diff options
Diffstat (limited to 'bootloader/bsp/bracelet.h')
| -rw-r--r-- | bootloader/bsp/bracelet.h | 101 |
1 files changed, 0 insertions, 101 deletions
diff --git a/bootloader/bsp/bracelet.h b/bootloader/bsp/bracelet.h deleted file mode 100644 index 1e41865..0000000 --- a/bootloader/bsp/bracelet.h +++ /dev/null @@ -1,101 +0,0 @@ -/* Copyright (c) 2014 Nordic Semiconductor. All Rights Reserved.
- *
- * The information contained herein is property of Nordic Semiconductor ASA.
- * Terms and conditions of usage are described in detail in NORDIC
- * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
- *
- * Licensees are granted free, non-transferable use of the information. NO
- * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
- * the file.
- *
- */
-#ifndef BLE400_H
-#define BLE400_H
-
-// LEDs definitions for BLE400
-#define LEDS_NUMBER 1
-
-#define LED_START 22
-#define LED_0 22
-#define LED_STOP 22
-
-#define LEDS_LIST { LED_0 }
-
-#define BSP_LED_0 LED_0
-
-#define BSP_LED_0_MASK (1<<BSP_LED_0)
-
-#define LEDS_MASK (BSP_LED_0_MASK)
-
-/* all LEDs are lit when GPIO is low */
-#define LEDS_INV_MASK LEDS_MASK
-
-#define BUTTONS_NUMBER 2
-
-#define BUTTON_START 3
-#define BUTTON_1 3
-#define BUTTON_2 4
-#define BUTTON_STOP 4
-#define BUTTON_PULL NRF_GPIO_PIN_NOPULL~
-
-#define BUTTONS_LIST { BUTTON_1, BUTTON_2 }
-
-#define BSP_BUTTON_0 BUTTON_1
-#define BSP_BUTTON_1 BUTTON_2
-
-#define BSP_BUTTON_0_MASK (1<<BSP_BUTTON_0)
-#define BSP_BUTTON_1_MASK (1<<BSP_BUTTON_1)
-
-#define BUTTONS_MASK (BSP_BUTTON_0_MASK|BSP_BUTTON_1_MASK)
-
-#define RX_PIN_NUMBER 18
-#define TX_PIN_NUMBER 19
-//#define CTS_PIN_NUMBER 10
-//#define RTS_PIN_NUMBER 8
-#define HWFC false
-
-#if 0
-#define SPIS_MISO_PIN 28 // SPI MISO signal.
-#define SPIS_CSN_PIN 12 // SPI CSN signal.
-#define SPIS_MOSI_PIN 25 // SPI MOSI signal.
-#define SPIS_SCK_PIN 29 // SPI SCK signal.
-
-#define SPIM0_SCK_PIN 4 /**< SPI clock GPIO pin number. */
-#define SPIM0_MOSI_PIN 1 /**< SPI Master Out Slave In GPIO pin number. */
-#define SPIM0_MISO_PIN 3 /**< SPI Master In Slave Out GPIO pin number. */
-#define SPIM0_SS_PIN 2 /**< SPI Slave Select GPIO pin number. */
-
-#define SPIM1_SCK_PIN 15 /**< SPI clock GPIO pin number. */
-#define SPIM1_MOSI_PIN 12 /**< SPI Master Out Slave In GPIO pin number. */
-#define SPIM1_MISO_PIN 14 /**< SPI Master In Slave Out GPIO pin number. */
-#define SPIM1_SS_PIN 13 /**< SPI Slave Select GPIO pin number. */
-
-// serialization APPLICATION board
-#define SER_APP_RX_PIN 12 // UART RX pin number.
-#define SER_APP_TX_PIN 13 // UART TX pin number.
-#define SER_APP_CTS_PIN 15 // UART Clear To Send pin number.
-#define SER_APP_RTS_PIN 14 // UART Request To Send pin number.
-
-#define SER_APP_SPIM0_SCK_PIN 29 // SPI clock GPIO pin number.
-#define SER_APP_SPIM0_MOSI_PIN 25 // SPI Master Out Slave In GPIO pin number
-#define SER_APP_SPIM0_MISO_PIN 28 // SPI Master In Slave Out GPIO pin number
-#define SER_APP_SPIM0_SS_PIN 12 // SPI Slave Select GPIO pin number
-#define SER_APP_SPIM0_RDY_PIN 14 // SPI READY GPIO pin number
-#define SER_APP_SPIM0_REQ_PIN 13 // SPI REQUEST GPIO pin number
-
-// serialization CONNECTIVITY board
-#define SER_CON_RX_PIN 13 // UART RX pin number.
-#define SER_CON_TX_PIN 12 // UART TX pin number.
-#define SER_CON_CTS_PIN 14 // UART Clear To Send pin number. Not used if HWFC is set to false.
-#define SER_CON_RTS_PIN 15 // UART Request To Send pin number. Not used if HWFC is set to false.
-
-
-#define SER_CON_SPIS_SCK_PIN 29 // SPI SCK signal.
-#define SER_CON_SPIS_MOSI_PIN 25 // SPI MOSI signal.
-#define SER_CON_SPIS_MISO_PIN 28 // SPI MISO signal.
-#define SER_CON_SPIS_CSN_PIN 12 // SPI CSN signal.
-#define SER_CON_SPIS_RDY_PIN 14 // SPI READY GPIO pin number.
-#define SER_CON_SPIS_REQ_PIN 13 // SPI REQUEST GPIO pin number.
-#endif
-
-#endif // BLE400_H
|