1 files changed, 291 insertions, 0 deletions
diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c
new file mode 100644
index 00000000..2b8350b5
--- /dev/null
+++ b/sound/soc/pxa/zylonite.c
@@ -0,0 +1,291 @@
+/*
+ * zylonite.c  --  SoC audio for Zylonite
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include "../codecs/wm9713.h"
+#include "pxa2xx-ac97.h"
+#include "pxa-ssp.h"
+
+/*
+ * There is a physical switch SW15 on the board which changes the MCLK
+ * for the WM9713 between the standard AC97 master clock and the
+ * output of the CLK_POUT signal from the PXA.
+ */
+static int clk_pout;
+module_param(clk_pout, int, 0);
+MODULE_PARM_DESC(clk_pout, "Use CLK_POUT as WM9713 MCLK (SW15 on board).");
+
+static struct clk *pout;
+
+static struct snd_soc_card zylonite;
+
+static const struct snd_soc_dapm_widget zylonite_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_MIC("Headset Microphone", NULL),
+	SND_SOC_DAPM_MIC("Handset Microphone", NULL),
+	SND_SOC_DAPM_SPK("Multiactor", NULL),
+	SND_SOC_DAPM_SPK("Headset Earpiece", NULL),
+};
+
+/* Currently supported audio map */
+static const struct snd_soc_dapm_route audio_map[] = {
+
+	/* Headphone output connected to HPL/HPR */
+	{ "Headphone", NULL,  "HPL" },
+	{ "Headphone", NULL,  "HPR" },
+
+	/* On-board earpiece */
+	{ "Headset Earpiece", NULL, "OUT3" },
+
+	/* Headphone mic */
+	{ "MIC2A", NULL, "Mic Bias" },
+	{ "Mic Bias", NULL, "Headset Microphone" },
+
+	/* On-board mic */
+	{ "MIC1", NULL, "Mic Bias" },
+	{ "Mic Bias", NULL, "Handset Microphone" },
+
+	/* Multiactor differentially connected over SPKL/SPKR */
+	{ "Multiactor", NULL, "SPKL" },
+	{ "Multiactor", NULL, "SPKR" },
+};
+
+static int zylonite_wm9713_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+
+	if (clk_pout)
+		snd_soc_dai_set_pll(rtd->codec_dai, 0, 0,
+				    clk_get_rate(pout), 0);
+
+	snd_soc_dapm_new_controls(dapm, zylonite_dapm_widgets,
+				  ARRAY_SIZE(zylonite_dapm_widgets));
+
+	snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
+
+	/* Static setup for now */
+	snd_soc_dapm_enable_pin(dapm, "Headphone");
+	snd_soc_dapm_enable_pin(dapm, "Headset Earpiece");
+
+	snd_soc_dapm_sync(dapm);
+	return 0;
+}
+
+static int zylonite_voice_hw_params(struct snd_pcm_substream *substream,
+				    struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	unsigned int pll_out = 0;
+	unsigned int wm9713_div = 0;
+	int ret = 0;
+	int rate = params_rate(params);
+	int width = snd_pcm_format_physical_width(params_format(params));
+
+	/* Only support ratios that we can generate neatly from the AC97
+	 * based master clock - in particular, this excludes 44.1kHz.
+	 * In most applications the voice DAC will be used for telephony
+	 * data so multiples of 8kHz will be the common case.
+	 */
+	switch (rate) {
+	case 8000:
+		wm9713_div = 12;
+		break;
+	case 16000:
+		wm9713_div = 6;
+		break;
+	case 48000:
+		wm9713_div = 2;
+		break;
+	default:
+		/* Don't support OSS emulation */
+		return -EINVAL;
+	}
+
+	/* Add 1 to the width for the leading clock cycle */
+	pll_out = rate * (width + 1) * 8;
+
+	ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_AUDIO, 0, 1);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_pll(cpu_dai, 0, 0, 0, pll_out);
+	if (ret < 0)
+		return ret;
+
+	if (clk_pout)
+		ret = snd_soc_dai_set_clkdiv(codec_dai, WM9713_PCMCLK_PLL_DIV,
+					     WM9713_PCMDIV(wm9713_div));
+	else
+		ret = snd_soc_dai_set_clkdiv(codec_dai, WM9713_PCMCLK_DIV,
+					     WM9713_PCMDIV(wm9713_div));
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops zylonite_voice_ops = {
+	.hw_params = zylonite_voice_hw_params,
+};
+
+static struct snd_soc_dai_link zylonite_dai[] = {
+{
+	.name = "AC97",
+	.stream_name = "AC97 HiFi",
+	.codec_name = "wm9713-codec",
+	.platform_name = "pxa-pcm-audio",
+	.cpu_dai_name = "pxa2xx-ac97",
+	.codec_dai_name = "wm9713-hifi",
+	.init = zylonite_wm9713_init,
+},
+{
+	.name = "AC97 Aux",
+	.stream_name = "AC97 Aux",
+	.codec_name = "wm9713-codec",
+	.platform_name = "pxa-pcm-audio",
+	.cpu_dai_name = "pxa2xx-ac97-aux",
+	.codec_dai_name = "wm9713-aux",
+},
+{
+	.name = "WM9713 Voice",
+	.stream_name = "WM9713 Voice",
+	.codec_name = "wm9713-codec",
+	.platform_name = "pxa-pcm-audio",
+	.cpu_dai_name = "pxa-ssp-dai.2",
+	.codec_dai_name = "wm9713-voice",
+	.ops = &zylonite_voice_ops,
+},
+};
+
+static int zylonite_probe(struct snd_soc_card *card)
+{
+	int ret;
+
+	if (clk_pout) {
+		pout = clk_get(NULL, "CLK_POUT");
+		if (IS_ERR(pout)) {
+			dev_err(card->dev, "Unable to obtain CLK_POUT: %ld\n",
+				PTR_ERR(pout));
+			return PTR_ERR(pout);
+		}
+
+		ret = clk_enable(pout);
+		if (ret != 0) {
+			dev_err(card->dev, "Unable to enable CLK_POUT: %d\n",
+				ret);
+			clk_put(pout);
+			return ret;
+		}
+
+		dev_dbg(card->dev, "MCLK enabled at %luHz\n",
+			clk_get_rate(pout));
+	}
+
+	return 0;
+}
+
+static int zylonite_remove(struct snd_soc_card *card)
+{
+	if (clk_pout) {
+		clk_disable(pout);
+		clk_put(pout);
+	}
+
+	return 0;
+}
+
+static int zylonite_suspend_post(struct snd_soc_card *card)
+{
+	if (clk_pout)
+		clk_disable(pout);
+
+	return 0;
+}
+
+static int zylonite_resume_pre(struct snd_soc_card *card)
+{
+	int ret = 0;
+
+	if (clk_pout) {
+		ret = clk_enable(pout);
+		if (ret != 0)
+			dev_err(card->dev, "Unable to enable CLK_POUT: %d\n",
+				ret);
+	}
+
+	return ret;
+}
+
+static struct snd_soc_card zylonite = {
+	.name = "Zylonite",
+	.probe = &zylonite_probe,
+	.remove = &zylonite_remove,
+	.suspend_post = &zylonite_suspend_post,
+	.resume_pre = &zylonite_resume_pre,
+	.dai_link = zylonite_dai,
+	.num_links = ARRAY_SIZE(zylonite_dai),
+	.owner = THIS_MODULE,
+};
+
+static struct platform_device *zylonite_snd_ac97_device;
+
+static int __init zylonite_init(void)
+{
+	int ret;
+
+	zylonite_snd_ac97_device = platform_device_alloc("soc-audio", -1);
+	if (!zylonite_snd_ac97_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(zylonite_snd_ac97_device, &zylonite);
+
+	ret = platform_device_add(zylonite_snd_ac97_device);
+	if (ret != 0)
+		platform_device_put(zylonite_snd_ac97_device);
+
+	return ret;
+}
+
+static void __exit zylonite_exit(void)
+{
+	platform_device_unregister(zylonite_snd_ac97_device);
+}
+
+module_init(zylonite_init);
+module_exit(zylonite_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("ALSA SoC WM9713 Zylonite");
+MODULE_LICENSE("GPL");