diff options
Diffstat (limited to 'libopencm3/lib/stm32/common/pwr_common_all.c')
-rw-r--r-- | libopencm3/lib/stm32/common/pwr_common_all.c | 205 |
1 files changed, 205 insertions, 0 deletions
diff --git a/libopencm3/lib/stm32/common/pwr_common_all.c b/libopencm3/lib/stm32/common/pwr_common_all.c new file mode 100644 index 0000000..53e6b42 --- /dev/null +++ b/libopencm3/lib/stm32/common/pwr_common_all.c @@ -0,0 +1,205 @@ +/** @addtogroup pwr_file PWR + +@author @htmlonly © @endhtmlonly 2012 +Ken Sarkies <ksarkies@internode.on.net> + +*/ +/* + * This file is part of the libopencm3 project. + * + * Copyright (C) 2012 Ken Sarkies <ksarkies@internode.on.net> + * + * This library is free software: you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this library. If not, see <http://www.gnu.org/licenses/>. + */ + +/**@{*/ + +#include <libopencm3/stm32/pwr.h> + +/*---------------------------------------------------------------------------*/ +/** @brief Disable Backup Domain Write Protection. + +This allows backup domain registers to be changed. These registers are write +protected after a reset. +*/ + +void pwr_disable_backup_domain_write_protect(void) +{ + PWR_CR |= PWR_CR_DBP; +} + +/*---------------------------------------------------------------------------*/ +/** @brief Re-enable Backup Domain Write Protection. + +This protects backup domain registers from inadvertent change. +*/ + +void pwr_enable_backup_domain_write_protect(void) +{ + PWR_CR &= ~PWR_CR_DBP; +} + +/*---------------------------------------------------------------------------*/ +/** @brief Enable Power Voltage Detector. + +This provides voltage level threshold detection. The result of detection is +provided in the power voltage detector output flag (see @ref pwr_voltage_high) +or by setting the EXTI16 interrupt (see datasheet for configuration details). + +@param[in] pvd_level uint32_t. Taken from @ref pwr_pls. +*/ + +void pwr_enable_power_voltage_detect(uint32_t pvd_level) +{ + PWR_CR &= ~PWR_CR_PLS_MASK; + PWR_CR |= (PWR_CR_PVDE | pvd_level); +} + +/*---------------------------------------------------------------------------*/ +/** @brief Disable Power Voltage Detector. + +*/ + +void pwr_disable_power_voltage_detect(void) +{ + PWR_CR &= ~PWR_CR_PVDE; +} + +/*---------------------------------------------------------------------------*/ +/** @brief Clear the Standby Flag. + +This is set when the processor returns from a standby mode. +*/ + +void pwr_clear_standby_flag(void) +{ + PWR_CR |= PWR_CR_CSBF; +} + +/*---------------------------------------------------------------------------*/ +/** @brief Clear the Wakeup Flag. + +This is set when the processor receives a wakeup signal. +*/ + +void pwr_clear_wakeup_flag(void) +{ + PWR_CR |= PWR_CR_CWUF; +} + +/*---------------------------------------------------------------------------*/ +/** @brief Set Standby Mode in Deep Sleep. + +*/ + +void pwr_set_standby_mode(void) +{ + PWR_CR |= PWR_CR_PDDS; +} + +/*---------------------------------------------------------------------------*/ +/** @brief Set Stop Mode in Deep Sleep. + +*/ + +void pwr_set_stop_mode(void) +{ + PWR_CR &= ~PWR_CR_PDDS; +} + +/*---------------------------------------------------------------------------*/ +/** @brief Voltage Regulator On in Stop Mode. + +*/ + +void pwr_voltage_regulator_on_in_stop(void) +{ + PWR_CR &= ~PWR_CR_LPDS; +} + +/*---------------------------------------------------------------------------*/ +/** @brief Voltage Regulator Low Power in Stop Mode. + +*/ + +void pwr_voltage_regulator_low_power_in_stop(void) +{ + PWR_CR |= PWR_CR_LPDS; +} + +/*---------------------------------------------------------------------------*/ +/** @brief Enable Wakeup Pin. + +The wakeup pin is used for waking the processor from standby mode. +*/ + +void pwr_enable_wakeup_pin(void) +{ + PWR_CSR |= PWR_CSR_EWUP; +} + +/*---------------------------------------------------------------------------*/ +/** @brief Release Wakeup Pin. + +The wakeup pin is used for general purpose I/O. +*/ + +void pwr_disable_wakeup_pin(void) +{ + PWR_CSR &= ~PWR_CSR_EWUP; +} + +/*---------------------------------------------------------------------------*/ +/** @brief Get Voltage Detector Output. + +The voltage detector threshold must be set when the power voltage detector is +enabled, see @ref pwr_enable_power_voltage_detect. + +@returns boolean: TRUE if the power voltage is above the preset voltage +threshold. +*/ + +bool pwr_voltage_high(void) +{ + return PWR_CSR & PWR_CSR_PVDO; +} + +/*---------------------------------------------------------------------------*/ +/** @brief Get Standby Flag. + +The standby flag is set when the processor returns from a standby state. It is +cleared by software (see @ref pwr_clear_standby_flag). + +@returns boolean: TRUE if the processor was in standby state. +*/ + +bool pwr_get_standby_flag(void) +{ + return PWR_CSR & PWR_CSR_SBF; +} + +/*---------------------------------------------------------------------------*/ +/** @brief Get Wakeup Flag. + +The wakeup flag is set when a wakeup event has been received. It is +cleared by software (see @ref pwr_clear_wakeup_flag). + +@returns boolean: TRUE if a wakeup event was received. +*/ + +bool pwr_get_wakeup_flag(void) +{ + return PWR_CSR & PWR_CSR_WUF; +} +/**@}*/ |