diff options
Diffstat (limited to 'net/mac80211/iface.c')
| -rw-r--r-- | net/mac80211/iface.c | 1417 |
1 files changed, 1417 insertions, 0 deletions
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c new file mode 100644 index 00000000..65f3764c --- /dev/null +++ b/net/mac80211/iface.c @@ -0,0 +1,1417 @@ +/* + * Interface handling (except master interface) + * + * Copyright 2002-2005, Instant802 Networks, Inc. + * Copyright 2005-2006, Devicescape Software, Inc. + * Copyright (c) 2006 Jiri Benc <jbenc@suse.cz> + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/if_arp.h> +#include <linux/netdevice.h> +#include <linux/rtnetlink.h> +#include <net/mac80211.h> +#include <net/ieee80211_radiotap.h> +#include "ieee80211_i.h" +#include "sta_info.h" +#include "debugfs_netdev.h" +#include "mesh.h" +#include "led.h" +#include "driver-ops.h" +#include "wme.h" +#include "rate.h" + +/** + * DOC: Interface list locking + * + * The interface list in each struct ieee80211_local is protected + * three-fold: + * + * (1) modifications may only be done under the RTNL + * (2) modifications and readers are protected against each other by + * the iflist_mtx. + * (3) modifications are done in an RCU manner so atomic readers + * can traverse the list in RCU-safe blocks. + * + * As a consequence, reads (traversals) of the list can be protected + * by either the RTNL, the iflist_mtx or RCU. + */ + + +static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) +{ + int meshhdrlen; + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + meshhdrlen = (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) ? 5 : 0; + + /* FIX: what would be proper limits for MTU? + * This interface uses 802.3 frames. */ + if (new_mtu < 256 || + new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) { + return -EINVAL; + } + +#ifdef CONFIG_MAC80211_VERBOSE_DEBUG + printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu); +#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ + dev->mtu = new_mtu; + return 0; +} + +static int ieee80211_change_mac(struct net_device *dev, void *addr) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct sockaddr *sa = addr; + int ret; + + if (ieee80211_sdata_running(sdata)) + return -EBUSY; + + ret = eth_mac_addr(dev, sa); + + if (ret == 0) + memcpy(sdata->vif.addr, sa->sa_data, ETH_ALEN); + + return ret; +} + +static inline int identical_mac_addr_allowed(int type1, int type2) +{ + return type1 == NL80211_IFTYPE_MONITOR || + type2 == NL80211_IFTYPE_MONITOR || + (type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_WDS) || + (type1 == NL80211_IFTYPE_WDS && + (type2 == NL80211_IFTYPE_WDS || + type2 == NL80211_IFTYPE_AP)) || + (type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_AP_VLAN) || + (type1 == NL80211_IFTYPE_AP_VLAN && + (type2 == NL80211_IFTYPE_AP || + type2 == NL80211_IFTYPE_AP_VLAN)); +} + +static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata, + enum nl80211_iftype iftype) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_sub_if_data *nsdata; + struct net_device *dev = sdata->dev; + + ASSERT_RTNL(); + + /* we hold the RTNL here so can safely walk the list */ + list_for_each_entry(nsdata, &local->interfaces, list) { + struct net_device *ndev = nsdata->dev; + + if (ndev != dev && ieee80211_sdata_running(nsdata)) { + /* + * Allow only a single IBSS interface to be up at any + * time. This is restricted because beacon distribution + * cannot work properly if both are in the same IBSS. + * + * To remove this restriction we'd have to disallow them + * from setting the same SSID on different IBSS interfaces + * belonging to the same hardware. Then, however, we're + * faced with having to adopt two different TSF timers... + */ + if (iftype == NL80211_IFTYPE_ADHOC && + nsdata->vif.type == NL80211_IFTYPE_ADHOC) + return -EBUSY; + + /* + * The remaining checks are only performed for interfaces + * with the same MAC address. + */ + if (compare_ether_addr(dev->dev_addr, ndev->dev_addr)) + continue; + + /* + * check whether it may have the same address + */ + if (!identical_mac_addr_allowed(iftype, + nsdata->vif.type)) + return -ENOTUNIQ; + + /* + * can only add VLANs to enabled APs + */ + if (iftype == NL80211_IFTYPE_AP_VLAN && + nsdata->vif.type == NL80211_IFTYPE_AP) + sdata->bss = &nsdata->u.ap; + } + } + + return 0; +} + +void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata, + const int offset) +{ + struct ieee80211_local *local = sdata->local; + u32 flags = sdata->u.mntr_flags; + +#define ADJUST(_f, _s) do { \ + if (flags & MONITOR_FLAG_##_f) \ + local->fif_##_s += offset; \ + } while (0) + + ADJUST(FCSFAIL, fcsfail); + ADJUST(PLCPFAIL, plcpfail); + ADJUST(CONTROL, control); + ADJUST(CONTROL, pspoll); + ADJUST(OTHER_BSS, other_bss); + +#undef ADJUST +} + +/* + * NOTE: Be very careful when changing this function, it must NOT return + * an error on interface type changes that have been pre-checked, so most + * checks should be in ieee80211_check_concurrent_iface. + */ +static int ieee80211_do_open(struct net_device *dev, bool coming_up) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; + struct sta_info *sta; + u32 changed = 0; + int res; + u32 hw_reconf_flags = 0; + + switch (sdata->vif.type) { + case NL80211_IFTYPE_WDS: + if (!is_valid_ether_addr(sdata->u.wds.remote_addr)) + return -ENOLINK; + break; + case NL80211_IFTYPE_AP_VLAN: + if (!sdata->bss) + return -ENOLINK; + list_add(&sdata->u.vlan.list, &sdata->bss->vlans); + break; + case NL80211_IFTYPE_AP: + sdata->bss = &sdata->u.ap; + break; + case NL80211_IFTYPE_MESH_POINT: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_ADHOC: + /* no special treatment */ + break; + case NL80211_IFTYPE_UNSPECIFIED: + case NUM_NL80211_IFTYPES: + case NL80211_IFTYPE_P2P_CLIENT: + case NL80211_IFTYPE_P2P_GO: + /* cannot happen */ + WARN_ON(1); + break; + } + + if (local->open_count == 0) { + res = drv_start(local); + if (res) + goto err_del_bss; + if (local->ops->napi_poll) + napi_enable(&local->napi); + /* we're brought up, everything changes */ + hw_reconf_flags = ~0; + ieee80211_led_radio(local, true); + ieee80211_mod_tpt_led_trig(local, + IEEE80211_TPT_LEDTRIG_FL_RADIO, 0); + } + + /* + * Copy the hopefully now-present MAC address to + * this interface, if it has the special null one. + */ + if (is_zero_ether_addr(dev->dev_addr)) { + memcpy(dev->dev_addr, + local->hw.wiphy->perm_addr, + ETH_ALEN); + memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN); + + if (!is_valid_ether_addr(dev->dev_addr)) { + if (!local->open_count) + drv_stop(local); + return -EADDRNOTAVAIL; + } + } + + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP_VLAN: + /* no need to tell driver */ + break; + case NL80211_IFTYPE_MONITOR: + if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) { + local->cooked_mntrs++; + break; + } + + /* must be before the call to ieee80211_configure_filter */ + local->monitors++; + if (local->monitors == 1) { + local->hw.conf.flags |= IEEE80211_CONF_MONITOR; + hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR; + } + + ieee80211_adjust_monitor_flags(sdata, 1); + ieee80211_configure_filter(local); + + netif_carrier_on(dev); + break; + default: + if (coming_up) { + res = drv_add_interface(local, &sdata->vif); + if (res) + goto err_stop; + } + + if (sdata->vif.type == NL80211_IFTYPE_AP) { + local->fif_pspoll++; + local->fif_probe_req++; + + ieee80211_configure_filter(local); + } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { + local->fif_probe_req++; + } + + changed |= ieee80211_reset_erp_info(sdata); + ieee80211_bss_info_change_notify(sdata, changed); + + if (sdata->vif.type == NL80211_IFTYPE_STATION) + netif_carrier_off(dev); + else + netif_carrier_on(dev); + } + + set_bit(SDATA_STATE_RUNNING, &sdata->state); + + if (sdata->vif.type == NL80211_IFTYPE_WDS) { + /* Create STA entry for the WDS peer */ + sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr, + GFP_KERNEL); + if (!sta) { + res = -ENOMEM; + goto err_del_interface; + } + + /* no locking required since STA is not live yet */ + sta->flags |= WLAN_STA_AUTHORIZED; + + res = sta_info_insert(sta); + if (res) { + /* STA has been freed */ + goto err_del_interface; + } + + rate_control_rate_init(sta); + } + + /* + * set_multicast_list will be invoked by the networking core + * which will check whether any increments here were done in + * error and sync them down to the hardware as filter flags. + */ + if (sdata->flags & IEEE80211_SDATA_ALLMULTI) + atomic_inc(&local->iff_allmultis); + + if (sdata->flags & IEEE80211_SDATA_PROMISC) + atomic_inc(&local->iff_promiscs); + + mutex_lock(&local->mtx); + hw_reconf_flags |= __ieee80211_recalc_idle(local); + mutex_unlock(&local->mtx); + + if (coming_up) + local->open_count++; + + if (hw_reconf_flags) { + ieee80211_hw_config(local, hw_reconf_flags); + /* + * set default queue parameters so drivers don't + * need to initialise the hardware if the hardware + * doesn't start up with sane defaults + */ + ieee80211_set_wmm_default(sdata); + } + + ieee80211_recalc_ps(local, -1); + + netif_tx_start_all_queues(dev); + + return 0; + err_del_interface: + drv_remove_interface(local, &sdata->vif); + err_stop: + if (!local->open_count) + drv_stop(local); + err_del_bss: + sdata->bss = NULL; + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + list_del(&sdata->u.vlan.list); + clear_bit(SDATA_STATE_RUNNING, &sdata->state); + return res; +} + +static int ieee80211_open(struct net_device *dev) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + int err; + + /* fail early if user set an invalid address */ + if (!is_zero_ether_addr(dev->dev_addr) && + !is_valid_ether_addr(dev->dev_addr)) + return -EADDRNOTAVAIL; + + err = ieee80211_check_concurrent_iface(sdata, sdata->vif.type); + if (err) + return err; + + return ieee80211_do_open(dev, true); +} + +static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, + bool going_down) +{ + struct ieee80211_local *local = sdata->local; + unsigned long flags; + struct sk_buff *skb, *tmp; + u32 hw_reconf_flags = 0; + int i; + enum nl80211_channel_type orig_ct; + + clear_bit(SDATA_STATE_RUNNING, &sdata->state); + + if (local->scan_sdata == sdata) + ieee80211_scan_cancel(local); + + /* + * Stop TX on this interface first. + */ + netif_tx_stop_all_queues(sdata->dev); + + /* + * Purge work for this interface. + */ + ieee80211_work_purge(sdata); + + /* + * Remove all stations associated with this interface. + * + * This must be done before calling ops->remove_interface() + * because otherwise we can later invoke ops->sta_notify() + * whenever the STAs are removed, and that invalidates driver + * assumptions about always getting a vif pointer that is valid + * (because if we remove a STA after ops->remove_interface() + * the driver will have removed the vif info already!) + * + * This is relevant only in AP, WDS and mesh modes, since in + * all other modes we've already removed all stations when + * disconnecting etc. + */ + sta_info_flush(local, sdata); + + /* + * Don't count this interface for promisc/allmulti while it + * is down. dev_mc_unsync() will invoke set_multicast_list + * on the master interface which will sync these down to the + * hardware as filter flags. + */ + if (sdata->flags & IEEE80211_SDATA_ALLMULTI) + atomic_dec(&local->iff_allmultis); + + if (sdata->flags & IEEE80211_SDATA_PROMISC) + atomic_dec(&local->iff_promiscs); + + if (sdata->vif.type == NL80211_IFTYPE_AP) { + local->fif_pspoll--; + local->fif_probe_req--; + } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { + local->fif_probe_req--; + } + + netif_addr_lock_bh(sdata->dev); + spin_lock_bh(&local->filter_lock); + __hw_addr_unsync(&local->mc_list, &sdata->dev->mc, + sdata->dev->addr_len); + spin_unlock_bh(&local->filter_lock); + netif_addr_unlock_bh(sdata->dev); + + ieee80211_configure_filter(local); + + del_timer_sync(&local->dynamic_ps_timer); + cancel_work_sync(&local->dynamic_ps_enable_work); + + /* APs need special treatment */ + if (sdata->vif.type == NL80211_IFTYPE_AP) { + struct ieee80211_sub_if_data *vlan, *tmpsdata; + struct beacon_data *old_beacon = + rtnl_dereference(sdata->u.ap.beacon); + + /* sdata_running will return false, so this will disable */ + ieee80211_bss_info_change_notify(sdata, + BSS_CHANGED_BEACON_ENABLED); + + /* remove beacon */ + rcu_assign_pointer(sdata->u.ap.beacon, NULL); + synchronize_rcu(); + kfree(old_beacon); + + /* free all potentially still buffered bcast frames */ + while ((skb = skb_dequeue(&sdata->u.ap.ps_bc_buf))) { + local->total_ps_buffered--; + dev_kfree_skb(skb); + } + + /* down all dependent devices, that is VLANs */ + list_for_each_entry_safe(vlan, tmpsdata, &sdata->u.ap.vlans, + u.vlan.list) + dev_close(vlan->dev); + WARN_ON(!list_empty(&sdata->u.ap.vlans)); + } + + if (going_down) + local->open_count--; + + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP_VLAN: + list_del(&sdata->u.vlan.list); + /* no need to tell driver */ + break; + case NL80211_IFTYPE_MONITOR: + if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) { + local->cooked_mntrs--; + break; + } + + local->monitors--; + if (local->monitors == 0) { + local->hw.conf.flags &= ~IEEE80211_CONF_MONITOR; + hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR; + } + + ieee80211_adjust_monitor_flags(sdata, -1); + ieee80211_configure_filter(local); + break; + default: + mutex_lock(&local->mtx); + if (local->hw_roc_dev == sdata->dev && + local->hw_roc_channel) { + /* ignore return value since this is racy */ + drv_cancel_remain_on_channel(local); + ieee80211_queue_work(&local->hw, &local->hw_roc_done); + } + mutex_unlock(&local->mtx); + + flush_work(&local->hw_roc_start); + flush_work(&local->hw_roc_done); + + flush_work(&sdata->work); + /* + * When we get here, the interface is marked down. + * Call synchronize_rcu() to wait for the RX path + * should it be using the interface and enqueuing + * frames at this very time on another CPU. + */ + synchronize_rcu(); + skb_queue_purge(&sdata->skb_queue); + + /* + * Disable beaconing here for mesh only, AP and IBSS + * are already taken care of. + */ + if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) + ieee80211_bss_info_change_notify(sdata, + BSS_CHANGED_BEACON_ENABLED); + + /* + * Free all remaining keys, there shouldn't be any, + * except maybe group keys in AP more or WDS? + */ + ieee80211_free_keys(sdata); + + if (going_down) + drv_remove_interface(local, &sdata->vif); + } + + sdata->bss = NULL; + + mutex_lock(&local->mtx); + hw_reconf_flags |= __ieee80211_recalc_idle(local); + mutex_unlock(&local->mtx); + + ieee80211_recalc_ps(local, -1); + + if (local->open_count == 0) { + if (local->ops->napi_poll) + napi_disable(&local->napi); + ieee80211_clear_tx_pending(local); + ieee80211_stop_device(local); + + /* no reconfiguring after stop! */ + hw_reconf_flags = 0; + } + + /* Re-calculate channel-type, in case there are multiple vifs + * on different channel types. + */ + orig_ct = local->_oper_channel_type; + ieee80211_set_channel_type(local, NULL, NL80211_CHAN_NO_HT); + + /* do after stop to avoid reconfiguring when we stop anyway */ + if (hw_reconf_flags || (orig_ct != local->_oper_channel_type)) + ieee80211_hw_config(local, hw_reconf_flags); + + spin_lock_irqsave(&local->queue_stop_reason_lock, flags); + for (i = 0; i < IEEE80211_MAX_QUEUES; i++) { + skb_queue_walk_safe(&local->pending[i], skb, tmp) { + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + if (info->control.vif == &sdata->vif) { + __skb_unlink(skb, &local->pending[i]); + dev_kfree_skb_irq(skb); + } + } + } + spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); +} + +static int ieee80211_stop(struct net_device *dev) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + ieee80211_do_stop(sdata, true); + + return 0; +} + +static void ieee80211_set_multicast_list(struct net_device *dev) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; + int allmulti, promisc, sdata_allmulti, sdata_promisc; + + allmulti = !!(dev->flags & IFF_ALLMULTI); + promisc = !!(dev->flags & IFF_PROMISC); + sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI); + sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC); + + if (allmulti != sdata_allmulti) { + if (dev->flags & IFF_ALLMULTI) + atomic_inc(&local->iff_allmultis); + else + atomic_dec(&local->iff_allmultis); + sdata->flags ^= IEEE80211_SDATA_ALLMULTI; + } + + if (promisc != sdata_promisc) { + if (dev->flags & IFF_PROMISC) + atomic_inc(&local->iff_promiscs); + else + atomic_dec(&local->iff_promiscs); + sdata->flags ^= IEEE80211_SDATA_PROMISC; + } + spin_lock_bh(&local->filter_lock); + __hw_addr_sync(&local->mc_list, &dev->mc, dev->addr_len); + spin_unlock_bh(&local->filter_lock); + ieee80211_queue_work(&local->hw, &local->reconfig_filter); +} + +/* + * Called when the netdev is removed or, by the code below, before + * the interface type changes. + */ +static void ieee80211_teardown_sdata(struct net_device *dev) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; + int flushed; + int i; + + /* free extra data */ + ieee80211_free_keys(sdata); + + ieee80211_debugfs_remove_netdev(sdata); + + for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) + __skb_queue_purge(&sdata->fragments[i].skb_list); + sdata->fragment_next = 0; + + if (ieee80211_vif_is_mesh(&sdata->vif)) + mesh_rmc_free(sdata); + + flushed = sta_info_flush(local, sdata); + WARN_ON(flushed); +} + +static u16 ieee80211_netdev_select_queue(struct net_device *dev, + struct sk_buff *skb) +{ + return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb); +} + +static const struct net_device_ops ieee80211_dataif_ops = { + .ndo_open = ieee80211_open, + .ndo_stop = ieee80211_stop, + .ndo_uninit = ieee80211_teardown_sdata, + .ndo_start_xmit = ieee80211_subif_start_xmit, + .ndo_set_multicast_list = ieee80211_set_multicast_list, + .ndo_change_mtu = ieee80211_change_mtu, + .ndo_set_mac_address = ieee80211_change_mac, + .ndo_select_queue = ieee80211_netdev_select_queue, +}; + +static u16 ieee80211_monitor_select_queue(struct net_device *dev, + struct sk_buff *skb) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; + struct ieee80211_hdr *hdr; + struct ieee80211_radiotap_header *rtap = (void *)skb->data; + u8 *p; + + if (local->hw.queues < 4) + return 0; + + if (skb->len < 4 || + skb->len < le16_to_cpu(rtap->it_len) + 2 /* frame control */) + return 0; /* doesn't matter, frame will be dropped */ + + hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len)); + + if (!ieee80211_is_data(hdr->frame_control)) { + skb->priority = 7; + return ieee802_1d_to_ac[skb->priority]; + } + if (!ieee80211_is_data_qos(hdr->frame_control)) { + skb->priority = 0; + return ieee802_1d_to_ac[skb->priority]; + } + + p = ieee80211_get_qos_ctl(hdr); + skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK; + + return ieee80211_downgrade_queue(local, skb); +} + +static const struct net_device_ops ieee80211_monitorif_ops = { + .ndo_open = ieee80211_open, + .ndo_stop = ieee80211_stop, + .ndo_uninit = ieee80211_teardown_sdata, + .ndo_start_xmit = ieee80211_monitor_start_xmit, + .ndo_set_multicast_list = ieee80211_set_multicast_list, + .ndo_change_mtu = ieee80211_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_select_queue = ieee80211_monitor_select_queue, +}; + +static void ieee80211_if_setup(struct net_device *dev) +{ + ether_setup(dev); + dev->priv_flags &= ~IFF_TX_SKB_SHARING; + dev->netdev_ops = &ieee80211_dataif_ops; + dev->destructor = free_netdev; +} + +static void ieee80211_iface_work(struct work_struct *work) +{ + struct ieee80211_sub_if_data *sdata = + container_of(work, struct ieee80211_sub_if_data, work); + struct ieee80211_local *local = sdata->local; + struct sk_buff *skb; + struct sta_info *sta; + struct ieee80211_ra_tid *ra_tid; + + if (!ieee80211_sdata_running(sdata)) + return; + + if (local->scanning) + return; + + /* + * ieee80211_queue_work() should have picked up most cases, + * here we'll pick the rest. + */ + if (WARN(local->suspended, + "interface work scheduled while going to suspend\n")) + return; + + /* first process frames */ + while ((skb = skb_dequeue(&sdata->skb_queue))) { + struct ieee80211_mgmt *mgmt = (void *)skb->data; + + if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_START) { + ra_tid = (void *)&skb->cb; + ieee80211_start_tx_ba_cb(&sdata->vif, ra_tid->ra, + ra_tid->tid); + } else if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_STOP) { + ra_tid = (void *)&skb->cb; + ieee80211_stop_tx_ba_cb(&sdata->vif, ra_tid->ra, + ra_tid->tid); + } else if (ieee80211_is_action(mgmt->frame_control) && + mgmt->u.action.category == WLAN_CATEGORY_BACK) { + int len = skb->len; + + mutex_lock(&local->sta_mtx); + sta = sta_info_get_bss(sdata, mgmt->sa); + if (sta) { + switch (mgmt->u.action.u.addba_req.action_code) { + case WLAN_ACTION_ADDBA_REQ: + ieee80211_process_addba_request( + local, sta, mgmt, len); + break; + case WLAN_ACTION_ADDBA_RESP: + ieee80211_process_addba_resp(local, sta, + mgmt, len); + break; + case WLAN_ACTION_DELBA: + ieee80211_process_delba(sdata, sta, + mgmt, len); + break; + default: + WARN_ON(1); + break; + } + } + mutex_unlock(&local->sta_mtx); + } else if (ieee80211_is_data_qos(mgmt->frame_control)) { + struct ieee80211_hdr *hdr = (void *)mgmt; + /* + * So the frame isn't mgmt, but frame_control + * is at the right place anyway, of course, so + * the if statement is correct. + * + * Warn if we have other data frame types here, + * they must not get here. + */ + WARN_ON(hdr->frame_control & + cpu_to_le16(IEEE80211_STYPE_NULLFUNC)); + WARN_ON(!(hdr->seq_ctrl & + cpu_to_le16(IEEE80211_SCTL_FRAG))); + /* + * This was a fragment of a frame, received while + * a block-ack session was active. That cannot be + * right, so terminate the session. + */ + mutex_lock(&local->sta_mtx); + sta = sta_info_get_bss(sdata, mgmt->sa); + if (sta) { + u16 tid = *ieee80211_get_qos_ctl(hdr) & + IEEE80211_QOS_CTL_TID_MASK; + + __ieee80211_stop_rx_ba_session( + sta, tid, WLAN_BACK_RECIPIENT, + WLAN_REASON_QSTA_REQUIRE_SETUP, + true); + } + mutex_unlock(&local->sta_mtx); + } else switch (sdata->vif.type) { + case NL80211_IFTYPE_STATION: + ieee80211_sta_rx_queued_mgmt(sdata, skb); + break; + case NL80211_IFTYPE_ADHOC: + ieee80211_ibss_rx_queued_mgmt(sdata, skb); + break; + case NL80211_IFTYPE_MESH_POINT: + if (!ieee80211_vif_is_mesh(&sdata->vif)) + break; + ieee80211_mesh_rx_queued_mgmt(sdata, skb); + break; + default: + WARN(1, "frame for unexpected interface type"); + break; + } + + kfree_skb(skb); + } + + /* then other type-dependent work */ + switch (sdata->vif.type) { + case NL80211_IFTYPE_STATION: + ieee80211_sta_work(sdata); + break; + case NL80211_IFTYPE_ADHOC: + ieee80211_ibss_work(sdata); + break; + case NL80211_IFTYPE_MESH_POINT: + if (!ieee80211_vif_is_mesh(&sdata->vif)) + break; + ieee80211_mesh_work(sdata); + break; + default: + break; + } +} + + +/* + * Helper function to initialise an interface to a specific type. + */ +static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, + enum nl80211_iftype type) +{ + /* clear type-dependent union */ + memset(&sdata->u, 0, sizeof(sdata->u)); + + /* and set some type-dependent values */ + sdata->vif.type = type; + sdata->vif.p2p = false; + sdata->dev->netdev_ops = &ieee80211_dataif_ops; + sdata->wdev.iftype = type; + + sdata->control_port_protocol = cpu_to_be16(ETH_P_PAE); + sdata->control_port_no_encrypt = false; + + /* only monitor differs */ + sdata->dev->type = ARPHRD_ETHER; + + skb_queue_head_init(&sdata->skb_queue); + INIT_WORK(&sdata->work, ieee80211_iface_work); + + switch (type) { + case NL80211_IFTYPE_P2P_GO: + type = NL80211_IFTYPE_AP; + sdata->vif.type = type; + sdata->vif.p2p = true; + /* fall through */ + case NL80211_IFTYPE_AP: + skb_queue_head_init(&sdata->u.ap.ps_bc_buf); + INIT_LIST_HEAD(&sdata->u.ap.vlans); + break; + case NL80211_IFTYPE_P2P_CLIENT: + type = NL80211_IFTYPE_STATION; + sdata->vif.type = type; + sdata->vif.p2p = true; + /* fall through */ + case NL80211_IFTYPE_STATION: + ieee80211_sta_setup_sdata(sdata); + break; + case NL80211_IFTYPE_ADHOC: + ieee80211_ibss_setup_sdata(sdata); + break; + case NL80211_IFTYPE_MESH_POINT: + if (ieee80211_vif_is_mesh(&sdata->vif)) + ieee80211_mesh_init_sdata(sdata); + break; + case NL80211_IFTYPE_MONITOR: + sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP; + sdata->dev->netdev_ops = &ieee80211_monitorif_ops; + sdata->u.mntr_flags = MONITOR_FLAG_CONTROL | + MONITOR_FLAG_OTHER_BSS; + break; + case NL80211_IFTYPE_WDS: + case NL80211_IFTYPE_AP_VLAN: + break; + case NL80211_IFTYPE_UNSPECIFIED: + case NUM_NL80211_IFTYPES: + BUG(); + break; + } + + ieee80211_debugfs_add_netdev(sdata); +} + +static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata, + enum nl80211_iftype type) +{ + struct ieee80211_local *local = sdata->local; + int ret, err; + enum nl80211_iftype internal_type = type; + bool p2p = false; + + ASSERT_RTNL(); + + if (!local->ops->change_interface) + return -EBUSY; + + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + /* + * Could maybe also all others here? + * Just not sure how that interacts + * with the RX/config path e.g. for + * mesh. + */ + break; + default: + return -EBUSY; + } + + switch (type) { + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + /* + * Could probably support everything + * but WDS here (WDS do_open can fail + * under memory pressure, which this + * code isn't prepared to handle). + */ + break; + case NL80211_IFTYPE_P2P_CLIENT: + p2p = true; + internal_type = NL80211_IFTYPE_STATION; + break; + case NL80211_IFTYPE_P2P_GO: + p2p = true; + internal_type = NL80211_IFTYPE_AP; + break; + default: + return -EBUSY; + } + + ret = ieee80211_check_concurrent_iface(sdata, internal_type); + if (ret) + return ret; + + ieee80211_do_stop(sdata, false); + + ieee80211_teardown_sdata(sdata->dev); + + ret = drv_change_interface(local, sdata, internal_type, p2p); + if (ret) + type = sdata->vif.type; + + ieee80211_setup_sdata(sdata, type); + + err = ieee80211_do_open(sdata->dev, false); + WARN(err, "type change: do_open returned %d", err); + + return ret; +} + +int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata, + enum nl80211_iftype type) +{ + int ret; + + ASSERT_RTNL(); + + if (type == ieee80211_vif_type_p2p(&sdata->vif)) + return 0; + + /* Setting ad-hoc mode on non-IBSS channel is not supported. */ + if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS && + type == NL80211_IFTYPE_ADHOC) + return -EOPNOTSUPP; + + if (ieee80211_sdata_running(sdata)) { + ret = ieee80211_runtime_change_iftype(sdata, type); + if (ret) + return ret; + } else { + /* Purge and reset type-dependent state. */ + ieee80211_teardown_sdata(sdata->dev); + ieee80211_setup_sdata(sdata, type); + } + + /* reset some values that shouldn't be kept across type changes */ + sdata->vif.bss_conf.basic_rates = + ieee80211_mandatory_rates(sdata->local, + sdata->local->hw.conf.channel->band); + sdata->drop_unencrypted = 0; + if (type == NL80211_IFTYPE_STATION) + sdata->u.mgd.use_4addr = false; + + return 0; +} + +static void ieee80211_assign_perm_addr(struct ieee80211_local *local, + struct net_device *dev, + enum nl80211_iftype type) +{ + struct ieee80211_sub_if_data *sdata; + u64 mask, start, addr, val, inc; + u8 *m; + u8 tmp_addr[ETH_ALEN]; + int i; + + /* default ... something at least */ + memcpy(dev->perm_addr, local->hw.wiphy->perm_addr, ETH_ALEN); + + if (is_zero_ether_addr(local->hw.wiphy->addr_mask) && + local->hw.wiphy->n_addresses <= 1) + return; + + + mutex_lock(&local->iflist_mtx); + + switch (type) { + case NL80211_IFTYPE_MONITOR: + /* doesn't matter */ + break; + case NL80211_IFTYPE_WDS: + case NL80211_IFTYPE_AP_VLAN: + /* match up with an AP interface */ + list_for_each_entry(sdata, &local->interfaces, list) { + if (sdata->vif.type != NL80211_IFTYPE_AP) + continue; + memcpy(dev->perm_addr, sdata->vif.addr, ETH_ALEN); + break; + } + /* keep default if no AP interface present */ + break; + default: + /* assign a new address if possible -- try n_addresses first */ + for (i = 0; i < local->hw.wiphy->n_addresses; i++) { + bool used = false; + + list_for_each_entry(sdata, &local->interfaces, list) { + if (memcmp(local->hw.wiphy->addresses[i].addr, + sdata->vif.addr, ETH_ALEN) == 0) { + used = true; + break; + } + } + + if (!used) { + memcpy(dev->perm_addr, + local->hw.wiphy->addresses[i].addr, + ETH_ALEN); + break; + } + } + + /* try mask if available */ + if (is_zero_ether_addr(local->hw.wiphy->addr_mask)) + break; + + m = local->hw.wiphy->addr_mask; + mask = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | + ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | + ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); + + if (__ffs64(mask) + hweight64(mask) != fls64(mask)) { + /* not a contiguous mask ... not handled now! */ + printk(KERN_DEBUG "not contiguous\n"); + break; + } + + m = local->hw.wiphy->perm_addr; + start = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | + ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | + ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); + + inc = 1ULL<<__ffs64(mask); + val = (start & mask); + addr = (start & ~mask) | (val & mask); + do { + bool used = false; + + tmp_addr[5] = addr >> 0*8; + tmp_addr[4] = addr >> 1*8; + tmp_addr[3] = addr >> 2*8; + tmp_addr[2] = addr >> 3*8; + tmp_addr[1] = addr >> 4*8; + tmp_addr[0] = addr >> 5*8; + + val += inc; + + list_for_each_entry(sdata, &local->interfaces, list) { + if (memcmp(tmp_addr, sdata->vif.addr, + ETH_ALEN) == 0) { + used = true; + break; + } + } + + if (!used) { + memcpy(dev->perm_addr, tmp_addr, ETH_ALEN); + break; + } + addr = (start & ~mask) | (val & mask); + } while (addr != start); + + break; + } + + mutex_unlock(&local->iflist_mtx); +} + +int ieee80211_if_add(struct ieee80211_local *local, const char *name, + struct net_device **new_dev, enum nl80211_iftype type, + struct vif_params *params) +{ + struct net_device *ndev; + struct ieee80211_sub_if_data *sdata = NULL; + int ret, i; + + ASSERT_RTNL(); + + ndev = alloc_netdev_mq(sizeof(*sdata) + local->hw.vif_data_size, + name, ieee80211_if_setup, local->hw.queues); + if (!ndev) + return -ENOMEM; + dev_net_set(ndev, wiphy_net(local->hw.wiphy)); + + ndev->needed_headroom = local->tx_headroom + + 4*6 /* four MAC addresses */ + + 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */ + + 6 /* mesh */ + + 8 /* rfc1042/bridge tunnel */ + - ETH_HLEN /* ethernet hard_header_len */ + + IEEE80211_ENCRYPT_HEADROOM; + ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM; + + ret = dev_alloc_name(ndev, ndev->name); + if (ret < 0) + goto fail; + + ieee80211_assign_perm_addr(local, ndev, type); + memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN); + SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy)); + + /* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */ + sdata = netdev_priv(ndev); + ndev->ieee80211_ptr = &sdata->wdev; + memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN); + memcpy(sdata->name, ndev->name, IFNAMSIZ); + + /* initialise type-independent data */ + sdata->wdev.wiphy = local->hw.wiphy; + sdata->local = local; + sdata->dev = ndev; +#ifdef CONFIG_INET + sdata->arp_filter_state = true; +#endif + + for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) + skb_queue_head_init(&sdata->fragments[i].skb_list); + + INIT_LIST_HEAD(&sdata->key_list); + + for (i = 0; i < IEEE80211_NUM_BANDS; i++) { + struct ieee80211_supported_band *sband; + sband = local->hw.wiphy->bands[i]; + sdata->rc_rateidx_mask[i] = + sband ? (1 << sband->n_bitrates) - 1 : 0; + } + + /* setup type-dependent data */ + ieee80211_setup_sdata(sdata, type); + + if (params) { + ndev->ieee80211_ptr->use_4addr = params->use_4addr; + if (type == NL80211_IFTYPE_STATION) + sdata->u.mgd.use_4addr = params->use_4addr; + } + + ret = register_netdevice(ndev); + if (ret) + goto fail; + + mutex_lock(&local->iflist_mtx); + list_add_tail_rcu(&sdata->list, &local->interfaces); + mutex_unlock(&local->iflist_mtx); + + if (new_dev) + *new_dev = ndev; + + return 0; + + fail: + free_netdev(ndev); + return ret; +} + +void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata) +{ + ASSERT_RTNL(); + + mutex_lock(&sdata->local->iflist_mtx); + list_del_rcu(&sdata->list); + mutex_unlock(&sdata->local->iflist_mtx); + + synchronize_rcu(); + unregister_netdevice(sdata->dev); +} + +/* + * Remove all interfaces, may only be called at hardware unregistration + * time because it doesn't do RCU-safe list removals. + */ +void ieee80211_remove_interfaces(struct ieee80211_local *local) +{ + struct ieee80211_sub_if_data *sdata, *tmp; + LIST_HEAD(unreg_list); + + ASSERT_RTNL(); + + mutex_lock(&local->iflist_mtx); + list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) { + list_del(&sdata->list); + + unregister_netdevice_queue(sdata->dev, &unreg_list); + } + mutex_unlock(&local->iflist_mtx); + unregister_netdevice_many(&unreg_list); + list_del(&unreg_list); +} + +static u32 ieee80211_idle_off(struct ieee80211_local *local, + const char *reason) +{ + if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE)) + return 0; + +#ifdef CONFIG_MAC80211_VERBOSE_DEBUG + wiphy_debug(local->hw.wiphy, "device no longer idle - %s\n", reason); +#endif + + local->hw.conf.flags &= ~IEEE80211_CONF_IDLE; + return IEEE80211_CONF_CHANGE_IDLE; +} + +static u32 ieee80211_idle_on(struct ieee80211_local *local) +{ + if (local->hw.conf.flags & IEEE80211_CONF_IDLE) + return 0; + +#ifdef CONFIG_MAC80211_VERBOSE_DEBUG + wiphy_debug(local->hw.wiphy, "device now idle\n"); +#endif + + drv_flush(local, false); + + local->hw.conf.flags |= IEEE80211_CONF_IDLE; + return IEEE80211_CONF_CHANGE_IDLE; +} + +u32 __ieee80211_recalc_idle(struct ieee80211_local *local) +{ + struct ieee80211_sub_if_data *sdata; + int count = 0; + bool working = false, scanning = false, hw_roc = false; + struct ieee80211_work *wk; + unsigned int led_trig_start = 0, led_trig_stop = 0; + +#ifdef CONFIG_PROVE_LOCKING + WARN_ON(debug_locks && !lockdep_rtnl_is_held() && + !lockdep_is_held(&local->iflist_mtx)); +#endif + lockdep_assert_held(&local->mtx); + + list_for_each_entry(sdata, &local->interfaces, list) { + if (!ieee80211_sdata_running(sdata)) { + sdata->vif.bss_conf.idle = true; + continue; + } + + sdata->old_idle = sdata->vif.bss_conf.idle; + + /* do not count disabled managed interfaces */ + if (sdata->vif.type == NL80211_IFTYPE_STATION && + !sdata->u.mgd.associated) { + sdata->vif.bss_conf.idle = true; + continue; + } + /* do not count unused IBSS interfaces */ + if (sdata->vif.type == NL80211_IFTYPE_ADHOC && + !sdata->u.ibss.ssid_len) { + sdata->vif.bss_conf.idle = true; + continue; + } + /* count everything else */ + count++; + } + + list_for_each_entry(wk, &local->work_list, list) { + working = true; + wk->sdata->vif.bss_conf.idle = false; + } + + if (local->scan_sdata) { + scanning = true; + local->scan_sdata->vif.bss_conf.idle = false; + } + + if (local->hw_roc_channel) + hw_roc = true; + + list_for_each_entry(sdata, &local->interfaces, list) { + if (sdata->old_idle == sdata->vif.bss_conf.idle) + continue; + if (!ieee80211_sdata_running(sdata)) + continue; + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); + } + + if (working || scanning || hw_roc) + led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK; + else + led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK; + + if (count) + led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED; + else + led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED; + + ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop); + + if (hw_roc) + return ieee80211_idle_off(local, "hw remain-on-channel"); + if (working) + return ieee80211_idle_off(local, "working"); + if (scanning) + return ieee80211_idle_off(local, "scanning"); + if (!count) + return ieee80211_idle_on(local); + else + return ieee80211_idle_off(local, "in use"); + + return 0; +} + +void ieee80211_recalc_idle(struct ieee80211_local *local) +{ + u32 chg; + + mutex_lock(&local->iflist_mtx); + chg = __ieee80211_recalc_idle(local); + mutex_unlock(&local->iflist_mtx); + if (chg) + ieee80211_hw_config(local, chg); +} + +static int netdev_notify(struct notifier_block *nb, + unsigned long state, + void *ndev) +{ + struct net_device *dev = ndev; + struct ieee80211_sub_if_data *sdata; + + if (state != NETDEV_CHANGENAME) + return 0; + + if (!dev->ieee80211_ptr || !dev->ieee80211_ptr->wiphy) + return 0; + + if (dev->ieee80211_ptr->wiphy->privid != mac80211_wiphy_privid) + return 0; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + memcpy(sdata->name, dev->name, IFNAMSIZ); + + ieee80211_debugfs_rename_netdev(sdata); + return 0; +} + +static struct notifier_block mac80211_netdev_notifier = { + .notifier_call = netdev_notify, +}; + +int ieee80211_iface_init(void) +{ + return register_netdevice_notifier(&mac80211_netdev_notifier); +} + +void ieee80211_iface_exit(void) +{ + unregister_netdevice_notifier(&mac80211_netdev_notifier); +} |