1 files changed, 393 insertions, 0 deletions

diff --git a/sound/soc/blackfin/bf5xx-ac97.c b/sound/soc/blackfin/bf5xx-ac97.c
new file mode 100644
index 00000000..6d216259
--- /dev/null
+++ b/sound/soc/blackfin/bf5xx-ac97.c
@@ -0,0 +1,393 @@
+/*
+ * bf5xx-ac97.c -- AC97 support for the ADI blackfin chip.
+ *
+ * Author:	Roy Huang
+ * Created:	11th. June 2007
+ * Copyright:	Analog Device Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <asm/irq.h>
+#include <asm/portmux.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+
+#include "bf5xx-sport.h"
+#include "bf5xx-ac97.h"
+
+/* Anomaly notes:
+ *  05000250 -	AD1980 is running in TDM mode and RFS/TFS are generated by SPORT
+ *		contrtoller. But, RFSDIV and TFSDIV are always set to 16*16-1,
+ *		while the max AC97 data size is 13*16. The DIV is always larger
+ *		than data size. AD73311 and ad2602 are not running in TDM mode.
+ *		AD1836 and AD73322 depend on external RFS/TFS only. So, this
+ *		anomaly does not affect blackfin sound drivers.
+*/
+
+static struct sport_device *ac97_sport_handle;
+
+void bf5xx_pcm_to_ac97(struct ac97_frame *dst, const __u16 *src,
+		size_t count, unsigned int chan_mask)
+{
+	while (count--) {
+		dst->ac97_tag = TAG_VALID;
+		if (chan_mask & SP_FL) {
+			dst->ac97_pcm_r = *src++;
+			dst->ac97_tag |= TAG_PCM_RIGHT;
+		}
+		if (chan_mask & SP_FR) {
+			dst->ac97_pcm_l = *src++;
+			dst->ac97_tag |= TAG_PCM_LEFT;
+
+		}
+#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
+		if (chan_mask & SP_SR) {
+			dst->ac97_sl = *src++;
+			dst->ac97_tag |= TAG_PCM_SL;
+		}
+		if (chan_mask & SP_SL) {
+			dst->ac97_sr = *src++;
+			dst->ac97_tag |= TAG_PCM_SR;
+		}
+		if (chan_mask & SP_LFE) {
+			dst->ac97_lfe = *src++;
+			dst->ac97_tag |= TAG_PCM_LFE;
+		}
+		if (chan_mask & SP_FC) {
+			dst->ac97_center = *src++;
+			dst->ac97_tag |= TAG_PCM_CENTER;
+		}
+#endif
+		dst++;
+	}
+}
+EXPORT_SYMBOL(bf5xx_pcm_to_ac97);
+
+void bf5xx_ac97_to_pcm(const struct ac97_frame *src, __u16 *dst,
+		size_t count)
+{
+	while (count--) {
+		*(dst++) = src->ac97_pcm_l;
+		*(dst++) = src->ac97_pcm_r;
+		src++;
+	}
+}
+EXPORT_SYMBOL(bf5xx_ac97_to_pcm);
+
+static unsigned int sport_tx_curr_frag(struct sport_device *sport)
+{
+	return sport->tx_curr_frag = sport_curr_offset_tx(sport) /
+			sport->tx_fragsize;
+}
+
+static void enqueue_cmd(struct snd_ac97 *ac97, __u16 addr, __u16 data)
+{
+	struct sport_device *sport = ac97_sport_handle;
+	int *cmd_count = sport->private_data;
+	int nextfrag = sport_tx_curr_frag(sport);
+	struct ac97_frame *nextwrite;
+
+	sport_incfrag(sport, &nextfrag, 1);
+
+	nextwrite = (struct ac97_frame *)(sport->tx_buf +
+			nextfrag * sport->tx_fragsize);
+	pr_debug("sport->tx_buf:%p, nextfrag:0x%x nextwrite:%p, cmd_count:%d\n",
+		sport->tx_buf, nextfrag, nextwrite, cmd_count[nextfrag]);
+	nextwrite[cmd_count[nextfrag]].ac97_tag |= TAG_CMD;
+	nextwrite[cmd_count[nextfrag]].ac97_addr = addr;
+	nextwrite[cmd_count[nextfrag]].ac97_data = data;
+	++cmd_count[nextfrag];
+	pr_debug("ac97_sport: Inserting %02x/%04x into fragment %d\n",
+			addr >> 8, data, nextfrag);
+}
+
+static unsigned short bf5xx_ac97_read(struct snd_ac97 *ac97,
+	unsigned short reg)
+{
+	struct sport_device *sport_handle = ac97_sport_handle;
+	struct ac97_frame out_frame[2], in_frame[2];
+
+	pr_debug("%s enter 0x%x\n", __func__, reg);
+
+	/* When dma descriptor is enabled, the register should not be read */
+	if (sport_handle->tx_run || sport_handle->rx_run) {
+		pr_err("Could you send a mail to cliff.cai@analog.com "
+				"to report this?\n");
+		return -EFAULT;
+	}
+
+	memset(&out_frame, 0, 2 * sizeof(struct ac97_frame));
+	memset(&in_frame, 0, 2 * sizeof(struct ac97_frame));
+	out_frame[0].ac97_tag = TAG_VALID | TAG_CMD;
+	out_frame[0].ac97_addr = ((reg << 8) | 0x8000);
+	sport_send_and_recv(sport_handle, (unsigned char *)&out_frame,
+			(unsigned char *)&in_frame,
+			2 * sizeof(struct ac97_frame));
+	return in_frame[1].ac97_data;
+}
+
+void bf5xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+	unsigned short val)
+{
+	struct sport_device *sport_handle = ac97_sport_handle;
+
+	pr_debug("%s enter 0x%x:0x%04x\n", __func__, reg, val);
+
+	if (sport_handle->tx_run) {
+		enqueue_cmd(ac97, (reg << 8), val); /* write */
+		enqueue_cmd(ac97, (reg << 8) | 0x8000, 0); /* read back */
+	} else {
+		struct ac97_frame frame;
+		memset(&frame, 0, sizeof(struct ac97_frame));
+		frame.ac97_tag = TAG_VALID | TAG_CMD;
+		frame.ac97_addr = (reg << 8);
+		frame.ac97_data = val;
+		sport_send_and_recv(sport_handle, (unsigned char *)&frame, \
+				NULL, sizeof(struct ac97_frame));
+	}
+}
+
+static void bf5xx_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	struct sport_device *sport_handle = ac97_sport_handle;
+	u16 gpio = P_IDENT(sport_handle->pin_req[3]);
+
+	pr_debug("%s enter\n", __func__);
+
+	peripheral_free_list(sport_handle->pin_req);
+	gpio_request(gpio, "bf5xx-ac97");
+	gpio_direction_output(gpio, 1);
+	udelay(2);
+	gpio_set_value(gpio, 0);
+	udelay(1);
+	gpio_free(gpio);
+	peripheral_request_list(sport_handle->pin_req, "soc-audio");
+}
+
+static void bf5xx_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
+	pr_debug("%s enter\n", __func__);
+
+	/* It is specified for bf548-ezkit */
+	gpio_set_value(CONFIG_SND_BF5XX_RESET_GPIO_NUM, 0);
+	/* Keep reset pin low for 1 ms */
+	mdelay(1);
+	gpio_set_value(CONFIG_SND_BF5XX_RESET_GPIO_NUM, 1);
+	/* Wait for bit clock recover */
+	mdelay(1);
+#else
+	pr_info("%s: Not implemented\n", __func__);
+#endif
+}
+
+struct snd_ac97_bus_ops soc_ac97_ops = {
+	.read	= bf5xx_ac97_read,
+	.write	= bf5xx_ac97_write,
+	.warm_reset	= bf5xx_ac97_warm_reset,
+	.reset	= bf5xx_ac97_cold_reset,
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+#ifdef CONFIG_PM
+static int bf5xx_ac97_suspend(struct snd_soc_dai *dai)
+{
+	struct sport_device *sport = snd_soc_dai_get_drvdata(dai);
+
+	pr_debug("%s : sport %d\n", __func__, dai->id);
+	if (!dai->active)
+		return 0;
+	if (dai->capture_active)
+		sport_rx_stop(sport);
+	if (dai->playback_active)
+		sport_tx_stop(sport);
+	return 0;
+}
+
+static int bf5xx_ac97_resume(struct snd_soc_dai *dai)
+{
+	int ret;
+	struct sport_device *sport = snd_soc_dai_get_drvdata(dai);
+
+	pr_debug("%s : sport %d\n", __func__, dai->id);
+	if (!dai->active)
+		return 0;
+
+#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
+	ret = sport_set_multichannel(sport, 16, 0x3FF, 1);
+#else
+	ret = sport_set_multichannel(sport, 16, 0x1F, 1);
+#endif
+	if (ret) {
+		pr_err("SPORT is busy!\n");
+		return -EBUSY;
+	}
+
+	ret = sport_config_rx(sport, IRFS, 0xF, 0, (16*16-1));
+	if (ret) {
+		pr_err("SPORT is busy!\n");
+		return -EBUSY;
+	}
+
+	ret = sport_config_tx(sport, ITFS, 0xF, 0, (16*16-1));
+	if (ret) {
+		pr_err("SPORT is busy!\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+#else
+#define bf5xx_ac97_suspend	NULL
+#define bf5xx_ac97_resume	NULL
+#endif
+
+static struct snd_soc_dai_driver bfin_ac97_dai = {
+	.ac97_control = 1,
+	.suspend = bf5xx_ac97_suspend,
+	.resume = bf5xx_ac97_resume,
+	.playback = {
+		.stream_name = "AC97 Playback",
+		.channels_min = 2,
+#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
+		.channels_max = 6,
+#else
+		.channels_max = 2,
+#endif
+		.rates = SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
+	.capture = {
+		.stream_name = "AC97 Capture",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
+};
+
+static int __devinit asoc_bfin_ac97_probe(struct platform_device *pdev)
+{
+	struct sport_device *sport_handle;
+	int ret;
+
+#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
+	/* Request PB3 as reset pin */
+	if (gpio_request(CONFIG_SND_BF5XX_RESET_GPIO_NUM, "SND_AD198x RESET")) {
+		pr_err("Failed to request GPIO_%d for reset\n",
+				CONFIG_SND_BF5XX_RESET_GPIO_NUM);
+		ret =  -1;
+		goto gpio_err;
+	}
+	gpio_direction_output(CONFIG_SND_BF5XX_RESET_GPIO_NUM, 1);
+#endif
+
+	sport_handle = sport_init(pdev, 2, sizeof(struct ac97_frame),
+		PAGE_SIZE);
+	if (!sport_handle) {
+		ret = -ENODEV;
+		goto sport_err;
+	}
+
+	/*SPORT works in TDM mode to simulate AC97 transfers*/
+#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
+	ret = sport_set_multichannel(sport_handle, 16, 0x3FF, 1);
+#else
+	ret = sport_set_multichannel(sport_handle, 16, 0x1F, 1);
+#endif
+	if (ret) {
+		pr_err("SPORT is busy!\n");
+		ret = -EBUSY;
+		goto sport_config_err;
+	}
+
+	ret = sport_config_rx(sport_handle, IRFS, 0xF, 0, (16*16-1));
+	if (ret) {
+		pr_err("SPORT is busy!\n");
+		ret = -EBUSY;
+		goto sport_config_err;
+	}
+
+	ret = sport_config_tx(sport_handle, ITFS, 0xF, 0, (16*16-1));
+	if (ret) {
+		pr_err("SPORT is busy!\n");
+		ret = -EBUSY;
+		goto sport_config_err;
+	}
+
+	ret = snd_soc_register_dai(&pdev->dev, &bfin_ac97_dai);
+	if (ret) {
+		pr_err("Failed to register DAI: %d\n", ret);
+		goto sport_config_err;
+	}
+
+	ac97_sport_handle = sport_handle;
+
+	return 0;
+
+sport_config_err:
+	sport_done(sport_handle);
+sport_err:
+#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
+	gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM);
+gpio_err:
+#endif
+
+	return ret;
+}
+
+static int __devexit asoc_bfin_ac97_remove(struct platform_device *pdev)
+{
+	struct sport_device *sport_handle = platform_get_drvdata(pdev);
+
+	snd_soc_unregister_dai(&pdev->dev);
+	sport_done(sport_handle);
+#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
+	gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM);
+#endif
+
+	return 0;
+}
+
+static struct platform_driver asoc_bfin_ac97_driver = {
+	.driver = {
+			.name = "bfin-ac97",
+			.owner = THIS_MODULE,
+	},
+
+	.probe = asoc_bfin_ac97_probe,
+	.remove = __devexit_p(asoc_bfin_ac97_remove),
+};
+
+static int __init bfin_ac97_init(void)
+{
+	return platform_driver_register(&asoc_bfin_ac97_driver);
+}
+module_init(bfin_ac97_init);
+
+static void __exit bfin_ac97_exit(void)
+{
+	platform_driver_unregister(&asoc_bfin_ac97_driver);
+}
+module_exit(bfin_ac97_exit);
+
+
+MODULE_AUTHOR("Roy Huang");
+MODULE_DESCRIPTION("AC97 driver for ADI Blackfin");
+MODULE_LICENSE("GPL");