aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorReuben Thomas <rrt@sc3d.org>2007-07-17 23:44:56 +0000
committerReuben Thomas <rrt@sc3d.org>2007-07-17 23:44:56 +0000
commitf10b0d23e164e4d471805cc30367a6cd6414b0b6 (patch)
tree0d10412eddcf3c16c92994ecab0e814f0af36f5d
parentc0623287b8a5409628fae2721a568eba98d67f55 (diff)
downloadplptools-f10b0d23e164e4d471805cc30367a6cd6414b0b6.tar.gz
plptools-f10b0d23e164e4d471805cc30367a6cd6414b0b6.tar.bz2
plptools-f10b0d23e164e4d471805cc30367a6cd6414b0b6.zip
Instead of stock INSTALL, use the specific instructions from README.
-rw-r--r--INSTALL297
1 files changed, 115 insertions, 182 deletions
diff --git a/INSTALL b/INSTALL
index cb328dd..be51b88 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,183 +1,116 @@
Basic Installation
-==================
-
- These are generic installation instructions.
- >>>> For package-specific stuff, look into README. <<<<
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
-
- The file `configure.in' is used to create `configure' by a program
-called `autoconf'. You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
-
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package.
-
- 4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. You can give `configure'
-initial values for variables by setting them in the environment. Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
- CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-
-Or on systems that have the `env' program, you can do it like this:
- env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory. After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
-
-Installation Names
-==================
-
- By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on. Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
- CPU-COMPANY-SYSTEM
-
-See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
-
- If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Operation Controls
-==================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--cache-file=FILE'
- Use and save the results of the tests in FILE instead of
- `./config.cache'. Set FILE to `/dev/null' to disable caching, for
- debugging `configure'.
-
-`--help'
- Print a summary of the options to `configure', and exit.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`--version'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`configure' also accepts some other, not widely useful, options.
+ $Id$
+
+ How to install:
+
+ ./configure
+ make
+ make install
+
+ In addition to the usual options, configure understands the following
+ stuff for customization to your environment:
+
+ --enable-debug
+
+ Adds -g to CFLAGS, so you will get debugging-versions of
+ the programs and libplp
+
+ --with-serial=/dev/sometty
+
+ overrides the default serial device for ncpd. Without this
+ option, configure tries to automagically find a serial device.
+
+ --with-speed=baudrate
+
+ overrides the default serial speed of 115200 baud.
+
+ --with-port=portnum
+
+ overrides the default port number, where ncpd listens
+ and plpftp resp. plpnfsd connects to.
+
+ --with-drive=drivespec
+
+ overrides the default drive for plpftp. The default "AUTO"
+ triggers a drive-scan on the psion and sets the drive to
+ the first drive found. If you don't want that, specify
+ C: for example.
+
+ --with-basedir=dirspec
+
+ overrides the default directory for plpftp. The default is \\
+ which means the root-dir. Note: directory-separators have to
+ be specified as C-like backslashes and if you consider shell's
+ escape-mechanism, these in turn have to be escaped with backslashes ;-)
+
+ --disable-mnttab
+
+ By default, configure checks for existence of /etc/mtab or /etc/mnttab
+ and configures plpnfsd to update that file every time when it
+ mounts or unmounts the psion. If plpnfsd crashes or is killed during
+ that update, /etc/mtab resp. /etc/mnttab can be corrupted. Since
+ this file on some operating systems is vital for functionality
+ of mount/umount, this update can be disabled with the above option.
+
+ --enable-kde
+
+ Enable build of KDE related stuff. This needs installed
+ KDE (>= 2) headers/development-libraries as well as QT (>= 2.2.4)
+ headers/development-libraries.
+
+ --with-kdedir=/path/to/your/kde
+
+ Specify the KDE directory. I got several reports from SuSE users,
+ who have KDE1 and KDE2 in those weird pathes /opt/kde and /opt/kde2
+ installed and the automatic detection does get confused by that.
+ So be shure to use this switch. RedHat users can safely use
+ --prefix=/usr instead.
+
+ --with-qt-dir=/path/to/your/qtdir
+
+ or
+
+ --with-qt-includes=/path/to/your/qt-headers
+ --with-qt-libraries=/path/to/your/qt-lib
+
+ Same as above. Use these, when automatic detection fails.
+
+ --with-kdeversion=X
+
+ Override the KDE version detection manually. Only needed in
+ special cases where more than one KDE version is installed and
+ autodetection fails. X can be either 2 or 3.
+
+ By default, the install-prefix is /usr/local, so you probably
+ should add /usr/local/lib to your /etc/ld.so.conf and then run
+ ldconfig after installation. Another option is to run configure
+ with the option --prefix=/usr
+
+ NOTE:
+ Although the subdirectory for KDE stuff is named "kde2", this is only
+ for historical reason. The package builds on KDE 3 as well as KDE 2.
+ It tries to figure out the version of KDE automatically. People who have
+ both versions installed should carefully watch the output of configure.
+ The KDEDIR as well as KDE's version can be overridden via commandline
+ (see above).
+
+ KDE STUFF
+
+ The KDE KIOslave library adds support for a new protocol named
+ "psion:". So in konqueror, just open psion:/ to see your Psion's
+ drives. You now can copy, move, rename, open ... all those
+ operations you are used to. Any KDE application which supports
+ URLs should be able to deal with the files on the Psion.
+ If you have the toplevel directory displayed in Konqueror, the
+ Property dialog for the drives (right-click on an icon of a
+ drive, Properties) comes up in a modified fashion which allows
+ you to see the drive usage as well as triggering backup, restore
+ and format. The toplevel Properties (right-click on the view's
+ background, Properties) brings up a Dialog which displays machine-
+ related information. (Same info like the "machinfo" command in
+ plpftp. Currently there are no mime-types for Psion-Files but i
+ soon will add these. Backup, restore and format is done by a separate
+ standalone program "KPsion".
+
+Have fun.
+ -Fritz