diff options
Diffstat (limited to 'conf/configure.in.in')
| -rw-r--r-- | conf/configure.in.in | 360 |
1 files changed, 360 insertions, 0 deletions
diff --git a/conf/configure.in.in b/conf/configure.in.in new file mode 100644 index 0000000..a91ae5f --- /dev/null +++ b/conf/configure.in.in @@ -0,0 +1,360 @@ +AC_REVISION($Revision$)dnl revision of this configure.in script + +AC_INIT(Makefile.am) +AC_CONFIG_AUX_DIR(conf) +AC_AIX +AC_CANONICAL_SYSTEM +AM_CONFIG_HEADER(include/config.h) +AM_INIT_AUTOMAKE(plptools, 0.11) +AM_PROG_LIBTOOL +PLP_SET_LIBVERSION + +dnl Enable Maintainer stuff +AM_MAINTAINER_MODE + +dnl checks for programs +AC_PROG_MAKE_SET +PLP_CHECK_COMPILERS +AC_PROG_AWK +AC_PATH_PROG(SED,sed) + +dnl NLS support +ALL_LINGUAS="de sv" +AM_GNU_GETTEXT +dnl Additional glibc-intl checks +PLP_CHECK_INTL + +dnl This is stupid for two resaons: +dnl +dnl 1. It doesn't save and restore CFLAGS if it's _not_ Sun's cc +dnl (these have been set already in AC_CHECK_COMPILERS +dnl 2. It assumes cc installed at a fixed path which may not be true +dnl pkgadd -r can install anywhere. +dnl +dnl A correct version should check by using cc's _behavior_, not path +dnl and save and restore CFLAGS, if it's not Sun's cc. +dnl +dnl -> Commented out for now because i have gcc on Solaris, no Sun cc. +dnl If somebody complains, (s)he should send me some cc output and i +dnl can add a correct check to AC_CHECK_COMPILERS (where it belongs). +dnl Apart from that, Sun's compiler is crap anyway: It doesn't compile +dnl valid c++ code correctly. +dnl +dnl -Fritz +dnl +dnl test "$GCC" = yes && CFLAGS="-O2 -Wall" +dnl AC_PATH_PROG(CC_PATH, $CC) +dnl test "$CC_PATH" = /opt/SUNWspro/bin/cc && CFLAGS="-xO2 -v" + +dnl checking for aix +AC_MSG_CHECKING(for AIX) +if test "`uname -s 2>/dev/null`" = AIX ; then + AC_MSG_RESULT(yes) + AC_CHECK_LIB(bsd, hostname) + EXTRA_OBJS=mount_aix.o +else + AC_MSG_RESULT(no) +fi +AC_SUBST(EXTRA_OBJS) + +dnl checks for libraries + +dnl readline and history for plpftp +ac_enable_readline=yes +AM_CONDITIONAL(HAVE_LIBREADLINE, false) +AM_CONDITIONAL(ADD_LIBCURSES, false) +AC_ARG_ENABLE(readline, + [ --disable-readline disable libreadline support [no]], + if test "$enableval" = "no" ; then + AC_MSG_RESULT([support for libreadline disabled]) + ac_enable_readline=no + fi +) +if test "x$ac_enable_readline" = "xyes" ; then + PLP_CHECK_READLINE +fi + +ac_enable_history=yes +ac_cv_libhistory= +AC_ARG_ENABLE(history, + [ --disable-history disable libhistory support [no]], + if test "$enableval" = "no" ; then + AC_MSG_RESULT([support for libhistory disabled]) + ac_enable_history=no + fi +) +if test "x$ac_enable_history" = "xyes" ; then + AC_CHECK_LIB(history, add_history, + [ + AC_DEFINE_UNQUOTED(HAVE_LIBHISTORY,1, + [Define this, if you have libhistory]) + ac_cv_libhistory=-lhistory + ]) +fi +LIBHISTORY=${ac_cv_libhistory} +AC_SUBST(LIBHISTORY) + +ac_enable_newt=yes +ac_cv_libnewt= +AC_ARG_ENABLE(newt, + [ --disable-newt disable libnewt support [no]], + if test "$enableval" = "no" ; then + AC_MSG_RESULT([support for libnewt disabled]) + ac_enable_newt=no + fi +) +if test "x$ac_enable_newt" = "xyes" ; then + AC_CHECK_LIB(newt, newtInit, + [ + AC_DEFINE_UNQUOTED(HAVE_LIBNEWT,1, + [Define this, if you have libnewt]) + ac_cv_libnewt=-lnewt + ]) +fi +LIBNEWT=${ac_cv_libnewt} +AC_SUBST(LIBNEWT) + +dnl these three are for solaris +AC_CHECK_LIB(socket, socket) +AC_CHECK_LIB(nsl, gethostbyname) +ac_save_LDFLAGS=$LDFLAGS; LDFLAGS="-L/usr/ucblib -R/usr/ucblib $LDFLAGS" +AC_CHECK_LIB(rpcsoc, svcudp_create,,LDFLAGS=$ac_save_LDFLAGS) + +dnl checks for mount table - if desired +ac_enable_mnttab=yes +AC_ARG_ENABLE(mnttab, + [ --disable-mnttab disable mnttab writing [no]], + if test "$enableval" = "no" ; then + AC_MSG_RESULT([support for mnttab disabled]) + ac_enable_mnttab=no + fi +) +if test "x$ac_enable_mnttab" = "xyes" ; then + AC_MSG_CHECKING(for mount table) + PLP_FIND_FILE(/etc/mnttab /etc/mtab, MTAB) + AC_MSG_RESULT($MTAB) + if test "$MTAB" = "NO" ; then + AC_DEFINE_UNQUOTED(DONT_UPDATE_MTAB,1, + [Define this this if you want to prevent plpnfsd from updating mtab]) + else + AC_DEFINE_UNQUOTED(MTAB_PATH,"$MTAB", + [Define this to your mtab's path]) + ac_cv_mtab_tmp="${MTAB}~" + case "$target_alias" in + *linux*) + ;; + *) + ac_cv_mtab_tmp="${MTAB}.plpnfsd" + ;; + esac + AC_DEFINE_UNQUOTED(MTAB_TMP,"${ac_cv_mtab_tmp}", + [Define this to your temporary mtab's path]) + fi +fi + +dnl Check, if bot time.h and sys/time.h may be included +AC_HEADER_TIME + +dnl Check, if compiler knows about bool +AC_CHECK_BOOL + +dnl Type of sighandlers +AC_TYPE_SIGNAL + +dnl checks for header files +AC_CHECK_HEADERS( + sys/time.h sys/ioctl.h sys/errno.h sys/ttold.h stdlib.h \ + sys/int_types.h stdint.h +) + +PLP_HELP_MSG([Debugging (developer only!):]) +AC_CHECK_CCMALLOC + +dnl special options for customization +PLP_HELP_MSG([Options for overriding builtin defaults:]) + +AC_ARG_WITH(serial, + [ --with-serial=DEV override default serial line], + [ DDEV="$withval" + AC_MSG_RESULT(Overriding serial line: $DDEV) + ], + [ AC_MSG_CHECKING(for default serial line) + PLP_FIND_CDEV(/dev/psion /dev/tty0p0 /dev/tty00 /dev/ttyS0 /dev/term/a /dev/ttyfa /dev/ttya /dev/tty0 /dev/ttyf1 /dev/cuaa1, DDEV) + AC_MSG_RESULT($DDEV) + test "$DDEV" = "NO" && AC_MSG_ERROR(NO serial lines. Use --with-serial.) + ] +) +AC_DEFINE_UNQUOTED(DDEV,"$DDEV",[Define this to your serial device node]) +AC_SUBST(DDEV) + +AC_ARG_WITH(speed, + [ --with-speed=SPEED override default serial speed [auto]], + [ if "$withval" = "auto" ; then + DSNAME=auto + DSPEED=-1 + else + DSPEED="$withval" + DSNAME="$withval" + fi + AC_MSG_RESULT(Overriding serial speed: $DSNAME) ], + [ DSPEED=-1 + DSNAME=auto + AC_MSG_RESULT(Using default serial speed: auto) + ] +) +AC_DEFINE_UNQUOTED(DSPEED,$DSPEED,[Define this to your serial device speed]) +AC_DEFINE_UNQUOTED(DSNAME,$DSNAME, + [Define this to your serial device speed alias]) +AC_SUBST(DSPEED) +AC_SUBST(DSNAME) + +AC_ARG_WITH(port, + [ --with-port=PORT override default port [7501]], + [ DPORT="$withval" + AC_MSG_RESULT(Overriding port: $DPORT) ], + [ DPORT=7501 + AC_MSG_RESULT(Using default port: $DPORT) + ] +) +AC_DEFINE_UNQUOTED(DPORT,$DPORT, + [Define this to the TCP port ncpd should listen on]) +AC_SUBST(DPORT) + +AC_ARG_WITH(drive, + [ --with-drive=DRIVE override default Psion drive [AUTO]], + [ DDRIVE="$withval" + AC_MSG_RESULT(Overriding drive: $DDRIVE) ], + [ DDRIVE='AUTO' + AC_MSG_RESULT(Using default Psion drive: $DDRIVE) + ] +) +AC_DEFINE_UNQUOTED(DDRIVE,"$DDRIVE", + [Define this to your default drive on your Psion]) + +AC_ARG_WITH(basedir, + [ --with-basedir=DIR override default Psion directory [\\\\]], + [ DBASEDIR="$withval" + AC_MSG_RESULT(Overriding directory: $DBASEDIR) ], + [ DBASEDIR='\\' + AC_MSG_RESULT(Using default Psion directory: $DBASEDIR) + ] +) +AC_DEFINE_UNQUOTED(DBASEDIR,"$DBASEDIR", + [Define this to your default directory on your Psion]) + +AC_ARG_WITH(mountdir, + [ --with-mountdir=DIR override default mount point [/mnt/psion]], + [ DMOUNTPOINT="$withval" + AC_MSG_RESULT(Overriding mount point: $DMOUNTPOINT) ], + [ DMOUNTPOINT="/mnt/psion" + AC_MSG_RESULT(Using default mount point: $DMOUNTPOINT) + ] +) +AC_DEFINE_UNQUOTED(DMOUNTPOINT,"$DMOUNTPOINT", + [Define this to your default mountpoint for plpnfsd]) +AC_SUBST(DMOUNTPOINT) +test "x$prefix" = xNONE && prefix="$ac_default_prefix" +eval PKGDATA="${datadir}/${PACKAGE}" +AC_DEFINE_UNQUOTED(PKGDATA,"$PKGDATA",[This defines the dir for support files]) +AC_SUBST(PKGDATA) + +AC_ARG_WITH(initdir, + [ --with-initdir=DIR override default init dir [/etc/rc.d/init.d]], + [ initdir="$withval" + AC_MSG_RESULT(Overriding initdir: $initdir) ], + [ initdir="/etc/rc.d/init.d" + AC_MSG_RESULT(Using default init dir: $initdir) + ] +) +AC_SUBST(initdir) + +dnl KDE stuff +PLP_HELP_MSG([Options for activating sub packages:]) +ac_enable_kde=no +AM_CONDITIONAL(BUILD_KDE, false) +AC_ARG_ENABLE(kde, + [ --enable-kde build KDE stuff [no]], + if test "$enableval" = "yes" ; then + AC_MSG_RESULT([Will build KDE stuff]) + ac_enable_kde=yes + fi +) +PLP_HELP_MSG([Options, only needed when building KDE stuff:]) +if test "x$ac_enable_kde" = "xyes" ; then + AC_PATH_KDE + if test -n "${kde_cv_path_kde_config}" ; then + kde_prefix=`${kde_cv_path_kde_config} --prefix` + kde_exec_prefix=`${kde_cv_path_kde_config} --prefix` + else + if test "${prefix}" != "NONE" ; then + kde_prefix=${prefix} + else + kde_prefix=$ac_default_prefix + fi + if test "${exec_prefix}" != "NONE" ; then + kde_exec_prefix=${exec_prefix} + else + kde_exec_prefix=${kde_prefix} + fi + fi + AC_ARG_WITH(kdedir, + [ --with-kdedir=DIR specify KDE directory [${prefix:-${ac_default_prefix}}]], + [ + kde_prefix=${withval} + kde_exec_prefix=${withval} + ] + ) + AC_MSG_RESULT(KDE stuff will be installed below $kde_prefix) + AC_SUBST(kde_prefix) + AC_SUBST(kde_exec_prefix) + AC_CHECK_KDEMAXPATHLEN + KDE_CHECK_FINAL + AM_KDE_WITH_NLS + KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_RPATH)" + AC_SUBST(KDE_PLUGIN) + AM_CONDITIONAL(BUILD_KDE, true) +fi + +AC_OUTPUT( + Makefile + intl/Makefile + po/Makefile.in + po/Makefile + lib/Makefile + ncpd/Makefile + plpftp/Makefile + plpnfsd/Makefile + kde2/Makefile + kde2/kioslave/Makefile + kde2/plugins/Makefile + kde2/kpsion/Makefile + kde2/klipsi/Makefile + kde2/po/Makefile + kde2/po/de/Makefile + kde2/mime/Makefile + kde2/mime/icons/Makefile + kde2/doc/Makefile + kde2/doc/en/Makefile + kde2/doc/de/Makefile + kde2/doc/kioslave/Makefile + kde2/doc/kioslave/de/Makefile + kde2/doc/kioslave/en/Makefile + plpbackup/Makefile + plpprint/Makefile + plpprint/prolog.ps + sisinstall/Makefile + doc/Makefile + doc/api/Makefile + etc/psion + etc/psion.SuSE + etc/psion.SuSE8 + etc/plptools.spec + doc/ncpd.man + doc/plpnfsd.man + doc/plpftp.man + doc/sisinstall.man + doc/plpprintd.man + doc/plpbackup.man + debian/kpsion.1.in + debian/klipsi.1.in +) |