1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
|
#define BLE_DFU_SERVICE_UUID 0x1530 /**< The UUID of the DFU Service. */
#define BLE_DFU_PKT_CHAR_UUID 0x1532 /**< The UUID of the DFU Packet Characteristic. */
#define BLE_DFU_CTRL_PT_UUID 0x1531 /**< The UUID of the DFU Control Point. */
#define BLE_DFU_STATUS_REP_UUID 0x1533 /**< The UUID of the DFU Status Report Characteristic. */
#define BLE_DFU_REV_CHAR_UUID 0x1534 /**< The UUID of the DFU Revision Characteristic. */
typedef enum
{
BLE_DFU_RESP_VAL_SUCCESS = 1, /**< Success.*/
BLE_DFU_RESP_VAL_INVALID_STATE, /**< Invalid state.*/
BLE_DFU_RESP_VAL_NOT_SUPPORTED, /**< Operation not supported.*/
BLE_DFU_RESP_VAL_DATA_SIZE, /**< Data size exceeds limit.*/
BLE_DFU_RESP_VAL_CRC_ERROR, /**< CRC Error.*/
BLE_DFU_RESP_VAL_OPER_FAILED /**< Operation failed.*/
} ble_dfu_resp_val_t;
enum
{
OP_CODE_START_DFU = 1, /**< Value of the Op code field for 'Start DFU' command.*/
OP_CODE_RECEIVE_INIT = 2, /**< Value of the Op code field for 'Initialize DFU parameters' command.*/
OP_CODE_RECEIVE_FW = 3, /**< Value of the Op code field for 'Receive firmware image' command.*/
OP_CODE_VALIDATE = 4, /**< Value of the Op code field for 'Validate firmware' command.*/
OP_CODE_ACTIVATE_N_RESET = 5, /**< Value of the Op code field for 'Activate & Reset' command.*/
OP_CODE_SYS_RESET = 6, /**< Value of the Op code field for 'Reset System' command.*/
OP_CODE_IMAGE_SIZE_REQ = 7, /**< Value of the Op code field for 'Report received image size' command.*/
OP_CODE_PKT_RCPT_NOTIF_REQ = 8, /**< Value of the Op code field for 'Request packet receipt notification.*/
OP_CODE_RESPONSE = 16, /**< Value of the Op code field for 'Response.*/
OP_CODE_PKT_RCPT_NOTIF = 17 /**< Value of the Op code field for 'Packets Receipt Notification'.*/
};
#define DFU_UPDATE_SD 0x01 /**< Bit field indicating update of SoftDevice is ongoing. */
#define DFU_UPDATE_BL 0x02 /**< Bit field indicating update of bootloader is ongoing. */
#define DFU_UPDATE_APP 0x04 /**< Bit field indicating update of application is ongoing. */
#define DFU_INIT_RX 0x00 /**< Op Code identifies for receiving init packet. */
#define DFU_INIT_COMPLETE 0x01 /**< Op Code identifies for transmission complete of init packet. */
|
