diff options
Diffstat (limited to 'include/rdma/rdma_cm.h')
| -rw-r--r-- | include/rdma/rdma_cm.h | 359 |
1 files changed, 359 insertions, 0 deletions
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h new file mode 100644 index 00000000..26977c14 --- /dev/null +++ b/include/rdma/rdma_cm.h @@ -0,0 +1,359 @@ +/* + * Copyright (c) 2005 Voltaire Inc. All rights reserved. + * Copyright (c) 2005 Intel Corporation. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#if !defined(RDMA_CM_H) +#define RDMA_CM_H + +#include <linux/socket.h> +#include <linux/in6.h> +#include <rdma/ib_addr.h> +#include <rdma/ib_sa.h> + +/* + * Upon receiving a device removal event, users must destroy the associated + * RDMA identifier and release all resources allocated with the device. + */ +enum rdma_cm_event_type { + RDMA_CM_EVENT_ADDR_RESOLVED, + RDMA_CM_EVENT_ADDR_ERROR, + RDMA_CM_EVENT_ROUTE_RESOLVED, + RDMA_CM_EVENT_ROUTE_ERROR, + RDMA_CM_EVENT_CONNECT_REQUEST, + RDMA_CM_EVENT_CONNECT_RESPONSE, + RDMA_CM_EVENT_CONNECT_ERROR, + RDMA_CM_EVENT_UNREACHABLE, + RDMA_CM_EVENT_REJECTED, + RDMA_CM_EVENT_ESTABLISHED, + RDMA_CM_EVENT_DISCONNECTED, + RDMA_CM_EVENT_DEVICE_REMOVAL, + RDMA_CM_EVENT_MULTICAST_JOIN, + RDMA_CM_EVENT_MULTICAST_ERROR, + RDMA_CM_EVENT_ADDR_CHANGE, + RDMA_CM_EVENT_TIMEWAIT_EXIT +}; + +enum rdma_port_space { + RDMA_PS_SDP = 0x0001, + RDMA_PS_IPOIB = 0x0002, + RDMA_PS_TCP = 0x0106, + RDMA_PS_UDP = 0x0111, +}; + +struct rdma_addr { + struct sockaddr_storage src_addr; + struct sockaddr_storage dst_addr; + struct rdma_dev_addr dev_addr; +}; + +struct rdma_route { + struct rdma_addr addr; + struct ib_sa_path_rec *path_rec; + int num_paths; +}; + +struct rdma_conn_param { + const void *private_data; + u8 private_data_len; + u8 responder_resources; + u8 initiator_depth; + u8 flow_control; + u8 retry_count; /* ignored when accepting */ + u8 rnr_retry_count; + /* Fields below ignored if a QP is created on the rdma_cm_id. */ + u8 srq; + u32 qp_num; +}; + +struct rdma_ud_param { + const void *private_data; + u8 private_data_len; + struct ib_ah_attr ah_attr; + u32 qp_num; + u32 qkey; +}; + +struct rdma_cm_event { + enum rdma_cm_event_type event; + int status; + union { + struct rdma_conn_param conn; + struct rdma_ud_param ud; + } param; +}; + +enum rdma_cm_state { + RDMA_CM_IDLE, + RDMA_CM_ADDR_QUERY, + RDMA_CM_ADDR_RESOLVED, + RDMA_CM_ROUTE_QUERY, + RDMA_CM_ROUTE_RESOLVED, + RDMA_CM_CONNECT, + RDMA_CM_DISCONNECT, + RDMA_CM_ADDR_BOUND, + RDMA_CM_LISTEN, + RDMA_CM_DEVICE_REMOVAL, + RDMA_CM_DESTROYING +}; + +struct rdma_cm_id; + +/** + * rdma_cm_event_handler - Callback used to report user events. + * + * Notes: Users may not call rdma_destroy_id from this callback to destroy + * the passed in id, or a corresponding listen id. Returning a + * non-zero value from the callback will destroy the passed in id. + */ +typedef int (*rdma_cm_event_handler)(struct rdma_cm_id *id, + struct rdma_cm_event *event); + +struct rdma_cm_id { + struct ib_device *device; + void *context; + struct ib_qp *qp; + rdma_cm_event_handler event_handler; + struct rdma_route route; + enum rdma_port_space ps; + enum ib_qp_type qp_type; + u8 port_num; +}; + +/** + * rdma_create_id - Create an RDMA identifier. + * + * @event_handler: User callback invoked to report events associated with the + * returned rdma_id. + * @context: User specified context associated with the id. + * @ps: RDMA port space. + * @qp_type: type of queue pair associated with the id. + */ +struct rdma_cm_id *rdma_create_id(rdma_cm_event_handler event_handler, + void *context, enum rdma_port_space ps, + enum ib_qp_type qp_type); + +/** + * rdma_destroy_id - Destroys an RDMA identifier. + * + * @id: RDMA identifier. + * + * Note: calling this function has the effect of canceling in-flight + * asynchronous operations associated with the id. + */ +void rdma_destroy_id(struct rdma_cm_id *id); + +/** + * rdma_bind_addr - Bind an RDMA identifier to a source address and + * associated RDMA device, if needed. + * + * @id: RDMA identifier. + * @addr: Local address information. Wildcard values are permitted. + * + * This associates a source address with the RDMA identifier before calling + * rdma_listen. If a specific local address is given, the RDMA identifier will + * be bound to a local RDMA device. + */ +int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr); + +/** + * rdma_resolve_addr - Resolve destination and optional source addresses + * from IP addresses to an RDMA address. If successful, the specified + * rdma_cm_id will be bound to a local device. + * + * @id: RDMA identifier. + * @src_addr: Source address information. This parameter may be NULL. + * @dst_addr: Destination address information. + * @timeout_ms: Time to wait for resolution to complete. + */ +int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr, + struct sockaddr *dst_addr, int timeout_ms); + +/** + * rdma_resolve_route - Resolve the RDMA address bound to the RDMA identifier + * into route information needed to establish a connection. + * + * This is called on the client side of a connection. + * Users must have first called rdma_resolve_addr to resolve a dst_addr + * into an RDMA address before calling this routine. + */ +int rdma_resolve_route(struct rdma_cm_id *id, int timeout_ms); + +/** + * rdma_create_qp - Allocate a QP and associate it with the specified RDMA + * identifier. + * + * QPs allocated to an rdma_cm_id will automatically be transitioned by the CMA + * through their states. + */ +int rdma_create_qp(struct rdma_cm_id *id, struct ib_pd *pd, + struct ib_qp_init_attr *qp_init_attr); + +/** + * rdma_destroy_qp - Deallocate the QP associated with the specified RDMA + * identifier. + * + * Users must destroy any QP associated with an RDMA identifier before + * destroying the RDMA ID. + */ +void rdma_destroy_qp(struct rdma_cm_id *id); + +/** + * rdma_init_qp_attr - Initializes the QP attributes for use in transitioning + * to a specified QP state. + * @id: Communication identifier associated with the QP attributes to + * initialize. + * @qp_attr: On input, specifies the desired QP state. On output, the + * mandatory and desired optional attributes will be set in order to + * modify the QP to the specified state. + * @qp_attr_mask: The QP attribute mask that may be used to transition the + * QP to the specified state. + * + * Users must set the @qp_attr->qp_state to the desired QP state. This call + * will set all required attributes for the given transition, along with + * known optional attributes. Users may override the attributes returned from + * this call before calling ib_modify_qp. + * + * Users that wish to have their QP automatically transitioned through its + * states can associate a QP with the rdma_cm_id by calling rdma_create_qp(). + */ +int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr, + int *qp_attr_mask); + +/** + * rdma_connect - Initiate an active connection request. + * @id: Connection identifier to connect. + * @conn_param: Connection information used for connected QPs. + * + * Users must have resolved a route for the rdma_cm_id to connect with + * by having called rdma_resolve_route before calling this routine. + * + * This call will either connect to a remote QP or obtain remote QP + * information for unconnected rdma_cm_id's. The actual operation is + * based on the rdma_cm_id's port space. + */ +int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); + +/** + * rdma_listen - This function is called by the passive side to + * listen for incoming connection requests. + * + * Users must have bound the rdma_cm_id to a local address by calling + * rdma_bind_addr before calling this routine. + */ +int rdma_listen(struct rdma_cm_id *id, int backlog); + +/** + * rdma_accept - Called to accept a connection request or response. + * @id: Connection identifier associated with the request. + * @conn_param: Information needed to establish the connection. This must be + * provided if accepting a connection request. If accepting a connection + * response, this parameter must be NULL. + * + * Typically, this routine is only called by the listener to accept a connection + * request. It must also be called on the active side of a connection if the + * user is performing their own QP transitions. + * + * In the case of error, a reject message is sent to the remote side and the + * state of the qp associated with the id is modified to error, such that any + * previously posted receive buffers would be flushed. + */ +int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); + +/** + * rdma_notify - Notifies the RDMA CM of an asynchronous event that has + * occurred on the connection. + * @id: Connection identifier to transition to established. + * @event: Asynchronous event. + * + * This routine should be invoked by users to notify the CM of relevant + * communication events. Events that should be reported to the CM and + * when to report them are: + * + * IB_EVENT_COMM_EST - Used when a message is received on a connected + * QP before an RTU has been received. + */ +int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event); + +/** + * rdma_reject - Called to reject a connection request or response. + */ +int rdma_reject(struct rdma_cm_id *id, const void *private_data, + u8 private_data_len); + +/** + * rdma_disconnect - This function disconnects the associated QP and + * transitions it into the error state. + */ +int rdma_disconnect(struct rdma_cm_id *id); + +/** + * rdma_join_multicast - Join the multicast group specified by the given + * address. + * @id: Communication identifier associated with the request. + * @addr: Multicast address identifying the group to join. + * @context: User-defined context associated with the join request, returned + * to the user through the private_data pointer in multicast events. + */ +int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr, + void *context); + +/** + * rdma_leave_multicast - Leave the multicast group specified by the given + * address. + */ +void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr); + +/** + * rdma_set_service_type - Set the type of service associated with a + * connection identifier. + * @id: Communication identifier to associated with service type. + * @tos: Type of service. + * + * The type of service is interpretted as a differentiated service + * field (RFC 2474). The service type should be specified before + * performing route resolution, as existing communication on the + * connection identifier may be unaffected. The type of service + * requested may not be supported by the network to all destinations. + */ +void rdma_set_service_type(struct rdma_cm_id *id, int tos); + +/** + * rdma_set_reuseaddr - Allow the reuse of local addresses when binding + * the rdma_cm_id. + * @id: Communication identifier to configure. + * @reuse: Value indicating if the bound address is reusable. + * + * Reuse must be set before an address is bound to the id. + */ +int rdma_set_reuseaddr(struct rdma_cm_id *id, int reuse); + +#endif /* RDMA_CM_H */ |