diff options
Diffstat (limited to 'bootloader/bsp/ble400.h')
| -rw-r--r-- | bootloader/bsp/ble400.h | 112 |
1 files changed, 112 insertions, 0 deletions
diff --git a/bootloader/bsp/ble400.h b/bootloader/bsp/ble400.h new file mode 100644 index 0000000..4c8866b --- /dev/null +++ b/bootloader/bsp/ble400.h @@ -0,0 +1,112 @@ +/* Copyright (c) 2014 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+#ifndef BLE400_H
+#define BLE400_H
+
+// LEDs definitions for BLE400
+#define LEDS_NUMBER 4
+
+#define LED_START 18
+#define LED_0 18
+#define LED_1 19
+#define LED_2 20
+#define LED_3 21
+#define LED_4 22
+#define LED_STOP 22
+
+#define LEDS_LIST { LED_0, LED_1, LED_2, LED_3, LED_4 }
+
+#define BSP_LED_0 LED_0
+#define BSP_LED_1 LED_1
+#define BSP_LED_2 LED_2
+#define BSP_LED_3 LED_3
+#define BSP_LED_4 LED_4
+
+#define BSP_LED_0_MASK (1<<BSP_LED_0)
+#define BSP_LED_1_MASK (1<<BSP_LED_1)
+#define BSP_LED_2_MASK (1<<BSP_LED_2)
+#define BSP_LED_3_MASK (1<<BSP_LED_3)
+#define BSP_LED_4_MASK (1<<BSP_LED_4)
+
+#define LEDS_MASK (BSP_LED_0_MASK | BSP_LED_1_MASK | BSP_LED_2_MASK | BSP_LED_3_MASK | BSP_LED_4_MASK )
+/* all LEDs are lit when GPIO is low */
+#define LEDS_INV_MASK LEDS_MASK
+
+#define BUTTONS_NUMBER 2
+
+#define BUTTON_START 16
+#define BUTTON_1 16
+#define BUTTON_2 17
+#define BUTTON_STOP 17
+#define BUTTON_PULL NRF_GPIO_PIN_PULLUP
+
+#define BUTTONS_LIST { BUTTON_1, BUTTON_2 }
+
+#define BSP_BUTTON_0 BUTTON_1
+#define BSP_BUTTON_1 BUTTON_2
+
+#define BSP_BUTTON_0_MASK (1<<BSP_BUTTON_0)
+#define BSP_BUTTON_1_MASK (1<<BSP_BUTTON_1)
+
+#define BUTTONS_MASK (BSP_BUTTON_0_MASK|BSP_BUTTON_1_MASK)
+
+#define RX_PIN_NUMBER 11
+#define TX_PIN_NUMBER 9
+#define CTS_PIN_NUMBER 10
+#define RTS_PIN_NUMBER 8
+#define HWFC true
+
+#if 0
+#define SPIS_MISO_PIN 28 // SPI MISO signal.
+#define SPIS_CSN_PIN 12 // SPI CSN signal.
+#define SPIS_MOSI_PIN 25 // SPI MOSI signal.
+#define SPIS_SCK_PIN 29 // SPI SCK signal.
+
+#define SPIM0_SCK_PIN 4 /**< SPI clock GPIO pin number. */
+#define SPIM0_MOSI_PIN 1 /**< SPI Master Out Slave In GPIO pin number. */
+#define SPIM0_MISO_PIN 3 /**< SPI Master In Slave Out GPIO pin number. */
+#define SPIM0_SS_PIN 2 /**< SPI Slave Select GPIO pin number. */
+
+#define SPIM1_SCK_PIN 15 /**< SPI clock GPIO pin number. */
+#define SPIM1_MOSI_PIN 12 /**< SPI Master Out Slave In GPIO pin number. */
+#define SPIM1_MISO_PIN 14 /**< SPI Master In Slave Out GPIO pin number. */
+#define SPIM1_SS_PIN 13 /**< SPI Slave Select GPIO pin number. */
+
+// serialization APPLICATION board
+#define SER_APP_RX_PIN 12 // UART RX pin number.
+#define SER_APP_TX_PIN 13 // UART TX pin number.
+#define SER_APP_CTS_PIN 15 // UART Clear To Send pin number.
+#define SER_APP_RTS_PIN 14 // UART Request To Send pin number.
+
+#define SER_APP_SPIM0_SCK_PIN 29 // SPI clock GPIO pin number.
+#define SER_APP_SPIM0_MOSI_PIN 25 // SPI Master Out Slave In GPIO pin number
+#define SER_APP_SPIM0_MISO_PIN 28 // SPI Master In Slave Out GPIO pin number
+#define SER_APP_SPIM0_SS_PIN 12 // SPI Slave Select GPIO pin number
+#define SER_APP_SPIM0_RDY_PIN 14 // SPI READY GPIO pin number
+#define SER_APP_SPIM0_REQ_PIN 13 // SPI REQUEST GPIO pin number
+
+// serialization CONNECTIVITY board
+#define SER_CON_RX_PIN 13 // UART RX pin number.
+#define SER_CON_TX_PIN 12 // UART TX pin number.
+#define SER_CON_CTS_PIN 14 // UART Clear To Send pin number. Not used if HWFC is set to false.
+#define SER_CON_RTS_PIN 15 // UART Request To Send pin number. Not used if HWFC is set to false.
+
+
+#define SER_CON_SPIS_SCK_PIN 29 // SPI SCK signal.
+#define SER_CON_SPIS_MOSI_PIN 25 // SPI MOSI signal.
+#define SER_CON_SPIS_MISO_PIN 28 // SPI MISO signal.
+#define SER_CON_SPIS_CSN_PIN 12 // SPI CSN signal.
+#define SER_CON_SPIS_RDY_PIN 14 // SPI READY GPIO pin number.
+#define SER_CON_SPIS_REQ_PIN 13 // SPI REQUEST GPIO pin number.
+#endif
+
+#endif // BLE400_H
|