aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJonas Gorski <jogo@openwrt.org>2015-05-21 19:31:54 +0000
committerJonas Gorski <jogo@openwrt.org>2015-05-21 19:31:54 +0000
commit2bb994b22ce834efde1fbb930ca88b718a598add (patch)
treec462de14511ddd8123c10235e15db3c603b803c1
parent335023a903d78976bd102d086542002b38f74b87 (diff)
downloadmaster-187ad058-2bb994b22ce834efde1fbb930ca88b718a598add.tar.gz
master-187ad058-2bb994b22ce834efde1fbb930ca88b718a598add.tar.bz2
master-187ad058-2bb994b22ce834efde1fbb930ca88b718a598add.zip
brcm63xx: Add Huawei HG655b support
This patch adds support for the Huawei HG655b. Nothing much special in this router, it's just another BCM6368 with a Ralink RT3062 wifi chip and the calibration data embedded in the main flash chip at offset 0x7c0000. There is also configuration data used by the OEM firmware before the cal_data partition, this area is protected by the board_data partition in this patch. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45708 3c298f89-4303-0410-b956-a3cf2f4a3e73
-rw-r--r--target/linux/brcm63xx/base-files/etc/diag.sh3
-rw-r--r--target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom3
-rw-r--r--target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds3
-rw-r--r--target/linux/brcm63xx/base-files/etc/uci-defaults/02_network1
-rwxr-xr-xtarget/linux/brcm63xx/base-files/lib/brcm63xx.sh3
-rw-r--r--target/linux/brcm63xx/dts/hg655b.dts110
-rwxr-xr-xtarget/linux/brcm63xx/image/Makefile2
-rw-r--r--target/linux/brcm63xx/patches-3.18/570-board_HG655b.patch72
-rw-r--r--target/linux/brcm63xx/profiles/huawei.mk10
9 files changed, 207 insertions, 0 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh
index 03d98b9146..c330674fe3 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -89,6 +89,9 @@ set_state() {
hg520)
status_led="HW520:green:net"
;;
+ hg655b)
+ status_led="HW65x:green:power"
+ ;;
p870hw-51a_v2)
status_led="P870HW-51a:green:power"
;;
diff --git a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 9a324eacbd..434748537e 100644
--- a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -34,6 +34,9 @@ case "$FIRMWARE" in
hg556a_c)
rt2x00_eeprom_extract "cal_data" 130560 512
;;
+ hg655b)
+ rt2x00_eeprom_extract "cal_data" 0 512
+ ;;
*)
rt2x00_eeprom_die "board $board is not supported yet"
;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
index 58404a165f..b964bdb229 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
@@ -34,6 +34,9 @@ hg556a_*)
ucidef_set_led_netdev "lan" "LAN" "HW556:red:dsl" "eth0"
ucidef_set_led_usbdev "usb" "USB" "HW556:red:hspa" "1-2"
;;
+hg655b)
+ ucidef_set_led_usbdev "usb" "USB" "HW65x:green:usb" "1-2"
+ ;;
homehub2a)
ucidef_set_led_netdev "lan" "LAN" "HOMEHUB2A:blue:broadband" "eth0.1"
ucidef_set_led_netdev "wlan0" "WIFI" "HOMEHUB2A:green:wireless" "wlan0"
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index 814e1003cd..e5880eb414 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -92,6 +92,7 @@ dsl-274xb-f |\
dsl-275xb-d |\
fast2504n |\
fast2704v2 |\
+hg655b |\
p870hw-51a_v2 |\
vr-3025un |\
vr-3025u)
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 5cb390f061..0eb9a750ca 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -156,6 +156,9 @@ brcm63xx_dt_detect() {
"Huawei EchoLife HG556a (version C)")
board_name="hg556a_c"
;;
+ "Huawei HG655b")
+ board_name="hg655b"
+ ;;
"Inteno VG50")
board_name="vg50"
;;
diff --git a/target/linux/brcm63xx/dts/hg655b.dts b/target/linux/brcm63xx/dts/hg655b.dts
new file mode 100644
index 0000000000..256233d7cf
--- /dev/null
+++ b/target/linux/brcm63xx/dts/hg655b.dts
@@ -0,0 +1,110 @@
+/dts-v1/;
+
+/include/ "bcm6368.dtsi"
+
+/ {
+ model = "Huawei HG655b";
+ compatible = "huawei,hg655b", "brcm,bcm6368";
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ debounce-interval = <60>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 12 1>;
+ linux,code = <0x211>;
+ };
+ wlan {
+ label = "wlan";
+ gpios = <&gpio0 23 1>;
+ linux,code = <0xee>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio1 2 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ dsl_green {
+ label = "HW65x:green:dsl";
+ gpios = <&gpio0 2 1>;
+ };
+ internet_green {
+ label = "HW65x:green:internet";
+ gpios = <&gpio0 5 1>;
+ };
+ lan1_green {
+ label = "HW65x:green:lan1";
+ gpios = <&gpio0 6 1>;
+ };
+ lan2_green {
+ label = "HW65x:green:lan2";
+ gpios = <&gpio0 7 1>;
+ };
+ lan3_green {
+ label = "HW65x:green:lan3";
+ gpios = <&gpio0 8 1>;
+ };
+ lan4_green {
+ label = "HW65x:green:lan4";
+ gpios = <&gpio0 9 1>;
+ };
+ usb_green {
+ label = "HW65x:green:usb";
+ gpios = <&gpio0 14 1>;
+ };
+ power_green {
+ label = "HW65x:green:power";
+ gpios = <&gpio0 22 1>;
+ default-state = "on";
+ };
+ voip_green {
+ label = "HW65x:green:voip";
+ gpios = <&gpio0 25 1>;
+ };
+ wps_green {
+ label = "HW65x:green:wps";
+ gpios = <&gpio0 27 1>;
+ };
+ };
+};
+
+&pflash {
+ status = "ok";
+
+ linux,part-probe = "bcm63xxpart";
+
+ cfe@0 {
+ label = "CFE";
+ reg = <0x000000 0x020000>;
+ };
+
+ linux@20000 {
+ label = "linux";
+ reg = <0x020000 0x770000>;
+ };
+
+ board_data@790000 {
+ label = "board_data";
+ reg = <0x790000 0x030000>;
+ };
+
+ cal_data@7c0000 {
+ label = "cal_data";
+ reg = <0x7c0000 0x020000>;
+ read-only;
+ };
+
+ nvram@7d0000 {
+ label = "nvram";
+ reg = <0x7e0000 0x020000>;
+ };
+};
diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index e98011d56f..0d8ce5338f 100755
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -360,6 +360,8 @@ $(eval $(call ImageDTB,CFEDTB,HG553,HG553,hg553,HW553,6358,--rsa-signature "Echo
$(eval $(call ImageDTB,CFEDTB,HG556a_AB,HG556a_A,hg556a-a,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x10000 --tag-version 8))
$(eval $(call ImageDTB,CFEDTB,HG556a_AB,HG556a_B,hg556a-b,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x20000 --tag-version 8))
$(eval $(call ImageDTB,CFEDTB,HG556a_C,HG556a_C,hg556a-c,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x20000 --tag-version 8))
+# Huawei HG655b
+$(eval $(call ImageDTB,CFEDTB,HG655b,HG655b,hg655b,HW65x,6368,--image-offset 0x20000 --tag-version 7 --pad 4))
# Inteno VG50
$(eval $(call ImageDTB,Dummy,VG50,vg50,vg50,VW6339GU,63268))
# Inventel Livebox 1
diff --git a/target/linux/brcm63xx/patches-3.18/570-board_HG655b.patch b/target/linux/brcm63xx/patches-3.18/570-board_HG655b.patch
new file mode 100644
index 0000000000..903068a842
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/570-board_HG655b.patch
@@ -0,0 +1,72 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1928,6 +1928,53 @@
+
+ .spis = DGND3700v1_3800B_spi_devices,
+ .num_spis = ARRAY_SIZE(DGND3700v1_3800B_spi_devices),
++};
++
++static struct board_info __initdata board_HG655b = {
++ .name = "HW65x",
++ .expected_cpu_id = 0x6368,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_caldata = 1,
++ .caldata = {
++ {
++ .vendor = PCI_VENDOR_ID_RALINK,
++ .caldata_offset = 0x7c0000,
++ .slot = 1,
++ .eeprom = "rt2x00.eeprom",
++ },
++ },
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "port1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "port2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "port3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "port4",
++ },
++ },
++ },
+ };
+
+ static struct sprom_fixup __initdata vr3025u_fixups[] = {
+@@ -2380,6 +2427,7 @@
+ &board_96368mvwg,
+ &board_96368mvngr,
+ &board_DGND3700v1_3800B,
++ &board_HG655b,
+ &board_P870HW51A_V2,
+ &board_VR3025u,
+ &board_VR3025un,
+@@ -2483,6 +2531,7 @@
+ { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+ { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+ { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
++ { .compatible = "huawei,hg655b", .data = &board_HG655b, },
+ { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
+ { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
+ #endif
diff --git a/target/linux/brcm63xx/profiles/huawei.mk b/target/linux/brcm63xx/profiles/huawei.mk
index 594389ec0e..a6764b73e3 100644
--- a/target/linux/brcm63xx/profiles/huawei.mk
+++ b/target/linux/brcm63xx/profiles/huawei.mk
@@ -43,3 +43,13 @@ define Profile/HG556a_C/Description
Package set optimized for Huawei HG556a version C (Ralink).
endef
$(eval $(call Profile,HG556a_C))
+
+define Profile/HG655b
+ NAME:=Huawei HG655b
+ PACKAGES:=kmod-rt2800-pci wpad-mini \
+ kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev
+endef
+define Profile/HG655b/Description
+ Package set optimized for Huawei HG655b, HG655d.
+endef
+$(eval $(call Profile,HG655b))