diff options
Diffstat (limited to 'libopencm3/scripts/data/lpc43xx/adc.yaml')
| -rw-r--r-- | libopencm3/scripts/data/lpc43xx/adc.yaml | 607 |
1 files changed, 607 insertions, 0 deletions
diff --git a/libopencm3/scripts/data/lpc43xx/adc.yaml b/libopencm3/scripts/data/lpc43xx/adc.yaml new file mode 100644 index 0000000..9256e2a --- /dev/null +++ b/libopencm3/scripts/data/lpc43xx/adc.yaml @@ -0,0 +1,607 @@ +!!omap +- ADC0_CR: + fields: !!omap + - SEL: + access: rw + description: Selects which of the ADCn_[7:0] inputs are to be sampled and + converted + lsb: 0 + reset_value: '0' + width: 8 + - CLKDIV: + access: rw + description: The ADC clock is divided by the CLKDIV value plus one to produce + the clock for the A/D converter + lsb: 8 + reset_value: '0' + width: 8 + - BURST: + access: rw + description: Controls Burst mode + lsb: 16 + reset_value: '0' + width: 1 + - CLKS: + access: rw + description: This field selects the number of clocks used for each conversion + in Burst mode and the number of bits of accuracy of the result in the LS + bits of ADDR, between 11 clocks (10 bits) and 4 clocks (3 bits). + lsb: 17 + reset_value: '0' + width: 3 + - PDN: + access: rw + description: Power mode + lsb: 21 + reset_value: '0' + width: 1 + - START: + access: rw + description: Controls the start of an A/D conversion when the BURST bit is + 0 + lsb: 24 + reset_value: '0' + width: 3 + - EDGE: + access: rw + description: Controls rising or falling edge on the selected signal for the + start of a conversion + lsb: 27 + reset_value: '0' + width: 1 +- ADC1_CR: + fields: !!omap + - SEL: + access: rw + description: Selects which of the ADCn_[7:0] inputs are to be sampled and + converted + lsb: 0 + reset_value: '0' + width: 8 + - CLKDIV: + access: rw + description: The ADC clock is divided by the CLKDIV value plus one to produce + the clock for the A/D converter + lsb: 8 + reset_value: '0' + width: 8 + - BURST: + access: rw + description: Controls Burst mode + lsb: 16 + reset_value: '0' + width: 1 + - CLKS: + access: rw + description: This field selects the number of clocks used for each conversion + in Burst mode and the number of bits of accuracy of the result in the LS + bits of ADDR, between 11 clocks (10 bits) and 4 clocks (3 bits). + lsb: 17 + reset_value: '0' + width: 3 + - PDN: + access: rw + description: Power mode + lsb: 21 + reset_value: '0' + width: 1 + - START: + access: rw + description: Controls the start of an A/D conversion when the BURST bit is + 0 + lsb: 24 + reset_value: '0' + width: 3 + - EDGE: + access: rw + description: Controls rising or falling edge on the selected signal for the + start of a conversion + lsb: 27 + reset_value: '0' + width: 1 +- ADC0_GDR: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADCn pin selected by the SEL field, divided by the reference + voltage on the VDDA pin + lsb: 6 + reset_value: '0' + width: 10 + - CHN: + access: r + description: These bits contain the channel from which the LS bits were converted + lsb: 24 + reset_value: '0' + width: 3 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an analog-to-digital conversion completes. + It is cleared when this register is read and when the AD0/1CR register is + written + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_GDR: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADCn pin selected by the SEL field, divided by the reference + voltage on the VDDA pin + lsb: 6 + reset_value: '0' + width: 10 + - CHN: + access: r + description: These bits contain the channel from which the LS bits were converted + lsb: 24 + reset_value: '0' + width: 3 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an analog-to-digital conversion completes. + It is cleared when this register is read and when the AD0/1CR register is + written + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_INTEN: + fields: !!omap + - ADINTEN: + access: rw + description: These bits allow control over which A/D channels generate interrupts + for conversion completion + lsb: 0 + reset_value: '0' + width: 8 + - ADGINTEN: + access: rw + description: When 1, enables the global DONE flag in ADDR to generate an interrupt. + When 0, only the individual A/D channels enabled by ADINTEN 7:0 will generate + interrupts. + lsb: 8 + reset_value: '1' + width: 1 +- ADC1_INTEN: + fields: !!omap + - ADINTEN: + access: rw + description: These bits allow control over which A/D channels generate interrupts + for conversion completion + lsb: 0 + reset_value: '0' + width: 8 + - ADGINTEN: + access: rw + description: When 1, enables the global DONE flag in ADDR to generate an interrupt. + When 0, only the individual A/D channels enabled by ADINTEN 7:0 will generate + interrupts. + lsb: 8 + reset_value: '1' + width: 1 +- ADC0_DR0: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC0 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR0: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC0 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_DR1: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC1 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR1: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC1 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_DR2: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC2 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR2: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC2 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_DR3: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC3 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR3: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC3 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_DR4: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC4 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR4: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC4 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_DR5: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC5 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR5: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC5 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_DR6: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC6 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR6: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC6 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_DR7: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC7 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC1_DR7: + fields: !!omap + - V_VREF: + access: r + description: When DONE is 1, this field contains a binary fraction representing + the voltage on the ADC7 pin divided by the reference voltage on the VDDA + pin + lsb: 6 + reset_value: '0' + width: 10 + - OVERRUN: + access: r + description: This bit is 1 in burst mode if the results of one or more conversions + was (were) lost and overwritten before the conversion that produced the + result in the V_VREF bits in this register. + lsb: 30 + reset_value: '0' + width: 1 + - DONE: + access: r + description: This bit is set to 1 when an A/D conversion completes. + lsb: 31 + reset_value: '0' + width: 1 +- ADC0_STAT: + fields: !!omap + - DONE: + access: r + description: These bits mirror the DONE status flags that appear in the result + register for each A/D channel. + lsb: 0 + reset_value: '0' + width: 8 + - OVERRUN: + access: r + description: These bits mirror the OVERRRUN status flags that appear in the + result register for each A/D channel. + lsb: 8 + reset_value: '0' + width: 8 + - ADINT: + access: r + description: This bit is the A/D interrupt flag. It is one when any of the + individual A/D channel Done flags is asserted and enabled to contribute + to the A/D interrupt via the ADINTEN register. + lsb: 16 + reset_value: '0' + width: 1 |