIP_LEN 8 ++#define DOT11_IV_AES_OCB_LEN 4 ++#define DOT11_IV_AES_CCM_LEN 8 ++ ++#define DOT11_MAX_MPDU_BODY_LEN 2312 ++#define DOT11_MAX_MPDU_LEN 2346 /* body len + A4 hdr + FCS */ ++#define DOT11_MAX_SSID_LEN 32 ++ ++/* dot11RTSThreshold */ ++#define DOT11_DEFAULT_RTS_LEN 2347 ++#define DOT11_MAX_RTS_LEN 2347 ++ ++/* dot11FragmentationThreshold */ ++#define DOT11_MIN_FRAG_LEN 256 ++#define DOT11_MAX_FRAG_LEN 2346 /* Max frag is also limited by aMPDUMaxLength of the attached PHY */ ++#define DOT11_DEFAULT_FRAG_LEN 2346 ++ ++/* dot11BeaconPeriod */ ++#define DOT11_MIN_BEACON_PERIOD 1 ++#define DOT11_MAX_BEACON_PERIOD 0xFFFF ++ ++/* dot11DTIMPeriod */ ++#define DOT11_MIN_DTIM_PERIOD 1 ++#define DOT11_MAX_DTIM_PERIOD 0xFF ++ ++/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */ ++#define DOT11_LLC_SNAP_HDR_LEN 8 ++#define DOT11_OUI_LEN 3 ++struct dot11_llc_snap_header { ++ uint8 dsap; /* always 0xAA */ ++ uint8 ssap; /* always 0xAA */ ++ uint8 ctl; /* always 0x03 */ ++ uint8 oui[DOT11_OUI_LEN]; /* RFC1042: 0x00 0x00 0x00 ++ Bridge-Tunnel: 0x00 0x00 0xF8 */ ++ uint16 type; /* ethertype */ ++} PACKED; ++ ++/* RFC1042 header used by 802.11 per 802.1H */ ++#define RFC1042_HDR_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN) ++ ++/* Generic 802.11 MAC header */ ++/* ++ * N.B.: This struct reflects the full 4 address 802.11 MAC header. ++ * The fields are defined such that the shorter 1, 2, and 3 ++ * address headers just use the first k fields. ++ */ ++struct dot11_header { ++ uint16 fc; /* frame control */ ++ uint16 durid; /* duration/ID */ ++ struct ether_addr a1; /* address 1 */ ++ struct ether_addr a2; /* address 2 */ ++ struct ether_addr a3; /* address 3 */ ++ uint16 seq; /* sequence control */ ++ struct ether_addr a4; /* address 4 */ ++} PACKED; ++ ++/* Control frames */ ++ ++struct dot11_rts_frame { ++ uint16 fc; /* frame control */ ++ uint16 durid; /* duration/ID */ ++ struct ether_addr ra; /* receiver address */ ++ struct ether_addr ta; /* transmitter address */ ++} PACKED; ++#define DOT11_RTS_LEN 16 ++ ++struct dot11_cts_frame { ++ uint16 fc; /* frame control */ ++ uint16 durid; /* duration/ID */ ++ struct ether_addr ra; /* receiver address */ ++} PACKED; ++#define DOT11_CTS_LEN 10 ++ ++struct dot11_ack_frame { ++ uint16 fc; /* frame control */ ++ uint16 durid; /* duration/ID */ ++ struct ether_addr ra; /* receiver address */ ++} PACKED; ++#define DOT11_ACK_LEN 10 ++ ++struct dot11_ps_poll_frame { ++ uint16 fc; /* frame control */ ++ uint16 durid; /* AID */ ++ struct ether_addr bssid; /* receiver address, STA in AP */ ++ struct ether_addr ta; /* transmitter address */ ++} PACKED; ++#define DOT11_PS_POLL_LEN 16 ++ ++struct dot11_cf_end_frame { ++ uint16 fc; /* frame control */ ++ uint16 durid; /* duration/ID */ ++ struct ether_addr ra; /* receiver address */ ++ struct ether_addr bssid; /* transmitter address, STA in AP */ ++} PACKED; ++#define DOT11_CS_END_LEN 16 ++ ++/* Management frame header */ ++struct dot11_management_header { ++ uint16 fc; /* frame control */ ++ uint16 durid; /* duration/ID */ ++ struct ether_addr da; /* receiver address */ ++ struct ether_addr sa; /* transmitter address */ ++ struct ether_addr bssid; /* BSS ID */ ++ uint16 seq; /* sequence control */ ++} PACKED; ++#define DOT11_MGMT_HDR_LEN 24 ++ ++/* Management frame payloads */ ++ ++struct dot11_bcn_prb { ++ uint32 timestamp[2]; ++ uint16 beacon_interval; ++ uint16 capability; ++} PACKED; ++#define DOT11_BCN_PRB_LEN 12 ++ ++struct dot11_auth { ++ uint16 alg; /* algorithm */ ++ uint16 seq; /* sequence control */ ++ uint16 status; /* status code */ ++} PACKED; ++#define DOT11_AUTH_FIXED_LEN 6 /* length of auth frame without challenge info elt */ ++ ++struct dot11_assoc_req { ++ uint16 capability; /* capability information */ ++ uint16 listen; /* listen interval */ ++} PACKED; ++ ++struct dot11_assoc_resp { ++ uint16 capability; /* capability information */ ++ uint16 status; /* status code */ ++ uint16 aid; /* association ID */ ++} PACKED; ++ ++struct dot11_action_measure { ++ uint8 category; ++ uint8 action; ++ uint8 token; ++ uint8 data[1]; ++} PACKED; ++#define DOT11_ACTION_MEASURE_LEN 3 ++ ++/************** ++ 802.11h related definitions. ++**************/ ++typedef struct { ++ uint8 id; ++ uint8 len; ++ uint8 power; ++} dot11_power_cnst_t; ++ ++typedef struct { ++ uint8 min; ++ uint8 max; ++} dot11_power_cap_t; ++ ++typedef struct { ++ uint8 id; ++ uint8 len; ++ uint8 tx_pwr; ++ uint8 margin; ++} dot11_tpc_rep_t; ++#define DOT11_MNG_IE_TPC_REPORT_LEN 2 /* length of IE data, not including 2 byte header */ ++ ++typedef struct { ++ uint8 id; ++ uint8 len; ++ uint8 first_channel; ++ uint8 num_channels; ++} dot11_supp_channels_t; ++ ++struct dot11_channel_switch { ++ uint8 id; ++ uint8 len; ++ uint8 mode; ++ uint8 channel; ++ uint8 count; ++} PACKED; ++typedef struct dot11_channel_switch dot11_channel_switch_t; ++ ++/* 802.11h Measurement Request/Report IEs */ ++/* Measurement Type field */ ++#define DOT11_MEASURE_TYPE_BASIC 0 ++#define DOT11_MEASURE_TYPE_CCA 1 ++#define DOT11_MEASURE_TYPE_RPI 2 ++ ++/* Measurement Mode field */ ++ ++/* Measurement Request Modes */ ++#define DOT11_MEASURE_MODE_ENABLE (1<<1) ++#define DOT11_MEASURE_MODE_REQUEST (1<<2) ++#define DOT11_MEASURE_MODE_REPORT (1<<3) ++/* Measurement Report Modes */ ++#define DOT11_MEASURE_MODE_LATE (1<<0) ++#define DOT11_MEASURE_MODE_INCAPABLE (1<<1) ++#define DOT11_MEASURE_MODE_REFUSED (1<<2) ++/* Basic Measurement Map bits */ ++#define DOT11_MEASURE_BASIC_MAP_BSS ((uint8)(1<<0)) ++#define DOT11_MEASURE_BASIC_MAP_OFDM ((uint8)(1<<1)) ++#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2)) ++#define DOT11_MEASURE_BASIC_MAP_RADAR ((uint8)(1<<3)) ++#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4)) ++ ++typedef struct { ++ uint8 id; ++ uint8 len; ++ uint8 token; ++ uint8 mode; ++ uint8 type; ++ uint8 channel; ++ uint8 start_time[8]; ++ uint16 duration; ++} dot11_meas_req_t; ++#define DOT11_MNG_IE_MREQ_LEN 14 ++/* length of Measure Request IE data not including variable len */ ++#define DOT11_MNG_IE_MREQ_FIXED_LEN 3 ++ ++struct dot11_meas_rep { ++ uint8 id; ++ uint8 len; ++ uint8 token; ++ uint8 mode; ++ uint8 type; ++ union ++ { ++ struct { ++ uint8 channel; ++ uint8 start_time[8]; ++ uint16 duration; ++ uint8 map; ++ } PACKED basic; ++ uint8 data[1]; ++ } PACKED rep; ++} PACKED; ++typedef struct dot11_meas_rep dot11_meas_rep_t; ++ ++/* length of Measure Report IE data not including variable len */ ++#define DOT11_MNG_IE_MREP_FIXED_LEN 3 ++ ++struct dot11_meas_rep_basic { ++ uint8 channel; ++ uint8 start_time[8]; ++ uint16 duration; ++ uint8 map; ++} PACKED; ++typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t; ++#define DOT11_MEASURE_BASIC_REP_LEN 12 ++ ++struct dot11_quiet { ++ uint8 id; ++ uint8 len; ++ uint8 count; /* TBTTs until beacon interval in quiet starts */ ++ uint8 period; /* Beacon intervals between periodic quiet periods ? */ ++ uint16 duration;/* Length of quiet period, in TU's */ ++ uint16 offset; /* TU's offset from TBTT in Count field */ ++} PACKED; ++typedef struct dot11_quiet dot11_quiet_t; ++ ++typedef struct { ++ uint8 channel; ++ uint8 map; ++} chan_map_tuple_t; ++ ++typedef struct { ++ uint8 id; ++ uint8 len; ++ uint8 eaddr[ETHER_ADDR_LEN]; ++ uint8 interval; ++ chan_map_tuple_t map[1]; ++} dot11_ibss_dfs_t; ++ ++ ++/* Macro to take a pointer to a beacon or probe response ++ * header and return the char* pointer to the SSID info element ++ */ ++#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN) ++ ++/* Authentication frame payload constants */ ++#define DOT11_OPEN_SYSTEM 0 ++#define DOT11_SHARED_KEY 1 ++#define DOT11_CHALLENGE_LEN 128 ++ ++/* Frame control macros */ ++#define FC_PVER_MASK 0x3 ++#define FC_PVER_SHIFT 0 ++#define FC_TYPE_MASK 0xC ++#define FC_TYPE_SHIFT 2 ++#define FC_SUBTYPE_MASK 0xF0 ++#define FC_SUBTYPE_SHIFT 4 ++#define FC_TODS 0x100 ++#define FC_TODS_SHIFT 8 ++#define FC_FROMDS 0x200 ++#define FC_FROMDS_SHIFT 9 ++#define FC_MOREFRAG 0x400 ++#define FC_MOREFRAG_SHIFT 10 ++#define FC_RETRY 0x800 ++#define FC_RETRY_SHIFT 11 ++#define FC_PM 0x1000 ++#define FC_PM_SHIFT 12 ++#define FC_MOREDATA 0x2000 ++#define FC_MOREDATA_SHIFT 13 ++#define FC_WEP 0x4000 ++#define FC_WEP_SHIFT 14 ++#define FC_ORDER 0x8000 ++#define FC_ORDER_SHIFT 15 ++ ++/* sequence control macros */ ++#define SEQNUM_SHIFT 4 ++#define FRAGNUM_MASK 0xF ++ ++/* Frame Control type/subtype defs */ ++ ++/* FC Types */ ++#define FC_TYPE_MNG 0 ++#define FC_TYPE_CTL 1 ++#define FC_TYPE_DATA 2 ++ ++/* Management Subtypes */ ++#define FC_SUBTYPE_ASSOC_REQ 0 ++#define FC_SUBTYPE_ASSOC_RESP 1 ++#define FC_SUBTYPE_REASSOC_REQ 2 ++#define FC_SUBTYPE_REASSOC_RESP 3 ++#define FC_SUBTYPE_PROBE_REQ 4 ++#define FC_SUBTYPE_PROBE_RESP 5 ++#define FC_SUBTYPE_BEACON 8 ++#define FC_SUBTYPE_ATIM 9 ++#define FC_SUBTYPE_DISASSOC 10 ++#define FC_SUBTYPE_AUTH 11 ++#define FC_SUBTYPE_DEAUTH 12 ++#define FC_SUBTYPE_ACTION 13 ++ ++/* Control Subtypes */ ++#define FC_SUBTYPE_PS_POLL 10 ++#define FC_SUBTYPE_RTS 11 ++#define FC_SUBTYPE_CTS 12 ++#define FC_SUBTYPE_ACK 13 ++#define FC_SUBTYPE_CF_END 14 ++#define FC_SUBTYPE_CF_END_ACK 15 ++ ++/* Data Subtypes */ ++#define FC_SUBTYPE_DATA 0 ++#define FC_SUBTYPE_DATA_CF_ACK 1 ++#define FC_SUBTYPE_DATA_CF_POLL 2 ++#define FC_SUBTYPE_DATA_CF_ACK_POLL 3 ++#define FC_SUBTYPE_NULL 4 ++#define FC_SUBTYPE_CF_ACK 5 ++#define FC_SUBTYPE_CF_POLL 6 ++#define FC_SUBTYPE_CF_ACK_POLL 7 ++ ++/* type-subtype combos */ ++#define FC_KIND_MASK (FC_TYPE_MASK | FC_SUBTYPE_MASK) ++ ++#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT)) ++ ++#define FC_ASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ) ++#define FC_ASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP) ++#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ) ++#define FC_REASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP) ++#define FC_PROBE_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ) ++#define FC_PROBE_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP) ++#define FC_BEACON FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON) ++#define FC_DISASSOC FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC) ++#define FC_AUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH) ++#define FC_DEAUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH) ++#define FC_ACTION FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION) ++ ++#define FC_PS_POLL FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL) ++#define FC_RTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS) ++#define FC_CTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS) ++#define FC_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK) ++#define FC_CF_END FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END) ++#define FC_CF_END_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK) ++ ++#define FC_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA) ++#define FC_NULL_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL) ++#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK) ++ ++/* Management Frames */ ++ ++/* Management Frame Constants */ ++ ++/* Fixed fields */ ++#define DOT11_MNG_AUTH_ALGO_LEN 2 ++#define DOT11_MNG_AUTH_SEQ_LEN 2 ++#define DOT11_MNG_BEACON_INT_LEN 2 ++#define DOT11_MNG_CAP_LEN 2 ++#define DOT11_MNG_AP_ADDR_LEN 6 ++#define DOT11_MNG_LISTEN_INT_LEN 2 ++#define DOT11_MNG_REASON_LEN 2 ++#define DOT11_MNG_AID_LEN 2 ++#define DOT11_MNG_STATUS_LEN 2 ++#define DOT11_MNG_TIMESTAMP_LEN 8 ++ ++/* DUR/ID field in assoc resp is 0xc000 | AID */ ++#define DOT11_AID_MASK 0x3fff ++ ++/* Reason Codes */ ++#define DOT11_RC_RESERVED 0 ++#define DOT11_RC_UNSPECIFIED 1 /* Unspecified reason */ ++#define DOT11_RC_AUTH_INVAL 2 /* Previous authentication no longer valid */ ++#define DOT11_RC_DEAUTH_LEAVING 3 /* Deauthenticated because sending station is ++ leaving (or has left) IBSS or ESS */ ++#define DOT11_RC_INACTIVITY 4 /* Disassociated due to inactivity */ ++#define DOT11_RC_BUSY 5 /* Disassociated because AP is unable to handle ++ all currently associated stations */ ++#define DOT11_RC_INVAL_CLASS_2 6 /* Class 2 frame received from ++ nonauthenticated station */ ++#define DOT11_RC_INVAL_CLASS_3 7 /* Class 3 frame received from ++ nonassociated station */ ++#define DOT11_RC_DISASSOC_LEAVING 8 /* Disassociated because sending station is ++ leaving (or has left) BSS */ ++#define DOT11_RC_NOT_AUTH 9 /* Station requesting (re)association is ++ not authenticated with responding station */ ++#define DOT11_RC_MAX 23 /* Reason codes > 23 are reserved */ ++ ++/* Status Codes */ ++#define DOT11_STATUS_SUCCESS 0 /* Successful */ ++#define DOT11_STATUS_FAILURE 1 /* Unspecified failure */ ++#define DOT11_STATUS_CAP_MISMATCH 10 /* Cannot support all requested capabilities ++ in the Capability Information field */ ++#define DOT11_STATUS_REASSOC_FAIL 11 /* Reassociation denied due to inability to ++ confirm that association exists */ ++#define DOT11_STATUS_ASSOC_FAIL 12 /* Association denied due to reason outside ++ the scope of this standard */ ++#define DOT11_STATUS_AUTH_MISMATCH 13 /* Responding station does not support the ++ specified authentication algorithm */ ++#define DOT11_STATUS_AUTH_SEQ 14 /* Received an Authentication frame with ++ authentication transaction sequence number ++ out of expected sequence */ ++#define DOT11_STATUS_AUTH_CHALLENGE_FAIL 15 /* Authentication rejected because of challenge failure */ ++#define DOT11_STATUS_AUTH_TIMEOUT 16 /* Authentication rejected due to timeout waiting ++ for next frame in sequence */ ++#define DOT11_STATUS_ASSOC_BUSY_FAIL 17 /* Association denied because AP is unable to ++ handle additional associated stations */ ++#define DOT11_STATUS_ASSOC_RATE_MISMATCH 18 /* Association denied due to requesting station ++ not supporting all of the data rates in the ++ BSSBasicRateSet parameter */ ++#define DOT11_STATUS_ASSOC_SHORT_REQUIRED 19 /* Association denied due to requesting station ++ not supporting the Short Preamble option */ ++#define DOT11_STATUS_ASSOC_PBCC_REQUIRED 20 /* Association denied due to requesting station ++ not supporting the PBCC Modulation option */ ++#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED 21 /* Association denied due to requesting station ++ not supporting the Channel Agility option */ ++#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED 22 /* Association denied because Spectrum Management ++ capability is required. */ ++#define DOT11_STATUS_ASSOC_BAD_POWER_CAP 23 /* Association denied because the info in the ++ Power Cap element is unacceptable. */ ++#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS 24 /* Association denied because the info in the ++ Supported Channel element is unacceptable */ ++#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED 25 /* Association denied due to requesting station ++ not supporting the Short Slot Time option */ ++#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED 26 /* Association denied due to requesting station ++ not supporting the ER-PBCC Modulation option */ ++#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED 27 /* Association denied due to requesting station ++ not supporting the DSS-OFDM option */ ++ ++/* Info Elts, length of INFORMATION portion of Info Elts */ ++#define DOT11_MNG_DS_PARAM_LEN 1 ++#define DOT11_MNG_IBSS_PARAM_LEN 2 ++ ++/* TIM Info element has 3 bytes fixed info in INFORMATION field, ++ * followed by 1 to 251 bytes of Partial Virtual Bitmap */ ++#define DOT11_MNG_TIM_FIXED_LEN 3 ++#define DOT11_MNG_TIM_DTIM_COUNT 0 ++#define DOT11_MNG_TIM_DTIM_PERIOD 1 ++#define DOT11_MNG_TIM_BITMAP_CTL 2 ++#define DOT11_MNG_TIM_PVB 3 ++ ++/* TLV defines */ ++#define TLV_TAG_OFF 0 ++#define TLV_LEN_OFF 1 ++#define TLV_HDR_LEN 2 ++#define TLV_BODY_OFF 2 ++ ++/* Management Frame Information Element IDs */ ++#define DOT11_MNG_SSID_ID 0 ++#define DOT11_MNG_RATES_ID 1 ++#define DOT11_MNG_FH_PARMS_ID 2 ++#define DOT11_MNG_DS_PARMS_ID 3 ++#define DOT11_MNG_CF_PARMS_ID 4 ++#define DOT11_MNG_TIM_ID 5 ++#define DOT11_MNG_IBSS_PARMS_ID 6 ++#define DOT11_MNG_COUNTRY_ID 7 ++#define DOT11_MNG_HOPPING_PARMS_ID 8 ++#define DOT11_MNG_HOPPING_TABLE_ID 9 ++#define DOT11_MNG_REQUEST_ID 10 ++#define DOT11_MNG_CHALLENGE_ID 16 ++#define DOT11_MNG_PWR_CONSTRAINT_ID 32 /* 11H PowerConstraint */ ++#define DOT11_MNG_PWR_CAP_ID 33 /* 11H PowerCapability */ ++#define DOT11_MNG_TPC_REQUEST_ID 34 /* 11H TPC Request */ ++#define DOT11_MNG_TPC_REPORT_ID 35 /* 11H TPC Report */ ++#define DOT11_MNG_SUPP_CHANNELS_ID 36 /* 11H Supported Channels */ ++#define DOT11_MNG_CHANNEL_SWITCH_ID 37 /* 11H ChannelSwitch Announcement*/ ++#define DOT11_MNG_MEASURE_REQUEST_ID 38 /* 11H MeasurementRequest */ ++#define DOT11_MNG_MEASURE_REPORT_ID 39 /* 11H MeasurementReport */ ++#define DOT11_MNG_QUIET_ID 40 /* 11H Quiet */ ++#define DOT11_MNG_IBSS_DFS_ID 41 /* 11H IBSS_DFS */ ++#define DOT11_MNG_ERP_ID 42 ++#define DOT11_MNG_NONERP_ID 47 ++#define DOT11_MNG_EXT_RATES_ID 50 ++#define DOT11_MNG_WPA_ID 221 ++#define DOT11_MNG_PROPR_ID 221 ++ ++/* ERP info element bit values */ ++#define DOT11_MNG_ERP_LEN 1 /* ERP is currently 1 byte long */ ++#define DOT11_MNG_NONERP_PRESENT 0x01 /* NonERP (802.11b) STAs are present in the BSS */ ++#define DOT11_MNG_USE_PROTECTION 0x02 /* Use protection mechanisms for ERP-OFDM frames */ ++#define DOT11_MNG_BARKER_PREAMBLE 0x04 /* Short Preambles: 0 == allowed, 1 == not allowed */ ++ ++/* Capability Information Field */ ++#define DOT11_CAP_ESS 0x0001 ++#define DOT11_CAP_IBSS 0x0002 ++#define DOT11_CAP_POLLABLE 0x0004 ++#define DOT11_CAP_POLL_RQ 0x0008 ++#define DOT11_CAP_PRIVACY 0x0010 ++#define DOT11_CAP_SHORT 0x0020 ++#define DOT11_CAP_PBCC 0x0040 ++#define DOT11_CAP_AGILITY 0x0080 ++#define DOT11_CAP_SPECTRUM 0x0100 ++#define DOT11_CAP_SHORTSLOT 0x0400 ++#define DOT11_CAP_CCK_OFDM 0x2000 ++ ++/* Action Frame Constants */ ++#define DOT11_ACTION_CAT_ERR_MASK 0x10 ++#define DOT11_ACTION_CAT_SPECT_MNG 0x00 ++ ++#define DOT11_ACTION_ID_M_REQ 0 ++#define DOT11_ACTION_ID_M_REP 1 ++#define DOT11_ACTION_ID_TPC_REQ 2 ++#define DOT11_ACTION_ID_TPC_REP 3 ++#define DOT11_ACTION_ID_CHANNEL_SWITCH 4 ++ ++/* MLME Enumerations */ ++#define DOT11_BSSTYPE_INFRASTRUCTURE 0 ++#define DOT11_BSSTYPE_INDEPENDENT 1 ++#define DOT11_BSSTYPE_ANY 2 ++#define DOT11_SCANTYPE_ACTIVE 0 ++#define DOT11_SCANTYPE_PASSIVE 1 ++ ++/* 802.11 A PHY constants */ ++#define APHY_SLOT_TIME 9 ++#define APHY_SIFS_TIME 16 ++#define APHY_DIFS_TIME (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME)) ++#define APHY_PREAMBLE_TIME 16 ++#define APHY_SIGNAL_TIME 4 ++#define APHY_SYMBOL_TIME 4 ++#define APHY_SERVICE_NBITS 16 ++#define APHY_TAIL_NBITS 6 ++#define APHY_CWMIN 15 ++ ++/* 802.11 B PHY constants */ ++#define BPHY_SLOT_TIME 20 ++#define BPHY_SIFS_TIME 10 ++#define BPHY_DIFS_TIME 50 ++#define BPHY_PLCP_TIME 192 ++#define BPHY_PLCP_SHORT_TIME 96 ++#define BPHY_CWMIN 31 ++ ++/* 802.11 G constants */ ++#define DOT11_OFDM_SIGNAL_EXTENSION 6 ++ ++#define PHY_CWMAX 1023 ++ ++#define DOT11_MAXNUMFRAGS 16 /* max # fragments per MSDU */ ++ ++/* dot11Counters Table - 802.11 spec., Annex D */ ++typedef struct d11cnt { ++ uint32 txfrag; /* dot11TransmittedFragmentCount */ ++ uint32 txmulti; /* dot11MulticastTransmittedFrameCount */ ++ uint32 txfail; /* dot11FailedCount */ ++ uint32 txretry; /* dot11RetryCount */ ++ uint32 txretrie; /* dot11MultipleRetryCount */ ++ uint32 rxdup; /* dot11FrameduplicateCount */ ++ uint32 txrts; /* dot11RTSSuccessCount */ ++ uint32 txnocts; /* dot11RTSFailureCount */ ++ uint32 txnoack; /* dot11ACKFailureCount */ ++ uint32 rxfrag; /* dot11ReceivedFragmentCount */ ++ uint32 rxmulti; /* dot11MulticastReceivedFrameCount */ ++ uint32 rxcrc; /* dot11FCSErrorCount */ ++ uint32 txfrmsnt; /* dot11TransmittedFrameCount */ ++ uint32 rxundec; /* dot11WEPUndecryptableCount */ ++} d11cnt_t; ++ ++/* BRCM OUI */ ++#define BRCM_OUI "\x00\x10\x18" ++ ++/* WPA definitions */ ++#define WPA_VERSION 1 ++#define WPA_OUI "\x00\x50\xF2" ++ ++#define WPA_OUI_LEN 3 ++ ++/* WPA authentication modes */ ++#define WPA_AUTH_NONE 0 /* None */ ++#define WPA_AUTH_UNSPECIFIED 1 /* Unspecified authentication over 802.1X: default for WPA */ ++#define WPA_AUTH_PSK 2 /* Pre-shared Key over 802.1X */ ++#define WPA_AUTH_DISABLED 255 /* Legacy (i.e., non-WPA) */ ++ ++#define IS_WPA_AUTH(auth) ((auth) == WPA_AUTH_NONE || \ ++ (auth) == WPA_AUTH_UNSPECIFIED || \ ++ (auth) == WPA_AUTH_PSK) ++ ++ ++/* Key related defines */ ++#define DOT11_MAX_KEY_SIZE 32 /* max size of any key */ ++#define DOT11_MAX_IV_SIZE 16 /* max size of any IV */ ++#define DOT11_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */ ++ ++#define WEP1_KEY_SIZE 5 /* max size of any WEP key */ ++#define WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */ ++#define WEP128_KEY_SIZE 13 /* max size of any WEP key */ ++#define WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */ ++#define TKIP_MIC_SIZE 8 /* size of TKIP MIC */ ++#define TKIP_EOM_SIZE 7 /* max size of TKIP EOM */ ++#define TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */ ++#define TKIP_KEY_SIZE 32 /* size of any TKIP key */ ++#define TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */ ++#define TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */ ++#define TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */ ++#define TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */ ++#define AES_KEY_SIZE 16 /* size of AES key */ ++ ++#undef PACKED ++#if !defined(__GNUC__) ++#pragma pack() ++#endif ++ ++#endif /* _802_11_H_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/proto/ethernet.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/proto/ethernet.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/proto/ethernet.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/proto/ethernet.h 2005-08-28 11:12:20.450856112 +0200 +@@ -0,0 +1,145 @@ ++/******************************************************************************* ++ * $Id$ ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet. ++ ******************************************************************************/ ++ ++#ifndef _NET_ETHERNET_H_ /* use native BSD ethernet.h when available */ ++#define _NET_ETHERNET_H_ ++ ++#ifndef _TYPEDEFS_H_ ++#include "typedefs.h" ++#endif ++ ++#if defined(__GNUC__) ++#define PACKED __attribute__((packed)) ++#else ++#define PACKED ++#endif ++ ++/* ++ * The number of bytes in an ethernet (MAC) address. ++ */ ++#define ETHER_ADDR_LEN 6 ++ ++/* ++ * The number of bytes in the type field. ++ */ ++#define ETHER_TYPE_LEN 2 ++ ++/* ++ * The number of bytes in the trailing CRC field. ++ */ ++#define ETHER_CRC_LEN 4 ++ ++/* ++ * The length of the combined header. ++ */ ++#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN) ++ ++/* ++ * The minimum packet length. ++ */ ++#define ETHER_MIN_LEN 64 ++ ++/* ++ * The minimum packet user data length. ++ */ ++#define ETHER_MIN_DATA 46 ++ ++/* ++ * The maximum packet length. ++ */ ++#define ETHER_MAX_LEN 1518 ++ ++/* ++ * The maximum packet user data length. ++ */ ++#define ETHER_MAX_DATA 1500 ++ ++/* ++ * Used to uniquely identify a 802.1q VLAN-tagged header. ++ */ ++#define VLAN_TAG 0x8100 ++ ++/* ++ * Located after dest & src address in ether header. ++ */ ++#define VLAN_FIELDS_OFFSET (ETHER_ADDR_LEN * 2) ++ ++/* ++ * 4 bytes of vlan field info. ++ */ ++#define VLAN_FIELDS_SIZE 4 ++ ++/* location of pri bits in 16-bit vlan fields */ ++#define VLAN_PRI_SHIFT 13 ++ ++/* 3 bits of priority */ ++#define VLAN_PRI_MASK 7 ++ ++/* 802.1X ethertype */ ++#define ETHER_TYPE_802_1X 0x888e ++ ++/* ++ * A macro to validate a length with ++ */ ++#define ETHER_IS_VALID_LEN(foo) \ ++ ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN) ++ ++ ++#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */ ++/* ++ * Structure of a 10Mb/s Ethernet header. ++ */ ++struct ether_header { ++ uint8 ether_dhost[ETHER_ADDR_LEN]; ++ uint8 ether_shost[ETHER_ADDR_LEN]; ++ uint16 ether_type; ++} PACKED ; ++ ++/* ++ * Structure of a 48-bit Ethernet address. ++ */ ++struct ether_addr { ++ uint8 octet[ETHER_ADDR_LEN]; ++} PACKED ; ++#endif ++ ++/* ++ * Takes a pointer, returns true if a 48-bit multicast address ++ * (including broadcast, since it is all ones) ++ */ ++#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1) ++ ++/* ++ * Takes a pointer, returns true if a 48-bit broadcast (all ones) ++ */ ++#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \ ++ ((uint8 *)(ea))[1] & \ ++ ((uint8 *)(ea))[2] & \ ++ ((uint8 *)(ea))[3] & \ ++ ((uint8 *)(ea))[4] & \ ++ ((uint8 *)(ea))[5]) == 0xff) ++ ++static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}}; ++ ++/* ++ * Takes a pointer, returns true if a 48-bit null address (all zeros) ++ */ ++#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \ ++ ((uint8 *)(ea))[1] | \ ++ ((uint8 *)(ea))[2] | \ ++ ((uint8 *)(ea))[3] | \ ++ ((uint8 *)(ea))[4] | \ ++ ((uint8 *)(ea))[5]) == 0) ++ ++#undef PACKED ++ ++#endif /* _NET_ETHERNET_H_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/rts/crc.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/rts/crc.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/rts/crc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/rts/crc.h 2005-08-28 11:12:20.451855960 +0200 +@@ -0,0 +1,69 @@ ++/******************************************************************************* ++ * $Id$ ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * crc.h - a function to compute crc for iLine10 headers ++ ******************************************************************************/ ++ ++#ifndef _RTS_CRC_H_ ++#define _RTS_CRC_H_ 1 ++ ++#include "typedefs.h" ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++ ++#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ ++#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ ++#define HCS_GOOD_VALUE 0x39 /* Good final header checksum value */ ++ ++#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ ++#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ ++ ++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ ++#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ ++ ++void hcs(uint8 *, uint); ++uint8 crc8(uint8 *, uint, uint8); ++uint16 crc16(uint8 *, uint, uint16); ++uint32 crc32(uint8 *, uint, uint32); ++ ++/* macros for common usage */ ++ ++#define APPEND_CRC8(pbytes, nbytes) \ ++do { \ ++ uint8 tmp = crc8(pbytes, nbytes, CRC8_INIT_VALUE) ^ 0xff; \ ++ (pbytes)[(nbytes)] = tmp; \ ++ (nbytes) += 1; \ ++} while (0) ++ ++#define APPEND_CRC16(pbytes, nbytes) \ ++do { \ ++ uint16 tmp = crc16(pbytes, nbytes, CRC16_INIT_VALUE) ^ 0xffff; \ ++ (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff; \ ++ (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff; \ ++ (nbytes) += 2; \ ++} while (0) ++ ++#define APPEND_CRC32(pbytes, nbytes) \ ++do { \ ++ uint32 tmp = crc32(pbytes, nbytes, CRC32_INIT_VALUE) ^ 0xffffffff; \ ++ (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff; \ ++ (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff; \ ++ (pbytes)[(nbytes) + 2] = (tmp >> 16) & 0xff; \ ++ (pbytes)[(nbytes) + 3] = (tmp >> 24) & 0xff; \ ++ (nbytes) += 4; \ ++} while (0) ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _RTS_CRC_H_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/s5.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/s5.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/s5.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/s5.h 2005-08-28 11:12:20.451855960 +0200 +@@ -0,0 +1,103 @@ ++#ifndef _S5_H_ ++#define _S5_H_ ++/* ++ * Copyright 2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * Broadcom Sentry5 (S5) BCM5365, 53xx, BCM58xx SOC Internal Core ++ * and MIPS3301 (R4K) System Address Space ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation, located in the file ++ * LICENSE. ++ * ++ * $Id$ ++ * ++ */ ++ ++/* BCM5365 Address map */ ++#define KSEG1ADDR(x) ( (x) | 0xa0000000) ++#define BCM5365_SDRAM 0x00000000 /* 0-128MB Physical SDRAM */ ++#define BCM5365_PCI_MEM 0x08000000 /* Host Mode PCI mem space (64MB) */ ++#define BCM5365_PCI_CFG 0x0c000000 /* Host Mode PCI cfg space (64MB) */ ++#define BCM5365_PCI_DMA 0x40000000 /* Client Mode PCI mem space (1GB)*/ ++#define BCM5365_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ ++#define BCM5365_ENUM 0x18000000 /* Beginning of core enum space */ ++ ++/* BCM5365 Core register space */ ++#define BCM5365_REG_CHIPC 0x18000000 /* Chipcommon registers */ ++#define BCM5365_REG_EMAC0 0x18001000 /* Ethernet MAC0 core registers */ ++#define BCM5365_REG_IPSEC 0x18002000 /* BCM582x CryptoCore registers */ ++#define BCM5365_REG_USB 0x18003000 /* USB core registers */ ++#define BCM5365_REG_PCI 0x18004000 /* PCI core registers */ ++#define BCM5365_REG_MIPS33 0x18005000 /* MIPS core registers */ ++#define BCM5365_REG_MEMC 0x18006000 /* MEMC core registers */ ++#define BCM5365_REG_UARTS (BCM5365_REG_CHIPC + 0x300) /* UART regs */ ++#define BCM5365_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ ++ ++/* COM Ports 1/2 */ ++#define BCM5365_UART (BCM5365_REG_UARTS) ++#define BCM5365_UART_COM2 (BCM5365_REG_UARTS + 0x00000100) ++ ++/* Registers common to MIPS33 Core used in 5365 */ ++#define MIPS33_FLASH_REGION 0x1fc00000 /* Boot FLASH Region */ ++#define MIPS33_EXTIF_REGION 0x1a000000 /* Chipcommon EXTIF region*/ ++#define BCM5365_EXTIF 0x1b000000 /* MISC_CS */ ++#define MIPS33_FLASH_REGION_AUX 0x1c000000 /* FLASH Region 2*/ ++ ++/* Internal Core Sonics Backplane Devices */ ++#define INTERNAL_UART_COM1 BCM5365_UART ++#define INTERNAL_UART_COM2 BCM5365_UART_COM2 ++#define SB_REG_CHIPC BCM5365_REG_CHIPC ++#define SB_REG_ENET0 BCM5365_REG_EMAC0 ++#define SB_REG_IPSEC BCM5365_REG_IPSEC ++#define SB_REG_USB BCM5365_REG_USB ++#define SB_REG_PCI BCM5365_REG_PCI ++#define SB_REG_MIPS BCM5365_REG_MIPS33 ++#define SB_REG_MEMC BCM5365_REG_MEMC ++#define SB_REG_MEMC_OFF 0x6000 ++#define SB_EXTIF_SPACE MIPS33_EXTIF_REGION ++#define SB_FLASH_SPACE MIPS33_FLASH_REGION ++ ++/* ++ * XXX ++ * 5365-specific backplane interrupt flag numbers. This should be done ++ * dynamically instead. ++ */ ++#define SBFLAG_PCI 0 ++#define SBFLAG_ENET0 1 ++#define SBFLAG_ILINE20 2 ++#define SBFLAG_CODEC 3 ++#define SBFLAG_USB 4 ++#define SBFLAG_EXTIF 5 ++#define SBFLAG_ENET1 6 ++ ++/* BCM95365 Local Bus devices */ ++#define BCM95365K_RESET_ADDR BCM5365_EXTIF ++#define BCM95365K_BOARDID_ADDR (BCM5365_EXTIF | 0x4000) ++#define BCM95365K_DOC_ADDR (BCM5365_EXTIF | 0x6000) ++#define BCM95365K_LED_ADDR (BCM5365_EXTIF | 0xc000) ++#define BCM95365K_TOD_REG_BASE (BCM95365K_NVRAM_ADDR | 0x1ff0) ++#define BCM95365K_NVRAM_ADDR (BCM5365_EXTIF | 0xe000) ++#define BCM95365K_NVRAM_SIZE 0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/ ++ ++/* Write to DLR2416 VFD Display character RAM */ ++#define LED_REG(x) \ ++ (*(volatile unsigned char *) (KSEG1ADDR(BCM95365K_LED_ADDR) + (x))) ++ ++#ifdef CONFIG_VSIM ++#define BCM5365_TRACE(trval) do { *((int *)0xa0002ff8) = (trval); \ ++ } while (0) ++#else ++#define BCM5365_TRACE(trval) do { *((unsigned char *)\ ++ KSEG1ADDR(BCM5365K_LED_ADDR)) = (trval); \ ++ *((int *)0xa0002ff8) = (trval); } while (0) ++#endif ++ ++/* BCM9536R Local Bus devices */ ++#define BCM95365R_DOC_ADDR BCM5365_EXTIF ++ ++ ++ ++#endif /*!_S5_H_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbchipc.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbchipc.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbchipc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbchipc.h 2005-08-28 11:12:20.468853376 +0200 +@@ -0,0 +1,281 @@ ++/* ++ * SiliconBackplane Chipcommon core hardware definitions. ++ * ++ * The chipcommon core provides chip identification, SB control, ++ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer, ++ * gpio interface, extbus, and support for serial and parallel flashes. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _SBCHIPC_H ++#define _SBCHIPC_H ++ ++ ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif /* PAD */ ++ ++typedef volatile struct { ++ uint32 chipid; /* 0x0 */ ++ uint32 capabilities; ++ uint32 corecontrol; /* corerev >= 1 */ ++ uint32 PAD[5]; ++ ++ /* Interrupt control */ ++ uint32 intstatus; /* 0x20 */ ++ uint32 intmask; ++ uint32 PAD[6]; ++ ++ /* serial flash interface registers */ ++ uint32 flashcontrol; /* 0x40 */ ++ uint32 flashaddress; ++ uint32 flashdata; ++ uint32 PAD[1]; ++ ++ /* Silicon backplane configuration broadcast control */ ++ uint32 broadcastaddress; ++ uint32 broadcastdata; ++ uint32 PAD[2]; ++ ++ /* gpio - cleared only by power-on-reset */ ++ uint32 gpioin; /* 0x60 */ ++ uint32 gpioout; ++ uint32 gpioouten; ++ uint32 gpiocontrol; ++ uint32 gpiointpolarity; ++ uint32 gpiointmask; ++ uint32 PAD[2]; ++ ++ /* Watchdog timer */ ++ uint32 watchdog; /* 0x80 */ ++ uint32 PAD[3]; ++ ++ /* clock control */ ++ uint32 clockcontrol_n; /* 0x90 */ ++ uint32 clockcontrol_sb; /* aka m0 */ ++ uint32 clockcontrol_pci; /* aka m1 */ ++ uint32 clockcontrol_m2; /* mii/uart/mipsref */ ++ uint32 clockcontrol_mips; /* aka m3 */ ++ uint32 uart_clkdiv; /* corerev >= 3 */ ++ uint32 PAD[2]; ++ ++ /* pll delay registers (corerev >= 4) */ ++ uint32 pll_on_delay; /* 0xb0 */ ++ uint32 fref_sel_delay; ++ uint32 slow_clk_ctl; ++ uint32 PAD[17]; ++ ++ /* ExtBus control registers (corerev >= 3) */ ++ uint32 cs01config; /* 0x100 */ ++ uint32 cs01memwaitcnt; ++ uint32 cs01attrwaitcnt; ++ uint32 cs01iowaitcnt; ++ uint32 cs23config; ++ uint32 cs23memwaitcnt; ++ uint32 cs23attrwaitcnt; ++ uint32 cs23iowaitcnt; ++ uint32 cs4config; ++ uint32 cs4waitcnt; ++ uint32 parallelflashconfig; ++ uint32 parallelflashwaitcnt; ++ uint32 PAD[116]; ++ ++ /* uarts */ ++ uint8 uart0data; /* 0x300 */ ++ uint8 uart0imr; ++ uint8 uart0fcr; ++ uint8 uart0lcr; ++ uint8 uart0mcr; ++ uint8 uart0lsr; ++ uint8 uart0msr; ++ uint8 uart0scratch; ++ uint8 PAD[248]; /* corerev >= 1 */ ++ ++ uint8 uart1data; /* 0x400 */ ++ uint8 uart1imr; ++ uint8 uart1fcr; ++ uint8 uart1lcr; ++ uint8 uart1mcr; ++ uint8 uart1lsr; ++ uint8 uart1msr; ++ uint8 uart1scratch; ++} chipcregs_t; ++ ++/* chipid */ ++#define CID_ID_MASK 0x0000ffff /* Chip Id mask */ ++#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */ ++#define CID_REV_SHIFT 16 /* Chip Revision shift */ ++#define CID_PKG_MASK 0x00f00000 /* Package Option mask */ ++#define CID_PKG_SHIFT 20 /* Package Option shift */ ++#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */ ++#define CID_CC_SHIFT 24 ++ ++/* capabilities */ ++#define CAP_UARTS_MASK 0x00000003 /* Number of uarts */ ++#define CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */ ++#define CAP_UCLKSEL 0x00000018 /* UARTs clock select */ ++#define CAP_UINTCLK 0x00000008 /* UARTs are driven by internal divided clock */ ++#define CAP_UARTGPIO 0x00000020 /* UARTs own Gpio's 15:12 */ ++#define CAP_EXTBUS 0x00000040 /* External bus present */ ++#define CAP_FLASH_MASK 0x00000700 /* Type of flash */ ++#define CAP_PLL_MASK 0x00038000 /* Type of PLL */ ++#define CAP_PWR_CTL 0x00040000 /* Power control */ ++ ++/* PLL type */ ++#define PLL_NONE 0x00000000 ++#define PLL_TYPE1 0x00010000 /* 48Mhz base, 3 dividers */ ++#define PLL_TYPE2 0x00020000 /* 48Mhz, 4 dividers */ ++#define PLL_TYPE3 0x00030000 /* 25Mhz, 2 dividers */ ++#define PLL_TYPE4 0x00008000 /* 48Mhz, 4 dividers */ ++ ++/* corecontrol */ ++#define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */ ++#define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ ++ ++/* intstatus/intmask */ ++#define CI_EI 0x00000002 /* ro: ext intr pin (corerev >= 3) */ ++ ++/* slow_clk_ctl */ ++#define SCC_SS_MASK 0x00000007 /* slow clock source mask */ ++#define SCC_SS_LPO 0x00000000 /* source of slow clock is LPO */ ++#define SCC_SS_XTAL 0x00000001 /* source of slow clock is crystal */ ++#define SCC_SS_PCI 0x00000002 /* source of slow clock is PCI */ ++#define SCC_LF 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ ++#define SCC_LP 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ ++#define SCC_FS 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ ++#define SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ ++#define SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ ++#define SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ ++#define SCC_CD_MASK 0xffff0000 /* ClockDivider mask, SlowClk = 1/(4+divisor) * crystal/PCI clock */ ++#define SCC_CD_SHF 16 /* CLockDivider shift */ ++ ++/* clockcontrol_n */ ++#define CN_N1_MASK 0x3f /* n1 control */ ++#define CN_N2_MASK 0x3f00 /* n2 control */ ++#define CN_N2_SHIFT 8 ++ ++/* clockcontrol_sb/pci/uart */ ++#define CC_M1_MASK 0x3f /* m1 control */ ++#define CC_M2_MASK 0x3f00 /* m2 control */ ++#define CC_M2_SHIFT 8 ++#define CC_M3_MASK 0x3f0000 /* m3 control */ ++#define CC_M3_SHIFT 16 ++#define CC_MC_MASK 0x1f000000 /* mux control */ ++#define CC_MC_SHIFT 24 ++ ++/* N3M Clock control values for 125Mhz */ ++#define CC_125_N 0x0802 /* Default values for bcm4310 */ ++#define CC_125_M 0x04020009 ++#define CC_125_M25 0x11090009 ++#define CC_125_M33 0x11090005 ++ ++/* N3M Clock control magic field values */ ++#define CC_F6_2 0x02 /* A factor of 2 in */ ++#define CC_F6_3 0x03 /* 6-bit fields like */ ++#define CC_F6_4 0x05 /* N1, M1 or M3 */ ++#define CC_F6_5 0x09 ++#define CC_F6_6 0x11 ++#define CC_F6_7 0x21 ++ ++#define CC_F5_BIAS 5 /* 5-bit fields get this added */ ++ ++#define CC_MC_BYPASS 0x08 ++#define CC_MC_M1 0x04 ++#define CC_MC_M1M2 0x02 ++#define CC_MC_M1M2M3 0x01 ++#define CC_MC_M1M3 0x11 ++ ++/* Type 2 Clock control magic field values */ ++#define CC_T2_BIAS 2 /* n1, n2, m1 & m3 bias */ ++#define CC_T2M2_BIAS 3 /* m2 bias */ ++ ++#define CC_T2MC_M1BYP 1 ++#define CC_T2MC_M2BYP 2 ++#define CC_T2MC_M3BYP 4 ++ ++/* Common clock base */ ++#define CC_CLOCK_BASE 24000000 /* Half the clock freq */ ++ ++/* Flash types in the chipcommon capabilities register */ ++#define FLASH_NONE 0x000 /* No flash */ ++#define SFLASH_ST 0x100 /* ST serial flash */ ++#define SFLASH_AT 0x200 /* Atmel serial flash */ ++#define PFLASH 0x700 /* Parallel flash */ ++ ++/* Bits in the config registers */ ++#define CC_CFG_EN 0x0001 /* Enable */ ++#define CC_CFG_EM_MASK 0x000e /* Extif Mode */ ++#define CC_CFG_EM_ASYNC 0x0002 /* Async/Parallel flash */ ++#define CC_CFG_EM_SYNC 0x0004 /* Synchronous */ ++#define CC_CFG_EM_PCMCIA 0x0008 /* PCMCIA */ ++#define CC_CFG_EM_IDE 0x000a /* IDE */ ++#define CC_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ ++#define CC_CFG_CD_MASK 0x0060 /* Sync: Clock divisor */ ++#define CC_CFG_CE 0x0080 /* Sync: Clock enable */ ++#define CC_CFG_SB 0x0100 /* Sync: Size/Bytestrobe */ ++ ++/* Start/busy bit in flashcontrol */ ++#define SFLASH_START 0x80000000 ++#define SFLASH_BUSY SFLASH_START ++ ++/* flashcontrol opcodes for ST flashes */ ++#define SFLASH_ST_WREN 0x0006 /* Write Enable */ ++#define SFLASH_ST_WRDIS 0x0004 /* Write Disable */ ++#define SFLASH_ST_RDSR 0x0105 /* Read Status Register */ ++#define SFLASH_ST_WRSR 0x0101 /* Write Status Register */ ++#define SFLASH_ST_READ 0x0303 /* Read Data Bytes */ ++#define SFLASH_ST_PP 0x0302 /* Page Program */ ++#define SFLASH_ST_SE 0x02d8 /* Sector Erase */ ++#define SFLASH_ST_BE 0x00c7 /* Bulk Erase */ ++#define SFLASH_ST_DP 0x00b9 /* Deep Power-down */ ++#define SFLASH_ST_RES 0x03ab /* Read Electronic Signature */ ++ ++/* Status register bits for ST flashes */ ++#define SFLASH_ST_WIP 0x01 /* Write In Progress */ ++#define SFLASH_ST_WEL 0x02 /* Write Enable Latch */ ++#define SFLASH_ST_BP_MASK 0x1c /* Block Protect */ ++#define SFLASH_ST_BP_SHIFT 2 ++#define SFLASH_ST_SRWD 0x80 /* Status Register Write Disable */ ++ ++/* flashcontrol opcodes for Atmel flashes */ ++#define SFLASH_AT_READ 0x07e8 ++#define SFLASH_AT_PAGE_READ 0x07d2 ++#define SFLASH_AT_BUF1_READ ++#define SFLASH_AT_BUF2_READ ++#define SFLASH_AT_STATUS 0x01d7 ++#define SFLASH_AT_BUF1_WRITE 0x0384 ++#define SFLASH_AT_BUF2_WRITE 0x0387 ++#define SFLASH_AT_BUF1_ERASE_PROGRAM 0x0283 ++#define SFLASH_AT_BUF2_ERASE_PROGRAM 0x0286 ++#define SFLASH_AT_BUF1_PROGRAM 0x0288 ++#define SFLASH_AT_BUF2_PROGRAM 0x0289 ++#define SFLASH_AT_PAGE_ERASE 0x0281 ++#define SFLASH_AT_BLOCK_ERASE 0x0250 ++#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 ++#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 ++#define SFLASH_AT_BUF1_LOAD 0x0253 ++#define SFLASH_AT_BUF2_LOAD 0x0255 ++#define SFLASH_AT_BUF1_COMPARE 0x0260 ++#define SFLASH_AT_BUF2_COMPARE 0x0261 ++#define SFLASH_AT_BUF1_REPROGRAM 0x0258 ++#define SFLASH_AT_BUF2_REPROGRAM 0x0259 ++ ++/* Status register bits for Atmel flashes */ ++#define SFLASH_AT_READY 0x80 ++#define SFLASH_AT_MISMATCH 0x40 ++#define SFLASH_AT_ID_MASK 0x38 ++#define SFLASH_AT_ID_SHIFT 3 ++ ++#endif /* _SBCHIPC_H */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbconfig.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbconfig.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbconfig.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbconfig.h 2005-08-28 11:12:20.469853224 +0200 +@@ -0,0 +1,296 @@ ++/* ++ * Broadcom SiliconBackplane hardware register definitions. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _SBCONFIG_H ++#define _SBCONFIG_H ++ ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif ++ ++/* ++ * SiliconBackplane Address Map. ++ * All regions may not exist on all chips. ++ */ ++#define SB_SDRAM_BASE 0x00000000 /* Physical SDRAM */ ++#define SB_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ ++#define SB_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ ++#define SB_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ ++#define SB_ENUM_BASE 0x18000000 /* Enumeration space base */ ++#define SB_ENUM_LIM 0x18010000 /* Enumeration space limit */ ++#define SB_EXTIF_BASE 0x1f000000 /* External Interface region base address */ ++#define SB_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ ++#define SB_EUART (SB_EXTIF_BASE + 0x00800000) ++#define SB_LED (SB_EXTIF_BASE + 0x00900000) ++ ++/* enumeration space related defs */ ++#define SB_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */ ++#define SB_MAXCORES ((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE) ++#define SBCONFIGOFF 0xf00 /* core sbconfig regs are top 256bytes of regs */ ++#define SBCONFIGSIZE 256 /* sizeof (sbconfig_t) */ ++ ++/* mips address */ ++#define SB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ ++ ++/* ++ * Sonics Configuration Space Registers. ++ */ ++#ifdef _LANGUAGE_ASSEMBLY ++ ++#define SBIPSFLAG 0x08 ++#define SBTPSFLAG 0x18 ++#define SBTMERRLOGA 0x48 /* sonics >= 2.3 */ ++#define SBTMERRLOG 0x50 /* sonics >= 2.3 */ ++#define SBADMATCH3 0x60 ++#define SBADMATCH2 0x68 ++#define SBADMATCH1 0x70 ++#define SBIMSTATE 0x90 ++#define SBINTVEC 0x94 ++#define SBTMSTATELOW 0x98 ++#define SBTMSTATEHIGH 0x9c ++#define SBBWA0 0xa0 ++#define SBIMCONFIGLOW 0xa8 ++#define SBIMCONFIGHIGH 0xac ++#define SBADMATCH0 0xb0 ++#define SBTMCONFIGLOW 0xb8 ++#define SBTMCONFIGHIGH 0xbc ++#define SBBCONFIG 0xc0 ++#define SBBSTATE 0xc8 ++#define SBACTCNFG 0xd8 ++#define SBFLAGST 0xe8 ++#define SBIDLOW 0xf8 ++#define SBIDHIGH 0xfc ++ ++ ++#else ++ ++typedef volatile struct _sbconfig { ++ uint32 PAD[2]; ++ uint32 sbipsflag; /* initiator port ocp slave flag */ ++ uint32 PAD[3]; ++ uint32 sbtpsflag; /* target port ocp slave flag */ ++ uint32 PAD[11]; ++ uint32 sbtmerrloga; /* (sonics >= 2.3) */ ++ uint32 PAD; ++ uint32 sbtmerrlog; /* (sonics >= 2.3) */ ++ uint32 PAD[3]; ++ uint32 sbadmatch3; /* address match3 */ ++ uint32 PAD; ++ uint32 sbadmatch2; /* address match2 */ ++ uint32 PAD; ++ uint32 sbadmatch1; /* address match1 */ ++ uint32 PAD[7]; ++ uint32 sbimstate; /* initiator agent state */ ++ uint32 sbintvec; /* interrupt mask */ ++ uint32 sbtmstatelow; /* target state */ ++ uint32 sbtmstatehigh; /* target state */ ++ uint32 sbbwa0; /* bandwidth allocation table0 */ ++ uint32 PAD; ++ uint32 sbimconfiglow; /* initiator configuration */ ++ uint32 sbimconfighigh; /* initiator configuration */ ++ uint32 sbadmatch0; /* address match0 */ ++ uint32 PAD; ++ uint32 sbtmconfiglow; /* target configuration */ ++ uint32 sbtmconfighigh; /* target configuration */ ++ uint32 sbbconfig; /* broadcast configuration */ ++ uint32 PAD; ++ uint32 sbbstate; /* broadcast state */ ++ uint32 PAD[3]; ++ uint32 sbactcnfg; /* activate configuration */ ++ uint32 PAD[3]; ++ uint32 sbflagst; /* current sbflags */ ++ uint32 PAD[3]; ++ uint32 sbidlow; /* identification */ ++ uint32 sbidhigh; /* identification */ ++} sbconfig_t; ++ ++#endif /* _LANGUAGE_ASSEMBLY */ ++ ++/* sbipsflag */ ++#define SBIPS_INT1_MASK 0x3f /* which sbflags get routed to mips interrupt 1 */ ++#define SBIPS_INT1_SHIFT 0 ++#define SBIPS_INT2_MASK 0x3f00 /* which sbflags get routed to mips interrupt 2 */ ++#define SBIPS_INT2_SHIFT 8 ++#define SBIPS_INT3_MASK 0x3f0000 /* which sbflags get routed to mips interrupt 3 */ ++#define SBIPS_INT3_SHIFT 16 ++#define SBIPS_INT4_MASK 0x3f000000 /* which sbflags get routed to mips interrupt 4 */ ++#define SBIPS_INT4_SHIFT 24 ++ ++/* sbtpsflag */ ++#define SBTPS_NUM0_MASK 0x3f /* interrupt sbFlag # generated by this core */ ++#define SBTPS_F0EN0 0x40 /* interrupt is always sent on the backplane */ ++ ++/* sbtmerrlog */ ++#define SBTMEL_CM 0x00000007 /* command */ ++#define SBTMEL_CI 0x0000ff00 /* connection id */ ++#define SBTMEL_EC 0x0f000000 /* error code */ ++#define SBTMEL_ME 0x80000000 /* multiple error */ ++ ++/* sbimstate */ ++#define SBIM_PC 0xf /* pipecount */ ++#define SBIM_AP_MASK 0x30 /* arbitration policy */ ++#define SBIM_AP_BOTH 0x00 /* use both timeslaces and token */ ++#define SBIM_AP_TS 0x10 /* use timesliaces only */ ++#define SBIM_AP_TK 0x20 /* use token only */ ++#define SBIM_AP_RSV 0x30 /* reserved */ ++#define SBIM_IBE 0x20000 /* inbanderror */ ++#define SBIM_TO 0x40000 /* timeout */ ++#define SBIM_BY 0x01800000 /* busy (sonics >= 2.3) */ ++#define SBIM_RJ 0x02000000 /* reject (sonics >= 2.3) */ ++ ++/* sbtmstatelow */ ++#define SBTML_RESET 0x1 /* reset */ ++#define SBTML_REJ 0x2 /* reject */ ++#define SBTML_CLK 0x10000 /* clock enable */ ++#define SBTML_FGC 0x20000 /* force gated clocks on */ ++#define SBTML_FL_MASK 0x3ffc0000 /* core-specific flags */ ++#define SBTML_PE 0x40000000 /* pme enable */ ++#define SBTML_BE 0x80000000 /* bist enable */ ++ ++/* sbtmstatehigh */ ++#define SBTMH_SERR 0x1 /* serror */ ++#define SBTMH_INT 0x2 /* interrupt */ ++#define SBTMH_BUSY 0x4 /* busy */ ++#define SBTMH_TO 0x00000020 /* timeout (sonics >= 2.3) */ ++#define SBTMH_FL_MASK 0x1fff0000 /* core-specific flags */ ++#define SBTMH_GCR 0x20000000 /* gated clock request */ ++#define SBTMH_BISTF 0x40000000 /* bist failed */ ++#define SBTMH_BISTD 0x80000000 /* bist done */ ++ ++/* sbbwa0 */ ++#define SBBWA_TAB0_MASK 0xffff /* lookup table 0 */ ++#define SBBWA_TAB1_MASK 0xffff /* lookup table 1 */ ++#define SBBWA_TAB1_SHIFT 16 ++ ++/* sbimconfiglow */ ++#define SBIMCL_STO_MASK 0x7 /* service timeout */ ++#define SBIMCL_RTO_MASK 0x70 /* request timeout */ ++#define SBIMCL_RTO_SHIFT 4 ++#define SBIMCL_CID_MASK 0xff0000 /* connection id */ ++#define SBIMCL_CID_SHIFT 16 ++ ++/* sbimconfighigh */ ++#define SBIMCH_IEM_MASK 0xc /* inband error mode */ ++#define SBIMCH_TEM_MASK 0x30 /* timeout error mode */ ++#define SBIMCH_TEM_SHIFT 4 ++#define SBIMCH_BEM_MASK 0xc0 /* bus error mode */ ++#define SBIMCH_BEM_SHIFT 6 ++ ++/* sbadmatch0 */ ++#define SBAM_TYPE_MASK 0x3 /* address type */ ++#define SBAM_AD64 0x4 /* reserved */ ++#define SBAM_ADINT0_MASK 0xf8 /* type0 size */ ++#define SBAM_ADINT0_SHIFT 3 ++#define SBAM_ADINT1_MASK 0x1f8 /* type1 size */ ++#define SBAM_ADINT1_SHIFT 3 ++#define SBAM_ADINT2_MASK 0x1f8 /* type2 size */ ++#define SBAM_ADINT2_SHIFT 3 ++#define SBAM_ADEN 0x400 /* enable */ ++#define SBAM_ADNEG 0x800 /* negative decode */ ++#define SBAM_BASE0_MASK 0xffffff00 /* type0 base address */ ++#define SBAM_BASE0_SHIFT 8 ++#define SBAM_BASE1_MASK 0xfffff000 /* type1 base address for the core */ ++#define SBAM_BASE1_SHIFT 12 ++#define SBAM_BASE2_MASK 0xffff0000 /* type2 base address for the core */ ++#define SBAM_BASE2_SHIFT 16 ++ ++/* sbtmconfiglow */ ++#define SBTMCL_CD_MASK 0xff /* clock divide */ ++#define SBTMCL_CO_MASK 0xf800 /* clock offset */ ++#define SBTMCL_CO_SHIFT 11 ++#define SBTMCL_IF_MASK 0xfc0000 /* interrupt flags */ ++#define SBTMCL_IF_SHIFT 18 ++#define SBTMCL_IM_MASK 0x3000000 /* interrupt mode */ ++#define SBTMCL_IM_SHIFT 24 ++ ++/* sbtmconfighigh */ ++#define SBTMCH_BM_MASK 0x3 /* busy mode */ ++#define SBTMCH_RM_MASK 0x3 /* retry mode */ ++#define SBTMCH_RM_SHIFT 2 ++#define SBTMCH_SM_MASK 0x30 /* stop mode */ ++#define SBTMCH_SM_SHIFT 4 ++#define SBTMCH_EM_MASK 0x300 /* sb error mode */ ++#define SBTMCH_EM_SHIFT 8 ++#define SBTMCH_IM_MASK 0xc00 /* int mode */ ++#define SBTMCH_IM_SHIFT 10 ++ ++/* sbbconfig */ ++#define SBBC_LAT_MASK 0x3 /* sb latency */ ++#define SBBC_MAX0_MASK 0xf0000 /* maxccntr0 */ ++#define SBBC_MAX0_SHIFT 16 ++#define SBBC_MAX1_MASK 0xf00000 /* maxccntr1 */ ++#define SBBC_MAX1_SHIFT 20 ++ ++/* sbbstate */ ++#define SBBS_SRD 0x1 /* st reg disable */ ++#define SBBS_HRD 0x2 /* hold reg disable */ ++ ++/* sbidlow */ ++#define SBIDL_CS_MASK 0x3 /* config space */ ++#define SBIDL_AR_MASK 0x38 /* # address ranges supported */ ++#define SBIDL_AR_SHIFT 3 ++#define SBIDL_SYNCH 0x40 /* sync */ ++#define SBIDL_INIT 0x80 /* initiator */ ++#define SBIDL_MINLAT_MASK 0xf00 /* minimum backplane latency */ ++#define SBIDL_MINLAT_SHIFT 8 ++#define SBIDL_MAXLAT 0xf000 /* maximum backplane latency */ ++#define SBIDL_MAXLAT_SHIFT 12 ++#define SBIDL_FIRST 0x10000 /* this initiator is first */ ++#define SBIDL_CW_MASK 0xc0000 /* cycle counter width */ ++#define SBIDL_CW_SHIFT 18 ++#define SBIDL_TP_MASK 0xf00000 /* target ports */ ++#define SBIDL_TP_SHIFT 20 ++#define SBIDL_IP_MASK 0xf000000 /* initiator ports */ ++#define SBIDL_IP_SHIFT 24 ++#define SBIDL_RV_MASK 0xf0000000 /* sonics backplane revision code */ ++#define SBIDL_RV_SHIFT 28 ++ ++/* sbidhigh */ ++#define SBIDH_RC_MASK 0xf /* revision code*/ ++#define SBIDH_CC_MASK 0xfff0 /* core code */ ++#define SBIDH_CC_SHIFT 4 ++#define SBIDH_VC_MASK 0xffff0000 /* vendor code */ ++#define SBIDH_VC_SHIFT 16 ++ ++#define SB_COMMIT 0xfd8 /* update buffered registers value */ ++ ++/* vendor codes */ ++#define SB_VEND_BCM 0x4243 /* Broadcom's SB vendor code */ ++ ++/* core codes */ ++#define SB_CC 0x800 /* chipcommon core */ ++#define SB_ILINE20 0x801 /* iline20 core */ ++#define SB_SDRAM 0x803 /* sdram core */ ++#define SB_PCI 0x804 /* pci core */ ++#define SB_MIPS 0x805 /* mips core */ ++#define SB_ENET 0x806 /* enet mac core */ ++#define SB_CODEC 0x807 /* v90 codec core */ ++#define SB_USB 0x808 /* usb 1.1 host/device core */ ++#define SB_ILINE100 0x80a /* iline100 core */ ++#define SB_IPSEC 0x80b /* ipsec core */ ++#define SB_PCMCIA 0x80d /* pcmcia core */ ++#define SB_MEMC 0x80f /* memc sdram core */ ++#define SB_EXTIF 0x811 /* external interface core */ ++#define SB_D11 0x812 /* 802.11 MAC core */ ++#define SB_MIPS33 0x816 /* mips3302 core */ ++#define SB_USB11H 0x817 /* usb 1.1 host core */ ++#define SB_USB11D 0x818 /* usb 1.1 device core */ ++#define SB_USB20H 0x819 /* usb 2.0 host core */ ++#define SB_USB20D 0x81A /* usb 2.0 device core */ ++#define SB_SDIOH 0x81B /* sdio host core */ ++#define SB_ROBO 0x81C /* robo switch core */ ++ ++#endif /* _SBCONFIG_H */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbextif.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbextif.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbextif.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbextif.h 2005-08-28 11:12:20.470853072 +0200 +@@ -0,0 +1,242 @@ ++/* ++ * Hardware-specific External Interface I/O core definitions ++ * for the BCM47xx family of SiliconBackplane-based chips. ++ * ++ * The External Interface core supports a total of three external chip selects ++ * supporting external interfaces. One of the external chip selects is ++ * used for Flash, one is used for PCMCIA, and the other may be ++ * programmed to support either a synchronous interface or an ++ * asynchronous interface. The asynchronous interface can be used to ++ * support external devices such as UARTs and the BCM2019 Bluetooth ++ * baseband processor. ++ * The external interface core also contains 2 on-chip 16550 UARTs, clock ++ * frequency control, a watchdog interrupt timer, and a GPIO interface. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _SBEXTIF_H ++#define _SBEXTIF_H ++ ++/* external interface address space */ ++#define EXTIF_PCMCIA_MEMBASE(x) (x) ++#define EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000) ++#define EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000) ++#define EXTIF_CFGIF_BASE(x) ((x) + 0x800000) ++#define EXTIF_FLASH_BASE(x) ((x) + 0xc00000) ++ ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif /* PAD */ ++ ++/* ++ * The multiple instances of output and output enable registers ++ * are present to allow driver software for multiple cores to control ++ * gpio outputs without needing to share a single register pair. ++ */ ++struct gpiouser { ++ uint32 out; ++ uint32 outen; ++}; ++#define NGPIOUSER 5 ++ ++typedef volatile struct { ++ uint32 corecontrol; ++ uint32 extstatus; ++ uint32 PAD[2]; ++ ++ /* pcmcia control registers */ ++ uint32 pcmcia_config; ++ uint32 pcmcia_memwait; ++ uint32 pcmcia_attrwait; ++ uint32 pcmcia_iowait; ++ ++ /* programmable interface control registers */ ++ uint32 prog_config; ++ uint32 prog_waitcount; ++ ++ /* flash control registers */ ++ uint32 flash_config; ++ uint32 flash_waitcount; ++ uint32 PAD[4]; ++ ++ uint32 watchdog; ++ ++ /* clock control */ ++ uint32 clockcontrol_n; ++ uint32 clockcontrol_sb; ++ uint32 clockcontrol_pci; ++ uint32 clockcontrol_mii; ++ uint32 PAD[3]; ++ ++ /* gpio */ ++ uint32 gpioin; ++ struct gpiouser gpio[NGPIOUSER]; ++ uint32 PAD; ++ uint32 ejtagouten; ++ uint32 gpiointpolarity; ++ uint32 gpiointmask; ++ uint32 PAD[153]; ++ ++ uint8 uartdata; ++ uint8 PAD[3]; ++ uint8 uartimer; ++ uint8 PAD[3]; ++ uint8 uartfcr; ++ uint8 PAD[3]; ++ uint8 uartlcr; ++ uint8 PAD[3]; ++ uint8 uartmcr; ++ uint8 PAD[3]; ++ uint8 uartlsr; ++ uint8 PAD[3]; ++ uint8 uartmsr; ++ uint8 PAD[3]; ++ uint8 uartscratch; ++ uint8 PAD[3]; ++} extifregs_t; ++ ++/* corecontrol */ ++#define CC_UE (1 << 0) /* uart enable */ ++ ++/* extstatus */ ++#define ES_EM (1 << 0) /* endian mode (ro) */ ++#define ES_EI (1 << 1) /* external interrupt pin (ro) */ ++#define ES_GI (1 << 2) /* gpio interrupt pin (ro) */ ++ ++/* gpio bit mask */ ++#define GPIO_BIT0 (1 << 0) ++#define GPIO_BIT1 (1 << 1) ++#define GPIO_BIT2 (1 << 2) ++#define GPIO_BIT3 (1 << 3) ++#define GPIO_BIT4 (1 << 4) ++#define GPIO_BIT5 (1 << 5) ++#define GPIO_BIT6 (1 << 6) ++#define GPIO_BIT7 (1 << 7) ++ ++ ++/* pcmcia/prog/flash_config */ ++#define CF_EN (1 << 0) /* enable */ ++#define CF_EM_MASK 0xe /* mode */ ++#define CF_EM_SHIFT 1 ++#define CF_EM_FLASH 0x0 /* flash/asynchronous mode */ ++#define CF_EM_SYNC 0x2 /* synchronous mode */ ++#define CF_EM_PCMCIA 0x4 /* pcmcia mode */ ++#define CF_DS (1 << 4) /* destsize: 0=8bit, 1=16bit */ ++#define CF_BS (1 << 5) /* byteswap */ ++#define CF_CD_MASK 0xc0 /* clock divider */ ++#define CF_CD_SHIFT 6 ++#define CF_CD_DIV2 0x0 /* backplane/2 */ ++#define CF_CD_DIV3 0x40 /* backplane/3 */ ++#define CF_CD_DIV4 0x80 /* backplane/4 */ ++#define CF_CE (1 << 8) /* clock enable */ ++#define CF_SB (1 << 9) /* size/bytestrobe (synch only) */ ++ ++/* pcmcia_memwait */ ++#define PM_W0_MASK 0x3f /* waitcount0 */ ++#define PM_W1_MASK 0x1f00 /* waitcount1 */ ++#define PM_W1_SHIFT 8 ++#define PM_W2_MASK 0x1f0000 /* waitcount2 */ ++#define PM_W2_SHIFT 16 ++#define PM_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PM_W3_SHIFT 24 ++ ++/* pcmcia_attrwait */ ++#define PA_W0_MASK 0x3f /* waitcount0 */ ++#define PA_W1_MASK 0x1f00 /* waitcount1 */ ++#define PA_W1_SHIFT 8 ++#define PA_W2_MASK 0x1f0000 /* waitcount2 */ ++#define PA_W2_SHIFT 16 ++#define PA_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PA_W3_SHIFT 24 ++ ++/* pcmcia_iowait */ ++#define PI_W0_MASK 0x3f /* waitcount0 */ ++#define PI_W1_MASK 0x1f00 /* waitcount1 */ ++#define PI_W1_SHIFT 8 ++#define PI_W2_MASK 0x1f0000 /* waitcount2 */ ++#define PI_W2_SHIFT 16 ++#define PI_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PI_W3_SHIFT 24 ++ ++/* prog_waitcount */ ++#define PW_W0_MASK 0x0000001f /* waitcount0 */ ++#define PW_W1_MASK 0x00001f00 /* waitcount1 */ ++#define PW_W1_SHIFT 8 ++#define PW_W2_MASK 0x001f0000 /* waitcount2 */ ++#define PW_W2_SHIFT 16 ++#define PW_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PW_W3_SHIFT 24 ++ ++#define PW_W0 0x0000000c ++#define PW_W1 0x00000a00 ++#define PW_W2 0x00020000 ++#define PW_W3 0x01000000 ++ ++/* flash_waitcount */ ++#define FW_W0_MASK 0x1f /* waitcount0 */ ++#define FW_W1_MASK 0x1f00 /* waitcount1 */ ++#define FW_W1_SHIFT 8 ++#define FW_W2_MASK 0x1f0000 /* waitcount2 */ ++#define FW_W2_SHIFT 16 ++#define FW_W3_MASK 0x1f000000 /* waitcount3 */ ++#define FW_W3_SHIFT 24 ++ ++/* watchdog */ ++#define WATCHDOG_CLOCK 48000000 /* Hz */ ++ ++/* clockcontrol_n */ ++#define CN_N1_MASK 0x3f /* n1 control */ ++#define CN_N2_MASK 0x3f00 /* n2 control */ ++#define CN_N2_SHIFT 8 ++ ++/* clockcontrol_sb/pci/mii */ ++#define CC_M1_MASK 0x3f /* m1 control */ ++#define CC_M2_MASK 0x3f00 /* m2 control */ ++#define CC_M2_SHIFT 8 ++#define CC_M3_MASK 0x3f0000 /* m3 control */ ++#define CC_M3_SHIFT 16 ++#define CC_MC_MASK 0x1f000000 /* mux control */ ++#define CC_MC_SHIFT 24 ++ ++/* Clock control default values */ ++#define CC_DEF_N 0x0009 /* Default values for bcm4710 */ ++#define CC_DEF_100 0x04020011 ++#define CC_DEF_33 0x11030011 ++#define CC_DEF_25 0x11050011 ++ ++/* Clock control values for 125Mhz */ ++#define CC_125_N 0x0802 ++#define CC_125_M 0x04020009 ++#define CC_125_M25 0x11090009 ++#define CC_125_M33 0x11090005 ++ ++/* Clock control magic field values */ ++#define CC_F6_2 0x02 /* A factor of 2 in */ ++#define CC_F6_3 0x03 /* 6-bit fields like */ ++#define CC_F6_4 0x05 /* N1, M1 or M3 */ ++#define CC_F6_5 0x09 ++#define CC_F6_6 0x11 ++#define CC_F6_7 0x21 ++ ++#define CC_F5_BIAS 5 /* 5-bit fields get this added */ ++ ++#define CC_MC_BYPASS 0x08 ++#define CC_MC_M1 0x04 ++#define CC_MC_M1M2 0x02 ++#define CC_MC_M1M2M3 0x01 ++#define CC_MC_M1M3 0x11 ++ ++#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */ ++ ++#endif /* _SBEXTIF_H */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbmemc.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbmemc.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbmemc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbmemc.h 2005-08-28 11:12:20.471852920 +0200 +@@ -0,0 +1,144 @@ ++/* ++ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _SBMEMC_H ++#define _SBMEMC_H ++ ++#ifdef _LANGUAGE_ASSEMBLY ++ ++#define MEMC_CONTROL 0x00 ++#define MEMC_CONFIG 0x04 ++#define MEMC_REFRESH 0x08 ++#define MEMC_BISTSTAT 0x0c ++#define MEMC_MODEBUF 0x10 ++#define MEMC_BKCLS 0x14 ++#define MEMC_PRIORINV 0x18 ++#define MEMC_DRAMTIM 0x1c ++#define MEMC_INTSTAT 0x20 ++#define MEMC_INTMASK 0x24 ++#define MEMC_INTINFO 0x28 ++#define MEMC_NCDLCTL 0x30 ++#define MEMC_RDNCDLCOR 0x34 ++#define MEMC_WRNCDLCOR 0x38 ++#define MEMC_MISCDLYCTL 0x3c ++#define MEMC_DQSGATENCDL 0x40 ++#define MEMC_SPARE 0x44 ++#define MEMC_TPADDR 0x48 ++#define MEMC_TPDATA 0x4c ++#define MEMC_BARRIER 0x50 ++#define MEMC_CORE 0x54 ++ ++ ++#else ++ ++/* Sonics side: MEMC core registers */ ++typedef volatile struct sbmemcregs { ++ uint32 control; ++ uint32 config; ++ uint32 refresh; ++ uint32 biststat; ++ uint32 modebuf; ++ uint32 bkcls; ++ uint32 priorinv; ++ uint32 dramtim; ++ uint32 intstat; ++ uint32 intmask; ++ uint32 intinfo; ++ uint32 reserved1; ++ uint32 ncdlctl; ++ uint32 rdncdlcor; ++ uint32 wrncdlcor; ++ uint32 miscdlyctl; ++ uint32 dqsgatencdl; ++ uint32 spare; ++ uint32 tpaddr; ++ uint32 tpdata; ++ uint32 barrier; ++ uint32 core; ++} sbmemcregs_t; ++ ++#endif ++ ++/* MEMC Core Init values (OCP ID 0x80f) */ ++ ++/* For sdr: */ ++#define MEMC_SD_CONFIG_INIT 0x00048000 ++#define MEMC_SD_DRAMTIM_INIT 0x000754da ++#define MEMC_SD_RDNCDLCOR_INIT 0x00000000 ++#define MEMC_SD_WRNCDLCOR_INIT 0x49351200 ++#define MEMC_SD1_WRNCDLCOR_INIT 0x14500200 /* For corerev 1 (4712) */ ++#define MEMC_SD_MISCDLYCTL_INIT 0x00061c1b ++#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416 /* For corerev 1 (4712) */ ++#define MEMC_SD_CONTROL_INIT0 0x00000002 ++#define MEMC_SD_CONTROL_INIT1 0x00000008 ++#define MEMC_SD_CONTROL_INIT2 0x00000004 ++#define MEMC_SD_CONTROL_INIT3 0x00000010 ++#define MEMC_SD_CONTROL_INIT4 0x00000001 ++#define MEMC_SD_MODEBUF_INIT 0x00000000 ++#define MEMC_SD_REFRESH_INIT 0x0000840f ++ ++ ++/* This is for SDRM8X8X4 */ ++#define MEMC_SDR_INIT 0x0008 ++#define MEMC_SDR_MODE 0x32 ++#define MEMC_SDR_NCDL 0x00020032 ++#define MEMC_SDR1_NCDL 0x0002020f /* For corerev 1 (4712) */ ++ ++/* For ddr: */ ++#define MEMC_CONFIG_INIT 0x00048000 ++#define MEMC_DRAMTIM_INIT 0x000754d9 ++#define MEMC_RDNCDLCOR_INIT 0x00000000 ++#define MEMC_WRNCDLCOR_INIT 0x49351200 ++#define MEMC_1_WRNCDLCOR_INIT 0x14500200 ++#define MEMC_DQSGATENCDL_INIT 0x00030000 ++#define MEMC_MISCDLYCTL_INIT 0x21061c1b ++#define MEMC_1_MISCDLYCTL_INIT 0x21021400 ++#define MEMC_NCDLCTL_INIT 0x00002001 ++#define MEMC_CONTROL_INIT0 0x00000002 ++#define MEMC_CONTROL_INIT1 0x00000008 ++#define MEMC_MODEBUF_INIT0 0x00004000 ++#define MEMC_CONTROL_INIT2 0x00000010 ++#define MEMC_MODEBUF_INIT1 0x00000100 ++#define MEMC_CONTROL_INIT3 0x00000010 ++#define MEMC_CONTROL_INIT4 0x00000008 ++#define MEMC_REFRESH_INIT 0x0000840f ++#define MEMC_CONTROL_INIT5 0x00000004 ++#define MEMC_MODEBUF_INIT2 0x00000000 ++#define MEMC_CONTROL_INIT6 0x00000010 ++#define MEMC_CONTROL_INIT7 0x00000001 ++ ++ ++/* This is for DDRM16X16X2 */ ++#define MEMC_DDR_INIT 0x0009 ++#define MEMC_DDR_MODE 0x62 ++#define MEMC_DDR_NCDL 0x0005050a ++#define MEMC_DDR1_NCDL 0x00000a0a /* For corerev 1 (4712) */ ++ ++/* mask for sdr/ddr calibration registers */ ++#define MEMC_RDNCDLCOR_RD_MASK 0x000000ff ++#define MEMC_WRNCDLCOR_WR_MASK 0x000000ff ++#define MEMC_DQSGATENCDL_G_MASK 0x000000ff ++ ++/* masks for miscdlyctl registers */ ++#define MEMC_MISC_SM_MASK 0x30000000 ++#define MEMC_MISC_SM_SHIFT 28 ++#define MEMC_MISC_SD_MASK 0x0f000000 ++#define MEMC_MISC_SD_SHIFT 24 ++ ++/* hw threshhold for calculating wr/rd for sdr memc */ ++#define MEMC_CD_THRESHOLD 128 ++ ++/* Low bit of init register says if memc is ddr or sdr */ ++#define MEMC_CONFIG_DDR 0x00000001 ++ ++#endif /* _SBMEMC_H */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbmips.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbmips.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbmips.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbmips.h 2005-08-28 11:12:20.471852920 +0200 +@@ -0,0 +1,56 @@ ++/* ++ * Broadcom SiliconBackplane MIPS definitions ++ * ++ * SB MIPS cores are custom MIPS32 processors with SiliconBackplane ++ * OCP interfaces. The CP0 processor ID is 0x00024000, where bits ++ * 23:16 mean Broadcom and bits 15:8 mean a MIPS core with an OCP ++ * interface. The core revision is stored in the SB ID register in SB ++ * configuration space. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _SBMIPS_H ++#define _SBMIPS_H ++ ++#ifndef _LANGUAGE_ASSEMBLY ++ ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif /* PAD */ ++ ++typedef volatile struct { ++ uint32 corecontrol; ++ uint32 PAD[2]; ++ uint32 biststatus; ++ uint32 PAD[4]; ++ uint32 intstatus; ++ uint32 intmask; ++ uint32 timer; ++} mipsregs_t; ++ ++extern uint32 sb_flag(void *sbh); ++extern uint sb_irq(void *sbh); ++ ++extern void sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)); ++ ++extern void sb_mips_init(void *sbh); ++extern uint32 sb_mips_clock(void *sbh); ++extern bool sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock); ++ ++extern uint32 sb_memc_get_ncdl(void *sbh); ++ ++#endif /* _LANGUAGE_ASSEMBLY */ ++ ++#endif /* _SBMIPS_H */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbpci.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbpci.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbpci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbpci.h 2005-08-28 11:12:20.471852920 +0200 +@@ -0,0 +1,113 @@ ++/* ++ * BCM47XX Sonics SiliconBackplane PCI core hardware definitions. ++ * ++ * $Id$ ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ */ ++ ++#ifndef _SBPCI_H ++#define _SBPCI_H ++ ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif ++ ++/* Sonics side: PCI core and host control registers */ ++typedef struct sbpciregs { ++ uint32 control; /* PCI control */ ++ uint32 PAD[3]; ++ uint32 arbcontrol; /* PCI arbiter control */ ++ uint32 PAD[3]; ++ uint32 intstatus; /* Interrupt status */ ++ uint32 intmask; /* Interrupt mask */ ++ uint32 sbtopcimailbox; /* Sonics to PCI mailbox */ ++ uint32 PAD[9]; ++ uint32 bcastaddr; /* Sonics broadcast address */ ++ uint32 bcastdata; /* Sonics broadcast data */ ++ uint32 PAD[2]; ++ uint32 gpioin; /* ro: gpio input (>=rev2) */ ++ uint32 gpioout; /* rw: gpio output (>=rev2) */ ++ uint32 gpioouten; /* rw: gpio output enable (>= rev2) */ ++ uint32 gpiocontrol; /* rw: gpio control (>= rev2) */ ++ uint32 PAD[36]; ++ uint32 sbtopci0; /* Sonics to PCI translation 0 */ ++ uint32 sbtopci1; /* Sonics to PCI translation 1 */ ++ uint32 sbtopci2; /* Sonics to PCI translation 2 */ ++ uint32 PAD[445]; ++ uint16 sprom[36]; /* SPROM shadow Area */ ++ uint32 PAD[46]; ++} sbpciregs_t; ++ ++/* PCI control */ ++#define PCI_RST_OE 0x01 /* When set, drives PCI_RESET out to pin */ ++#define PCI_RST 0x02 /* Value driven out to pin */ ++#define PCI_CLK_OE 0x04 /* When set, drives clock as gated by PCI_CLK out to pin */ ++#define PCI_CLK 0x08 /* Gate for clock driven out to pin */ ++ ++/* PCI arbiter control */ ++#define PCI_INT_ARB 0x01 /* When set, use an internal arbiter */ ++#define PCI_EXT_ARB 0x02 /* When set, use an external arbiter */ ++#define PCI_PARKID_MASK 0x06 /* Selects which agent is parked on an idle bus */ ++#define PCI_PARKID_SHIFT 1 ++#define PCI_PARKID_LAST 0 /* Last requestor */ ++#define PCI_PARKID_4710 1 /* 4710 */ ++#define PCI_PARKID_EXTREQ0 2 /* External requestor 0 */ ++#define PCI_PARKID_EXTREQ1 3 /* External requestor 1 */ ++ ++/* Interrupt status/mask */ ++#define PCI_INTA 0x01 /* PCI INTA# is asserted */ ++#define PCI_INTB 0x02 /* PCI INTB# is asserted */ ++#define PCI_SERR 0x04 /* PCI SERR# has been asserted (write one to clear) */ ++#define PCI_PERR 0x08 /* PCI PERR# has been asserted (write one to clear) */ ++#define PCI_PME 0x10 /* PCI PME# is asserted */ ++ ++/* (General) PCI/SB mailbox interrupts, two bits per pci function */ ++#define MAILBOX_F0_0 0x100 /* function 0, int 0 */ ++#define MAILBOX_F0_1 0x200 /* function 0, int 1 */ ++#define MAILBOX_F1_0 0x400 /* function 1, int 0 */ ++#define MAILBOX_F1_1 0x800 /* function 1, int 1 */ ++#define MAILBOX_F2_0 0x1000 /* function 2, int 0 */ ++#define MAILBOX_F2_1 0x2000 /* function 2, int 1 */ ++#define MAILBOX_F3_0 0x4000 /* function 3, int 0 */ ++#define MAILBOX_F3_1 0x8000 /* function 3, int 1 */ ++ ++/* Sonics broadcast address */ ++#define BCAST_ADDR_MASK 0xff /* Broadcast register address */ ++ ++/* Sonics to PCI translation types */ ++#define SBTOPCI0_MASK 0xfc000000 ++#define SBTOPCI1_MASK 0xfc000000 ++#define SBTOPCI2_MASK 0xc0000000 ++#define SBTOPCI_MEM 0 ++#define SBTOPCI_IO 1 ++#define SBTOPCI_CFG0 2 ++#define SBTOPCI_CFG1 3 ++#define SBTOPCI_PREF 0x4 /* prefetch enable */ ++#define SBTOPCI_BURST 0x8 /* burst enable */ ++ ++/* PCI side: Reserved PCI configuration registers (see pcicfg.h) */ ++#define cap_list rsvd_a[0] ++#define bar0_window dev_dep[0x80 - 0x40] ++#define bar1_window dev_dep[0x84 - 0x40] ++#define sprom_control dev_dep[0x88 - 0x40] ++ ++#ifndef _LANGUAGE_ASSEMBLY ++ ++extern int sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); ++extern int sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); ++extern void sbpci_ban(uint16 core); ++extern int sbpci_init(void *sbh); ++extern void sbpci_check(void *sbh); ++ ++#endif /* !_LANGUAGE_ASSEMBLY */ ++ ++#endif /* _SBPCI_H */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbpcmcia.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbpcmcia.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbpcmcia.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbpcmcia.h 2005-08-28 11:12:20.472852768 +0200 +@@ -0,0 +1,131 @@ ++/* ++ * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions. ++ * ++ * $Id$ ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ */ ++ ++#ifndef _SBPCMCIA_H ++#define _SBPCMCIA_H ++ ++ ++/* All the addresses that are offsets in attribute space are divided ++ * by two to account for the fact that odd bytes are invalid in ++ * attribute space and our read/write routines make the space appear ++ * as if they didn't exist. Still we want to show the original numbers ++ * as documented in the hnd_pcmcia core manual. ++ */ ++ ++/* PCMCIA Function Configuration Registers */ ++#define PCMCIA_FCR (0x700 / 2) ++ ++#define FCR0_OFF 0 ++#define FCR1_OFF (0x40 / 2) ++#define FCR2_OFF (0x80 / 2) ++#define FCR3_OFF (0xc0 / 2) ++ ++#define PCMCIA_FCR0 (0x700 / 2) ++#define PCMCIA_FCR1 (0x740 / 2) ++#define PCMCIA_FCR2 (0x780 / 2) ++#define PCMCIA_FCR3 (0x7c0 / 2) ++ ++/* Standard PCMCIA FCR registers */ ++ ++#define PCMCIA_COR 0 ++ ++#define COR_RST 0x80 ++#define COR_LEV 0x40 ++#define COR_IRQEN 0x04 ++#define COR_BLREN 0x01 ++#define COR_FUNEN 0x01 ++ ++ ++#define PCICIA_FCSR (2 / 2) ++#define PCICIA_PRR (4 / 2) ++#define PCICIA_SCR (6 / 2) ++#define PCICIA_ESR (8 / 2) ++ ++ ++#define PCM_MEMOFF 0x0000 ++#define F0_MEMOFF 0x1000 ++#define F1_MEMOFF 0x2000 ++#define F2_MEMOFF 0x3000 ++#define F3_MEMOFF 0x4000 ++ ++/* Memory base in the function fcr's */ ++#define MEM_ADDR0 (0x728 / 2) ++#define MEM_ADDR1 (0x72a / 2) ++#define MEM_ADDR2 (0x72c / 2) ++ ++/* PCMCIA base plus Srom access in fcr0: */ ++#define PCMCIA_ADDR0 (0x072e / 2) ++#define PCMCIA_ADDR1 (0x0730 / 2) ++#define PCMCIA_ADDR2 (0x0732 / 2) ++ ++#define MEM_SEG (0x0734 / 2) ++#define SROM_CS (0x0736 / 2) ++#define SROM_DATAL (0x0738 / 2) ++#define SROM_DATAH (0x073a / 2) ++#define SROM_ADDRL (0x073c / 2) ++#define SROM_ADDRH (0x073e / 2) ++ ++/* Values for srom_cs: */ ++#define SROM_IDLE 0 ++#define SROM_WRITE 1 ++#define SROM_READ 2 ++#define SROM_WEN 4 ++#define SROM_WDS 7 ++#define SROM_DONE 8 ++ ++/* CIS stuff */ ++ ++/* The CIS stops where the FCRs start */ ++#define CIS_SIZE PCMCIA_FCR ++ ++/* Standard tuples we know about */ ++ ++#define CISTPL_MANFID 0x20 /* Manufacturer and device id */ ++#define CISTPL_FUNCE 0x22 /* Function extensions */ ++#define CISTPL_CFTABLE 0x1b /* Config table entry */ ++ ++/* Function extensions for LANs */ ++ ++#define LAN_TECH 1 /* Technology type */ ++#define LAN_SPEED 2 /* Raw bit rate */ ++#define LAN_MEDIA 3 /* Transmission media */ ++#define LAN_NID 4 /* Node identification (aka MAC addr) */ ++#define LAN_CONN 5 /* Connector standard */ ++ ++ ++/* CFTable */ ++#define CFTABLE_REGWIN_2K 0x08 /* 2k reg windows size */ ++#define CFTABLE_REGWIN_4K 0x10 /* 4k reg windows size */ ++#define CFTABLE_REGWIN_8K 0x20 /* 8k reg windows size */ ++ ++/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll ++ * take one for HNBU, and use "extensions" (a la FUNCE) within it. ++ */ ++ ++#define CISTPL_BRCM_HNBU 0x80 ++ ++/* Subtypes of BRCM_HNBU: */ ++ ++#define HNBU_CHIPID 0x01 /* Six bytes with PCI vendor & ++ * device id and chiprev ++ */ ++#define HNBU_BOARDREV 0x02 /* Two bytes board revision */ ++#define HNBU_PAPARMS 0x03 /* Eleven bytes PA parameters */ ++#define HNBU_OEM 0x04 /* Eight bytes OEM data */ ++#define HNBU_CC 0x05 /* Default country code */ ++#define HNBU_AA 0x06 /* Antennas available */ ++#define HNBU_AG 0x07 /* Antenna gain */ ++#define HNBU_BOARDFLAGS 0x08 /* board flags */ ++#define HNBU_LED 0x09 /* LED set */ ++ ++#endif /* _SBPCMCIA_H */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbsdram.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbsdram.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbsdram.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbsdram.h 2005-08-28 11:12:20.472852768 +0200 +@@ -0,0 +1,75 @@ ++/* ++ * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _SBSDRAM_H ++#define _SBSDRAM_H ++ ++#ifndef _LANGUAGE_ASSEMBLY ++ ++/* Sonics side: SDRAM core registers */ ++typedef volatile struct sbsdramregs { ++ uint32 initcontrol; /* Generates external SDRAM initialization sequence */ ++ uint32 config; /* Initializes external SDRAM mode register */ ++ uint32 refresh; /* Controls external SDRAM refresh rate */ ++ uint32 pad1; ++ uint32 pad2; ++} sbsdramregs_t; ++ ++#endif ++ ++/* SDRAM initialization control (initcontrol) register bits */ ++#define SDRAM_CBR 0x0001 /* Writing 1 generates refresh cycle and toggles bit */ ++#define SDRAM_PRE 0x0002 /* Writing 1 generates precharge cycle and toggles bit */ ++#define SDRAM_MRS 0x0004 /* Writing 1 generates mode register select cycle and toggles bit */ ++#define SDRAM_EN 0x0008 /* When set, enables access to SDRAM */ ++#define SDRAM_16Mb 0x0000 /* Use 16 Megabit SDRAM */ ++#define SDRAM_64Mb 0x0010 /* Use 64 Megabit SDRAM */ ++#define SDRAM_128Mb 0x0020 /* Use 128 Megabit SDRAM */ ++#define SDRAM_RSVMb 0x0030 /* Use special SDRAM */ ++#define SDRAM_RST 0x0080 /* Writing 1 causes soft reset of controller */ ++#define SDRAM_SELFREF 0x0100 /* Writing 1 enables self refresh mode */ ++#define SDRAM_PWRDOWN 0x0200 /* Writing 1 causes controller to power down */ ++#define SDRAM_32BIT 0x0400 /* When set, indicates 32 bit SDRAM interface */ ++#define SDRAM_9BITCOL 0x0800 /* When set, indicates 9 bit column */ ++ ++/* SDRAM configuration (config) register bits */ ++#define SDRAM_BURSTFULL 0x0000 /* Use full page bursts */ ++#define SDRAM_BURST8 0x0001 /* Use burst of 8 */ ++#define SDRAM_BURST4 0x0002 /* Use burst of 4 */ ++#define SDRAM_BURST2 0x0003 /* Use burst of 2 */ ++#define SDRAM_CAS3 0x0000 /* Use CAS latency of 3 */ ++#define SDRAM_CAS2 0x0004 /* Use CAS latency of 2 */ ++ ++/* SDRAM refresh control (refresh) register bits */ ++#define SDRAM_REF(p) (((p)&0xff) | SDRAM_REF_EN) /* Refresh period */ ++#define SDRAM_REF_EN 0x8000 /* Writing 1 enables periodic refresh */ ++ ++/* SDRAM Core default Init values (OCP ID 0x803) */ ++#define SDRAM_INIT MEM4MX16X2 ++#define SDRAM_CONFIG SDRAM_BURSTFULL ++#define SDRAM_REFRESH SDRAM_REF(0x40) ++ ++#define MEM1MX16 0x009 /* 2 MB */ ++#define MEM1MX16X2 0x409 /* 4 MB */ ++#define MEM2MX8X2 0x809 /* 4 MB */ ++#define MEM2MX8X4 0xc09 /* 8 MB */ ++#define MEM2MX32 0x439 /* 8 MB */ ++#define MEM4MX16 0x019 /* 8 MB */ ++#define MEM4MX16X2 0x419 /* 16 MB */ ++#define MEM8MX8X2 0x819 /* 16 MB */ ++#define MEM8MX16 0x829 /* 16 MB */ ++#define MEM4MX32 0x429 /* 16 MB */ ++#define MEM8MX8X4 0xc19 /* 32 MB */ ++#define MEM8MX16X2 0xc29 /* 32 MB */ ++ ++#endif /* _SBSDRAM_H */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbutils.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbutils.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sbutils.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sbutils.h 2005-08-28 11:12:20.473852616 +0200 +@@ -0,0 +1,90 @@ ++/* ++ * Misc utility routines for accessing chip-specific features ++ * of Broadcom HNBU SiliconBackplane-based chips. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _sbutils_h_ ++#define _sbutils_h_ ++ ++/* Board styles (bustype) */ ++#define BOARDSTYLE_SOC 0 /* Silicon Backplane */ ++#define BOARDSTYLE_PCI 1 /* PCI/MiniPCI board */ ++#define BOARDSTYLE_PCMCIA 2 /* PCMCIA board */ ++#define BOARDSTYLE_CARDBUS 3 /* Cardbus board */ ++ ++/* ++ * Many of the routines below take an 'sbh' handle as their first arg. ++ * Allocate this by calling sb_attach(). Free it by calling sb_detach(). ++ * At any one time, the sbh is logically focused on one particular sb core ++ * (the "current core"). ++ * Use sb_setcore() or sb_setcoreidx() to change the association to another core. ++ */ ++ ++/* exported externs */ ++extern void *sb_attach(uint pcidev, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz); ++extern void *sb_kattach(void); ++extern void sb_detach(void *sbh); ++extern uint sb_chip(void *sbh); ++extern uint sb_chiprev(void *sbh); ++extern uint sb_chippkg(void *sbh); ++extern uint sb_boardvendor(void *sbh); ++extern uint sb_boardtype(void *sbh); ++extern uint sb_boardstyle(void *sbh); ++extern uint sb_bus(void *sbh); ++extern uint sb_corelist(void *sbh, uint coreid[]); ++extern uint sb_coreid(void *sbh); ++extern uint sb_coreidx(void *sbh); ++extern uint sb_coreunit(void *sbh); ++extern uint sb_corevendor(void *sbh); ++extern uint sb_corerev(void *sbh); ++extern void *sb_coreregs(void *sbh); ++extern uint32 sb_coreflags(void *sbh, uint32 mask, uint32 val); ++extern uint32 sb_coreflagshi(void *sbh, uint32 mask, uint32 val); ++extern bool sb_iscoreup(void *sbh); ++extern void *sb_setcoreidx(void *sbh, uint coreidx); ++extern void *sb_setcore(void *sbh, uint coreid, uint coreunit); ++extern void sb_commit(void *sbh); ++extern uint32 sb_base(uint32 admatch); ++extern uint32 sb_size(uint32 admatch); ++extern void sb_core_reset(void *sbh, uint32 bits); ++extern void sb_core_tofixup(void *sbh); ++extern void sb_core_disable(void *sbh, uint32 bits); ++extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m); ++extern uint32 sb_clock(void *sbh); ++extern void sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask); ++extern void sb_pcmcia_init(void *sbh); ++extern void sb_watchdog(void *sbh, uint ticks); ++extern void *sb_gpiosetcore(void *sbh); ++extern uint32 sb_gpiocontrol(void *sbh, uint32 mask, uint32 val); ++extern uint32 sb_gpioouten(void *sbh, uint32 mask, uint32 val); ++extern uint32 sb_gpioout(void *sbh, uint32 mask, uint32 val); ++extern uint32 sb_gpioin(void *sbh); ++extern uint32 sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val); ++extern uint32 sb_gpiointmask(void *sbh, uint32 mask, uint32 val); ++extern bool sb_taclear(void *sbh); ++extern void sb_pwrctl_init(void *sbh); ++extern uint16 sb_pwrctl_fast_pwrup_delay(void *sbh); ++extern bool sb_pwrctl_clk(void *sbh, uint mode); ++extern int sb_pwrctl_xtal(void *sbh, uint what, bool on); ++extern void sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intr_arg); ++ ++/* pwrctl xtal what flags */ ++#define XTAL 0x1 /* primary crystal oscillator (2050) */ ++#define PLL 0x2 /* main chip pll */ ++ ++/* pwrctl clk mode */ ++#define CLK_FAST 0 /* force fast (pll) clock */ ++#define CLK_SLOW 1 /* force slow clock */ ++#define CLK_DYNAMIC 2 /* enable dynamic power control */ ++ ++#endif /* _sbutils_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sflash.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sflash.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/sflash.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/sflash.h 2005-08-28 11:12:20.473852616 +0200 +@@ -0,0 +1,46 @@ ++/* ++ * Broadcom SiliconBackplane chipcommon serial flash interface ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _sflash_h_ ++#define _sflash_h_ ++ ++#include <typedefs.h> ++#include <sbchipc.h> ++ ++/* GPIO based bank selection (1 GPIO bit) */ ++#define SFLASH_MAX_BANKS 1 ++#define SFLASH_GPIO_SHIFT 2 ++#define SFLASH_GPIO_MASK ((SFLASH_MAX_BANKS - 1) << SFLASH_GPIO_SHIFT) ++ ++struct sflash_bank { ++ uint offset; /* Byte offset */ ++ uint erasesize; /* Block size */ ++ uint numblocks; /* Number of blocks */ ++ uint size; /* Total bank size in bytes */ ++}; ++ ++struct sflash { ++ struct sflash_bank banks[SFLASH_MAX_BANKS]; /* GPIO selectable banks */ ++ uint32 type; /* Type */ ++ uint size; /* Total array size in bytes */ ++}; ++ ++/* Utility functions */ ++extern int sflash_poll(chipcregs_t *cc, uint offset); ++extern int sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf); ++extern int sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf); ++extern int sflash_erase(chipcregs_t *cc, uint offset); ++extern struct sflash * sflash_init(chipcregs_t *cc); ++ ++#endif /* _sflash_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/trxhdr.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/trxhdr.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/trxhdr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/trxhdr.h 2005-08-28 11:12:20.474852464 +0200 +@@ -0,0 +1,31 @@ ++/* ++ * TRX image file header format. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include <typedefs.h> ++ ++#define TRX_MAGIC 0x30524448 /* "HDR0" */ ++#define TRX_VERSION 1 ++#define TRX_MAX_LEN 0x3A0000 ++#define TRX_NO_HEADER 1 /* Do not write TRX header */ ++ ++struct trx_header { ++ uint32 magic; /* "HDR0" */ ++ uint32 len; /* Length of file including header */ ++ uint32 crc32; /* 32-bit CRC from flag_version to end of file */ ++ uint32 flag_version; /* 0:15 flags, 16:31 version */ ++ uint32 offsets[3]; /* Offsets of partitions from start of header */ ++}; ++ ++/* Compatibility */ ++typedef struct trx_header TRXHDR, *PTRXHDR; +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/typedefs.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/typedefs.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/typedefs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/typedefs.h 2005-08-28 11:12:20.474852464 +0200 +@@ -0,0 +1,162 @@ ++/* ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ ++ ++#ifndef _TYPEDEFS_H_ ++#define _TYPEDEFS_H_ ++ ++/*----------------------- define TRUE, FALSE, NULL, bool ----------------*/ ++#ifdef __cplusplus ++ ++#ifndef FALSE ++#define FALSE false ++#endif ++#ifndef TRUE ++#define TRUE true ++#endif ++ ++#else /* !__cplusplus */ ++ ++#if defined(_WIN32) ++ ++typedef unsigned char bool; ++ ++#else ++ ++#if defined(MACOSX) && defined(KERNEL) ++#include <IOKit/IOTypes.h> ++#else ++typedef int bool; ++#endif ++ ++#endif ++ ++#ifndef FALSE ++#define FALSE 0 ++#endif ++#ifndef TRUE ++#define TRUE 1 ++ ++#ifndef NULL ++#define NULL 0 ++#endif ++ ++#endif ++ ++#endif /* __cplusplus */ ++ ++#ifndef OFF ++#define OFF 0 ++#endif ++ ++#ifndef ON ++#define ON 1 ++#endif ++ ++/*----------------------- define uchar, ushort, uint, ulong ----------------*/ ++ ++typedef unsigned char uchar; ++ ++#if defined(_WIN32) || defined(PMON) || defined(__MRC__) || defined(V2_HAL) || defined(_CFE_) ++ ++#ifndef V2_HAL ++typedef unsigned short ushort; ++#endif ++ ++typedef unsigned int uint; ++typedef unsigned long ulong; ++ ++#else ++ ++/* pick up ushort & uint from standard types.h */ ++#if defined(linux) && defined(__KERNEL__) ++#include <linux/types.h> /* sys/types.h and linux/types.h are oil and water */ ++#else ++#include <sys/types.h> ++#if !defined(TARGETENV_sun4) && !defined(linux) ++typedef unsigned long ulong; ++#endif /* TARGETENV_sun4 */ ++#endif ++#if defined(PMON) ++typedef unsigned int uint; ++typedef unsigned long long uint64; ++#endif ++ ++#endif /* WIN32 || PMON || .. */ ++ ++/*----------------------- define [u]int8/16/32/64 --------------------------*/ ++ ++ ++#ifdef V2_HAL ++#include <bcmos.h> ++#else ++typedef signed char int8; ++typedef signed short int16; ++typedef signed int int32; ++ ++typedef unsigned char uint8; ++typedef unsigned short uint16; ++typedef unsigned int uint32; ++#endif /* V2_HAL */ ++ ++typedef float float32; ++typedef double float64; ++ ++/* ++ * abstracted floating point type allows for compile time selection of ++ * single or double precision arithmetic. Compiling with -DFLOAT32 ++ * selects single precision; the default is double precision. ++ */ ++ ++#if defined(FLOAT32) ++typedef float32 float_t; ++#else /* default to double precision floating point */ ++typedef float64 float_t; ++#endif /* FLOAT32 */ ++ ++#ifdef _MSC_VER /* Microsoft C */ ++typedef signed __int64 int64; ++typedef unsigned __int64 uint64; ++ ++#elif defined(__GNUC__) && !defined(__STRICT_ANSI__) ++/* gcc understands signed/unsigned 64 bit types, but complains in ANSI mode */ ++typedef signed long long int64; ++typedef unsigned long long uint64; ++ ++#elif defined(__ICL) && !defined(__STDC__) ++/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode */ ++typedef unsigned long long uint64; ++ ++#endif /* _MSC_VER */ ++ ++ ++/*----------------------- define PTRSZ, INLINE --------------------------*/ ++ ++#define PTRSZ sizeof (char*) ++ ++#ifndef INLINE ++ ++#ifdef _MSC_VER ++ ++#define INLINE __inline ++ ++#elif __GNUC__ ++ ++#define INLINE __inline__ ++ ++#else ++ ++#define INLINE ++ ++#endif /* _MSC_VER */ ++ ++#endif /* INLINE */ ++ ++#endif /* _TYPEDEFS_H_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/wlioctl.h linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/wlioctl.h +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/include/wlioctl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/include/wlioctl.h 2005-08-28 11:12:20.475852312 +0200 +@@ -0,0 +1,690 @@ ++/* ++ * Custom OID/ioctl definitions for ++ * Broadcom 802.11abg Networking Device Driver ++ * ++ * Definitions subject to change without notice. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _wlioctl_h_ ++#define _wlioctl_h_ ++ ++#include <typedefs.h> ++#include <proto/ethernet.h> ++#include <proto/802.11.h> ++ ++#if defined(__GNUC__) ++#define PACKED __attribute__((packed)) ++#else ++#define PACKED ++#endif ++ ++/* ++ * Per-bss information structure. ++ */ ++ ++#define WL_NUMRATES 255 /* max # of rates in a rateset */ ++ ++typedef struct wl_rateset { ++ uint32 count; /* # rates in this set */ ++ uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ ++} wl_rateset_t; ++ ++#define WL_LEGACY_BSS_INFO_VERSION 106 /* an older supported version of wl_bss_info struct */ ++#define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */ ++ ++typedef struct wl_bss_info106 { ++ uint version; /* version field */ ++ struct ether_addr BSSID; ++ uint8 SSID_len; ++ uint8 SSID[32]; ++ uint8 Privacy; /* 0=No WEP, 1=Use WEP */ ++ int16 RSSI; /* receive signal strength (in dBm) */ ++ uint16 beacon_period; /* units are Kusec */ ++ uint16 atim_window; /* units are Kusec */ ++ uint8 channel; /* Channel no. */ ++ int8 infra; /* 0=IBSS, 1=infrastructure, 2=unknown */ ++ struct { ++ uint count; /* # rates in this set */ ++ uint8 rates[12]; /* rates in 500kbps units w/hi bit set if basic */ ++ } rateset; /* supported rates */ ++ uint8 dtim_period; /* DTIM period */ ++ int8 phy_noise; /* noise right after tx (in dBm) */ ++ uint16 capability; /* Capability information */ ++ struct dot11_bcn_prb *prb; /* probe response frame (ioctl na) */ ++ uint16 prb_len; /* probe response frame length (ioctl na) */ ++ struct { ++ uint8 supported; /* wpa supported */ ++ uint8 multicast; /* multicast cipher */ ++ uint8 ucount; /* count of unicast ciphers */ ++ uint8 unicast[4]; /* unicast ciphers */ ++ uint8 acount; /* count of auth modes */ ++ uint8 auth[4]; /* Authentication modes */ ++ } wpa; ++} wl_bss_info106_t; ++ ++typedef struct wl_bss_info { ++ uint32 version; /* version field */ ++ uint32 length; /* byte length of data in this record, starting at version and including IEs */ ++ struct ether_addr BSSID; ++ uint16 beacon_period; /* units are Kusec */ ++ uint16 capability; /* Capability information */ ++ uint8 SSID_len; ++ uint8 SSID[32]; ++ struct { ++ uint count; /* # rates in this set */ ++ uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ ++ } rateset; /* supported rates */ ++ uint8 channel; /* Channel no. */ ++ uint16 atim_window; /* units are Kusec */ ++ uint8 dtim_period; /* DTIM period */ ++ int16 RSSI; /* receive signal strength (in dBm) */ ++ int8 phy_noise; /* noise (in dBm) */ ++ uint32 ie_length; /* byte length of Information Elements */ ++ /* variable length Information Elements */ ++} wl_bss_info_t; ++ ++typedef struct wl_scan_results { ++ uint32 buflen; ++ uint32 version; ++ uint32 count; ++ wl_bss_info_t bss_info[1]; ++} wl_scan_results_t; ++/* size of wl_scan_results not including variable length array */ ++#define WL_SCAN_RESULTS_FIXED_SIZE 12 ++ ++/* uint32 list */ ++typedef struct wl_uint32_list { ++ /* in - # of elements, out - # of entries */ ++ uint32 count; ++ /* variable length uint32 list */ ++ uint32 element[1]; ++} wl_uint32_list_t; ++ ++typedef struct wlc_ssid { ++ uint32 SSID_len; ++ uchar SSID[32]; ++} wlc_ssid_t; ++ ++#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */ ++ ++typedef struct wl_channels_in_country { ++ uint32 buflen; ++ uint32 band; ++ char country_abbrev[WLC_CNTRY_BUF_SZ]; ++ uint32 count; ++ uint32 channel[1]; ++} wl_channels_in_country_t; ++ ++typedef struct wl_country_list { ++ uint32 buflen; ++ uint32 band_set; ++ uint32 band; ++ uint32 count; ++ char country_abbrev[1]; ++} wl_country_list_t; ++ ++ ++/* ++* Maximum # of keys that wl driver supports in S/W. Keys supported ++* in H/W is less than or equal to WSEC_MAX_KEYS. ++*/ ++#define WSEC_MAX_KEYS 54 /* Max # of keys (50 + 4 default keys) */ ++#define WSEC_MAX_DEFAULT_KEYS 4 /* # of default keys */ ++ ++/* ++* Remove these two defines if access to crypto/tkhash.h ++* is unconditionally permitted. ++*/ ++#define TKHASH_P1_KEY_SIZE 10 /* size of TKHash Phase1 output, in bytes */ ++#define TKHASH_P2_KEY_SIZE 16 /* size of TKHash Phase2 output */ ++ ++/* Enumerate crypto algorithms */ ++#define CRYPTO_ALGO_OFF 0 ++#define CRYPTO_ALGO_WEP1 1 ++#define CRYPTO_ALGO_TKIP 2 ++#define CRYPTO_ALGO_WEP128 3 ++#define CRYPTO_ALGO_AES_CCM 4 ++#define CRYPTO_ALGO_AES_OCB_MSDU 5 ++#define CRYPTO_ALGO_AES_OCB_MPDU 6 ++#define CRYPTO_ALGO_NALG 7 ++ ++/* For use with wlc_wep_key.flags */ ++#define WSEC_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ ++#define WSEC_TKIP_ERROR (1 << 2) /* Provoke deliberate MIC error */ ++#define WSEC_REPLAY_ERROR (1 << 3) /* Provoke deliberate replay */ ++ ++#define WSEC_GEN_MIC_ERROR 0x0001 ++#define WSEC_GEN_REPLAY 0x0002 ++ ++typedef struct tkip_info { ++ uint16 phase1[TKHASH_P1_KEY_SIZE/sizeof(uint16)]; /* tkhash phase1 result */ ++ uint8 phase2[TKHASH_P2_KEY_SIZE]; /* tkhash phase2 result */ ++ uint32 micl; ++ uint32 micr; ++} tkip_info_t; ++ ++typedef struct wsec_iv { ++ uint32 hi; /* upper 32 bits of IV */ ++ uint16 lo; /* lower 16 bits of IV */ ++} wsec_iv_t; ++ ++typedef struct wsec_key { ++ uint32 index; /* key index */ ++ uint32 len; /* key length */ ++ uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */ ++ tkip_info_t tkip_tx; /* tkip transmit state */ ++ tkip_info_t tkip_rx; /* tkip receive state */ ++ uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ ++ uint32 flags; /* misc flags */ ++ uint32 algo_hw; /* cache for hw register*/ ++ uint32 aes_mode; /* cache for hw register*/ ++ int iv_len; /* IV length */ ++ int iv_initialized; /* has IV been initialized already? */ ++ int icv_len; /* ICV length */ ++ wsec_iv_t rxiv; /* Rx IV */ ++ wsec_iv_t txiv; /* Tx IV */ ++ struct ether_addr ea; /* per station */ ++} wsec_key_t; ++ ++/* wireless security bitvec */ ++#define WEP_ENABLED 1 ++#define TKIP_ENABLED 2 ++#define AES_ENABLED 4 ++#define WSEC_SWFLAG 8 ++ ++#define WSEC_SW(wsec) ((wsec) & WSEC_SWFLAG) ++#define WSEC_HW(wsec) (!WSEC_SW(wsec)) ++#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED) ++#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED) ++#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED) ++#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED)) ++ ++/* wireless authentication bit vector */ ++#define WPA_ENABLED 1 ++#define PSK_ENABLED 2 ++ ++#define WAUTH_WPA_ENABLED(wauth) ((wauth) & WPA_ENABLED) ++#define WAUTH_PSK_ENABLED(wauth) ((wauth) & PSK_ENABLED) ++#define WAUTH_ENABLED(wauth) ((wauth) & (WPA_ENABLED | PSK_ENABLED)) ++ ++/* group/mcast cipher */ ++#define WPA_MCAST_CIPHER(wsec) (((wsec) & TKIP_ENABLED) ? WPA_CIPHER_TKIP : \ ++ ((wsec) & AES_ENABLED) ? WPA_CIPHER_AES_CCM : \ ++ WPA_CIPHER_NONE) ++ ++typedef struct wl_led_info { ++ uint32 index; /* led index */ ++ uint32 behavior; ++ bool activehi; ++} wl_led_info_t; ++ ++/* ++ * definitions for driver messages passed from WL to NAS. ++ */ ++/* Use this to recognize wpa and 802.1x driver messages. */ ++static const uint8 wl_wpa_snap_template[] = ++ { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c }; ++ ++#define WL_WPA_MSG_IFNAME_MAX 16 ++ ++/* WPA driver message */ ++typedef struct wl_wpa_header { ++ struct ether_header eth; ++ struct dot11_llc_snap_header snap; ++ uint8 version; ++ uint8 type; ++ /* version 2 additions */ ++ char ifname[WL_WPA_MSG_IFNAME_MAX]; ++ /* version specific data */ ++ /* uint8 data[1]; */ ++} wl_wpa_header_t PACKED; ++ ++#define WL_WPA_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) ++ ++/* WPA driver message ethertype - private between wlc and nas */ ++#define WL_WPA_ETHER_TYPE 0x9999 ++ ++/* WPA driver message current version */ ++#define WL_WPA_MSG_VERSION 2 ++ ++/* Type field values for the 802.2 driver messages for WPA. */ ++#define WLC_ASSOC_MSG 1 ++#define WLC_DISASSOC_MSG 2 ++#define WLC_PTK_MIC_MSG 3 ++#define WLC_GTK_MIC_MSG 4 ++ ++/* 802.1x driver message */ ++typedef struct wl_eapol_header { ++ struct ether_header eth; ++ struct dot11_llc_snap_header snap; ++ uint8 version; ++ uint8 reserved; ++ char ifname[WL_WPA_MSG_IFNAME_MAX]; ++ /* version specific data */ ++ /* uint8 802_1x_msg[1]; */ ++} wl_eapol_header_t PACKED; ++ ++#define WL_EAPOL_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) ++ ++/* 802.1x driver message ethertype - private between wlc and nas */ ++#define WL_EAPOL_ETHER_TYPE 0x999A ++ ++/* 802.1x driver message current version */ ++#define WL_EAPOL_MSG_VERSION 1 ++ ++/* srom read/write struct passed through ioctl */ ++typedef struct { ++ uint byteoff; /* byte offset */ ++ uint nbytes; /* number of bytes */ ++ uint16 buf[1]; ++} srom_rw_t; ++ ++/* R_REG and W_REG struct passed through ioctl */ ++typedef struct { ++ uint32 byteoff; /* byte offset of the field in d11regs_t */ ++ uint32 val; /* read/write value of the field */ ++ uint32 size; /* sizeof the field */ ++} rw_reg_t; ++ ++/* Structure used by GET/SET_ATTEN ioctls */ ++typedef struct { ++ uint16 auto_ctrl; /* 1: Automatic control, 0: overriden */ ++ uint16 bb; /* Baseband attenuation */ ++ uint16 radio; /* Radio attenuation */ ++ uint16 txctl1; /* Radio TX_CTL1 value */ ++} atten_t; ++ ++/* Used to get specific STA parameters */ ++typedef struct { ++ uint32 val; ++ struct ether_addr ea; ++} scb_val_t; ++ ++/* callback registration data types */ ++ ++typedef struct _mac_event_params { ++ uint msg; ++ struct ether_addr *addr; ++ uint result; ++ uint status; ++ uint auth_type; ++} mac_event_params_t; ++ ++typedef struct _mic_error_params { ++ struct ether_addr *ea; ++ bool group; ++ bool flush_txq; ++} mic_error_params_t; ++ ++typedef enum _wl_callback { ++ WL_MAC_EVENT_CALLBACK = 0, ++ WL_LINK_UP_CALLBACK, ++ WL_LINK_DOWN_CALLBACK, ++ WL_MIC_ERROR_CALLBACK, ++ WL_LAST_CALLBACK ++} wl_callback_t; ++ ++typedef struct _callback { ++ void (*fn)(void *, void *); ++ void *context; ++} callback_t; ++ ++typedef struct _scan_callback { ++ void (*fn)(void *); ++ void *context; ++} scan_callback_t; ++ ++/* used to register an arbitrary callback via the IOCTL interface */ ++typedef struct _set_callback { ++ int index; ++ callback_t callback; ++} set_callback_t; ++ ++/* ++ * Country locale determines which channels are available to us. ++ */ ++typedef enum _wlc_locale { ++ WLC_WW = 0, /* Worldwide */ ++ WLC_THA, /* Thailand */ ++ WLC_ISR, /* Israel */ ++ WLC_JDN, /* Jordan */ ++ WLC_PRC, /* China */ ++ WLC_JPN, /* Japan */ ++ WLC_FCC, /* USA */ ++ WLC_EUR, /* Europe */ ++ WLC_USL, /* US Low Band only */ ++ WLC_JPH, /* Japan High Band only */ ++ WLC_ALL, /* All the channels in this band */ ++ WLC_11D, /* Represents locale recieved by 11d beacons */ ++ WLC_LAST_LOCALE, ++ WLC_UNDEFINED_LOCALE = 0xf ++} wlc_locale_t; ++ ++/* channel encoding */ ++typedef struct channel_info { ++ int hw_channel; ++ int target_channel; ++ int scan_channel; ++} channel_info_t; ++ ++/* For ioctls that take a list of MAC addresses */ ++struct maclist { ++ uint count; /* number of MAC addresses */ ++ struct ether_addr ea[1]; /* variable length array of MAC addresses */ ++}; ++ ++/* get pkt count struct passed through ioctl */ ++typedef struct get_pktcnt { ++ uint rx_good_pkt; ++ uint rx_bad_pkt; ++ uint tx_good_pkt; ++ uint tx_bad_pkt; ++} get_pktcnt_t; ++ ++/* Linux network driver ioctl encoding */ ++typedef struct wl_ioctl { ++ int cmd; /* common ioctl definition */ ++ void *buf; /* pointer to user buffer */ ++ int len; /* length of user buffer */ ++} wl_ioctl_t; ++ ++/* ++ * Structure for passing hardware and software ++ * revision info up from the driver. ++ */ ++typedef struct wlc_rev_info { ++ uint vendorid; /* PCI vendor id */ ++ uint deviceid; /* device id of chip */ ++ uint radiorev; /* radio revision */ ++ uint chiprev; /* chip revision */ ++ uint corerev; /* core revision */ ++ uint boardid; /* board identifier (usu. PCI sub-device id) */ ++ uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */ ++ uint boardrev; /* board revision */ ++ uint driverrev; /* driver version */ ++ uint ucoderev; /* microcode version */ ++ uint bus; /* bus type */ ++ uint chipnum; /* chip number */ ++} wlc_rev_info_t; ++ ++/* check this magic number */ ++#define WLC_IOCTL_MAGIC 0x14e46c77 ++ ++/* bump this number if you change the ioctl interface */ ++#define WLC_IOCTL_VERSION 1 ++ ++/* maximum length buffer required */ ++#define WLC_IOCTL_MAXLEN 8192 ++ ++/* common ioctl definitions */ ++#define WLC_GET_MAGIC 0 ++#define WLC_GET_VERSION 1 ++#define WLC_UP 2 ++#define WLC_DOWN 3 ++#define WLC_DUMP 6 ++#define WLC_GET_MSGLEVEL 7 ++#define WLC_SET_MSGLEVEL 8 ++#define WLC_GET_PROMISC 9 ++#define WLC_SET_PROMISC 10 ++#define WLC_GET_RATE 12 ++#define WLC_SET_RATE 13 ++#define WLC_GET_INSTANCE 14 ++#define WLC_GET_FRAG 15 ++#define WLC_SET_FRAG 16 ++#define WLC_GET_RTS 17 ++#define WLC_SET_RTS 18 ++#define WLC_GET_INFRA 19 ++#define WLC_SET_INFRA 20 ++#define WLC_GET_AUTH 21 ++#define WLC_SET_AUTH 22 ++#define WLC_GET_BSSID 23 ++#define WLC_SET_BSSID 24 ++#define WLC_GET_SSID 25 ++#define WLC_SET_SSID 26 ++#define WLC_RESTART 27 ++#define WLC_GET_CHANNEL 29 ++#define WLC_SET_CHANNEL 30 ++#define WLC_GET_SRL 31 ++#define WLC_SET_SRL 32 ++#define WLC_GET_LRL 33 ++#define WLC_SET_LRL 34 ++#define WLC_GET_PLCPHDR 35 ++#define WLC_SET_PLCPHDR 36 ++#define WLC_GET_RADIO 37 ++#define WLC_SET_RADIO 38 ++#define WLC_GET_PHYTYPE 39 ++#define WLC_GET_WEP 42 ++#define WLC_SET_WEP 43 ++#define WLC_GET_KEY 44 ++#define WLC_SET_KEY 45 ++#define WLC_SCAN 50 ++#define WLC_SCAN_RESULTS 51 ++#define WLC_DISASSOC 52 ++#define WLC_REASSOC 53 ++#define WLC_GET_ROAM_TRIGGER 54 ++#define WLC_SET_ROAM_TRIGGER 55 ++#define WLC_GET_TXANT 61 ++#define WLC_SET_TXANT 62 ++#define WLC_GET_ANTDIV 63 ++#define WLC_SET_ANTDIV 64 ++#define WLC_GET_TXPWR 65 ++#define WLC_SET_TXPWR 66 ++#define WLC_GET_CLOSED 67 ++#define WLC_SET_CLOSED 68 ++#define WLC_GET_MACLIST 69 ++#define WLC_SET_MACLIST 70 ++#define WLC_GET_RATESET 71 ++#define WLC_SET_RATESET 72 ++#define WLC_GET_LOCALE 73 ++#define WLC_SET_LOCALE 74 ++#define WLC_GET_BCNPRD 75 ++#define WLC_SET_BCNPRD 76 ++#define WLC_GET_DTIMPRD 77 ++#define WLC_SET_DTIMPRD 78 ++#define WLC_GET_SROM 79 ++#define WLC_SET_SROM 80 ++#define WLC_GET_WEP_RESTRICT 81 ++#define WLC_SET_WEP_RESTRICT 82 ++#define WLC_GET_COUNTRY 83 ++#define WLC_SET_COUNTRY 84 ++#define WLC_GET_REVINFO 98 ++#define WLC_GET_MACMODE 105 ++#define WLC_SET_MACMODE 106 ++#define WLC_GET_GMODE 109 ++#define WLC_SET_GMODE 110 ++#define WLC_GET_CURR_RATESET 114 /* current rateset */ ++#define WLC_GET_SCANSUPPRESS 115 ++#define WLC_SET_SCANSUPPRESS 116 ++#define WLC_GET_AP 117 ++#define WLC_SET_AP 118 ++#define WLC_GET_EAP_RESTRICT 119 ++#define WLC_SET_EAP_RESTRICT 120 ++#define WLC_GET_WDSLIST 123 ++#define WLC_SET_WDSLIST 124 ++#define WLC_GET_RSSI 127 ++#define WLC_GET_WSEC 133 ++#define WLC_SET_WSEC 134 ++#define WLC_GET_BSS_INFO 136 ++#define WLC_GET_LAZYWDS 138 ++#define WLC_SET_LAZYWDS 139 ++#define WLC_GET_BANDLIST 140 ++#define WLC_GET_BAND 141 ++#define WLC_SET_BAND 142 ++#define WLC_GET_SHORTSLOT 144 ++#define WLC_GET_SHORTSLOT_OVERRIDE 145 ++#define WLC_SET_SHORTSLOT_OVERRIDE 146 ++#define WLC_GET_SHORTSLOT_RESTRICT 147 ++#define WLC_SET_SHORTSLOT_RESTRICT 148 ++#define WLC_GET_GMODE_PROTECTION 149 ++#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 ++#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 ++#define WLC_UPGRADE 152 ++#define WLC_GET_ASSOCLIST 159 ++#define WLC_GET_CLK 160 ++#define WLC_SET_CLK 161 ++#define WLC_GET_UP 162 ++#define WLC_OUT 163 ++#define WLC_GET_WPA_AUTH 164 ++#define WLC_SET_WPA_AUTH 165 ++#define WLC_GET_GMODE_PROTECTION_CONTROL 178 ++#define WLC_SET_GMODE_PROTECTION_CONTROL 179 ++#define WLC_GET_PHYLIST 180 ++#define WLC_GET_GMODE_PROTECTION_CTS 198 ++#define WLC_SET_GMODE_PROTECTION_CTS 199 ++#define WLC_GET_PIOMODE 203 ++#define WLC_SET_PIOMODE 204 ++#define WLC_SET_LED 209 ++#define WLC_GET_LED 210 ++#define WLC_GET_CHANNEL_SEL 215 ++#define WLC_START_CHANNEL_SEL 216 ++#define WLC_GET_VALID_CHANNELS 217 ++#define WLC_GET_FAKEFRAG 218 ++#define WLC_SET_FAKEFRAG 219 ++#define WLC_GET_WET 230 ++#define WLC_SET_WET 231 ++#define WLC_GET_KEY_PRIMARY 235 ++#define WLC_SET_KEY_PRIMARY 236 ++#define WLC_SCAN_WITH_CALLBACK 240 ++#define WLC_SET_CS_SCAN_TIMER 248 ++#define WLC_GET_CS_SCAN_TIMER 249 ++#define WLC_CURRENT_PWR 256 ++#define WLC_GET_CHANNELS_IN_COUNTRY 260 ++#define WLC_GET_COUNTRY_LIST 261 ++#define WLC_NVRAM_GET 264 ++#define WLC_NVRAM_SET 265 ++#define WLC_LAST 271 /* bump after adding */ ++ ++/* ++ * Minor kludge alert: ++ * Duplicate a few definitions that irelay requires from epiioctl.h here ++ * so caller doesn't have to include this file and epiioctl.h . ++ * If this grows any more, it would be time to move these irelay-specific ++ * definitions out of the epiioctl.h and into a separate driver common file. ++ */ ++#ifndef EPICTRL_COOKIE ++#define EPICTRL_COOKIE 0xABADCEDE ++#endif ++ ++/* vx wlc ioctl's offset */ ++#define CMN_IOCTL_OFF 0x180 ++ ++/* ++ * custom OID support ++ * ++ * 0xFF - implementation specific OID ++ * 0xE4 - first byte of Broadcom PCI vendor ID ++ * 0x14 - second byte of Broadcom PCI vendor ID ++ * 0xXX - the custom OID number ++ */ ++ ++/* begin 0x1f values beyond the start of the ET driver range. */ ++#define WL_OID_BASE 0xFFE41420 ++ ++/* NDIS overrides */ ++#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE) ++ ++#define WL_DECRYPT_STATUS_SUCCESS 1 ++#define WL_DECRYPT_STATUS_FAILURE 2 ++#define WL_DECRYPT_STATUS_UNKNOWN 3 ++ ++/* allows user-mode app to poll the status of USB image upgrade */ ++#define WLC_UPGRADE_SUCCESS 0 ++#define WLC_UPGRADE_PENDING 1 ++ ++/* Bit masks for radio disabled status - returned by WL_GET_RADIO */ ++#define WL_RADIO_SW_DISABLE (1<<0) ++#define WL_RADIO_HW_DISABLE (1<<1) ++ ++/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ ++#define WL_TXPWR_OVERRIDE (1<<31) ++ ++ ++/* Bus types */ ++#define WL_SB_BUS 0 /* Silicon Backplane */ ++#define WL_PCI_BUS 1 /* PCI target */ ++#define WL_PCMCIA_BUS 2 /* PCMCIA target */ ++ ++/* band types */ ++#define WLC_BAND_AUTO 0 /* auto-select */ ++#define WLC_BAND_A 1 /* "a" band (5 Ghz) */ ++#define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */ ++ ++/* MAC list modes */ ++#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ ++#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ ++#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ ++ ++/* ++ * ++ */ ++#define GMODE_LEGACY_B 0 ++#define GMODE_AUTO 1 ++#define GMODE_ONLY 2 ++#define GMODE_B_DEFERRED 3 ++#define GMODE_PERFORMANCE 4 ++#define GMODE_LRS 5 ++#define GMODE_MAX 6 ++ ++/* values for PLCPHdr_override */ ++#define WLC_PLCP_AUTO -1 ++#define WLC_PLCP_SHORT 0 ++#define WLC_PLCP_LONG 1 ++ ++/* values for g_protection_override */ ++#define WLC_G_PROTECTION_AUTO -1 ++#define WLC_G_PROTECTION_OFF 0 ++#define WLC_G_PROTECTION_ON 1 ++ ++/* values for g_protection_control */ ++#define WLC_G_PROTECTION_CTL_OFF 0 ++#define WLC_G_PROTECTION_CTL_LOCAL 1 ++#define WLC_G_PROTECTION_CTL_OVERLAP 2 ++ ++ ++ ++ ++ ++ ++/* max # of leds supported by GPIO (gpio pin# == led index#) */ ++#define WL_LED_NUMGPIO 16 /* gpio 0-15 */ ++ ++/* led per-pin behaviors */ ++#define WL_LED_OFF 0 /* always off */ ++#define WL_LED_ON 1 /* always on */ ++#define WL_LED_ACTIVITY 2 /* activity */ ++#define WL_LED_RADIO 3 /* radio enabled */ ++#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */ ++#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */ ++#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */ ++#define WL_LED_WI1 7 ++#define WL_LED_WI2 8 ++#define WL_LED_WI3 9 ++#define WL_LED_ASSOC 10 /* associated state indicator */ ++#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */ ++#define WL_LED_NUMBEHAVIOR 12 ++ ++/* led behavior numeric value format */ ++#define WL_LED_BEH_MASK 0x7f /* behavior mask */ ++#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */ ++ ++ ++/* rate check */ ++#define WL_RATE_OFDM(r) (((r) & 0x7f) == 12 || ((r) & 0x7f) == 18 || \ ++ ((r) & 0x7f) == 24 || ((r) & 0x7f) == 36 || \ ++ ((r) & 0x7f) == 48 || ((r) & 0x7f) == 72 || \ ++ ((r) & 0x7f) == 96 || ((r) & 0x7f) == 108) ++ ++ ++#undef PACKED ++ ++#endif /* _wlioctl_h_ */ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/linux_osl.c linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/linux_osl.c +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/linux_osl.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/linux_osl.c 2005-08-28 11:12:20.476852160 +0200 +@@ -0,0 +1,420 @@ ++/* ++ * Linux OS Independent Layer ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#define LINUX_OSL ++ ++#include <typedefs.h> ++#include <bcmendian.h> ++#include <linuxver.h> ++#include <linux_osl.h> ++#include <bcmutils.h> ++#include <linux/delay.h> ++#ifdef mips ++#include <asm/paccess.h> ++#endif ++#include <pcicfg.h> ++ ++#define PCI_CFG_RETRY 10 ++ ++void* ++osl_pktget(void *drv, uint len, bool send) ++{ ++ struct sk_buff *skb; ++ ++ if ((skb = dev_alloc_skb(len)) == NULL) ++ return (NULL); ++ ++ skb_put(skb, len); ++ ++ /* ensure the cookie field is cleared */ ++ PKTSETCOOKIE(skb, NULL); ++ ++ return ((void*) skb); ++} ++ ++void ++osl_pktfree(void *p) ++{ ++ struct sk_buff *skb, *nskb; ++ ++ skb = (struct sk_buff*) p; ++ ++ /* perversion: we use skb->next to chain multi-skb packets */ ++ while (skb) { ++ nskb = skb->next; ++ skb->next = NULL; ++ if (skb->destructor) { ++ /* cannot kfree_skb() on hard IRQ (net/core/skbuff.c) if destructor exists */ ++ dev_kfree_skb_any(skb); ++ } else { ++ /* can free immediately (even in_irq()) if destructor does not exist */ ++ dev_kfree_skb(skb); ++ } ++ skb = nskb; ++ } ++} ++ ++uint32 ++osl_pci_read_config(void *loc, uint offset, uint size) ++{ ++ struct pci_dev *pdev; ++ uint val; ++ uint retry=PCI_CFG_RETRY; ++ ++ /* only 4byte access supported */ ++ ASSERT(size == 4); ++ ++ pdev = (struct pci_dev*)loc; ++ do { ++ pci_read_config_dword(pdev, offset, &val); ++ if (val != 0xffffffff) ++ break; ++ } while (retry--); ++ ++ ++ return (val); ++} ++ ++void ++osl_pci_write_config(void *loc, uint offset, uint size, uint val) ++{ ++ struct pci_dev *pdev; ++ uint retry=PCI_CFG_RETRY; ++ ++ /* only 4byte access supported */ ++ ASSERT(size == 4); ++ ++ pdev = (struct pci_dev*)loc; ++ ++ do { ++ pci_write_config_dword(pdev, offset, val); ++ if (offset!=PCI_BAR0_WIN) ++ break; ++ if (osl_pci_read_config(loc,offset,size) == val) ++ break; ++ } while (retry--); ++ ++} ++ ++void ++osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size) ++{ ++ ASSERT(0); ++} ++ ++void ++osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size) ++{ ++ ASSERT(0); ++} ++ ++void ++osl_assert(char *exp, char *file, int line) ++{ ++ char tempbuf[255]; ++ ++ sprintf(tempbuf, "assertion \"%s\" failed: file \"%s\", line %d\n", exp, file, line); ++ panic(tempbuf); ++} ++ ++/* ++ * BINOSL selects the slightly slower function-call-based binary compatible osl. ++ */ ++#ifdef BINOSL ++ ++int ++osl_printf(const char *format, ...) ++{ ++ va_list args; ++ char buf[1024]; ++ int len; ++ ++ /* sprintf into a local buffer because there *is* no "vprintk()".. */ ++ va_start(args, format); ++ len = vsprintf(buf, format, args); ++ va_end(args); ++ ++ if (len > sizeof (buf)) { ++ printk("osl_printf: buffer overrun\n"); ++ return (0); ++ } ++ ++ return (printk(buf)); ++} ++ ++int ++osl_sprintf(char *buf, const char *format, ...) ++{ ++ va_list args; ++ int rc; ++ ++ va_start(args, format); ++ rc = vsprintf(buf, format, args); ++ va_end(args); ++ return (rc); ++} ++ ++int ++osl_strcmp(const char *s1, const char *s2) ++{ ++ return (strcmp(s1, s2)); ++} ++ ++int ++osl_strncmp(const char *s1, const char *s2, uint n) ++{ ++ return (strncmp(s1, s2, n)); ++} ++ ++int ++osl_strlen(char *s) ++{ ++ return (strlen(s)); ++} ++ ++char* ++osl_strcpy(char *d, const char *s) ++{ ++ return (strcpy(d, s)); ++} ++ ++char* ++osl_strncpy(char *d, const char *s, uint n) ++{ ++ return (strncpy(d, s, n)); ++} ++ ++void ++bcopy(const void *src, void *dst, int len) ++{ ++ memcpy(dst, src, len); ++} ++ ++int ++bcmp(const void *b1, const void *b2, int len) ++{ ++ return (memcmp(b1, b2, len)); ++} ++ ++void ++bzero(void *b, int len) ++{ ++ memset(b, '\0', len); ++} ++ ++void* ++osl_malloc(uint size) ++{ ++ return (kmalloc(size, GFP_ATOMIC)); ++} ++ ++void ++osl_mfree(void *addr, uint size) ++{ ++ kfree(addr); ++} ++ ++uint32 ++osl_readl(volatile uint32 *r) ++{ ++ return (readl(r)); ++} ++ ++uint16 ++osl_readw(volatile uint16 *r) ++{ ++ return (readw(r)); ++} ++ ++uint8 ++osl_readb(volatile uint8 *r) ++{ ++ return (readb(r)); ++} ++ ++void ++osl_writel(uint32 v, volatile uint32 *r) ++{ ++ writel(v, r); ++} ++ ++void ++osl_writew(uint16 v, volatile uint16 *r) ++{ ++ writew(v, r); ++} ++ ++void ++osl_writeb(uint8 v, volatile uint8 *r) ++{ ++ writeb(v, r); ++} ++ ++void * ++osl_uncached(void *va) ++{ ++#ifdef mips ++ return ((void*)KSEG1ADDR(va)); ++#else ++ return ((void*)va); ++#endif ++} ++ ++uint ++osl_getcycles(void) ++{ ++ uint cycles; ++ ++#if defined(mips) ++ cycles = read_c0_count() * 2; ++#elif defined(__i386__) ++ rdtscl(cycles); ++#else ++ cycles = 0; ++#endif ++ return cycles; ++} ++ ++void * ++osl_reg_map(uint32 pa, uint size) ++{ ++ return (ioremap_nocache((unsigned long)pa, (unsigned long)size)); ++} ++ ++void ++osl_reg_unmap(void *va) ++{ ++ iounmap(va); ++} ++ ++int ++osl_busprobe(uint32 *val, uint32 addr) ++{ ++#ifdef mips ++ return get_dbe(*val, (uint32*)addr); ++#else ++ *val = readl(addr); ++ return 0; ++#endif ++} ++ ++void* ++osl_dma_alloc_consistent(void *dev, uint size, ulong *pap) ++{ ++ return (pci_alloc_consistent((struct pci_dev*)dev, size, (dma_addr_t*)pap)); ++} ++ ++void ++osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa) ++{ ++ pci_free_consistent((struct pci_dev*)dev, size, va, (dma_addr_t)pa); ++} ++ ++uint ++osl_dma_map(void *dev, void *va, uint size, int direction) ++{ ++ int dir; ++ ++ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE; ++ return (pci_map_single(dev, va, size, dir)); ++} ++ ++void ++osl_dma_unmap(void *dev, uint pa, uint size, int direction) ++{ ++ int dir; ++ ++ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE; ++ pci_unmap_single(dev, (uint32)pa, size, dir); ++} ++ ++void ++osl_delay(uint usec) ++{ ++ udelay(usec); ++} ++ ++uchar* ++osl_pktdata(void *drv, void *skb) ++{ ++ return (((struct sk_buff*)skb)->data); ++} ++ ++uint ++osl_pktlen(void *drv, void *skb) ++{ ++ return (((struct sk_buff*)skb)->len); ++} ++ ++void* ++osl_pktnext(void *drv, void *skb) ++{ ++ return (((struct sk_buff*)skb)->next); ++} ++ ++void ++osl_pktsetnext(void *skb, void *x) ++{ ++ ((struct sk_buff*)skb)->next = (struct sk_buff*)x; ++} ++ ++void ++osl_pktsetlen(void *drv, void *skb, uint len) ++{ ++ __skb_trim((struct sk_buff*)skb, len); ++} ++ ++uchar* ++osl_pktpush(void *drv, void *skb, int bytes) ++{ ++ return (skb_push((struct sk_buff*)skb, bytes)); ++} ++ ++uchar* ++osl_pktpull(void *drv, void *skb, int bytes) ++{ ++ return (skb_pull((struct sk_buff*)skb, bytes)); ++} ++ ++void* ++osl_pktdup(void *drv, void *skb) ++{ ++ return (skb_clone((struct sk_buff*)skb, GFP_ATOMIC)); ++} ++ ++void* ++osl_pktcookie(void *skb) ++{ ++ return ((void*)((struct sk_buff*)skb)->csum); ++} ++ ++void ++osl_pktsetcookie(void *skb, void *x) ++{ ++ ((struct sk_buff*)skb)->csum = (uint)x; ++} ++ ++void* ++osl_pktlink(void *skb) ++{ ++ return (((struct sk_buff*)skb)->prev); ++} ++ ++void ++osl_pktsetlink(void *skb, void *x) ++{ ++ ((struct sk_buff*)skb)->prev = (struct sk_buff*)x; ++} ++ ++#endif +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/sbmips.c linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/sbmips.c +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/sbmips.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/sbmips.c 2005-08-28 11:12:20.478851856 +0200 +@@ -0,0 +1,950 @@ ++/* ++ * BCM47XX Sonics SiliconBackplane MIPS core routines ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include <typedefs.h> ++#include <osl.h> ++#include <sbutils.h> ++#include <bcmdevs.h> ++#include <bcmnvram.h> ++#include <bcmutils.h> ++#include <hndmips.h> ++#include <sbconfig.h> ++#include <sbextif.h> ++#include <sbchipc.h> ++#include <sbmemc.h> ++ ++/* ++ * Memory segments (32bit kernel mode addresses) ++ */ ++#undef KUSEG ++#undef KSEG0 ++#undef KSEG1 ++#undef KSEG2 ++#undef KSEG3 ++#define KUSEG 0x00000000 ++#define KSEG0 0x80000000 ++#define KSEG1 0xa0000000 ++#define KSEG2 0xc0000000 ++#define KSEG3 0xe0000000 ++ ++/* ++ * Map an address to a certain kernel segment ++ */ ++#undef KSEG0ADDR ++#undef KSEG1ADDR ++#undef KSEG2ADDR ++#undef KSEG3ADDR ++#define KSEG0ADDR(a) (((a) & 0x1fffffff) | KSEG0) ++#define KSEG1ADDR(a) (((a) & 0x1fffffff) | KSEG1) ++#define KSEG2ADDR(a) (((a) & 0x1fffffff) | KSEG2) ++#define KSEG3ADDR(a) (((a) & 0x1fffffff) | KSEG3) ++ ++/* ++ * The following macros are especially useful for __asm__ ++ * inline assembler. ++ */ ++#ifndef __STR ++#define __STR(x) #x ++#endif ++#ifndef STR ++#define STR(x) __STR(x) ++#endif ++ ++/* ********************************************************************* ++ * CP0 Registers ++ ********************************************************************* */ ++ ++#define C0_INX 0 /* CP0: TLB Index */ ++#define C0_RAND 1 /* CP0: TLB Random */ ++#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */ ++#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */ ++#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */ ++#define C0_CTEXT 4 /* CP0: Context */ ++#define C0_PGMASK 5 /* CP0: TLB PageMask */ ++#define C0_WIRED 6 /* CP0: TLB Wired */ ++#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */ ++#define C0_COUNT 9 /* CP0: Count */ ++#define C0_TLBHI 10 /* CP0: TLB EntryHi */ ++#define C0_COMPARE 11 /* CP0: Compare */ ++#define C0_SR 12 /* CP0: Processor Status */ ++#define C0_STATUS C0_SR /* CP0: Processor Status */ ++#define C0_CAUSE 13 /* CP0: Exception Cause */ ++#define C0_EPC 14 /* CP0: Exception PC */ ++#define C0_PRID 15 /* CP0: Processor Revision Indentifier */ ++#define C0_CONFIG 16 /* CP0: Config */ ++#define C0_LLADDR 17 /* CP0: LLAddr */ ++#define C0_WATCHLO 18 /* CP0: WatchpointLo */ ++#define C0_WATCHHI 19 /* CP0: WatchpointHi */ ++#define C0_XCTEXT 20 /* CP0: XContext */ ++#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */ ++#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */ ++#define C0_ECC 26 /* CP0: ECC */ ++#define C0_CACHEERR 27 /* CP0: CacheErr */ ++#define C0_TAGLO 28 /* CP0: TagLo */ ++#define C0_TAGHI 29 /* CP0: TagHi */ ++#define C0_ERREPC 30 /* CP0: ErrorEPC */ ++ ++/* ++ * Macros to access the system control coprocessor ++ */ ++ ++#define MFC0(source, sel) \ ++({ \ ++ int __res; \ ++ __asm__ __volatile__( \ ++ ".set\tnoreorder\n\t" \ ++ ".set\tnoat\n\t" \ ++ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \ ++ "move\t%0,$1\n\t" \ ++ ".set\tat\n\t" \ ++ ".set\treorder" \ ++ :"=r" (__res) \ ++ : \ ++ :"$1"); \ ++ __res; \ ++}) ++ ++#define MTC0(source, sel, value) \ ++do { \ ++ __asm__ __volatile__( \ ++ ".set\tnoreorder\n\t" \ ++ ".set\tnoat\n\t" \ ++ "move\t$1,%z0\n\t" \ ++ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \ ++ ".set\tat\n\t" \ ++ ".set\treorder" \ ++ : \ ++ :"Jr" (value) \ ++ :"$1"); \ ++} while (0) ++ ++/* ++ * R4x00 interrupt enable / cause bits ++ */ ++#undef IE_SW0 ++#undef IE_SW1 ++#undef IE_IRQ0 ++#undef IE_IRQ1 ++#undef IE_IRQ2 ++#undef IE_IRQ3 ++#undef IE_IRQ4 ++#undef IE_IRQ5 ++#define IE_SW0 (1<< 8) ++#define IE_SW1 (1<< 9) ++#define IE_IRQ0 (1<<10) ++#define IE_IRQ1 (1<<11) ++#define IE_IRQ2 (1<<12) ++#define IE_IRQ3 (1<<13) ++#define IE_IRQ4 (1<<14) ++#define IE_IRQ5 (1<<15) ++ ++/* ++ * Bitfields in the R4xx0 cp0 status register ++ */ ++#define ST0_IE 0x00000001 ++#define ST0_EXL 0x00000002 ++#define ST0_ERL 0x00000004 ++#define ST0_KSU 0x00000018 ++# define KSU_USER 0x00000010 ++# define KSU_SUPERVISOR 0x00000008 ++# define KSU_KERNEL 0x00000000 ++#define ST0_UX 0x00000020 ++#define ST0_SX 0x00000040 ++#define ST0_KX 0x00000080 ++#define ST0_DE 0x00010000 ++#define ST0_CE 0x00020000 ++ ++/* ++ * Status register bits available in all MIPS CPUs. ++ */ ++#define ST0_IM 0x0000ff00 ++#define ST0_CH 0x00040000 ++#define ST0_SR 0x00100000 ++#define ST0_TS 0x00200000 ++#define ST0_BEV 0x00400000 ++#define ST0_RE 0x02000000 ++#define ST0_FR 0x04000000 ++#define ST0_CU 0xf0000000 ++#define ST0_CU0 0x10000000 ++#define ST0_CU1 0x20000000 ++#define ST0_CU2 0x40000000 ++#define ST0_CU3 0x80000000 ++#define ST0_XX 0x80000000 /* MIPS IV naming */ ++ ++/* ++ * Cache Operations ++ */ ++ ++#ifndef Fill_I ++#define Fill_I 0x14 ++#endif ++ ++#define cache_unroll(base,op) \ ++ __asm__ __volatile__(" \ ++ .set noreorder; \ ++ .set mips3; \ ++ cache %1, (%0); \ ++ .set mips0; \ ++ .set reorder" \ ++ : \ ++ : "r" (base), \ ++ "i" (op)); ++ ++/* ++ * These are the UART port assignments, expressed as offsets from the base ++ * register. These assignments should hold for any serial port based on ++ * a 8250, 16450, or 16550(A). ++ */ ++ ++#define UART_MCR 4 /* Out: Modem Control Register */ ++#define UART_MSR 6 /* In: Modem Status Register */ ++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ ++ ++/* ++ * Returns TRUE if an external UART exists at the given base ++ * register. ++ */ ++static bool ++serial_exists(uint8 *regs) ++{ ++ uint8 save_mcr, status1; ++ ++ save_mcr = R_REG(®s[UART_MCR]); ++ W_REG(®s[UART_MCR], UART_MCR_LOOP | 0x0a); ++ status1 = R_REG(®s[UART_MSR]) & 0xf0; ++ W_REG(®s[UART_MCR], save_mcr); ++ ++ return (status1 == 0x90); ++} ++ ++/* ++ * Initializes UART access. The callback function will be called once ++ * per found UART. ++*/ ++void ++sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)) ++{ ++ void *regs; ++ ulong base; ++ uint irq; ++ int i, n; ++ ++ if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) { ++ extifregs_t *eir = (extifregs_t *) regs; ++ sbconfig_t *sb; ++ ++ /* Determine external UART register base */ ++ sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF); ++ base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1))); ++ ++ /* Determine IRQ */ ++ irq = sb_irq(sbh); ++ ++ /* Disable GPIO interrupt initially */ ++ W_REG(&eir->gpiointpolarity, 0); ++ W_REG(&eir->gpiointmask, 0); ++ ++ /* Search for external UARTs */ ++ n = 2; ++ for (i = 0; i < 2; i++) { ++ regs = (void *) REG_MAP(base + (i * 8), 8); ++ if (serial_exists(regs)) { ++ /* Set GPIO 1 to be the external UART IRQ */ ++ W_REG(&eir->gpiointmask, 2); ++ if (add) ++ add(regs, irq, 13500000, 0); ++ } ++ } ++ ++ /* Add internal UART if enabled */ ++ if (R_REG(&eir->corecontrol) & CC_UE) ++ if (add) ++ add((void *) &eir->uartdata, irq, sb_clock(sbh), 2); ++ } else if ((regs = sb_setcore(sbh, SB_CC, 0))) { ++ chipcregs_t *cc = (chipcregs_t *) regs; ++ uint32 rev, cap, pll, baud_base, div; ++ ++ /* Determine core revision and capabilities */ ++ rev = sb_corerev(sbh); ++ cap = R_REG(&cc->capabilities); ++ pll = cap & CAP_PLL_MASK; ++ ++ /* Determine IRQ */ ++ irq = sb_irq(sbh); ++ ++ if (pll == PLL_TYPE1) { ++ /* PLL clock */ ++ baud_base = sb_clock_rate(pll, ++ R_REG(&cc->clockcontrol_n), ++ R_REG(&cc->clockcontrol_m2)); ++ div = 1; ++ } else if (rev >= 3) { ++ /* Internal backplane clock */ ++ baud_base = sb_clock_rate(pll, ++ R_REG(&cc->clockcontrol_n), ++ R_REG(&cc->clockcontrol_sb)); ++ div = 2; /* Minimum divisor */ ++ W_REG(&cc->uart_clkdiv, div); ++ } else { ++ /* Fixed internal backplane clock */ ++ baud_base = 88000000; ++ div = 48; ++ } ++ ++ /* Clock source depends on strapping if UartClkOverride is unset */ ++ if ((rev > 0) && ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) { ++ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) { ++ /* Internal divided backplane clock */ ++ baud_base /= div; ++ } else { ++ /* Assume external clock of 1.8432 MHz */ ++ baud_base = 1843200; ++ } ++ } ++ ++ /* Add internal UARTs */ ++ n = cap & CAP_UARTS_MASK; ++ for (i = 0; i < n; i++) { ++ /* Register offset changed after revision 0 */ ++ if (rev) ++ regs = (void *)((ulong) &cc->uart0data + (i * 256)); ++ else ++ regs = (void *)((ulong) &cc->uart0data + (i * 8)); ++ ++ if (add) ++ add(regs, irq, baud_base, 0); ++ } ++ } ++} ++ ++/* Returns the SB interrupt flag of the current core. */ ++uint32 ++sb_flag(void *sbh) ++{ ++ void *regs; ++ sbconfig_t *sb; ++ ++ regs = sb_coreregs(sbh); ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ ++ return (R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK); ++} ++ ++static const uint32 sbips_int_mask[] = { ++ 0, ++ SBIPS_INT1_MASK, ++ SBIPS_INT2_MASK, ++ SBIPS_INT3_MASK, ++ SBIPS_INT4_MASK ++}; ++ ++static const uint32 sbips_int_shift[] = { ++ 0, ++ 0, ++ SBIPS_INT2_SHIFT, ++ SBIPS_INT3_SHIFT, ++ SBIPS_INT4_SHIFT ++}; ++ ++/* ++ * Returns the MIPS IRQ assignment of the current core. If unassigned, ++ * 0 is returned. ++ */ ++uint ++sb_irq(void *sbh) ++{ ++ uint idx; ++ void *regs; ++ sbconfig_t *sb; ++ uint32 flag, sbipsflag; ++ uint irq = 0; ++ ++ flag = sb_flag(sbh); ++ ++ idx = sb_coreidx(sbh); ++ ++ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) || ++ (regs = sb_setcore(sbh, SB_MIPS33, 0))) { ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ ++ /* sbipsflag specifies which core is routed to interrupts 1 to 4 */ ++ sbipsflag = R_REG(&sb->sbipsflag); ++ for (irq = 1; irq <= 4; irq++) { ++ if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag) ++ break; ++ } ++ if (irq == 5) ++ irq = 0; ++ } ++ ++ sb_setcoreidx(sbh, idx); ++ ++ return irq; ++} ++ ++/* Clears the specified MIPS IRQ. */ ++static void ++sb_clearirq(void *sbh, uint irq) ++{ ++ void *regs; ++ sbconfig_t *sb; ++ ++ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && ++ !(regs = sb_setcore(sbh, SB_MIPS33, 0))) ++ ASSERT(regs); ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ ++ if (irq == 0) ++ W_REG(&sb->sbintvec, 0); ++ else ++ OR_REG(&sb->sbipsflag, sbips_int_mask[irq]); ++} ++ ++/* ++ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS ++ * IRQ 0 may be assigned more than once. ++ */ ++static void ++sb_setirq(void *sbh, uint irq, uint coreid, uint coreunit) ++{ ++ void *regs; ++ sbconfig_t *sb; ++ uint32 flag; ++ ++ regs = sb_setcore(sbh, coreid, coreunit); ++ ASSERT(regs); ++ flag = sb_flag(sbh); ++ ++ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && ++ !(regs = sb_setcore(sbh, SB_MIPS33, 0))) ++ ASSERT(regs); ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ ++ if (irq == 0) ++ OR_REG(&sb->sbintvec, 1 << flag); ++ else { ++ flag <<= sbips_int_shift[irq]; ++ ASSERT(!(flag & ~sbips_int_mask[irq])); ++ flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq]; ++ W_REG(&sb->sbipsflag, flag); ++ } ++} ++ ++/* ++ * Initializes clocks and interrupts. SB and NVRAM access must be ++ * initialized prior to calling. ++ */ ++void ++sb_mips_init(void *sbh) ++{ ++ ulong hz, ns, tmp; ++ extifregs_t *eir; ++ chipcregs_t *cc; ++ char *value; ++ uint irq; ++ ++ /* Figure out current SB clock speed */ ++ if ((hz = sb_clock(sbh)) == 0) ++ hz = 100000000; ++ ns = 1000000000 / hz; ++ ++ /* Setup external interface timing */ ++ if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) { ++ /* Initialize extif so we can get to the LEDs and external UART */ ++ W_REG(&eir->prog_config, CF_EN); ++ ++ /* Set timing for the flash */ ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */ ++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ ++ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ ++ ++ /* Set programmable interface timing for external uart */ ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */ ++ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */ ++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ ++ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ ++ } else if ((cc = sb_setcore(sbh, SB_CC, 0))) { ++ /* Set timing for the flash */ ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */ ++ tmp |= CEIL(120, ns); /* W0 = 120nS */ ++ W_REG(&cc->parallelflashwaitcnt, tmp); ++ ++ W_REG(&cc->cs01memwaitcnt, tmp); ++ } ++ ++ /* Chip specific initialization */ ++ switch (sb_chip(sbh)) { ++ case BCM4710_DEVICE_ID: ++ /* Clear interrupt map */ ++ for (irq = 0; irq <= 4; irq++) ++ sb_clearirq(sbh, irq); ++ sb_setirq(sbh, 0, SB_CODEC, 0); ++ sb_setirq(sbh, 0, SB_EXTIF, 0); ++ sb_setirq(sbh, 2, SB_ENET, 1); ++ sb_setirq(sbh, 3, SB_ILINE20, 0); ++ sb_setirq(sbh, 4, SB_PCI, 0); ++ ASSERT(eir); ++ value = nvram_get("et0phyaddr"); ++ if (value && !strcmp(value, "31")) { ++ /* Enable internal UART */ ++ W_REG(&eir->corecontrol, CC_UE); ++ /* Give USB its own interrupt */ ++ sb_setirq(sbh, 1, SB_USB, 0); ++ } else { ++ /* Disable internal UART */ ++ W_REG(&eir->corecontrol, 0); ++ /* Give Ethernet its own interrupt */ ++ sb_setirq(sbh, 1, SB_ENET, 0); ++ sb_setirq(sbh, 0, SB_USB, 0); ++ } ++ break; ++ case BCM4310_DEVICE_ID: ++ MTC0(C0_BROADCOM, 0, MFC0(C0_BROADCOM, 0) & ~(1 << 22)); ++ break; ++ } ++} ++ ++uint32 ++sb_mips_clock(void *sbh) ++{ ++ extifregs_t *eir; ++ chipcregs_t *cc; ++ uint32 n, m; ++ uint idx; ++ uint32 pll_type, rate = 0; ++ ++ /* get index of the current core */ ++ idx = sb_coreidx(sbh); ++ pll_type = PLL_TYPE1; ++ ++ /* switch to extif or chipc core */ ++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { ++ n = R_REG(&eir->clockcontrol_n); ++ m = R_REG(&eir->clockcontrol_sb); ++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { ++ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; ++ n = R_REG(&cc->clockcontrol_n); ++ if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4)) ++ m = R_REG(&cc->clockcontrol_mips); ++ else if (pll_type == PLL_TYPE3) { ++ rate = 200000000; ++ goto out; ++ } else ++ m = R_REG(&cc->clockcontrol_sb); ++ } else ++ goto out; ++ ++ /* calculate rate */ ++ rate = sb_clock_rate(pll_type, n, m); ++ ++out: ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); ++ ++ return rate; ++} ++ ++static void ++icache_probe(int *size, int *lsize) ++{ ++ uint32 config1; ++ uint sets, ways; ++ ++ config1 = MFC0(C0_CONFIG, 1); ++ ++ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */ ++ if ((*lsize = ((config1 >> 19) & 7))) ++ *lsize = 2 << *lsize; ++ sets = 64 << ((config1 >> 22) & 7); ++ ways = 1 + ((config1 >> 16) & 7); ++ *size = *lsize * sets * ways; ++} ++ ++#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) ++ ++static void ++handler(void) ++{ ++ /* Step 11 */ ++ __asm__ ( ++ ".set\tmips32\n\t" ++ "ssnop\n\t" ++ "ssnop\n\t" ++ /* Disable interrupts */ ++ /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */ ++ "mfc0 $15, $12\n\t" ++ "and $15, $15, -31746\n\t" ++ "mtc0 $15, $12\n\t" ++ "eret\n\t" ++ "nop\n\t" ++ "nop\n\t" ++ ".set\tmips0" ++ ); ++} ++ ++/* The following MUST come right after handler() */ ++static void ++afterhandler(void) ++{ ++} ++ ++/* ++ * Set the MIPS, backplane and PCI clocks as closely as possible. ++ */ ++bool ++sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock) ++{ ++ extifregs_t *eir = NULL; ++ chipcregs_t *cc = NULL; ++ mipsregs_t *mipsr = NULL; ++ volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci; ++ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, new_ratio; ++ uint32 pll_type, sync_mode; ++ uint idx, i; ++ struct { ++ uint32 mipsclock; ++ uint16 n; ++ uint32 sb; ++ uint32 pci33; ++ uint32 pci25; ++ } type1_table[] = { ++ { 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, /* 96.000 32.000 24.000 */ ++ { 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, /* 100.000 33.333 25.000 */ ++ { 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, /* 104.000 31.200 24.960 */ ++ { 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, /* 108.000 32.400 24.923 */ ++ { 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, /* 112.000 32.000 24.889 */ ++ { 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, /* 115.200 32.000 24.000 */ ++ { 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, /* 120.000 30.000 24.000 */ ++ { 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, /* 124.800 31.200 24.960 */ ++ { 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, /* 128.000 32.000 24.000 */ ++ { 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, /* 132.000 33.000 24.750 */ ++ { 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, /* 136.000 32.640 24.727 */ ++ { 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, /* 140.000 30.000 24.706 */ ++ { 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, /* 144.000 30.857 24.686 */ ++ { 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, /* 150.857 33.000 24.000 */ ++ { 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, /* 152.000 32.571 24.000 */ ++ { 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, /* 156.000 31.200 24.960 */ ++ { 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, /* 160.000 32.000 24.000 */ ++ { 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, /* 163.200 32.640 24.727 */ ++ { 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, /* 168.000 32.000 24.889 */ ++ { 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, /* 176.000 33.000 24.000 */ ++ }; ++ typedef struct { ++ uint32 mipsclock; ++ uint32 sbclock; ++ uint16 n; ++ uint32 sb; ++ uint32 pci33; ++ uint32 m2; ++ uint32 m3; ++ uint32 ratio; ++ uint32 ratio_parm; ++ } n4m_table_t; ++ ++ n4m_table_t type2_table[] = { ++ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, ++ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0303, 0x01000000, 0x01000600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 }, ++ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, ++ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, ++ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, ++ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, ++ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, ++ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 }, ++ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, ++ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, ++ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, ++ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 }, ++ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, ++ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 }, ++ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, ++ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 } ++ }; ++ ++ n4m_table_t type4_table[] = { ++ { 192000000, 96000000, 0x0702, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 }, ++ { 216000000, 108000000, 0x0211, 0x11020005, 0x11030303, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 }, ++ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x11030305, 0x04000005, 0x94, 0x012a00a9 }, ++ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 }, ++ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 0x21, 0x0aaa0555 }, ++ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 }, ++ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 }, ++ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 0x73, 0x254a14a9 }, ++ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 }, ++ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 }, ++ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 0x52, 0x02520129 } ++ }; ++ uint icache_size, ic_lsize; ++ ulong start, end, dst; ++ bool ret = FALSE; ++ ++ /* get index of the current core */ ++ idx = sb_coreidx(sbh); ++ ++ /* switch to extif or chipc core */ ++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { ++ pll_type = PLL_TYPE1; ++ clockcontrol_n = &eir->clockcontrol_n; ++ clockcontrol_sb = &eir->clockcontrol_sb; ++ clockcontrol_pci = &eir->clockcontrol_pci; ++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { ++ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; ++ clockcontrol_n = &cc->clockcontrol_n; ++ clockcontrol_sb = &cc->clockcontrol_sb; ++ clockcontrol_pci = &cc->clockcontrol_pci; ++ } else ++ goto done; ++ ++ /* Store the current clock register values */ ++ orig_n = R_REG(clockcontrol_n); ++ orig_sb = R_REG(clockcontrol_sb); ++ orig_pci = R_REG(clockcontrol_pci); ++ ++ if (pll_type == PLL_TYPE1) { ++ /* Keep the current PCI clock if not specified */ ++ if (pciclock == 0) { ++ pciclock = sb_clock_rate(pll_type, R_REG(clockcontrol_n), R_REG(clockcontrol_pci)); ++ pciclock = (pciclock <= 25000000) ? 25000000 : 33000000; ++ } ++ ++ /* Search for the closest MIPS clock less than or equal to a preferred value */ ++ for (i = 0; i < ARRAYSIZE(type1_table); i++) { ++ ASSERT(type1_table[i].mipsclock == ++ sb_clock_rate(pll_type, type1_table[i].n, type1_table[i].sb)); ++ if (type1_table[i].mipsclock > mipsclock) ++ break; ++ } ++ if (i == 0) { ++ ret = FALSE; ++ goto done; ++ } else { ++ ret = TRUE; ++ i--; ++ } ++ ASSERT(type1_table[i].mipsclock <= mipsclock); ++ ++ /* No PLL change */ ++ if ((orig_n == type1_table[i].n) && ++ (orig_sb == type1_table[i].sb) && ++ (orig_pci == type1_table[i].pci33)) ++ goto done; ++ ++ /* Set the PLL controls */ ++ W_REG(clockcontrol_n, type1_table[i].n); ++ W_REG(clockcontrol_sb, type1_table[i].sb); ++ if (pciclock == 25000000) ++ W_REG(clockcontrol_pci, type1_table[i].pci25); ++ else ++ W_REG(clockcontrol_pci, type1_table[i].pci33); ++ ++ /* Reset */ ++ sb_watchdog(sbh, 1); ++ while (1); ++ } else if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4)) { ++ n4m_table_t *table = (pll_type == PLL_TYPE2) ? type2_table : type4_table; ++ uint tabsz = (pll_type == PLL_TYPE2) ? ARRAYSIZE(type2_table) : ARRAYSIZE(type4_table); ++ ++ ASSERT(cc); ++ ++ /* Store the current clock register values */ ++ orig_m2 = R_REG(&cc->clockcontrol_m2); ++ orig_mips = R_REG(&cc->clockcontrol_mips); ++ orig_ratio_parm = 0; ++ ++ /* Look up current ratio */ ++ for (i = 0; i < tabsz; i++) { ++ if ((orig_n == table[i].n) && ++ (orig_sb == table[i].sb) && ++ (orig_pci == table[i].pci33) && ++ (orig_m2 == table[i].m2) && ++ (orig_mips == table[i].m3)) { ++ orig_ratio_parm = table[i].ratio_parm; ++ break; ++ } ++ } ++ ++ /* Search for the closest MIPS clock greater or equal to a preferred value */ ++ for (i = 0; i < tabsz; i++) { ++ ASSERT(table[i].mipsclock == ++ sb_clock_rate(pll_type, table[i].n, table[i].m3)); ++ if ((mipsclock <= table[i].mipsclock) && ++ ((sbclock == 0) || (sbclock <= table[i].sbclock))) ++ break; ++ } ++ if (i == tabsz) { ++ ret = FALSE; ++ goto done; ++ } else { ++ ret = TRUE; ++ } ++ ++ /* No PLL change */ ++ if ((orig_n == table[i].n) && ++ (orig_sb == table[i].sb) && ++ (orig_pci == table[i].pci33) && ++ (orig_m2 == table[i].m2) && ++ (orig_mips == table[i].m3)) ++ goto done; ++ ++ /* Set the PLL controls */ ++ W_REG(clockcontrol_n, table[i].n); ++ W_REG(clockcontrol_sb, table[i].sb); ++ W_REG(clockcontrol_pci, table[i].pci33); ++ W_REG(&cc->clockcontrol_m2, table[i].m2); ++ W_REG(&cc->clockcontrol_mips, table[i].m3); ++ ++ /* No ratio change */ ++ if (orig_ratio_parm == table[i].ratio_parm) ++ goto end_fill; ++ ++ new_ratio = table[i].ratio_parm; ++ ++ icache_probe(&icache_size, &ic_lsize); ++ ++ /* Preload the code into the cache */ ++ start = ((ulong) &&start_fill) & ~(ic_lsize - 1); ++ end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1); ++ while (start < end) { ++ cache_unroll(start, Fill_I); ++ start += ic_lsize; ++ } ++ ++ /* Copy the handler */ ++ start = (ulong) &handler; ++ end = (ulong) &afterhandler; ++ dst = KSEG1ADDR(0x180); ++ for (i = 0; i < (end - start); i += 4) ++ *((ulong *)(dst + i)) = *((ulong *)(start + i)); ++ ++ /* Preload handler into the cache one line at a time */ ++ for (i = 0; i < (end - start); i += 4) ++ cache_unroll(dst + i, Fill_I); ++ ++ /* Clear BEV bit */ ++ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV); ++ ++ /* Enable interrupts */ ++ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE)); ++ ++ /* Enable MIPS timer interrupt */ ++ if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) && ++ !(mipsr = sb_setcore(sbh, SB_MIPS33, 0))) ++ ASSERT(mipsr); ++ W_REG(&mipsr->intmask, 1); ++ ++ start_fill: ++ /* step 1, set clock ratios */ ++ MTC0(C0_BROADCOM, 3, new_ratio); ++ MTC0(C0_BROADCOM, 1, 8); ++ ++ /* step 2: program timer intr */ ++ W_REG(&mipsr->timer, 100); ++ (void) R_REG(&mipsr->timer); ++ ++ /* step 3, switch to async */ ++ sync_mode = MFC0(C0_BROADCOM, 4); ++ MTC0(C0_BROADCOM, 4, 1 << 22); ++ ++ /* step 4, set cfg active */ ++ MTC0(C0_BROADCOM, 2, 0x9); ++ ++ ++ /* steps 5 & 6 */ ++ __asm__ __volatile__ ( ++ ".set\tmips3\n\t" ++ "wait\n\t" ++ ".set\tmips0" ++ ); ++ ++ /* step 7, clear cfg_active */ ++ MTC0(C0_BROADCOM, 2, 0); ++ ++ /* Additional Step: set back to orig sync mode */ ++ MTC0(C0_BROADCOM, 4, sync_mode); ++ ++ /* step 8, fake soft reset */ ++ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | 4); ++ ++ end_fill: ++ /* step 9 set watchdog timer */ ++ sb_watchdog(sbh, 20); ++ (void) R_REG(&cc->chipid); ++ ++ /* step 11 */ ++ __asm__ __volatile__ ( ++ ".set\tmips3\n\t" ++ "sync\n\t" ++ "wait\n\t" ++ ".set\tmips0" ++ ); ++ while (1); ++ } ++ ++done: ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); ++ ++ return ret; ++} ++ ++ ++/* returns the ncdl value to be programmed into sdram_ncdl for calibration */ ++uint32 ++sb_memc_get_ncdl(void *sbh) ++{ ++ sbmemcregs_t *memc; ++ uint32 ret = 0; ++ uint32 config, rd, wr, misc, dqsg, cd, sm, sd; ++ uint idx, rev; ++ ++ idx = sb_coreidx(sbh); ++ ++ memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0); ++ if (memc == 0) ++ goto out; ++ ++ rev = sb_corerev(sbh); ++ ++ config = R_REG(&memc->config); ++ wr = R_REG(&memc->wrncdlcor); ++ rd = R_REG(&memc->rdncdlcor); ++ misc = R_REG(&memc->miscdlyctl); ++ dqsg = R_REG(&memc->dqsgatencdl); ++ ++ rd &= MEMC_RDNCDLCOR_RD_MASK; ++ wr &= MEMC_WRNCDLCOR_WR_MASK; ++ dqsg &= MEMC_DQSGATENCDL_G_MASK; ++ ++ if (config & MEMC_CONFIG_DDR) { ++ ret = (wr << 16) | (rd << 8) | dqsg; ++ } else { ++ if (rev > 0) ++ cd = rd; ++ else ++ cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD); ++ sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT; ++ sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT; ++ ret = (sm << 16) | (sd << 8) | cd; ++ } ++ ++out: ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); ++ ++ return ret; ++} +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/sbpci.c linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/sbpci.c +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/sbpci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/sbpci.c 2005-08-28 11:12:20.479851704 +0200 +@@ -0,0 +1,530 @@ ++/* ++ * Low-Level PCI and SB support for BCM47xx ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include <typedefs.h> ++#include <pcicfg.h> ++#include <bcmdevs.h> ++#include <sbconfig.h> ++#include <sbpci.h> ++#include <osl.h> ++#include <bcmendian.h> ++#include <bcmutils.h> ++#include <sbutils.h> ++#include <bcmnvram.h> ++#include <hndmips.h> ++ ++/* Can free sbpci_init() memory after boot */ ++#ifndef linux ++#define __init ++#endif ++ ++/* Emulated configuration space */ ++static pci_config_regs sb_config_regs[SB_MAXCORES]; ++ ++/* Banned cores */ ++static uint16 pci_ban[32] = { 0 }; ++static uint pci_banned = 0; ++ ++/* CardBus mode */ ++static bool cardbus = FALSE; ++ ++/* ++ * Functions for accessing external PCI configuration space ++ */ ++ ++/* Assume one-hot slot wiring */ ++#define PCI_SLOT_MAX 16 ++ ++static uint32 ++config_cmd(void *sbh, uint bus, uint dev, uint func, uint off) ++{ ++ uint coreidx; ++ sbpciregs_t *regs; ++ uint32 addr = 0; ++ ++ /* CardBusMode supports only one device */ ++ if (cardbus && dev > 1) ++ return 0; ++ ++ coreidx = sb_coreidx(sbh); ++ regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0); ++ ++ /* Type 0 transaction */ ++ if (bus == 1) { ++ /* Skip unwired slots */ ++ if (dev < PCI_SLOT_MAX) { ++ /* Slide the PCI window to the appropriate slot */ ++ W_REG(®s->sbtopci1, SBTOPCI_CFG0 | ((1 << (dev + 16)) & SBTOPCI1_MASK)); ++ addr = SB_PCI_CFG | ((1 << (dev + 16)) & ~SBTOPCI1_MASK) | ++ (func << 8) | (off & ~3); ++ } ++ } ++ ++ /* Type 1 transaction */ ++ else { ++ W_REG(®s->sbtopci1, SBTOPCI_CFG1); ++ addr = SB_PCI_CFG | (bus << 16) | (dev << 11) | (func << 8) | (off & ~3); ++ } ++ ++ sb_setcoreidx(sbh, coreidx); ++ ++ return addr; ++} ++ ++static int ++extpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++{ ++ uint32 addr, *reg = NULL, val; ++ int ret = 0; ++ ++ if (!(addr = config_cmd(sbh, bus, dev, func, off)) || ++ !(reg = (uint32 *) REG_MAP(addr, len)) || ++ BUSPROBE(val, reg)) ++ val = 0xffffffff; ++ ++ val >>= 8 * (off & 3); ++ if (len == 4) ++ *((uint32 *) buf) = val; ++ else if (len == 2) ++ *((uint16 *) buf) = (uint16) val; ++ else if (len == 1) ++ *((uint8 *) buf) = (uint8) val; ++ else ++ ret = -1; ++ ++ if (reg) ++ REG_UNMAP(reg); ++ ++ return ret; ++} ++ ++static int ++extpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++{ ++ uint32 addr, *reg = NULL, val; ++ int ret = 0; ++ ++ if (!(addr = config_cmd(sbh, bus, dev, func, off)) || ++ !(reg = (uint32 *) REG_MAP(addr, len)) || ++ BUSPROBE(val, reg)) ++ goto done; ++ ++ if (len == 4) ++ val = *((uint32 *) buf); ++ else if (len == 2) { ++ val &= ~(0xffff << (8 * (off & 3))); ++ val |= *((uint16 *) buf) << (8 * (off & 3)); ++ } else if (len == 1) { ++ val &= ~(0xff << (8 * (off & 3))); ++ val |= *((uint8 *) buf) << (8 * (off & 3)); ++ } else ++ ret = -1; ++ ++ W_REG(reg, val); ++ ++ done: ++ if (reg) ++ REG_UNMAP(reg); ++ ++ return ret; ++} ++ ++/* ++ * Functions for accessing translated SB configuration space ++ */ ++ ++static int ++sb_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++{ ++ pci_config_regs *cfg; ++ ++ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs)) ++ return -1; ++ cfg = &sb_config_regs[dev]; ++ ++ ASSERT(ISALIGNED(off, len)); ++ ASSERT(ISALIGNED(buf, len)); ++ ++ if (len == 4) ++ *((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off))); ++ else if (len == 2) ++ *((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off))); ++ else if (len == 1) ++ *((uint8 *) buf) = *((uint8 *)((ulong) cfg + off)); ++ else ++ return -1; ++ ++ return 0; ++} ++ ++static int ++sb_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++{ ++ uint coreidx, n; ++ void *regs; ++ sbconfig_t *sb; ++ pci_config_regs *cfg; ++ ++ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs)) ++ return -1; ++ cfg = &sb_config_regs[dev]; ++ ++ ASSERT(ISALIGNED(off, len)); ++ ASSERT(ISALIGNED(buf, len)); ++ ++ /* Emulate BAR sizing */ ++ if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) && ++ len == 4 && *((uint32 *) buf) == ~0) { ++ coreidx = sb_coreidx(sbh); ++ if ((regs = sb_setcoreidx(sbh, dev))) { ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ /* Highest numbered address match register */ ++ n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT; ++ if (off == OFFSETOF(pci_config_regs, base[0])) ++ cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1); ++ /*else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1) ++ cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1); ++ else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2) ++ cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1); ++ else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3) ++ cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1);*/ ++ } ++ sb_setcoreidx(sbh, coreidx); ++ return 0; ++ } ++ ++ if (len == 4) ++ *((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf)); ++ else if (len == 2) ++ *((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf)); ++ else if (len == 1) ++ *((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf); ++ else ++ return -1; ++ ++ return 0; ++} ++ ++int ++sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++{ ++ if (bus == 0) ++ return sb_read_config(sbh, bus, dev, func, off, buf, len); ++ else ++ return extpci_read_config(sbh, bus, dev, func, off, buf, len); ++} ++ ++int ++sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++{ ++ if (bus == 0) ++ return sb_write_config(sbh, bus, dev, func, off, buf, len); ++ else ++ return extpci_write_config(sbh, bus, dev, func, off, buf, len); ++} ++ ++void ++sbpci_ban(uint16 core) ++{ ++ if (pci_banned < ARRAYSIZE(pci_ban)) ++ pci_ban[pci_banned++] = core; ++} ++ ++int __init ++sbpci_init(void *sbh) ++{ ++ uint chip, chiprev, chippkg, coreidx, host, i; ++ sbpciregs_t *pci; ++ sbconfig_t *sb; ++ pci_config_regs *cfg; ++ void *regs; ++ char varname[8]; ++ uint wlidx = 0; ++ uint16 vendor, core; ++ uint8 class, subclass, progif; ++ uint32 val; ++ uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK }; ++ uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT }; ++ ++ chip = sb_chip(sbh); ++ chiprev = sb_chiprev(sbh); ++ chippkg = sb_chippkg(sbh); ++ coreidx = sb_coreidx(sbh); ++ ++ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) ++ return -1; ++ sb_core_reset(sbh, 0); ++ ++ if (((chip == BCM4310_DEVICE_ID) && (chiprev == 0)) || ++ ((chip == BCM4712_DEVICE_ID) && (chippkg == BCM4712SMALL_PKG_ID))) ++ host = 0; ++ else ++ host = !BUSPROBE(val, &pci->control); ++ ++ if (!host) { ++ /* Disable PCI interrupts in client mode */ ++ sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF); ++ W_REG(&sb->sbintvec, 0); ++ ++ /* Disable the PCI bridge in client mode */ ++ sbpci_ban(SB_PCI); ++ printf("PCI: Disabled\n"); ++ } else { ++ /* Reset the external PCI bus and enable the clock */ ++ W_REG(&pci->control, 0x5); /* enable the tristate drivers */ ++ W_REG(&pci->control, 0xd); /* enable the PCI clock */ ++ OSL_DELAY(100); /* delay 100 us */ ++ W_REG(&pci->control, 0xf); /* deassert PCI reset */ ++ W_REG(&pci->arbcontrol, PCI_INT_ARB); /* use internal arbiter */ ++ OSL_DELAY(1); /* delay 1 us */ ++ ++ /* Enable CardBusMode */ ++ cardbus = nvram_match("cardbus", "1"); ++ if (cardbus) { ++ printf("PCI: Enabling CardBus\n"); ++ /* GPIO 1 resets the CardBus device on bcm94710ap */ ++ sb_gpioout(sbh, 1, 1); ++ sb_gpioouten(sbh, 1, 1); ++ W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400); ++ } ++ ++ /* 64 MB I/O access window */ ++ W_REG(&pci->sbtopci0, SBTOPCI_IO); ++ /* 64 MB configuration access window */ ++ W_REG(&pci->sbtopci1, SBTOPCI_CFG0); ++ /* 1 GB memory access window */ ++ W_REG(&pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA); ++ ++ /* Enable PCI bridge BAR0 prefetch and burst */ ++ val = 6; ++ sbpci_write_config(sbh, 1, 0, 0, PCI_CFG_CMD, &val, sizeof(val)); ++ ++ /* Enable PCI interrupts */ ++ W_REG(&pci->intmask, PCI_INTA); ++ } ++ ++ /* Scan the SB bus */ ++ bzero(sb_config_regs, sizeof(sb_config_regs)); ++ for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) { ++ cfg->vendor = 0xffff; ++ if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs))) ++ continue; ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ ++ /* Read ID register and parse vendor and core */ ++ val = R_REG(&sb->sbidhigh); ++ vendor = (val & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT; ++ core = (val & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT; ++ progif = 0; ++ ++ /* Check if this core is banned */ ++ for (i = 0; i < pci_banned; i++) ++ if (core == pci_ban[i]) ++ break; ++ if (i < pci_banned) ++ continue; ++ ++ /* Known vendor translations */ ++ switch (vendor) { ++ case SB_VEND_BCM: ++ vendor = VENDOR_BROADCOM; ++ break; ++ } ++ ++ /* Determine class based on known core codes */ ++ switch (core) { ++ case SB_ILINE20: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_ETHER; ++ core = BCM47XX_ILINE_ID; ++ break; ++ case SB_ILINE100: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_ETHER; ++ core = BCM4610_ILINE_ID; ++ break; ++ case SB_ENET: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_ETHER; ++ core = BCM47XX_ENET_ID; ++ break; ++ case SB_SDRAM: ++ case SB_MEMC: ++ class = PCI_CLASS_MEMORY; ++ subclass = PCI_MEMORY_RAM; ++ break; ++ case SB_PCI: ++ class = PCI_CLASS_BRIDGE; ++ subclass = PCI_BRIDGE_PCI; ++ //break; ++ case SB_MIPS: ++ case SB_MIPS33: ++ class = PCI_CLASS_CPU; ++ subclass = PCI_CPU_MIPS; ++ break; ++ case SB_CODEC: ++ class = PCI_CLASS_COMM; ++ subclass = PCI_COMM_MODEM; ++ core = BCM47XX_V90_ID; ++ break; ++ case SB_USB: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ progif = 0x10; /* OHCI */ ++ core = BCM47XX_USB_ID; ++ break; ++ case SB_USB11H: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ progif = 0x10; /* OHCI */ ++ core = BCM47XX_USBH_ID; ++ break; ++ case SB_USB11D: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ core = BCM47XX_USBD_ID; ++ break; ++ case SB_IPSEC: ++ class = PCI_CLASS_CRYPT; ++ subclass = PCI_CRYPT_NETWORK; ++ core = BCM47XX_IPSEC_ID; ++ break; ++ case SB_EXTIF: ++ case SB_CC: ++ class = PCI_CLASS_MEMORY; ++ subclass = PCI_MEMORY_FLASH; ++ break; ++ case SB_D11: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_OTHER; ++ /* Let an nvram variable override this */ ++ sprintf(varname, "wl%did", wlidx); ++ wlidx++; ++ if ((core = getintvar(NULL, varname)) == 0) { ++ if (chip == BCM4712_DEVICE_ID) { ++ if (chippkg == BCM4712SMALL_PKG_ID) ++ core = BCM4306_D11G_ID; ++ else ++ core = BCM4306_D11DUAL_ID; ++ } else { ++ /* 4310 */ ++ core = BCM4310_D11B_ID; ++ } ++ } ++ break; ++ ++ default: ++ class = subclass = progif = 0xff; ++ break; ++ } ++ ++ /* Supported translations */ ++ cfg->vendor = htol16(vendor); ++ cfg->device = htol16(core); ++ cfg->rev_id = chiprev; ++ cfg->prog_if = progif; ++ cfg->sub_class = subclass; ++ cfg->base_class = class; ++ cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0))); ++ cfg->base[1] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch1)))*/; ++ cfg->base[2] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch2)))*/; ++ cfg->base[3] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch3)))*/; ++ cfg->base[4] = 0; ++ cfg->base[5] = 0; ++ if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI) ++ cfg->header_type = PCI_HEADER_BRIDGE; ++ else ++ cfg->header_type = PCI_HEADER_NORMAL; ++ /* Save core interrupt flag */ ++ cfg->int_pin = R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK; ++ /* Default to MIPS shared interrupt 0 */ ++ cfg->int_line = 0; ++ /* MIPS sbipsflag maps core interrupt flags to interrupts 1 through 4 */ ++ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) || ++ (regs = sb_setcore(sbh, SB_MIPS33, 0))) { ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ val = R_REG(&sb->sbipsflag); ++ for (cfg->int_line = 1; cfg->int_line <= 4; cfg->int_line++) { ++ if (((val & sbips_int_mask[cfg->int_line]) >> sbips_int_shift[cfg->int_line]) == cfg->int_pin) ++ break; ++ } ++ if (cfg->int_line > 4) ++ cfg->int_line = 0; ++ } ++ /* Emulated core */ ++ *((uint32 *) &cfg->sprom_control) = 0xffffffff; ++ } ++ ++ sb_setcoreidx(sbh, coreidx); ++ return 0; ++} ++ ++void ++sbpci_check(void *sbh) ++{ ++ uint coreidx; ++ sbpciregs_t *pci; ++ uint32 sbtopci1; ++ uint32 buf[64], *ptr, i; ++ ulong pa; ++ volatile uint j; ++ ++ coreidx = sb_coreidx(sbh); ++ pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0); ++ ++ /* Clear the test array */ ++ pa = (ulong) DMA_MAP(NULL, buf, sizeof(buf), DMA_RX, NULL); ++ ptr = (uint32 *) OSL_UNCACHED(&buf[0]); ++ memset(ptr, 0, sizeof(buf)); ++ ++ /* Point PCI window 1 to memory */ ++ sbtopci1 = R_REG(&pci->sbtopci1); ++ W_REG(&pci->sbtopci1, SBTOPCI_MEM | (pa & SBTOPCI1_MASK)); ++ ++ /* Fill the test array via PCI window 1 */ ++ ptr = (uint32 *) REG_MAP(SB_PCI_CFG + (pa & ~SBTOPCI1_MASK), sizeof(buf)); ++ for (i = 0; i < ARRAYSIZE(buf); i++) { ++ for (j = 0; j < 2; j++); ++ W_REG(&ptr[i], i); ++ } ++ REG_UNMAP(ptr); ++ ++ /* Restore PCI window 1 */ ++ W_REG(&pci->sbtopci1, sbtopci1); ++ ++ /* Check the test array */ ++ DMA_UNMAP(NULL, pa, sizeof(buf), DMA_RX, NULL); ++ ptr = (uint32 *) OSL_UNCACHED(&buf[0]); ++ for (i = 0; i < ARRAYSIZE(buf); i++) { ++ if (ptr[i] != i) ++ break; ++ } ++ ++ /* Change the clock if the test fails */ ++ if (i < ARRAYSIZE(buf)) { ++ uint32 req, cur; ++ ++ cur = sb_clock(sbh); ++ printf("PCI: Test failed at %d MHz\n", (cur + 500000) / 1000000); ++ for (req = 104000000; req < 176000000; req += 4000000) { ++ printf("PCI: Resetting to %d MHz\n", (req + 500000) / 1000000); ++ /* This will only reset if the clocks are valid and have changed */ ++ sb_mips_setclock(sbh, req, 0, 0); ++ } ++ /* Should not reach here */ ++ ASSERT(0); ++ } ++ ++ sb_setcoreidx(sbh, coreidx); ++} +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/broadcom/sbutils.c linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/sbutils.c +--- linux-2.6.12.5/arch/mips/bcm47xx/broadcom/sbutils.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/broadcom/sbutils.c 2005-08-28 11:12:20.482851248 +0200 +@@ -0,0 +1,1895 @@ ++/* ++ * Misc utility routines for accessing chip-specific features ++ * of the SiliconBackplane-based Broadcom chips. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include <typedefs.h> ++#include <osl.h> ++#include <bcmutils.h> ++#include <bcmdevs.h> ++#include <sbconfig.h> ++#include <sbchipc.h> ++#include <sbpci.h> ++#include <pcicfg.h> ++#include <sbpcmcia.h> ++#include <sbextif.h> ++#include <sbutils.h> ++#include <bcmsrom.h> ++ ++/* debug/trace */ ++#define SB_ERROR(args) ++ ++typedef uint32 (*sb_intrsoff_t)(void *intr_arg); ++typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg); ++ ++/* misc sb info needed by some of the routines */ ++typedef struct sb_info { ++ uint chip; /* chip number */ ++ uint chiprev; /* chip revision */ ++ uint chippkg; /* chip package option */ ++ uint boardtype; /* board type */ ++ uint boardvendor; /* board vendor id */ ++ uint bus; /* what bus type we are going through */ ++ ++ void *osh; /* osl os handle */ ++ void *sdh; /* bcmsdh handle */ ++ ++ void *curmap; /* current regs va */ ++ void *regs[SB_MAXCORES]; /* other regs va */ ++ ++ uint curidx; /* current core index */ ++ uint dev_coreid; /* the core provides driver functions */ ++ uint pciidx; /* pci core index */ ++ uint pcirev; /* pci core rev */ ++ ++ uint pcmciaidx; /* pcmcia core index */ ++ uint pcmciarev; /* pcmcia core rev */ ++ bool memseg; /* flag to toggle MEM_SEG register */ ++ ++ uint ccrev; /* chipc core rev */ ++ ++ uint gpioidx; /* gpio control core index */ ++ uint gpioid; /* gpio control coretype */ ++ ++ uint numcores; /* # discovered cores */ ++ uint coreid[SB_MAXCORES]; /* id of each core */ ++ ++ void *intr_arg; /* interrupt callback function arg */ ++ sb_intrsoff_t intrsoff_fn; /* function turns chip interrupts off */ ++ sb_intrsrestore_t intrsrestore_fn; /* function restore chip interrupts */ ++} sb_info_t; ++ ++/* local prototypes */ ++static void* sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz); ++static void sb_scan(sb_info_t *si); ++static uint sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val); ++static uint _sb_coreidx(void *sbh); ++static uint sb_findcoreidx(void *sbh, uint coreid, uint coreunit); ++static uint sb_pcidev2chip(uint pcidev); ++static uint sb_chip2numcores(uint chip); ++ ++#define SB_INFO(sbh) (sb_info_t*)sbh ++#define SET_SBREG(sbh, r, mask, val) W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val))) ++#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) \ ++ && ISALIGNED((x), SB_CORE_SIZE)) ++#define GOODREGS(regs) (regs && ISALIGNED(regs, SB_CORE_SIZE)) ++#define REGS2SB(va) (sbconfig_t*) ((uint)(va) + SBCONFIGOFF) ++#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES) ++#define BADIDX (SB_MAXCORES+1) ++ ++#define R_SBREG(sbh, sbr) sb_read_sbreg((sbh), (sbr)) ++#define W_SBREG(sbh, sbr, v) sb_write_sbreg((sbh), (sbr), (v)) ++#define AND_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v))) ++#define OR_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v))) ++ ++/* ++ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/ ++ * after core switching to avoid invalid register accesss inside ISR. ++ */ ++#define INTR_OFF(si, intr_val) \ ++ if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \ ++ intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); } ++#define INTR_RESTORE(si, intr_val) \ ++ if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \ ++ (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); } ++ ++/* power control defines */ ++#define PLL_DELAY 150 /* 150us pll on delay */ ++#define FREF_DELAY 15 /* 15us fref change delay */ ++#define LPOMINFREQ 25000 /* low power oscillator min */ ++#define LPOMAXFREQ 43000 /* low power oscillator max */ ++#define XTALMINFREQ 19800000 /* 20mhz - 1% */ ++#define XTALMAXFREQ 20200000 /* 20mhz + 1% */ ++#define PCIMINFREQ 25000000 /* 25mhz */ ++#define PCIMAXFREQ 34000000 /* 33mhz + fudge */ ++ ++#define SCC_LOW2FAST_LIMIT 5000 /* turn on fast clock time, in unit of ms */ ++ ++ ++static uint32 ++sb_read_sbreg(void *sbh, volatile uint32 *sbr) ++{ ++ sb_info_t *si; ++ uint8 tmp; ++ uint32 val, intr_val = 0; ++ ++ si = SB_INFO(sbh); ++ ++ /* ++ * compact flash only has 11 bits address, while we needs 12 bits address. ++ * MEM_SEG will be OR'd with other 11 bits address in hardware, ++ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). ++ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special ++ */ ++ if(si->memseg) { ++ INTR_OFF(si, intr_val); ++ tmp = 1; ++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); ++ (uint32)sbr &= ~(1 << 11); /* mask out bit 11*/ ++ } ++ ++ val = R_REG(sbr); ++ ++ if(si->memseg) { ++ tmp = 0; ++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); ++ INTR_RESTORE(si, intr_val); ++ } ++ ++ return (val); ++} ++ ++static void ++sb_write_sbreg(void *sbh, volatile uint32 *sbr, uint32 v) ++{ ++ sb_info_t *si; ++ uint8 tmp; ++ volatile uint32 dummy; ++ uint32 intr_val = 0; ++ ++ si = SB_INFO(sbh); ++ ++ /* ++ * compact flash only has 11 bits address, while we needs 12 bits address. ++ * MEM_SEG will be OR'd with other 11 bits address in hardware, ++ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). ++ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special ++ */ ++ if(si->memseg) { ++ INTR_OFF(si, intr_val); ++ tmp = 1; ++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); ++ (uint32)sbr &= ~(1 << 11); /* mask out bit 11 */ ++ } ++ ++ if ((si->bus == PCMCIA_BUS) || (si->bus == PCI_BUS)) { ++#ifdef IL_BIGENDIAN ++ dummy = R_REG(sbr); ++ W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff)); ++ dummy = R_REG(sbr); ++ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff)); ++#else ++ dummy = R_REG(sbr); ++ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff)); ++ dummy = R_REG(sbr); ++ W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff)); ++#endif ++ } else ++ W_REG(sbr, v); ++ ++ if(si->memseg) { ++ tmp = 0; ++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); ++ INTR_RESTORE(si, intr_val); ++ } ++} ++ ++/* ++ * Allocate a sb handle. ++ * devid - pci device id (used to determine chip#) ++ * osh - opaque OS handle ++ * regs - virtual address of initial core registers ++ * bustype - pci/pcmcia/sb/sdio/etc ++ * vars - pointer to a pointer area for "environment" variables ++ * varsz - pointer to int to return the size of the vars ++ */ ++void* ++sb_attach(uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz) ++{ ++ sb_info_t *si; ++ ++ /* alloc sb_info_t */ ++ if ((si = MALLOC(sizeof (sb_info_t))) == NULL) { ++ SB_ERROR(("sb_attach: malloc failed!\n")); ++ return (NULL); ++ } ++ ++ return (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, varsz)); ++} ++ ++/* global kernel resource */ ++static sb_info_t ksi; ++ ++/* generic kernel variant of sb_attach() */ ++void* ++sb_kattach() ++{ ++ uint32 *regs; ++ char *unused; ++ int varsz; ++ ++ if (ksi.curmap == NULL) { ++ uint32 cid; ++ regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE); ++ cid = R_REG((uint32 *)regs); ++ if ((cid == 0x08104712) || (cid == 0x08114712)) { ++ uint32 *scc, val; ++ ++ scc = (uint32 *)((uint32)regs + OFFSETOF(chipcregs_t, slow_clk_ctl)); ++ val = R_REG(scc); ++ SB_ERROR((" initial scc = 0x%x\n", val)); ++ val |= SCC_SS_XTAL; ++ W_REG(scc, val); ++ } ++ ++ sb_doattach(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs, ++ SB_BUS, NULL, &unused, &varsz); ++ } ++ ++ return &ksi; ++} ++ ++static void* ++sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz) ++{ ++ uint origidx; ++ chipcregs_t *cc; ++ uint32 w; ++ ++ ASSERT(GOODREGS(regs)); ++ ++ bzero((uchar*)si, sizeof (sb_info_t)); ++ ++ si->pciidx = si->gpioidx = BADIDX; ++ ++ si->osh = osh; ++ si->curmap = regs; ++ si->sdh = sdh; ++ ++ /* 4317A0 PCMCIA is no longer supported */ ++ if ((bustype == PCMCIA_BUS) && (R_REG((uint32 *)regs) == 0x04104317)) ++ return NULL; ++ ++ /* check to see if we are a sb core mimic'ing a pci core */ ++ if (bustype == PCI_BUS) { ++ if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff) ++ bustype = SB_BUS; ++ else ++ bustype = PCI_BUS; ++ } ++ ++ si->bus = bustype; ++ ++ /* kludge to enable the clock on the 4306 which lacks a slowclock */ ++ if (si->bus == PCI_BUS) ++ sb_pwrctl_xtal((void*)si, XTAL|PLL, ON); ++ ++ /* clear any previous epidiag-induced target abort */ ++ sb_taclear((void*)si); ++ ++ /* initialize current core index value */ ++ si->curidx = _sb_coreidx((void*)si); ++ ++ /* keep and reuse the initial register mapping */ ++ origidx = si->curidx; ++ if (si->bus == SB_BUS) ++ si->regs[origidx] = regs; ++ ++ /* initialize the vars */ ++ if (srom_var_init(si->bus, si->curmap, osh, vars, varsz)) { ++ SB_ERROR(("sb_attach: srom_var_init failed\n")); ++ goto bad; ++ } ++ ++ if (si->bus == PCMCIA_BUS) { ++ w = getintvar(*vars, "regwindowsz"); ++ si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE; ++ } ++ ++ /* is core-0 a chipcommon core? */ ++ si->numcores = 1; ++ cc = (chipcregs_t*) sb_setcoreidx((void*)si, 0); ++ if (sb_coreid((void*)si) != SB_CC) ++ cc = NULL; ++ ++ /* determine chip id and rev */ ++ if (cc) { ++ /* chip common core found! */ ++ si->chip = R_REG(&cc->chipid) & CID_ID_MASK; ++ si->chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT; ++ si->chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT; ++ } else { ++ /* without chip common core, get devid for PCMCIA */ ++ if (si->bus == PCMCIA_BUS) ++ devid = getintvar(*vars, "devid"); ++ ++ /* no chip common core -- must convert device id to chip id */ ++ if ((si->chip = sb_pcidev2chip(devid)) == 0) { ++ SB_ERROR(("sb_attach: unrecognized device id 0x%04x\n", devid)); ++ goto bad; ++ } ++ ++ /* ++ * The chip revision number is hardwired into all ++ * of the pci function config rev fields and is ++ * independent from the individual core revision numbers. ++ * For example, the "A0" silicon of each chip is chip rev 0. ++ * For PCMCIA we get it from the CIS instead. ++ */ ++ if (si->bus == PCMCIA_BUS) { ++ ASSERT(vars); ++ si->chiprev = getintvar(*vars, "chiprev"); ++ } else if (si->bus == PCI_BUS) { ++ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32)); ++ si->chiprev = w & 0xff; ++ } else ++ si->chiprev = 0; ++ } ++ ++ /* get chipcommon rev */ ++ si->ccrev = cc? sb_corerev((void*)si) : 0; ++ ++ /* determine numcores */ ++ if ((si->ccrev == 4) || (si->ccrev >= 6)) ++ si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT; ++ else ++ si->numcores = sb_chip2numcores(si->chip); ++ ++ /* return to original core */ ++ sb_setcoreidx((void*)si, origidx); ++ ++ /* sanity checks */ ++ ASSERT(si->chip); ++ /* 4704A1 is chiprev 8 :-( */ ++ ASSERT((si->chiprev < 8) || ++ ((si->chip == BCM4704_DEVICE_ID) && ((si->chiprev == 8)))); ++ ++ /* scan for cores */ ++ sb_scan(si); ++ ++ /* pci core is required */ ++ if (!GOODIDX(si->pciidx)) { ++ SB_ERROR(("sb_attach: pci core not found\n")); ++ goto bad; ++ } ++ ++ /* gpio control core is required */ ++ if (!GOODIDX(si->gpioidx)) { ++ SB_ERROR(("sb_attach: gpio control core not found\n")); ++ goto bad; ++ } ++ ++ /* get boardtype and boardrev */ ++ switch (si->bus) { ++ case PCI_BUS: ++ /* do a pci config read to get subsystem id and subvendor id */ ++ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32)); ++ si->boardvendor = w & 0xffff; ++ si->boardtype = (w >> 16) & 0xffff; ++ break; ++ ++ case PCMCIA_BUS: ++ case SDIO_BUS: ++ si->boardvendor = getintvar(*vars, "manfid"); ++ si->boardtype = getintvar(*vars, "prodid"); ++ break; ++ ++ case SB_BUS: ++ si->boardvendor = VENDOR_BROADCOM; ++ si->boardtype = 0xffff; ++ break; ++ } ++ ++ if (si->boardtype == 0) { ++ SB_ERROR(("sb_attach: unknown board type\n")); ++ ASSERT(si->boardtype); ++ } ++ ++ return ((void*)si); ++ ++bad: ++ MFREE(si, sizeof (sb_info_t)); ++ return (NULL); ++} ++ ++uint ++sb_coreid(void *sbh) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ ++ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT); ++} ++ ++uint ++sb_coreidx(void *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->curidx); ++} ++ ++/* return current index of core */ ++static uint ++_sb_coreidx(void *sbh) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ uint32 sbaddr = 0; ++ ++ si = SB_INFO(sbh); ++ ASSERT(si); ++ ++ switch (si->bus) { ++ case SB_BUS: ++ sb = REGS2SB(si->curmap); ++ sbaddr = sb_base(R_SBREG(sbh, &sb->sbadmatch0)); ++ break; ++ ++ case PCI_BUS: ++ sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32)); ++ break; ++ ++ case PCMCIA_BUS: { ++ uint8 tmp; ++ ++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1); ++ sbaddr = (uint)tmp << 12; ++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1); ++ sbaddr |= (uint)tmp << 16; ++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1); ++ sbaddr |= (uint)tmp << 24; ++ break; ++ } ++ default: ++ ASSERT(0); ++ } ++ ++ ASSERT(GOODCOREADDR(sbaddr)); ++ return ((sbaddr - SB_ENUM_BASE)/SB_CORE_SIZE); ++} ++ ++uint ++sb_corevendor(void *sbh) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ ++ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT); ++} ++ ++uint ++sb_corerev(void *sbh) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ ++ return (R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_RC_MASK); ++} ++ ++#define SBTML_ALLOW (SBTML_PE | SBTML_FGC | SBTML_FL_MASK) ++ ++/* set/clear sbtmstatelow core-specific flags */ ++uint32 ++sb_coreflags(void *sbh, uint32 mask, uint32 val) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ uint32 w; ++ ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ ++ ASSERT((val & ~mask) == 0); ++ ASSERT((mask & ~SBTML_ALLOW) == 0); ++ ++ /* mask and set */ ++ if (mask || val) { ++ w = (R_SBREG(sbh, &sb->sbtmstatelow) & ~mask) | val; ++ W_SBREG(sbh, &sb->sbtmstatelow, w); ++ } ++ ++ /* return the new value */ ++ return (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_ALLOW); ++} ++ ++/* set/clear sbtmstatehigh core-specific flags */ ++uint32 ++sb_coreflagshi(void *sbh, uint32 mask, uint32 val) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ uint32 w; ++ ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ ++ ASSERT((val & ~mask) == 0); ++ ASSERT((mask & ~SBTMH_FL_MASK) == 0); ++ ++ /* mask and set */ ++ if (mask || val) { ++ w = (R_SBREG(sbh, &sb->sbtmstatehigh) & ~mask) | val; ++ W_SBREG(sbh, &sb->sbtmstatehigh, w); ++ } ++ ++ /* return the new value */ ++ return (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_FL_MASK); ++} ++ ++bool ++sb_iscoreup(void *sbh) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ ++ return ((R_SBREG(sbh, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ | SBTML_CLK)) == SBTML_CLK); ++} ++ ++/* ++ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation, ++ * switch back to the original core, and return the new value. ++ */ ++static uint ++sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val) ++{ ++ sb_info_t *si; ++ uint origidx; ++ uint32 *r; ++ uint w; ++ uint intr_val = 0; ++ ++ ASSERT(GOODIDX(coreidx)); ++ ASSERT(regoff < SB_CORE_SIZE); ++ ASSERT((val & ~mask) == 0); ++ ++ si = SB_INFO(sbh); ++ ++ /* save current core index */ ++ origidx = sb_coreidx(sbh); ++ ++ /* switch core */ ++ INTR_OFF(si, intr_val); ++ r = (uint32*) ((uint) sb_setcoreidx(sbh, coreidx) + regoff); ++ ++ /* mask and set */ ++ if (mask || val) { ++ if (regoff >= SBCONFIGOFF) { ++ w = (R_SBREG(sbh, r) & ~mask) | val; ++ W_SBREG(sbh, r, w); ++ } else { ++ w = (R_REG(r) & ~mask) | val; ++ W_REG(r, w); ++ } ++ } ++ ++ /* readback */ ++ w = R_SBREG(sbh, r); ++ ++ /* restore core index */ ++ if (origidx != coreidx) ++ sb_setcoreidx(sbh, origidx); ++ ++ INTR_RESTORE(si, intr_val); ++ return (w); ++} ++ ++/* scan the sb enumerated space to identify all cores */ ++static void ++sb_scan(sb_info_t *si) ++{ ++ void *sbh; ++ uint origidx; ++ uint i; ++ ++ sbh = (void*) si; ++ ++ /* numcores should already be set */ ++ ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES)); ++ ++ /* save current core index */ ++ origidx = sb_coreidx(sbh); ++ ++ si->pciidx = si->gpioidx = BADIDX; ++ ++ for (i = 0; i < si->numcores; i++) { ++ sb_setcoreidx(sbh, i); ++ si->coreid[i] = sb_coreid(sbh); ++ ++ if (si->coreid[i] == SB_CC) ++ si->ccrev = sb_corerev(sbh); ++ ++ else if (si->coreid[i] == SB_PCI) { ++ si->pciidx = i; ++ si->pcirev = sb_corerev(sbh); ++ ++ }else if (si->coreid[i] == SB_PCMCIA){ ++ si->pcmciaidx = i; ++ si->pcmciarev = sb_corerev(sbh); ++ } ++ } ++ ++ /* ++ * Find the gpio "controlling core" type and index. ++ * Precedence: ++ * - if there's a chip common core - use that ++ * - else if there's a pci core (rev >= 2) - use that ++ * - else there had better be an extif core (4710 only) ++ */ ++ if (GOODIDX(sb_findcoreidx(sbh, SB_CC, 0))) { ++ si->gpioidx = sb_findcoreidx(sbh, SB_CC, 0); ++ si->gpioid = SB_CC; ++ } else if (GOODIDX(si->pciidx) && (si->pcirev >= 2)) { ++ si->gpioidx = si->pciidx; ++ si->gpioid = SB_PCI; ++ } else if (sb_findcoreidx(sbh, SB_EXTIF, 0)) { ++ si->gpioidx = sb_findcoreidx(sbh, SB_EXTIF, 0); ++ si->gpioid = SB_EXTIF; ++ } ++ ++ /* return to original core index */ ++ sb_setcoreidx(sbh, origidx); ++} ++ ++/* may be called with core in reset */ ++void ++sb_detach(void *sbh) ++{ ++ sb_info_t *si; ++ uint idx; ++ ++ si = SB_INFO(sbh); ++ ++ if (si == NULL) ++ return; ++ ++ if (si->bus == SB_BUS) ++ for (idx = 0; idx < SB_MAXCORES; idx++) ++ if (si->regs[idx]) { ++ REG_UNMAP(si->regs[idx]); ++ si->regs[idx] = NULL; ++ } ++ ++ MFREE(si, sizeof (sb_info_t)); ++} ++ ++/* use pci dev id to determine chip id for chips not having a chipcommon core */ ++static uint ++sb_pcidev2chip(uint pcidev) ++{ ++ if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID)) ++ return (BCM4710_DEVICE_ID); ++ if ((pcidev >= BCM4610_DEVICE_ID) && (pcidev <= BCM4610_USB_ID)) ++ return (BCM4610_DEVICE_ID); ++ if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID)) ++ return (BCM4402_DEVICE_ID); ++ if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID)) ++ return (BCM4307_DEVICE_ID); ++ if (pcidev == BCM4301_DEVICE_ID) ++ return (BCM4301_DEVICE_ID); ++ ++ return (0); ++} ++ ++/* convert chip number to number of i/o cores */ ++static uint ++sb_chip2numcores(uint chip) ++{ ++ if (chip == 0x4710) ++ return (9); ++ if (chip == 0x4610) ++ return (9); ++ if (chip == 0x4402) ++ return (3); ++ if ((chip == 0x4307) || (chip == 0x4301)) ++ return (5); ++ if (chip == 0x4310) ++ return (8); ++ if (chip == 0x4306) /* < 4306c0 */ ++ return (6); ++ if (chip == 0x4704) ++ return (9); ++ if (chip == 0x5365) ++ return (7); ++ ++ SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip)); ++ ASSERT(0); ++ return (1); ++} ++ ++/* return index of coreid or BADIDX if not found */ ++static uint ++sb_findcoreidx(void *sbh, uint coreid, uint coreunit) ++{ ++ sb_info_t *si; ++ uint found; ++ uint i; ++ ++ si = SB_INFO(sbh); ++ found = 0; ++ ++ for (i = 0; i < si->numcores; i++) ++ if (si->coreid[i] == coreid) { ++ if (found == coreunit) ++ return (i); ++ found++; ++ } ++ ++ return (BADIDX); ++} ++ ++/* change logical "focus" to the indiciated core */ ++void* ++sb_setcoreidx(void *sbh, uint coreidx) ++{ ++ sb_info_t *si; ++ uint32 sbaddr; ++ uint8 tmp; ++ ++ si = SB_INFO(sbh); ++ ++ if (coreidx >= si->numcores) ++ return (NULL); ++ ++ /* ++ * If the user has provided an interrupt mask enabled function, ++ * then assert interrupts are disabled before switching the core. ++ */ ++ ASSERT((si->imf == NULL) || !(*si->imf)(si->imfarg)); ++ ++ sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE); ++ ++ switch (si->bus) { ++ case SB_BUS: ++ /* map new one */ ++ if (!si->regs[coreidx]) { ++ si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE); ++ ASSERT(GOODREGS(si->regs[coreidx])); ++ } ++ si->curmap = si->regs[coreidx]; ++ break; ++ ++ case PCI_BUS: ++ /* point bar0 window */ ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr); ++ break; ++ ++ case PCMCIA_BUS: ++ tmp = (sbaddr >> 12) & 0x0f; ++ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1); ++ tmp = (sbaddr >> 16) & 0xff; ++ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1); ++ tmp = (sbaddr >> 24) & 0xff; ++ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1); ++ break; ++ } ++ ++ si->curidx = coreidx; ++ ++ return (si->curmap); ++} ++ ++/* change logical "focus" to the indicated core */ ++void* ++sb_setcore(void *sbh, uint coreid, uint coreunit) ++{ ++ sb_info_t *si; ++ uint idx; ++ ++ si = SB_INFO(sbh); ++ ++ idx = sb_findcoreidx(sbh, coreid, coreunit); ++ if (!GOODIDX(idx)) ++ return (NULL); ++ ++ return (sb_setcoreidx(sbh, idx)); ++} ++ ++/* return chip number */ ++uint ++sb_chip(void *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->chip); ++} ++ ++/* return chip revision number */ ++uint ++sb_chiprev(void *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->chiprev); ++} ++ ++/* return chip package option */ ++uint ++sb_chippkg(void *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->chippkg); ++} ++ ++/* return board vendor id */ ++uint ++sb_boardvendor(void *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->boardvendor); ++} ++ ++/* return boardtype */ ++uint ++sb_boardtype(void *sbh) ++{ ++ sb_info_t *si; ++ char *var; ++ ++ si = SB_INFO(sbh); ++ ++ if (si->bus == SB_BUS && si->boardtype == 0xffff) { ++ /* boardtype format is a hex string */ ++ si->boardtype = getintvar(NULL, "boardtype"); ++ ++ /* backward compatibility for older boardtype string format */ ++ if ((si->boardtype == 0) && (var = getvar(NULL, "boardtype"))) { ++ if (!strcmp(var, "bcm94710dev")) ++ si->boardtype = BCM94710D_BOARD; ++ else if (!strcmp(var, "bcm94710ap")) ++ si->boardtype = BCM94710AP_BOARD; ++ else if (!strcmp(var, "bcm94310u")) ++ si->boardtype = BCM94310U_BOARD; ++ else if (!strcmp(var, "bu4711")) ++ si->boardtype = BU4711_BOARD; ++ else if (!strcmp(var, "bu4710")) ++ si->boardtype = BU4710_BOARD; ++ else if (!strcmp(var, "bcm94702mn")) ++ si->boardtype = BCM94702MN_BOARD; ++ else if (!strcmp(var, "bcm94710r1")) ++ si->boardtype = BCM94710R1_BOARD; ++ else if (!strcmp(var, "bcm94710r4")) ++ si->boardtype = BCM94710R4_BOARD; ++ else if (!strcmp(var, "bcm94702cpci")) ++ si->boardtype = BCM94702CPCI_BOARD; ++ else if (!strcmp(var, "bcm95380_rr")) ++ si->boardtype = BCM95380RR_BOARD; ++ } ++ } ++ ++ return (si->boardtype); ++} ++ ++/* return board bus style */ ++uint ++sb_boardstyle(void *sbh) ++{ ++ sb_info_t *si; ++ uint16 w; ++ ++ si = SB_INFO(sbh); ++ ++ if (si->bus == PCMCIA_BUS) ++ return (BOARDSTYLE_PCMCIA); ++ ++ if (si->bus == SB_BUS) ++ return (BOARDSTYLE_SOC); ++ ++ /* bus is PCI */ ++ ++ if (OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CIS, sizeof (uint32)) != 0) ++ return (BOARDSTYLE_CARDBUS); ++ ++ if ((srom_read(si->bus, si->curmap, si->osh, (SPROM_SIZE - 1) * 2, 2, &w) == 0) && ++ (w == 0x0313)) ++ return (BOARDSTYLE_CARDBUS); ++ ++ return (BOARDSTYLE_PCI); ++} ++ ++/* return boolean if sbh device is in pci hostmode or client mode */ ++uint ++sb_bus(void *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->bus); ++} ++ ++/* return list of found cores */ ++uint ++sb_corelist(void *sbh, uint coreid[]) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ ++ bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof (uint))); ++ return (si->numcores); ++} ++ ++/* return current register mapping */ ++void * ++sb_coreregs(void *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ ASSERT(GOODREGS(si->curmap)); ++ ++ return (si->curmap); ++} ++ ++/* Check if a target abort has happened and clear it */ ++bool ++sb_taclear(void *sbh) ++{ ++ sb_info_t *si; ++ bool rc = FALSE; ++ sbconfig_t *sb; ++ ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ ++ if (si->bus == PCI_BUS) { ++ uint32 stcmd; ++ ++ stcmd = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CMD, sizeof(stcmd)); ++ rc = (stcmd & 0x08000000) != 0; ++ ++ if (rc) { ++ /* Target abort bit is set, clear it */ ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_CFG_CMD, sizeof(stcmd), stcmd); ++ } ++ } else if (si->bus == PCMCIA_BUS) { ++ rc = FALSE; ++ } ++ else if (si->bus == SDIO_BUS) { ++ /* due to 4317 A0 HW bug, sdio core wedged on target abort, ++ just clear SBSErr bit blindly */ ++ if (0x0 != R_SBREG(sbh, &sb->sbtmerrlog)) { ++ SB_ERROR(("SDIO target abort, clean it")); ++ W_SBREG(sbh, &sb->sbtmstatehigh, 0); ++ } ++ rc = FALSE; ++ } ++ ++ return (rc); ++} ++ ++/* do buffered registers update */ ++void ++sb_commit(void *sbh) ++{ ++ sb_info_t *si; ++ sbpciregs_t *pciregs; ++ uint origidx; ++ uint intr_val = 0; ++ ++ si = SB_INFO(sbh); ++ ++ origidx = si->curidx; ++ ASSERT(GOODIDX(origidx)); ++ ++ INTR_OFF(si, intr_val); ++ /* switch over to pci core */ ++ pciregs = (sbpciregs_t*) sb_setcore(sbh, SB_PCI, 0); ++ ++ /* do the buffer registers update */ ++ W_REG(&pciregs->bcastaddr, SB_COMMIT); ++ W_REG(&pciregs->bcastdata, 0x0); ++ ++ /* restore core index */ ++ sb_setcoreidx(sbh, origidx); ++ INTR_RESTORE(si, intr_val); ++} ++ ++/* reset and re-enable a core */ ++void ++sb_core_reset(void *sbh, uint32 bits) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ volatile uint32 dummy; ++ ++ si = SB_INFO(sbh); ++ ASSERT(GOODREGS(si->curmap)); ++ sb = REGS2SB(si->curmap); ++ ++ /* ++ * Must do the disable sequence first to work for arbitrary current core state. ++ */ ++ sb_core_disable(sbh, bits); ++ ++ /* ++ * Now do the initialization sequence. ++ */ ++ ++ /* set reset while enabling the clock and forcing them on throughout the core */ ++ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits)); ++ dummy = R_SBREG(sbh, &sb->sbtmstatelow); ++ ++ if (sb_coreid(sbh) == SB_ILINE100) { ++ bcm_mdelay(50); ++ } else { ++ OSL_DELAY(1); ++ } ++ ++ if (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_SERR) { ++ W_SBREG(sbh, &sb->sbtmstatehigh, 0); ++ } ++ if ((dummy = R_SBREG(sbh, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) { ++ AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO)); ++ } ++ ++ /* clear reset and allow it to propagate throughout the core */ ++ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits)); ++ dummy = R_SBREG(sbh, &sb->sbtmstatelow); ++ OSL_DELAY(1); ++ ++ /* leave clock enabled */ ++ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | bits)); ++ dummy = R_SBREG(sbh, &sb->sbtmstatelow); ++ OSL_DELAY(1); ++} ++ ++void ++sb_core_tofixup(void *sbh) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ ++ si = SB_INFO(sbh); ++ ++ if (si->pcirev >= 5) ++ return; ++ ++ ASSERT(GOODREGS(si->curmap)); ++ sb = REGS2SB(si->curmap); ++ ++ if (si->bus == SB_BUS) { ++ SET_SBREG(sbh, &sb->sbimconfiglow, ++ SBIMCL_RTO_MASK | SBIMCL_STO_MASK, ++ (0x5 << SBIMCL_RTO_SHIFT) | 0x3); ++ } else { ++ if (sb_coreid(sbh) == SB_PCI) { ++ SET_SBREG(sbh, &sb->sbimconfiglow, ++ SBIMCL_RTO_MASK | SBIMCL_STO_MASK, ++ (0x3 << SBIMCL_RTO_SHIFT) | 0x2); ++ } else { ++ SET_SBREG(sbh, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0); ++ } ++ } ++ ++ sb_commit(sbh); ++} ++ ++void ++sb_core_disable(void *sbh, uint32 bits) ++{ ++ sb_info_t *si; ++ volatile uint32 dummy; ++ sbconfig_t *sb; ++ ++ si = SB_INFO(sbh); ++ ++ ASSERT(GOODREGS(si->curmap)); ++ sb = REGS2SB(si->curmap); ++ ++ /* must return if core is already in reset */ ++ if (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_RESET) ++ return; ++ ++ /* put into reset and return if clocks are not enabled */ ++ if ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_CLK) == 0) ++ goto disable; ++ ++ /* set the reject bit */ ++ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | SBTML_REJ)); ++ ++ /* spin until reject is set */ ++ while ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_REJ) == 0) ++ OSL_DELAY(1); ++ ++ /* spin until sbtmstatehigh.busy is clear */ ++ while (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_BUSY) ++ OSL_DELAY(1); ++ ++ /* set reset and reject while enabling the clocks */ ++ W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | SBTML_REJ | SBTML_RESET)); ++ dummy = R_SBREG(sbh, &sb->sbtmstatelow); ++ OSL_DELAY(10); ++ ++ disable: ++ /* leave reset and reject asserted */ ++ W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_REJ | SBTML_RESET)); ++ OSL_DELAY(1); ++} ++ ++void ++sb_watchdog(void *sbh, uint ticks) ++{ ++ sb_info_t *si = SB_INFO(sbh); ++ ++ /* instant NMI */ ++ switch (si->gpioid) { ++ case SB_CC: ++ sb_corereg(sbh, si->gpioidx, OFFSETOF(chipcregs_t, watchdog), ~0, ticks); ++ break; ++ case SB_EXTIF: ++ sb_corereg(sbh, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks); ++ break; ++ } ++} ++ ++/* initialize the pcmcia core */ ++void ++sb_pcmcia_init(void *sbh) ++{ ++ sb_info_t *si; ++ uint8 cor; ++ ++ si = SB_INFO(sbh); ++ ++ /* enable d11 mac interrupts */ ++ if (si->chip == BCM4301_DEVICE_ID) { ++ /* Have to use FCR2 in 4301 */ ++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1); ++ cor |= COR_IRQEN | COR_FUNEN; ++ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1); ++ } else { ++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); ++ cor |= COR_IRQEN | COR_FUNEN; ++ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); ++ } ++ ++} ++ ++ ++/* ++ * Configure the pci core for pci client (NIC) action ++ * and get appropriate dma offset value. ++ * coremask is the bitvec of cores by index to be enabled. ++ */ ++void ++sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ sbpciregs_t *pciregs; ++ uint32 sbflag; ++ uint32 w; ++ uint idx; ++ ++ si = SB_INFO(sbh); ++ ++ if (dmaoffset) ++ *dmaoffset = 0; ++ ++ /* if not pci bus, we're done */ ++ if (si->bus != PCI_BUS) ++ return; ++ ++ ASSERT(si->pciidx); ++ ++ /* get current core index */ ++ idx = si->curidx; ++ ++ /* we interrupt on this backplane flag number */ ++ ASSERT(GOODREGS(si->curmap)); ++ sb = REGS2SB(si->curmap); ++ sbflag = R_SBREG(sbh, &sb->sbtpsflag) & SBTPS_NUM0_MASK; ++ ++ /* switch over to pci core */ ++ pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->pciidx); ++ sb = REGS2SB(pciregs); ++ ++ /* ++ * Enable sb->pci interrupts. Assume ++ * PCI rev 2.3 support was added in pci core rev 6 and things changed.. ++ */ ++ if (si->pcirev < 6) { ++ /* set sbintvec bit for our flag number */ ++ OR_SBREG(sbh, &sb->sbintvec, (1 << sbflag)); ++ } else { ++ /* pci config write to set this core bit in PCIIntMask */ ++ w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32)); ++ w |= (coremask << PCI_SBIM_SHIFT); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w); ++ } ++ ++ /* enable prefetch and bursts for sonics-to-pci translation 2 */ ++ OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST)); ++ ++ if (si->pcirev < 5) { ++ SET_SBREG(sbh, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK, ++ (0x3 << SBIMCL_RTO_SHIFT) | 0x2); ++ sb_commit(sbh); ++ } ++ ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); ++ ++ /* use large sb pci dma window */ ++ if (dmaoffset) ++ *dmaoffset = SB_PCI_DMA; ++} ++ ++uint32 ++sb_base(uint32 admatch) ++{ ++ uint32 base; ++ uint type; ++ ++ type = admatch & SBAM_TYPE_MASK; ++ ASSERT(type < 3); ++ ++ base = 0; ++ ++ if (type == 0) { ++ base = admatch & SBAM_BASE0_MASK; ++ } else if (type == 1) { ++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ ++ base = admatch & SBAM_BASE1_MASK; ++ } else if (type == 2) { ++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ ++ base = admatch & SBAM_BASE2_MASK; ++ } ++ ++ return (base); ++} ++ ++uint32 ++sb_size(uint32 admatch) ++{ ++ uint32 size; ++ uint type; ++ ++ type = admatch & SBAM_TYPE_MASK; ++ ASSERT(type < 3); ++ ++ size = 0; ++ ++ if (type == 0) { ++ size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1); ++ } else if (type == 1) { ++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ ++ size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1); ++ } else if (type == 2) { ++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ ++ size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1); ++ } ++ ++ return (size); ++} ++ ++/* return the core-type instantiation # of the current core */ ++uint ++sb_coreunit(void *sbh) ++{ ++ sb_info_t *si; ++ uint idx; ++ uint coreid; ++ uint coreunit; ++ uint i; ++ ++ si = SB_INFO(sbh); ++ coreunit = 0; ++ ++ idx = si->curidx; ++ ++ ASSERT(GOODREGS(si->curmap)); ++ coreid = sb_coreid(sbh); ++ ++ /* count the cores of our type */ ++ for (i = 0; i < idx; i++) ++ if (si->coreid[i] == coreid) ++ coreunit++; ++ ++ return (coreunit); ++} ++ ++static INLINE uint32 ++factor6(uint32 x) ++{ ++ switch (x) { ++ case CC_F6_2: return 2; ++ case CC_F6_3: return 3; ++ case CC_F6_4: return 4; ++ case CC_F6_5: return 5; ++ case CC_F6_6: return 6; ++ case CC_F6_7: return 7; ++ default: return 0; ++ } ++} ++ ++/* calculate the speed the SB would run at given a set of clockcontrol values */ ++uint32 ++sb_clock_rate(uint32 pll_type, uint32 n, uint32 m) ++{ ++ uint32 n1, n2, clock, m1, m2, m3, mc; ++ ++ n1 = n & CN_N1_MASK; ++ n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT; ++ ++ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) { ++ n1 = factor6(n1); ++ n2 += CC_F5_BIAS; ++ } else if (pll_type == PLL_TYPE2) { ++ n1 += CC_T2_BIAS; ++ n2 += CC_T2_BIAS; ++ ASSERT((n1 >= 2) && (n1 <= 7)); ++ ASSERT((n2 >= 5) && (n2 <= 23)); ++ } else if (pll_type == PLL_TYPE3) { ++ return (100000000); ++ } else ++ ASSERT((pll_type >= PLL_TYPE1) && (pll_type <= PLL_TYPE4)); ++ ++ clock = CC_CLOCK_BASE * n1 * n2; ++ ++ if (clock == 0) ++ return 0; ++ ++ m1 = m & CC_M1_MASK; ++ m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT; ++ m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT; ++ mc = (m & CC_MC_MASK) >> CC_MC_SHIFT; ++ ++ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) { ++ m1 = factor6(m1); ++ if (pll_type == PLL_TYPE1) ++ m2 += CC_F5_BIAS; ++ else ++ m2 = factor6(m2); ++ m3 = factor6(m3); ++ ++ switch (mc) { ++ case CC_MC_BYPASS: return (clock); ++ case CC_MC_M1: return (clock / m1); ++ case CC_MC_M1M2: return (clock / (m1 * m2)); ++ case CC_MC_M1M2M3: return (clock / (m1 * m2 * m3)); ++ case CC_MC_M1M3: return (clock / (m1 * m3)); ++ default: return (0); ++ } ++ } else { ++ ASSERT(pll_type == PLL_TYPE2); ++ ++ m1 += CC_T2_BIAS; ++ m2 += CC_T2M2_BIAS; ++ m3 += CC_T2_BIAS; ++ ASSERT((m1 >= 2) && (m1 <= 7)); ++ ASSERT((m2 >= 3) && (m2 <= 10)); ++ ASSERT((m3 >= 2) && (m3 <= 7)); ++ ++ if ((mc & CC_T2MC_M1BYP) == 0) ++ clock /= m1; ++ if ((mc & CC_T2MC_M2BYP) == 0) ++ clock /= m2; ++ if ((mc & CC_T2MC_M3BYP) == 0) ++ clock /= m3; ++ ++ return(clock); ++ } ++} ++ ++/* returns the current speed the SB is running at */ ++uint32 ++sb_clock(void *sbh) ++{ ++ sb_info_t *si; ++ extifregs_t *eir; ++ chipcregs_t *cc; ++ uint32 n, m; ++ uint idx; ++ uint32 pll_type, rate; ++ uint intr_val = 0; ++ ++ si = SB_INFO(sbh); ++ idx = si->curidx; ++ pll_type = PLL_TYPE1; ++ ++ INTR_OFF(si, intr_val); ++ ++ /* switch to extif or chipc core */ ++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { ++ n = R_REG(&eir->clockcontrol_n); ++ m = R_REG(&eir->clockcontrol_sb); ++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { ++ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; ++ n = R_REG(&cc->clockcontrol_n); ++ m = R_REG(&cc->clockcontrol_sb); ++ } else { ++ INTR_RESTORE(si, intr_val); ++ return 0; ++ } ++ ++ /* calculate rate */ ++ rate = sb_clock_rate(pll_type, n, m); ++ ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); ++ ++ INTR_RESTORE(si, intr_val); ++ ++ return rate; ++} ++ ++/* change logical "focus" to the gpio core for optimized access */ ++void* ++sb_gpiosetcore(void *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ ++ return (sb_setcoreidx(sbh, si->gpioidx)); ++} ++ ++/* mask&set gpiocontrol bits */ ++uint32 ++sb_gpiocontrol(void *sbh, uint32 mask, uint32 val) ++{ ++ sb_info_t *si; ++ uint regoff; ++ ++ si = SB_INFO(sbh); ++ regoff = 0; ++ ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpiocontrol); ++ break; ++ ++ case SB_PCI: ++ regoff = OFFSETOF(sbpciregs_t, gpiocontrol); ++ break; ++ ++ case SB_EXTIF: ++ return (0); ++ } ++ ++ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); ++} ++ ++/* mask&set gpio output enable bits */ ++uint32 ++sb_gpioouten(void *sbh, uint32 mask, uint32 val) ++{ ++ sb_info_t *si; ++ uint regoff; ++ ++ si = SB_INFO(sbh); ++ regoff = 0; ++ ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpioouten); ++ break; ++ ++ case SB_PCI: ++ regoff = OFFSETOF(sbpciregs_t, gpioouten); ++ break; ++ ++ case SB_EXTIF: ++ regoff = OFFSETOF(extifregs_t, gpio[0].outen); ++ break; ++ } ++ ++ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); ++} ++ ++/* mask&set gpio output bits */ ++uint32 ++sb_gpioout(void *sbh, uint32 mask, uint32 val) ++{ ++ sb_info_t *si; ++ uint regoff; ++ ++ si = SB_INFO(sbh); ++ regoff = 0; ++ ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpioout); ++ break; ++ ++ case SB_PCI: ++ regoff = OFFSETOF(sbpciregs_t, gpioout); ++ break; ++ ++ case SB_EXTIF: ++ regoff = OFFSETOF(extifregs_t, gpio[0].out); ++ break; ++ } ++ ++ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); ++} ++ ++/* return the current gpioin register value */ ++uint32 ++sb_gpioin(void *sbh) ++{ ++ sb_info_t *si; ++ uint regoff; ++ ++ si = SB_INFO(sbh); ++ regoff = 0; ++ ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpioin); ++ break; ++ ++ case SB_PCI: ++ regoff = OFFSETOF(sbpciregs_t, gpioin); ++ break; ++ ++ case SB_EXTIF: ++ regoff = OFFSETOF(extifregs_t, gpioin); ++ break; ++ } ++ ++ return (sb_corereg(sbh, si->gpioidx, regoff, 0, 0)); ++} ++ ++/* mask&set gpio interrupt polarity bits */ ++uint32 ++sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val) ++{ ++ sb_info_t *si; ++ uint regoff; ++ ++ si = SB_INFO(sbh); ++ regoff = 0; ++ ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpiointpolarity); ++ break; ++ ++ case SB_PCI: ++ /* pci gpio implementation does not support interrupt polarity */ ++ ASSERT(0); ++ break; ++ ++ case SB_EXTIF: ++ regoff = OFFSETOF(extifregs_t, gpiointpolarity); ++ break; ++ } ++ ++ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); ++} ++ ++/* mask&set gpio interrupt mask bits */ ++uint32 ++sb_gpiointmask(void *sbh, uint32 mask, uint32 val) ++{ ++ sb_info_t *si; ++ uint regoff; ++ ++ si = SB_INFO(sbh); ++ regoff = 0; ++ ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpiointmask); ++ break; ++ ++ case SB_PCI: ++ /* pci gpio implementation does not support interrupt mask */ ++ ASSERT(0); ++ break; ++ ++ case SB_EXTIF: ++ regoff = OFFSETOF(extifregs_t, gpiointmask); ++ break; ++ } ++ ++ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); ++} ++ ++ ++/* ++ * Return the slowclock min or max frequency. ++ * Three sources of SLOW CLOCK: ++ * 1. On Chip LPO - 32khz or 160khz ++ * 2. On Chip Xtal OSC - 20mhz/4*(divider+1) ++ * 3. External PCI clock - 66mhz/4*(divider+1) ++ */ ++static uint ++slowfreq(void *sbh, bool max) ++{ ++ sb_info_t *si; ++ chipcregs_t *cc; ++ uint32 v; ++ uint div; ++ ++ si = SB_INFO(sbh); ++ ++ ASSERT(sb_coreid(sbh) == SB_CC); ++ ++ cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx); ++ ++ /* shouldn't be here unless we've established the chip has dynamic power control */ ++ ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL); ++ ++ if (si->ccrev < 6) { ++ v = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)); ++ ++ if (v & PCI_CFG_GPIO_SCS) ++ return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64)); ++ else ++ return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32)); ++ } else { ++ v = R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK; ++ div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1); ++ if (v == SCC_SS_LPO) ++ return (max? LPOMAXFREQ : LPOMINFREQ); ++ else if (v == SCC_SS_XTAL) ++ return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div)); ++ else if (v == SCC_SS_PCI) ++ return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div)); ++ else ++ ASSERT(0); ++ } ++ return (0); ++} ++ ++/* initialize power control delay registers */ ++void ++sb_pwrctl_init(void *sbh) ++{ ++ sb_info_t *si; ++ uint origidx; ++ chipcregs_t *cc; ++ uint slowmaxfreq; ++ uint pll_on_delay, fref_sel_delay; ++ ++ si = SB_INFO(sbh); ++ ++ if (si->bus == SB_BUS) ++ return; ++ ++ origidx = si->curidx; ++ ++ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) ++ return; ++ ++ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) ++ goto done; ++ ++ slowmaxfreq = slowfreq(sbh, TRUE); ++ pll_on_delay = ((slowmaxfreq * PLL_DELAY) + 999999) / 1000000; ++ fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; ++ ++ W_REG(&cc->pll_on_delay, pll_on_delay); ++ W_REG(&cc->fref_sel_delay, fref_sel_delay); ++ ++ /* 4317pc does not work with SlowClock less than 5Mhz */ ++ if (si->bus == PCMCIA_BUS) ++ SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, (0 << SCC_CD_SHF)); ++ ++done: ++ sb_setcoreidx(sbh, origidx); ++} ++ ++/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */ ++uint16 ++sb_pwrctl_fast_pwrup_delay(void *sbh) ++{ ++ sb_info_t *si; ++ uint origidx; ++ chipcregs_t *cc; ++ uint slowminfreq; ++ uint16 fpdelay; ++ uint intr_val = 0; ++ ++ si = SB_INFO(sbh); ++ fpdelay = 0; ++ origidx = si->curidx; ++ ++ if (si->bus == SB_BUS) ++ goto done; ++ ++ INTR_OFF(si, intr_val); ++ ++ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) ++ goto done; ++ ++ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) ++ goto done; ++ ++ slowminfreq = slowfreq(sbh, FALSE); ++ fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq; ++ ++done: ++ sb_setcoreidx(sbh, origidx); ++ INTR_RESTORE(si, intr_val); ++ return (fpdelay); ++} ++ ++/* turn primary xtal and/or pll off/on */ ++int ++sb_pwrctl_xtal(void *sbh, uint what, bool on) ++{ ++ sb_info_t *si; ++ uint32 in, out, outen; ++ ++ si = SB_INFO(sbh); ++ ++ ++ if (si->bus == PCMCIA_BUS) { ++ return (0); ++ } ++ ++ if (si->bus != PCI_BUS) ++ return (-1); ++ ++ in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32)); ++ out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)); ++ outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32)); ++ ++ /* ++ * We can't actually read the state of the PLLPD so we infer it ++ * by the value of XTAL_PU which *is* readable via gpioin. ++ */ ++ if (on && (in & PCI_CFG_GPIO_XTAL)) ++ return (0); ++ ++ if (what & XTAL) ++ outen |= PCI_CFG_GPIO_XTAL; ++ if (what & PLL) ++ outen |= PCI_CFG_GPIO_PLL; ++ ++ if (on) { ++ /* turn primary xtal on */ ++ if (what & XTAL) { ++ out |= PCI_CFG_GPIO_XTAL; ++ if (what & PLL) ++ out |= PCI_CFG_GPIO_PLL; ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); ++ OSL_DELAY(200); ++ } ++ ++ /* turn pll on */ ++ if (what & PLL) { ++ out &= ~PCI_CFG_GPIO_PLL; ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); ++ OSL_DELAY(2000); ++ } ++ } else { ++ if (what & XTAL) ++ out &= ~PCI_CFG_GPIO_XTAL; ++ if (what & PLL) ++ out |= PCI_CFG_GPIO_PLL; ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); ++ } ++ ++ return (0); ++} ++ ++/* set dynamic power control mode (forceslow, forcefast, dynamic) */ ++/* returns true if ignore pll off is set and false if it is not */ ++bool ++sb_pwrctl_clk(void *sbh, uint mode) ++{ ++ sb_info_t *si; ++ uint origidx; ++ chipcregs_t *cc; ++ uint32 scc; ++ bool forcefastclk=FALSE; ++ uint intr_val = 0; ++ ++ si = SB_INFO(sbh); ++ ++ /* chipcommon cores prior to rev6 don't support slowclkcontrol */ ++ if (si->ccrev < 6) ++ return (FALSE); ++ ++ INTR_OFF(si, intr_val); ++ ++ origidx = si->curidx; ++ ++ cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0); ++ ASSERT(cc != NULL); ++ ++ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) ++ goto done; ++ ++ switch (mode) { ++ case CLK_FAST: /* force fast (pll) clock */ ++ /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */ ++ sb_pwrctl_xtal(sbh, XTAL, ON); ++ ++ SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP); ++ break; ++ ++ case CLK_SLOW: /* force slow clock */ ++ if ((si->bus == SDIO_BUS) || (si->bus == PCMCIA_BUS)) ++ return (-1); ++ ++ if (si->ccrev >= 6) ++ OR_REG(&cc->slow_clk_ctl, SCC_FS); ++ break; ++ ++ case CLK_DYNAMIC: /* enable dynamic power control */ ++ scc = R_REG(&cc->slow_clk_ctl); ++ scc &= ~(SCC_FS | SCC_IP | SCC_XC); ++ if ((scc & SCC_SS_MASK) != SCC_SS_XTAL) ++ scc |= SCC_XC; ++ W_REG(&cc->slow_clk_ctl, scc); ++ ++ /* for dynamic control, we have to release our xtal_pu "force on" */ ++ if (scc & SCC_XC) ++ sb_pwrctl_xtal(sbh, XTAL, OFF); ++ break; ++ } ++ ++ /* Is the h/w forcing the use of the fast clk */ ++ forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP); ++ ++done: ++ sb_setcoreidx(sbh, origidx); ++ INTR_RESTORE(si, intr_val); ++ return (forcefastclk); ++} ++ ++/* register driver interrupt disabling and restoring callback functions */ ++void ++sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intr_arg) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ si->intr_arg = intr_arg; ++ si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn; ++ si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn; ++ /* save current core id. when this function called, the current core ++ * must be the core which provides driver functions(il, et, wl, etc.) ++ */ ++ si->dev_coreid = si->coreid[si->curidx]; ++} ++ ++ +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/compressed/Makefile linux-2.6.12.5-brcm/arch/mips/bcm47xx/compressed/Makefile +--- linux-2.6.12.5/arch/mips/bcm47xx/compressed/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/compressed/Makefile 2005-08-28 11:12:20.482851248 +0200 +@@ -0,0 +1,71 @@ ++# ++# Makefile for Broadcom BCM947XX boards ++# ++# Copyright 2001-2003, Broadcom Corporation ++# All Rights Reserved. ++# ++# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++# ++# $Id$ ++# ++ ++# Link at 3 MB offset in RAM ++LOADADDR := 0x80001000 ++TEXT_START := 0x80500000 ++ifdef TEXTADDR ++LOADADDR := $(TEXTADDR) ++endif ++ ++STRIP := $(CROSS_COMPILE)strip ++ ++OBJCOPY := $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S ++ ++# SRCBASE := $(TOPDIR)/../.. ++VPATH := $(SRCBASE)/shared ++### Fix it by getting it from the Master rules ++ASFLAGS += -mno-abicalls -fno-pic -pipe -finline-limit=100000 -mips2 -Wa,--trap -I$(TOPDIR)/include/asm/mach-generic ++ASFLAGS += -I$(TOPDIR)/include/asm/gcc -nostdinc ++ASFLAGS += -D__ASSEMBLY__ -I$(TOPDIR)/arch/mips/bcm47xx/broadcom/include -I$(TOPDIR)/include -DLOADADDR=$(LOADADDR) ++CFLAGS += -I$(TOPDIR)/arch/mips/bcm47xx/broadcom/include -I$(TOPDIR)/include -DLOADADDR=$(LOADADDR) ++CFLAGS += -I$(TOPDIR)/include/asm/gcc -I$(TOPDIR)/include/asm/mach-generic ++ifdef CONFIG_MCOUNT ++CFLAGS := $(subst -pg,,$(CFLAGS)) ++endif ++SEDFLAGS := s/TEXT_START/$(TEXT_START)/ ++ ++SYSTEM := $(TOPDIR)/vmlinux ++#OBJECTS := head.o sbsdram.o misc.o sflash.o ++# Don't use nvram or dram initalization.Hope cfe to do it or kernel. ++OBJECTS := head.o misc.o ++ ++all: zImage ++ ++# Don't build dependencies, this may die if $(CC) isn't gcc ++dep: ++ ++bzImage: vmlinux ++ $(OBJCOPY) $< $@ ++ ++vmlinux: vmlinux.lds $(OBJECTS) piggy.o ++ $(LD) -no-warn-mismatch -T vmlinux.lds -o $@ $(OBJECTS) piggy.o ++ $(STRIP) $@ ++ ++vmlinux.lds: vmlinux.lds.in Makefile ++ @sed "$(SEDFLAGS)" < $< > $@ ++ ++piggy.o: $(SYSTEM) ++ cp $(SYSTEM) $(TOPDIR)/vmlinuxs ++ $(STRIP) $(TOPDIR)/vmlinuxs ++ $(OBJCOPY) $(TOPDIR)/vmlinuxs piggy ++ gzip -c9 piggy > vmlinuz ++ echo "SECTIONS { .data : { input_len = .; LONG(input_data_end - input_data) input_data = .; *(.data) input_data_end = .; }}" > piggy.lnk ++ $(LD) -no-warn-mismatch -T piggy.lnk -r -o $@ -b binary vmlinuz -b elf32-tradlittlemips ++ rm $(TOPDIR)/vmlinuxs ++ ++mrproper: clean ++ ++clean: ++ rm -f vmlinux vmlinuz zImage vmlinux.lds piggy piggy.lnk *.o +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/compressed/head.S linux-2.6.12.5-brcm/arch/mips/bcm47xx/compressed/head.S +--- linux-2.6.12.5/arch/mips/bcm47xx/compressed/head.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/compressed/head.S 2005-08-28 11:12:20.502848208 +0200 +@@ -0,0 +1,84 @@ ++/* ++ * BCM947XX Self-Booting Linux ++ * ++ * Code should be position-independent until it copies itself to SDRAM. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include <asm/asm.h> ++#include <asm/regdef.h> ++#include <asm/addrspace.h> ++#include <asm/mipsregs.h> ++#include <bcm4710.h> ++ ++ .text ++ LEAF(startup) ++ .set noreorder ++ ++/* Dont look at nvram now for dram initalization. Hope cfe/bootloader did it. Fix it latter */ ++ ++ blt t0, t1, inram ++ nop ++ ++#if 0 ++ /* Check if we booted from SDRAM */ ++ bal 1f ++ nop ++1: li t0, 0x1fffffff ++ and t0, t0, ra ++ li t1, BCM4710_FLASH ++ blt t0, t1, inram ++ nop ++ ++ /* Initialize SDRAM */ ++ li t0, KSEG1ADDR(BCM4710_FLASH) ++ la t1, text_start ++ la t2, board_draminit ++ sub t2, t2, t1 ++ add t2, t2, t0 ++ jalr t2 ++ nop ++ ++ /* Copy self to SDRAM */ ++ li a0, BCM4710_FLASH ++ la a1, text_start ++ la a2, input_data ++1: lw t0, 0(a0) ++ sw t0, 0(a1) ++ add a0, 4 ++ add a1, 4 ++ blt a1, a2, 1b ++ nop ++#endif ++inram: ++ /* Set up stack pointer */ ++ li sp, 0x80800000 - 4 ++ ++ /* Clear BSS */ ++ la a0, bss_start ++ la a1, bss_end ++1: sw zero, 0(a0) ++ addi a0, a0, 4 ++ blt a0, a1, 1b ++ nop ++ ++ /* Jump to C */ ++ la t0, c_main ++ jal t0 ++ move a0, ra ++ ++ /* Embedded NVRAM */ ++ .balign 0x400 ++ .space 0x2000 ++ ++ .set reorder ++ END(startup) +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/compressed/misc.c linux-2.6.12.5-brcm/arch/mips/bcm47xx/compressed/misc.c +--- linux-2.6.12.5/arch/mips/bcm47xx/compressed/misc.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/compressed/misc.c 2005-08-28 11:12:20.503848056 +0200 +@@ -0,0 +1,1183 @@ ++/* ++ * Misc initialization and support routines for self-booting ++ * compressed image. ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/sched.h> ++#include <linux/mm.h> ++#include <linux/serial_reg.h> ++#include <linux/serial.h> ++#include <linux/delay.h> ++ ++#include <asm/bootinfo.h> ++#include <asm/cpu.h> ++#include <asm/bcache.h> ++#include <asm/io.h> ++#include <asm/page.h> ++#include <asm/pgtable.h> ++#include <asm/system.h> ++#include <asm/mmu_context.h> ++ ++#include <typedefs.h> ++#include <bcmdevs.h> ++#include <bcmnvram.h> ++#include <bcmutils.h> ++#include <sbconfig.h> ++#include <sbextif.h> ++#include <sbchipc.h> ++#include <sbmips.h> ++#include <sbmemc.h> ++#include <sflash.h> ++ ++/* At 125 MHz */ ++unsigned long loops_per_jiffy = 625000; ++ ++/* Static variables */ ++static unsigned int chipid, chiprev, mipscore; ++static unsigned int sbclock, mipsclock; ++static extifregs_t *eir; ++static chipcregs_t *cc; ++static mipsregs_t *mipsr; ++static sbmemcregs_t *memc; ++static void *usb; ++static struct serial_struct uart; ++static struct sflash *sflash; ++ ++#define LOG_BUF_LEN (1024) ++#define LOG_BUF_MASK (LOG_BUF_LEN-1) ++static char log_buf[LOG_BUF_LEN]; ++static unsigned long log_start; ++ ++/* Declarations needed for the cache related includes below */ ++ ++/* Primary cache parameters. These declarations are needed*/ ++static int icache_size, dcache_size; /* Size in bytes */ ++static int ic_lsize, dc_lsize; /* LineSize in bytes */ ++ ++/* Chip information */ ++unsigned int bcm_chipid = BCM4710_DEVICE_ID; ++unsigned int bcm_chiprev = 0; ++ ++#if 0 /* fix latter ... hope cfe has done it */ ++#include <asm/cacheops.h> ++#include <asm/bcm4710_cache.h> ++ ++__BUILD_SET_C0(taglo,CP0_TAGLO); ++__BUILD_SET_C0(taghi,CP0_TAGHI); ++ ++static void ++cache_init(void) ++{ ++ unsigned int config1; ++ unsigned int sets, ways; ++ unsigned int start, end; ++ ++ config1 = read_c0_config1(); ++ ++ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */ ++ if ((ic_lsize = ((config1 >> 19) & 7))) ++ ic_lsize = 2 << ic_lsize; ++ sets = 64 << ((config1 >> 22) & 7); ++ ways = 1 + ((config1 >> 16) & 7); ++ icache_size = ic_lsize * sets * ways; ++ ++ start = KSEG0; ++ end = (start + icache_size); ++ clear_c0_taglo(~0); ++ clear_c0_taghi(~0); ++ while (start < end) { ++ cache_unroll(start, Index_Store_Tag_I); ++ start += ic_lsize; ++ } ++ ++ /* Data Cache Size = Associativity * Line Size * Sets Per Way */ ++ if ((dc_lsize = ((config1 >> 10) & 7))) ++ dc_lsize = 2 << dc_lsize; ++ sets = 64 << ((config1 >> 13) & 7); ++ ways = 1 + ((config1 >> 7) & 7); ++ dcache_size = dc_lsize * sets * ways; ++ ++ start = KSEG0; ++ end = (start + dcache_size); ++ clear_c0_taglo(~0); ++ clear_c0_taghi(~0); ++ while (start < end) { ++ cache_unroll(start, Index_Store_Tag_D); ++ start += dc_lsize; ++ } ++} ++#endif ++ ++static inline unsigned int ++serial_in(struct serial_struct *info, int offset) ++{ ++#ifdef CONFIG_BCM4310 ++ readb((unsigned long) info->iomem_base + ++ (UART_SCR<<info->iomem_reg_shift)); ++#endif ++ return readb((unsigned long) info->iomem_base + ++ (offset<<info->iomem_reg_shift)); ++} ++ ++static inline void ++serial_out(struct serial_struct *info, int offset, int value) ++{ ++#ifdef SIM ++ return; ++#else ++ writeb(value, (unsigned long) info->iomem_base + ++ (offset<<info->iomem_reg_shift)); ++#endif ++} ++ ++static void ++sb_scan(void) ++{ ++ int i; ++ unsigned long cid, regs; ++ sbconfig_t *sb; ++ ++ /* Initialize static variables */ ++ eir = NULL; ++ cc = NULL; ++ usb = NULL; ++ memc = NULL; ++ mipsr = NULL; ++ mipscore = 0; ++ chipid = BCM4710_DEVICE_ID; ++ chiprev = 0; ++ ++ /* Too early to probe or malloc */ ++ for (i = 0; i < SB_MAXCORES; i++) { ++ regs = SB_ENUM_BASE + (i * SB_CORE_SIZE); ++ sb = (sbconfig_t *) KSEG1ADDR(regs + SBCONFIGOFF); ++ cid = (readl(&sb->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT; ++ switch (cid) { ++ case SB_EXTIF: ++ eir = (extifregs_t *) KSEG1ADDR(regs); ++ break; ++ case SB_CC: ++ cc = (chipcregs_t *) KSEG1ADDR(regs); ++ chipid = readl(&cc->chipid) & CID_ID_MASK; ++ chiprev = (readl(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT; ++ break; ++ case SB_USB: ++ usb = (void *)KSEG1ADDR(regs); ++ break; ++ case SB_MEMC: ++ memc = (void *)KSEG1ADDR(regs); ++ break; ++ case SB_MIPS: ++ case SB_MIPS33: ++ mipsr = (void *)KSEG1ADDR(regs); ++ mipscore = cid; ++ break; ++ } ++ if (eir) ++ break; ++ if (cc && mipsr) { ++ if (chipid == BCM4310_DEVICE_ID && chiprev == 0 && !usb) ++ continue; ++ else if (!memc) ++ continue; ++ break; ++ } ++ } ++} ++ ++static int ++keyhit(void) ++{ ++#ifdef SIM ++ return(1); ++#endif ++ ++ return ((serial_in(&uart, UART_LSR) & UART_LSR_DR) != 0); ++} ++ ++static int ++getc(void) ++{ ++#ifdef SIM ++ return(0); ++#endif ++ ++ while (!(serial_in(&uart, UART_LSR) & UART_LSR_DR)); ++ return (serial_in(&uart, UART_RX)); ++} ++ ++static void ++putc(int c) ++{ ++#ifdef SIM ++ return; ++#endif ++ /* CR before LF */ ++ if (c == '\n') ++ putc('\r'); ++ ++ /* Store in log buffer */ ++ *((char *) KSEG1ADDR(&log_buf[log_start])) = (char) c; ++ log_start = (log_start + 1) & LOG_BUF_MASK; ++ ++ while (!(serial_in(&uart, UART_LSR) & UART_LSR_THRE)); ++ serial_out(&uart, UART_TX, c); ++} ++ ++static void ++puts(const char *cs) ++{ ++#ifdef SIM ++ return; ++#else ++ char *s = (char *) cs; ++ short c; ++ ++ while (1) { ++ c = *(short *)(s); ++ if ((char)(c & 0xff)) ++ putc((char)(c & 0xff)); ++ else ++ break; ++ if ((char)((c >> 8) & 0xff)) ++ putc((char)((c >> 8) & 0xff)); ++ else ++ break; ++ s += sizeof(short); ++ } ++#endif ++} ++ ++static void ++puthex(unsigned int h) ++{ ++#ifdef SIM ++ return; ++#else ++ char c; ++ int i; ++ ++ for (i = 7; i >= 0; i--) { ++ c = (char)((h >> (i * 4)) & 0xf); ++ c += (c > 9) ? ('a' - 10) : '0'; ++ putc(c); ++ } ++#endif ++} ++ ++void ++putdec(unsigned int d) ++{ ++#ifdef SIM ++ return; ++#else ++ int leading_zero; ++ unsigned int divisor, result, remainder; ++ ++ leading_zero = 1; ++ remainder = d; ++ ++ for (divisor = 1000000000; ++ divisor > 0; ++ divisor /= 10) { ++ result = remainder / divisor; ++ remainder %= divisor; ++ ++ if (result != 0 || divisor == 1) ++ leading_zero = 0; ++ ++ if (leading_zero == 0) ++ putc((char)(result) + '0'); ++ } ++#endif ++} ++ ++static INLINE uint32 ++factor6(uint32 x) ++{ ++ switch (x) { ++ case CC_F6_2: return 2; ++ case CC_F6_3: return 3; ++ case CC_F6_4: return 4; ++ case CC_F6_5: return 5; ++ case CC_F6_6: return 6; ++ case CC_F6_7: return 7; ++ default: return 0; ++ } ++} ++ ++/* calculate the speed the SB would run at given a set of clockcontrol values */ ++static uint32 ++sb_clock_rate(uint32 pll_type, uint32 n, uint32 m) ++{ ++#if 1 /* PLL clock ??? */ ++#warning "Fix Me....................... misc.c sb_clock_rate" ++ return 100; ++#else ++ uint32 n1, n2, clock, m1, m2, m3, mc; ++ ++ n1 = n & CN_N1_MASK; ++ n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT; ++ ++ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) { ++ n1 = factor6(n1); ++ n2 += CC_F5_BIAS; ++ } else if (pll_type == PLL_TYPE2) { ++ n1 += CC_T2_BIAS; ++ n2 += CC_T2_BIAS; ++ } else if (pll_type == PLL_TYPE3) { ++ return (100000000); ++ } ++ ++ clock = CC_CLOCK_BASE * n1 * n2; ++ ++ if (clock == 0) ++ return 0; ++ ++ m1 = m & CC_M1_MASK; ++ m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT; ++ m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT; ++ mc = (m & CC_MC_MASK) >> CC_MC_SHIFT; ++ ++ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) { ++ m1 = factor6(m1); ++ if (pll_type == PLL_TYPE1) ++ m2 += CC_F5_BIAS; ++ else ++ m2 = factor6(m2); ++ m3 = factor6(m3); ++ ++ switch (mc) { ++ case CC_MC_BYPASS: return (clock); ++ case CC_MC_M1: return (clock / m1); ++ case CC_MC_M1M2: return (clock / (m1 * m2)); ++ case CC_MC_M1M2M3: return (clock / (m1 * m2 * m3)); ++ case CC_MC_M1M3: return (clock / (m1 * m3)); ++ default: return (0); ++ } ++ } else { ++ m1 += CC_T2_BIAS; ++ m2 += CC_T2M2_BIAS; ++ m3 += CC_T2_BIAS; ++ ++ if ((mc & CC_T2MC_M1BYP) == 0) ++ clock /= m1; ++ if ((mc & CC_T2MC_M2BYP) == 0) ++ clock /= m2; ++ if ((mc & CC_T2MC_M3BYP) == 0) ++ clock /= m3; ++ ++ return(clock); ++ } ++#endif ++} ++ ++static void ++uart_init(int baud) ++{ ++ sbconfig_t *sb; ++ unsigned long base, hz, ns, tmp; ++ int quot; ++ ++ if (eir) { ++#if 0 ++ /* Determine external UART register base */ ++ sb = (sbconfig_t *)((unsigned int) eir + SBCONFIGOFF); ++ base = EXTIF_CFGIF_BASE(readl(&sb->sbadmatch1) & SBAM_BASE1_MASK); ++ ++ /* Enable programmable interface */ ++ writel(CF_EN, &eir->prog_config); ++ ++ /* Calculate clock cycle */ ++ sbclock = mipsclock = hz = sb_clock_rate(PLL_TYPE1, readl(&eir->clockcontrol_n), readl(&eir->clockcontrol_sb)); ++ hz = hz ? : 100000000; ++ ns = 1000000000 / hz; ++ ++ /* Set programmable interface timing for external uart */ ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */ ++ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */ ++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ ++ writel(tmp, &eir->prog_waitcount); /* 0x01020a0c for a 100Mhz clock */ ++ ++ uart.baud_base = 13500000 / 16; ++ uart.iomem_reg_shift = 0; ++ uart.iomem_base = (u8 *) KSEG1ADDR(base); ++#endif ++ } else if (cc) { ++ uint32 rev, cap, pll_type, tmp; ++ ++ /* Determine core revision */ ++ sb = (sbconfig_t *)((unsigned int) cc + SBCONFIGOFF); ++ rev = readl(&sb->sbidhigh) & SBIDH_RC_MASK; ++ cap = readl(&cc->capabilities); ++ pll_type = cap & CAP_PLL_MASK; ++ ++ /* Determine internal UART clock source */ ++ if (bcm_chipid ==BCM5365_DEVICE_ID) { ++#ifdef CONFIG_BCM5XXX_FPGA ++ uart.baud_base = 2000000; ++#else ++ uart.baud_base = 1850000; ++#endif ++ }else if (pll_type ==0x0010000) { ++ /* PLL clock */ ++ uart.baud_base = sb_clock_rate(pll_type, readl(&cc->clockcontrol_n), ++ readl(&cc->clockcontrol_m2)); ++ sbclock = mipsclock = hz = sb_clock_rate(pll_type, readl(&cc->clockcontrol_n), ++ readl(&cc->clockcontrol_sb)); ++ } else { ++ uint32 div; ++ ++ sbclock = hz = sb_clock_rate(pll_type, readl(&cc->clockcontrol_n), ++ readl(&cc->clockcontrol_sb)); ++ mipsclock = sb_clock_rate(pll_type, readl(&cc->clockcontrol_n), ++ readl(&cc->clockcontrol_mips)); ++ /* Internal backplane clock */ ++ if (rev >= 3) { ++ uart.baud_base = sbclock; ++ div = uart.baud_base / 1843200; ++ writel(div, &cc->uart_clkdiv); ++ } else { ++ uart.baud_base = 88000000; ++ div = 48; ++ } ++ if ((rev > 0) && ((readl(&cc->corecontrol) & CC_UARTCLKO) == 0)) { ++ /* If UartClkOvveride is not set then t depends on strapping ++ * as reflected by the UCLKSEL field; ++ */ ++ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) { ++ /* Internal divided backplane clock */ ++ uart.baud_base /= div; ++ } else { ++ /* Assume external clock of 1.8432 MHz */ ++ uart.baud_base = 1843200; ++ } ++ } ++ } ++ ns = 1000000000 / hz; ++ ++#if 0 ++ /* Set timing for the flash */ ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */ ++ tmp |= CEIL(120, ns); /* W0 = 120nS */ ++ writel(tmp, &cc->parallelflashwaitcnt); ++#endif ++ ++ writel(tmp, &cc->cs01memwaitcnt); ++ ++ uart.baud_base /= 16; ++ uart.iomem_reg_shift = 0; ++#if 1 ++#warning "UART base Fix copied from linux " ++#define UART_BASE 0xb8000400 ++ uart.iomem_base = (u8 *) UART_BASE; ++#if 0 ++ if (rev) ++ uart.iomem_base = (u8 *) &cc->uart0data + (uart.line * 256); ++ else ++ uart.iomem_base = (u8 *) &cc->uart0data + (uart.line * 8); ++#endif ++#else ++ uart.iomem_base = (u8 *) &cc->uart0data; ++#endif ++ } ++ ++ loops_per_jiffy = 5 * (mipsclock / 1000); ++ ++ /* Set baud and 8N1 */ ++ quot = uart.baud_base / baud; ++ serial_out(&uart, UART_LCR, UART_LCR_DLAB); ++ serial_out(&uart, UART_DLL, quot & 0xff); ++ serial_out(&uart, UART_DLM, quot >> 8); ++ serial_out(&uart, UART_LCR, UART_LCR_WLEN8); ++} ++ ++static void ++reset_usb(chipcregs_t *cc, void *usb) ++{ ++#if defined(CONFIG_USB_OHCI) || defined(CONFIG_USBDEV) ++ sbconfig_t *sb; ++ ++ sb = (sbconfig_t *)((unsigned int) usb + SBCONFIGOFF); ++ if ((readl(&cc->intstatus) & 0x80000000) == 0 && ++ (readl(&sb->sbidhigh) & SBIDH_RC_MASK) == 1) { ++ /* Reset USB host core into sane state */ ++ writel((1 << 29) | SBTML_RESET | SBTML_CLK, &sb->sbtmstatelow); ++ udelay(10); ++ /* Reset USB device core into sane state */ ++ writel(SBTML_RESET | SBTML_CLK, &sb->sbtmstatelow); ++ udelay(10); ++ /* Reset backplane to 96 MHz */ ++ writel(0x0303, &cc->clockcontrol_n); ++ writel(0x04020011, &cc->clockcontrol_sb); ++ writel(0x11030011, &cc->clockcontrol_pci); ++ writel(0x01050811, &cc->clockcontrol_m2); ++ writel(1, &cc->watchdog); ++ while (1); ++ } ++#endif ++} ++ ++static void ++error(char *x) ++{ ++ puts("\n\n"); ++ puts(x); ++ puts("\n\n -- System halted"); ++ ++ while(1); /* Halt */ ++} ++ ++ ++/* ++ * gzip declarations ++ */ ++ ++#define OF(args) args ++#define STATIC static ++ ++#undef memset ++#undef memcpy ++#define memzero(s, n) memset ((s), 0, (n)) ++ ++typedef unsigned char uch; ++typedef unsigned short ush; ++typedef unsigned long ulg; ++ ++#define WSIZE 0x8000 /* Window size must be at least 32k, */ ++ /* and a power of two */ ++ ++static uch *inbuf; /* input buffer */ ++static ulg tmp; ++static uch window[WSIZE]; /* Sliding window buffer */ ++ ++static unsigned insize; /* valid bytes in inbuf */ ++static unsigned inptr; /* index of next byte to be processed in inbuf */ ++static unsigned outcnt; /* bytes in output buffer */ ++ ++/* gzip flag byte */ ++#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ ++#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ ++#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ ++#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ ++#define COMMENT 0x10 /* bit 4 set: file comment present */ ++#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ ++#define RESERVED 0xC0 /* bit 6,7: reserved */ ++ ++extern uch input_data[]; ++extern int input_len; ++extern char text_start[], text_end[]; ++extern char data_start[], data_end[]; ++extern char bss_start[], bss_end[]; ++ ++static inline uch ++get_byte(void) ++{ ++ if (sflash) { ++#if 0 ++ uch c; ++ sflash_read(cc, inptr++, 1, &c); ++ return c; ++#endif ++ } else { ++ if ((inptr % 4) == 0) ++ tmp = *((ulg *) &inbuf[inptr]); ++ return ((uch *) &tmp)[inptr++ % 4]; ++ } ++} ++ ++/* Diagnostic functions */ ++#ifdef DEBUG ++# define Assert(cond,msg) {if(!(cond)) error(msg);} ++# define Trace(x) fprintf x ++# define Tracev(x) {if (verbose) fprintf x ;} ++# define Tracevv(x) {if (verbose>1) fprintf x ;} ++# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} ++# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} ++#else ++# define Assert(cond,msg) ++# define Trace(x) ++# define Tracev(x) ++# define Tracevv(x) ++# define Tracec(c,x) ++# define Tracecv(c,x) ++#endif ++ ++static void flush_window(void); ++static void error(char *m); ++static void gzip_mark(void **); ++static void gzip_release(void **); ++ ++static uch *output_data; ++static ulg output_ptr; ++static ulg bytes_out; ++ ++static void *malloc(int size); ++static void free(void *where); ++static void error(char *m); ++static void gzip_mark(void **); ++static void gzip_release(void **); ++ ++static void puts(const char *); ++ ++extern int end; ++static ulg free_mem_ptr; ++static ulg free_mem_ptr_end; ++ ++#define HEAP_SIZE 0x2000 ++ ++#include "../../../../../lib/inflate.c" ++ ++static void * ++malloc(int size) ++{ ++ void *p; ++ ++ if (size <0) error("Malloc error\n"); ++ if (free_mem_ptr <= 0) error("Memory error\n"); ++ ++ free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ ++ ++ p = (void *)free_mem_ptr; ++ free_mem_ptr += size; ++ ++ if (free_mem_ptr >= free_mem_ptr_end) ++ error("Out of memory"); ++ return p; ++} ++ ++static void ++free(void *where) ++{ /* gzip_mark & gzip_release do the free */ ++} ++ ++static void ++gzip_mark(void **ptr) ++{ ++ *ptr = (void *) free_mem_ptr; ++} ++ ++static void ++gzip_release(void **ptr) ++{ ++ free_mem_ptr = (long) *ptr; ++} ++ ++void* ++memset(void* s, int c, size_t n) ++{ ++ int i; ++ char *ss = (char*)s; ++ ++ for (i=0;i<n;i++) ss[i] = c; ++ return s; ++} ++ ++void* ++memcpy(void* __dest, __const void* __src, size_t __n) ++{ ++ int i; ++ char *d = (char *)__dest, *s = (char *)__src; ++ ++ for (i=0;i<__n;i++) d[i] = s[i]; ++ return __dest; ++} ++ ++/* =========================================================================== ++ * Write the output window window[0..outcnt-1] and update crc and bytes_out. ++ * (Used for the decompressed data only.) ++ */ ++void ++flush_window(void) ++{ ++ ulg c = crc; ++ unsigned n; ++ uch *in, *out, ch; ++ ++ in = window; ++ out = &output_data[output_ptr]; ++ for (n = 0; n < outcnt; n++) { ++ ch = *out++ = *in++; ++ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); ++ } ++ crc = c; ++ bytes_out += (ulg)outcnt; ++ output_ptr += (ulg)outcnt; ++ outcnt = 0; ++ puts("."); ++} ++ ++static void ++decompress_kernel(void) ++{ ++#if 1 /* Fix Me */ ++ inbuf = (uch *) 0x80500000; ++#else ++ /* Decompress from flash */ ++ inbuf = (uch *) KSEG1ADDR(0x1fc00000); ++#endif ++ insize = input_len; ++ inptr = (unsigned) input_data - (unsigned) text_start; ++ output_data = (uch *) LOADADDR; ++ free_mem_ptr = (ulg) bss_end; ++ free_mem_ptr_end = (ulg) bss_end + 0x100000; ++ ++ makecrc(); ++ puts("Uncompressing Linux..."); ++ ++ gunzip(); ++ ++ puts("done, booting the kernel.\n"); ++ ++#if 0 ++ /* Flush all caches */ ++ blast_dcache(); ++ blast_icache(); ++#endif ++ ++ /* Jump to kernel */ ++ ((void (*)(void)) LOADADDR)(); ++} ++ ++#if 0 ++static void ++sflash_self(chipcregs_t *cc) ++{ ++ unsigned char *start = text_start; ++ unsigned char *end = data_end; ++ unsigned char *cur = start; ++ unsigned int erasesize, len; ++ ++ while (cur < end) { ++ /* Erase sector */ ++ puts("Erasing sector 0x"); ++ puthex(cur - start); ++ puts("..."); ++ if ((erasesize = sflash_erase(cc, cur - start)) < 0) { ++ puts("error\n"); ++ break; ++ } ++ while (sflash_poll(cc, cur - start)); ++ puts("done\n"); ++ ++ /* Write sector */ ++ puts("Writing sector 0x"); ++ puthex(cur - start); ++ puts("..."); ++ while (erasesize) { ++ if ((len = sflash_write(cc, cur - start, erasesize, cur)) < 0) ++ break; ++ while (sflash_poll(cc, cur - start)); ++ cur += len; ++ erasesize -= len; ++ } ++ if (erasesize) { ++ puts("error\n"); ++ break; ++ } ++ puts("done\n"); ++ } ++} ++ ++static void ++_change_cachability(u32 cm) ++{ ++ u32 prid; ++ ++ change_c0_config(CONF_CM_CMASK, cm); ++ prid = read_c0_prid(); ++ if ((prid & (PRID_COMP_MASK | PRID_IMP_MASK)) == ++ (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) { ++ cm = read_c0_diag(); ++ /* Enable icache */ ++ cm |= (1 << 31); ++ /* Enable dcache */ ++ cm |= (1 << 30); ++ write_c0_diag(cm); ++ } ++} ++static void (*change_cachability)(u32); ++ ++#define HANDLER_ADDR 0xa0000180 ++ ++void ++handler(void) ++{ ++ /* enable interrupts */ ++ clear_c0_status(IE_IRQ5 | IE_IRQ4 | IE_IRQ3 | IE_IRQ2 | IE_IRQ1 | IE_IRQ0 | ST0_IE); ++ ++ __asm__ __volatile__ (".set\tmips32\n\t" ++ "ssnop\n\t" ++ "ssnop\n\t" ++ "eret\n\t" ++ "nop\n\t" ++ "nop\n\t" ++ ".set\tmips0"); /* step 11 */ ++} ++/* The followint MUST come right after handler() */ ++void ++afterhandler(void) ++{ ++} ++ ++#define BCM4704_DEFAULT_MIPS_CLOCK 200000000 ++static unsigned int target_mips_clock = 264000000; ++static unsigned int target_sb_clock = 132000000; ++ ++typedef struct { ++ uint32 mipsclock; ++ uint32 sbclock; ++ uint16 n; ++ uint32 sb; ++ uint32 pci; ++ uint32 m2; ++ uint32 m3; ++ uint ratio; ++ uint32 ratio_parm; ++} sb_clock_table_t; ++ ++static sb_clock_table_t sb_clock_table[] = { ++ { 180000000, 90000000, 0x0403, 0x02000002, 0x00000002, 0x02000002, 0x06000002, 0x21, 0x0aaa0555}, ++ { 200000000, 100000000, 0x0303, 0x02010000, 0x02040001, 0x02010000, 0x06000001, 0x21, 0x0aaa0555}, ++ { 264000000, 132000000, 0x0903, 0x02000003, 0x04000702, 0x02000003, 0x06000003, 0x21, 0x0aaa0555}, ++ { 280000000, 140000000, 0x0503, 0x02010000, 0x00010001, 0x02010000, 0x06000001, 0x21, 0x0aaa0555}, ++ { 288000000, 144000000, 0x0404, 0x02010000, 0x00010001, 0x02010000, 0x06000001, 0x21, 0x0aaa0555}, ++ { 300000000, 150000000, 0x0803, 0x02000002, 0x00010002, 0x02000002, 0x06000002, 0x21, 0x0aaa0555}, ++ { 180000000, 80000000, 0x0403, 0x02010001, 0x00000002, 0x00010101, 0x06000002, 0x49, 0x012A00A9}, ++ { 234000000, 104000000, 0x0b01, 0x02010001, 0x04000204, 0x00010101, 0x06000002, 0x49, 0x01250125}, ++ { 300000000, 133333333, 0x0803, 0x02010001, 0x00010101, 0x00010101, 0x06000002, 0x49, 0x012a0115}, ++ { 0 } ++}; ++ ++void ++change_clock(void) ++{ ++ int c; ++ u32 s, e, d, i, tmp, ratio_parm; ++ sb_clock_table_t *cte, *ccte = NULL, *tcte = NULL; ++ ++ /* Change the clock and reboot if needed */ ++ /* Gross hack for now to go all the way */ ++ if (chipid == BCM4704_DEVICE_ID) { ++ if (mipsclock != BCM4704_DEFAULT_MIPS_CLOCK) { ++ target_mips_clock = mipsclock; ++ target_sb_clock = sbclock; ++ } ++ if ((mipsclock != target_mips_clock) || (sbclock != target_sb_clock)) { ++ for (cte = sb_clock_table; cte->mipsclock; cte++) { ++ if ((cte->mipsclock == mipsclock) && (cte->sbclock == sbclock)) ++ ccte = cte; ++ if ((cte->mipsclock == target_mips_clock) && (cte->sbclock == target_sb_clock)) ++ tcte = cte; ++ } ++ ++ if ((ccte == NULL) || (tcte == NULL)) { ++ puts("\nCould not figure out current or target settings"); ++ goto nochange; ++ } ++ ++ puts("Run at "); ++ putdec(tcte->mipsclock); ++ putc('/'); ++ putdec(tcte->sbclock); ++ putc('?'); ++ c = 'y'; ++ for (i = 50; i; i--) { ++ if (keyhit()) { ++ c = getc() | 0x20; ++ break; ++ } ++ if ((i % 10) == 0) ++ putc('.'); ++ mdelay(100); ++ } ++ if (c != 'y') { ++ for (i = 0, cte = sb_clock_table; cte->mipsclock; i++, cte++) { ++ puts("\n ["); ++ putdec(i); ++ puts("] = "); ++ putdec(cte->mipsclock); ++ putc('/'); ++ putdec(cte->sbclock); ++ if (cte == tcte) ++ putc('*'); ++ } ++ ++ while (1) { ++ puts("\nChange to ?"); ++ c = getc() - '0'; ++ if ((c >= 0) && (c < i)) ++ tcte = &sb_clock_table[c]; ++ else { ++ puts("\nPlase type a number from 0 to "); ++ putdec(i - 1); ++ continue; ++ } ++ target_mips_clock = tcte->mipsclock; ++ target_sb_clock = tcte->sbclock; ++ puts("\nChanging to "); ++ putdec(tcte->mipsclock); ++ putc('/'); ++ putdec(tcte->sbclock); ++ puts(", ok?"); ++ c = getc() | 0x20; ++ if (c == 'y') ++ break; ++ } ++ } ++ if (tcte == ccte) ++ goto nochange; ++ ++ /* Set the pll controls now */ ++ writel(tcte->n, &cc->clockcontrol_n); ++ writel(tcte->sb, &cc->clockcontrol_sb); ++ writel(tcte->pci, &cc->clockcontrol_pci); ++ writel(tcte->m2, &cc->clockcontrol_m2); ++ writel(tcte->m3, &cc->clockcontrol_mips); ++ ++ if (tcte->ratio_parm != ccte->ratio_parm) { ++ puts("\nChanging ratio_parm to 0x"); ++ puthex(tcte->ratio_parm); ++ puts(", type new one to override: "); ++ ratio_parm = 0; ++ while (1) { ++ c = getc() & 0x7f; ++ putc(c); ++ if ((c == 'x') || (c == 'X')) { ++ ratio_parm = 0; ++ continue; ++ } ++ if ((c >= '0') && (c <= '9')) { ++ ratio_parm = (ratio_parm << 4) + (c - '0'); ++ continue; ++ } ++ c &= ~0x20; ++ if ((c >= 'A') && (c <= 'F')) ++ ratio_parm = (ratio_parm << 4) + (c - 'A' + 10); ++ else ++ break; ++ } ++ putc('\n'); ++ ++ if (ratio_parm == 0) ++ ratio_parm = tcte->ratio_parm; ++ ++ /* Preload the code in the cache */ ++ s = ((u32)&&start_fill) & ~(ic_lsize - 1); ++ e = (((u32)&&end_fill) + (ic_lsize - 1)) & ~(ic_lsize - 1); ++ while (s < e) { ++ cache_unroll(s, Fill); ++ s += ic_lsize; ++ } ++ ++ /* Copy the handler & preload it into the cache */ ++ s = (u32)&handler; ++ e = (u32)&afterhandler; ++ d = HANDLER_ADDR; ++ while (s < e) { ++ for (i = 0; i < ic_lsize; i += 4) { ++ *(long*)(d + i) = *(long *)(s + i); ++ } ++ cache_unroll(d, Fill); ++ s += ic_lsize; ++ d += ic_lsize; ++ } ++ ++ /* Clear BEV bit */ ++ clear_c0_status(ST0_BEV); ++ ++ /* enable interrupts */ ++ set_c0_status(IE_IRQ4 | IE_IRQ3 | IE_IRQ2 | IE_IRQ1 | IE_IRQ0 | ST0_IE); ++ /* enable timer interrupts */ ++ writel(1, &mipsr->intmask); ++ ++start_fill: ++ /* step 1, set clock ratios */ ++ write_c0_diag3(ratio_parm); ++ write_c0_diag1(8); ++ ++ /* step 2: program timer intr */ ++ writel(100, &mipsr->timer); ++ tmp = readl(&mipsr->timer); /* read it back to sync */ ++ ++ /* step 3, switch to async */ ++ write_c0_diag4(1 << 22); ++ ++ /* step 4, set cfg active */ ++ write_c0_diag2(0x9); ++ ++ /* steps 5 & 6 */ ++ __asm__ __volatile__(".set\tmips3\n\t" ++ "wait\n\t" ++ ".set\tmips0"); ++ ++ /* step 7, clear cfg_active */ ++ write_c0_diag2(0); ++ ++ /* step 8, fake soft reset */ ++ write_c0_diag5(read_c0_diag5() | 4); ++ } ++ ++ /* step 9 set watchdog timer */ ++ writel(20, &cc->watchdog); ++ tmp = readl(&cc->chipid); /* dummy read */ ++ ++ /* step 11 */ ++ __asm__ __volatile__(".set\tmips3\n\t" ++ "sync\n\t" ++ "wait\n\t" ++ ".set\tmips0"); ++ while (1); ++ } else { ++end_fill: ++nochange: ++ puts("\nNot changing clock. mips="); ++ putdec(target_mips_clock); ++ putc('/'); ++ putdec(target_sb_clock); ++ putc('\n'); ++ } ++ } else { ++ puts("Not a 4704, not changing clock\n"); ++ } ++} ++#endif ++ ++void ++c_main(unsigned long ra) ++{ ++ /* Disable interrupts */ ++ clear_c0_status(1); ++ ++ /* Scan backplane */ ++ sb_scan(); ++ ++// if (cc && usb && PHYSADDR(ra) >= 0x1fc00000) ++ reset_usb(cc, usb); ++ ++ ++ /* Determine chip ID and revision */ ++ if (cc) { ++ bcm_chipid = readl(&cc->chipid) & CID_ID_MASK; ++ bcm_chiprev = (readl(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT; ++ } ++ ++ /* Initialize UART */ ++ uart_init(115200); ++#if 0 ++ puts("\nSelf-booting Linux running on a "); ++ puthex(chipid); ++ puts(" Rev. "); ++ putdec(chiprev); ++ puts(" @ "); ++ putdec(mipsclock); ++ putc('/'); ++ putdec(sbclock); ++ putc('\n'); ++ ++ puts("CP0 PRID: 0x"); ++ puthex(read_c0_prid()); ++ putc('\n'); ++ puts("CP0 Conf: 0x"); ++ puthex(read_c0_conf()); ++ putc('\n'); ++ puts("CP0 Info: 0x"); ++ puthex(read_c0_info()); ++ putc('\n'); ++ puts("CP0 Status: 0x"); ++ puthex(read_c0_status()); ++ putc('\n'); ++ puts("CP0 Cause: 0x"); ++ puthex(read_c0_cause()); ++ putc('\n'); ++ puts("CP0 Config: 0x"); ++ puthex(read_c0_config()); ++ putc('\n'); ++ puts("CP0 Config1: 0x"); ++ puthex(read_c0_config1()); ++ putc('\n'); ++ if (mipscore == SB_MIPS33) ++ puts("CP0 Reg22: sel0/1/2/3/4/5:\n "); ++ else ++ puts("CP0 Reg22: 0x"); ++ puthex(read_c0_diag()); ++ if (mipscore == SB_MIPS33) { ++ puts("\n "); ++ puthex(read_c0_diag1()); ++ puts("\n "); ++ puthex(read_c0_diag2()); ++ puts("\n "); ++ puthex(read_c0_diag3()); ++ puts("\n "); ++ puthex(read_c0_diag4()); ++ puts("\n "); ++ puthex(read_c0_diag5()); ++ } ++ putc('\n'); ++ ++ if (memc) { ++ puts("memc config: 0x"); ++ puthex(readl(&memc->config)); ++ putc('\n'); ++ puts("memc mode: 0x"); ++ puthex(readl(&memc->modebuf)); ++ putc('\n'); ++ puts("memc wrncdl: 0x"); ++ puthex(readl(&memc->wrncdlcor)); ++ putc('\n'); ++ puts("memc rdncdl: 0x"); ++ puthex(readl(&memc->rdncdlcor)); ++ putc('\n'); ++ puts("memc miscdly: 0x"); ++ puthex(readl(&memc->miscdlyctl)); ++ putc('\n'); ++ puts("memc dqsgate: 0x"); ++ puthex(readl(&memc->dqsgatencdl)); ++ putc('\n'); ++ } ++#endif ++#if 0 ++ /* Switch back to sync */ ++ write_c0_diag4(0); ++#endif ++#if 1 ++#warning "Fix cache init " ++#else ++ /* Must be in KSEG1 to change cachability */ ++ cache_init(); ++ change_cachability = (void (*)(u32)) KSEG1ADDR((unsigned long)(_change_cachability)); ++ change_cachability(CONF_CM_CACHABLE_NONCOHERENT); ++ ++ /* Change clock if needed */ ++ change_clock(); ++ ++ /* Initialize serial flash */ ++ sflash = cc ? sflash_init(cc) : NULL; ++ ++ if (sflash) ++ puts("sflash set???"); ++ ++ /* Copy self to flash if we booted from SDRAM */ ++ if (PHYSADDR(ra) < 0x1fc00000) { ++ if (sflash) ++ sflash_self(cc); ++ } ++#endif ++ ++ /* Decompress kernel */ ++ decompress_kernel(); ++} +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/compressed/piggy.lnk linux-2.6.12.5-brcm/arch/mips/bcm47xx/compressed/piggy.lnk +--- linux-2.6.12.5/arch/mips/bcm47xx/compressed/piggy.lnk 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/compressed/piggy.lnk 2005-08-28 11:12:20.504847904 +0200 +@@ -0,0 +1 @@ ++SECTIONS { .data : { input_len = .; LONG(input_data_end - input_data) input_data = .; *(.data) input_data_end = .; }} +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/compressed/vmlinux.lds linux-2.6.12.5-brcm/arch/mips/bcm47xx/compressed/vmlinux.lds +--- linux-2.6.12.5/arch/mips/bcm47xx/compressed/vmlinux.lds 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/compressed/vmlinux.lds 2005-08-28 11:12:20.504847904 +0200 +@@ -0,0 +1,23 @@ ++OUTPUT_ARCH(mips) ++ENTRY(startup) ++SECTIONS { ++ . = 0x80500000 ; ++ .text : { ++ text_start = .; ++ *(.text) ++ *(.rodata) ++ text_end = .; ++ } ++ ++ .data : { ++ data_start = .; ++ *(.data) ++ data_end = .; ++ } ++ ++ .bss : { ++ bss_start = .; ++ *(.bss) ++ bss_end = .; ++ } ++} +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/compressed/vmlinux.lds.in linux-2.6.12.5-brcm/arch/mips/bcm47xx/compressed/vmlinux.lds.in +--- linux-2.6.12.5/arch/mips/bcm47xx/compressed/vmlinux.lds.in 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/compressed/vmlinux.lds.in 2005-08-28 11:12:20.504847904 +0200 +@@ -0,0 +1,23 @@ ++OUTPUT_ARCH(mips) ++ENTRY(startup) ++SECTIONS { ++ . = TEXT_START; ++ .text : { ++ text_start = .; ++ *(.text) ++ *(.rodata) ++ text_end = .; ++ } ++ ++ .data : { ++ data_start = .; ++ *(.data) ++ data_end = .; ++ } ++ ++ .bss : { ++ bss_start = .; ++ *(.bss) ++ bss_end = .; ++ } ++} +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/int-handler.S linux-2.6.12.5-brcm/arch/mips/bcm47xx/int-handler.S +--- linux-2.6.12.5/arch/mips/bcm47xx/int-handler.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/int-handler.S 2005-08-28 11:12:20.505847752 +0200 +@@ -0,0 +1,24 @@ ++#include <asm/asm.h> ++#include <asm/mipsregs.h> ++#include <asm/regdef.h> ++#include <asm/stackframe.h> ++ ++ .text ++ .set noreorder ++ .set noat ++ .align 5 ++ ++ NESTED(bcm47xx_irq_handler, PT_SIZE, sp) ++ SAVE_ALL ++ CLI ++ ++ .set at ++ .set noreorder ++ ++ jal bcm47xx_irq_dispatch ++ move a0, sp ++ ++ j ret_from_irq ++ nop ++ ++ END(bcm47xx_irq_handler) +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/irq.c linux-2.6.12.5-brcm/arch/mips/bcm47xx/irq.c +--- linux-2.6.12.5/arch/mips/bcm47xx/irq.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/irq.c 2005-08-28 11:12:20.505847752 +0200 +@@ -0,0 +1,52 @@ ++#include <linux/config.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/irq.h> ++#include <linux/module.h> ++#include <linux/smp.h> ++#include <linux/types.h> ++ ++#include <asm/cpu.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/irq_cpu.h> ++#include <asm/gdb-stub.h> ++ ++extern asmlinkage void bcm47xx_irq_handler(void); ++ ++void bcm47xx_irq_dispatch(struct pt_regs *regs) ++{ ++ u32 cause; ++ ++ cause = read_c0_cause() & read_c0_status() & CAUSEF_IP; ++ ++#ifdef CONFIG_KERNPROF ++ change_c0_status(cause | 1, 1); ++#else ++ clear_c0_status(cause); ++#endif ++ ++ if (cause & CAUSEF_IP7) ++ do_IRQ(7, regs); ++ if (cause & CAUSEF_IP2) ++ do_IRQ(2, regs); ++ if (cause & CAUSEF_IP3) ++ do_IRQ(3, regs); ++ if (cause & CAUSEF_IP4) ++ do_IRQ(4, regs); ++ if (cause & CAUSEF_IP5) ++ do_IRQ(5, regs); ++ if (cause & CAUSEF_IP6) ++ do_IRQ(6, regs); ++} ++ ++void __init arch_init_irq(void) ++{ ++ set_except_vector(0, bcm47xx_irq_handler); ++ mips_cpu_irq_init(0); ++ ++// printk("Breaking into debugger...\n"); ++// set_debug_traps(); ++// breakpoint(); ++} +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/prom.c linux-2.6.12.5-brcm/arch/mips/bcm47xx/prom.c +--- linux-2.6.12.5/arch/mips/bcm47xx/prom.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/prom.c 2005-08-28 11:12:20.505847752 +0200 +@@ -0,0 +1,35 @@ ++#include <linux/init.h> ++#include <linux/mm.h> ++#include <linux/sched.h> ++#include <linux/bootmem.h> ++ ++#include <asm/addrspace.h> ++#include <asm/bootinfo.h> ++#include <asm/pmon.h> ++ ++const char *get_system_type(void) ++{ ++ return "Broadcom BCM47xx"; ++} ++ ++void __init prom_init(void) ++{ ++ unsigned long mem; ++ ++ mips_machgroup = MACH_GROUP_BRCM; ++ mips_machtype = MACH_BCM47XX; ++ ++ /* Figure out memory size by finding aliases */ ++ for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) { ++ if (*(unsigned long *)((unsigned long)(prom_init) + mem) == ++ *(unsigned long *)(prom_init)) ++ break; ++ } ++ ++ add_memory_region(0, mem, BOOT_MEM_RAM); ++} ++ ++unsigned long __init prom_free_prom_memory(void) ++{ ++ return 0; ++} +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/setup.c linux-2.6.12.5-brcm/arch/mips/bcm47xx/setup.c +--- linux-2.6.12.5/arch/mips/bcm47xx/setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/setup.c 2005-08-28 11:12:20.506847600 +0200 +@@ -0,0 +1,111 @@ ++#include <linux/init.h> ++#include <linux/types.h> ++#include <linux/tty.h> ++#include <linux/serial.h> ++#include <linux/serial_core.h> ++#include <linux/serial_reg.h> ++#include <asm/time.h> ++#include <asm/reboot.h> ++ ++#include <typedefs.h> ++#include <sbutils.h> ++#include <sbmips.h> ++#include <sbpci.h> ++#include <sbconfig.h> ++#include <bcmdevs.h> ++ ++// #include <ssbcore.h> ++ ++#if 1 ++ ++//#define SER_PORT1(reg) (*((volatile unsigned char *)(0xbf800000+reg))) ++#define SER_PORT1(reg) (*((volatile unsigned char *)(0xb8000400+reg))) ++ ++int putDebugChar(char c) ++{ ++ while (!(SER_PORT1(UART_LSR) & UART_LSR_THRE)); ++ SER_PORT1(UART_TX) = c; ++ ++ return 1; ++} ++ ++char getDebugChar(void) ++{ ++ while (!(SER_PORT1(UART_LSR) & 1)); ++ return SER_PORT1(UART_RX); ++} ++ ++ ++static int ser_line = 0; ++ ++static void ++serial_add(void *regs, uint irq, uint baud_base, uint reg_shift) ++{ ++ struct uart_port s; ++ ++ memset(&s, 0, sizeof(s)); ++ ++ s.line = ser_line++; ++ s.membase = regs; ++ s.irq = irq + 2; ++ s.uartclk = baud_base; ++ //s.baud_base = baud_base / 16; ++ //s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | UPF_RESOURCES | ASYNC_AUTO_IRQ; ++ s.flags = ASYNC_BOOT_AUTOCONF; ++ s.iotype = SERIAL_IO_MEM; ++ s.regshift = reg_shift; ++ ++ if (early_serial_setup(&s) != 0) { ++ printk(KERN_ERR "Serial setup failed!\n"); ++ } ++} ++#endif ++ ++extern void bcm47xx_time_init(void); ++extern void bcm47xx_timer_setup(struct irqaction *irq); ++ ++void *nvram_get(char *foo) ++{ ++ return NULL; ++} ++ ++void *sbh; ++ ++static void bcm47xx_machine_restart(char *command) ++{ ++ /* Set the watchdog timer to reset immediately */ ++ cli(); ++ sb_watchdog(sbh, 1); ++ while (1); ++} ++ ++static void bcm47xx_machine_halt(void) ++{ ++ /* Disable interrupts and watchdog and spin forever */ ++ cli(); ++ sb_watchdog(sbh, 0); ++ while (1); ++} ++ ++//static struct sb_bus bus; ++ ++static int __init bcm47xx_init(void) ++{ ++// sb_bus_add(&bus, SB_BUS, (void *)SB_ENUM_BASE, SB_ENUM_LIM - SB_ENUM_BASE, "bcm47xx", NULL); ++ ++ sbh = sb_kattach(); ++ sb_mips_init(sbh); ++ sbpci_init(sbh); ++ sb_serial_init(sbh, serial_add); ++ ++ _machine_restart = bcm47xx_machine_restart; ++ _machine_halt = bcm47xx_machine_halt; ++ _machine_power_off = bcm47xx_machine_halt; ++ ++ board_time_init = bcm47xx_time_init; ++ board_timer_setup = bcm47xx_timer_setup; ++ ++ return 0; ++} ++ ++early_initcall(bcm47xx_init); +diff -Nur linux-2.6.12.5/arch/mips/bcm47xx/time.c linux-2.6.12.5-brcm/arch/mips/bcm47xx/time.c +--- linux-2.6.12.5/arch/mips/bcm47xx/time.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/bcm47xx/time.c 2005-08-28 11:12:20.506847600 +0200 +@@ -0,0 +1,74 @@ ++#include <linux/config.h> ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/sched.h> ++#include <linux/serial_reg.h> ++#include <linux/interrupt.h> ++#include <asm/addrspace.h> ++#include <asm/io.h> ++#include <asm/time.h> ++ ++//#include <typedefs.h> ++//#include <bcmnvram.h> ++//#include <sbconfig.h> ++//#include <sbextif.h> ++//#include <sbutils.h> ++ ++/* Global SB handle */ ++//extern void *bcm947xx_sbh; ++//extern spinlock_t bcm947xx_sbh_lock; ++ ++/* Convenience */ ++//#define sbh bcm947xx_sbh ++//#define sbh_lock bcm947xx_sbh_lock ++ ++//extern int panic_timeout; ++//static int watchdog = 0; ++//static u8 *mcr = NULL; ++ ++void __init ++bcm47xx_time_init(void) ++{ ++ unsigned int hz; ++// extifregs_t *eir; ++ ++ /* ++ * Use deterministic values for initial counter interrupt ++ * so that calibrate delay avoids encountering a counter wrap. ++ */ ++ write_c0_count(0); ++ write_c0_compare(0xffff); ++ ++// if (!(hz = sb_mips_clock(sbh))) ++// hz = 100000000; ++ hz = 200 * 1000 * 1000; ++ ++// printk("CPU: BCM%04x rev %d at %d MHz\n", sb_chip(sbh), sb_chiprev(sbh), ++// (hz + 500000) / 1000000); ++ ++ /* Set MIPS counter frequency for fixed_rate_gettimeoffset() */ ++ mips_hpt_frequency = hz / 2; ++ ++#if 0 ++ /* Set watchdog interval in ms */ ++ watchdog = simple_strtoul(nvram_safe_get("watchdog"), NULL, 0); ++ ++ /* Set panic timeout in seconds */ ++ panic_timeout = watchdog / 1000; ++ panic_timeout *= 10; ++ ++ /* Setup blink */ ++ if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) { ++ sbconfig_t *sb = (sbconfig_t *)((unsigned int) eir + SBCONFIGOFF); ++ unsigned long base = EXTIF_CFGIF_BASE(sb_base(readl(&sb->sbadmatch1))); ++ mcr = (u8 *) ioremap_nocache(base + UART_MCR, 1); ++ } ++#endif ++} ++ ++void __init ++bcm47xx_timer_setup(struct irqaction *irq) ++{ ++ /* Enable the timer interrupt */ ++ setup_irq(7, irq); ++} +diff -Nur linux-2.6.12.5/arch/mips/kernel/cpu-probe.c linux-2.6.12.5-brcm/arch/mips/kernel/cpu-probe.c +--- linux-2.6.12.5/arch/mips/kernel/cpu-probe.c 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/arch/mips/kernel/cpu-probe.c 2005-08-28 11:12:20.538842736 +0200 +@@ -555,6 +555,28 @@ + } + } + ++static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) ++{ ++ decode_config1(c); ++ switch (c->processor_id & 0xff00) { ++ case PRID_IMP_BCM3302: ++ c->cputype = CPU_BCM3302; ++ c->isa_level = MIPS_CPU_ISA_M32; ++ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | ++ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER; ++ break; ++ case PRID_IMP_BCM4710: ++ c->cputype = CPU_BCM4710; ++ c->isa_level = MIPS_CPU_ISA_M32; ++ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | ++ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER; ++ break; ++ default: ++ c->cputype = CPU_UNKNOWN; ++ break; ++ } ++} ++ + __init void cpu_probe(void) + { + struct cpuinfo_mips *c = ¤t_cpu_data; +@@ -577,7 +599,9 @@ + case PRID_COMP_SIBYTE: + cpu_probe_sibyte(c); + break; +- ++ case PRID_COMP_BROADCOM: ++ cpu_probe_broadcom(c); ++ break; + case PRID_COMP_SANDCRAFT: + cpu_probe_sandcraft(c); + break; +diff -Nur linux-2.6.12.5/arch/mips/kernel/head.S linux-2.6.12.5-brcm/arch/mips/kernel/head.S +--- linux-2.6.12.5/arch/mips/kernel/head.S 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/arch/mips/kernel/head.S 2005-08-28 11:12:20.539842584 +0200 +@@ -122,6 +122,14 @@ + #endif + .endm + ++#ifdef CONFIG_BCM4710 ++#undef eret ++#define eret nop; nop; eret ++#endif ++ ++ j kernel_entry ++ nop ++ + /* + * Reserved space for exception handlers. + * Necessary for machines which link their kernels at KSEG0. +diff -Nur linux-2.6.12.5/arch/mips/kernel/proc.c linux-2.6.12.5-brcm/arch/mips/kernel/proc.c +--- linux-2.6.12.5/arch/mips/kernel/proc.c 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/arch/mips/kernel/proc.c 2005-08-28 11:12:20.553840456 +0200 +@@ -75,7 +75,9 @@ + [CPU_VR4133] "NEC VR4133", + [CPU_VR4181] "NEC VR4181", + [CPU_VR4181A] "NEC VR4181A", +- [CPU_SR71000] "Sandcraft SR71000" ++ [CPU_SR71000] "Sandcraft SR71000", ++ [CPU_BCM3302] "Broadcom BCM3302", ++ [CPU_BCM4710] "Broadcom BCM4710" + }; + + +diff -Nur linux-2.6.12.5/arch/mips/mm/tlbex.c linux-2.6.12.5-brcm/arch/mips/mm/tlbex.c +--- linux-2.6.12.5/arch/mips/mm/tlbex.c 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/arch/mips/mm/tlbex.c 2005-08-28 11:12:20.587835288 +0200 +@@ -851,6 +851,8 @@ + case CPU_4KSC: + case CPU_20KC: + case CPU_25KF: ++ case CPU_BCM3302: ++ case CPU_BCM4710: + tlbw(p); + break; + +diff -Nur linux-2.6.12.5/arch/mips/pci/Makefile linux-2.6.12.5-brcm/arch/mips/pci/Makefile +--- linux-2.6.12.5/arch/mips/pci/Makefile 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/arch/mips/pci/Makefile 2005-08-28 11:12:20.611831640 +0200 +@@ -18,6 +18,7 @@ + obj-$(CONFIG_MIPS_TX3927) += ops-jmr3927.o + obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o + obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o ++obj-$(CONFIG_BCM47XX) += ops-sb.o fixup-bcm47xx.o pci-bcm47xx.o + + # + # These are still pretty much in the old state, watch, go blind. +diff -Nur linux-2.6.12.5/arch/mips/pci/fixup-bcm47xx.c linux-2.6.12.5-brcm/arch/mips/pci/fixup-bcm47xx.c +--- linux-2.6.12.5/arch/mips/pci/fixup-bcm47xx.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/pci/fixup-bcm47xx.c 2005-08-28 11:12:20.611831640 +0200 +@@ -0,0 +1,23 @@ ++#include <linux/init.h> ++#include <linux/pci.h> ++ ++/* Do platform specific device initialization at pci_enable_device() time */ ++int pcibios_plat_dev_init(struct pci_dev *dev) ++{ ++ return 0; ++} ++ ++int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ u8 irq; ++ ++ if (dev->bus->number == 1) ++ return 2; ++ ++ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); ++ return irq + 2; ++} ++ ++struct pci_fixup pcibios_fixups[] __initdata = { ++ { 0 } ++}; +diff -Nur linux-2.6.12.5/arch/mips/pci/ops-sb.c linux-2.6.12.5-brcm/arch/mips/pci/ops-sb.c +--- linux-2.6.12.5/arch/mips/pci/ops-sb.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/pci/ops-sb.c 2005-08-28 11:12:20.612831488 +0200 +@@ -0,0 +1,44 @@ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/pci.h> ++#include <linux/types.h> ++#include <asm/pci.h> ++ ++#include <typedefs.h> ++#include <sbpci.h> ++ ++extern void *sbh; ++//extern spinlock_t bcm47xx_sbh_lock; ++ ++static int ++sb_pci_read_config(struct pci_bus *bus, unsigned int devfn, ++ int reg, int size, u32 *val) ++{ ++ //unsigned long flags; ++ int ret; ++ ++ ++ //spin_lock_irqsave(&sbh_lock, flags); ++ ret = sbpci_read_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, val, size); ++ //spin_unlock_irqrestore(&sbh_lock, flags); ++ ++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++static int ++sb_pci_write_config(struct pci_bus *bus, unsigned int devfn, ++ int reg, int size, u32 val) ++{ ++// unsigned long flags; ++ int ret; ++ ++// spin_lock_irqsave(&sbh_lock, flags); ++ ret = sbpci_write_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, &val, size); ++// spin_unlock_irqrestore(&sbh_lock, flags); ++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++struct pci_ops sb_pci_ops = { ++ .read = sb_pci_read_config, ++ .write = sb_pci_write_config, ++}; +diff -Nur linux-2.6.12.5/arch/mips/pci/pci-bcm47xx.c linux-2.6.12.5-brcm/arch/mips/pci/pci-bcm47xx.c +--- linux-2.6.12.5/arch/mips/pci/pci-bcm47xx.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/arch/mips/pci/pci-bcm47xx.c 2005-08-28 11:12:20.612831488 +0200 +@@ -0,0 +1,61 @@ ++#include <linux/init.h> ++#include <linux/pci.h> ++#include <linux/types.h> ++ ++#include <asm/cpu.h> ++#include <asm/io.h> ++ ++#include <typedefs.h> ++#include <sbconfig.h> ++ ++extern struct pci_ops sb_pci_ops; ++ ++static struct resource sb_pci_mem_resource = { ++ .name = "SB PCI Memory resources", ++ .start = SB_ENUM_BASE, ++ .end = SB_ENUM_LIM - 1, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource sb_pci_io_resource = { ++ .name = "SB PCI I/O resources", ++ .start = 0x100, ++ .end = 0x1FF, ++ .flags = IORESOURCE_IO, ++}; ++ ++static struct pci_controller bcm47xx_sb_pci_controller = { ++ .pci_ops = &sb_pci_ops, ++ .mem_resource = &sb_pci_mem_resource, ++ .io_resource = &sb_pci_io_resource, ++}; ++ ++static struct resource ext_pci_mem_resource = { ++ .name = "Ext PCI Memory resources", ++ .start = SB_PCI_DMA, ++// .end = 0x7FFFFFFF, ++ .end = 0x40FFFFFF, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource ext_pci_io_resource = { ++ .name = "Ext PCI I/O resources", ++ .start = 0x200, ++ .end = 0x2FF, ++ .flags = IORESOURCE_IO, ++}; ++ ++static struct pci_controller bcm47xx_ext_pci_controller = { ++ .pci_ops = &sb_pci_ops, ++ .mem_resource = &ext_pci_mem_resource, ++ .io_resource = &ext_pci_io_resource, ++}; ++ ++static int __init bcm47xx_pci_init(void) ++{ ++ register_pci_controller(&bcm47xx_sb_pci_controller); ++ register_pci_controller(&bcm47xx_ext_pci_controller); ++ return 0; ++} ++ ++early_initcall(bcm47xx_pci_init); +diff -Nur linux-2.6.12.5/arch/mips/pci/pci.c linux-2.6.12.5-brcm/arch/mips/pci/pci.c +--- linux-2.6.12.5/arch/mips/pci/pci.c 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/arch/mips/pci/pci.c 2005-08-28 11:12:20.629828904 +0200 +@@ -238,7 +238,8 @@ + if (dev->resource[i].flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (dev->resource[i].flags & IORESOURCE_MEM) +- offset = hose->mem_offset; ++ offset = 0x26000000; ++ // offset = hose->mem_offset; + + dev->resource[i].start += offset; + dev->resource[i].end += offset; +diff -Nur linux-2.6.12.5/drivers/mtd/maps/Kconfig linux-2.6.12.5-brcm/drivers/mtd/maps/Kconfig +--- linux-2.6.12.5/drivers/mtd/maps/Kconfig 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/drivers/mtd/maps/Kconfig 2005-08-28 11:12:20.663823736 +0200 +@@ -357,6 +357,12 @@ + Mapping for the Flaga digital module. If you don't have one, ignore + this setting. + ++config MTD_BCM47XX ++ tristate "BCM47xx flash device" ++ depends on MIPS && MTD_CFI && BCM47XX ++ help ++ Support for the flash chips on the BCM47xx board. ++ + config MTD_BEECH + tristate "CFI Flash device mapped on IBM 405LP Beech" + depends on MTD_CFI && PPC32 && 40x && BEECH +diff -Nur linux-2.6.12.5/drivers/mtd/maps/Makefile linux-2.6.12.5-brcm/drivers/mtd/maps/Makefile +--- linux-2.6.12.5/drivers/mtd/maps/Makefile 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/drivers/mtd/maps/Makefile 2005-08-28 11:12:20.666823280 +0200 +@@ -31,6 +31,7 @@ + obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o + obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o + obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o ++obj-$(CONFIG_MTD_BCM47XX) += bcm47xx-flash.o + obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o + obj-$(CONFIG_MTD_IPAQ) += ipaq-flash.o + obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o +diff -Nur linux-2.6.12.5/drivers/mtd/maps/bcm47xx-flash.c linux-2.6.12.5-brcm/drivers/mtd/maps/bcm47xx-flash.c +--- linux-2.6.12.5/drivers/mtd/maps/bcm47xx-flash.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/drivers/mtd/maps/bcm47xx-flash.c 2005-08-28 11:12:20.666823280 +0200 +@@ -0,0 +1,132 @@ ++/* ++ * Flash mapping for BCM947XX boards ++ * ++ * Copyright (C) 2001 Broadcom Corporation ++ * ++ * $Id$ ++ */ ++ ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/kernel.h> ++#include <asm/io.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/map.h> ++#include <linux/mtd/partitions.h> ++#include <linux/config.h> ++ ++//#define WINDOW_ADDR 0x1fc00000 ++#define WINDOW_ADDR 0x1c000000 ++#define WINDOW_SIZE (0x400000*2) ++#define BUSWIDTH 2 ++ ++static struct mtd_info *bcm947xx_mtd; ++ ++static void bcm947xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) ++{ ++#define MIPS_MEMCPY_ALIGN 4 ++ map_word ret; ++ ssize_t transfer; ++ ssize_t done = 0; ++ if ((len >= MIPS_MEMCPY_ALIGN) && (!(from & (MIPS_MEMCPY_ALIGN - 1))) && (!(((unsigned int)to & (MIPS_MEMCPY_ALIGN - 1))))) { ++ done = len & ~(MIPS_MEMCPY_ALIGN - 1); ++ memcpy_fromio(to, map->virt + from, done); ++ } ++ while (done < len) { ++ ret = map->read(map, from + done); ++ transfer = len - done; ++ if (transfer > map->bankwidth) ++ transfer = map->bankwidth; ++ memcpy((void *)((unsigned long)to + done), &ret.x[0], transfer); ++ done += transfer; ++ } ++} ++ ++static struct map_info bcm947xx_map = { ++ name: "Physically mapped flash", ++ size: WINDOW_SIZE, ++ bankwidth: BUSWIDTH, ++ phys: WINDOW_ADDR, ++}; ++ ++#define SECTORS *64*1024 ++ ++#ifdef CONFIG_MTD_PARTITIONS ++#if 0 ++static struct mtd_partition bcm947xx_parts[] = { ++// 64 - 4 - 14 - 1 = 45 = 8 + 37 ++ { name: "pmon", offset: 0, size: 4 SECTORS, mask_flags: MTD_WRITEABLE }, ++ { name: "linux", offset: MTDPART_OFS_APPEND, size: 14 SECTORS }, ++ { name: "rescue", offset: MTDPART_OFS_APPEND, size: 8 SECTORS }, ++ { name: "rootfs", offset: MTDPART_OFS_APPEND, size: 37 SECTORS }, ++ { name: "nvram", offset: MTDPART_OFS_APPEND, size: 1 SECTORS, mask_flags: MTD_WRITEABLE }, ++}; ++#else ++static struct mtd_partition bcm947xx_parts[] = { ++ { name: "cfe", ++ offset: 0, ++ size: 384*1024, ++ mask_flags: MTD_WRITEABLE ++ }, ++ { name: "config", ++ offset: MTDPART_OFS_APPEND, ++ size: 128*1024 ++ }, ++ { name: "linux", ++ offset: MTDPART_OFS_APPEND, ++ size: 10*128*1024 ++ }, ++ { name: "jffs", ++ offset: MTDPART_OFS_APPEND, ++ size: (8*1024*1024)-((384*1024)+(128*1024)+(10*128*1024)+(128*1024)), ++ }, ++ { name: "nvram", ++ offset: MTDPART_OFS_APPEND, ++ size: 128*1024, ++ mask_flags: MTD_WRITEABLE ++ }, ++}; ++#endif ++#endif ++ ++int __init init_bcm947xx_map(void) ++{ ++ bcm947xx_map.virt = (unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE); ++ ++ if (!bcm947xx_map.virt) { ++ printk("Failed to ioremap\n"); ++ return -EIO; ++ } ++ simple_map_init(&bcm947xx_map); ++ ++ bcm947xx_map.copy_from = bcm947xx_map_copy_from; ++ ++ if (!(bcm947xx_mtd = do_map_probe("cfi_probe", &bcm947xx_map))) { ++ printk("Failed to do_map_probe\n"); ++ iounmap((void *)bcm947xx_map.virt); ++ return -ENXIO; ++ } ++ ++ bcm947xx_mtd->owner = THIS_MODULE; ++ ++ printk(KERN_NOTICE "flash device: %x at %x\n", bcm947xx_mtd->size, WINDOW_ADDR); ++ ++#ifdef CONFIG_MTD_PARTITIONS ++ return add_mtd_partitions(bcm947xx_mtd, bcm947xx_parts, sizeof(bcm947xx_parts)/sizeof(bcm947xx_parts[0])); ++#else ++ return 0; ++#endif ++} ++ ++void __exit cleanup_bcm947xx_map(void) ++{ ++#ifdef CONFIG_MTD_PARTITIONS ++ del_mtd_partitions(bcm947xx_mtd); ++#endif ++ map_destroy(bcm947xx_mtd); ++ iounmap((void *)bcm947xx_map.virt); ++} ++ ++module_init(init_bcm947xx_map); ++module_exit(cleanup_bcm947xx_map); +diff -Nur linux-2.6.12.5/drivers/net/b44.c linux-2.6.12.5-brcm/drivers/net/b44.c +--- linux-2.6.12.5/drivers/net/b44.c 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/drivers/net/b44.c 2005-08-28 11:12:20.691819480 +0200 +@@ -1,7 +1,8 @@ +-/* b44.c: Broadcom 4400 device driver. ++/* b44.c: Broadcom 4400/47xx device driver. + * + * Copyright (C) 2002 David S. Miller (davem@redhat.com) +- * Fixed by Pekka Pietikainen (pp@ee.oulu.fi) ++ * Copyright (C) 2004 Pekka Pietikainen (pp@ee.oulu.fi) ++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) + * + * Distribute under GPL. + */ +@@ -78,7 +79,7 @@ + DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; + + MODULE_AUTHOR("Florian Schirmer, Pekka Pietikainen, David S. Miller"); +-MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver"); ++MODULE_DESCRIPTION("Broadcom 4400/47xx 10/100 PCI ethernet driver"); + MODULE_LICENSE("GPL"); + MODULE_VERSION(DRV_MODULE_VERSION); + +@@ -93,6 +94,8 @@ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, ++ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4713, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + { } /* terminate list with empty entry */ + }; + +@@ -106,24 +109,13 @@ + static void b44_poll_controller(struct net_device *dev); + #endif + +-static inline unsigned long br32(const struct b44 *bp, unsigned long reg) +-{ +- return readl(bp->regs + reg); +-} +- +-static inline void bw32(const struct b44 *bp, +- unsigned long reg, unsigned long val) +-{ +- writel(val, bp->regs + reg); +-} +- + static int b44_wait_bit(struct b44 *bp, unsigned long reg, + u32 bit, unsigned long timeout, const int clear) + { + unsigned long i; + + for (i = 0; i < timeout; i++) { +- u32 val = br32(bp, reg); ++ u32 val = br32(reg); + + if (clear && !(val & bit)) + break; +@@ -154,7 +146,7 @@ + + static u32 ssb_get_core_rev(struct b44 *bp) + { +- return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK); ++ return (br32(B44_SBIDHIGH) & SBIDHIGH_RC_MASK); + } + + static u32 ssb_pci_setup(struct b44 *bp, u32 cores) +@@ -165,13 +157,13 @@ + pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, BCM4400_PCI_CORE_ADDR); + pci_rev = ssb_get_core_rev(bp); + +- val = br32(bp, B44_SBINTVEC); ++ val = br32(B44_SBINTVEC); + val |= cores; +- bw32(bp, B44_SBINTVEC, val); ++ bw32(B44_SBINTVEC, val); + +- val = br32(bp, SSB_PCI_TRANS_2); ++ val = br32(SSB_PCI_TRANS_2); + val |= SSB_PCI_PREF | SSB_PCI_BURST; +- bw32(bp, SSB_PCI_TRANS_2, val); ++ bw32(SSB_PCI_TRANS_2, val); + + pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, bar_orig); + +@@ -180,18 +172,18 @@ + + static void ssb_core_disable(struct b44 *bp) + { +- if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET) ++ if (br32(B44_SBTMSLOW) & SBTMSLOW_RESET) + return; + +- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK)); ++ bw32(B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK)); + b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0); + b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1); +- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK | ++ bw32(B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK | + SBTMSLOW_REJECT | SBTMSLOW_RESET)); +- br32(bp, B44_SBTMSLOW); ++ br32(B44_SBTMSLOW); + udelay(1); +- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET)); +- br32(bp, B44_SBTMSLOW); ++ bw32(B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET)); ++ br32(B44_SBTMSLOW); + udelay(1); + } + +@@ -200,58 +192,65 @@ + u32 val; + + ssb_core_disable(bp); +- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC)); +- br32(bp, B44_SBTMSLOW); ++ bw32(B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC)); ++ br32(B44_SBTMSLOW); + udelay(1); + + /* Clear SERR if set, this is a hw bug workaround. */ +- if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR) +- bw32(bp, B44_SBTMSHIGH, 0); ++ if (br32(B44_SBTMSHIGH) & SBTMSHIGH_SERR) ++ bw32(B44_SBTMSHIGH, 0); + +- val = br32(bp, B44_SBIMSTATE); ++ val = br32(B44_SBIMSTATE); + if (val & (SBIMSTATE_IBE | SBIMSTATE_TO)) +- bw32(bp, B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO)); ++ bw32(B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO)); + +- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC)); +- br32(bp, B44_SBTMSLOW); ++ bw32(B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC)); ++ br32(B44_SBTMSLOW); + udelay(1); + +- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK)); +- br32(bp, B44_SBTMSLOW); ++ bw32(B44_SBTMSLOW, (SBTMSLOW_CLOCK)); ++ br32(B44_SBTMSLOW); + udelay(1); + } + ++static int b44_4713_instance; ++ + static int ssb_core_unit(struct b44 *bp) + { +-#if 0 +- u32 val = br32(bp, B44_SBADMATCH0); +- u32 base; +- +- type = val & SBADMATCH0_TYPE_MASK; +- switch (type) { +- case 0: +- base = val & SBADMATCH0_BS0_MASK; +- break; +- +- case 1: +- base = val & SBADMATCH0_BS1_MASK; +- break; +- +- case 2: +- default: +- base = val & SBADMATCH0_BS2_MASK; +- break; +- }; +-#endif +- return 0; ++ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) ++ return b44_4713_instance++; ++ else ++ return 0; + } + + static int ssb_is_core_up(struct b44 *bp) + { +- return ((br32(bp, B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK)) ++ return ((br32(B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK)) + == SBTMSLOW_CLOCK); + } + ++static void __b44_cam_read(struct b44 *bp, unsigned char *data, int index) ++{ ++ u32 val; ++ ++ bw32(B44_CAM_CTRL, (CAM_CTRL_READ | ++ (index << CAM_CTRL_INDEX_SHIFT))); ++ ++ b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1); ++ ++ val = br32(B44_CAM_DATA_LO); ++ ++ data[2] = (val >> 24) & 0xFF; ++ data[3] = (val >> 16) & 0xFF; ++ data[4] = (val >> 8) & 0xFF; ++ data[5] = (val >> 0) & 0xFF; ++ ++ val = br32(B44_CAM_DATA_HI); ++ ++ data[0] = (val >> 8) & 0xFF; ++ data[1] = (val >> 0) & 0xFF; ++} ++ + static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index) + { + u32 val; +@@ -260,19 +259,19 @@ + val |= ((u32) data[3]) << 16; + val |= ((u32) data[4]) << 8; + val |= ((u32) data[5]) << 0; +- bw32(bp, B44_CAM_DATA_LO, val); ++ bw32(B44_CAM_DATA_LO, val); + val = (CAM_DATA_HI_VALID | + (((u32) data[0]) << 8) | + (((u32) data[1]) << 0)); +- bw32(bp, B44_CAM_DATA_HI, val); +- bw32(bp, B44_CAM_CTRL, (CAM_CTRL_WRITE | ++ bw32(B44_CAM_DATA_HI, val); ++ bw32(B44_CAM_CTRL, (CAM_CTRL_WRITE | + (index << CAM_CTRL_INDEX_SHIFT))); + b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1); + } + + static inline void __b44_disable_ints(struct b44 *bp) + { +- bw32(bp, B44_IMASK, 0); ++ bw32(B44_IMASK, 0); + } + + static void b44_disable_ints(struct b44 *bp) +@@ -280,34 +279,40 @@ + __b44_disable_ints(bp); + + /* Flush posted writes. */ +- br32(bp, B44_IMASK); ++ br32(B44_IMASK); + } + + static void b44_enable_ints(struct b44 *bp) + { +- bw32(bp, B44_IMASK, bp->imask); ++ bw32(B44_IMASK, bp->imask); + } + + static int b44_readphy(struct b44 *bp, int reg, u32 *val) + { + int err; + +- bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); +- bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | ++ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) ++ return 0; ++ ++ bw32(B44_EMAC_ISTAT, EMAC_INT_MII); ++ bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START | + (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) | + (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | + (reg << MDIO_DATA_RA_SHIFT) | + (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT))); + err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); +- *val = br32(bp, B44_MDIO_DATA) & MDIO_DATA_DATA; ++ *val = br32(B44_MDIO_DATA) & MDIO_DATA_DATA; + + return err; + } + + static int b44_writephy(struct b44 *bp, int reg, u32 val) + { +- bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); +- bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | ++ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) ++ return 0; ++ ++ bw32(B44_EMAC_ISTAT, EMAC_INT_MII); ++ bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START | + (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) | + (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | + (reg << MDIO_DATA_RA_SHIFT) | +@@ -344,6 +349,9 @@ + u32 val; + int err; + ++ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) ++ return 0; ++ + err = b44_writephy(bp, MII_BMCR, BMCR_RESET); + if (err) + return err; +@@ -367,20 +375,20 @@ + bp->flags &= ~(B44_FLAG_TX_PAUSE | B44_FLAG_RX_PAUSE); + bp->flags |= pause_flags; + +- val = br32(bp, B44_RXCONFIG); ++ val = br32(B44_RXCONFIG); + if (pause_flags & B44_FLAG_RX_PAUSE) + val |= RXCONFIG_FLOW; + else + val &= ~RXCONFIG_FLOW; +- bw32(bp, B44_RXCONFIG, val); ++ bw32(B44_RXCONFIG, val); + +- val = br32(bp, B44_MAC_FLOW); ++ val = br32(B44_MAC_FLOW); + if (pause_flags & B44_FLAG_TX_PAUSE) + val |= (MAC_FLOW_PAUSE_ENAB | + (0xc0 & MAC_FLOW_RX_HI_WATER)); + else + val &= ~MAC_FLOW_PAUSE_ENAB; +- bw32(bp, B44_MAC_FLOW, val); ++ bw32(B44_MAC_FLOW, val); + } + + static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote) +@@ -414,6 +422,9 @@ + u32 val; + int err; + ++ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) ++ return 0; ++ + if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0) + goto out; + if ((err = b44_writephy(bp, B44_MII_ALEDCTRL, +@@ -476,11 +487,11 @@ + + val = &bp->hw_stats.tx_good_octets; + for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) { +- *val++ += br32(bp, reg); ++ *val++ += br32(reg); + } + val = &bp->hw_stats.rx_good_octets; + for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) { +- *val++ += br32(bp, reg); ++ *val++ += br32(reg); + } + } + +@@ -506,6 +517,19 @@ + { + u32 bmsr, aux; + ++ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) { ++ bp->flags |= B44_FLAG_100_BASE_T; ++ bp->flags |= B44_FLAG_FULL_DUPLEX; ++ if (!netif_carrier_ok(bp->dev)) { ++ u32 val = br32(B44_TX_CTRL); ++ val |= TX_CTRL_DUPLEX; ++ bw32(B44_TX_CTRL, val); ++ netif_carrier_on(bp->dev); ++ b44_link_report(bp); ++ } ++ return; ++ } ++ + if (!b44_readphy(bp, MII_BMSR, &bmsr) && + !b44_readphy(bp, B44_MII_AUXCTRL, &aux) && + (bmsr != 0xffff)) { +@@ -520,14 +544,14 @@ + + if (!netif_carrier_ok(bp->dev) && + (bmsr & BMSR_LSTATUS)) { +- u32 val = br32(bp, B44_TX_CTRL); ++ u32 val = br32(B44_TX_CTRL); + u32 local_adv, remote_adv; + + if (bp->flags & B44_FLAG_FULL_DUPLEX) + val |= TX_CTRL_DUPLEX; + else + val &= ~TX_CTRL_DUPLEX; +- bw32(bp, B44_TX_CTRL, val); ++ bw32(B44_TX_CTRL, val); + + if (!(bp->flags & B44_FLAG_FORCE_LINK) && + !b44_readphy(bp, MII_ADVERTISE, &local_adv) && +@@ -572,7 +596,7 @@ + { + u32 cur, cons; + +- cur = br32(bp, B44_DMATX_STAT) & DMATX_STAT_CDMASK; ++ cur = br32(B44_DMATX_STAT) & DMATX_STAT_CDMASK; + cur /= sizeof(struct dma_desc); + + /* XXX needs updating when NETIF_F_SG is supported */ +@@ -596,7 +620,7 @@ + TX_BUFFS_AVAIL(bp) > B44_TX_WAKEUP_THRESH) + netif_wake_queue(bp->dev); + +- bw32(bp, B44_GPTIMER, 0); ++ bw32(B44_GPTIMER, 0); + } + + /* Works like this. This chip writes a 'struct rx_header" 30 bytes +@@ -713,7 +737,7 @@ + u32 cons, prod; + + received = 0; +- prod = br32(bp, B44_DMARX_STAT) & DMARX_STAT_CDMASK; ++ prod = br32(B44_DMARX_STAT) & DMARX_STAT_CDMASK; + prod /= sizeof(struct dma_desc); + cons = bp->rx_cons; + +@@ -792,7 +816,7 @@ + } + + bp->rx_cons = cons; +- bw32(bp, B44_DMARX_PTR, cons * sizeof(struct dma_desc)); ++ bw32(B44_DMARX_PTR, cons * sizeof(struct dma_desc)); + + return received; + } +@@ -856,8 +880,8 @@ + + spin_lock_irqsave(&bp->lock, flags); + +- istat = br32(bp, B44_ISTAT); +- imask = br32(bp, B44_IMASK); ++ istat = br32(B44_ISTAT); ++ imask = br32(B44_IMASK); + + /* ??? What the fuck is the purpose of the interrupt mask + * ??? register if we have to mask it out by hand anyways? +@@ -877,8 +901,8 @@ + dev->name); + } + +- bw32(bp, B44_ISTAT, istat); +- br32(bp, B44_ISTAT); ++ bw32(B44_ISTAT, istat); ++ br32(B44_ISTAT); + } + spin_unlock_irqrestore(&bp->lock, flags); + return IRQ_RETVAL(handled); +@@ -965,11 +989,11 @@ + + wmb(); + +- bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc)); ++ bw32(B44_DMATX_PTR, entry * sizeof(struct dma_desc)); + if (bp->flags & B44_FLAG_BUGGY_TXPTR) +- bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc)); ++ bw32(B44_DMATX_PTR, entry * sizeof(struct dma_desc)); + if (bp->flags & B44_FLAG_REORDER_BUG) +- br32(bp, B44_DMATX_PTR); ++ br32(B44_DMATX_PTR); + + if (TX_BUFFS_AVAIL(bp) < 1) + netif_stop_queue(dev); +@@ -1137,32 +1161,35 @@ + { + unsigned long reg; + +- bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); ++ bw32(B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); + for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) +- br32(bp, reg); ++ br32(reg); + for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) +- br32(bp, reg); ++ br32(reg); + } + + /* bp->lock is held. */ + static void b44_chip_reset(struct b44 *bp) + { ++ unsigned int sb_clock; ++ + if (ssb_is_core_up(bp)) { +- bw32(bp, B44_RCV_LAZY, 0); +- bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE); ++ bw32(B44_RCV_LAZY, 0); ++ bw32(B44_ENET_CTRL, ENET_CTRL_DISABLE); + b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 100, 1); +- bw32(bp, B44_DMATX_CTRL, 0); ++ bw32(B44_DMATX_CTRL, 0); + bp->tx_prod = bp->tx_cons = 0; +- if (br32(bp, B44_DMARX_STAT) & DMARX_STAT_EMASK) { ++ if (br32(B44_DMARX_STAT) & DMARX_STAT_EMASK) { + b44_wait_bit(bp, B44_DMARX_STAT, DMARX_STAT_SIDLE, + 100, 0); + } +- bw32(bp, B44_DMARX_CTRL, 0); ++ bw32(B44_DMARX_CTRL, 0); + bp->rx_prod = bp->rx_cons = 0; + } else { +- ssb_pci_setup(bp, (bp->core_unit == 0 ? +- SBINTVEC_ENET0 : +- SBINTVEC_ENET1)); ++ if (bp->pdev->device != PCI_DEVICE_ID_BCM4713) ++ ssb_pci_setup(bp, (bp->core_unit == 0 ? ++ SBINTVEC_ENET0 : ++ SBINTVEC_ENET1)); + } + + ssb_core_reset(bp); +@@ -1170,20 +1197,26 @@ + b44_clear_stats(bp); + + /* Make PHY accessible. */ +- bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | +- (0x0d & MDIO_CTRL_MAXF_MASK))); +- br32(bp, B44_MDIO_CTRL); +- +- if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) { +- bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL); +- br32(bp, B44_ENET_CTRL); ++ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) ++ sb_clock = 100000000; /* 100 MHz */ ++ else ++ sb_clock = 62500000; /* 62.5 MHz */ ++ ++ bw32(B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | ++ (((sb_clock + (B44_MDC_RATIO / 2)) / B44_MDC_RATIO) ++ & MDIO_CTRL_MAXF_MASK))); ++ br32(B44_MDIO_CTRL); ++ ++ if (!(br32(B44_DEVCTRL) & DEVCTRL_IPP)) { ++ bw32(B44_ENET_CTRL, ENET_CTRL_EPSEL); ++ br32(B44_ENET_CTRL); + bp->flags &= ~B44_FLAG_INTERNAL_PHY; + } else { +- u32 val = br32(bp, B44_DEVCTRL); ++ u32 val = br32(B44_DEVCTRL); + + if (val & DEVCTRL_EPR) { +- bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR)); +- br32(bp, B44_DEVCTRL); ++ bw32(B44_DEVCTRL, (val & ~DEVCTRL_EPR)); ++ br32(B44_DEVCTRL); + udelay(100); + } + bp->flags |= B44_FLAG_INTERNAL_PHY; +@@ -1200,13 +1233,13 @@ + /* bp->lock is held. */ + static void __b44_set_mac_addr(struct b44 *bp) + { +- bw32(bp, B44_CAM_CTRL, 0); ++ bw32(B44_CAM_CTRL, 0); + if (!(bp->dev->flags & IFF_PROMISC)) { + u32 val; + + __b44_cam_write(bp, bp->dev->dev_addr, 0); +- val = br32(bp, B44_CAM_CTRL); +- bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE); ++ val = br32(B44_CAM_CTRL); ++ bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE); + } + } + +@@ -1240,30 +1273,30 @@ + b44_setup_phy(bp); + + /* Enable CRC32, set proper LED modes and power on PHY */ +- bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL); +- bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT)); ++ bw32(B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL); ++ bw32(B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT)); + + /* This sets the MAC address too. */ + __b44_set_rx_mode(bp->dev); + + /* MTU + eth header + possible VLAN tag + struct rx_header */ +- bw32(bp, B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); +- bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); ++ bw32(B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); ++ bw32(B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); + +- bw32(bp, B44_TX_WMARK, 56); /* XXX magic */ +- bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE); +- bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset); +- bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE | ++ bw32(B44_TX_WMARK, 56); /* XXX magic */ ++ bw32(B44_DMATX_CTRL, DMATX_CTRL_ENABLE); ++ bw32(B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset); ++ bw32(B44_DMARX_CTRL, (DMARX_CTRL_ENABLE | + (bp->rx_offset << DMARX_CTRL_ROSHIFT))); +- bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset); ++ bw32(B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset); + +- bw32(bp, B44_DMARX_PTR, bp->rx_pending); ++ bw32(B44_DMARX_PTR, bp->rx_pending); + bp->rx_prod = bp->rx_pending; + +- bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); ++ bw32(B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); + +- val = br32(bp, B44_ENET_CTRL); +- bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE)); ++ val = br32(B44_ENET_CTRL); ++ bw32(B44_ENET_CTRL, (val | ENET_CTRL_ENABLE)); + } + + static int b44_open(struct net_device *dev) +@@ -1416,11 +1449,11 @@ + int i=0; + unsigned char zero[6] = {0,0,0,0,0,0}; + +- val = br32(bp, B44_RXCONFIG); ++ val = br32(B44_RXCONFIG); + val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI); + if (dev->flags & IFF_PROMISC) { + val |= RXCONFIG_PROMISC; +- bw32(bp, B44_RXCONFIG, val); ++ bw32(B44_RXCONFIG, val); + } else { + __b44_set_mac_addr(bp); + +@@ -1432,9 +1465,9 @@ + for(;i<64;i++) { + __b44_cam_write(bp, zero, i); + } +- bw32(bp, B44_RXCONFIG, val); +- val = br32(bp, B44_CAM_CTRL); +- bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE); ++ bw32(B44_RXCONFIG, val); ++ val = br32(B44_CAM_CTRL); ++ bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE); + } + } + +@@ -1704,19 +1737,41 @@ + { + u8 eeprom[128]; + int err; ++ unsigned long flags; + +- err = b44_read_eeprom(bp, &eeprom[0]); +- if (err) +- goto out; +- +- bp->dev->dev_addr[0] = eeprom[79]; +- bp->dev->dev_addr[1] = eeprom[78]; +- bp->dev->dev_addr[2] = eeprom[81]; +- bp->dev->dev_addr[3] = eeprom[80]; +- bp->dev->dev_addr[4] = eeprom[83]; +- bp->dev->dev_addr[5] = eeprom[82]; +- +- bp->phy_addr = eeprom[90] & 0x1f; ++ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) { ++ /* ++ * BCM47xx boards don't have a EEPROM. The MAC is stored in ++ * a NVRAM area somewhere in the flash memory. As we don't ++ * know the location and/or the format of the NVRAM area ++ * here, we simply rely on the bootloader to write the ++ * MAC into the CAM. ++ */ ++ spin_lock_irqsave(&bp->lock, flags); ++ __b44_cam_read(bp, bp->dev->dev_addr, 0); ++ spin_unlock_irqrestore(&bp->lock, flags); ++ ++ /* ++ * BCM47xx boards don't have a PHY. Usually there is a switch ++ * chip with multiple PHYs connected to the PHY port. ++ */ ++ bp->phy_addr = B44_PHY_ADDR_NO_PHY; ++ bp->dma_offset = 0; ++ } else { ++ err = b44_read_eeprom(bp, &eeprom[0]); ++ if (err) ++ return err; ++ ++ bp->dev->dev_addr[0] = eeprom[79]; ++ bp->dev->dev_addr[1] = eeprom[78]; ++ bp->dev->dev_addr[2] = eeprom[81]; ++ bp->dev->dev_addr[3] = eeprom[80]; ++ bp->dev->dev_addr[4] = eeprom[83]; ++ bp->dev->dev_addr[5] = eeprom[82]; ++ ++ bp->phy_addr = eeprom[90] & 0x1f; ++ bp->dma_offset = SB_PCI_DMA; ++ } + + /* With this, plus the rx_header prepended to the data by the + * hardware, we'll land the ethernet header on a 2-byte boundary. +@@ -1726,13 +1781,12 @@ + bp->imask = IMASK_DEF; + + bp->core_unit = ssb_core_unit(bp); +- bp->dma_offset = SB_PCI_DMA; + + /* XXX - really required? + bp->flags |= B44_FLAG_BUGGY_TXPTR; + */ +-out: +- return err; ++ ++ return 0; + } + + static int __devinit b44_init_one(struct pci_dev *pdev, +@@ -1810,7 +1864,7 @@ + + spin_lock_init(&bp->lock); + +- bp->regs = ioremap(b44reg_base, b44reg_len); ++ bp->regs = (unsigned long) ioremap(b44reg_base, b44reg_len); + if (bp->regs == 0UL) { + printk(KERN_ERR PFX "Cannot map device registers, " + "aborting.\n"); +@@ -1871,7 +1925,8 @@ + + pci_save_state(bp->pdev); + +- printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name); ++ printk(KERN_INFO "%s: Broadcom %s 10/100BaseT Ethernet ", dev->name, ++ (pdev->device == PCI_DEVICE_ID_BCM4713) ? "47xx" : "4400"); + for (i = 0; i < 6; i++) + printk("%2.2x%c", dev->dev_addr[i], + i == 5 ? '\n' : ':'); +@@ -1879,7 +1934,7 @@ + return 0; + + err_out_iounmap: +- iounmap(bp->regs); ++ iounmap((void *) bp->regs); + + err_out_free_dev: + free_netdev(dev); +@@ -1901,7 +1956,7 @@ + struct b44 *bp = netdev_priv(dev); + + unregister_netdev(dev); +- iounmap(bp->regs); ++ iounmap((void *) bp->regs); + free_netdev(dev); + pci_release_regions(pdev); + pci_disable_device(pdev); +diff -Nur linux-2.6.12.5/drivers/net/b44.c.orig linux-2.6.12.5-brcm/drivers/net/b44.c.orig +--- linux-2.6.12.5/drivers/net/b44.c.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/drivers/net/b44.c.orig 2005-08-15 02:20:18.000000000 +0200 +@@ -0,0 +1,1978 @@ ++/* b44.c: Broadcom 4400 device driver. ++ * ++ * Copyright (C) 2002 David S. Miller (davem@redhat.com) ++ * Fixed by Pekka Pietikainen (pp@ee.oulu.fi) ++ * ++ * Distribute under GPL. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/types.h> ++#include <linux/netdevice.h> ++#include <linux/ethtool.h> ++#include <linux/mii.h> ++#include <linux/if_ether.h> ++#include <linux/etherdevice.h> ++#include <linux/pci.h> ++#include <linux/delay.h> ++#include <linux/init.h> ++#include <linux/version.h> ++ ++#include <asm/uaccess.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++ ++#include "b44.h" ++ ++#define DRV_MODULE_NAME "b44" ++#define PFX DRV_MODULE_NAME ": " ++#define DRV_MODULE_VERSION "0.95" ++#define DRV_MODULE_RELDATE "Aug 3, 2004" ++ ++#define B44_DEF_MSG_ENABLE \ ++ (NETIF_MSG_DRV | \ ++ NETIF_MSG_PROBE | \ ++ NETIF_MSG_LINK | \ ++ NETIF_MSG_TIMER | \ ++ NETIF_MSG_IFDOWN | \ ++ NETIF_MSG_IFUP | \ ++ NETIF_MSG_RX_ERR | \ ++ NETIF_MSG_TX_ERR) ++ ++/* length of time before we decide the hardware is borked, ++ * and dev->tx_timeout() should be called to fix the problem ++ */ ++#define B44_TX_TIMEOUT (5 * HZ) ++ ++/* hardware minimum and maximum for a single frame's data payload */ ++#define B44_MIN_MTU 60 ++#define B44_MAX_MTU 1500 ++ ++#define B44_RX_RING_SIZE 512 ++#define B44_DEF_RX_RING_PENDING 200 ++#define B44_RX_RING_BYTES (sizeof(struct dma_desc) * \ ++ B44_RX_RING_SIZE) ++#define B44_TX_RING_SIZE 512 ++#define B44_DEF_TX_RING_PENDING (B44_TX_RING_SIZE - 1) ++#define B44_TX_RING_BYTES (sizeof(struct dma_desc) * \ ++ B44_TX_RING_SIZE) ++#define B44_DMA_MASK 0x3fffffff ++ ++#define TX_RING_GAP(BP) \ ++ (B44_TX_RING_SIZE - (BP)->tx_pending) ++#define TX_BUFFS_AVAIL(BP) \ ++ (((BP)->tx_cons <= (BP)->tx_prod) ? \ ++ (BP)->tx_cons + (BP)->tx_pending - (BP)->tx_prod : \ ++ (BP)->tx_cons - (BP)->tx_prod - TX_RING_GAP(BP)) ++#define NEXT_TX(N) (((N) + 1) & (B44_TX_RING_SIZE - 1)) ++ ++#define RX_PKT_BUF_SZ (1536 + bp->rx_offset + 64) ++#define TX_PKT_BUF_SZ (B44_MAX_MTU + ETH_HLEN + 8) ++ ++/* minimum number of free TX descriptors required to wake up TX process */ ++#define B44_TX_WAKEUP_THRESH (B44_TX_RING_SIZE / 4) ++ ++static char version[] __devinitdata = ++ DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; ++ ++MODULE_AUTHOR("Florian Schirmer, Pekka Pietikainen, David S. Miller"); ++MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver"); ++MODULE_LICENSE("GPL"); ++MODULE_VERSION(DRV_MODULE_VERSION); ++ ++static int b44_debug = -1; /* -1 == use B44_DEF_MSG_ENABLE as value */ ++module_param(b44_debug, int, 0); ++MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value"); ++ ++static struct pci_device_id b44_pci_tbl[] = { ++ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, ++ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B0, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, ++ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, ++ { } /* terminate list with empty entry */ ++}; ++ ++MODULE_DEVICE_TABLE(pci, b44_pci_tbl); ++ ++static void b44_halt(struct b44 *); ++static void b44_init_rings(struct b44 *); ++static void b44_init_hw(struct b44 *); ++static int b44_poll(struct net_device *dev, int *budget); ++#ifdef CONFIG_NET_POLL_CONTROLLER ++static void b44_poll_controller(struct net_device *dev); ++#endif ++ ++static inline unsigned long br32(const struct b44 *bp, unsigned long reg) ++{ ++ return readl(bp->regs + reg); ++} ++ ++static inline void bw32(const struct b44 *bp, ++ unsigned long reg, unsigned long val) ++{ ++ writel(val, bp->regs + reg); ++} ++ ++static int b44_wait_bit(struct b44 *bp, unsigned long reg, ++ u32 bit, unsigned long timeout, const int clear) ++{ ++ unsigned long i; ++ ++ for (i = 0; i < timeout; i++) { ++ u32 val = br32(bp, reg); ++ ++ if (clear && !(val & bit)) ++ break; ++ if (!clear && (val & bit)) ++ break; ++ udelay(10); ++ } ++ if (i == timeout) { ++ printk(KERN_ERR PFX "%s: BUG! Timeout waiting for bit %08x of register " ++ "%lx to %s.\n", ++ bp->dev->name, ++ bit, reg, ++ (clear ? "clear" : "set")); ++ return -ENODEV; ++ } ++ return 0; ++} ++ ++/* Sonics SiliconBackplane support routines. ROFL, you should see all the ++ * buzz words used on this company's website :-) ++ * ++ * All of these routines must be invoked with bp->lock held and ++ * interrupts disabled. ++ */ ++ ++#define SB_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ ++#define BCM4400_PCI_CORE_ADDR 0x18002000 /* Address of PCI core on BCM4400 cards */ ++ ++static u32 ssb_get_core_rev(struct b44 *bp) ++{ ++ return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK); ++} ++ ++static u32 ssb_pci_setup(struct b44 *bp, u32 cores) ++{ ++ u32 bar_orig, pci_rev, val; ++ ++ pci_read_config_dword(bp->pdev, SSB_BAR0_WIN, &bar_orig); ++ pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, BCM4400_PCI_CORE_ADDR); ++ pci_rev = ssb_get_core_rev(bp); ++ ++ val = br32(bp, B44_SBINTVEC); ++ val |= cores; ++ bw32(bp, B44_SBINTVEC, val); ++ ++ val = br32(bp, SSB_PCI_TRANS_2); ++ val |= SSB_PCI_PREF | SSB_PCI_BURST; ++ bw32(bp, SSB_PCI_TRANS_2, val); ++ ++ pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, bar_orig); ++ ++ return pci_rev; ++} ++ ++static void ssb_core_disable(struct b44 *bp) ++{ ++ if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET) ++ return; ++ ++ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK)); ++ b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0); ++ b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1); ++ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK | ++ SBTMSLOW_REJECT | SBTMSLOW_RESET)); ++ br32(bp, B44_SBTMSLOW); ++ udelay(1); ++ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET)); ++ br32(bp, B44_SBTMSLOW); ++ udelay(1); ++} ++ ++static void ssb_core_reset(struct b44 *bp) ++{ ++ u32 val; ++ ++ ssb_core_disable(bp); ++ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC)); ++ br32(bp, B44_SBTMSLOW); ++ udelay(1); ++ ++ /* Clear SERR if set, this is a hw bug workaround. */ ++ if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR) ++ bw32(bp, B44_SBTMSHIGH, 0); ++ ++ val = br32(bp, B44_SBIMSTATE); ++ if (val & (SBIMSTATE_IBE | SBIMSTATE_TO)) ++ bw32(bp, B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO)); ++ ++ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC)); ++ br32(bp, B44_SBTMSLOW); ++ udelay(1); ++ ++ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK)); ++ br32(bp, B44_SBTMSLOW); ++ udelay(1); ++} ++ ++static int ssb_core_unit(struct b44 *bp) ++{ ++#if 0 ++ u32 val = br32(bp, B44_SBADMATCH0); ++ u32 base; ++ ++ type = val & SBADMATCH0_TYPE_MASK; ++ switch (type) { ++ case 0: ++ base = val & SBADMATCH0_BS0_MASK; ++ break; ++ ++ case 1: ++ base = val & SBADMATCH0_BS1_MASK; ++ break; ++ ++ case 2: ++ default: ++ base = val & SBADMATCH0_BS2_MASK; ++ break; ++ }; ++#endif ++ return 0; ++} ++ ++static int ssb_is_core_up(struct b44 *bp) ++{ ++ return ((br32(bp, B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK)) ++ == SBTMSLOW_CLOCK); ++} ++ ++static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index) ++{ ++ u32 val; ++ ++ val = ((u32) data[2]) << 24; ++ val |= ((u32) data[3]) << 16; ++ val |= ((u32) data[4]) << 8; ++ val |= ((u32) data[5]) << 0; ++ bw32(bp, B44_CAM_DATA_LO, val); ++ val = (CAM_DATA_HI_VALID | ++ (((u32) data[0]) << 8) | ++ (((u32) data[1]) << 0)); ++ bw32(bp, B44_CAM_DATA_HI, val); ++ bw32(bp, B44_CAM_CTRL, (CAM_CTRL_WRITE | ++ (index << CAM_CTRL_INDEX_SHIFT))); ++ b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1); ++} ++ ++static inline void __b44_disable_ints(struct b44 *bp) ++{ ++ bw32(bp, B44_IMASK, 0); ++} ++ ++static void b44_disable_ints(struct b44 *bp) ++{ ++ __b44_disable_ints(bp); ++ ++ /* Flush posted writes. */ ++ br32(bp, B44_IMASK); ++} ++ ++static void b44_enable_ints(struct b44 *bp) ++{ ++ bw32(bp, B44_IMASK, bp->imask); ++} ++ ++static int b44_readphy(struct b44 *bp, int reg, u32 *val) ++{ ++ int err; ++ ++ bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); ++ bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | ++ (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) | ++ (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | ++ (reg << MDIO_DATA_RA_SHIFT) | ++ (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT))); ++ err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); ++ *val = br32(bp, B44_MDIO_DATA) & MDIO_DATA_DATA; ++ ++ return err; ++} ++ ++static int b44_writephy(struct b44 *bp, int reg, u32 val) ++{ ++ bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); ++ bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | ++ (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) | ++ (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | ++ (reg << MDIO_DATA_RA_SHIFT) | ++ (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT) | ++ (val & MDIO_DATA_DATA))); ++ return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); ++} ++ ++/* miilib interface */ ++/* FIXME FIXME: phy_id is ignored, bp->phy_addr use is unconditional ++ * due to code existing before miilib use was added to this driver. ++ * Someone should remove this artificial driver limitation in ++ * b44_{read,write}phy. bp->phy_addr itself is fine (and needed). ++ */ ++static int b44_mii_read(struct net_device *dev, int phy_id, int location) ++{ ++ u32 val; ++ struct b44 *bp = netdev_priv(dev); ++ int rc = b44_readphy(bp, location, &val); ++ if (rc) ++ return 0xffffffff; ++ return val; ++} ++ ++static void b44_mii_write(struct net_device *dev, int phy_id, int location, ++ int val) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ b44_writephy(bp, location, val); ++} ++ ++static int b44_phy_reset(struct b44 *bp) ++{ ++ u32 val; ++ int err; ++ ++ err = b44_writephy(bp, MII_BMCR, BMCR_RESET); ++ if (err) ++ return err; ++ udelay(100); ++ err = b44_readphy(bp, MII_BMCR, &val); ++ if (!err) { ++ if (val & BMCR_RESET) { ++ printk(KERN_ERR PFX "%s: PHY Reset would not complete.\n", ++ bp->dev->name); ++ err = -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags) ++{ ++ u32 val; ++ ++ bp->flags &= ~(B44_FLAG_TX_PAUSE | B44_FLAG_RX_PAUSE); ++ bp->flags |= pause_flags; ++ ++ val = br32(bp, B44_RXCONFIG); ++ if (pause_flags & B44_FLAG_RX_PAUSE) ++ val |= RXCONFIG_FLOW; ++ else ++ val &= ~RXCONFIG_FLOW; ++ bw32(bp, B44_RXCONFIG, val); ++ ++ val = br32(bp, B44_MAC_FLOW); ++ if (pause_flags & B44_FLAG_TX_PAUSE) ++ val |= (MAC_FLOW_PAUSE_ENAB | ++ (0xc0 & MAC_FLOW_RX_HI_WATER)); ++ else ++ val &= ~MAC_FLOW_PAUSE_ENAB; ++ bw32(bp, B44_MAC_FLOW, val); ++} ++ ++static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote) ++{ ++ u32 pause_enab = bp->flags & (B44_FLAG_TX_PAUSE | ++ B44_FLAG_RX_PAUSE); ++ ++ if (local & ADVERTISE_PAUSE_CAP) { ++ if (local & ADVERTISE_PAUSE_ASYM) { ++ if (remote & LPA_PAUSE_CAP) ++ pause_enab |= (B44_FLAG_TX_PAUSE | ++ B44_FLAG_RX_PAUSE); ++ else if (remote & LPA_PAUSE_ASYM) ++ pause_enab |= B44_FLAG_RX_PAUSE; ++ } else { ++ if (remote & LPA_PAUSE_CAP) ++ pause_enab |= (B44_FLAG_TX_PAUSE | ++ B44_FLAG_RX_PAUSE); ++ } ++ } else if (local & ADVERTISE_PAUSE_ASYM) { ++ if ((remote & LPA_PAUSE_CAP) && ++ (remote & LPA_PAUSE_ASYM)) ++ pause_enab |= B44_FLAG_TX_PAUSE; ++ } ++ ++ __b44_set_flow_ctrl(bp, pause_enab); ++} ++ ++static int b44_setup_phy(struct b44 *bp) ++{ ++ u32 val; ++ int err; ++ ++ if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0) ++ goto out; ++ if ((err = b44_writephy(bp, B44_MII_ALEDCTRL, ++ val & MII_ALEDCTRL_ALLMSK)) != 0) ++ goto out; ++ if ((err = b44_readphy(bp, B44_MII_TLEDCTRL, &val)) != 0) ++ goto out; ++ if ((err = b44_writephy(bp, B44_MII_TLEDCTRL, ++ val | MII_TLEDCTRL_ENABLE)) != 0) ++ goto out; ++ ++ if (!(bp->flags & B44_FLAG_FORCE_LINK)) { ++ u32 adv = ADVERTISE_CSMA; ++ ++ if (bp->flags & B44_FLAG_ADV_10HALF) ++ adv |= ADVERTISE_10HALF; ++ if (bp->flags & B44_FLAG_ADV_10FULL) ++ adv |= ADVERTISE_10FULL; ++ if (bp->flags & B44_FLAG_ADV_100HALF) ++ adv |= ADVERTISE_100HALF; ++ if (bp->flags & B44_FLAG_ADV_100FULL) ++ adv |= ADVERTISE_100FULL; ++ ++ if (bp->flags & B44_FLAG_PAUSE_AUTO) ++ adv |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; ++ ++ if ((err = b44_writephy(bp, MII_ADVERTISE, adv)) != 0) ++ goto out; ++ if ((err = b44_writephy(bp, MII_BMCR, (BMCR_ANENABLE | ++ BMCR_ANRESTART))) != 0) ++ goto out; ++ } else { ++ u32 bmcr; ++ ++ if ((err = b44_readphy(bp, MII_BMCR, &bmcr)) != 0) ++ goto out; ++ bmcr &= ~(BMCR_FULLDPLX | BMCR_ANENABLE | BMCR_SPEED100); ++ if (bp->flags & B44_FLAG_100_BASE_T) ++ bmcr |= BMCR_SPEED100; ++ if (bp->flags & B44_FLAG_FULL_DUPLEX) ++ bmcr |= BMCR_FULLDPLX; ++ if ((err = b44_writephy(bp, MII_BMCR, bmcr)) != 0) ++ goto out; ++ ++ /* Since we will not be negotiating there is no safe way ++ * to determine if the link partner supports flow control ++ * or not. So just disable it completely in this case. ++ */ ++ b44_set_flow_ctrl(bp, 0, 0); ++ } ++ ++out: ++ return err; ++} ++ ++static void b44_stats_update(struct b44 *bp) ++{ ++ unsigned long reg; ++ u32 *val; ++ ++ val = &bp->hw_stats.tx_good_octets; ++ for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) { ++ *val++ += br32(bp, reg); ++ } ++ val = &bp->hw_stats.rx_good_octets; ++ for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) { ++ *val++ += br32(bp, reg); ++ } ++} ++ ++static void b44_link_report(struct b44 *bp) ++{ ++ if (!netif_carrier_ok(bp->dev)) { ++ printk(KERN_INFO PFX "%s: Link is down.\n", bp->dev->name); ++ } else { ++ printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n", ++ bp->dev->name, ++ (bp->flags & B44_FLAG_100_BASE_T) ? 100 : 10, ++ (bp->flags & B44_FLAG_FULL_DUPLEX) ? "full" : "half"); ++ ++ printk(KERN_INFO PFX "%s: Flow control is %s for TX and " ++ "%s for RX.\n", ++ bp->dev->name, ++ (bp->flags & B44_FLAG_TX_PAUSE) ? "on" : "off", ++ (bp->flags & B44_FLAG_RX_PAUSE) ? "on" : "off"); ++ } ++} ++ ++static void b44_check_phy(struct b44 *bp) ++{ ++ u32 bmsr, aux; ++ ++ if (!b44_readphy(bp, MII_BMSR, &bmsr) && ++ !b44_readphy(bp, B44_MII_AUXCTRL, &aux) && ++ (bmsr != 0xffff)) { ++ if (aux & MII_AUXCTRL_SPEED) ++ bp->flags |= B44_FLAG_100_BASE_T; ++ else ++ bp->flags &= ~B44_FLAG_100_BASE_T; ++ if (aux & MII_AUXCTRL_DUPLEX) ++ bp->flags |= B44_FLAG_FULL_DUPLEX; ++ else ++ bp->flags &= ~B44_FLAG_FULL_DUPLEX; ++ ++ if (!netif_carrier_ok(bp->dev) && ++ (bmsr & BMSR_LSTATUS)) { ++ u32 val = br32(bp, B44_TX_CTRL); ++ u32 local_adv, remote_adv; ++ ++ if (bp->flags & B44_FLAG_FULL_DUPLEX) ++ val |= TX_CTRL_DUPLEX; ++ else ++ val &= ~TX_CTRL_DUPLEX; ++ bw32(bp, B44_TX_CTRL, val); ++ ++ if (!(bp->flags & B44_FLAG_FORCE_LINK) && ++ !b44_readphy(bp, MII_ADVERTISE, &local_adv) && ++ !b44_readphy(bp, MII_LPA, &remote_adv)) ++ b44_set_flow_ctrl(bp, local_adv, remote_adv); ++ ++ /* Link now up */ ++ netif_carrier_on(bp->dev); ++ b44_link_report(bp); ++ } else if (netif_carrier_ok(bp->dev) && !(bmsr & BMSR_LSTATUS)) { ++ /* Link now down */ ++ netif_carrier_off(bp->dev); ++ b44_link_report(bp); ++ } ++ ++ if (bmsr & BMSR_RFAULT) ++ printk(KERN_WARNING PFX "%s: Remote fault detected in PHY\n", ++ bp->dev->name); ++ if (bmsr & BMSR_JCD) ++ printk(KERN_WARNING PFX "%s: Jabber detected in PHY\n", ++ bp->dev->name); ++ } ++} ++ ++static void b44_timer(unsigned long __opaque) ++{ ++ struct b44 *bp = (struct b44 *) __opaque; ++ ++ spin_lock_irq(&bp->lock); ++ ++ b44_check_phy(bp); ++ ++ b44_stats_update(bp); ++ ++ spin_unlock_irq(&bp->lock); ++ ++ bp->timer.expires = jiffies + HZ; ++ add_timer(&bp->timer); ++} ++ ++static void b44_tx(struct b44 *bp) ++{ ++ u32 cur, cons; ++ ++ cur = br32(bp, B44_DMATX_STAT) & DMATX_STAT_CDMASK; ++ cur /= sizeof(struct dma_desc); ++ ++ /* XXX needs updating when NETIF_F_SG is supported */ ++ for (cons = bp->tx_cons; cons != cur; cons = NEXT_TX(cons)) { ++ struct ring_info *rp = &bp->tx_buffers[cons]; ++ struct sk_buff *skb = rp->skb; ++ ++ if (unlikely(skb == NULL)) ++ BUG(); ++ ++ pci_unmap_single(bp->pdev, ++ pci_unmap_addr(rp, mapping), ++ skb->len, ++ PCI_DMA_TODEVICE); ++ rp->skb = NULL; ++ dev_kfree_skb_irq(skb); ++ } ++ ++ bp->tx_cons = cons; ++ if (netif_queue_stopped(bp->dev) && ++ TX_BUFFS_AVAIL(bp) > B44_TX_WAKEUP_THRESH) ++ netif_wake_queue(bp->dev); ++ ++ bw32(bp, B44_GPTIMER, 0); ++} ++ ++/* Works like this. This chip writes a 'struct rx_header" 30 bytes ++ * before the DMA address you give it. So we allocate 30 more bytes ++ * for the RX buffer, DMA map all of it, skb_reserve the 30 bytes, then ++ * point the chip at 30 bytes past where the rx_header will go. ++ */ ++static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) ++{ ++ struct dma_desc *dp; ++ struct ring_info *src_map, *map; ++ struct rx_header *rh; ++ struct sk_buff *skb; ++ dma_addr_t mapping; ++ int dest_idx; ++ u32 ctrl; ++ ++ src_map = NULL; ++ if (src_idx >= 0) ++ src_map = &bp->rx_buffers[src_idx]; ++ dest_idx = dest_idx_unmasked & (B44_RX_RING_SIZE - 1); ++ map = &bp->rx_buffers[dest_idx]; ++ skb = dev_alloc_skb(RX_PKT_BUF_SZ); ++ if (skb == NULL) ++ return -ENOMEM; ++ ++ mapping = pci_map_single(bp->pdev, skb->data, ++ RX_PKT_BUF_SZ, ++ PCI_DMA_FROMDEVICE); ++ ++ /* Hardware bug work-around, the chip is unable to do PCI DMA ++ to/from anything above 1GB :-( */ ++ if(mapping+RX_PKT_BUF_SZ > B44_DMA_MASK) { ++ /* Sigh... */ ++ pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); ++ dev_kfree_skb_any(skb); ++ skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA); ++ if (skb == NULL) ++ return -ENOMEM; ++ mapping = pci_map_single(bp->pdev, skb->data, ++ RX_PKT_BUF_SZ, ++ PCI_DMA_FROMDEVICE); ++ if(mapping+RX_PKT_BUF_SZ > B44_DMA_MASK) { ++ pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); ++ dev_kfree_skb_any(skb); ++ return -ENOMEM; ++ } ++ } ++ ++ skb->dev = bp->dev; ++ skb_reserve(skb, bp->rx_offset); ++ ++ rh = (struct rx_header *) ++ (skb->data - bp->rx_offset); ++ rh->len = 0; ++ rh->flags = 0; ++ ++ map->skb = skb; ++ pci_unmap_addr_set(map, mapping, mapping); ++ ++ if (src_map != NULL) ++ src_map->skb = NULL; ++ ++ ctrl = (DESC_CTRL_LEN & (RX_PKT_BUF_SZ - bp->rx_offset)); ++ if (dest_idx == (B44_RX_RING_SIZE - 1)) ++ ctrl |= DESC_CTRL_EOT; ++ ++ dp = &bp->rx_ring[dest_idx]; ++ dp->ctrl = cpu_to_le32(ctrl); ++ dp->addr = cpu_to_le32((u32) mapping + bp->rx_offset + bp->dma_offset); ++ ++ return RX_PKT_BUF_SZ; ++} ++ ++static void b44_recycle_rx(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) ++{ ++ struct dma_desc *src_desc, *dest_desc; ++ struct ring_info *src_map, *dest_map; ++ struct rx_header *rh; ++ int dest_idx; ++ u32 ctrl; ++ ++ dest_idx = dest_idx_unmasked & (B44_RX_RING_SIZE - 1); ++ dest_desc = &bp->rx_ring[dest_idx]; ++ dest_map = &bp->rx_buffers[dest_idx]; ++ src_desc = &bp->rx_ring[src_idx]; ++ src_map = &bp->rx_buffers[src_idx]; ++ ++ dest_map->skb = src_map->skb; ++ rh = (struct rx_header *) src_map->skb->data; ++ rh->len = 0; ++ rh->flags = 0; ++ pci_unmap_addr_set(dest_map, mapping, ++ pci_unmap_addr(src_map, mapping)); ++ ++ ctrl = src_desc->ctrl; ++ if (dest_idx == (B44_RX_RING_SIZE - 1)) ++ ctrl |= cpu_to_le32(DESC_CTRL_EOT); ++ else ++ ctrl &= cpu_to_le32(~DESC_CTRL_EOT); ++ ++ dest_desc->ctrl = ctrl; ++ dest_desc->addr = src_desc->addr; ++ src_map->skb = NULL; ++ ++ pci_dma_sync_single_for_device(bp->pdev, src_desc->addr, ++ RX_PKT_BUF_SZ, ++ PCI_DMA_FROMDEVICE); ++} ++ ++static int b44_rx(struct b44 *bp, int budget) ++{ ++ int received; ++ u32 cons, prod; ++ ++ received = 0; ++ prod = br32(bp, B44_DMARX_STAT) & DMARX_STAT_CDMASK; ++ prod /= sizeof(struct dma_desc); ++ cons = bp->rx_cons; ++ ++ while (cons != prod && budget > 0) { ++ struct ring_info *rp = &bp->rx_buffers[cons]; ++ struct sk_buff *skb = rp->skb; ++ dma_addr_t map = pci_unmap_addr(rp, mapping); ++ struct rx_header *rh; ++ u16 len; ++ ++ pci_dma_sync_single_for_cpu(bp->pdev, map, ++ RX_PKT_BUF_SZ, ++ PCI_DMA_FROMDEVICE); ++ rh = (struct rx_header *) skb->data; ++ len = cpu_to_le16(rh->len); ++ if ((len > (RX_PKT_BUF_SZ - bp->rx_offset)) || ++ (rh->flags & cpu_to_le16(RX_FLAG_ERRORS))) { ++ drop_it: ++ b44_recycle_rx(bp, cons, bp->rx_prod); ++ drop_it_no_recycle: ++ bp->stats.rx_dropped++; ++ goto next_pkt; ++ } ++ ++ if (len == 0) { ++ int i = 0; ++ ++ do { ++ udelay(2); ++ barrier(); ++ len = cpu_to_le16(rh->len); ++ } while (len == 0 && i++ < 5); ++ if (len == 0) ++ goto drop_it; ++ } ++ ++ /* Omit CRC. */ ++ len -= 4; ++ ++ if (len > RX_COPY_THRESHOLD) { ++ int skb_size; ++ skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod); ++ if (skb_size < 0) ++ goto drop_it; ++ pci_unmap_single(bp->pdev, map, ++ skb_size, PCI_DMA_FROMDEVICE); ++ /* Leave out rx_header */ ++ skb_put(skb, len+bp->rx_offset); ++ skb_pull(skb,bp->rx_offset); ++ } else { ++ struct sk_buff *copy_skb; ++ ++ b44_recycle_rx(bp, cons, bp->rx_prod); ++ copy_skb = dev_alloc_skb(len + 2); ++ if (copy_skb == NULL) ++ goto drop_it_no_recycle; ++ ++ copy_skb->dev = bp->dev; ++ skb_reserve(copy_skb, 2); ++ skb_put(copy_skb, len); ++ /* DMA sync done above, copy just the actual packet */ ++ memcpy(copy_skb->data, skb->data+bp->rx_offset, len); ++ ++ skb = copy_skb; ++ } ++ skb->ip_summed = CHECKSUM_NONE; ++ skb->protocol = eth_type_trans(skb, bp->dev); ++ netif_receive_skb(skb); ++ bp->dev->last_rx = jiffies; ++ received++; ++ budget--; ++ next_pkt: ++ bp->rx_prod = (bp->rx_prod + 1) & ++ (B44_RX_RING_SIZE - 1); ++ cons = (cons + 1) & (B44_RX_RING_SIZE - 1); ++ } ++ ++ bp->rx_cons = cons; ++ bw32(bp, B44_DMARX_PTR, cons * sizeof(struct dma_desc)); ++ ++ return received; ++} ++ ++static int b44_poll(struct net_device *netdev, int *budget) ++{ ++ struct b44 *bp = netdev_priv(netdev); ++ int done; ++ ++ spin_lock_irq(&bp->lock); ++ ++ if (bp->istat & (ISTAT_TX | ISTAT_TO)) { ++ /* spin_lock(&bp->tx_lock); */ ++ b44_tx(bp); ++ /* spin_unlock(&bp->tx_lock); */ ++ } ++ spin_unlock_irq(&bp->lock); ++ ++ done = 1; ++ if (bp->istat & ISTAT_RX) { ++ int orig_budget = *budget; ++ int work_done; ++ ++ if (orig_budget > netdev->quota) ++ orig_budget = netdev->quota; ++ ++ work_done = b44_rx(bp, orig_budget); ++ ++ *budget -= work_done; ++ netdev->quota -= work_done; ++ ++ if (work_done >= orig_budget) ++ done = 0; ++ } ++ ++ if (bp->istat & ISTAT_ERRORS) { ++ spin_lock_irq(&bp->lock); ++ b44_halt(bp); ++ b44_init_rings(bp); ++ b44_init_hw(bp); ++ netif_wake_queue(bp->dev); ++ spin_unlock_irq(&bp->lock); ++ done = 1; ++ } ++ ++ if (done) { ++ netif_rx_complete(netdev); ++ b44_enable_ints(bp); ++ } ++ ++ return (done ? 0 : 1); ++} ++ ++static irqreturn_t b44_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ struct net_device *dev = dev_id; ++ struct b44 *bp = netdev_priv(dev); ++ unsigned long flags; ++ u32 istat, imask; ++ int handled = 0; ++ ++ spin_lock_irqsave(&bp->lock, flags); ++ ++ istat = br32(bp, B44_ISTAT); ++ imask = br32(bp, B44_IMASK); ++ ++ /* ??? What the fuck is the purpose of the interrupt mask ++ * ??? register if we have to mask it out by hand anyways? ++ */ ++ istat &= imask; ++ if (istat) { ++ handled = 1; ++ if (netif_rx_schedule_prep(dev)) { ++ /* NOTE: These writes are posted by the readback of ++ * the ISTAT register below. ++ */ ++ bp->istat = istat; ++ __b44_disable_ints(bp); ++ __netif_rx_schedule(dev); ++ } else { ++ printk(KERN_ERR PFX "%s: Error, poll already scheduled\n", ++ dev->name); ++ } ++ ++ bw32(bp, B44_ISTAT, istat); ++ br32(bp, B44_ISTAT); ++ } ++ spin_unlock_irqrestore(&bp->lock, flags); ++ return IRQ_RETVAL(handled); ++} ++ ++static void b44_tx_timeout(struct net_device *dev) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ ++ printk(KERN_ERR PFX "%s: transmit timed out, resetting\n", ++ dev->name); ++ ++ spin_lock_irq(&bp->lock); ++ ++ b44_halt(bp); ++ b44_init_rings(bp); ++ b44_init_hw(bp); ++ ++ spin_unlock_irq(&bp->lock); ++ ++ b44_enable_ints(bp); ++ ++ netif_wake_queue(dev); ++} ++ ++static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ struct sk_buff *bounce_skb; ++ dma_addr_t mapping; ++ u32 len, entry, ctrl; ++ ++ len = skb->len; ++ spin_lock_irq(&bp->lock); ++ ++ /* This is a hard error, log it. */ ++ if (unlikely(TX_BUFFS_AVAIL(bp) < 1)) { ++ netif_stop_queue(dev); ++ spin_unlock_irq(&bp->lock); ++ printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n", ++ dev->name); ++ return 1; ++ } ++ ++ mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE); ++ if(mapping+len > B44_DMA_MASK) { ++ /* Chip can't handle DMA to/from >1GB, use bounce buffer */ ++ pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE); ++ ++ bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ, ++ GFP_ATOMIC|GFP_DMA); ++ if (!bounce_skb) ++ return NETDEV_TX_BUSY; ++ ++ mapping = pci_map_single(bp->pdev, bounce_skb->data, ++ len, PCI_DMA_TODEVICE); ++ if(mapping+len > B44_DMA_MASK) { ++ pci_unmap_single(bp->pdev, mapping, ++ len, PCI_DMA_TODEVICE); ++ dev_kfree_skb_any(bounce_skb); ++ return NETDEV_TX_BUSY; ++ } ++ ++ memcpy(skb_put(bounce_skb, len), skb->data, skb->len); ++ dev_kfree_skb_any(skb); ++ skb = bounce_skb; ++ } ++ ++ entry = bp->tx_prod; ++ bp->tx_buffers[entry].skb = skb; ++ pci_unmap_addr_set(&bp->tx_buffers[entry], mapping, mapping); ++ ++ ctrl = (len & DESC_CTRL_LEN); ++ ctrl |= DESC_CTRL_IOC | DESC_CTRL_SOF | DESC_CTRL_EOF; ++ if (entry == (B44_TX_RING_SIZE - 1)) ++ ctrl |= DESC_CTRL_EOT; ++ ++ bp->tx_ring[entry].ctrl = cpu_to_le32(ctrl); ++ bp->tx_ring[entry].addr = cpu_to_le32((u32) mapping+bp->dma_offset); ++ ++ entry = NEXT_TX(entry); ++ ++ bp->tx_prod = entry; ++ ++ wmb(); ++ ++ bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc)); ++ if (bp->flags & B44_FLAG_BUGGY_TXPTR) ++ bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc)); ++ if (bp->flags & B44_FLAG_REORDER_BUG) ++ br32(bp, B44_DMATX_PTR); ++ ++ if (TX_BUFFS_AVAIL(bp) < 1) ++ netif_stop_queue(dev); ++ ++ spin_unlock_irq(&bp->lock); ++ ++ dev->trans_start = jiffies; ++ ++ return 0; ++} ++ ++static int b44_change_mtu(struct net_device *dev, int new_mtu) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ ++ if (new_mtu < B44_MIN_MTU || new_mtu > B44_MAX_MTU) ++ return -EINVAL; ++ ++ if (!netif_running(dev)) { ++ /* We'll just catch it later when the ++ * device is up'd. ++ */ ++ dev->mtu = new_mtu; ++ return 0; ++ } ++ ++ spin_lock_irq(&bp->lock); ++ b44_halt(bp); ++ dev->mtu = new_mtu; ++ b44_init_rings(bp); ++ b44_init_hw(bp); ++ spin_unlock_irq(&bp->lock); ++ ++ b44_enable_ints(bp); ++ ++ return 0; ++} ++ ++/* Free up pending packets in all rx/tx rings. ++ * ++ * The chip has been shut down and the driver detached from ++ * the networking, so no interrupts or new tx packets will ++ * end up in the driver. bp->lock is not held and we are not ++ * in an interrupt context and thus may sleep. ++ */ ++static void b44_free_rings(struct b44 *bp) ++{ ++ struct ring_info *rp; ++ int i; ++ ++ for (i = 0; i < B44_RX_RING_SIZE; i++) { ++ rp = &bp->rx_buffers[i]; ++ ++ if (rp->skb == NULL) ++ continue; ++ pci_unmap_single(bp->pdev, ++ pci_unmap_addr(rp, mapping), ++ RX_PKT_BUF_SZ, ++ PCI_DMA_FROMDEVICE); ++ dev_kfree_skb_any(rp->skb); ++ rp->skb = NULL; ++ } ++ ++ /* XXX needs changes once NETIF_F_SG is set... */ ++ for (i = 0; i < B44_TX_RING_SIZE; i++) { ++ rp = &bp->tx_buffers[i]; ++ ++ if (rp->skb == NULL) ++ continue; ++ pci_unmap_single(bp->pdev, ++ pci_unmap_addr(rp, mapping), ++ rp->skb->len, ++ PCI_DMA_TODEVICE); ++ dev_kfree_skb_any(rp->skb); ++ rp->skb = NULL; ++ } ++} ++ ++/* Initialize tx/rx rings for packet processing. ++ * ++ * The chip has been shut down and the driver detached from ++ * the networking, so no interrupts or new tx packets will ++ * end up in the driver. bp->lock is not held and we are not ++ * in an interrupt context and thus may sleep. ++ */ ++static void b44_init_rings(struct b44 *bp) ++{ ++ int i; ++ ++ b44_free_rings(bp); ++ ++ memset(bp->rx_ring, 0, B44_RX_RING_BYTES); ++ memset(bp->tx_ring, 0, B44_TX_RING_BYTES); ++ ++ for (i = 0; i < bp->rx_pending; i++) { ++ if (b44_alloc_rx_skb(bp, -1, i) < 0) ++ break; ++ } ++} ++ ++/* ++ * Must not be invoked with interrupt sources disabled and ++ * the hardware shutdown down. ++ */ ++static void b44_free_consistent(struct b44 *bp) ++{ ++ if (bp->rx_buffers) { ++ kfree(bp->rx_buffers); ++ bp->rx_buffers = NULL; ++ } ++ if (bp->tx_buffers) { ++ kfree(bp->tx_buffers); ++ bp->tx_buffers = NULL; ++ } ++ if (bp->rx_ring) { ++ pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, ++ bp->rx_ring, bp->rx_ring_dma); ++ bp->rx_ring = NULL; ++ } ++ if (bp->tx_ring) { ++ pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, ++ bp->tx_ring, bp->tx_ring_dma); ++ bp->tx_ring = NULL; ++ } ++} ++ ++/* ++ * Must not be invoked with interrupt sources disabled and ++ * the hardware shutdown down. Can sleep. ++ */ ++static int b44_alloc_consistent(struct b44 *bp) ++{ ++ int size; ++ ++ size = B44_RX_RING_SIZE * sizeof(struct ring_info); ++ bp->rx_buffers = kmalloc(size, GFP_KERNEL); ++ if (!bp->rx_buffers) ++ goto out_err; ++ memset(bp->rx_buffers, 0, size); ++ ++ size = B44_TX_RING_SIZE * sizeof(struct ring_info); ++ bp->tx_buffers = kmalloc(size, GFP_KERNEL); ++ if (!bp->tx_buffers) ++ goto out_err; ++ memset(bp->tx_buffers, 0, size); ++ ++ size = DMA_TABLE_BYTES; ++ bp->rx_ring = pci_alloc_consistent(bp->pdev, size, &bp->rx_ring_dma); ++ if (!bp->rx_ring) ++ goto out_err; ++ ++ bp->tx_ring = pci_alloc_consistent(bp->pdev, size, &bp->tx_ring_dma); ++ if (!bp->tx_ring) ++ goto out_err; ++ ++ return 0; ++ ++out_err: ++ b44_free_consistent(bp); ++ return -ENOMEM; ++} ++ ++/* bp->lock is held. */ ++static void b44_clear_stats(struct b44 *bp) ++{ ++ unsigned long reg; ++ ++ bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); ++ for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) ++ br32(bp, reg); ++ for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) ++ br32(bp, reg); ++} ++ ++/* bp->lock is held. */ ++static void b44_chip_reset(struct b44 *bp) ++{ ++ if (ssb_is_core_up(bp)) { ++ bw32(bp, B44_RCV_LAZY, 0); ++ bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE); ++ b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 100, 1); ++ bw32(bp, B44_DMATX_CTRL, 0); ++ bp->tx_prod = bp->tx_cons = 0; ++ if (br32(bp, B44_DMARX_STAT) & DMARX_STAT_EMASK) { ++ b44_wait_bit(bp, B44_DMARX_STAT, DMARX_STAT_SIDLE, ++ 100, 0); ++ } ++ bw32(bp, B44_DMARX_CTRL, 0); ++ bp->rx_prod = bp->rx_cons = 0; ++ } else { ++ ssb_pci_setup(bp, (bp->core_unit == 0 ? ++ SBINTVEC_ENET0 : ++ SBINTVEC_ENET1)); ++ } ++ ++ ssb_core_reset(bp); ++ ++ b44_clear_stats(bp); ++ ++ /* Make PHY accessible. */ ++ bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | ++ (0x0d & MDIO_CTRL_MAXF_MASK))); ++ br32(bp, B44_MDIO_CTRL); ++ ++ if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) { ++ bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL); ++ br32(bp, B44_ENET_CTRL); ++ bp->flags &= ~B44_FLAG_INTERNAL_PHY; ++ } else { ++ u32 val = br32(bp, B44_DEVCTRL); ++ ++ if (val & DEVCTRL_EPR) { ++ bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR)); ++ br32(bp, B44_DEVCTRL); ++ udelay(100); ++ } ++ bp->flags |= B44_FLAG_INTERNAL_PHY; ++ } ++} ++ ++/* bp->lock is held. */ ++static void b44_halt(struct b44 *bp) ++{ ++ b44_disable_ints(bp); ++ b44_chip_reset(bp); ++} ++ ++/* bp->lock is held. */ ++static void __b44_set_mac_addr(struct b44 *bp) ++{ ++ bw32(bp, B44_CAM_CTRL, 0); ++ if (!(bp->dev->flags & IFF_PROMISC)) { ++ u32 val; ++ ++ __b44_cam_write(bp, bp->dev->dev_addr, 0); ++ val = br32(bp, B44_CAM_CTRL); ++ bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE); ++ } ++} ++ ++static int b44_set_mac_addr(struct net_device *dev, void *p) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ struct sockaddr *addr = p; ++ ++ if (netif_running(dev)) ++ return -EBUSY; ++ ++ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); ++ ++ spin_lock_irq(&bp->lock); ++ __b44_set_mac_addr(bp); ++ spin_unlock_irq(&bp->lock); ++ ++ return 0; ++} ++ ++/* Called at device open time to get the chip ready for ++ * packet processing. Invoked with bp->lock held. ++ */ ++static void __b44_set_rx_mode(struct net_device *); ++static void b44_init_hw(struct b44 *bp) ++{ ++ u32 val; ++ ++ b44_chip_reset(bp); ++ b44_phy_reset(bp); ++ b44_setup_phy(bp); ++ ++ /* Enable CRC32, set proper LED modes and power on PHY */ ++ bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL); ++ bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT)); ++ ++ /* This sets the MAC address too. */ ++ __b44_set_rx_mode(bp->dev); ++ ++ /* MTU + eth header + possible VLAN tag + struct rx_header */ ++ bw32(bp, B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); ++ bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); ++ ++ bw32(bp, B44_TX_WMARK, 56); /* XXX magic */ ++ bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE); ++ bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset); ++ bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE | ++ (bp->rx_offset << DMARX_CTRL_ROSHIFT))); ++ bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset); ++ ++ bw32(bp, B44_DMARX_PTR, bp->rx_pending); ++ bp->rx_prod = bp->rx_pending; ++ ++ bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); ++ ++ val = br32(bp, B44_ENET_CTRL); ++ bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE)); ++} ++ ++static int b44_open(struct net_device *dev) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ int err; ++ ++ err = b44_alloc_consistent(bp); ++ if (err) ++ return err; ++ ++ err = request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev); ++ if (err) ++ goto err_out_free; ++ ++ spin_lock_irq(&bp->lock); ++ ++ b44_init_rings(bp); ++ b44_init_hw(bp); ++ bp->flags |= B44_FLAG_INIT_COMPLETE; ++ ++ spin_unlock_irq(&bp->lock); ++ ++ init_timer(&bp->timer); ++ bp->timer.expires = jiffies + HZ; ++ bp->timer.data = (unsigned long) bp; ++ bp->timer.function = b44_timer; ++ add_timer(&bp->timer); ++ ++ b44_enable_ints(bp); ++ ++ return 0; ++ ++err_out_free: ++ b44_free_consistent(bp); ++ return err; ++} ++ ++#if 0 ++/*static*/ void b44_dump_state(struct b44 *bp) ++{ ++ u32 val32, val32_2, val32_3, val32_4, val32_5; ++ u16 val16; ++ ++ pci_read_config_word(bp->pdev, PCI_STATUS, &val16); ++ printk("DEBUG: PCI status [%04x] \n", val16); ++ ++} ++#endif ++ ++#ifdef CONFIG_NET_POLL_CONTROLLER ++/* ++ * Polling receive - used by netconsole and other diagnostic tools ++ * to allow network i/o with interrupts disabled. ++ */ ++static void b44_poll_controller(struct net_device *dev) ++{ ++ disable_irq(dev->irq); ++ b44_interrupt(dev->irq, dev, NULL); ++ enable_irq(dev->irq); ++} ++#endif ++ ++static int b44_close(struct net_device *dev) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ ++ netif_stop_queue(dev); ++ ++ del_timer_sync(&bp->timer); ++ ++ spin_lock_irq(&bp->lock); ++ ++#if 0 ++ b44_dump_state(bp); ++#endif ++ b44_halt(bp); ++ b44_free_rings(bp); ++ bp->flags &= ~B44_FLAG_INIT_COMPLETE; ++ netif_carrier_off(bp->dev); ++ ++ spin_unlock_irq(&bp->lock); ++ ++ free_irq(dev->irq, dev); ++ ++ b44_free_consistent(bp); ++ ++ return 0; ++} ++ ++static struct net_device_stats *b44_get_stats(struct net_device *dev) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ struct net_device_stats *nstat = &bp->stats; ++ struct b44_hw_stats *hwstat = &bp->hw_stats; ++ ++ /* Convert HW stats into netdevice stats. */ ++ nstat->rx_packets = hwstat->rx_pkts; ++ nstat->tx_packets = hwstat->tx_pkts; ++ nstat->rx_bytes = hwstat->rx_octets; ++ nstat->tx_bytes = hwstat->tx_octets; ++ nstat->tx_errors = (hwstat->tx_jabber_pkts + ++ hwstat->tx_oversize_pkts + ++ hwstat->tx_underruns + ++ hwstat->tx_excessive_cols + ++ hwstat->tx_late_cols); ++ nstat->multicast = hwstat->tx_multicast_pkts; ++ nstat->collisions = hwstat->tx_total_cols; ++ ++ nstat->rx_length_errors = (hwstat->rx_oversize_pkts + ++ hwstat->rx_undersize); ++ nstat->rx_over_errors = hwstat->rx_missed_pkts; ++ nstat->rx_frame_errors = hwstat->rx_align_errs; ++ nstat->rx_crc_errors = hwstat->rx_crc_errs; ++ nstat->rx_errors = (hwstat->rx_jabber_pkts + ++ hwstat->rx_oversize_pkts + ++ hwstat->rx_missed_pkts + ++ hwstat->rx_crc_align_errs + ++ hwstat->rx_undersize + ++ hwstat->rx_crc_errs + ++ hwstat->rx_align_errs + ++ hwstat->rx_symbol_errs); ++ ++ nstat->tx_aborted_errors = hwstat->tx_underruns; ++#if 0 ++ /* Carrier lost counter seems to be broken for some devices */ ++ nstat->tx_carrier_errors = hwstat->tx_carrier_lost; ++#endif ++ ++ return nstat; ++} ++ ++static int __b44_load_mcast(struct b44 *bp, struct net_device *dev) ++{ ++ struct dev_mc_list *mclist; ++ int i, num_ents; ++ ++ num_ents = min_t(int, dev->mc_count, B44_MCAST_TABLE_SIZE); ++ mclist = dev->mc_list; ++ for (i = 0; mclist && i < num_ents; i++, mclist = mclist->next) { ++ __b44_cam_write(bp, mclist->dmi_addr, i + 1); ++ } ++ return i+1; ++} ++ ++static void __b44_set_rx_mode(struct net_device *dev) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ u32 val; ++ int i=0; ++ unsigned char zero[6] = {0,0,0,0,0,0}; ++ ++ val = br32(bp, B44_RXCONFIG); ++ val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI); ++ if (dev->flags & IFF_PROMISC) { ++ val |= RXCONFIG_PROMISC; ++ bw32(bp, B44_RXCONFIG, val); ++ } else { ++ __b44_set_mac_addr(bp); ++ ++ if (dev->flags & IFF_ALLMULTI) ++ val |= RXCONFIG_ALLMULTI; ++ else ++ i=__b44_load_mcast(bp, dev); ++ ++ for(;i<64;i++) { ++ __b44_cam_write(bp, zero, i); ++ } ++ bw32(bp, B44_RXCONFIG, val); ++ val = br32(bp, B44_CAM_CTRL); ++ bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE); ++ } ++} ++ ++static void b44_set_rx_mode(struct net_device *dev) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ ++ spin_lock_irq(&bp->lock); ++ __b44_set_rx_mode(dev); ++ spin_unlock_irq(&bp->lock); ++} ++ ++static u32 b44_get_msglevel(struct net_device *dev) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ return bp->msg_enable; ++} ++ ++static void b44_set_msglevel(struct net_device *dev, u32 value) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ bp->msg_enable = value; ++} ++ ++static void b44_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ struct pci_dev *pci_dev = bp->pdev; ++ ++ strcpy (info->driver, DRV_MODULE_NAME); ++ strcpy (info->version, DRV_MODULE_VERSION); ++ strcpy (info->bus_info, pci_name(pci_dev)); ++} ++ ++static int b44_nway_reset(struct net_device *dev) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ u32 bmcr; ++ int r; ++ ++ spin_lock_irq(&bp->lock); ++ b44_readphy(bp, MII_BMCR, &bmcr); ++ b44_readphy(bp, MII_BMCR, &bmcr); ++ r = -EINVAL; ++ if (bmcr & BMCR_ANENABLE) { ++ b44_writephy(bp, MII_BMCR, ++ bmcr | BMCR_ANRESTART); ++ r = 0; ++ } ++ spin_unlock_irq(&bp->lock); ++ ++ return r; ++} ++ ++static int b44_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ ++ if (!(bp->flags & B44_FLAG_INIT_COMPLETE)) ++ return -EAGAIN; ++ cmd->supported = (SUPPORTED_Autoneg); ++ cmd->supported |= (SUPPORTED_100baseT_Half | ++ SUPPORTED_100baseT_Full | ++ SUPPORTED_10baseT_Half | ++ SUPPORTED_10baseT_Full | ++ SUPPORTED_MII); ++ ++ cmd->advertising = 0; ++ if (bp->flags & B44_FLAG_ADV_10HALF) ++ cmd->advertising |= ADVERTISE_10HALF; ++ if (bp->flags & B44_FLAG_ADV_10FULL) ++ cmd->advertising |= ADVERTISE_10FULL; ++ if (bp->flags & B44_FLAG_ADV_100HALF) ++ cmd->advertising |= ADVERTISE_100HALF; ++ if (bp->flags & B44_FLAG_ADV_100FULL) ++ cmd->advertising |= ADVERTISE_100FULL; ++ cmd->advertising |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; ++ cmd->speed = (bp->flags & B44_FLAG_100_BASE_T) ? ++ SPEED_100 : SPEED_10; ++ cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ? ++ DUPLEX_FULL : DUPLEX_HALF; ++ cmd->port = 0; ++ cmd->phy_address = bp->phy_addr; ++ cmd->transceiver = (bp->flags & B44_FLAG_INTERNAL_PHY) ? ++ XCVR_INTERNAL : XCVR_EXTERNAL; ++ cmd->autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ? ++ AUTONEG_DISABLE : AUTONEG_ENABLE; ++ cmd->maxtxpkt = 0; ++ cmd->maxrxpkt = 0; ++ return 0; ++} ++ ++static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ ++ if (!(bp->flags & B44_FLAG_INIT_COMPLETE)) ++ return -EAGAIN; ++ ++ /* We do not support gigabit. */ ++ if (cmd->autoneg == AUTONEG_ENABLE) { ++ if (cmd->advertising & ++ (ADVERTISED_1000baseT_Half | ++ ADVERTISED_1000baseT_Full)) ++ return -EINVAL; ++ } else if ((cmd->speed != SPEED_100 && ++ cmd->speed != SPEED_10) || ++ (cmd->duplex != DUPLEX_HALF && ++ cmd->duplex != DUPLEX_FULL)) { ++ return -EINVAL; ++ } ++ ++ spin_lock_irq(&bp->lock); ++ ++ if (cmd->autoneg == AUTONEG_ENABLE) { ++ bp->flags &= ~B44_FLAG_FORCE_LINK; ++ bp->flags &= ~(B44_FLAG_ADV_10HALF | ++ B44_FLAG_ADV_10FULL | ++ B44_FLAG_ADV_100HALF | ++ B44_FLAG_ADV_100FULL); ++ if (cmd->advertising & ADVERTISE_10HALF) ++ bp->flags |= B44_FLAG_ADV_10HALF; ++ if (cmd->advertising & ADVERTISE_10FULL) ++ bp->flags |= B44_FLAG_ADV_10FULL; ++ if (cmd->advertising & ADVERTISE_100HALF) ++ bp->flags |= B44_FLAG_ADV_100HALF; ++ if (cmd->advertising & ADVERTISE_100FULL) ++ bp->flags |= B44_FLAG_ADV_100FULL; ++ } else { ++ bp->flags |= B44_FLAG_FORCE_LINK; ++ if (cmd->speed == SPEED_100) ++ bp->flags |= B44_FLAG_100_BASE_T; ++ if (cmd->duplex == DUPLEX_FULL) ++ bp->flags |= B44_FLAG_FULL_DUPLEX; ++ } ++ ++ b44_setup_phy(bp); ++ ++ spin_unlock_irq(&bp->lock); ++ ++ return 0; ++} ++ ++static void b44_get_ringparam(struct net_device *dev, ++ struct ethtool_ringparam *ering) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ ++ ering->rx_max_pending = B44_RX_RING_SIZE - 1; ++ ering->rx_pending = bp->rx_pending; ++ ++ /* XXX ethtool lacks a tx_max_pending, oops... */ ++} ++ ++static int b44_set_ringparam(struct net_device *dev, ++ struct ethtool_ringparam *ering) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ ++ if ((ering->rx_pending > B44_RX_RING_SIZE - 1) || ++ (ering->rx_mini_pending != 0) || ++ (ering->rx_jumbo_pending != 0) || ++ (ering->tx_pending > B44_TX_RING_SIZE - 1)) ++ return -EINVAL; ++ ++ spin_lock_irq(&bp->lock); ++ ++ bp->rx_pending = ering->rx_pending; ++ bp->tx_pending = ering->tx_pending; ++ ++ b44_halt(bp); ++ b44_init_rings(bp); ++ b44_init_hw(bp); ++ netif_wake_queue(bp->dev); ++ spin_unlock_irq(&bp->lock); ++ ++ b44_enable_ints(bp); ++ ++ return 0; ++} ++ ++static void b44_get_pauseparam(struct net_device *dev, ++ struct ethtool_pauseparam *epause) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ ++ epause->autoneg = ++ (bp->flags & B44_FLAG_PAUSE_AUTO) != 0; ++ epause->rx_pause = ++ (bp->flags & B44_FLAG_RX_PAUSE) != 0; ++ epause->tx_pause = ++ (bp->flags & B44_FLAG_TX_PAUSE) != 0; ++} ++ ++static int b44_set_pauseparam(struct net_device *dev, ++ struct ethtool_pauseparam *epause) ++{ ++ struct b44 *bp = netdev_priv(dev); ++ ++ spin_lock_irq(&bp->lock); ++ if (epause->autoneg) ++ bp->flags |= B44_FLAG_PAUSE_AUTO; ++ else ++ bp->flags &= ~B44_FLAG_PAUSE_AUTO; ++ if (epause->rx_pause) ++ bp->flags |= B44_FLAG_RX_PAUSE; ++ else ++ bp->flags &= ~B44_FLAG_RX_PAUSE; ++ if (epause->tx_pause) ++ bp->flags |= B44_FLAG_TX_PAUSE; ++ else ++ bp->flags &= ~B44_FLAG_TX_PAUSE; ++ if (bp->flags & B44_FLAG_PAUSE_AUTO) { ++ b44_halt(bp); ++ b44_init_rings(bp); ++ b44_init_hw(bp); ++ } else { ++ __b44_set_flow_ctrl(bp, bp->flags); ++ } ++ spin_unlock_irq(&bp->lock); ++ ++ b44_enable_ints(bp); ++ ++ return 0; ++} ++ ++static struct ethtool_ops b44_ethtool_ops = { ++ .get_drvinfo = b44_get_drvinfo, ++ .get_settings = b44_get_settings, ++ .set_settings = b44_set_settings, ++ .nway_reset = b44_nway_reset, ++ .get_link = ethtool_op_get_link, ++ .get_ringparam = b44_get_ringparam, ++ .set_ringparam = b44_set_ringparam, ++ .get_pauseparam = b44_get_pauseparam, ++ .set_pauseparam = b44_set_pauseparam, ++ .get_msglevel = b44_get_msglevel, ++ .set_msglevel = b44_set_msglevel, ++}; ++ ++static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) ++{ ++ struct mii_ioctl_data *data = if_mii(ifr); ++ struct b44 *bp = netdev_priv(dev); ++ int err; ++ ++ spin_lock_irq(&bp->lock); ++ err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL); ++ spin_unlock_irq(&bp->lock); ++ ++ return err; ++} ++ ++/* Read 128-bytes of EEPROM. */ ++static int b44_read_eeprom(struct b44 *bp, u8 *data) ++{ ++ long i; ++ u16 *ptr = (u16 *) data; ++ ++ for (i = 0; i < 128; i += 2) ++ ptr[i / 2] = readw(bp->regs + 4096 + i); ++ ++ return 0; ++} ++ ++static int __devinit b44_get_invariants(struct b44 *bp) ++{ ++ u8 eeprom[128]; ++ int err; ++ ++ err = b44_read_eeprom(bp, &eeprom[0]); ++ if (err) ++ goto out; ++ ++ bp->dev->dev_addr[0] = eeprom[79]; ++ bp->dev->dev_addr[1] = eeprom[78]; ++ bp->dev->dev_addr[2] = eeprom[81]; ++ bp->dev->dev_addr[3] = eeprom[80]; ++ bp->dev->dev_addr[4] = eeprom[83]; ++ bp->dev->dev_addr[5] = eeprom[82]; ++ ++ bp->phy_addr = eeprom[90] & 0x1f; ++ ++ /* With this, plus the rx_header prepended to the data by the ++ * hardware, we'll land the ethernet header on a 2-byte boundary. ++ */ ++ bp->rx_offset = 30; ++ ++ bp->imask = IMASK_DEF; ++ ++ bp->core_unit = ssb_core_unit(bp); ++ bp->dma_offset = SB_PCI_DMA; ++ ++ /* XXX - really required? ++ bp->flags |= B44_FLAG_BUGGY_TXPTR; ++ */ ++out: ++ return err; ++} ++ ++static int __devinit b44_init_one(struct pci_dev *pdev, ++ const struct pci_device_id *ent) ++{ ++ static int b44_version_printed = 0; ++ unsigned long b44reg_base, b44reg_len; ++ struct net_device *dev; ++ struct b44 *bp; ++ int err, i; ++ ++ if (b44_version_printed++ == 0) ++ printk(KERN_INFO "%s", version); ++ ++ err = pci_enable_device(pdev); ++ if (err) { ++ printk(KERN_ERR PFX "Cannot enable PCI device, " ++ "aborting.\n"); ++ return err; ++ } ++ ++ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { ++ printk(KERN_ERR PFX "Cannot find proper PCI device " ++ "base address, aborting.\n"); ++ err = -ENODEV; ++ goto err_out_disable_pdev; ++ } ++ ++ err = pci_request_regions(pdev, DRV_MODULE_NAME); ++ if (err) { ++ printk(KERN_ERR PFX "Cannot obtain PCI resources, " ++ "aborting.\n"); ++ goto err_out_disable_pdev; ++ } ++ ++ pci_set_master(pdev); ++ ++ err = pci_set_dma_mask(pdev, (u64) B44_DMA_MASK); ++ if (err) { ++ printk(KERN_ERR PFX "No usable DMA configuration, " ++ "aborting.\n"); ++ goto err_out_free_res; ++ } ++ ++ err = pci_set_consistent_dma_mask(pdev, (u64) B44_DMA_MASK); ++ if (err) { ++ printk(KERN_ERR PFX "No usable DMA configuration, " ++ "aborting.\n"); ++ goto err_out_free_res; ++ } ++ ++ b44reg_base = pci_resource_start(pdev, 0); ++ b44reg_len = pci_resource_len(pdev, 0); ++ ++ dev = alloc_etherdev(sizeof(*bp)); ++ if (!dev) { ++ printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n"); ++ err = -ENOMEM; ++ goto err_out_free_res; ++ } ++ ++ SET_MODULE_OWNER(dev); ++ SET_NETDEV_DEV(dev,&pdev->dev); ++ ++ /* No interesting netdevice features in this card... */ ++ dev->features |= 0; ++ ++ bp = netdev_priv(dev); ++ bp->pdev = pdev; ++ bp->dev = dev; ++ if (b44_debug >= 0) ++ bp->msg_enable = (1 << b44_debug) - 1; ++ else ++ bp->msg_enable = B44_DEF_MSG_ENABLE; ++ ++ spin_lock_init(&bp->lock); ++ ++ bp->regs = ioremap(b44reg_base, b44reg_len); ++ if (bp->regs == 0UL) { ++ printk(KERN_ERR PFX "Cannot map device registers, " ++ "aborting.\n"); ++ err = -ENOMEM; ++ goto err_out_free_dev; ++ } ++ ++ bp->rx_pending = B44_DEF_RX_RING_PENDING; ++ bp->tx_pending = B44_DEF_TX_RING_PENDING; ++ ++ dev->open = b44_open; ++ dev->stop = b44_close; ++ dev->hard_start_xmit = b44_start_xmit; ++ dev->get_stats = b44_get_stats; ++ dev->set_multicast_list = b44_set_rx_mode; ++ dev->set_mac_address = b44_set_mac_addr; ++ dev->do_ioctl = b44_ioctl; ++ dev->tx_timeout = b44_tx_timeout; ++ dev->poll = b44_poll; ++ dev->weight = 64; ++ dev->watchdog_timeo = B44_TX_TIMEOUT; ++#ifdef CONFIG_NET_POLL_CONTROLLER ++ dev->poll_controller = b44_poll_controller; ++#endif ++ dev->change_mtu = b44_change_mtu; ++ dev->irq = pdev->irq; ++ SET_ETHTOOL_OPS(dev, &b44_ethtool_ops); ++ ++ err = b44_get_invariants(bp); ++ if (err) { ++ printk(KERN_ERR PFX "Problem fetching invariants of chip, " ++ "aborting.\n"); ++ goto err_out_iounmap; ++ } ++ ++ bp->mii_if.dev = dev; ++ bp->mii_if.mdio_read = b44_mii_read; ++ bp->mii_if.mdio_write = b44_mii_write; ++ bp->mii_if.phy_id = bp->phy_addr; ++ bp->mii_if.phy_id_mask = 0x1f; ++ bp->mii_if.reg_num_mask = 0x1f; ++ ++ /* By default, advertise all speed/duplex settings. */ ++ bp->flags |= (B44_FLAG_ADV_10HALF | B44_FLAG_ADV_10FULL | ++ B44_FLAG_ADV_100HALF | B44_FLAG_ADV_100FULL); ++ ++ /* By default, auto-negotiate PAUSE. */ ++ bp->flags |= B44_FLAG_PAUSE_AUTO; ++ ++ err = register_netdev(dev); ++ if (err) { ++ printk(KERN_ERR PFX "Cannot register net device, " ++ "aborting.\n"); ++ goto err_out_iounmap; ++ } ++ ++ pci_set_drvdata(pdev, dev); ++ ++ pci_save_state(bp->pdev); ++ ++ printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name); ++ for (i = 0; i < 6; i++) ++ printk("%2.2x%c", dev->dev_addr[i], ++ i == 5 ? '\n' : ':'); ++ ++ return 0; ++ ++err_out_iounmap: ++ iounmap(bp->regs); ++ ++err_out_free_dev: ++ free_netdev(dev); ++ ++err_out_free_res: ++ pci_release_regions(pdev); ++ ++err_out_disable_pdev: ++ pci_disable_device(pdev); ++ pci_set_drvdata(pdev, NULL); ++ return err; ++} ++ ++static void __devexit b44_remove_one(struct pci_dev *pdev) ++{ ++ struct net_device *dev = pci_get_drvdata(pdev); ++ ++ if (dev) { ++ struct b44 *bp = netdev_priv(dev); ++ ++ unregister_netdev(dev); ++ iounmap(bp->regs); ++ free_netdev(dev); ++ pci_release_regions(pdev); ++ pci_disable_device(pdev); ++ pci_set_drvdata(pdev, NULL); ++ } ++} ++ ++static int b44_suspend(struct pci_dev *pdev, pm_message_t state) ++{ ++ struct net_device *dev = pci_get_drvdata(pdev); ++ struct b44 *bp = netdev_priv(dev); ++ ++ if (!netif_running(dev)) ++ return 0; ++ ++ del_timer_sync(&bp->timer); ++ ++ spin_lock_irq(&bp->lock); ++ ++ b44_halt(bp); ++ netif_carrier_off(bp->dev); ++ netif_device_detach(bp->dev); ++ b44_free_rings(bp); ++ ++ spin_unlock_irq(&bp->lock); ++ return 0; ++} ++ ++static int b44_resume(struct pci_dev *pdev) ++{ ++ struct net_device *dev = pci_get_drvdata(pdev); ++ struct b44 *bp = netdev_priv(dev); ++ ++ pci_restore_state(pdev); ++ ++ if (!netif_running(dev)) ++ return 0; ++ ++ spin_lock_irq(&bp->lock); ++ ++ b44_init_rings(bp); ++ b44_init_hw(bp); ++ netif_device_attach(bp->dev); ++ spin_unlock_irq(&bp->lock); ++ ++ bp->timer.expires = jiffies + HZ; ++ add_timer(&bp->timer); ++ ++ b44_enable_ints(bp); ++ return 0; ++} ++ ++static struct pci_driver b44_driver = { ++ .name = DRV_MODULE_NAME, ++ .id_table = b44_pci_tbl, ++ .probe = b44_init_one, ++ .remove = __devexit_p(b44_remove_one), ++ .suspend = b44_suspend, ++ .resume = b44_resume, ++}; ++ ++static int __init b44_init(void) ++{ ++ return pci_module_init(&b44_driver); ++} ++ ++static void __exit b44_cleanup(void) ++{ ++ pci_unregister_driver(&b44_driver); ++} ++ ++module_init(b44_init); ++module_exit(b44_cleanup); ++ +diff -Nur linux-2.6.12.5/drivers/net/b44.h linux-2.6.12.5-brcm/drivers/net/b44.h +--- linux-2.6.12.5/drivers/net/b44.h 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/drivers/net/b44.h 2005-08-28 11:12:20.694819024 +0200 +@@ -292,6 +292,9 @@ + #define SSB_PCI_MASK1 0xfc000000 + #define SSB_PCI_MASK2 0xc0000000 + ++#define br32(REG) readl(bp->regs + (REG)) ++#define bw32(REG,VAL) writel((VAL), bp->regs + (REG)) ++ + /* 4400 PHY registers */ + #define B44_MII_AUXCTRL 24 /* Auxiliary Control */ + #define MII_AUXCTRL_DUPLEX 0x0001 /* Full Duplex */ +@@ -345,6 +348,8 @@ + }; + + #define B44_MCAST_TABLE_SIZE 32 ++#define B44_PHY_ADDR_NO_PHY 30 ++#define B44_MDC_RATIO 5000000 + + /* SW copy of device statistics, kept up to date by periodic timer + * which probes HW values. Must have same relative layout as HW +@@ -410,7 +415,7 @@ + struct net_device_stats stats; + struct b44_hw_stats hw_stats; + +- void __iomem *regs; ++ unsigned long regs; + struct pci_dev *pdev; + struct net_device *dev; + +diff -Nur linux-2.6.12.5/drivers/net/b44.h.orig linux-2.6.12.5-brcm/drivers/net/b44.h.orig +--- linux-2.6.12.5/drivers/net/b44.h.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/drivers/net/b44.h.orig 2005-08-15 02:20:18.000000000 +0200 +@@ -0,0 +1,427 @@ ++#ifndef _B44_H ++#define _B44_H ++ ++/* Register layout. (These correspond to struct _bcmenettregs in bcm4400.) */ ++#define B44_DEVCTRL 0x0000UL /* Device Control */ ++#define DEVCTRL_MPM 0x00000040 /* Magic Packet PME Enable (B0 only) */ ++#define DEVCTRL_PFE 0x00000080 /* Pattern Filtering Enable */ ++#define DEVCTRL_IPP 0x00000400 /* Internal EPHY Present */ ++#define DEVCTRL_EPR 0x00008000 /* EPHY Reset */ ++#define DEVCTRL_PME 0x00001000 /* PHY Mode Enable */ ++#define DEVCTRL_PMCE 0x00002000 /* PHY Mode Clocks Enable */ ++#define DEVCTRL_PADDR 0x0007c000 /* PHY Address */ ++#define DEVCTRL_PADDR_SHIFT 18 ++#define B44_BIST_STAT 0x000CUL /* Built-In Self-Test Status */ ++#define B44_WKUP_LEN 0x0010UL /* Wakeup Length */ ++#define WKUP_LEN_P0_MASK 0x0000007f /* Pattern 0 */ ++#define WKUP_LEN_D0 0x00000080 ++#define WKUP_LEN_P1_MASK 0x00007f00 /* Pattern 1 */ ++#define WKUP_LEN_P1_SHIFT 8 ++#define WKUP_LEN_D1 0x00008000 ++#define WKUP_LEN_P2_MASK 0x007f0000 /* Pattern 2 */ ++#define WKUP_LEN_P2_SHIFT 16 ++#define WKUP_LEN_D2 0x00000000 ++#define WKUP_LEN_P3_MASK 0x7f000000 /* Pattern 3 */ ++#define WKUP_LEN_P3_SHIFT 24 ++#define WKUP_LEN_D3 0x80000000 ++#define B44_ISTAT 0x0020UL /* Interrupt Status */ ++#define ISTAT_LS 0x00000020 /* Link Change (B0 only) */ ++#define ISTAT_PME 0x00000040 /* Power Management Event */ ++#define ISTAT_TO 0x00000080 /* General Purpose Timeout */ ++#define ISTAT_DSCE 0x00000400 /* Descriptor Error */ ++#define ISTAT_DATAE 0x00000800 /* Data Error */ ++#define ISTAT_DPE 0x00001000 /* Descr. Protocol Error */ ++#define ISTAT_RDU 0x00002000 /* Receive Descr. Underflow */ ++#define ISTAT_RFO 0x00004000 /* Receive FIFO Overflow */ ++#define ISTAT_TFU 0x00008000 /* Transmit FIFO Underflow */ ++#define ISTAT_RX 0x00010000 /* RX Interrupt */ ++#define ISTAT_TX 0x01000000 /* TX Interrupt */ ++#define ISTAT_EMAC 0x04000000 /* EMAC Interrupt */ ++#define ISTAT_MII_WRITE 0x08000000 /* MII Write Interrupt */ ++#define ISTAT_MII_READ 0x10000000 /* MII Read Interrupt */ ++#define ISTAT_ERRORS (ISTAT_DSCE|ISTAT_DATAE|ISTAT_DPE|ISTAT_RDU|ISTAT_RFO|ISTAT_TFU) ++#define B44_IMASK 0x0024UL /* Interrupt Mask */ ++#define IMASK_DEF (ISTAT_ERRORS | ISTAT_TO | ISTAT_RX | ISTAT_TX) ++#define B44_GPTIMER 0x0028UL /* General Purpose Timer */ ++#define B44_ADDR_LO 0x0088UL /* ENET Address Lo (B0 only) */ ++#define B44_ADDR_HI 0x008CUL /* ENET Address Hi (B0 only) */ ++#define B44_FILT_ADDR 0x0090UL /* ENET Filter Address */ ++#define B44_FILT_DATA 0x0094UL /* ENET Filter Data */ ++#define B44_TXBURST 0x00A0UL /* TX Max Burst Length */ ++#define B44_RXBURST 0x00A4UL /* RX Max Burst Length */ ++#define B44_MAC_CTRL 0x00A8UL /* MAC Control */ ++#define MAC_CTRL_CRC32_ENAB 0x00000001 /* CRC32 Generation Enable */ ++#define MAC_CTRL_PHY_PDOWN 0x00000004 /* Onchip EPHY Powerdown */ ++#define MAC_CTRL_PHY_EDET 0x00000008 /* Onchip EPHY Energy Detected */ ++#define MAC_CTRL_PHY_LEDCTRL 0x000000e0 /* Onchip EPHY LED Control */ ++#define MAC_CTRL_PHY_LEDCTRL_SHIFT 5 ++#define B44_MAC_FLOW 0x00ACUL /* MAC Flow Control */ ++#define MAC_FLOW_RX_HI_WATER 0x000000ff /* Receive FIFO HI Water Mark */ ++#define MAC_FLOW_PAUSE_ENAB 0x00008000 /* Enable Pause Frame Generation */ ++#define B44_RCV_LAZY 0x0100UL /* Lazy Interrupt Control */ ++#define RCV_LAZY_TO_MASK 0x00ffffff /* Timeout */ ++#define RCV_LAZY_FC_MASK 0xff000000 /* Frame Count */ ++#define RCV_LAZY_FC_SHIFT 24 ++#define B44_DMATX_CTRL 0x0200UL /* DMA TX Control */ ++#define DMATX_CTRL_ENABLE 0x00000001 /* Enable */ ++#define DMATX_CTRL_SUSPEND 0x00000002 /* Suepend Request */ ++#define DMATX_CTRL_LPBACK 0x00000004 /* Loopback Enable */ ++#define DMATX_CTRL_FAIRPRIOR 0x00000008 /* Fair Priority */ ++#define DMATX_CTRL_FLUSH 0x00000010 /* Flush Request */ ++#define B44_DMATX_ADDR 0x0204UL /* DMA TX Descriptor Ring Address */ ++#define B44_DMATX_PTR 0x0208UL /* DMA TX Last Posted Descriptor */ ++#define B44_DMATX_STAT 0x020CUL /* DMA TX Current Active Desc. + Status */ ++#define DMATX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */ ++#define DMATX_STAT_SMASK 0x0000f000 /* State Mask */ ++#define DMATX_STAT_SDISABLED 0x00000000 /* State Disabled */ ++#define DMATX_STAT_SACTIVE 0x00001000 /* State Active */ ++#define DMATX_STAT_SIDLE 0x00002000 /* State Idle Wait */ ++#define DMATX_STAT_SSTOPPED 0x00003000 /* State Stopped */ ++#define DMATX_STAT_SSUSP 0x00004000 /* State Suspend Pending */ ++#define DMATX_STAT_EMASK 0x000f0000 /* Error Mask */ ++#define DMATX_STAT_ENONE 0x00000000 /* Error None */ ++#define DMATX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */ ++#define DMATX_STAT_EDFU 0x00020000 /* Error Data FIFO Underrun */ ++#define DMATX_STAT_EBEBR 0x00030000 /* Error Bus Error on Buffer Read */ ++#define DMATX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */ ++#define DMATX_STAT_FLUSHED 0x00100000 /* Flushed */ ++#define B44_DMARX_CTRL 0x0210UL /* DMA RX Control */ ++#define DMARX_CTRL_ENABLE 0x00000001 /* Enable */ ++#define DMARX_CTRL_ROMASK 0x000000fe /* Receive Offset Mask */ ++#define DMARX_CTRL_ROSHIFT 1 /* Receive Offset Shift */ ++#define B44_DMARX_ADDR 0x0214UL /* DMA RX Descriptor Ring Address */ ++#define B44_DMARX_PTR 0x0218UL /* DMA RX Last Posted Descriptor */ ++#define B44_DMARX_STAT 0x021CUL /* DMA RX Current Active Desc. + Status */ ++#define DMARX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */ ++#define DMARX_STAT_SMASK 0x0000f000 /* State Mask */ ++#define DMARX_STAT_SDISABLED 0x00000000 /* State Disbaled */ ++#define DMARX_STAT_SACTIVE 0x00001000 /* State Active */ ++#define DMARX_STAT_SIDLE 0x00002000 /* State Idle Wait */ ++#define DMARX_STAT_SSTOPPED 0x00003000 /* State Stopped */ ++#define DMARX_STAT_EMASK 0x000f0000 /* Error Mask */ ++#define DMARX_STAT_ENONE 0x00000000 /* Error None */ ++#define DMARX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */ ++#define DMARX_STAT_EDFO 0x00020000 /* Error Data FIFO Overflow */ ++#define DMARX_STAT_EBEBW 0x00030000 /* Error Bus Error on Buffer Write */ ++#define DMARX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */ ++#define B44_DMAFIFO_AD 0x0220UL /* DMA FIFO Diag Address */ ++#define DMAFIFO_AD_OMASK 0x0000ffff /* Offset Mask */ ++#define DMAFIFO_AD_SMASK 0x000f0000 /* Select Mask */ ++#define DMAFIFO_AD_SXDD 0x00000000 /* Select Transmit DMA Data */ ++#define DMAFIFO_AD_SXDP 0x00010000 /* Select Transmit DMA Pointers */ ++#define DMAFIFO_AD_SRDD 0x00040000 /* Select Receive DMA Data */ ++#define DMAFIFO_AD_SRDP 0x00050000 /* Select Receive DMA Pointers */ ++#define DMAFIFO_AD_SXFD 0x00080000 /* Select Transmit FIFO Data */ ++#define DMAFIFO_AD_SXFP 0x00090000 /* Select Transmit FIFO Pointers */ ++#define DMAFIFO_AD_SRFD 0x000c0000 /* Select Receive FIFO Data */ ++#define DMAFIFO_AD_SRFP 0x000c0000 /* Select Receive FIFO Pointers */ ++#define B44_DMAFIFO_LO 0x0224UL /* DMA FIFO Diag Low Data */ ++#define B44_DMAFIFO_HI 0x0228UL /* DMA FIFO Diag High Data */ ++#define B44_RXCONFIG 0x0400UL /* EMAC RX Config */ ++#define RXCONFIG_DBCAST 0x00000001 /* Disable Broadcast */ ++#define RXCONFIG_ALLMULTI 0x00000002 /* Accept All Multicast */ ++#define RXCONFIG_NORX_WHILE_TX 0x00000004 /* Receive Disable While Transmitting */ ++#define RXCONFIG_PROMISC 0x00000008 /* Promiscuous Enable */ ++#define RXCONFIG_LPBACK 0x00000010 /* Loopback Enable */ ++#define RXCONFIG_FLOW 0x00000020 /* Flow Control Enable */ ++#define RXCONFIG_FLOW_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */ ++#define RXCONFIG_RFILT 0x00000080 /* Reject Filter */ ++#define B44_RXMAXLEN 0x0404UL /* EMAC RX Max Packet Length */ ++#define B44_TXMAXLEN 0x0408UL /* EMAC TX Max Packet Length */ ++#define B44_MDIO_CTRL 0x0410UL /* EMAC MDIO Control */ ++#define MDIO_CTRL_MAXF_MASK 0x0000007f /* MDC Frequency */ ++#define MDIO_CTRL_PREAMBLE 0x00000080 /* MII Preamble Enable */ ++#define B44_MDIO_DATA 0x0414UL /* EMAC MDIO Data */ ++#define MDIO_DATA_DATA 0x0000ffff /* R/W Data */ ++#define MDIO_DATA_TA_MASK 0x00030000 /* Turnaround Value */ ++#define MDIO_DATA_TA_SHIFT 16 ++#define MDIO_TA_VALID 2 ++#define MDIO_DATA_RA_MASK 0x007c0000 /* Register Address */ ++#define MDIO_DATA_RA_SHIFT 18 ++#define MDIO_DATA_PMD_MASK 0x0f800000 /* Physical Media Device */ ++#define MDIO_DATA_PMD_SHIFT 23 ++#define MDIO_DATA_OP_MASK 0x30000000 /* Opcode */ ++#define MDIO_DATA_OP_SHIFT 28 ++#define MDIO_OP_WRITE 1 ++#define MDIO_OP_READ 2 ++#define MDIO_DATA_SB_MASK 0xc0000000 /* Start Bits */ ++#define MDIO_DATA_SB_SHIFT 30 ++#define MDIO_DATA_SB_START 0x40000000 /* Start Of Frame */ ++#define B44_EMAC_IMASK 0x0418UL /* EMAC Interrupt Mask */ ++#define B44_EMAC_ISTAT 0x041CUL /* EMAC Interrupt Status */ ++#define EMAC_INT_MII 0x00000001 /* MII MDIO Interrupt */ ++#define EMAC_INT_MIB 0x00000002 /* MIB Interrupt */ ++#define EMAC_INT_FLOW 0x00000003 /* Flow Control Interrupt */ ++#define B44_CAM_DATA_LO 0x0420UL /* EMAC CAM Data Low */ ++#define B44_CAM_DATA_HI 0x0424UL /* EMAC CAM Data High */ ++#define CAM_DATA_HI_VALID 0x00010000 /* Valid Bit */ ++#define B44_CAM_CTRL 0x0428UL /* EMAC CAM Control */ ++#define CAM_CTRL_ENABLE 0x00000001 /* CAM Enable */ ++#define CAM_CTRL_MSEL 0x00000002 /* Mask Select */ ++#define CAM_CTRL_READ 0x00000004 /* Read */ ++#define CAM_CTRL_WRITE 0x00000008 /* Read */ ++#define CAM_CTRL_INDEX_MASK 0x003f0000 /* Index Mask */ ++#define CAM_CTRL_INDEX_SHIFT 16 ++#define CAM_CTRL_BUSY 0x80000000 /* CAM Busy */ ++#define B44_ENET_CTRL 0x042CUL /* EMAC ENET Control */ ++#define ENET_CTRL_ENABLE 0x00000001 /* EMAC Enable */ ++#define ENET_CTRL_DISABLE 0x00000002 /* EMAC Disable */ ++#define ENET_CTRL_SRST 0x00000004 /* EMAC Soft Reset */ ++#define ENET_CTRL_EPSEL 0x00000008 /* External PHY Select */ ++#define B44_TX_CTRL 0x0430UL /* EMAC TX Control */ ++#define TX_CTRL_DUPLEX 0x00000001 /* Full Duplex */ ++#define TX_CTRL_FMODE 0x00000002 /* Flow Mode */ ++#define TX_CTRL_SBENAB 0x00000004 /* Single Backoff Enable */ ++#define TX_CTRL_SMALL_SLOT 0x00000008 /* Small Slottime */ ++#define B44_TX_WMARK 0x0434UL /* EMAC TX Watermark */ ++#define B44_MIB_CTRL 0x0438UL /* EMAC MIB Control */ ++#define MIB_CTRL_CLR_ON_READ 0x00000001 /* Autoclear on Read */ ++#define B44_TX_GOOD_O 0x0500UL /* MIB TX Good Octets */ ++#define B44_TX_GOOD_P 0x0504UL /* MIB TX Good Packets */ ++#define B44_TX_O 0x0508UL /* MIB TX Octets */ ++#define B44_TX_P 0x050CUL /* MIB TX Packets */ ++#define B44_TX_BCAST 0x0510UL /* MIB TX Broadcast Packets */ ++#define B44_TX_MCAST 0x0514UL /* MIB TX Multicast Packets */ ++#define B44_TX_64 0x0518UL /* MIB TX <= 64 byte Packets */ ++#define B44_TX_65_127 0x051CUL /* MIB TX 65 to 127 byte Packets */ ++#define B44_TX_128_255 0x0520UL /* MIB TX 128 to 255 byte Packets */ ++#define B44_TX_256_511 0x0524UL /* MIB TX 256 to 511 byte Packets */ ++#define B44_TX_512_1023 0x0528UL /* MIB TX 512 to 1023 byte Packets */ ++#define B44_TX_1024_MAX 0x052CUL /* MIB TX 1024 to max byte Packets */ ++#define B44_TX_JABBER 0x0530UL /* MIB TX Jabber Packets */ ++#define B44_TX_OSIZE 0x0534UL /* MIB TX Oversize Packets */ ++#define B44_TX_FRAG 0x0538UL /* MIB TX Fragment Packets */ ++#define B44_TX_URUNS 0x053CUL /* MIB TX Underruns */ ++#define B44_TX_TCOLS 0x0540UL /* MIB TX Total Collisions */ ++#define B44_TX_SCOLS 0x0544UL /* MIB TX Single Collisions */ ++#define B44_TX_MCOLS 0x0548UL /* MIB TX Multiple Collisions */ ++#define B44_TX_ECOLS 0x054CUL /* MIB TX Excessive Collisions */ ++#define B44_TX_LCOLS 0x0550UL /* MIB TX Late Collisions */ ++#define B44_TX_DEFERED 0x0554UL /* MIB TX Defered Packets */ ++#define B44_TX_CLOST 0x0558UL /* MIB TX Carrier Lost */ ++#define B44_TX_PAUSE 0x055CUL /* MIB TX Pause Packets */ ++#define B44_RX_GOOD_O 0x0580UL /* MIB RX Good Octets */ ++#define B44_RX_GOOD_P 0x0584UL /* MIB RX Good Packets */ ++#define B44_RX_O 0x0588UL /* MIB RX Octets */ ++#define B44_RX_P 0x058CUL /* MIB RX Packets */ ++#define B44_RX_BCAST 0x0590UL /* MIB RX Broadcast Packets */ ++#define B44_RX_MCAST 0x0594UL /* MIB RX Multicast Packets */ ++#define B44_RX_64 0x0598UL /* MIB RX <= 64 byte Packets */ ++#define B44_RX_65_127 0x059CUL /* MIB RX 65 to 127 byte Packets */ ++#define B44_RX_128_255 0x05A0UL /* MIB RX 128 to 255 byte Packets */ ++#define B44_RX_256_511 0x05A4UL /* MIB RX 256 to 511 byte Packets */ ++#define B44_RX_512_1023 0x05A8UL /* MIB RX 512 to 1023 byte Packets */ ++#define B44_RX_1024_MAX 0x05ACUL /* MIB RX 1024 to max byte Packets */ ++#define B44_RX_JABBER 0x05B0UL /* MIB RX Jabber Packets */ ++#define B44_RX_OSIZE 0x05B4UL /* MIB RX Oversize Packets */ ++#define B44_RX_FRAG 0x05B8UL /* MIB RX Fragment Packets */ ++#define B44_RX_MISS 0x05BCUL /* MIB RX Missed Packets */ ++#define B44_RX_CRCA 0x05C0UL /* MIB RX CRC Align Errors */ ++#define B44_RX_USIZE 0x05C4UL /* MIB RX Undersize Packets */ ++#define B44_RX_CRC 0x05C8UL /* MIB RX CRC Errors */ ++#define B44_RX_ALIGN 0x05CCUL /* MIB RX Align Errors */ ++#define B44_RX_SYM 0x05D0UL /* MIB RX Symbol Errors */ ++#define B44_RX_PAUSE 0x05D4UL /* MIB RX Pause Packets */ ++#define B44_RX_NPAUSE 0x05D8UL /* MIB RX Non-Pause Packets */ ++ ++/* Silicon backplane register definitions */ ++#define B44_SBIMSTATE 0x0F90UL /* SB Initiator Agent State */ ++#define SBIMSTATE_PC 0x0000000f /* Pipe Count */ ++#define SBIMSTATE_AP_MASK 0x00000030 /* Arbitration Priority */ ++#define SBIMSTATE_AP_BOTH 0x00000000 /* Use both timeslices and token */ ++#define SBIMSTATE_AP_TS 0x00000010 /* Use timeslices only */ ++#define SBIMSTATE_AP_TK 0x00000020 /* Use token only */ ++#define SBIMSTATE_AP_RSV 0x00000030 /* Reserved */ ++#define SBIMSTATE_IBE 0x00020000 /* In Band Error */ ++#define SBIMSTATE_TO 0x00040000 /* Timeout */ ++#define B44_SBINTVEC 0x0F94UL /* SB Interrupt Mask */ ++#define SBINTVEC_PCI 0x00000001 /* Enable interrupts for PCI */ ++#define SBINTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */ ++#define SBINTVEC_ILINE20 0x00000004 /* Enable interrupts for iline20 */ ++#define SBINTVEC_CODEC 0x00000008 /* Enable interrupts for v90 codec */ ++#define SBINTVEC_USB 0x00000010 /* Enable interrupts for usb */ ++#define SBINTVEC_EXTIF 0x00000020 /* Enable interrupts for external i/f */ ++#define SBINTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */ ++#define B44_SBTMSLOW 0x0F98UL /* SB Target State Low */ ++#define SBTMSLOW_RESET 0x00000001 /* Reset */ ++#define SBTMSLOW_REJECT 0x00000002 /* Reject */ ++#define SBTMSLOW_CLOCK 0x00010000 /* Clock Enable */ ++#define SBTMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ ++#define SBTMSLOW_PE 0x40000000 /* Power Management Enable */ ++#define SBTMSLOW_BE 0x80000000 /* BIST Enable */ ++#define B44_SBTMSHIGH 0x0F9CUL /* SB Target State High */ ++#define SBTMSHIGH_SERR 0x00000001 /* S-error */ ++#define SBTMSHIGH_INT 0x00000002 /* Interrupt */ ++#define SBTMSHIGH_BUSY 0x00000004 /* Busy */ ++#define SBTMSHIGH_GCR 0x20000000 /* Gated Clock Request */ ++#define SBTMSHIGH_BISTF 0x40000000 /* BIST Failed */ ++#define SBTMSHIGH_BISTD 0x80000000 /* BIST Done */ ++#define B44_SBIDHIGH 0x0FFCUL /* SB Identification High */ ++#define SBIDHIGH_RC_MASK 0x0000000f /* Revision Code */ ++#define SBIDHIGH_CC_MASK 0x0000fff0 /* Core Code */ ++#define SBIDHIGH_CC_SHIFT 4 ++#define SBIDHIGH_VC_MASK 0xffff0000 /* Vendor Code */ ++#define SBIDHIGH_VC_SHIFT 16 ++ ++/* SSB PCI config space registers. */ ++#define SSB_BAR0_WIN 0x80 ++#define SSB_BAR1_WIN 0x84 ++#define SSB_SPROM_CONTROL 0x88 ++#define SSB_BAR1_CONTROL 0x8c ++ ++/* SSB core and host control registers. */ ++#define SSB_CONTROL 0x0000UL ++#define SSB_ARBCONTROL 0x0010UL ++#define SSB_ISTAT 0x0020UL ++#define SSB_IMASK 0x0024UL ++#define SSB_MBOX 0x0028UL ++#define SSB_BCAST_ADDR 0x0050UL ++#define SSB_BCAST_DATA 0x0054UL ++#define SSB_PCI_TRANS_0 0x0100UL ++#define SSB_PCI_TRANS_1 0x0104UL ++#define SSB_PCI_TRANS_2 0x0108UL ++#define SSB_SPROM 0x0800UL ++ ++#define SSB_PCI_MEM 0x00000000 ++#define SSB_PCI_IO 0x00000001 ++#define SSB_PCI_CFG0 0x00000002 ++#define SSB_PCI_CFG1 0x00000003 ++#define SSB_PCI_PREF 0x00000004 ++#define SSB_PCI_BURST 0x00000008 ++#define SSB_PCI_MASK0 0xfc000000 ++#define SSB_PCI_MASK1 0xfc000000 ++#define SSB_PCI_MASK2 0xc0000000 ++ ++/* 4400 PHY registers */ ++#define B44_MII_AUXCTRL 24 /* Auxiliary Control */ ++#define MII_AUXCTRL_DUPLEX 0x0001 /* Full Duplex */ ++#define MII_AUXCTRL_SPEED 0x0002 /* 1=100Mbps, 0=10Mbps */ ++#define MII_AUXCTRL_FORCED 0x0004 /* Forced 10/100 */ ++#define B44_MII_ALEDCTRL 26 /* Activity LED */ ++#define MII_ALEDCTRL_ALLMSK 0x7fff ++#define B44_MII_TLEDCTRL 27 /* Traffic Meter LED */ ++#define MII_TLEDCTRL_ENABLE 0x0040 ++ ++struct dma_desc { ++ u32 ctrl; ++ u32 addr; ++}; ++ ++/* There are only 12 bits in the DMA engine for descriptor offsetting ++ * so the table must be aligned on a boundary of this. ++ */ ++#define DMA_TABLE_BYTES 4096 ++ ++#define DESC_CTRL_LEN 0x00001fff ++#define DESC_CTRL_CMASK 0x0ff00000 /* Core specific bits */ ++#define DESC_CTRL_EOT 0x10000000 /* End of Table */ ++#define DESC_CTRL_IOC 0x20000000 /* Interrupt On Completion */ ++#define DESC_CTRL_EOF 0x40000000 /* End of Frame */ ++#define DESC_CTRL_SOF 0x80000000 /* Start of Frame */ ++ ++#define RX_COPY_THRESHOLD 256 ++ ++struct rx_header { ++ u16 len; ++ u16 flags; ++ u16 pad[12]; ++}; ++#define RX_HEADER_LEN 28 ++ ++#define RX_FLAG_OFIFO 0x00000001 /* FIFO Overflow */ ++#define RX_FLAG_CRCERR 0x00000002 /* CRC Error */ ++#define RX_FLAG_SERR 0x00000004 /* Receive Symbol Error */ ++#define RX_FLAG_ODD 0x00000008 /* Frame has odd number of nibbles */ ++#define RX_FLAG_LARGE 0x00000010 /* Frame is > RX MAX Length */ ++#define RX_FLAG_MCAST 0x00000020 /* Dest is Multicast Address */ ++#define RX_FLAG_BCAST 0x00000040 /* Dest is Broadcast Address */ ++#define RX_FLAG_MISS 0x00000080 /* Received due to promisc mode */ ++#define RX_FLAG_LAST 0x00000800 /* Last buffer in frame */ ++#define RX_FLAG_ERRORS (RX_FLAG_ODD | RX_FLAG_SERR | RX_FLAG_CRCERR | RX_FLAG_OFIFO) ++ ++struct ring_info { ++ struct sk_buff *skb; ++ DECLARE_PCI_UNMAP_ADDR(mapping); ++}; ++ ++#define B44_MCAST_TABLE_SIZE 32 ++ ++/* SW copy of device statistics, kept up to date by periodic timer ++ * which probes HW values. Must have same relative layout as HW ++ * register above, because b44_stats_update depends upon this. ++ */ ++struct b44_hw_stats { ++ u32 tx_good_octets, tx_good_pkts, tx_octets; ++ u32 tx_pkts, tx_broadcast_pkts, tx_multicast_pkts; ++ u32 tx_len_64, tx_len_65_to_127, tx_len_128_to_255; ++ u32 tx_len_256_to_511, tx_len_512_to_1023, tx_len_1024_to_max; ++ u32 tx_jabber_pkts, tx_oversize_pkts, tx_fragment_pkts; ++ u32 tx_underruns, tx_total_cols, tx_single_cols; ++ u32 tx_multiple_cols, tx_excessive_cols, tx_late_cols; ++ u32 tx_defered, tx_carrier_lost, tx_pause_pkts; ++ u32 __pad1[8]; ++ ++ u32 rx_good_octets, rx_good_pkts, rx_octets; ++ u32 rx_pkts, rx_broadcast_pkts, rx_multicast_pkts; ++ u32 rx_len_64, rx_len_65_to_127, rx_len_128_to_255; ++ u32 rx_len_256_to_511, rx_len_512_to_1023, rx_len_1024_to_max; ++ u32 rx_jabber_pkts, rx_oversize_pkts, rx_fragment_pkts; ++ u32 rx_missed_pkts, rx_crc_align_errs, rx_undersize; ++ u32 rx_crc_errs, rx_align_errs, rx_symbol_errs; ++ u32 rx_pause_pkts, rx_nonpause_pkts; ++}; ++ ++struct b44 { ++ spinlock_t lock; ++ ++ u32 imask, istat; ++ ++ struct dma_desc *rx_ring, *tx_ring; ++ ++ u32 tx_prod, tx_cons; ++ u32 rx_prod, rx_cons; ++ ++ struct ring_info *rx_buffers; ++ struct ring_info *tx_buffers; ++ ++ u32 dma_offset; ++ u32 flags; ++#define B44_FLAG_INIT_COMPLETE 0x00000001 ++#define B44_FLAG_BUGGY_TXPTR 0x00000002 ++#define B44_FLAG_REORDER_BUG 0x00000004 ++#define B44_FLAG_PAUSE_AUTO 0x00008000 ++#define B44_FLAG_FULL_DUPLEX 0x00010000 ++#define B44_FLAG_100_BASE_T 0x00020000 ++#define B44_FLAG_TX_PAUSE 0x00040000 ++#define B44_FLAG_RX_PAUSE 0x00080000 ++#define B44_FLAG_FORCE_LINK 0x00100000 ++#define B44_FLAG_ADV_10HALF 0x01000000 ++#define B44_FLAG_ADV_10FULL 0x02000000 ++#define B44_FLAG_ADV_100HALF 0x04000000 ++#define B44_FLAG_ADV_100FULL 0x08000000 ++#define B44_FLAG_INTERNAL_PHY 0x10000000 ++ ++ u32 rx_offset; ++ ++ u32 msg_enable; ++ ++ struct timer_list timer; ++ ++ struct net_device_stats stats; ++ struct b44_hw_stats hw_stats; ++ ++ void __iomem *regs; ++ struct pci_dev *pdev; ++ struct net_device *dev; ++ ++ dma_addr_t rx_ring_dma, tx_ring_dma; ++ ++ u32 rx_pending; ++ u32 tx_pending; ++ u8 phy_addr; ++ u8 core_unit; ++ ++ struct mii_if_info mii_if; ++}; ++ ++#endif /* _B44_H */ +diff -Nur linux-2.6.12.5/include/asm-mips/bootinfo.h linux-2.6.12.5-brcm/include/asm-mips/bootinfo.h +--- linux-2.6.12.5/include/asm-mips/bootinfo.h 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/include/asm-mips/bootinfo.h 2005-08-28 11:12:20.695818872 +0200 +@@ -213,6 +213,12 @@ + #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ + #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ + ++/* ++ * Valid machtype for group Broadcom ++ */ ++#define MACH_GROUP_BRCM 23 /* Broadcom */ ++#define MACH_BCM47XX 1 /* Broadcom BCM47xx */ ++ + #define CL_SIZE COMMAND_LINE_SIZE + + const char *get_system_type(void); +diff -Nur linux-2.6.12.5/include/asm-mips/cpu.h linux-2.6.12.5-brcm/include/asm-mips/cpu.h +--- linux-2.6.12.5/include/asm-mips/cpu.h 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/include/asm-mips/cpu.h 2005-08-28 11:12:20.695818872 +0200 +@@ -87,6 +87,13 @@ + #define PRID_IMP_SR71000 0x0400 + + /* ++ * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM ++ */ ++ ++#define PRID_IMP_BCM4710 0x4000 ++#define PRID_IMP_BCM3302 0x9000 ++ ++/* + * Definitions for 7:0 on legacy processors + */ + +@@ -177,7 +184,9 @@ + #define CPU_VR4133 56 + #define CPU_AU1550 57 + #define CPU_24K 58 +-#define CPU_LAST 58 ++#define CPU_BCM3302 59 ++#define CPU_BCM4710 60 ++#define CPU_LAST 60 + + /* + * ISA Level encodings +diff -Nur linux-2.6.12.5/include/asm-mips/mipsregs.h linux-2.6.12.5-brcm/include/asm-mips/mipsregs.h +--- linux-2.6.12.5/include/asm-mips/mipsregs.h 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/include/asm-mips/mipsregs.h 2005-08-28 11:12:20.722814768 +0200 +@@ -790,10 +790,18 @@ + #define read_c0_config1() __read_32bit_c0_register($16, 1) + #define read_c0_config2() __read_32bit_c0_register($16, 2) + #define read_c0_config3() __read_32bit_c0_register($16, 3) ++#define read_c0_config4() __read_32bit_c0_register($16, 4) ++#define read_c0_config5() __read_32bit_c0_register($16, 5) ++#define read_c0_config6() __read_32bit_c0_register($16, 6) ++#define read_c0_config7() __read_32bit_c0_register($16, 7) + #define write_c0_config(val) __write_32bit_c0_register($16, 0, val) + #define write_c0_config1(val) __write_32bit_c0_register($16, 1, val) + #define write_c0_config2(val) __write_32bit_c0_register($16, 2, val) + #define write_c0_config3(val) __write_32bit_c0_register($16, 3, val) ++#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val) ++#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val) ++#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val) ++#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val) + + /* + * The WatchLo register. There may be upto 8 of them. +diff -Nur linux-2.6.12.5/include/linux/init.h linux-2.6.12.5-brcm/include/linux/init.h +--- linux-2.6.12.5/include/linux/init.h 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/include/linux/init.h 2005-08-28 11:12:20.723814616 +0200 +@@ -86,6 +86,8 @@ + static initcall_t __initcall_##fn __attribute_used__ \ + __attribute__((__section__(".initcall" level ".init"))) = fn + ++#define early_initcall(fn) __define_initcall(".early1",fn) ++ + #define core_initcall(fn) __define_initcall("1",fn) + #define postcore_initcall(fn) __define_initcall("2",fn) + #define arch_initcall(fn) __define_initcall("3",fn) +diff -Nur linux-2.6.12.5/include/linux/pci_ids.h linux-2.6.12.5-brcm/include/linux/pci_ids.h +--- linux-2.6.12.5/include/linux/pci_ids.h 2005-08-15 02:20:18.000000000 +0200 ++++ linux-2.6.12.5-brcm/include/linux/pci_ids.h 2005-08-28 11:12:20.726814160 +0200 +@@ -2110,6 +2110,7 @@ + #define PCI_DEVICE_ID_TIGON3_5901_2 0x170e + #define PCI_DEVICE_ID_BCM4401 0x4401 + #define PCI_DEVICE_ID_BCM4401B0 0x4402 ++#define PCI_DEVICE_ID_BCM4713 0x4713 + + #define PCI_VENDOR_ID_TOPIC 0x151f + #define PCI_DEVICE_ID_TOPIC_TP560 0x0000 +diff -Nur linux-2.6.12.5/include/linux/pci_ids.h.orig linux-2.6.12.5-brcm/include/linux/pci_ids.h.orig +--- linux-2.6.12.5/include/linux/pci_ids.h.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12.5-brcm/include/linux/pci_ids.h.orig 2005-08-15 02:20:18.000000000 +0200 +@@ -0,0 +1,2609 @@ ++/* ++ * PCI Class, Vendor and Device IDs ++ * ++ * Please keep sorted. ++ */ ++ ++/* Device classes and subclasses */ ++ ++#define PCI_CLASS_NOT_DEFINED 0x0000 ++#define PCI_CLASS_NOT_DEFINED_VGA 0x0001 ++ ++#define PCI_BASE_CLASS_STORAGE 0x01 ++#define PCI_CLASS_STORAGE_SCSI 0x0100 ++#define PCI_CLASS_STORAGE_IDE 0x0101 ++#define PCI_CLASS_STORAGE_FLOPPY 0x0102 ++#define PCI_CLASS_STORAGE_IPI 0x0103 ++#define PCI_CLASS_STORAGE_RAID 0x0104 ++#define PCI_CLASS_STORAGE_OTHER 0x0180 ++ ++#define PCI_BASE_CLASS_NETWORK 0x02 ++#define PCI_CLASS_NETWORK_ETHERNET 0x0200 ++#define PCI_CLASS_NETWORK_TOKEN_RING 0x0201 ++#define PCI_CLASS_NETWORK_FDDI 0x0202 ++#define PCI_CLASS_NETWORK_ATM 0x0203 ++#define PCI_CLASS_NETWORK_OTHER 0x0280 ++ ++#define PCI_BASE_CLASS_DISPLAY 0x03 ++#define PCI_CLASS_DISPLAY_VGA 0x0300 ++#define PCI_CLASS_DISPLAY_XGA 0x0301 ++#define PCI_CLASS_DISPLAY_3D 0x0302 ++#define PCI_CLASS_DISPLAY_OTHER 0x0380 ++ ++#define PCI_BASE_CLASS_MULTIMEDIA 0x04 ++#define PCI_CLASS_MULTIMEDIA_VIDEO 0x0400 ++#define PCI_CLASS_MULTIMEDIA_AUDIO 0x0401 ++#define PCI_CLASS_MULTIMEDIA_PHONE 0x0402 ++#define PCI_CLASS_MULTIMEDIA_OTHER 0x0480 ++ ++#define PCI_BASE_CLASS_MEMORY 0x05 ++#define PCI_CLASS_MEMORY_RAM 0x0500 ++#define PCI_CLASS_MEMORY_FLASH 0x0501 ++#define PCI_CLASS_MEMORY_OTHER 0x0580 ++ ++#define PCI_BASE_CLASS_BRIDGE 0x06 ++#define PCI_CLASS_BRIDGE_HOST 0x0600 ++#define PCI_CLASS_BRIDGE_ISA 0x0601 ++#define PCI_CLASS_BRIDGE_EISA 0x0602 ++#define PCI_CLASS_BRIDGE_MC 0x0603 ++#define PCI_CLASS_BRIDGE_PCI 0x0604 ++#define PCI_CLASS_BRIDGE_PCMCIA 0x0605 ++#define PCI_CLASS_BRIDGE_NUBUS 0x0606 ++#define PCI_CLASS_BRIDGE_CARDBUS 0x0607 ++#define PCI_CLASS_BRIDGE_RACEWAY 0x0608 ++#define PCI_CLASS_BRIDGE_OTHER 0x0680 ++ ++#define PCI_BASE_CLASS_COMMUNICATION 0x07 ++#define PCI_CLASS_COMMUNICATION_SERIAL 0x0700 ++#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701 ++#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702 ++#define PCI_CLASS_COMMUNICATION_MODEM 0x0703 ++#define PCI_CLASS_COMMUNICATION_OTHER 0x0780 ++ ++#define PCI_BASE_CLASS_SYSTEM 0x08 ++#define PCI_CLASS_SYSTEM_PIC 0x0800 ++#define PCI_CLASS_SYSTEM_DMA 0x0801 ++#define PCI_CLASS_SYSTEM_TIMER 0x0802 ++#define PCI_CLASS_SYSTEM_RTC 0x0803 ++#define PCI_CLASS_SYSTEM_PCI_HOTPLUG 0x0804 ++#define PCI_CLASS_SYSTEM_OTHER 0x0880 ++ ++#define PCI_BASE_CLASS_INPUT 0x09 ++#define PCI_CLASS_INPUT_KEYBOARD 0x0900 ++#define PCI_CLASS_INPUT_PEN 0x0901 ++#define PCI_CLASS_INPUT_MOUSE 0x0902 ++#define PCI_CLASS_INPUT_SCANNER 0x0903 ++#define PCI_CLASS_INPUT_GAMEPORT 0x0904 ++#define PCI_CLASS_INPUT_OTHER 0x0980 ++ ++#define PCI_BASE_CLASS_DOCKING 0x0a ++#define PCI_CLASS_DOCKING_GENERIC 0x0a00 ++#define PCI_CLASS_DOCKING_OTHER 0x0a80 ++ ++#define PCI_BASE_CLASS_PROCESSOR 0x0b ++#define PCI_CLASS_PROCESSOR_386 0x0b00 ++#define PCI_CLASS_PROCESSOR_486 0x0b01 ++#define PCI_CLASS_PROCESSOR_PENTIUM 0x0b02 ++#define PCI_CLASS_PROCESSOR_ALPHA 0x0b10 ++#define PCI_CLASS_PROCESSOR_POWERPC 0x0b20 ++#define PCI_CLASS_PROCESSOR_MIPS 0x0b30 ++#define PCI_CLASS_PROCESSOR_CO 0x0b40 ++ ++#define PCI_BASE_CLASS_SERIAL 0x0c ++#define PCI_CLASS_SERIAL_FIREWIRE 0x0c00 ++#define PCI_CLASS_SERIAL_ACCESS 0x0c01 ++#define PCI_CLASS_SERIAL_SSA 0x0c02 ++#define PCI_CLASS_SERIAL_USB 0x0c03 ++#define PCI_CLASS_SERIAL_FIBER 0x0c04 ++#define PCI_CLASS_SERIAL_SMBUS 0x0c05 ++ ++#define PCI_BASE_CLASS_INTELLIGENT 0x0e ++#define PCI_CLASS_INTELLIGENT_I2O 0x0e00 ++ ++#define PCI_BASE_CLASS_SATELLITE 0x0f ++#define PCI_CLASS_SATELLITE_TV 0x0f00 ++#define PCI_CLASS_SATELLITE_AUDIO 0x0f01 ++#define PCI_CLASS_SATELLITE_VOICE 0x0f03 ++#define PCI_CLASS_SATELLITE_DATA 0x0f04 ++ ++#define PCI_BASE_CLASS_CRYPT 0x10 ++#define PCI_CLASS_CRYPT_NETWORK 0x1000 ++#define PCI_CLASS_CRYPT_ENTERTAINMENT 0x1001 ++#define PCI_CLASS_CRYPT_OTHER 0x1080 ++ ++#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11 ++#define PCI_CLASS_SP_DPIO 0x1100 ++#define PCI_CLASS_SP_OTHER 0x1180 ++ ++#define PCI_CLASS_OTHERS 0xff ++ ++/* Vendors and devices. Sort key: vendor first, device next. */ ++ ++#define PCI_VENDOR_ID_DYNALINK 0x0675 ++#define PCI_DEVICE_ID_DYNALINK_IS64PH 0x1702 ++ ++#define PCI_VENDOR_ID_BERKOM 0x0871 ++#define PCI_DEVICE_ID_BERKOM_A1T 0xffa1 ++#define PCI_DEVICE_ID_BERKOM_T_CONCEPT 0xffa2 ++#define PCI_DEVICE_ID_BERKOM_A4T 0xffa4 ++#define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO 0xffa8 ++ ++#define PCI_VENDOR_ID_COMPAQ 0x0e11 ++#define PCI_DEVICE_ID_COMPAQ_TOKENRING 0x0508 ++#define PCI_DEVICE_ID_COMPAQ_1280 0x3033 ++#define PCI_DEVICE_ID_COMPAQ_TRIFLEX 0x4000 ++#define PCI_DEVICE_ID_COMPAQ_6010 0x6010 ++#define PCI_DEVICE_ID_COMPAQ_TACHYON 0xa0fc ++#define PCI_DEVICE_ID_COMPAQ_SMART2P 0xae10 ++#define PCI_DEVICE_ID_COMPAQ_NETEL100 0xae32 ++#define PCI_DEVICE_ID_COMPAQ_NETEL10 0xae34 ++#define PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE 0xae33 ++#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I 0xae35 ++#define PCI_DEVICE_ID_COMPAQ_NETEL100D 0xae40 ++#define PCI_DEVICE_ID_COMPAQ_NETEL100PI 0xae43 ++#define PCI_DEVICE_ID_COMPAQ_NETEL100I 0xb011 ++#define PCI_DEVICE_ID_COMPAQ_CISS 0xb060 ++#define PCI_DEVICE_ID_COMPAQ_CISSB 0xb178 ++#define PCI_DEVICE_ID_COMPAQ_CISSC 0x46 ++#define PCI_DEVICE_ID_COMPAQ_THUNDER 0xf130 ++#define PCI_DEVICE_ID_COMPAQ_NETFLEX3B 0xf150 ++ ++#define PCI_VENDOR_ID_NCR 0x1000 ++#define PCI_VENDOR_ID_LSI_LOGIC 0x1000 ++#define PCI_DEVICE_ID_NCR_53C810 0x0001 ++#define PCI_DEVICE_ID_NCR_53C820 0x0002 ++#define PCI_DEVICE_ID_NCR_53C825 0x0003 ++#define PCI_DEVICE_ID_NCR_53C815 0x0004 ++#define PCI_DEVICE_ID_LSI_53C810AP 0x0005 ++#define PCI_DEVICE_ID_NCR_53C860 0x0006 ++#define PCI_DEVICE_ID_LSI_53C1510 0x000a ++#define PCI_DEVICE_ID_NCR_53C896 0x000b ++#define PCI_DEVICE_ID_NCR_53C895 0x000c ++#define PCI_DEVICE_ID_NCR_53C885 0x000d ++#define PCI_DEVICE_ID_NCR_53C875 0x000f ++#define PCI_DEVICE_ID_NCR_53C1510 0x0010 ++#define PCI_DEVICE_ID_LSI_53C895A 0x0012 ++#define PCI_DEVICE_ID_LSI_53C875A 0x0013 ++#define PCI_DEVICE_ID_LSI_53C1010_33 0x0020 ++#define PCI_DEVICE_ID_LSI_53C1010_66 0x0021 ++#define PCI_DEVICE_ID_LSI_53C1030 0x0030 ++#define PCI_DEVICE_ID_LSI_1030_53C1035 0x0032 ++#define PCI_DEVICE_ID_LSI_53C1035 0x0040 ++#define PCI_DEVICE_ID_NCR_53C875J 0x008f ++#define PCI_DEVICE_ID_LSI_FC909 0x0621 ++#define PCI_DEVICE_ID_LSI_FC929 0x0622 ++#define PCI_DEVICE_ID_LSI_FC929_LAN 0x0623 ++#define PCI_DEVICE_ID_LSI_FC919 0x0624 ++#define PCI_DEVICE_ID_LSI_FC919_LAN 0x0625 ++#define PCI_DEVICE_ID_LSI_FC929X 0x0626 ++#define PCI_DEVICE_ID_LSI_FC939X 0x0642 ++#define PCI_DEVICE_ID_LSI_FC949X 0x0640 ++#define PCI_DEVICE_ID_LSI_FC919X 0x0628 ++#define PCI_DEVICE_ID_NCR_YELLOWFIN 0x0701 ++#define PCI_DEVICE_ID_LSI_61C102 0x0901 ++#define PCI_DEVICE_ID_LSI_63C815 0x1000 ++#define PCI_DEVICE_ID_LSI_SAS1064 0x0050 ++#define PCI_DEVICE_ID_LSI_SAS1066 0x005E ++#define PCI_DEVICE_ID_LSI_SAS1068 0x0054 ++#define PCI_DEVICE_ID_LSI_SAS1064A 0x005C ++#define PCI_DEVICE_ID_LSI_SAS1064E 0x0056 ++#define PCI_DEVICE_ID_LSI_SAS1066E 0x005A ++#define PCI_DEVICE_ID_LSI_SAS1068E 0x0058 ++#define PCI_DEVICE_ID_LSI_SAS1078 0x0060 ++ ++#define PCI_VENDOR_ID_ATI 0x1002 ++/* Mach64 */ ++#define PCI_DEVICE_ID_ATI_68800 0x4158 ++#define PCI_DEVICE_ID_ATI_215CT222 0x4354 ++#define PCI_DEVICE_ID_ATI_210888CX 0x4358 ++#define PCI_DEVICE_ID_ATI_215ET222 0x4554 ++/* Mach64 / Rage */ ++#define PCI_DEVICE_ID_ATI_215GB 0x4742 ++#define PCI_DEVICE_ID_ATI_215GD 0x4744 ++#define PCI_DEVICE_ID_ATI_215GI 0x4749 ++#define PCI_DEVICE_ID_ATI_215GP 0x4750 ++#define PCI_DEVICE_ID_ATI_215GQ 0x4751 ++#define PCI_DEVICE_ID_ATI_215XL 0x4752 ++#define PCI_DEVICE_ID_ATI_215GT 0x4754 ++#define PCI_DEVICE_ID_ATI_215GTB 0x4755 ++#define PCI_DEVICE_ID_ATI_215_IV 0x4756 ++#define PCI_DEVICE_ID_ATI_215_IW 0x4757 ++#define PCI_DEVICE_ID_ATI_215_IZ 0x475A ++#define PCI_DEVICE_ID_ATI_210888GX 0x4758 ++#define PCI_DEVICE_ID_ATI_215_LB 0x4c42 ++#define PCI_DEVICE_ID_ATI_215_LD 0x4c44 ++#define PCI_DEVICE_ID_ATI_215_LG 0x4c47 ++#define PCI_DEVICE_ID_ATI_215_LI 0x4c49 ++#define PCI_DEVICE_ID_ATI_215_LM 0x4c4D ++#define PCI_DEVICE_ID_ATI_215_LN 0x4c4E ++#define PCI_DEVICE_ID_ATI_215_LR 0x4c52 ++#define PCI_DEVICE_ID_ATI_215_LS 0x4c53 ++#define PCI_DEVICE_ID_ATI_264_LT 0x4c54 ++/* Mach64 VT */ ++#define PCI_DEVICE_ID_ATI_264VT 0x5654 ++#define PCI_DEVICE_ID_ATI_264VU 0x5655 ++#define PCI_DEVICE_ID_ATI_264VV 0x5656 ++/* Rage128 GL */ ++#define PCI_DEVICE_ID_ATI_RAGE128_RE 0x5245 ++#define PCI_DEVICE_ID_ATI_RAGE128_RF 0x5246 ++#define PCI_DEVICE_ID_ATI_RAGE128_RG 0x5247 ++/* Rage128 VR */ ++#define PCI_DEVICE_ID_ATI_RAGE128_RK 0x524b ++#define PCI_DEVICE_ID_ATI_RAGE128_RL 0x524c ++#define PCI_DEVICE_ID_ATI_RAGE128_SE 0x5345 ++#define PCI_DEVICE_ID_ATI_RAGE128_SF 0x5346 ++#define PCI_DEVICE_ID_ATI_RAGE128_SG 0x5347 ++#define PCI_DEVICE_ID_ATI_RAGE128_SH 0x5348 ++#define PCI_DEVICE_ID_ATI_RAGE128_SK 0x534b ++#define PCI_DEVICE_ID_ATI_RAGE128_SL 0x534c ++#define PCI_DEVICE_ID_ATI_RAGE128_SM 0x534d ++#define PCI_DEVICE_ID_ATI_RAGE128_SN 0x534e ++/* Rage128 Ultra */ ++#define PCI_DEVICE_ID_ATI_RAGE128_TF 0x5446 ++#define PCI_DEVICE_ID_ATI_RAGE128_TL 0x544c ++#define PCI_DEVICE_ID_ATI_RAGE128_TR 0x5452 ++#define PCI_DEVICE_ID_ATI_RAGE128_TS 0x5453 ++#define PCI_DEVICE_ID_ATI_RAGE128_TT 0x5454 ++#define PCI_DEVICE_ID_ATI_RAGE128_TU 0x5455 ++/* Rage128 M3 */ ++#define PCI_DEVICE_ID_ATI_RAGE128_LE 0x4c45 ++#define PCI_DEVICE_ID_ATI_RAGE128_LF 0x4c46 ++/* Rage128 M4 */ ++#define PCI_DEVICE_ID_ATI_RAGE128_MF 0x4d46 ++#define PCI_DEVICE_ID_ATI_RAGE128_ML 0x4d4c ++/* Rage128 Pro GL */ ++#define PCI_DEVICE_ID_ATI_RAGE128_PA 0x5041 ++#define PCI_DEVICE_ID_ATI_RAGE128_PB 0x5042 ++#define PCI_DEVICE_ID_ATI_RAGE128_PC 0x5043 ++#define PCI_DEVICE_ID_ATI_RAGE128_PD 0x5044 ++#define PCI_DEVICE_ID_ATI_RAGE128_PE 0x5045 ++#define PCI_DEVICE_ID_ATI_RAGE128_PF 0x5046 ++/* Rage128 Pro VR */ ++#define PCI_DEVICE_ID_ATI_RAGE128_PG 0x5047 ++#define PCI_DEVICE_ID_ATI_RAGE128_PH 0x5048 ++#define PCI_DEVICE_ID_ATI_RAGE128_PI 0x5049 ++#define PCI_DEVICE_ID_ATI_RAGE128_PJ 0x504A ++#define PCI_DEVICE_ID_ATI_RAGE128_PK 0x504B ++#define PCI_DEVICE_ID_ATI_RAGE128_PL 0x504C ++#define PCI_DEVICE_ID_ATI_RAGE128_PM 0x504D ++#define PCI_DEVICE_ID_ATI_RAGE128_PN 0x504E ++#define PCI_DEVICE_ID_ATI_RAGE128_PO 0x504F ++#define PCI_DEVICE_ID_ATI_RAGE128_PP 0x5050 ++#define PCI_DEVICE_ID_ATI_RAGE128_PQ 0x5051 ++#define PCI_DEVICE_ID_ATI_RAGE128_PR 0x5052 ++#define PCI_DEVICE_ID_ATI_RAGE128_TR 0x5452 ++#define PCI_DEVICE_ID_ATI_RAGE128_PS 0x5053 ++#define PCI_DEVICE_ID_ATI_RAGE128_PT 0x5054 ++#define PCI_DEVICE_ID_ATI_RAGE128_PU 0x5055 ++#define PCI_DEVICE_ID_ATI_RAGE128_PV 0x5056 ++#define PCI_DEVICE_ID_ATI_RAGE128_PW 0x5057 ++#define PCI_DEVICE_ID_ATI_RAGE128_PX 0x5058 ++/* Rage128 M4 */ ++#define PCI_DEVICE_ID_ATI_RADEON_LE 0x4d45 ++#define PCI_DEVICE_ID_ATI_RADEON_LF 0x4d46 ++/* Radeon R100 */ ++#define PCI_DEVICE_ID_ATI_RADEON_QD 0x5144 ++#define PCI_DEVICE_ID_ATI_RADEON_QE 0x5145 ++#define PCI_DEVICE_ID_ATI_RADEON_QF 0x5146 ++#define PCI_DEVICE_ID_ATI_RADEON_QG 0x5147 ++/* Radeon RV100 (VE) */ ++#define PCI_DEVICE_ID_ATI_RADEON_QY 0x5159 ++#define PCI_DEVICE_ID_ATI_RADEON_QZ 0x515a ++/* Radeon R200 (8500) */ ++#define PCI_DEVICE_ID_ATI_RADEON_QL 0x514c ++#define PCI_DEVICE_ID_ATI_RADEON_QN 0x514e ++#define PCI_DEVICE_ID_ATI_RADEON_QO 0x514f ++#define PCI_DEVICE_ID_ATI_RADEON_Ql 0x516c ++#define PCI_DEVICE_ID_ATI_RADEON_BB 0x4242 ++/* Radeon R200 (9100) */ ++#define PCI_DEVICE_ID_ATI_RADEON_QM 0x514d ++/* Radeon RV200 (7500) */ ++#define PCI_DEVICE_ID_ATI_RADEON_QW 0x5157 ++#define PCI_DEVICE_ID_ATI_RADEON_QX 0x5158 ++/* Radeon NV-100 */ ++#define PCI_DEVICE_ID_ATI_RADEON_N1 0x5159 ++#define PCI_DEVICE_ID_ATI_RADEON_N2 0x515a ++/* Radeon RV250 (9000) */ ++#define PCI_DEVICE_ID_ATI_RADEON_Id 0x4964 ++#define PCI_DEVICE_ID_ATI_RADEON_Ie 0x4965 ++#define PCI_DEVICE_ID_ATI_RADEON_If 0x4966 ++#define PCI_DEVICE_ID_ATI_RADEON_Ig 0x4967 ++/* Radeon RV280 (9200) */ ++#define PCI_DEVICE_ID_ATI_RADEON_Y_ 0x5960 ++#define PCI_DEVICE_ID_ATI_RADEON_Ya 0x5961 ++#define PCI_DEVICE_ID_ATI_RADEON_Yd 0x5964 ++/* Radeon R300 (9500) */ ++#define PCI_DEVICE_ID_ATI_RADEON_AD 0x4144 ++/* Radeon R300 (9700) */ ++#define PCI_DEVICE_ID_ATI_RADEON_ND 0x4e44 ++#define PCI_DEVICE_ID_ATI_RADEON_NE 0x4e45 ++#define PCI_DEVICE_ID_ATI_RADEON_NF 0x4e46 ++#define PCI_DEVICE_ID_ATI_RADEON_NG 0x4e47 ++#define PCI_DEVICE_ID_ATI_RADEON_AE 0x4145 ++#define PCI_DEVICE_ID_ATI_RADEON_AF 0x4146 ++/* Radeon R350 (9800) */ ++#define PCI_DEVICE_ID_ATI_RADEON_NH 0x4e48 ++#define PCI_DEVICE_ID_ATI_RADEON_NI 0x4e49 ++/* Radeon RV350 (9600) */ ++#define PCI_DEVICE_ID_ATI_RADEON_AP 0x4150 ++#define PCI_DEVICE_ID_ATI_RADEON_AR 0x4152 ++/* Radeon M6 */ ++#define PCI_DEVICE_ID_ATI_RADEON_LY 0x4c59 ++#define PCI_DEVICE_ID_ATI_RADEON_LZ 0x4c5a ++/* Radeon M7 */ ++#define PCI_DEVICE_ID_ATI_RADEON_LW 0x4c57 ++#define PCI_DEVICE_ID_ATI_RADEON_LX 0x4c58 ++/* Radeon M9 */ ++#define PCI_DEVICE_ID_ATI_RADEON_Ld 0x4c64 ++#define PCI_DEVICE_ID_ATI_RADEON_Le 0x4c65 ++#define PCI_DEVICE_ID_ATI_RADEON_Lf 0x4c66 ++#define PCI_DEVICE_ID_ATI_RADEON_Lg 0x4c67 ++/* Radeon */ ++#define PCI_DEVICE_ID_ATI_RADEON_RA 0x5144 ++#define PCI_DEVICE_ID_ATI_RADEON_RB 0x5145 ++#define PCI_DEVICE_ID_ATI_RADEON_RC 0x5146 ++#define PCI_DEVICE_ID_ATI_RADEON_RD 0x5147 ++/* RadeonIGP */ ++#define PCI_DEVICE_ID_ATI_RS100 0xcab0 ++#define PCI_DEVICE_ID_ATI_RS200 0xcab2 ++#define PCI_DEVICE_ID_ATI_RS200_B 0xcbb2 ++#define PCI_DEVICE_ID_ATI_RS250 0xcab3 ++#define PCI_DEVICE_ID_ATI_RS300_100 0x5830 ++#define PCI_DEVICE_ID_ATI_RS300_133 0x5831 ++#define PCI_DEVICE_ID_ATI_RS300_166 0x5832 ++#define PCI_DEVICE_ID_ATI_RS300_200 0x5833 ++#define PCI_DEVICE_ID_ATI_RS350_100 0x7830 ++#define PCI_DEVICE_ID_ATI_RS350_133 0x7831 ++#define PCI_DEVICE_ID_ATI_RS350_166 0x7832 ++#define PCI_DEVICE_ID_ATI_RS350_200 0x7833 ++#define PCI_DEVICE_ID_ATI_RS400_100 0x5a30 ++#define PCI_DEVICE_ID_ATI_RS400_133 0x5a31 ++#define PCI_DEVICE_ID_ATI_RS400_166 0x5a32 ++#define PCI_DEVICE_ID_ATI_RS400_200 0x5a33 ++#define PCI_DEVICE_ID_ATI_RS480 0x5950 ++/* ATI IXP Chipset */ ++#define PCI_DEVICE_ID_ATI_IXP200_IDE 0x4349 ++#define PCI_DEVICE_ID_ATI_IXP300_IDE 0x4369 ++#define PCI_DEVICE_ID_ATI_IXP300_SATA 0x436e ++#define PCI_DEVICE_ID_ATI_IXP400_IDE 0x4376 ++#define PCI_DEVICE_ID_ATI_IXP400_SATA 0x4379 ++ ++#define PCI_VENDOR_ID_VLSI 0x1004 ++#define PCI_DEVICE_ID_VLSI_82C592 0x0005 ++#define PCI_DEVICE_ID_VLSI_82C593 0x0006 ++#define PCI_DEVICE_ID_VLSI_82C594 0x0007 ++#define PCI_DEVICE_ID_VLSI_82C597 0x0009 ++#define PCI_DEVICE_ID_VLSI_82C541 0x000c ++#define PCI_DEVICE_ID_VLSI_82C543 0x000d ++#define PCI_DEVICE_ID_VLSI_82C532 0x0101 ++#define PCI_DEVICE_ID_VLSI_82C534 0x0102 ++#define PCI_DEVICE_ID_VLSI_82C535 0x0104 ++#define PCI_DEVICE_ID_VLSI_82C147 0x0105 ++#define PCI_DEVICE_ID_VLSI_VAS96011 0x0702 ++ ++#define PCI_VENDOR_ID_ADL 0x1005 ++#define PCI_DEVICE_ID_ADL_2301 0x2301 ++ ++#define PCI_VENDOR_ID_NS 0x100b ++#define PCI_DEVICE_ID_NS_87415 0x0002 ++#define PCI_DEVICE_ID_NS_87560_LIO 0x000e ++#define PCI_DEVICE_ID_NS_87560_USB 0x0012 ++#define PCI_DEVICE_ID_NS_83815 0x0020 ++#define PCI_DEVICE_ID_NS_83820 0x0022 ++#define PCI_DEVICE_ID_NS_SCx200_BRIDGE 0x0500 ++#define PCI_DEVICE_ID_NS_SCx200_SMI 0x0501 ++#define PCI_DEVICE_ID_NS_SCx200_IDE 0x0502 ++#define PCI_DEVICE_ID_NS_SCx200_AUDIO 0x0503 ++#define PCI_DEVICE_ID_NS_SCx200_VIDEO 0x0504 ++#define PCI_DEVICE_ID_NS_SCx200_XBUS 0x0505 ++#define PCI_DEVICE_ID_NS_SC1100_BRIDGE 0x0510 ++#define PCI_DEVICE_ID_NS_SC1100_SMI 0x0511 ++#define PCI_DEVICE_ID_NS_SC1100_XBUS 0x0515 ++#define PCI_DEVICE_ID_NS_87410 0xd001 ++ ++#define PCI_VENDOR_ID_TSENG 0x100c ++#define PCI_DEVICE_ID_TSENG_W32P_2 0x3202 ++#define PCI_DEVICE_ID_TSENG_W32P_b 0x3205 ++#define PCI_DEVICE_ID_TSENG_W32P_c 0x3206 ++#define PCI_DEVICE_ID_TSENG_W32P_d 0x3207 ++#define PCI_DEVICE_ID_TSENG_ET6000 0x3208 ++ ++#define PCI_VENDOR_ID_WEITEK 0x100e ++#define PCI_DEVICE_ID_WEITEK_P9000 0x9001 ++#define PCI_DEVICE_ID_WEITEK_P9100 0x9100 ++ ++#define PCI_VENDOR_ID_DEC 0x1011 ++#define PCI_DEVICE_ID_DEC_BRD 0x0001 ++#define PCI_DEVICE_ID_DEC_TULIP 0x0002 ++#define PCI_DEVICE_ID_DEC_TGA 0x0004 ++#define PCI_DEVICE_ID_DEC_TULIP_FAST 0x0009 ++#define PCI_DEVICE_ID_DEC_TGA2 0x000D ++#define PCI_DEVICE_ID_DEC_FDDI 0x000F ++#define PCI_DEVICE_ID_DEC_TULIP_PLUS 0x0014 ++#define PCI_DEVICE_ID_DEC_21142 0x0019 ++#define PCI_DEVICE_ID_DEC_21052 0x0021 ++#define PCI_DEVICE_ID_DEC_21150 0x0022 ++#define PCI_DEVICE_ID_DEC_21152 0x0024 ++#define PCI_DEVICE_ID_DEC_21153 0x0025 ++#define PCI_DEVICE_ID_DEC_21154 0x0026 ++#define PCI_DEVICE_ID_DEC_21285 0x1065 ++#define PCI_DEVICE_ID_COMPAQ_42XX 0x0046 ++ ++#define PCI_VENDOR_ID_CIRRUS 0x1013 ++#define PCI_DEVICE_ID_CIRRUS_7548 0x0038 ++#define PCI_DEVICE_ID_CIRRUS_5430 0x00a0 ++#define PCI_DEVICE_ID_CIRRUS_5434_4 0x00a4 ++#define PCI_DEVICE_ID_CIRRUS_5434_8 0x00a8 ++#define PCI_DEVICE_ID_CIRRUS_5436 0x00ac ++#define PCI_DEVICE_ID_CIRRUS_5446 0x00b8 ++#define PCI_DEVICE_ID_CIRRUS_5480 0x00bc ++#define PCI_DEVICE_ID_CIRRUS_5462 0x00d0 ++#define PCI_DEVICE_ID_CIRRUS_5464 0x00d4 ++#define PCI_DEVICE_ID_CIRRUS_5465 0x00d6 ++#define PCI_DEVICE_ID_CIRRUS_6729 0x1100 ++#define PCI_DEVICE_ID_CIRRUS_6832 0x1110 ++#define PCI_DEVICE_ID_CIRRUS_7542 0x1200 ++#define PCI_DEVICE_ID_CIRRUS_7543 0x1202 ++#define PCI_DEVICE_ID_CIRRUS_7541 0x1204 ++ ++#define PCI_VENDOR_ID_IBM 0x1014 ++#define PCI_DEVICE_ID_IBM_FIRE_CORAL 0x000a ++#define PCI_DEVICE_ID_IBM_TR 0x0018 ++#define PCI_DEVICE_ID_IBM_82G2675 0x001d ++#define PCI_DEVICE_ID_IBM_MCA 0x0020 ++#define PCI_DEVICE_ID_IBM_82351 0x0022 ++#define PCI_DEVICE_ID_IBM_PYTHON 0x002d ++#define PCI_DEVICE_ID_IBM_SERVERAID 0x002e ++#define PCI_DEVICE_ID_IBM_TR_WAKE 0x003e ++#define PCI_DEVICE_ID_IBM_MPIC 0x0046 ++#define PCI_DEVICE_ID_IBM_3780IDSP 0x007d ++#define PCI_DEVICE_ID_IBM_CHUKAR 0x0096 ++#define PCI_DEVICE_ID_IBM_CPC710_PCI64 0x00fc ++#define PCI_DEVICE_ID_IBM_CPC710_PCI32 0x0105 ++#define PCI_DEVICE_ID_IBM_405GP 0x0156 ++#define PCI_DEVICE_ID_IBM_SNIPE 0x0180 ++#define PCI_DEVICE_ID_IBM_SERVERAIDI960 0x01bd ++#define PCI_DEVICE_ID_IBM_CITRINE 0x028C ++#define PCI_DEVICE_ID_IBM_GEMSTONE 0xB166 ++#define PCI_DEVICE_ID_IBM_MPIC_2 0xffff ++#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1 0x0031 ++#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2 0x0219 ++#define PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX 0x021A ++#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM 0x0251 ++#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252 ++ ++#define PCI_VENDOR_ID_COMPEX2 0x101a // pci.ids says "AT&T GIS (NCR)" ++#define PCI_DEVICE_ID_COMPEX2_100VG 0x0005 ++ ++#define PCI_VENDOR_ID_WD 0x101c ++#define PCI_DEVICE_ID_WD_7197 0x3296 ++#define PCI_DEVICE_ID_WD_90C 0xc24a ++ ++#define PCI_VENDOR_ID_AMI 0x101e ++#define PCI_DEVICE_ID_AMI_MEGARAID3 0x1960 ++#define PCI_DEVICE_ID_AMI_MEGARAID 0x9010 ++#define PCI_DEVICE_ID_AMI_MEGARAID2 0x9060 ++ ++#define PCI_VENDOR_ID_AMD 0x1022 ++#define PCI_DEVICE_ID_AMD_LANCE 0x2000 ++#define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001 ++#define PCI_DEVICE_ID_AMD_SCSI 0x2020 ++#define PCI_DEVICE_ID_AMD_SERENADE 0x36c0 ++#define PCI_DEVICE_ID_AMD_FE_GATE_7006 0x7006 ++#define PCI_DEVICE_ID_AMD_FE_GATE_7007 0x7007 ++#define PCI_DEVICE_ID_AMD_FE_GATE_700C 0x700C ++#define PCI_DEVICE_ID_AMD_FE_GATE_700D 0x700D ++#define PCI_DEVICE_ID_AMD_FE_GATE_700E 0x700E ++#define PCI_DEVICE_ID_AMD_FE_GATE_700F 0x700F ++#define PCI_DEVICE_ID_AMD_COBRA_7400 0x7400 ++#define PCI_DEVICE_ID_AMD_COBRA_7401 0x7401 ++#define PCI_DEVICE_ID_AMD_COBRA_7403 0x7403 ++#define PCI_DEVICE_ID_AMD_COBRA_7404 0x7404 ++#define PCI_DEVICE_ID_AMD_VIPER_7408 0x7408 ++#define PCI_DEVICE_ID_AMD_VIPER_7409 0x7409 ++#define PCI_DEVICE_ID_AMD_VIPER_740B 0x740B ++#define PCI_DEVICE_ID_AMD_VIPER_740C 0x740C ++#define PCI_DEVICE_ID_AMD_VIPER_7410 0x7410 ++#define PCI_DEVICE_ID_AMD_VIPER_7411 0x7411 ++#define PCI_DEVICE_ID_AMD_VIPER_7413 0x7413 ++#define PCI_DEVICE_ID_AMD_VIPER_7414 0x7414 ++#define PCI_DEVICE_ID_AMD_OPUS_7440 0x7440 ++# define PCI_DEVICE_ID_AMD_VIPER_7440 PCI_DEVICE_ID_AMD_OPUS_7440 ++#define PCI_DEVICE_ID_AMD_OPUS_7441 0x7441 ++# define PCI_DEVICE_ID_AMD_VIPER_7441 PCI_DEVICE_ID_AMD_OPUS_7441 ++#define PCI_DEVICE_ID_AMD_OPUS_7443 0x7443 ++# define PCI_DEVICE_ID_AMD_VIPER_7443 PCI_DEVICE_ID_AMD_OPUS_7443 ++#define PCI_DEVICE_ID_AMD_OPUS_7445 0x7445 ++#define PCI_DEVICE_ID_AMD_OPUS_7448 0x7448 ++# define PCI_DEVICE_ID_AMD_VIPER_7448 PCI_DEVICE_ID_AMD_OPUS_7448 ++#define PCI_DEVICE_ID_AMD_OPUS_7449 0x7449 ++# define PCI_DEVICE_ID_AMD_VIPER_7449 PCI_DEVICE_ID_AMD_OPUS_7449 ++#define PCI_DEVICE_ID_AMD_8111_LAN 0x7462 ++#define PCI_DEVICE_ID_AMD_8111_LPC 0x7468 ++#define PCI_DEVICE_ID_AMD_8111_IDE 0x7469 ++#define PCI_DEVICE_ID_AMD_8111_SMBUS2 0x746a ++#define PCI_DEVICE_ID_AMD_8111_SMBUS 0x746b ++#define PCI_DEVICE_ID_AMD_8111_AUDIO 0x746d ++#define PCI_DEVICE_ID_AMD_8151_0 0x7454 ++#define PCI_DEVICE_ID_AMD_8131_APIC 0x7450 ++ ++#define PCI_VENDOR_ID_TRIDENT 0x1023 ++#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000 ++#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX 0x2001 ++#define PCI_DEVICE_ID_TRIDENT_9320 0x9320 ++#define PCI_DEVICE_ID_TRIDENT_9388 0x9388 ++#define PCI_DEVICE_ID_TRIDENT_9397 0x9397 ++#define PCI_DEVICE_ID_TRIDENT_939A 0x939A ++#define PCI_DEVICE_ID_TRIDENT_9520 0x9520 ++#define PCI_DEVICE_ID_TRIDENT_9525 0x9525 ++#define PCI_DEVICE_ID_TRIDENT_9420 0x9420 ++#define PCI_DEVICE_ID_TRIDENT_9440 0x9440 ++#define PCI_DEVICE_ID_TRIDENT_9660 0x9660 ++#define PCI_DEVICE_ID_TRIDENT_9750 0x9750 ++#define PCI_DEVICE_ID_TRIDENT_9850 0x9850 ++#define PCI_DEVICE_ID_TRIDENT_9880 0x9880 ++#define PCI_DEVICE_ID_TRIDENT_8400 0x8400 ++#define PCI_DEVICE_ID_TRIDENT_8420 0x8420 ++#define PCI_DEVICE_ID_TRIDENT_8500 0x8500 ++ ++#define PCI_VENDOR_ID_AI 0x1025 ++#define PCI_DEVICE_ID_AI_M1435 0x1435 ++ ++#define PCI_VENDOR_ID_DELL 0x1028 ++#define PCI_DEVICE_ID_DELL_RACIII 0x0008 ++#define PCI_DEVICE_ID_DELL_RAC4 0x0012 ++ ++#define PCI_VENDOR_ID_MATROX 0x102B ++#define PCI_DEVICE_ID_MATROX_MGA_2 0x0518 ++#define PCI_DEVICE_ID_MATROX_MIL 0x0519 ++#define PCI_DEVICE_ID_MATROX_MYS 0x051A ++#define PCI_DEVICE_ID_MATROX_MIL_2 0x051b ++#define PCI_DEVICE_ID_MATROX_MIL_2_AGP 0x051f ++#define PCI_DEVICE_ID_MATROX_MGA_IMP 0x0d10 ++#define PCI_DEVICE_ID_MATROX_G100_MM 0x1000 ++#define PCI_DEVICE_ID_MATROX_G100_AGP 0x1001 ++#define PCI_DEVICE_ID_MATROX_G200_PCI 0x0520 ++#define PCI_DEVICE_ID_MATROX_G200_AGP 0x0521 ++#define PCI_DEVICE_ID_MATROX_G400 0x0525 ++#define PCI_DEVICE_ID_MATROX_G550 0x2527 ++#define PCI_DEVICE_ID_MATROX_VIA 0x4536 ++ ++#define PCI_VENDOR_ID_CT 0x102c ++#define PCI_DEVICE_ID_CT_69000 0x00c0 ++#define PCI_DEVICE_ID_CT_65545 0x00d8 ++#define PCI_DEVICE_ID_CT_65548 0x00dc ++#define PCI_DEVICE_ID_CT_65550 0x00e0 ++#define PCI_DEVICE_ID_CT_65554 0x00e4 ++#define PCI_DEVICE_ID_CT_65555 0x00e5 ++ ++#define PCI_VENDOR_ID_MIRO 0x1031 ++#define PCI_DEVICE_ID_MIRO_36050 0x5601 ++#define PCI_DEVICE_ID_MIRO_DC10PLUS 0x7efe ++#define PCI_DEVICE_ID_MIRO_DC30PLUS 0xd801 ++ ++#define PCI_VENDOR_ID_NEC 0x1033 ++#define PCI_DEVICE_ID_NEC_CBUS_1 0x0001 /* PCI-Cbus Bridge */ ++#define PCI_DEVICE_ID_NEC_LOCAL 0x0002 /* Local Bridge */ ++#define PCI_DEVICE_ID_NEC_ATM 0x0003 /* ATM LAN Controller */ ++#define PCI_DEVICE_ID_NEC_R4000 0x0004 /* R4000 Bridge */ ++#define PCI_DEVICE_ID_NEC_486 0x0005 /* 486 Like Peripheral Bus Bridge */ ++#define PCI_DEVICE_ID_NEC_ACCEL_1 0x0006 /* Graphic Accelerator */ ++#define PCI_DEVICE_ID_NEC_UXBUS 0x0007 /* UX-Bus Bridge */ ++#define PCI_DEVICE_ID_NEC_ACCEL_2 0x0008 /* Graphic Accelerator */ ++#define PCI_DEVICE_ID_NEC_GRAPH 0x0009 /* PCI-CoreGraph Bridge */ ++#define PCI_DEVICE_ID_NEC_VL 0x0016 /* PCI-VL Bridge */ ++#define PCI_DEVICE_ID_NEC_STARALPHA2 0x002c /* STAR ALPHA2 */ ++#define PCI_DEVICE_ID_NEC_CBUS_2 0x002d /* PCI-Cbus Bridge */ ++#define PCI_DEVICE_ID_NEC_USB 0x0035 /* PCI-USB Host */ ++#define PCI_DEVICE_ID_NEC_CBUS_3 0x003b ++#define PCI_DEVICE_ID_NEC_NAPCCARD 0x003e ++#define PCI_DEVICE_ID_NEC_PCX2 0x0046 /* PowerVR */ ++#define PCI_DEVICE_ID_NEC_NILE4 0x005a ++#define PCI_DEVICE_ID_NEC_VRC5476 0x009b ++#define PCI_DEVICE_ID_NEC_VRC4173 0x00a5 ++#define PCI_DEVICE_ID_NEC_VRC5477_AC97 0x00a6 ++#define PCI_DEVICE_ID_NEC_PC9821CS01 0x800c /* PC-9821-CS01 */ ++#define PCI_DEVICE_ID_NEC_PC9821NRB06 0x800d /* PC-9821NR-B06 */ ++ ++#define PCI_VENDOR_ID_FD 0x1036 ++#define PCI_DEVICE_ID_FD_36C70 0x0000 ++ ++#define PCI_VENDOR_ID_SI 0x1039 ++#define PCI_DEVICE_ID_SI_5591_AGP 0x0001 ++#define PCI_DEVICE_ID_SI_6202 0x0002 ++#define PCI_DEVICE_ID_SI_503 0x0008 ++#define PCI_DEVICE_ID_SI_ACPI 0x0009 ++#define PCI_DEVICE_ID_SI_SMBUS 0x0016 ++#define PCI_DEVICE_ID_SI_LPC 0x0018 ++#define PCI_DEVICE_ID_SI_5597_VGA 0x0200 ++#define PCI_DEVICE_ID_SI_6205 0x0205 ++#define PCI_DEVICE_ID_SI_501 0x0406 ++#define PCI_DEVICE_ID_SI_496 0x0496 ++#define PCI_DEVICE_ID_SI_300 0x0300 ++#define PCI_DEVICE_ID_SI_315H 0x0310 ++#define PCI_DEVICE_ID_SI_315 0x0315 ++#define PCI_DEVICE_ID_SI_315PRO 0x0325 ++#define PCI_DEVICE_ID_SI_530 0x0530 ++#define PCI_DEVICE_ID_SI_540 0x0540 ++#define PCI_DEVICE_ID_SI_550 0x0550 ++#define PCI_DEVICE_ID_SI_540_VGA 0x5300 ++#define PCI_DEVICE_ID_SI_550_VGA 0x5315 ++#define PCI_DEVICE_ID_SI_601 0x0601 ++#define PCI_DEVICE_ID_SI_620 0x0620 ++#define PCI_DEVICE_ID_SI_630 0x0630 ++#define PCI_DEVICE_ID_SI_633 0x0633 ++#define PCI_DEVICE_ID_SI_635 0x0635 ++#define PCI_DEVICE_ID_SI_640 0x0640 ++#define PCI_DEVICE_ID_SI_645 0x0645 ++#define PCI_DEVICE_ID_SI_646 0x0646 ++#define PCI_DEVICE_ID_SI_648 0x0648 ++#define PCI_DEVICE_ID_SI_650 0x0650 ++#define PCI_DEVICE_ID_SI_651 0x0651 ++#define PCI_DEVICE_ID_SI_652 0x0652 ++#define PCI_DEVICE_ID_SI_655 0x0655 ++#define PCI_DEVICE_ID_SI_661 0x0661 ++#define PCI_DEVICE_ID_SI_730 0x0730 ++#define PCI_DEVICE_ID_SI_733 0x0733 ++#define PCI_DEVICE_ID_SI_630_VGA 0x6300 ++#define PCI_DEVICE_ID_SI_730_VGA 0x7300 ++#define PCI_DEVICE_ID_SI_735 0x0735 ++#define PCI_DEVICE_ID_SI_740 0x0740 ++#define PCI_DEVICE_ID_SI_741 0x0741 ++#define PCI_DEVICE_ID_SI_745 0x0745 ++#define PCI_DEVICE_ID_SI_746 0x0746 ++#define PCI_DEVICE_ID_SI_748 0x0748 ++#define PCI_DEVICE_ID_SI_750 0x0750 ++#define PCI_DEVICE_ID_SI_751 0x0751 ++#define PCI_DEVICE_ID_SI_752 0x0752 ++#define PCI_DEVICE_ID_SI_755 0x0755 ++#define PCI_DEVICE_ID_SI_760 0x0760 ++#define PCI_DEVICE_ID_SI_900 0x0900 ++#define PCI_DEVICE_ID_SI_961 0x0961 ++#define PCI_DEVICE_ID_SI_962 0x0962 ++#define PCI_DEVICE_ID_SI_963 0x0963 ++#define PCI_DEVICE_ID_SI_5107 0x5107 ++#define PCI_DEVICE_ID_SI_5300 0x5300 ++#define PCI_DEVICE_ID_SI_5511 0x5511 ++#define PCI_DEVICE_ID_SI_5513 0x5513 ++#define PCI_DEVICE_ID_SI_5518 0x5518 ++#define PCI_DEVICE_ID_SI_5571 0x5571 ++#define PCI_DEVICE_ID_SI_5581 0x5581 ++#define PCI_DEVICE_ID_SI_5582 0x5582 ++#define PCI_DEVICE_ID_SI_5591 0x5591 ++#define PCI_DEVICE_ID_SI_5596 0x5596 ++#define PCI_DEVICE_ID_SI_5597 0x5597 ++#define PCI_DEVICE_ID_SI_5598 0x5598 ++#define PCI_DEVICE_ID_SI_5600 0x5600 ++#define PCI_DEVICE_ID_SI_6300 0x6300 ++#define PCI_DEVICE_ID_SI_6306 0x6306 ++#define PCI_DEVICE_ID_SI_6326 0x6326 ++#define PCI_DEVICE_ID_SI_7001 0x7001 ++#define PCI_DEVICE_ID_SI_7012 0x7012 ++#define PCI_DEVICE_ID_SI_7016 0x7016 ++ ++#define PCI_VENDOR_ID_HP 0x103c ++#define PCI_DEVICE_ID_HP_VISUALIZE_EG 0x1005 ++#define PCI_DEVICE_ID_HP_VISUALIZE_FX6 0x1006 ++#define PCI_DEVICE_ID_HP_VISUALIZE_FX4 0x1008 ++#define PCI_DEVICE_ID_HP_VISUALIZE_FX2 0x100a ++#define PCI_DEVICE_ID_HP_TACHYON 0x1028 ++#define PCI_DEVICE_ID_HP_TACHLITE 0x1029 ++#define PCI_DEVICE_ID_HP_J2585A 0x1030 ++#define PCI_DEVICE_ID_HP_J2585B 0x1031 ++#define PCI_DEVICE_ID_HP_J2973A 0x1040 ++#define PCI_DEVICE_ID_HP_J2970A 0x1042 ++#define PCI_DEVICE_ID_HP_DIVA 0x1048 ++#define PCI_DEVICE_ID_HP_DIVA_TOSCA1 0x1049 ++#define PCI_DEVICE_ID_HP_DIVA_TOSCA2 0x104A ++#define PCI_DEVICE_ID_HP_DIVA_MAESTRO 0x104B ++#define PCI_DEVICE_ID_HP_PCI_LBA 0x1054 ++#define PCI_DEVICE_ID_HP_REO_SBA 0x10f0 ++#define PCI_DEVICE_ID_HP_REO_IOC 0x10f1 ++#define PCI_DEVICE_ID_HP_VISUALIZE_FXE 0x108b ++#define PCI_DEVICE_ID_HP_DIVA_HALFDOME 0x1223 ++#define PCI_DEVICE_ID_HP_DIVA_KEYSTONE 0x1226 ++#define PCI_DEVICE_ID_HP_DIVA_POWERBAR 0x1227 ++#define PCI_DEVICE_ID_HP_ZX1_SBA 0x1229 ++#define PCI_DEVICE_ID_HP_ZX1_IOC 0x122a ++#define PCI_DEVICE_ID_HP_PCIX_LBA 0x122e ++#define PCI_DEVICE_ID_HP_SX1000_IOC 0x127c ++#define PCI_DEVICE_ID_HP_DIVA_EVEREST 0x1282 ++#define PCI_DEVICE_ID_HP_DIVA_AUX 0x1290 ++#define PCI_DEVICE_ID_HP_DIVA_RMP3 0x1301 ++#define PCI_DEVICE_ID_HP_CISSA 0x3220 ++#define PCI_DEVICE_ID_HP_CISSB 0x3230 ++#define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031 ++ ++#define PCI_VENDOR_ID_PCTECH 0x1042 ++#define PCI_DEVICE_ID_PCTECH_RZ1000 0x1000 ++#define PCI_DEVICE_ID_PCTECH_RZ1001 0x1001 ++#define PCI_DEVICE_ID_PCTECH_SAMURAI_0 0x3000 ++#define PCI_DEVICE_ID_PCTECH_SAMURAI_1 0x3010 ++#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020 ++ ++#define PCI_VENDOR_ID_ASUSTEK 0x1043 ++#define PCI_DEVICE_ID_ASUSTEK_0675 0x0675 ++ ++#define PCI_VENDOR_ID_DPT 0x1044 ++#define PCI_DEVICE_ID_DPT 0xa400 ++ ++#define PCI_VENDOR_ID_OPTI 0x1045 ++#define PCI_DEVICE_ID_OPTI_92C178 0xc178 ++#define PCI_DEVICE_ID_OPTI_82C557 0xc557 ++#define PCI_DEVICE_ID_OPTI_82C558 0xc558 ++#define PCI_DEVICE_ID_OPTI_82C621 0xc621 ++#define PCI_DEVICE_ID_OPTI_82C700 0xc700 ++#define PCI_DEVICE_ID_OPTI_82C701 0xc701 ++#define PCI_DEVICE_ID_OPTI_82C814 0xc814 ++#define PCI_DEVICE_ID_OPTI_82C822 0xc822 ++#define PCI_DEVICE_ID_OPTI_82C861 0xc861 ++#define PCI_DEVICE_ID_OPTI_82C825 0xd568 ++ ++#define PCI_VENDOR_ID_ELSA 0x1048 ++#define PCI_DEVICE_ID_ELSA_MICROLINK 0x1000 ++#define PCI_DEVICE_ID_ELSA_QS3000 0x3000 ++ ++#define PCI_VENDOR_ID_SGS 0x104a ++#define PCI_DEVICE_ID_SGS_2000 0x0008 ++#define PCI_DEVICE_ID_SGS_1764 0x0009 ++ ++#define PCI_VENDOR_ID_BUSLOGIC 0x104B ++#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140 ++#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER 0x1040 ++#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT 0x8130 ++ ++#define PCI_VENDOR_ID_TI 0x104c ++#define PCI_DEVICE_ID_TI_TVP4010 0x3d04 ++#define PCI_DEVICE_ID_TI_TVP4020 0x3d07 ++#define PCI_DEVICE_ID_TI_4450 0x8011 ++#define PCI_DEVICE_ID_TI_1130 0xac12 ++#define PCI_DEVICE_ID_TI_1031 0xac13 ++#define PCI_DEVICE_ID_TI_1131 0xac15 ++#define PCI_DEVICE_ID_TI_1250 0xac16 ++#define PCI_DEVICE_ID_TI_1220 0xac17 ++#define PCI_DEVICE_ID_TI_1221 0xac19 ++#define PCI_DEVICE_ID_TI_1210 0xac1a ++#define PCI_DEVICE_ID_TI_1450 0xac1b ++#define PCI_DEVICE_ID_TI_1225 0xac1c ++#define PCI_DEVICE_ID_TI_1251A 0xac1d ++#define PCI_DEVICE_ID_TI_1211 0xac1e ++#define PCI_DEVICE_ID_TI_1251B 0xac1f ++#define PCI_DEVICE_ID_TI_4410 0xac41 ++#define PCI_DEVICE_ID_TI_4451 0xac42 ++#define PCI_DEVICE_ID_TI_4510 0xac44 ++#define PCI_DEVICE_ID_TI_4520 0xac46 ++#define PCI_DEVICE_ID_TI_1410 0xac50 ++#define PCI_DEVICE_ID_TI_1420 0xac51 ++#define PCI_DEVICE_ID_TI_1451A 0xac52 ++#define PCI_DEVICE_ID_TI_1620 0xac54 ++#define PCI_DEVICE_ID_TI_1520 0xac55 ++#define PCI_DEVICE_ID_TI_1510 0xac56 ++ ++#define PCI_VENDOR_ID_SONY 0x104d ++#define PCI_DEVICE_ID_SONY_CXD3222 0x8039 ++ ++#define PCI_VENDOR_ID_OAK 0x104e ++#define PCI_DEVICE_ID_OAK_OTI107 0x0107 ++ ++/* Winbond have two vendor IDs! See 0x10ad as well */ ++#define PCI_VENDOR_ID_WINBOND2 0x1050 ++#define PCI_DEVICE_ID_WINBOND2_89C940 0x0940 ++#define PCI_DEVICE_ID_WINBOND2_89C940F 0x5a5a ++#define PCI_DEVICE_ID_WINBOND2_6692 0x6692 ++ ++#define PCI_VENDOR_ID_ANIGMA 0x1051 ++#define PCI_DEVICE_ID_ANIGMA_MC145575 0x0100 ++ ++#define PCI_VENDOR_ID_EFAR 0x1055 ++#define PCI_DEVICE_ID_EFAR_SLC90E66_1 0x9130 ++#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460 ++#define PCI_DEVICE_ID_EFAR_SLC90E66_2 0x9462 ++#define PCI_DEVICE_ID_EFAR_SLC90E66_3 0x9463 ++ ++#define PCI_VENDOR_ID_MOTOROLA 0x1057 ++#define PCI_VENDOR_ID_MOTOROLA_OOPS 0x1507 ++#define PCI_DEVICE_ID_MOTOROLA_MPC105 0x0001 ++#define PCI_DEVICE_ID_MOTOROLA_MPC106 0x0002 ++#define PCI_DEVICE_ID_MOTOROLA_MPC107 0x0004 ++#define PCI_DEVICE_ID_MOTOROLA_RAVEN 0x4801 ++#define PCI_DEVICE_ID_MOTOROLA_FALCON 0x4802 ++#define PCI_DEVICE_ID_MOTOROLA_HAWK 0x4803 ++#define PCI_DEVICE_ID_MOTOROLA_CPX8216 0x4806 ++#define PCI_DEVICE_ID_MOTOROLA_HARRIER 0x480b ++#define PCI_DEVICE_ID_MOTOROLA_MPC5200 0x5803 ++ ++#define PCI_VENDOR_ID_PROMISE 0x105a ++#define PCI_DEVICE_ID_PROMISE_20265 0x0d30 ++#define PCI_DEVICE_ID_PROMISE_20267 0x4d30 ++#define PCI_DEVICE_ID_PROMISE_20246 0x4d33 ++#define PCI_DEVICE_ID_PROMISE_20262 0x4d38 ++#define PCI_DEVICE_ID_PROMISE_20263 0x0D38 ++#define PCI_DEVICE_ID_PROMISE_20268 0x4d68 ++#define PCI_DEVICE_ID_PROMISE_20268R 0x6268 ++#define PCI_DEVICE_ID_PROMISE_20269 0x4d69 ++#define PCI_DEVICE_ID_PROMISE_20270 0x6268 ++#define PCI_DEVICE_ID_PROMISE_20271 0x6269 ++#define PCI_DEVICE_ID_PROMISE_20275 0x1275 ++#define PCI_DEVICE_ID_PROMISE_20276 0x5275 ++#define PCI_DEVICE_ID_PROMISE_20277 0x7275 ++#define PCI_DEVICE_ID_PROMISE_5300 0x5300 ++ ++#define PCI_VENDOR_ID_N9 0x105d ++#define PCI_DEVICE_ID_N9_I128 0x2309 ++#define PCI_DEVICE_ID_N9_I128_2 0x2339 ++#define PCI_DEVICE_ID_N9_I128_T2R 0x493d ++ ++#define PCI_VENDOR_ID_UMC 0x1060 ++#define PCI_DEVICE_ID_UMC_UM8673F 0x0101 ++#define PCI_DEVICE_ID_UMC_UM8891A 0x0891 ++#define PCI_DEVICE_ID_UMC_UM8886BF 0x673a ++#define PCI_DEVICE_ID_UMC_UM8886A 0x886a ++#define PCI_DEVICE_ID_UMC_UM8881F 0x8881 ++#define PCI_DEVICE_ID_UMC_UM8886F 0x8886 ++#define PCI_DEVICE_ID_UMC_UM9017F 0x9017 ++#define PCI_DEVICE_ID_UMC_UM8886N 0xe886 ++#define PCI_DEVICE_ID_UMC_UM8891N 0xe891 ++ ++#define PCI_VENDOR_ID_X 0x1061 ++#define PCI_DEVICE_ID_X_AGX016 0x0001 ++ ++#define PCI_VENDOR_ID_MYLEX 0x1069 ++#define PCI_DEVICE_ID_MYLEX_DAC960_P 0x0001 ++#define PCI_DEVICE_ID_MYLEX_DAC960_PD 0x0002 ++#define PCI_DEVICE_ID_MYLEX_DAC960_PG 0x0010 ++#define PCI_DEVICE_ID_MYLEX_DAC960_LA 0x0020 ++#define PCI_DEVICE_ID_MYLEX_DAC960_LP 0x0050 ++#define PCI_DEVICE_ID_MYLEX_DAC960_BA 0xBA56 ++#define PCI_DEVICE_ID_MYLEX_DAC960_GEM 0xB166 ++ ++#define PCI_VENDOR_ID_PICOP 0x1066 ++#define PCI_DEVICE_ID_PICOP_PT86C52X 0x0001 ++#define PCI_DEVICE_ID_PICOP_PT80C524 0x8002 ++ ++#define PCI_VENDOR_ID_APPLE 0x106b ++#define PCI_DEVICE_ID_APPLE_BANDIT 0x0001 ++#define PCI_DEVICE_ID_APPLE_GC 0x0002 ++#define PCI_DEVICE_ID_APPLE_HYDRA 0x000e ++#define PCI_DEVICE_ID_APPLE_UNI_N_FW 0x0018 ++#define PCI_DEVICE_ID_APPLE_KL_USB 0x0019 ++#define PCI_DEVICE_ID_APPLE_UNI_N_AGP 0x0020 ++#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC 0x0021 ++#define PCI_DEVICE_ID_APPLE_KEYLARGO 0x0022 ++#define PCI_DEVICE_ID_APPLE_UNI_N_GMACP 0x0024 ++#define PCI_DEVICE_ID_APPLE_KEYLARGO_P 0x0025 ++#define PCI_DEVICE_ID_APPLE_KL_USB_P 0x0026 ++#define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P 0x0027 ++#define PCI_DEVICE_ID_APPLE_UNI_N_AGP15 0x002d ++#define PCI_DEVICE_ID_APPLE_UNI_N_PCI15 0x002e ++#define PCI_DEVICE_ID_APPLE_UNI_N_FW2 0x0030 ++#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2 0x0032 ++#define PCI_DEVIEC_ID_APPLE_UNI_N_ATA 0x0033 ++#define PCI_DEVICE_ID_APPLE_UNI_N_AGP2 0x0034 ++#define PCI_DEVICE_ID_APPLE_IPID_ATA100 0x003b ++#define PCI_DEVICE_ID_APPLE_KEYLARGO_I 0x003e ++#define PCI_DEVICE_ID_APPLE_K2_ATA100 0x0043 ++#define PCI_DEVICE_ID_APPLE_U3_AGP 0x004b ++#define PCI_DEVICE_ID_APPLE_K2_GMAC 0x004c ++#define PCI_DEVICE_ID_APPLE_SH_ATA 0x0050 ++#define PCI_DEVICE_ID_APPLE_SH_SUNGEM 0x0051 ++#define PCI_DEVICE_ID_APPLE_SH_FW 0x0052 ++#define PCI_DEVICE_ID_APPLE_U3L_AGP 0x0058 ++#define PCI_DEVICE_ID_APPLE_U3H_AGP 0x0059 ++#define PCI_DEVICE_ID_APPLE_TIGON3 0x1645 ++ ++#define PCI_VENDOR_ID_YAMAHA 0x1073 ++#define PCI_DEVICE_ID_YAMAHA_724 0x0004 ++#define PCI_DEVICE_ID_YAMAHA_724F 0x000d ++#define PCI_DEVICE_ID_YAMAHA_740 0x000a ++#define PCI_DEVICE_ID_YAMAHA_740C 0x000c ++#define PCI_DEVICE_ID_YAMAHA_744 0x0010 ++#define PCI_DEVICE_ID_YAMAHA_754 0x0012 ++ ++#define PCI_VENDOR_ID_NEXGEN 0x1074 ++#define PCI_DEVICE_ID_NEXGEN_82C501 0x4e78 ++ ++#define PCI_VENDOR_ID_QLOGIC 0x1077 ++#define PCI_DEVICE_ID_QLOGIC_ISP1020 0x1020 ++#define PCI_DEVICE_ID_QLOGIC_ISP1022 0x1022 ++#define PCI_DEVICE_ID_QLOGIC_ISP2100 0x2100 ++#define PCI_DEVICE_ID_QLOGIC_ISP2200 0x2200 ++ ++#define PCI_VENDOR_ID_CYRIX 0x1078 ++#define PCI_DEVICE_ID_CYRIX_5510 0x0000 ++#define PCI_DEVICE_ID_CYRIX_PCI_MASTER 0x0001 ++#define PCI_DEVICE_ID_CYRIX_5520 0x0002 ++#define PCI_DEVICE_ID_CYRIX_5530_LEGACY 0x0100 ++#define PCI_DEVICE_ID_CYRIX_5530_SMI 0x0101 ++#define PCI_DEVICE_ID_CYRIX_5530_IDE 0x0102 ++#define PCI_DEVICE_ID_CYRIX_5530_AUDIO 0x0103 ++#define PCI_DEVICE_ID_CYRIX_5530_VIDEO 0x0104 ++ ++#define PCI_VENDOR_ID_LEADTEK 0x107d ++#define PCI_DEVICE_ID_LEADTEK_805 0x0000 ++ ++#define PCI_VENDOR_ID_INTERPHASE 0x107e ++#define PCI_DEVICE_ID_INTERPHASE_5526 0x0004 ++#define PCI_DEVICE_ID_INTERPHASE_55x6 0x0005 ++#define PCI_DEVICE_ID_INTERPHASE_5575 0x0008 ++ ++#define PCI_VENDOR_ID_CONTAQ 0x1080 ++#define PCI_DEVICE_ID_CONTAQ_82C599 0x0600 ++#define PCI_DEVICE_ID_CONTAQ_82C693 0xc693 ++ ++#define PCI_VENDOR_ID_FOREX 0x1083 ++ ++#define PCI_VENDOR_ID_OLICOM 0x108d ++#define PCI_DEVICE_ID_OLICOM_OC3136 0x0001 ++#define PCI_DEVICE_ID_OLICOM_OC2315 0x0011 ++#define PCI_DEVICE_ID_OLICOM_OC2325 0x0012 ++#define PCI_DEVICE_ID_OLICOM_OC2183 0x0013 ++#define PCI_DEVICE_ID_OLICOM_OC2326 0x0014 ++#define PCI_DEVICE_ID_OLICOM_OC6151 0x0021 ++ ++#define PCI_VENDOR_ID_SUN 0x108e ++#define PCI_DEVICE_ID_SUN_EBUS 0x1000 ++#define PCI_DEVICE_ID_SUN_HAPPYMEAL 0x1001 ++#define PCI_DEVICE_ID_SUN_RIO_EBUS 0x1100 ++#define PCI_DEVICE_ID_SUN_RIO_GEM 0x1101 ++#define PCI_DEVICE_ID_SUN_RIO_1394 0x1102 ++#define PCI_DEVICE_ID_SUN_RIO_USB 0x1103 ++#define PCI_DEVICE_ID_SUN_GEM 0x2bad ++#define PCI_DEVICE_ID_SUN_SIMBA 0x5000 ++#define PCI_DEVICE_ID_SUN_PBM 0x8000 ++#define PCI_DEVICE_ID_SUN_SCHIZO 0x8001 ++#define PCI_DEVICE_ID_SUN_SABRE 0xa000 ++#define PCI_DEVICE_ID_SUN_HUMMINGBIRD 0xa001 ++#define PCI_DEVICE_ID_SUN_TOMATILLO 0xa801 ++ ++#define PCI_VENDOR_ID_CMD 0x1095 ++#define PCI_DEVICE_ID_CMD_640 0x0640 ++#define PCI_DEVICE_ID_CMD_643 0x0643 ++#define PCI_DEVICE_ID_CMD_646 0x0646 ++#define PCI_DEVICE_ID_CMD_647 0x0647 ++#define PCI_DEVICE_ID_CMD_648 0x0648 ++#define PCI_DEVICE_ID_CMD_649 0x0649 ++#define PCI_DEVICE_ID_CMD_670 0x0670 ++#define PCI_DEVICE_ID_CMD_680 0x0680 ++ ++#define PCI_DEVICE_ID_SII_680 0x0680 ++#define PCI_DEVICE_ID_SII_3112 0x3112 ++#define PCI_DEVICE_ID_SII_1210SA 0x0240 ++ ++#define PCI_VENDOR_ID_VISION 0x1098 ++#define PCI_DEVICE_ID_VISION_QD8500 0x0001 ++#define PCI_DEVICE_ID_VISION_QD8580 0x0002 ++ ++#define PCI_VENDOR_ID_BROOKTREE 0x109e ++#define PCI_DEVICE_ID_BROOKTREE_848 0x0350 ++#define PCI_DEVICE_ID_BROOKTREE_849A 0x0351 ++#define PCI_DEVICE_ID_BROOKTREE_878_1 0x036e ++#define PCI_DEVICE_ID_BROOKTREE_878 0x0878 ++#define PCI_DEVICE_ID_BROOKTREE_8474 0x8474 ++ ++#define PCI_VENDOR_ID_SIERRA 0x10a8 ++#define PCI_DEVICE_ID_SIERRA_STB 0x0000 ++ ++#define PCI_VENDOR_ID_SGI 0x10a9 ++#define PCI_DEVICE_ID_SGI_IOC3 0x0003 ++#define PCI_DEVICE_ID_SGI_IOC4 0x100a ++#define PCI_VENDOR_ID_SGI_LITHIUM 0x1002 ++ ++#define PCI_VENDOR_ID_ACC 0x10aa ++#define PCI_DEVICE_ID_ACC_2056 0x0000 ++ ++#define PCI_VENDOR_ID_WINBOND 0x10ad ++#define PCI_DEVICE_ID_WINBOND_83769 0x0001 ++#define PCI_DEVICE_ID_WINBOND_82C105 0x0105 ++#define PCI_DEVICE_ID_WINBOND_83C553 0x0565 ++ ++#define PCI_VENDOR_ID_DATABOOK 0x10b3 ++#define PCI_DEVICE_ID_DATABOOK_87144 0xb106 ++ ++#define PCI_VENDOR_ID_PLX 0x10b5 ++#define PCI_DEVICE_ID_PLX_R685 0x1030 ++#define PCI_DEVICE_ID_PLX_ROMULUS 0x106a ++#define PCI_DEVICE_ID_PLX_SPCOM800 0x1076 ++#define PCI_DEVICE_ID_PLX_1077 0x1077 ++#define PCI_DEVICE_ID_PLX_SPCOM200 0x1103 ++#define PCI_DEVICE_ID_PLX_DJINN_ITOO 0x1151 ++#define PCI_DEVICE_ID_PLX_R753 0x1152 ++#define PCI_DEVICE_ID_PLX_9030 0x9030 ++#define PCI_DEVICE_ID_PLX_9050 0x9050 ++#define PCI_DEVICE_ID_PLX_9060 0x9060 ++#define PCI_DEVICE_ID_PLX_9060ES 0x906E ++#define PCI_DEVICE_ID_PLX_9060SD 0x906D ++#define PCI_DEVICE_ID_PLX_9080 0x9080 ++#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2 0xa001 ++ ++#define PCI_VENDOR_ID_MADGE 0x10b6 ++#define PCI_DEVICE_ID_MADGE_MK2 0x0002 ++#define PCI_DEVICE_ID_MADGE_C155S 0x1001 ++ ++#define PCI_VENDOR_ID_3COM 0x10b7 ++#define PCI_DEVICE_ID_3COM_3C985 0x0001 ++#define PCI_DEVICE_ID_3COM_3C940 0x1700 ++#define PCI_DEVICE_ID_3COM_3C339 0x3390 ++#define PCI_DEVICE_ID_3COM_3C359 0x3590 ++#define PCI_DEVICE_ID_3COM_3C590 0x5900 ++#define PCI_DEVICE_ID_3COM_3C595TX 0x5950 ++#define PCI_DEVICE_ID_3COM_3C595T4 0x5951 ++#define PCI_DEVICE_ID_3COM_3C595MII 0x5952 ++#define PCI_DEVICE_ID_3COM_3C940B 0x80eb ++#define PCI_DEVICE_ID_3COM_3C900TPO 0x9000 ++#define PCI_DEVICE_ID_3COM_3C900COMBO 0x9001 ++#define PCI_DEVICE_ID_3COM_3C905TX 0x9050 ++#define PCI_DEVICE_ID_3COM_3C905T4 0x9051 ++#define PCI_DEVICE_ID_3COM_3C905B_TX 0x9055 ++#define PCI_DEVICE_ID_3COM_3CR990 0x9900 ++#define PCI_DEVICE_ID_3COM_3CR990_TX_95 0x9902 ++#define PCI_DEVICE_ID_3COM_3CR990_TX_97 0x9903 ++#define PCI_DEVICE_ID_3COM_3CR990B 0x9904 ++#define PCI_DEVICE_ID_3COM_3CR990_FX 0x9905 ++#define PCI_DEVICE_ID_3COM_3CR990SVR95 0x9908 ++#define PCI_DEVICE_ID_3COM_3CR990SVR97 0x9909 ++#define PCI_DEVICE_ID_3COM_3CR990SVR 0x990a ++ ++#define PCI_VENDOR_ID_SMC 0x10b8 ++#define PCI_DEVICE_ID_SMC_EPIC100 0x0005 ++ ++#define PCI_VENDOR_ID_AL 0x10b9 ++#define PCI_DEVICE_ID_AL_M1445 0x1445 ++#define PCI_DEVICE_ID_AL_M1449 0x1449 ++#define PCI_DEVICE_ID_AL_M1451 0x1451 ++#define PCI_DEVICE_ID_AL_M1461 0x1461 ++#define PCI_DEVICE_ID_AL_M1489 0x1489 ++#define PCI_DEVICE_ID_AL_M1511 0x1511 ++#define PCI_DEVICE_ID_AL_M1513 0x1513 ++#define PCI_DEVICE_ID_AL_M1521 0x1521 ++#define PCI_DEVICE_ID_AL_M1523 0x1523 ++#define PCI_DEVICE_ID_AL_M1531 0x1531 ++#define PCI_DEVICE_ID_AL_M1533 0x1533 ++#define PCI_DEVICE_ID_AL_M1535 0x1535 ++#define PCI_DEVICE_ID_AL_M1541 0x1541 ++#define PCI_DEVICE_ID_AL_M1543 0x1543 ++#define PCI_DEVICE_ID_AL_M1563 0x1563 ++#define PCI_DEVICE_ID_AL_M1621 0x1621 ++#define PCI_DEVICE_ID_AL_M1631 0x1631 ++#define PCI_DEVICE_ID_AL_M1632 0x1632 ++#define PCI_DEVICE_ID_AL_M1641 0x1641 ++#define PCI_DEVICE_ID_AL_M1644 0x1644 ++#define PCI_DEVICE_ID_AL_M1647 0x1647 ++#define PCI_DEVICE_ID_AL_M1651 0x1651 ++#define PCI_DEVICE_ID_AL_M1671 0x1671 ++#define PCI_DEVICE_ID_AL_M1681 0x1681 ++#define PCI_DEVICE_ID_AL_M1683 0x1683 ++#define PCI_DEVICE_ID_AL_M1689 0x1689 ++#define PCI_DEVICE_ID_AL_M3307 0x3307 ++#define PCI_DEVICE_ID_AL_M4803 0x5215 ++#define PCI_DEVICE_ID_AL_M5219 0x5219 ++#define PCI_DEVICE_ID_AL_M5228 0x5228 ++#define PCI_DEVICE_ID_AL_M5229 0x5229 ++#define PCI_DEVICE_ID_AL_M5237 0x5237 ++#define PCI_DEVICE_ID_AL_M5243 0x5243 ++#define PCI_DEVICE_ID_AL_M5451 0x5451 ++#define PCI_DEVICE_ID_AL_M7101 0x7101 ++ ++#define PCI_VENDOR_ID_MITSUBISHI 0x10ba ++ ++#define PCI_VENDOR_ID_SURECOM 0x10bd ++#define PCI_DEVICE_ID_SURECOM_NE34 0x0e34 ++ ++#define PCI_VENDOR_ID_NEOMAGIC 0x10c8 ++#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2070 0x0001 ++#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128V 0x0002 ++#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZV 0x0003 ++#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2160 0x0004 ++#define PCI_DEVICE_ID_NEOMAGIC_MAGICMEDIA_256AV 0x0005 ++#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZVPLUS 0x0083 ++ ++#define PCI_VENDOR_ID_ASP 0x10cd ++#define PCI_DEVICE_ID_ASP_ABP940 0x1200 ++#define PCI_DEVICE_ID_ASP_ABP940U 0x1300 ++#define PCI_DEVICE_ID_ASP_ABP940UW 0x2300 ++ ++#define PCI_VENDOR_ID_MACRONIX 0x10d9 ++#define PCI_DEVICE_ID_MACRONIX_MX98713 0x0512 ++#define PCI_DEVICE_ID_MACRONIX_MX987x5 0x0531 ++ ++#define PCI_VENDOR_ID_TCONRAD 0x10da ++#define PCI_DEVICE_ID_TCONRAD_TOKENRING 0x0508 ++ ++#define PCI_VENDOR_ID_CERN 0x10dc ++#define PCI_DEVICE_ID_CERN_SPSB_PMC 0x0001 ++#define PCI_DEVICE_ID_CERN_SPSB_PCI 0x0002 ++#define PCI_DEVICE_ID_CERN_HIPPI_DST 0x0021 ++#define PCI_DEVICE_ID_CERN_HIPPI_SRC 0x0022 ++ ++#define PCI_VENDOR_ID_NVIDIA 0x10de ++#define PCI_DEVICE_ID_NVIDIA_TNT 0x0020 ++#define PCI_DEVICE_ID_NVIDIA_TNT2 0x0028 ++#define PCI_DEVICE_ID_NVIDIA_UTNT2 0x0029 ++#define PCI_DEVICE_ID_NVIDIA_TNT_UNKNOWN 0x002a ++#define PCI_DEVICE_ID_NVIDIA_VTNT2 0x002C ++#define PCI_DEVICE_ID_NVIDIA_UVTNT2 0x002D ++#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE 0x0035 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA 0x0036 ++#define PCI_DEVICE_ID_NVIDIA_NVENET_10 0x0037 ++#define PCI_DEVICE_ID_NVIDIA_NVENET_11 0x0038 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2 0x003e ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800 0x0041 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_LE 0x0042 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_GT 0x0045 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_4000 0x004E ++#define PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS 0x0052 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE 0x0053 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA 0x0054 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2 0x0055 ++#define PCI_DEVICE_ID_NVIDIA_NVENET_8 0x0056 ++#define PCI_DEVICE_ID_NVIDIA_NVENET_9 0x0057 ++#define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO 0x0059 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS 0x0064 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE 0x0065 ++#define PCI_DEVICE_ID_NVIDIA_NVENET_2 0x0066 ++#define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO 0x006a ++#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS 0x0084 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE 0x0085 ++#define PCI_DEVICE_ID_NVIDIA_NVENET_4 0x0086 ++#define PCI_DEVICE_ID_NVIDIA_NVENET_5 0x008c ++#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA 0x008e ++#define PCI_DEVICE_ID_NVIDIA_ITNT2 0x00A0 ++#define PCI_DEVICE_ID_GEFORCE_6800A 0x00c1 ++#define PCI_DEVICE_ID_GEFORCE_6800A_LE 0x00c2 ++#define PCI_DEVICE_ID_GEFORCE_GO_6800 0x00c8 ++#define PCI_DEVICE_ID_GEFORCE_GO_6800_ULTRA 0x00c9 ++#define PCI_DEVICE_ID_QUADRO_FX_GO1400 0x00cc ++#define PCI_DEVICE_ID_QUADRO_FX_1400 0x00ce ++#define PCI_DEVICE_ID_NVIDIA_NFORCE3 0x00d1 ++#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da ++#define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS 0x00d4 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE 0x00d5 ++#define PCI_DEVICE_ID_NVIDIA_NVENET_3 0x00d6 ++#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da ++#define PCI_DEVICE_ID_NVIDIA_NVENET_7 0x00df ++#define PCI_DEVICE_ID_NVIDIA_NFORCE3S 0x00e1 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA 0x00e3 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS 0x00e4 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE 0x00e5 ++#define PCI_DEVICE_ID_NVIDIA_NVENET_6 0x00e6 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2 0x00ee ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_SDR 0x0100 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_DDR 0x0101 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO 0x0103 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX 0x0110 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX2 0x0111 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GO 0x0112 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO2_MXR 0x0113 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600_GT 0x0140 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600 0x0141 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6610_XL 0x0145 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_540 0x014E ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200 0x014F ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS 0x0150 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2 0x0151 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA 0x0152 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO 0x0153 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200_TURBOCACHE 0x0161 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200 0x0164 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250 0x0166 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200_1 0x0167 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250_1 0x0168 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_460 0x0170 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440 0x0171 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420 0x0172 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_SE 0x0173 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO 0x0174 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO 0x0175 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO_M32 0x0176 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_460_GO 0x0177 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500XGL 0x0178 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO_M64 0x0179 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO4_200 0x017A ++#define PCI_DEVICE_ID_NVIDIA_QUADRO4_550XGL 0x017B ++#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500_GOGL 0x017C ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_410_GO_M16 0x017D ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_8X 0x0181 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440SE_8X 0x0182 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X 0x0183 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO 0x0186 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO 0x0187 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO4_580_XGL 0x0188 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_MAC 0x0189 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO4_280_NVS 0x018A ++#define PCI_DEVICE_ID_NVIDIA_QUADRO4_380_XGL 0x018B ++#define PCI_DEVICE_ID_NVIDIA_IGEFORCE2 0x01a0 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE 0x01a4 ++#define PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO 0x01b1 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS 0x01b4 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE 0x01bc ++#define PCI_DEVICE_ID_NVIDIA_NVENET_1 0x01c3 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE2 0x01e0 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE3 0x0200 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1 0x0201 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_2 0x0202 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO_DDC 0x0203 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B 0x0211 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_LE 0x0212 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_GT 0x0215 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4600 0x0250 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4400 0x0251 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4200 0x0253 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL 0x0258 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL 0x0259 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL 0x025B ++#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE 0x0265 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA 0x0266 ++#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2 0x0267 ++#define PCI_DEVICE_ID_NVIDIA_NVENET_12 0x0268 ++#define PCI_DEVICE_ID_NVIDIA_NVENET_13 0x0269 ++#define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO 0x026B ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800 0x0280 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X 0x0281 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE 0x0282 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_4200_GO 0x0286 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO4_980_XGL 0x0288 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO4_780_XGL 0x0289 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700_GOGL 0x028C ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800_ULTRA 0x0301 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800 0x0302 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_2000 0x0308 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1000 0x0309 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600_ULTRA 0x0311 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600 0x0312 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600SE 0x0314 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5600 0x031A ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5650 0x031B ++#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO700 0x031C ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200 0x0320 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_ULTRA 0x0321 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_1 0x0322 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200SE 0x0323 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5200 0x0324 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250 0x0325 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5500 0x0326 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5100 0x0327 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250_32 0x0328 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO_5200 0x0329 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO_NVS_280_PCI 0x032A ++#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_500 0x032B ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5300 0x032C ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5100 0x032D ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900_ULTRA 0x0330 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900 0x0331 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900XT 0x0332 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5950_ULTRA 0x0333 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900ZT 0x0334 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_3000 0x0338 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_700 0x033F ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700_ULTRA 0x0341 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700 0x0342 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700LE 0x0343 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700VE 0x0344 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_1 0x0347 ++#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2 0x0348 ++#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000 0x034C ++#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100 0x034E ++ ++#define PCI_VENDOR_ID_IMS 0x10e0 ++#define PCI_DEVICE_ID_IMS_8849 0x8849 ++#define PCI_DEVICE_ID_IMS_TT128 0x9128 ++#define PCI_DEVICE_ID_IMS_TT3D 0x9135 ++ ++#define PCI_VENDOR_ID_TEKRAM2 0x10e1 ++#define PCI_DEVICE_ID_TEKRAM2_690c 0x690c ++ ++#define PCI_VENDOR_ID_TUNDRA 0x10e3 ++#define PCI_DEVICE_ID_TUNDRA_CA91C042 0x0000 ++ ++#define PCI_VENDOR_ID_AMCC 0x10e8 ++#define PCI_DEVICE_ID_AMCC_MYRINET 0x8043 ++#define PCI_DEVICE_ID_AMCC_PARASTATION 0x8062 ++#define PCI_DEVICE_ID_AMCC_S5933 0x807d ++#define PCI_DEVICE_ID_AMCC_S5933_HEPC3 0x809c ++ ++#define PCI_VENDOR_ID_INTERG 0x10ea ++#define PCI_DEVICE_ID_INTERG_1680 0x1680 ++#define PCI_DEVICE_ID_INTERG_1682 0x1682 ++#define PCI_DEVICE_ID_INTERG_2000 0x2000 ++#define PCI_DEVICE_ID_INTERG_2010 0x2010 ++#define PCI_DEVICE_ID_INTERG_5000 0x5000 ++#define PCI_DEVICE_ID_INTERG_5050 0x5050 ++ ++#define PCI_VENDOR_ID_REALTEK 0x10ec ++#define PCI_DEVICE_ID_REALTEK_8029 0x8029 ++#define PCI_DEVICE_ID_REALTEK_8129 0x8129 ++#define PCI_DEVICE_ID_REALTEK_8139 0x8139 ++#define PCI_DEVICE_ID_REALTEK_8169 0x8169 ++ ++#define PCI_VENDOR_ID_XILINX 0x10ee ++#define PCI_DEVICE_ID_TURBOPAM 0x4020 ++ ++#define PCI_VENDOR_ID_TRUEVISION 0x10fa ++#define PCI_DEVICE_ID_TRUEVISION_T1000 0x000c ++ ++#define PCI_VENDOR_ID_INIT 0x1101 ++#define PCI_DEVICE_ID_INIT_320P 0x9100 ++#define PCI_DEVICE_ID_INIT_360P 0x9500 ++ ++#define PCI_VENDOR_ID_CREATIVE 0x1102 // duplicate: ECTIVA ++#define PCI_DEVICE_ID_CREATIVE_EMU10K1 0x0002 ++ ++#define PCI_VENDOR_ID_ECTIVA 0x1102 // duplicate: CREATIVE ++#define PCI_DEVICE_ID_ECTIVA_EV1938 0x8938 ++ ++#define PCI_VENDOR_ID_TTI 0x1103 ++#define PCI_DEVICE_ID_TTI_HPT343 0x0003 ++#define PCI_DEVICE_ID_TTI_HPT366 0x0004 ++#define PCI_DEVICE_ID_TTI_HPT372 0x0005 ++#define PCI_DEVICE_ID_TTI_HPT302 0x0006 ++#define PCI_DEVICE_ID_TTI_HPT371 0x0007 ++#define PCI_DEVICE_ID_TTI_HPT374 0x0008 ++#define PCI_DEVICE_ID_TTI_HPT372N 0x0009 // apparently a 372N variant? ++ ++#define PCI_VENDOR_ID_VIA 0x1106 ++#define PCI_DEVICE_ID_VIA_8763_0 0x0198 ++#define PCI_DEVICE_ID_VIA_8380_0 0x0204 ++#define PCI_DEVICE_ID_VIA_3238_0 0x0238 ++#define PCI_DEVICE_ID_VIA_PT880 0x0258 ++#define PCI_DEVICE_ID_VIA_PX8X0_0 0x0259 ++#define PCI_DEVICE_ID_VIA_3269_0 0x0269 ++#define PCI_DEVICE_ID_VIA_K8T800PRO_0 0x0282 ++#define PCI_DEVICE_ID_VIA_8363_0 0x0305 ++#define PCI_DEVICE_ID_VIA_8371_0 0x0391 ++#define PCI_DEVICE_ID_VIA_8501_0 0x0501 ++#define PCI_DEVICE_ID_VIA_82C505 0x0505 ++#define PCI_DEVICE_ID_VIA_82C561 0x0561 ++#define PCI_DEVICE_ID_VIA_82C586_1 0x0571 ++#define PCI_DEVICE_ID_VIA_82C576 0x0576 ++#define PCI_DEVICE_ID_VIA_82C585 0x0585 ++#define PCI_DEVICE_ID_VIA_82C586_0 0x0586 ++#define PCI_DEVICE_ID_VIA_82C595 0x0595 ++#define PCI_DEVICE_ID_VIA_82C596 0x0596 ++#define PCI_DEVICE_ID_VIA_82C597_0 0x0597 ++#define PCI_DEVICE_ID_VIA_82C598_0 0x0598 ++#define PCI_DEVICE_ID_VIA_8601_0 0x0601 ++#define PCI_DEVICE_ID_VIA_8605_0 0x0605 ++#define PCI_DEVICE_ID_VIA_82C680 0x0680 ++#define PCI_DEVICE_ID_VIA_82C686 0x0686 ++#define PCI_DEVICE_ID_VIA_82C691_0 0x0691 ++#define PCI_DEVICE_ID_VIA_82C693 0x0693 ++#define PCI_DEVICE_ID_VIA_82C693_1 0x0698 ++#define PCI_DEVICE_ID_VIA_82C926 0x0926 ++#define PCI_DEVICE_ID_VIA_82C576_1 0x1571 ++#define PCI_DEVICE_ID_VIA_82C595_97 0x1595 ++#define PCI_DEVICE_ID_VIA_82C586_2 0x3038 ++#define PCI_DEVICE_ID_VIA_82C586_3 0x3040 ++#define PCI_DEVICE_ID_VIA_6305 0x3044 ++#define PCI_DEVICE_ID_VIA_82C596_3 0x3050 ++#define PCI_DEVICE_ID_VIA_82C596B_3 0x3051 ++#define PCI_DEVICE_ID_VIA_82C686_4 0x3057 ++#define PCI_DEVICE_ID_VIA_82C686_5 0x3058 ++#define PCI_DEVICE_ID_VIA_8233_5 0x3059 ++#define PCI_DEVICE_ID_VIA_8233_7 0x3065 ++#define PCI_DEVICE_ID_VIA_82C686_6 0x3068 ++#define PCI_DEVICE_ID_VIA_8233_0 0x3074 ++#define PCI_DEVICE_ID_VIA_8633_0 0x3091 ++#define PCI_DEVICE_ID_VIA_8367_0 0x3099 ++#define PCI_DEVICE_ID_VIA_8653_0 0x3101 ++#define PCI_DEVICE_ID_VIA_8622 0x3102 ++#define PCI_DEVICE_ID_VIA_8233C_0 0x3109 ++#define PCI_DEVICE_ID_VIA_8361 0x3112 ++#define PCI_DEVICE_ID_VIA_XM266 0x3116 ++#define PCI_DEVICE_ID_VIA_612X 0x3119 ++#define PCI_DEVICE_ID_VIA_862X_0 0x3123 ++#define PCI_DEVICE_ID_VIA_8753_0 0x3128 ++#define PCI_DEVICE_ID_VIA_8233A 0x3147 ++#define PCI_DEVICE_ID_VIA_8703_51_0 0x3148 ++#define PCI_DEVICE_ID_VIA_8237_SATA 0x3149 ++#define PCI_DEVICE_ID_VIA_XN266 0x3156 ++#define PCI_DEVICE_ID_VIA_8754C_0 0x3168 ++#define PCI_DEVICE_ID_VIA_8235 0x3177 ++#define PCI_DEVICE_ID_VIA_P4N333 0x3178 ++#define PCI_DEVICE_ID_VIA_8385_0 0x3188 ++#define PCI_DEVICE_ID_VIA_8377_0 0x3189 ++#define PCI_DEVICE_ID_VIA_8378_0 0x3205 ++#define PCI_DEVICE_ID_VIA_8783_0 0x3208 ++#define PCI_DEVICE_ID_VIA_P4M400 0x3209 ++#define PCI_DEVICE_ID_VIA_8237 0x3227 ++#define PCI_DEVICE_ID_VIA_3296_0 0x0296 ++#define PCI_DEVICE_ID_VIA_86C100A 0x6100 ++#define PCI_DEVICE_ID_VIA_8231 0x8231 ++#define PCI_DEVICE_ID_VIA_8231_4 0x8235 ++#define PCI_DEVICE_ID_VIA_8365_1 0x8305 ++#define PCI_DEVICE_ID_VIA_8371_1 0x8391 ++#define PCI_DEVICE_ID_VIA_8501_1 0x8501 ++#define PCI_DEVICE_ID_VIA_82C597_1 0x8597 ++#define PCI_DEVICE_ID_VIA_82C598_1 0x8598 ++#define PCI_DEVICE_ID_VIA_8601_1 0x8601 ++#define PCI_DEVICE_ID_VIA_8505_1 0x8605 ++#define PCI_DEVICE_ID_VIA_8633_1 0xB091 ++#define PCI_DEVICE_ID_VIA_8367_1 0xB099 ++#define PCI_DEVICE_ID_VIA_P4X266_1 0xB101 ++#define PCI_DEVICE_ID_VIA_8615_1 0xB103 ++#define PCI_DEVICE_ID_VIA_8361_1 0xB112 ++#define PCI_DEVICE_ID_VIA_8235_1 0xB168 ++#define PCI_DEVICE_ID_VIA_838X_1 0xB188 ++#define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198 ++ ++#define PCI_VENDOR_ID_SIEMENS 0x110A ++#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102 ++ ++#define PCI_VENDOR_ID_SMC2 0x1113 ++#define PCI_DEVICE_ID_SMC2_1211TX 0x1211 ++ ++#define PCI_VENDOR_ID_VORTEX 0x1119 ++#define PCI_DEVICE_ID_VORTEX_GDT60x0 0x0000 ++#define PCI_DEVICE_ID_VORTEX_GDT6000B 0x0001 ++#define PCI_DEVICE_ID_VORTEX_GDT6x10 0x0002 ++#define PCI_DEVICE_ID_VORTEX_GDT6x20 0x0003 ++#define PCI_DEVICE_ID_VORTEX_GDT6530 0x0004 ++#define PCI_DEVICE_ID_VORTEX_GDT6550 0x0005 ++#define PCI_DEVICE_ID_VORTEX_GDT6x17 0x0006 ++#define PCI_DEVICE_ID_VORTEX_GDT6x27 0x0007 ++#define PCI_DEVICE_ID_VORTEX_GDT6537 0x0008 ++#define PCI_DEVICE_ID_VORTEX_GDT6557 0x0009 ++#define PCI_DEVICE_ID_VORTEX_GDT6x15 0x000a ++#define PCI_DEVICE_ID_VORTEX_GDT6x25 0x000b ++#define PCI_DEVICE_ID_VORTEX_GDT6535 0x000c ++#define PCI_DEVICE_ID_VORTEX_GDT6555 0x000d ++#define PCI_DEVICE_ID_VORTEX_GDT6x17RP 0x0100 ++#define PCI_DEVICE_ID_VORTEX_GDT6x27RP 0x0101 ++#define PCI_DEVICE_ID_VORTEX_GDT6537RP 0x0102 ++#define PCI_DEVICE_ID_VORTEX_GDT6557RP 0x0103 ++#define PCI_DEVICE_ID_VORTEX_GDT6x11RP 0x0104 ++#define PCI_DEVICE_ID_VORTEX_GDT6x21RP 0x0105 ++#define PCI_DEVICE_ID_VORTEX_GDT6x17RP1 0x0110 ++#define PCI_DEVICE_ID_VORTEX_GDT6x27RP1 0x0111 ++#define PCI_DEVICE_ID_VORTEX_GDT6537RP1 0x0112 ++#define PCI_DEVICE_ID_VORTEX_GDT6557RP1 0x0113 ++#define PCI_DEVICE_ID_VORTEX_GDT6x11RP1 0x0114 ++#define PCI_DEVICE_ID_VORTEX_GDT6x21RP1 0x0115 ++#define PCI_DEVICE_ID_VORTEX_GDT6x17RP2 0x0120 ++#define PCI_DEVICE_ID_VORTEX_GDT6x27RP2 0x0121 ++#define PCI_DEVICE_ID_VORTEX_GDT6537RP2 0x0122 ++#define PCI_DEVICE_ID_VORTEX_GDT6557RP2 0x0123 ++#define PCI_DEVICE_ID_VORTEX_GDT6x11RP2 0x0124 ++#define PCI_DEVICE_ID_VORTEX_GDT6x21RP2 0x0125 ++ ++#define PCI_VENDOR_ID_EF 0x111a ++#define PCI_DEVICE_ID_EF_ATM_FPGA 0x0000 ++#define PCI_DEVICE_ID_EF_ATM_ASIC 0x0002 ++#define PCI_VENDOR_ID_EF_ATM_LANAI2 0x0003 ++#define PCI_VENDOR_ID_EF_ATM_LANAIHB 0x0005 ++ ++#define PCI_VENDOR_ID_IDT 0x111d ++#define PCI_DEVICE_ID_IDT_IDT77201 0x0001 ++ ++#define PCI_VENDOR_ID_FORE 0x1127 ++#define PCI_DEVICE_ID_FORE_PCA200PC 0x0210 ++#define PCI_DEVICE_ID_FORE_PCA200E 0x0300 ++ ++#define PCI_VENDOR_ID_IMAGINGTECH 0x112f ++#define PCI_DEVICE_ID_IMAGINGTECH_ICPCI 0x0000 ++ ++#define PCI_VENDOR_ID_PHILIPS 0x1131 ++#define PCI_DEVICE_ID_PHILIPS_SAA7145 0x7145 ++#define PCI_DEVICE_ID_PHILIPS_SAA7146 0x7146 ++#define PCI_DEVICE_ID_PHILIPS_SAA9730 0x9730 ++ ++#define PCI_VENDOR_ID_EICON 0x1133 ++#define PCI_DEVICE_ID_EICON_DIVA20PRO 0xe001 ++#define PCI_DEVICE_ID_EICON_DIVA20 0xe002 ++#define PCI_DEVICE_ID_EICON_DIVA20PRO_U 0xe003 ++#define PCI_DEVICE_ID_EICON_DIVA20_U 0xe004 ++#define PCI_DEVICE_ID_EICON_DIVA201 0xe005 ++#define PCI_DEVICE_ID_EICON_DIVA202 0xe00b ++#define PCI_DEVICE_ID_EICON_MAESTRA 0xe010 ++#define PCI_DEVICE_ID_EICON_MAESTRAQ 0xe012 ++#define PCI_DEVICE_ID_EICON_MAESTRAQ_U 0xe013 ++#define PCI_DEVICE_ID_EICON_MAESTRAP 0xe014 ++ ++#define PCI_VENDOR_ID_ZIATECH 0x1138 ++#define PCI_DEVICE_ID_ZIATECH_5550_HC 0x5550 ++ ++#define PCI_VENDOR_ID_CYCLONE 0x113c ++#define PCI_DEVICE_ID_CYCLONE_SDK 0x0001 ++ ++#define PCI_VENDOR_ID_ALLIANCE 0x1142 ++#define PCI_DEVICE_ID_ALLIANCE_PROMOTIO 0x3210 ++#define PCI_DEVICE_ID_ALLIANCE_PROVIDEO 0x6422 ++#define PCI_DEVICE_ID_ALLIANCE_AT24 0x6424 ++#define PCI_DEVICE_ID_ALLIANCE_AT3D 0x643d ++ ++#define PCI_VENDOR_ID_SYSKONNECT 0x1148 ++#define PCI_DEVICE_ID_SYSKONNECT_FP 0x4000 ++#define PCI_DEVICE_ID_SYSKONNECT_TR 0x4200 ++#define PCI_DEVICE_ID_SYSKONNECT_GE 0x4300 ++#define PCI_DEVICE_ID_SYSKONNECT_YU 0x4320 ++#define PCI_DEVICE_ID_SYSKONNECT_9DXX 0x4400 ++#define PCI_DEVICE_ID_SYSKONNECT_9MXX 0x4500 ++ ++#define PCI_VENDOR_ID_VMIC 0x114a ++#define PCI_DEVICE_ID_VMIC_VME 0x7587 ++ ++#define PCI_VENDOR_ID_DIGI 0x114f ++#define PCI_DEVICE_ID_DIGI_EPC 0x0002 ++#define PCI_DEVICE_ID_DIGI_RIGHTSWITCH 0x0003 ++#define PCI_DEVICE_ID_DIGI_XEM 0x0004 ++#define PCI_DEVICE_ID_DIGI_XR 0x0005 ++#define PCI_DEVICE_ID_DIGI_CX 0x0006 ++#define PCI_DEVICE_ID_DIGI_XRJ 0x0009 ++#define PCI_DEVICE_ID_DIGI_EPCJ 0x000a ++#define PCI_DEVICE_ID_DIGI_XR_920 0x0027 ++#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E 0x0070 ++#define PCI_DEVICE_ID_DIGI_DF_M_E 0x0071 ++#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A 0x0072 ++#define PCI_DEVICE_ID_DIGI_DF_M_A 0x0073 ++#define PCI_DEVICE_ID_NEO_2DB9 0x00C8 ++#define PCI_DEVICE_ID_NEO_2DB9PRI 0x00C9 ++#define PCI_DEVICE_ID_NEO_2RJ45 0x00CA ++#define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB ++ ++#define PCI_VENDOR_ID_MUTECH 0x1159 ++#define PCI_DEVICE_ID_MUTECH_MV1000 0x0001 ++ ++#define PCI_VENDOR_ID_XIRCOM 0x115d ++#define PCI_DEVICE_ID_XIRCOM_X3201_ETH 0x0003 ++#define PCI_DEVICE_ID_XIRCOM_RBM56G 0x0101 ++#define PCI_DEVICE_ID_XIRCOM_X3201_MDM 0x0103 ++ ++#define PCI_VENDOR_ID_RENDITION 0x1163 ++#define PCI_DEVICE_ID_RENDITION_VERITE 0x0001 ++#define PCI_DEVICE_ID_RENDITION_VERITE2100 0x2000 ++ ++#define PCI_VENDOR_ID_SERVERWORKS 0x1166 ++#define PCI_DEVICE_ID_SERVERWORKS_HE 0x0008 ++#define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009 ++#define PCI_DEVICE_ID_SERVERWORKS_CIOB30 0x0010 ++#define PCI_DEVICE_ID_SERVERWORKS_CMIC_HE 0x0011 ++#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017 ++#define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200 ++#define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201 ++#define PCI_DEVICE_ID_SERVERWORKS_CSB6 0x0203 ++#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211 ++#define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212 ++#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213 ++#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217 ++#define PCI_DEVICE_ID_SERVERWORKS_OSB4USB 0x0220 ++#define PCI_DEVICE_ID_SERVERWORKS_CSB5USB PCI_DEVICE_ID_SERVERWORKS_OSB4USB ++#define PCI_DEVICE_ID_SERVERWORKS_CSB6USB 0x0221 ++#define PCI_DEVICE_ID_SERVERWORKS_GCLE 0x0225 ++#define PCI_DEVICE_ID_SERVERWORKS_GCLE2 0x0227 ++#define PCI_DEVICE_ID_SERVERWORKS_CSB5ISA 0x0230 ++ ++#define PCI_VENDOR_ID_SBE 0x1176 ++#define PCI_DEVICE_ID_SBE_WANXL100 0x0301 ++#define PCI_DEVICE_ID_SBE_WANXL200 0x0302 ++#define PCI_DEVICE_ID_SBE_WANXL400 0x0104 ++ ++#define PCI_VENDOR_ID_TOSHIBA 0x1179 ++#define PCI_DEVICE_ID_TOSHIBA_PICCOLO 0x0102 ++#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1 0x0103 ++#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2 0x0105 ++#define PCI_DEVICE_ID_TOSHIBA_601 0x0601 ++#define PCI_DEVICE_ID_TOSHIBA_TOPIC95 0x060a ++#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_A 0x0603 ++#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_B 0x060a ++#define PCI_DEVICE_ID_TOSHIBA_TOPIC97 0x060f ++#define PCI_DEVICE_ID_TOSHIBA_TOPIC100 0x0617 ++ ++#define PCI_VENDOR_ID_TOSHIBA_2 0x102f ++#define PCI_DEVICE_ID_TOSHIBA_TX3927 0x000a ++#define PCI_DEVICE_ID_TOSHIBA_TC35815CF 0x0030 ++#define PCI_DEVICE_ID_TOSHIBA_TX4927 0x0180 ++#define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC 0x0108 ++ ++#define PCI_VENDOR_ID_RICOH 0x1180 ++#define PCI_DEVICE_ID_RICOH_RL5C465 0x0465 ++#define PCI_DEVICE_ID_RICOH_RL5C466 0x0466 ++#define PCI_DEVICE_ID_RICOH_RL5C475 0x0475 ++#define PCI_DEVICE_ID_RICOH_RL5C476 0x0476 ++#define PCI_DEVICE_ID_RICOH_RL5C478 0x0478 ++ ++#define PCI_VENDOR_ID_DLINK 0x1186 ++#define PCI_DEVICE_ID_DLINK_DGE510T 0x4c00 ++ ++#define PCI_VENDOR_ID_ARTOP 0x1191 ++#define PCI_DEVICE_ID_ARTOP_ATP8400 0x0004 ++#define PCI_DEVICE_ID_ARTOP_ATP850UF 0x0005 ++#define PCI_DEVICE_ID_ARTOP_ATP860 0x0006 ++#define PCI_DEVICE_ID_ARTOP_ATP860R 0x0007 ++#define PCI_DEVICE_ID_ARTOP_ATP865 0x0008 ++#define PCI_DEVICE_ID_ARTOP_ATP865R 0x0009 ++#define PCI_DEVICE_ID_ARTOP_AEC7610 0x8002 ++#define PCI_DEVICE_ID_ARTOP_AEC7612UW 0x8010 ++#define PCI_DEVICE_ID_ARTOP_AEC7612U 0x8020 ++#define PCI_DEVICE_ID_ARTOP_AEC7612S 0x8030 ++#define PCI_DEVICE_ID_ARTOP_AEC7612D 0x8040 ++#define PCI_DEVICE_ID_ARTOP_AEC7612SUW 0x8050 ++#define PCI_DEVICE_ID_ARTOP_8060 0x8060 ++#define PCI_DEVICE_ID_ARTOP_AEC67160 0x8080 ++#define PCI_DEVICE_ID_ARTOP_AEC67160_2 0x8081 ++#define PCI_DEVICE_ID_ARTOP_AEC67162 0x808a ++ ++#define PCI_VENDOR_ID_ZEITNET 0x1193 ++#define PCI_DEVICE_ID_ZEITNET_1221 0x0001 ++#define PCI_DEVICE_ID_ZEITNET_1225 0x0002 ++ ++#define PCI_VENDOR_ID_OMEGA 0x119b ++#define PCI_DEVICE_ID_OMEGA_82C092G 0x1221 ++ ++#define PCI_VENDOR_ID_FUJITSU_ME 0x119e ++#define PCI_DEVICE_ID_FUJITSU_FS155 0x0001 ++#define PCI_DEVICE_ID_FUJITSU_FS50 0x0003 ++ ++#define PCI_SUBVENDOR_ID_KEYSPAN 0x11a9 ++#define PCI_SUBDEVICE_ID_KEYSPAN_SX2 0x5334 ++ ++#define PCI_VENDOR_ID_MARVELL 0x11ab ++#define PCI_DEVICE_ID_MARVELL_GT64011 0x4146 ++#define PCI_DEVICE_ID_MARVELL_GT64111 0x4146 ++#define PCI_DEVICE_ID_MARVELL_GT64260 0x6430 ++#define PCI_DEVICE_ID_MARVELL_MV64360 0x6460 ++#define PCI_DEVICE_ID_MARVELL_MV64460 0x6480 ++#define PCI_DEVICE_ID_MARVELL_GT96100 0x9652 ++#define PCI_DEVICE_ID_MARVELL_GT96100A 0x9653 ++ ++#define PCI_VENDOR_ID_LITEON 0x11ad ++#define PCI_DEVICE_ID_LITEON_LNE100TX 0x0002 ++ ++#define PCI_VENDOR_ID_V3 0x11b0 ++#define PCI_DEVICE_ID_V3_V960 0x0001 ++#define PCI_DEVICE_ID_V3_V350 0x0001 ++#define PCI_DEVICE_ID_V3_V961 0x0002 ++#define PCI_DEVICE_ID_V3_V351 0x0002 ++ ++#define PCI_VENDOR_ID_NP 0x11bc ++#define PCI_DEVICE_ID_NP_PCI_FDDI 0x0001 ++ ++#define PCI_VENDOR_ID_ATT 0x11c1 ++#define PCI_DEVICE_ID_ATT_L56XMF 0x0440 ++#define PCI_DEVICE_ID_ATT_VENUS_MODEM 0x480 ++ ++#define PCI_VENDOR_ID_NEC2 0x11c3 /* NEC (2nd) */ ++ ++#define PCI_VENDOR_ID_SPECIALIX 0x11cb ++#define PCI_DEVICE_ID_SPECIALIX_IO8 0x2000 ++#define PCI_DEVICE_ID_SPECIALIX_XIO 0x4000 ++#define PCI_DEVICE_ID_SPECIALIX_RIO 0x8000 ++#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004 ++ ++#define PCI_VENDOR_ID_AURAVISION 0x11d1 ++#define PCI_DEVICE_ID_AURAVISION_VXP524 0x01f7 ++ ++#define PCI_VENDOR_ID_ANALOG_DEVICES 0x11d4 ++#define PCI_DEVICE_ID_AD1889JS 0x1889 ++ ++#define PCI_VENDOR_ID_IKON 0x11d5 ++#define PCI_DEVICE_ID_IKON_10115 0x0115 ++#define PCI_DEVICE_ID_IKON_10117 0x0117 ++ ++#define PCI_VENDOR_ID_SEGA 0x11db ++#define PCI_DEVICE_ID_SEGA_BBA 0x1234 ++ ++#define PCI_VENDOR_ID_ZORAN 0x11de ++#define PCI_DEVICE_ID_ZORAN_36057 0x6057 ++#define PCI_DEVICE_ID_ZORAN_36120 0x6120 ++ ++#define PCI_VENDOR_ID_KINETIC 0x11f4 ++#define PCI_DEVICE_ID_KINETIC_2915 0x2915 ++ ++#define PCI_VENDOR_ID_COMPEX 0x11f6 ++#define PCI_DEVICE_ID_COMPEX_ENET100VG4 0x0112 ++#define PCI_DEVICE_ID_COMPEX_RL2000 0x1401 ++ ++#define PCI_VENDOR_ID_RP 0x11fe ++#define PCI_DEVICE_ID_RP32INTF 0x0001 ++#define PCI_DEVICE_ID_RP8INTF 0x0002 ++#define PCI_DEVICE_ID_RP16INTF 0x0003 ++#define PCI_DEVICE_ID_RP4QUAD 0x0004 ++#define PCI_DEVICE_ID_RP8OCTA 0x0005 ++#define PCI_DEVICE_ID_RP8J 0x0006 ++#define PCI_DEVICE_ID_RP4J 0x0007 ++#define PCI_DEVICE_ID_RP8SNI 0x0008 ++#define PCI_DEVICE_ID_RP16SNI 0x0009 ++#define PCI_DEVICE_ID_RPP4 0x000A ++#define PCI_DEVICE_ID_RPP8 0x000B ++#define PCI_DEVICE_ID_RP8M 0x000C ++#define PCI_DEVICE_ID_RP4M 0x000D ++#define PCI_DEVICE_ID_RP2_232 0x000E ++#define PCI_DEVICE_ID_RP2_422 0x000F ++#define PCI_DEVICE_ID_URP32INTF 0x0801 ++#define PCI_DEVICE_ID_URP8INTF 0x0802 ++#define PCI_DEVICE_ID_URP16INTF 0x0803 ++#define PCI_DEVICE_ID_URP8OCTA 0x0805 ++#define PCI_DEVICE_ID_UPCI_RM3_8PORT 0x080C ++#define PCI_DEVICE_ID_UPCI_RM3_4PORT 0x080D ++#define PCI_DEVICE_ID_CRP16INTF 0x0903 ++ ++#define PCI_VENDOR_ID_CYCLADES 0x120e ++#define PCI_DEVICE_ID_CYCLOM_Y_Lo 0x0100 ++#define PCI_DEVICE_ID_CYCLOM_Y_Hi 0x0101 ++#define PCI_DEVICE_ID_CYCLOM_4Y_Lo 0x0102 ++#define PCI_DEVICE_ID_CYCLOM_4Y_Hi 0x0103 ++#define PCI_DEVICE_ID_CYCLOM_8Y_Lo 0x0104 ++#define PCI_DEVICE_ID_CYCLOM_8Y_Hi 0x0105 ++#define PCI_DEVICE_ID_CYCLOM_Z_Lo 0x0200 ++#define PCI_DEVICE_ID_CYCLOM_Z_Hi 0x0201 ++#define PCI_DEVICE_ID_PC300_RX_2 0x0300 ++#define PCI_DEVICE_ID_PC300_RX_1 0x0301 ++#define PCI_DEVICE_ID_PC300_TE_2 0x0310 ++#define PCI_DEVICE_ID_PC300_TE_1 0x0311 ++#define PCI_DEVICE_ID_PC300_TE_M_2 0x0320 ++#define PCI_DEVICE_ID_PC300_TE_M_1 0x0321 ++ ++/* Allied Telesyn */ ++#define PCI_VENDOR_ID_AT 0x1259 ++#define PCI_SUBDEVICE_ID_AT_2701FX 0x2703 ++ ++#define PCI_VENDOR_ID_ESSENTIAL 0x120f ++#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER 0x0001 ++ ++#define PCI_VENDOR_ID_O2 0x1217 ++#define PCI_DEVICE_ID_O2_6729 0x6729 ++#define PCI_DEVICE_ID_O2_6730 0x673a ++#define PCI_DEVICE_ID_O2_6832 0x6832 ++#define PCI_DEVICE_ID_O2_6836 0x6836 ++ ++#define PCI_VENDOR_ID_3DFX 0x121a ++#define PCI_DEVICE_ID_3DFX_VOODOO 0x0001 ++#define PCI_DEVICE_ID_3DFX_VOODOO2 0x0002 ++#define PCI_DEVICE_ID_3DFX_BANSHEE 0x0003 ++#define PCI_DEVICE_ID_3DFX_VOODOO3 0x0005 ++#define PCI_DEVICE_ID_3DFX_VOODOO5 0x0009 ++ ++#define PCI_VENDOR_ID_SIGMADES 0x1236 ++#define PCI_DEVICE_ID_SIGMADES_6425 0x6401 ++ ++#define PCI_VENDOR_ID_CCUBE 0x123f ++ ++#define PCI_VENDOR_ID_AVM 0x1244 ++#define PCI_DEVICE_ID_AVM_B1 0x0700 ++#define PCI_DEVICE_ID_AVM_C4 0x0800 ++#define PCI_DEVICE_ID_AVM_A1 0x0a00 ++#define PCI_DEVICE_ID_AVM_A1_V2 0x0e00 ++#define PCI_DEVICE_ID_AVM_C2 0x1100 ++#define PCI_DEVICE_ID_AVM_T1 0x1200 ++ ++#define PCI_VENDOR_ID_DIPIX 0x1246 ++ ++#define PCI_VENDOR_ID_STALLION 0x124d ++#define PCI_DEVICE_ID_STALLION_ECHPCI832 0x0000 ++#define PCI_DEVICE_ID_STALLION_ECHPCI864 0x0002 ++#define PCI_DEVICE_ID_STALLION_EIOPCI 0x0003 ++ ++#define PCI_VENDOR_ID_OPTIBASE 0x1255 ++#define PCI_DEVICE_ID_OPTIBASE_FORGE 0x1110 ++#define PCI_DEVICE_ID_OPTIBASE_FUSION 0x1210 ++#define PCI_DEVICE_ID_OPTIBASE_VPLEX 0x2110 ++#define PCI_DEVICE_ID_OPTIBASE_VPLEXCC 0x2120 ++#define PCI_DEVICE_ID_OPTIBASE_VQUEST 0x2130 ++ ++/* Allied Telesyn */ ++#define PCI_VENDOR_ID_AT 0x1259 ++#define PCI_SUBDEVICE_ID_AT_2700FX 0x2701 ++#define PCI_SUBDEVICE_ID_AT_2701FX 0x2703 ++ ++#define PCI_VENDOR_ID_ESS 0x125d ++#define PCI_DEVICE_ID_ESS_ESS1968 0x1968 ++#define PCI_DEVICE_ID_ESS_AUDIOPCI 0x1969 ++#define PCI_DEVICE_ID_ESS_ESS1978 0x1978 ++ ++#define PCI_VENDOR_ID_SATSAGEM 0x1267 ++#define PCI_DEVICE_ID_SATSAGEM_NICCY 0x1016 ++#define PCI_DEVICE_ID_SATSAGEM_PCR2101 0x5352 ++#define PCI_DEVICE_ID_SATSAGEM_TELSATTURBO 0x5a4b ++ ++#define PCI_VENDOR_ID_HUGHES 0x1273 ++#define PCI_DEVICE_ID_HUGHES_DIRECPC 0x0002 ++ ++#define PCI_VENDOR_ID_ENSONIQ 0x1274 ++#define PCI_DEVICE_ID_ENSONIQ_CT5880 0x5880 ++#define PCI_DEVICE_ID_ENSONIQ_ES1370 0x5000 ++#define PCI_DEVICE_ID_ENSONIQ_ES1371 0x1371 ++ ++#define PCI_VENDOR_ID_TRANSMETA 0x1279 ++#define PCI_DEVICE_ID_EFFICEON 0x0060 ++ ++#define PCI_VENDOR_ID_ROCKWELL 0x127A ++ ++#define PCI_VENDOR_ID_ITE 0x1283 ++#define PCI_DEVICE_ID_ITE_IT8172G 0x8172 ++#define PCI_DEVICE_ID_ITE_IT8172G_AUDIO 0x0801 ++#define PCI_DEVICE_ID_ITE_8872 0x8872 ++#define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886 ++ ++/* formerly Platform Tech */ ++#define PCI_VENDOR_ID_ESS_OLD 0x1285 ++#define PCI_DEVICE_ID_ESS_ESS0100 0x0100 ++ ++#define PCI_VENDOR_ID_ALTEON 0x12ae ++#define PCI_DEVICE_ID_ALTEON_ACENIC 0x0001 ++ ++#define PCI_VENDOR_ID_USR 0x12B9 ++ ++#define PCI_SUBVENDOR_ID_CONNECT_TECH 0x12c4 ++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232 0x0001 ++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232 0x0002 ++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232 0x0003 ++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485 0x0004 ++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4 0x0005 ++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485 0x0006 ++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2 0x0007 ++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485 0x0008 ++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6 0x0009 ++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1 0x000A ++#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1 0x000B ++ ++#define PCI_VENDOR_ID_PICTUREL 0x12c5 ++#define PCI_DEVICE_ID_PICTUREL_PCIVST 0x0081 ++ ++#define PCI_VENDOR_ID_NVIDIA_SGS 0x12d2 ++#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018 ++ ++#define PCI_SUBVENDOR_ID_CHASE_PCIFAST 0x12E0 ++#define PCI_SUBDEVICE_ID_CHASE_PCIFAST4 0x0031 ++#define PCI_SUBDEVICE_ID_CHASE_PCIFAST8 0x0021 ++#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16 0x0011 ++#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC 0x0041 ++#define PCI_SUBVENDOR_ID_CHASE_PCIRAS 0x124D ++#define PCI_SUBDEVICE_ID_CHASE_PCIRAS4 0xF001 ++#define PCI_SUBDEVICE_ID_CHASE_PCIRAS8 0xF010 ++ ++#define PCI_VENDOR_ID_AUREAL 0x12eb ++#define PCI_DEVICE_ID_AUREAL_VORTEX_1 0x0001 ++#define PCI_DEVICE_ID_AUREAL_VORTEX_2 0x0002 ++#define PCI_DEVICE_ID_AUREAL_ADVANTAGE 0x0003 ++ ++#define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8 ++#define PCI_DEVICE_ID_LML_33R10 0x8a02 ++ ++#define PCI_VENDOR_ID_CBOARDS 0x1307 ++#define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001 ++ ++#define PCI_VENDOR_ID_SIIG 0x131f ++#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 ++#define PCI_DEVICE_ID_SIIG_1S_10x_650 0x1001 ++#define PCI_DEVICE_ID_SIIG_1S_10x_850 0x1002 ++#define PCI_DEVICE_ID_SIIG_1S1P_10x_550 0x1010 ++#define PCI_DEVICE_ID_SIIG_1S1P_10x_650 0x1011 ++#define PCI_DEVICE_ID_SIIG_1S1P_10x_850 0x1012 ++#define PCI_DEVICE_ID_SIIG_1P_10x 0x1020 ++#define PCI_DEVICE_ID_SIIG_2P_10x 0x1021 ++#define PCI_DEVICE_ID_SIIG_2S_10x_550 0x1030 ++#define PCI_DEVICE_ID_SIIG_2S_10x_650 0x1031 ++#define PCI_DEVICE_ID_SIIG_2S_10x_850 0x1032 ++#define PCI_DEVICE_ID_SIIG_2S1P_10x_550 0x1034 ++#define PCI_DEVICE_ID_SIIG_2S1P_10x_650 0x1035 ++#define PCI_DEVICE_ID_SIIG_2S1P_10x_850 0x1036 ++#define PCI_DEVICE_ID_SIIG_4S_10x_550 0x1050 ++#define PCI_DEVICE_ID_SIIG_4S_10x_650 0x1051 ++#define PCI_DEVICE_ID_SIIG_4S_10x_850 0x1052 ++#define PCI_DEVICE_ID_SIIG_1S_20x_550 0x2000 ++#define PCI_DEVICE_ID_SIIG_1S_20x_650 0x2001 ++#define PCI_DEVICE_ID_SIIG_1S_20x_850 0x2002 ++#define PCI_DEVICE_ID_SIIG_1P_20x 0x2020 ++#define PCI_DEVICE_ID_SIIG_2P_20x 0x2021 ++#define PCI_DEVICE_ID_SIIG_2S_20x_550 0x2030 ++#define PCI_DEVICE_ID_SIIG_2S_20x_650 0x2031 ++#define PCI_DEVICE_ID_SIIG_2S_20x_850 0x2032 ++#define PCI_DEVICE_ID_SIIG_2P1S_20x_550 0x2040 ++#define PCI_DEVICE_ID_SIIG_2P1S_20x_650 0x2041 ++#define PCI_DEVICE_ID_SIIG_2P1S_20x_850 0x2042 ++#define PCI_DEVICE_ID_SIIG_1S1P_20x_550 0x2010 ++#define PCI_DEVICE_ID_SIIG_1S1P_20x_650 0x2011 ++#define PCI_DEVICE_ID_SIIG_1S1P_20x_850 0x2012 ++#define PCI_DEVICE_ID_SIIG_4S_20x_550 0x2050 ++#define PCI_DEVICE_ID_SIIG_4S_20x_650 0x2051 ++#define PCI_DEVICE_ID_SIIG_4S_20x_850 0x2052 ++#define PCI_DEVICE_ID_SIIG_2S1P_20x_550 0x2060 ++#define PCI_DEVICE_ID_SIIG_2S1P_20x_650 0x2061 ++#define PCI_DEVICE_ID_SIIG_2S1P_20x_850 0x2062 ++ ++#define PCI_VENDOR_ID_RADISYS 0x1331 ++#define PCI_DEVICE_ID_RADISYS_ENP2611 0x0030 ++ ++#define PCI_VENDOR_ID_DOMEX 0x134a ++#define PCI_DEVICE_ID_DOMEX_DMX3191D 0x0001 ++ ++#define PCI_VENDOR_ID_QUATECH 0x135C ++#define PCI_DEVICE_ID_QUATECH_QSC100 0x0010 ++#define PCI_DEVICE_ID_QUATECH_DSC100 0x0020 ++#define PCI_DEVICE_ID_QUATECH_DSC200 0x0030 ++#define PCI_DEVICE_ID_QUATECH_QSC200 0x0040 ++#define PCI_DEVICE_ID_QUATECH_ESC100D 0x0050 ++#define PCI_DEVICE_ID_QUATECH_ESC100M 0x0060 ++ ++#define PCI_VENDOR_ID_SEALEVEL 0x135e ++#define PCI_DEVICE_ID_SEALEVEL_U530 0x7101 ++#define PCI_DEVICE_ID_SEALEVEL_UCOMM2 0x7201 ++#define PCI_DEVICE_ID_SEALEVEL_UCOMM422 0x7402 ++#define PCI_DEVICE_ID_SEALEVEL_UCOMM232 0x7202 ++#define PCI_DEVICE_ID_SEALEVEL_COMM4 0x7401 ++#define PCI_DEVICE_ID_SEALEVEL_COMM8 0x7801 ++#define PCI_DEVICE_ID_SEALEVEL_UCOMM8 0x7804 ++ ++#define PCI_VENDOR_ID_HYPERCOPE 0x1365 ++#define PCI_DEVICE_ID_HYPERCOPE_PLX 0x9050 ++#define PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO 0x0104 ++#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO 0x0106 ++#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO 0x0107 ++#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2 0x0108 ++#define PCI_SUBDEVICE_ID_HYPERCOPE_PLEXUS 0x0109 ++ ++#define PCI_VENDOR_ID_KAWASAKI 0x136b ++#define PCI_DEVICE_ID_MCHIP_KL5A72002 0xff01 ++ ++#define PCI_VENDOR_ID_CNET 0x1371 ++#define PCI_DEVICE_ID_CNET_GIGACARD 0x434e ++ ++#define PCI_VENDOR_ID_LMC 0x1376 ++#define PCI_DEVICE_ID_LMC_HSSI 0x0003 ++#define PCI_DEVICE_ID_LMC_DS3 0x0004 ++#define PCI_DEVICE_ID_LMC_SSI 0x0005 ++#define PCI_DEVICE_ID_LMC_T1 0x0006 ++ ++#define PCI_VENDOR_ID_NETGEAR 0x1385 ++#define PCI_DEVICE_ID_NETGEAR_GA620 0x620a ++#define PCI_DEVICE_ID_NETGEAR_GA622 0x622a ++ ++#define PCI_VENDOR_ID_APPLICOM 0x1389 ++#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001 ++#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002 ++#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003 ++ ++#define PCI_VENDOR_ID_MOXA 0x1393 ++#define PCI_DEVICE_ID_MOXA_RC7000 0x0001 ++#define PCI_DEVICE_ID_MOXA_CP102 0x1020 ++#define PCI_DEVICE_ID_MOXA_CP102UL 0x1021 ++#define PCI_DEVICE_ID_MOXA_CP102U 0x1022 ++#define PCI_DEVICE_ID_MOXA_C104 0x1040 ++#define PCI_DEVICE_ID_MOXA_CP104U 0x1041 ++#define PCI_DEVICE_ID_MOXA_CP104JU 0x1042 ++#define PCI_DEVICE_ID_MOXA_CT114 0x1140 ++#define PCI_DEVICE_ID_MOXA_CP114 0x1141 ++#define PCI_DEVICE_ID_MOXA_CP118U 0x1180 ++#define PCI_DEVICE_ID_MOXA_CP132 0x1320 ++#define PCI_DEVICE_ID_MOXA_CP132U 0x1321 ++#define PCI_DEVICE_ID_MOXA_CP134U 0x1340 ++#define PCI_DEVICE_ID_MOXA_C168 0x1680 ++#define PCI_DEVICE_ID_MOXA_CP168U 0x1681 ++#define PCI_DEVICE_ID_MOXA_CP204J 0x2040 ++#define PCI_DEVICE_ID_MOXA_C218 0x2180 ++#define PCI_DEVICE_ID_MOXA_C320 0x3200 ++ ++#define PCI_VENDOR_ID_CCD 0x1397 ++#define PCI_DEVICE_ID_CCD_2BD0 0x2bd0 ++#define PCI_DEVICE_ID_CCD_B000 0xb000 ++#define PCI_DEVICE_ID_CCD_B006 0xb006 ++#define PCI_DEVICE_ID_CCD_B007 0xb007 ++#define PCI_DEVICE_ID_CCD_B008 0xb008 ++#define PCI_DEVICE_ID_CCD_B009 0xb009 ++#define PCI_DEVICE_ID_CCD_B00A 0xb00a ++#define PCI_DEVICE_ID_CCD_B00B 0xb00b ++#define PCI_DEVICE_ID_CCD_B00C 0xb00c ++#define PCI_DEVICE_ID_CCD_B100 0xb100 ++ ++#define PCI_VENDOR_ID_EXAR 0x13a8 ++#define PCI_DEVICE_ID_EXAR_XR17C152 0x0152 ++#define PCI_DEVICE_ID_EXAR_XR17C154 0x0154 ++#define PCI_DEVICE_ID_EXAR_XR17C158 0x0158 ++ ++#define PCI_VENDOR_ID_MICROGATE 0x13c0 ++#define PCI_DEVICE_ID_MICROGATE_USC 0x0010 ++#define PCI_DEVICE_ID_MICROGATE_SCC 0x0020 ++#define PCI_DEVICE_ID_MICROGATE_SCA 0x0030 ++#define PCI_DEVICE_ID_MICROGATE_USC2 0x0210 ++ ++#define PCI_VENDOR_ID_3WARE 0x13C1 ++#define PCI_DEVICE_ID_3WARE_1000 0x1000 ++#define PCI_DEVICE_ID_3WARE_7000 0x1001 ++#define PCI_DEVICE_ID_3WARE_9000 0x1002 ++ ++#define PCI_VENDOR_ID_IOMEGA 0x13ca ++#define PCI_DEVICE_ID_IOMEGA_BUZ 0x4231 ++ ++#define PCI_VENDOR_ID_ABOCOM 0x13D1 ++#define PCI_DEVICE_ID_ABOCOM_2BD1 0x2BD1 ++ ++#define PCI_VENDOR_ID_CMEDIA 0x13f6 ++#define PCI_DEVICE_ID_CMEDIA_CM8338A 0x0100 ++#define PCI_DEVICE_ID_CMEDIA_CM8338B 0x0101 ++#define PCI_DEVICE_ID_CMEDIA_CM8738 0x0111 ++#define PCI_DEVICE_ID_CMEDIA_CM8738B 0x0112 ++ ++#define PCI_VENDOR_ID_LAVA 0x1407 ++#define PCI_DEVICE_ID_LAVA_DSERIAL 0x0100 /* 2x 16550 */ ++#define PCI_DEVICE_ID_LAVA_QUATRO_A 0x0101 /* 2x 16550, half of 4 port */ ++#define PCI_DEVICE_ID_LAVA_QUATRO_B 0x0102 /* 2x 16550, half of 4 port */ ++#define PCI_DEVICE_ID_LAVA_OCTO_A 0x0180 /* 4x 16550A, half of 8 port */ ++#define PCI_DEVICE_ID_LAVA_OCTO_B 0x0181 /* 4x 16550A, half of 8 port */ ++#define PCI_DEVICE_ID_LAVA_PORT_PLUS 0x0200 /* 2x 16650 */ ++#define PCI_DEVICE_ID_LAVA_QUAD_A 0x0201 /* 2x 16650, half of 4 port */ ++#define PCI_DEVICE_ID_LAVA_QUAD_B 0x0202 /* 2x 16650, half of 4 port */ ++#define PCI_DEVICE_ID_LAVA_SSERIAL 0x0500 /* 1x 16550 */ ++#define PCI_DEVICE_ID_LAVA_PORT_650 0x0600 /* 1x 16650 */ ++#define PCI_DEVICE_ID_LAVA_PARALLEL 0x8000 ++#define PCI_DEVICE_ID_LAVA_DUAL_PAR_A 0x8002 /* The Lava Dual Parallel is */ ++#define PCI_DEVICE_ID_LAVA_DUAL_PAR_B 0x8003 /* two PCI devices on a card */ ++#define PCI_DEVICE_ID_LAVA_BOCA_IOPPAR 0x8800 ++ ++#define PCI_VENDOR_ID_TIMEDIA 0x1409 ++#define PCI_DEVICE_ID_TIMEDIA_1889 0x7168 ++ ++#define PCI_VENDOR_ID_OXSEMI 0x1415 ++#define PCI_DEVICE_ID_OXSEMI_12PCI840 0x8403 ++#define PCI_DEVICE_ID_OXSEMI_16PCI954 0x9501 ++#define PCI_DEVICE_ID_OXSEMI_16PCI95N 0x9511 ++#define PCI_DEVICE_ID_OXSEMI_16PCI954PP 0x9513 ++#define PCI_DEVICE_ID_OXSEMI_16PCI952 0x9521 ++ ++#define PCI_VENDOR_ID_SAMSUNG 0x144d ++ ++#define PCI_VENDOR_ID_AIRONET 0x14b9 ++#define PCI_DEVICE_ID_AIRONET_4800_1 0x0001 ++#define PCI_DEVICE_ID_AIRONET_4800 0x4500 // values switched? see ++#define PCI_DEVICE_ID_AIRONET_4500 0x4800 // drivers/net/aironet4500_card.c ++ ++#define PCI_VENDOR_ID_TITAN 0x14D2 ++#define PCI_DEVICE_ID_TITAN_010L 0x8001 ++#define PCI_DEVICE_ID_TITAN_100L 0x8010 ++#define PCI_DEVICE_ID_TITAN_110L 0x8011 ++#define PCI_DEVICE_ID_TITAN_200L 0x8020 ++#define PCI_DEVICE_ID_TITAN_210L 0x8021 ++#define PCI_DEVICE_ID_TITAN_400L 0x8040 ++#define PCI_DEVICE_ID_TITAN_800L 0x8080 ++#define PCI_DEVICE_ID_TITAN_100 0xA001 ++#define PCI_DEVICE_ID_TITAN_200 0xA005 ++#define PCI_DEVICE_ID_TITAN_400 0xA003 ++#define PCI_DEVICE_ID_TITAN_800B 0xA004 ++ ++#define PCI_VENDOR_ID_PANACOM 0x14d4 ++#define PCI_DEVICE_ID_PANACOM_QUADMODEM 0x0400 ++#define PCI_DEVICE_ID_PANACOM_DUALMODEM 0x0402 ++ ++#define PCI_VENDOR_ID_SIPACKETS 0x14d9 ++#define PCI_DEVICE_ID_SP_HT 0x0010 ++ ++#define PCI_VENDOR_ID_AFAVLAB 0x14db ++#define PCI_DEVICE_ID_AFAVLAB_P028 0x2180 ++#define PCI_DEVICE_ID_AFAVLAB_P030 0x2182 ++ ++#define PCI_VENDOR_ID_BROADCOM 0x14e4 ++#define PCI_DEVICE_ID_TIGON3_5752 0x1600 ++#define PCI_DEVICE_ID_TIGON3_5752M 0x1601 ++#define PCI_DEVICE_ID_TIGON3_5700 0x1644 ++#define PCI_DEVICE_ID_TIGON3_5701 0x1645 ++#define PCI_DEVICE_ID_TIGON3_5702 0x1646 ++#define PCI_DEVICE_ID_TIGON3_5703 0x1647 ++#define PCI_DEVICE_ID_TIGON3_5704 0x1648 ++#define PCI_DEVICE_ID_TIGON3_5704S_2 0x1649 ++#define PCI_DEVICE_ID_NX2_5706 0x164a ++#define PCI_DEVICE_ID_TIGON3_5702FE 0x164d ++#define PCI_DEVICE_ID_TIGON3_5705 0x1653 ++#define PCI_DEVICE_ID_TIGON3_5705_2 0x1654 ++#define PCI_DEVICE_ID_TIGON3_5720 0x1658 ++#define PCI_DEVICE_ID_TIGON3_5721 0x1659 ++#define PCI_DEVICE_ID_TIGON3_5705M 0x165d ++#define PCI_DEVICE_ID_TIGON3_5705M_2 0x165e ++#define PCI_DEVICE_ID_TIGON3_5705F 0x166e ++#define PCI_DEVICE_ID_TIGON3_5750 0x1676 ++#define PCI_DEVICE_ID_TIGON3_5751 0x1677 ++#define PCI_DEVICE_ID_TIGON3_5750M 0x167c ++#define PCI_DEVICE_ID_TIGON3_5751M 0x167d ++#define PCI_DEVICE_ID_TIGON3_5751F 0x167e ++#define PCI_DEVICE_ID_TIGON3_5782 0x1696 ++#define PCI_DEVICE_ID_TIGON3_5788 0x169c ++#define PCI_DEVICE_ID_TIGON3_5789 0x169d ++#define PCI_DEVICE_ID_TIGON3_5702X 0x16a6 ++#define PCI_DEVICE_ID_TIGON3_5703X 0x16a7 ++#define PCI_DEVICE_ID_TIGON3_5704S 0x16a8 ++#define PCI_DEVICE_ID_NX2_5706S 0x16aa ++#define PCI_DEVICE_ID_TIGON3_5702A3 0x16c6 ++#define PCI_DEVICE_ID_TIGON3_5703A3 0x16c7 ++#define PCI_DEVICE_ID_TIGON3_5781 0x16dd ++#define PCI_DEVICE_ID_TIGON3_5753 0x16f7 ++#define PCI_DEVICE_ID_TIGON3_5753M 0x16fd ++#define PCI_DEVICE_ID_TIGON3_5753F 0x16fe ++#define PCI_DEVICE_ID_TIGON3_5901 0x170d ++#define PCI_DEVICE_ID_BCM4401B1 0x170c ++#define PCI_DEVICE_ID_TIGON3_5901_2 0x170e ++#define PCI_DEVICE_ID_BCM4401 0x4401 ++#define PCI_DEVICE_ID_BCM4401B0 0x4402 ++ ++#define PCI_VENDOR_ID_TOPIC 0x151f ++#define PCI_DEVICE_ID_TOPIC_TP560 0x0000 ++ ++#define PCI_VENDOR_ID_ENE 0x1524 ++#define PCI_DEVICE_ID_ENE_1211 0x1211 ++#define PCI_DEVICE_ID_ENE_1225 0x1225 ++#define PCI_DEVICE_ID_ENE_1410 0x1410 ++#define PCI_DEVICE_ID_ENE_1420 0x1420 ++ ++#define PCI_VENDOR_ID_SYBA 0x1592 ++#define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782 ++#define PCI_DEVICE_ID_SYBA_1P_ECP 0x0783 ++ ++#define PCI_VENDOR_ID_MORETON 0x15aa ++#define PCI_DEVICE_ID_RASTEL_2PORT 0x2000 ++ ++#define PCI_VENDOR_ID_ZOLTRIX 0x15b0 ++#define PCI_DEVICE_ID_ZOLTRIX_2BD0 0x2bd0 ++ ++#define PCI_VENDOR_ID_MELLANOX 0x15b3 ++#define PCI_DEVICE_ID_MELLANOX_TAVOR 0x5a44 ++#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT 0x6278 ++#define PCI_DEVICE_ID_MELLANOX_ARBEL 0x6282 ++#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c ++#define PCI_DEVICE_ID_MELLANOX_SINAI 0x6274 ++ ++#define PCI_VENDOR_ID_PDC 0x15e9 ++#define PCI_DEVICE_ID_PDC_1841 0x1841 ++ ++#define PCI_VENDOR_ID_MACROLINK 0x15ed ++#define PCI_DEVICE_ID_MACROLINK_MCCS8 0x1000 ++#define PCI_DEVICE_ID_MACROLINK_MCCS 0x1001 ++#define PCI_DEVICE_ID_MACROLINK_MCCS8H 0x1002 ++#define PCI_DEVICE_ID_MACROLINK_MCCSH 0x1003 ++#define PCI_DEVICE_ID_MACROLINK_MCCR8 0x2000 ++#define PCI_DEVICE_ID_MACROLINK_MCCR 0x2001 ++ ++#define PCI_VENDOR_ID_FARSITE 0x1619 ++#define PCI_DEVICE_ID_FARSITE_T2P 0x0400 ++#define PCI_DEVICE_ID_FARSITE_T4P 0x0440 ++#define PCI_DEVICE_ID_FARSITE_T1U 0x0610 ++#define PCI_DEVICE_ID_FARSITE_T2U 0x0620 ++#define PCI_DEVICE_ID_FARSITE_T4U 0x0640 ++#define PCI_DEVICE_ID_FARSITE_TE1 0x1610 ++#define PCI_DEVICE_ID_FARSITE_TE1C 0x1612 ++ ++#define PCI_VENDOR_ID_SIBYTE 0x166d ++#define PCI_DEVICE_ID_BCM1250_HT 0x0002 ++ ++#define PCI_VENDOR_ID_LINKSYS 0x1737 ++#define PCI_DEVICE_ID_LINKSYS_EG1032 0x1032 ++#define PCI_DEVICE_ID_LINKSYS_EG1064 0x1064 ++ ++#define PCI_VENDOR_ID_ALTIMA 0x173b ++#define PCI_DEVICE_ID_ALTIMA_AC1000 0x03e8 ++#define PCI_DEVICE_ID_ALTIMA_AC1001 0x03e9 ++#define PCI_DEVICE_ID_ALTIMA_AC9100 0x03ea ++#define PCI_DEVICE_ID_ALTIMA_AC1003 0x03eb ++ ++#define PCI_VENDOR_ID_S2IO 0x17d5 ++#define PCI_DEVICE_ID_S2IO_WIN 0x5731 ++#define PCI_DEVICE_ID_S2IO_UNI 0x5831 ++#define PCI_DEVICE_ID_HERC_WIN 0x5732 ++#define PCI_DEVICE_ID_HERC_UNI 0x5832 ++ ++#define PCI_VENDOR_ID_INFINICON 0x1820 ++ ++#define PCI_VENDOR_ID_TOPSPIN 0x1867 ++ ++#define PCI_VENDOR_ID_TDI 0x192E ++#define PCI_DEVICE_ID_TDI_EHCI 0x0101 ++ ++#define PCI_VENDOR_ID_SYMPHONY 0x1c1c ++#define PCI_DEVICE_ID_SYMPHONY_101 0x0001 ++ ++#define PCI_VENDOR_ID_TEKRAM 0x1de1 ++#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 ++ ++#define PCI_VENDOR_ID_HINT 0x3388 ++#define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013 ++ ++#define PCI_VENDOR_ID_3DLABS 0x3d3d ++#define PCI_DEVICE_ID_3DLABS_300SX 0x0001 ++#define PCI_DEVICE_ID_3DLABS_500TX 0x0002 ++#define PCI_DEVICE_ID_3DLABS_DELTA 0x0003 ++#define PCI_DEVICE_ID_3DLABS_PERMEDIA 0x0004 ++#define PCI_DEVICE_ID_3DLABS_MX 0x0006 ++#define PCI_DEVICE_ID_3DLABS_PERMEDIA2 0x0007 ++#define PCI_DEVICE_ID_3DLABS_GAMMA 0x0008 ++#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V 0x0009 ++ ++#define PCI_VENDOR_ID_AVANCE 0x4005 ++#define PCI_DEVICE_ID_AVANCE_ALG2064 0x2064 ++#define PCI_DEVICE_ID_AVANCE_2302 0x2302 ++ ++#define PCI_VENDOR_ID_AKS 0x416c ++#define PCI_DEVICE_ID_AKS_ALADDINCARD 0x0100 ++#define PCI_DEVICE_ID_AKS_CPC 0x0200 ++ ++#define PCI_VENDOR_ID_REDCREEK 0x4916 ++#define PCI_DEVICE_ID_RC45 0x1960 ++ ++#define PCI_VENDOR_ID_NETVIN 0x4a14 ++#define PCI_DEVICE_ID_NETVIN_NV5000SC 0x5000 ++ ++#define PCI_VENDOR_ID_S3 0x5333 ++#define PCI_DEVICE_ID_S3_PLATO_PXS 0x0551 ++#define PCI_DEVICE_ID_S3_ViRGE 0x5631 ++#define PCI_DEVICE_ID_S3_TRIO 0x8811 ++#define PCI_DEVICE_ID_S3_AURORA64VP 0x8812 ++#define PCI_DEVICE_ID_S3_TRIO64UVP 0x8814 ++#define PCI_DEVICE_ID_S3_ViRGE_VX 0x883d ++#define PCI_DEVICE_ID_S3_868 0x8880 ++#define PCI_DEVICE_ID_S3_928 0x88b0 ++#define PCI_DEVICE_ID_S3_864_1 0x88c0 ++#define PCI_DEVICE_ID_S3_864_2 0x88c1 ++#define PCI_DEVICE_ID_S3_964_1 0x88d0 ++#define PCI_DEVICE_ID_S3_964_2 0x88d1 ++#define PCI_DEVICE_ID_S3_968 0x88f0 ++#define PCI_DEVICE_ID_S3_TRIO64V2 0x8901 ++#define PCI_DEVICE_ID_S3_PLATO_PXG 0x8902 ++#define PCI_DEVICE_ID_S3_ViRGE_DXGX 0x8a01 ++#define PCI_DEVICE_ID_S3_ViRGE_GX2 0x8a10 ++#define PCI_DEVICE_ID_S3_SAVAGE4 0x8a25 ++#define PCI_DEVICE_ID_S3_ViRGE_MX 0x8c01 ++#define PCI_DEVICE_ID_S3_ViRGE_MXP 0x8c02 ++#define PCI_DEVICE_ID_S3_ViRGE_MXPMV 0x8c03 ++#define PCI_DEVICE_ID_S3_PROSAVAGE8 0x8d04 ++#define PCI_DEVICE_ID_S3_SONICVIBES 0xca00 ++ ++#define PCI_VENDOR_ID_DUNORD 0x5544 ++#define PCI_DEVICE_ID_DUNORD_I3000 0x0001 ++ ++#define PCI_VENDOR_ID_DCI 0x6666 ++#define PCI_DEVICE_ID_DCI_PCCOM4 0x0001 ++#define PCI_DEVICE_ID_DCI_PCCOM8 0x0002 ++ ++#define PCI_VENDOR_ID_DUNORD 0x5544 ++#define PCI_DEVICE_ID_DUNORD_I3000 0x0001 ++ ++#define PCI_VENDOR_ID_GENROCO 0x5555 ++#define PCI_DEVICE_ID_GENROCO_HFP832 0x0003 ++ ++#define PCI_VENDOR_ID_INTEL 0x8086 ++#define PCI_DEVICE_ID_INTEL_EESSC 0x0008 ++#define PCI_DEVICE_ID_INTEL_21145 0x0039 ++#define PCI_DEVICE_ID_INTEL_82375 0x0482 ++#define PCI_DEVICE_ID_INTEL_82424 0x0483 ++#define PCI_DEVICE_ID_INTEL_82378 0x0484 ++#define PCI_DEVICE_ID_INTEL_82430 0x0486 ++#define PCI_DEVICE_ID_INTEL_82434 0x04a3 ++#define PCI_DEVICE_ID_INTEL_I960 0x0960 ++#define PCI_DEVICE_ID_INTEL_I960RM 0x0962 ++#define PCI_DEVICE_ID_INTEL_82562ET 0x1031 ++#define PCI_DEVICE_ID_INTEL_82801CAM 0x1038 ++#define PCI_DEVICE_ID_INTEL_82815_MC 0x1130 ++#define PCI_DEVICE_ID_INTEL_82815_AB 0x1131 ++#define PCI_DEVICE_ID_INTEL_82815_CGC 0x1132 ++#define PCI_DEVICE_ID_INTEL_82559ER 0x1209 ++#define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221 ++#define PCI_DEVICE_ID_INTEL_82092AA_1 0x1222 ++#define PCI_DEVICE_ID_INTEL_7116 0x1223 ++#define PCI_DEVICE_ID_INTEL_7505_0 0x2550 ++#define PCI_DEVICE_ID_INTEL_7505_1 0x2552 ++#define PCI_DEVICE_ID_INTEL_7205_0 0x255d ++#define PCI_DEVICE_ID_INTEL_82596 0x1226 ++#define PCI_DEVICE_ID_INTEL_82865 0x1227 ++#define PCI_DEVICE_ID_INTEL_82557 0x1229 ++#define PCI_DEVICE_ID_INTEL_82437 0x122d ++#define PCI_DEVICE_ID_INTEL_82371FB_0 0x122e ++#define PCI_DEVICE_ID_INTEL_82371FB_1 0x1230 ++#define PCI_DEVICE_ID_INTEL_82371MX 0x1234 ++#define PCI_DEVICE_ID_INTEL_82437MX 0x1235 ++#define PCI_DEVICE_ID_INTEL_82441 0x1237 ++#define PCI_DEVICE_ID_INTEL_82380FB 0x124b ++#define PCI_DEVICE_ID_INTEL_82439 0x1250 ++#define PCI_DEVICE_ID_INTEL_80960_RP 0x1960 ++#define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21 ++#define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30 ++#define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410 ++#define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411 ++#define PCI_DEVICE_ID_INTEL_82801AA_2 0x2412 ++#define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413 ++#define PCI_DEVICE_ID_INTEL_82801AA_5 0x2415 ++#define PCI_DEVICE_ID_INTEL_82801AA_6 0x2416 ++#define PCI_DEVICE_ID_INTEL_82801AA_8 0x2418 ++#define PCI_DEVICE_ID_INTEL_82801AB_0 0x2420 ++#define PCI_DEVICE_ID_INTEL_82801AB_1 0x2421 ++#define PCI_DEVICE_ID_INTEL_82801AB_2 0x2422 ++#define PCI_DEVICE_ID_INTEL_82801AB_3 0x2423 ++#define PCI_DEVICE_ID_INTEL_82801AB_5 0x2425 ++#define PCI_DEVICE_ID_INTEL_82801AB_6 0x2426 ++#define PCI_DEVICE_ID_INTEL_82801AB_8 0x2428 ++#define PCI_DEVICE_ID_INTEL_82801BA_0 0x2440 ++#define PCI_DEVICE_ID_INTEL_82801BA_1 0x2442 ++#define PCI_DEVICE_ID_INTEL_82801BA_2 0x2443 ++#define PCI_DEVICE_ID_INTEL_82801BA_3 0x2444 ++#define PCI_DEVICE_ID_INTEL_82801BA_4 0x2445 ++#define PCI_DEVICE_ID_INTEL_82801BA_5 0x2446 ++#define PCI_DEVICE_ID_INTEL_82801BA_6 0x2448 ++#define PCI_DEVICE_ID_INTEL_82801BA_7 0x2449 ++#define PCI_DEVICE_ID_INTEL_82801BA_8 0x244a ++#define PCI_DEVICE_ID_INTEL_82801BA_9 0x244b ++#define PCI_DEVICE_ID_INTEL_82801BA_10 0x244c ++#define PCI_DEVICE_ID_INTEL_82801BA_11 0x244e ++#define PCI_DEVICE_ID_INTEL_82801E_0 0x2450 ++#define PCI_DEVICE_ID_INTEL_82801E_2 0x2452 ++#define PCI_DEVICE_ID_INTEL_82801E_3 0x2453 ++#define PCI_DEVICE_ID_INTEL_82801E_9 0x2459 ++#define PCI_DEVICE_ID_INTEL_82801E_11 0x245b ++#define PCI_DEVICE_ID_INTEL_82801E_13 0x245d ++#define PCI_DEVICE_ID_INTEL_82801E_14 0x245e ++#define PCI_DEVICE_ID_INTEL_82801CA_0 0x2480 ++#define PCI_DEVICE_ID_INTEL_82801CA_2 0x2482 ++#define PCI_DEVICE_ID_INTEL_82801CA_3 0x2483 ++#define PCI_DEVICE_ID_INTEL_82801CA_4 0x2484 ++#define PCI_DEVICE_ID_INTEL_82801CA_5 0x2485 ++#define PCI_DEVICE_ID_INTEL_82801CA_6 0x2486 ++#define PCI_DEVICE_ID_INTEL_82801CA_7 0x2487 ++#define PCI_DEVICE_ID_INTEL_82801CA_10 0x248a ++#define PCI_DEVICE_ID_INTEL_82801CA_11 0x248b ++#define PCI_DEVICE_ID_INTEL_82801CA_12 0x248c ++#define PCI_DEVICE_ID_INTEL_82801DB_0 0x24c0 ++#define PCI_DEVICE_ID_INTEL_82801DB_1 0x24c1 ++#define PCI_DEVICE_ID_INTEL_82801DB_2 0x24c2 ++#define PCI_DEVICE_ID_INTEL_82801DB_3 0x24c3 ++#define PCI_DEVICE_ID_INTEL_82801DB_4 0x24c4 ++#define PCI_DEVICE_ID_INTEL_82801DB_5 0x24c5 ++#define PCI_DEVICE_ID_INTEL_82801DB_6 0x24c6 ++#define PCI_DEVICE_ID_INTEL_82801DB_7 0x24c7 ++#define PCI_DEVICE_ID_INTEL_82801DB_9 0x24c9 ++#define PCI_DEVICE_ID_INTEL_82801DB_10 0x24ca ++#define PCI_DEVICE_ID_INTEL_82801DB_11 0x24cb ++#define PCI_DEVICE_ID_INTEL_82801DB_12 0x24cc ++#define PCI_DEVICE_ID_INTEL_82801DB_13 0x24cd ++#define PCI_DEVICE_ID_INTEL_82801EB_0 0x24d0 ++#define PCI_DEVICE_ID_INTEL_82801EB_1 0x24d1 ++#define PCI_DEVICE_ID_INTEL_82801EB_2 0x24d2 ++#define PCI_DEVICE_ID_INTEL_82801EB_3 0x24d3 ++#define PCI_DEVICE_ID_INTEL_82801EB_4 0x24d4 ++#define PCI_DEVICE_ID_INTEL_82801EB_5 0x24d5 ++#define PCI_DEVICE_ID_INTEL_82801EB_6 0x24d6 ++#define PCI_DEVICE_ID_INTEL_82801EB_7 0x24d7 ++#define PCI_DEVICE_ID_INTEL_82801EB_11 0x24db ++#define PCI_DEVICE_ID_INTEL_82801EB_13 0x24dd ++#define PCI_DEVICE_ID_INTEL_ESB_1 0x25a1 ++#define PCI_DEVICE_ID_INTEL_ESB_2 0x25a2 ++#define PCI_DEVICE_ID_INTEL_ESB_3 0x25a3 ++#define PCI_DEVICE_ID_INTEL_ESB_31 0x25b0 ++#define PCI_DEVICE_ID_INTEL_ESB_4 0x25a4 ++#define PCI_DEVICE_ID_INTEL_ESB_5 0x25a6 ++#define PCI_DEVICE_ID_INTEL_ESB_6 0x25a7 ++#define PCI_DEVICE_ID_INTEL_ESB_7 0x25a9 ++#define PCI_DEVICE_ID_INTEL_ESB_8 0x25aa ++#define PCI_DEVICE_ID_INTEL_ESB_9 0x25ab ++#define PCI_DEVICE_ID_INTEL_ESB_11 0x25ac ++#define PCI_DEVICE_ID_INTEL_ESB_12 0x25ad ++#define PCI_DEVICE_ID_INTEL_ESB_13 0x25ae ++#define PCI_DEVICE_ID_INTEL_82820_HB 0x2500 ++#define PCI_DEVICE_ID_INTEL_82820_UP_HB 0x2501 ++#define PCI_DEVICE_ID_INTEL_82850_HB 0x2530 ++#define PCI_DEVICE_ID_INTEL_82860_HB 0x2531 ++#define PCI_DEVICE_ID_INTEL_82845G_HB 0x2560 ++#define PCI_DEVICE_ID_INTEL_82845G_IG 0x2562 ++#define PCI_DEVICE_ID_INTEL_82865_HB 0x2570 ++#define PCI_DEVICE_ID_INTEL_82865_IG 0x2572 ++#define PCI_DEVICE_ID_INTEL_82875_HB 0x2578 ++#define PCI_DEVICE_ID_INTEL_82875_IG 0x257b ++#define PCI_DEVICE_ID_INTEL_82915G_HB 0x2580 ++#define PCI_DEVICE_ID_INTEL_82915G_IG 0x2582 ++#define PCI_DEVICE_ID_INTEL_82915GM_HB 0x2590 ++#define PCI_DEVICE_ID_INTEL_82915GM_IG 0x2592 ++#define PCI_DEVICE_ID_INTEL_82945G_HB 0x2770 ++#define PCI_DEVICE_ID_INTEL_82945G_IG 0x2772 ++#define PCI_DEVICE_ID_INTEL_ICH6_0 0x2640 ++#define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641 ++#define PCI_DEVICE_ID_INTEL_ICH6_2 0x2642 ++#define PCI_DEVICE_ID_INTEL_ICH6_3 0x2651 ++#define PCI_DEVICE_ID_INTEL_ICH6_4 0x2652 ++#define PCI_DEVICE_ID_INTEL_ICH6_5 0x2653 ++#define PCI_DEVICE_ID_INTEL_ICH6_6 0x2658 ++#define PCI_DEVICE_ID_INTEL_ICH6_7 0x2659 ++#define PCI_DEVICE_ID_INTEL_ICH6_8 0x265a ++#define PCI_DEVICE_ID_INTEL_ICH6_9 0x265b ++#define PCI_DEVICE_ID_INTEL_ICH6_10 0x265c ++#define PCI_DEVICE_ID_INTEL_ICH6_11 0x2660 ++#define PCI_DEVICE_ID_INTEL_ICH6_12 0x2662 ++#define PCI_DEVICE_ID_INTEL_ICH6_13 0x2664 ++#define PCI_DEVICE_ID_INTEL_ICH6_14 0x2666 ++#define PCI_DEVICE_ID_INTEL_ICH6_15 0x2668 ++#define PCI_DEVICE_ID_INTEL_ICH6_16 0x266a ++#define PCI_DEVICE_ID_INTEL_ICH6_17 0x266d ++#define PCI_DEVICE_ID_INTEL_ICH6_18 0x266e ++#define PCI_DEVICE_ID_INTEL_ICH6_19 0x266f ++#define PCI_DEVICE_ID_INTEL_ESB2_0 0x2670 ++#define PCI_DEVICE_ID_INTEL_ESB2_1 0x2680 ++#define PCI_DEVICE_ID_INTEL_ESB2_2 0x2681 ++#define PCI_DEVICE_ID_INTEL_ESB2_3 0x2682 ++#define PCI_DEVICE_ID_INTEL_ESB2_4 0x2683 ++#define PCI_DEVICE_ID_INTEL_ESB2_5 0x2688 ++#define PCI_DEVICE_ID_INTEL_ESB2_6 0x2689 ++#define PCI_DEVICE_ID_INTEL_ESB2_7 0x268a ++#define PCI_DEVICE_ID_INTEL_ESB2_8 0x268b ++#define PCI_DEVICE_ID_INTEL_ESB2_9 0x268c ++#define PCI_DEVICE_ID_INTEL_ESB2_10 0x2690 ++#define PCI_DEVICE_ID_INTEL_ESB2_11 0x2692 ++#define PCI_DEVICE_ID_INTEL_ESB2_12 0x2694 ++#define PCI_DEVICE_ID_INTEL_ESB2_13 0x2696 ++#define PCI_DEVICE_ID_INTEL_ESB2_14 0x2698 ++#define PCI_DEVICE_ID_INTEL_ESB2_15 0x2699 ++#define PCI_DEVICE_ID_INTEL_ESB2_16 0x269a ++#define PCI_DEVICE_ID_INTEL_ESB2_17 0x269b ++#define PCI_DEVICE_ID_INTEL_ESB2_18 0x269e ++#define PCI_DEVICE_ID_INTEL_ICH7_0 0x27b8 ++#define PCI_DEVICE_ID_INTEL_ICH7_1 0x27b9 ++#define PCI_DEVICE_ID_INTEL_ICH7_2 0x27c0 ++#define PCI_DEVICE_ID_INTEL_ICH7_3 0x27c1 ++#define PCI_DEVICE_ID_INTEL_ICH7_30 0x27b0 ++#define PCI_DEVICE_ID_INTEL_ICH7_31 0x27bd ++#define PCI_DEVICE_ID_INTEL_ICH7_5 0x27c4 ++#define PCI_DEVICE_ID_INTEL_ICH7_6 0x27c5 ++#define PCI_DEVICE_ID_INTEL_ICH7_7 0x27c8 ++#define PCI_DEVICE_ID_INTEL_ICH7_8 0x27c9 ++#define PCI_DEVICE_ID_INTEL_ICH7_9 0x27ca ++#define PCI_DEVICE_ID_INTEL_ICH7_10 0x27cb ++#define PCI_DEVICE_ID_INTEL_ICH7_11 0x27cc ++#define PCI_DEVICE_ID_INTEL_ICH7_12 0x27d0 ++#define PCI_DEVICE_ID_INTEL_ICH7_13 0x27d2 ++#define PCI_DEVICE_ID_INTEL_ICH7_14 0x27d4 ++#define PCI_DEVICE_ID_INTEL_ICH7_15 0x27d6 ++#define PCI_DEVICE_ID_INTEL_ICH7_16 0x27d8 ++#define PCI_DEVICE_ID_INTEL_ICH7_17 0x27da ++#define PCI_DEVICE_ID_INTEL_ICH7_18 0x27dc ++#define PCI_DEVICE_ID_INTEL_ICH7_19 0x27dd ++#define PCI_DEVICE_ID_INTEL_ICH7_20 0x27de ++#define PCI_DEVICE_ID_INTEL_ICH7_21 0x27df ++#define PCI_DEVICE_ID_INTEL_ICH7_22 0x27e0 ++#define PCI_DEVICE_ID_INTEL_ICH7_23 0x27e2 ++#define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340 ++#define PCI_DEVICE_ID_INTEL_ESB2_19 0x3500 ++#define PCI_DEVICE_ID_INTEL_ESB2_20 0x3501 ++#define PCI_DEVICE_ID_INTEL_ESB2_21 0x3504 ++#define PCI_DEVICE_ID_INTEL_ESB2_22 0x3505 ++#define PCI_DEVICE_ID_INTEL_ESB2_23 0x350c ++#define PCI_DEVICE_ID_INTEL_ESB2_24 0x350d ++#define PCI_DEVICE_ID_INTEL_ESB2_25 0x3510 ++#define PCI_DEVICE_ID_INTEL_ESB2_26 0x3511 ++#define PCI_DEVICE_ID_INTEL_ESB2_27 0x3514 ++#define PCI_DEVICE_ID_INTEL_ESB2_28 0x3515 ++#define PCI_DEVICE_ID_INTEL_ESB2_29 0x3518 ++#define PCI_DEVICE_ID_INTEL_ESB2_30 0x3519 ++#define PCI_DEVICE_ID_INTEL_82830_HB 0x3575 ++#define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577 ++#define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580 ++#define PCI_DEVICE_ID_INTEL_82855GM_IG 0x3582 ++#define PCI_DEVICE_ID_INTEL_E7520_MCH 0x3590 ++#define PCI_DEVICE_ID_INTEL_E7320_MCH 0x3592 ++#define PCI_DEVICE_ID_INTEL_MCH_PA 0x3595 ++#define PCI_DEVICE_ID_INTEL_MCH_PA1 0x3596 ++#define PCI_DEVICE_ID_INTEL_MCH_PB 0x3597 ++#define PCI_DEVICE_ID_INTEL_MCH_PB1 0x3598 ++#define PCI_DEVICE_ID_INTEL_MCH_PC 0x3599 ++#define PCI_DEVICE_ID_INTEL_MCH_PC1 0x359a ++#define PCI_DEVICE_ID_INTEL_E7525_MCH 0x359e ++#define PCI_DEVICE_ID_INTEL_80310 0x530d ++#define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000 ++#define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010 ++#define PCI_DEVICE_ID_INTEL_82371SB_2 0x7020 ++#define PCI_DEVICE_ID_INTEL_82437VX 0x7030 ++#define PCI_DEVICE_ID_INTEL_82439TX 0x7100 ++#define PCI_DEVICE_ID_INTEL_82371AB_0 0x7110 ++#define PCI_DEVICE_ID_INTEL_82371AB 0x7111 ++#define PCI_DEVICE_ID_INTEL_82371AB_2 0x7112 ++#define PCI_DEVICE_ID_INTEL_82371AB_3 0x7113 ++#define PCI_DEVICE_ID_INTEL_82810_MC1 0x7120 ++#define PCI_DEVICE_ID_INTEL_82810_IG1 0x7121 ++#define PCI_DEVICE_ID_INTEL_82810_MC3 0x7122 ++#define PCI_DEVICE_ID_INTEL_82810_IG3 0x7123 ++#define PCI_DEVICE_ID_INTEL_82810E_MC 0x7124 ++#define PCI_DEVICE_ID_INTEL_82810E_IG 0x7125 ++#define PCI_DEVICE_ID_INTEL_82443LX_0 0x7180 ++#define PCI_DEVICE_ID_INTEL_82443LX_1 0x7181 ++#define PCI_DEVICE_ID_INTEL_82443BX_0 0x7190 ++#define PCI_DEVICE_ID_INTEL_82443BX_1 0x7191 ++#define PCI_DEVICE_ID_INTEL_82443BX_2 0x7192 ++#define PCI_DEVICE_ID_INTEL_440MX 0x7195 ++#define PCI_DEVICE_ID_INTEL_82443MX_0 0x7198 ++#define PCI_DEVICE_ID_INTEL_82443MX_1 0x7199 ++#define PCI_DEVICE_ID_INTEL_82443MX_2 0x719a ++#define PCI_DEVICE_ID_INTEL_82443MX_3 0x719b ++#define PCI_DEVICE_ID_INTEL_82443GX_0 0x71a0 ++#define PCI_DEVICE_ID_INTEL_82443GX_1 0x71a1 ++#define PCI_DEVICE_ID_INTEL_82443GX_2 0x71a2 ++#define PCI_DEVICE_ID_INTEL_82372FB_0 0x7600 ++#define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601 ++#define PCI_DEVICE_ID_INTEL_82372FB_2 0x7602 ++#define PCI_DEVICE_ID_INTEL_82372FB_3 0x7603 ++#define PCI_DEVICE_ID_INTEL_82454GX 0x84c4 ++#define PCI_DEVICE_ID_INTEL_82450GX 0x84c5 ++#define PCI_DEVICE_ID_INTEL_82451NX 0x84ca ++#define PCI_DEVICE_ID_INTEL_82454NX 0x84cb ++#define PCI_DEVICE_ID_INTEL_84460GX 0x84ea ++#define PCI_DEVICE_ID_INTEL_IXP4XX 0x8500 ++#define PCI_DEVICE_ID_INTEL_IXP2400 0x9001 ++#define PCI_DEVICE_ID_INTEL_IXP2800 0x9004 ++#define PCI_DEVICE_ID_INTEL_S21152BB 0xb152 ++ ++#define PCI_VENDOR_ID_COMPUTONE 0x8e0e ++#define PCI_DEVICE_ID_COMPUTONE_IP2EX 0x0291 ++#define PCI_DEVICE_ID_COMPUTONE_PG 0x0302 ++#define PCI_SUBVENDOR_ID_COMPUTONE 0x8e0e ++#define PCI_SUBDEVICE_ID_COMPUTONE_PG4 0x0001 ++#define PCI_SUBDEVICE_ID_COMPUTONE_PG8 0x0002 ++#define PCI_SUBDEVICE_ID_COMPUTONE_PG6 0x0003 ++ ++#define PCI_VENDOR_ID_KTI 0x8e2e ++#define PCI_DEVICE_ID_KTI_ET32P2 0x3000 ++ ++#define PCI_VENDOR_ID_ADAPTEC 0x9004 ++#define PCI_DEVICE_ID_ADAPTEC_7810 0x1078 ++#define PCI_DEVICE_ID_ADAPTEC_7821 0x2178 ++#define PCI_DEVICE_ID_ADAPTEC_38602 0x3860 ++#define PCI_DEVICE_ID_ADAPTEC_7850 0x5078 ++#define PCI_DEVICE_ID_ADAPTEC_7855 0x5578 ++#define PCI_DEVICE_ID_ADAPTEC_5800 0x5800 ++#define PCI_DEVICE_ID_ADAPTEC_3860 0x6038 ++#define PCI_DEVICE_ID_ADAPTEC_1480A 0x6075 ++#define PCI_DEVICE_ID_ADAPTEC_7860 0x6078 ++#define PCI_DEVICE_ID_ADAPTEC_7861 0x6178 ++#define PCI_DEVICE_ID_ADAPTEC_7870 0x7078 ++#define PCI_DEVICE_ID_ADAPTEC_7871 0x7178 ++#define PCI_DEVICE_ID_ADAPTEC_7872 0x7278 ++#define PCI_DEVICE_ID_ADAPTEC_7873 0x7378 ++#define PCI_DEVICE_ID_ADAPTEC_7874 0x7478 ++#define PCI_DEVICE_ID_ADAPTEC_7895 0x7895 ++#define PCI_DEVICE_ID_ADAPTEC_7880 0x8078 ++#define PCI_DEVICE_ID_ADAPTEC_7881 0x8178 ++#define PCI_DEVICE_ID_ADAPTEC_7882 0x8278 ++#define PCI_DEVICE_ID_ADAPTEC_7883 0x8378 ++#define PCI_DEVICE_ID_ADAPTEC_7884 0x8478 ++#define PCI_DEVICE_ID_ADAPTEC_7885 0x8578 ++#define PCI_DEVICE_ID_ADAPTEC_7886 0x8678 ++#define PCI_DEVICE_ID_ADAPTEC_7887 0x8778 ++#define PCI_DEVICE_ID_ADAPTEC_7888 0x8878 ++#define PCI_DEVICE_ID_ADAPTEC_1030 0x8b78 ++ ++#define PCI_VENDOR_ID_ADAPTEC2 0x9005 ++#define PCI_DEVICE_ID_ADAPTEC2_2940U2 0x0010 ++#define PCI_DEVICE_ID_ADAPTEC2_2930U2 0x0011 ++#define PCI_DEVICE_ID_ADAPTEC2_7890B 0x0013 ++#define PCI_DEVICE_ID_ADAPTEC2_7890 0x001f ++#define PCI_DEVICE_ID_ADAPTEC2_3940U2 0x0050 ++#define PCI_DEVICE_ID_ADAPTEC2_3950U2D 0x0051 ++#define PCI_DEVICE_ID_ADAPTEC2_7896 0x005f ++#define PCI_DEVICE_ID_ADAPTEC2_7892A 0x0080 ++#define PCI_DEVICE_ID_ADAPTEC2_7892B 0x0081 ++#define PCI_DEVICE_ID_ADAPTEC2_7892D 0x0083 ++#define PCI_DEVICE_ID_ADAPTEC2_7892P 0x008f ++#define PCI_DEVICE_ID_ADAPTEC2_7899A 0x00c0 ++#define PCI_DEVICE_ID_ADAPTEC2_7899B 0x00c1 ++#define PCI_DEVICE_ID_ADAPTEC2_7899D 0x00c3 ++#define PCI_DEVICE_ID_ADAPTEC2_7899P 0x00cf ++#define PCI_DEVICE_ID_ADAPTEC2_SCAMP 0x0503 ++ ++#define PCI_VENDOR_ID_ATRONICS 0x907f ++#define PCI_DEVICE_ID_ATRONICS_2015 0x2015 ++ ++#define PCI_VENDOR_ID_HOLTEK 0x9412 ++#define PCI_DEVICE_ID_HOLTEK_6565 0x6565 ++ ++#define PCI_VENDOR_ID_NETMOS 0x9710 ++#define PCI_DEVICE_ID_NETMOS_9705 0x9705 ++#define PCI_DEVICE_ID_NETMOS_9715 0x9715 ++#define PCI_DEVICE_ID_NETMOS_9735 0x9735 ++#define PCI_DEVICE_ID_NETMOS_9745 0x9745 ++#define PCI_DEVICE_ID_NETMOS_9755 0x9755 ++#define PCI_DEVICE_ID_NETMOS_9805 0x9805 ++#define PCI_DEVICE_ID_NETMOS_9815 0x9815 ++#define PCI_DEVICE_ID_NETMOS_9835 0x9835 ++#define PCI_DEVICE_ID_NETMOS_9845 0x9845 ++#define PCI_DEVICE_ID_NETMOS_9855 0x9855 ++ ++#define PCI_SUBVENDOR_ID_EXSYS 0xd84d ++#define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014 ++ ++#define PCI_VENDOR_ID_TIGERJET 0xe159 ++#define PCI_DEVICE_ID_TIGERJET_300 0x0001 ++#define PCI_DEVICE_ID_TIGERJET_100 0x0002 ++ ++#define PCI_VENDOR_ID_TTTECH 0x0357 ++#define PCI_DEVICE_ID_TTTECH_MC322 0x000A ++ ++#define PCI_VENDOR_ID_ARK 0xedd8 ++#define PCI_DEVICE_ID_ARK_STING 0xa091 ++#define PCI_DEVICE_ID_ARK_STINGARK 0xa099 ++#define PCI_DEVICE_ID_ARK_2000MT 0xa0a1 |