diff options
Diffstat (limited to 'include/linux/usb/serial.h')
| -rw-r--r-- | include/linux/usb/serial.h | 388 |
1 files changed, 388 insertions, 0 deletions
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h new file mode 100644 index 00000000..b29f70b2 --- /dev/null +++ b/include/linux/usb/serial.h @@ -0,0 +1,388 @@ +/* + * USB Serial Converter stuff + * + * Copyright (C) 1999 - 2005 + * Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + */ + +#ifndef __LINUX_USB_SERIAL_H +#define __LINUX_USB_SERIAL_H + +#include <linux/kref.h> +#include <linux/mutex.h> +#include <linux/sysrq.h> +#include <linux/kfifo.h> + +#define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ +#define SERIAL_TTY_MINORS 254 /* loads of devices :) */ +#define SERIAL_TTY_NO_MINOR 255 /* No minor was assigned */ + +/* The maximum number of ports one device can grab at once */ +#define MAX_NUM_PORTS 8 + +/* parity check flag */ +#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + +enum port_dev_state { + PORT_UNREGISTERED, + PORT_REGISTERING, + PORT_REGISTERED, + PORT_UNREGISTERING, +}; + +/* USB serial flags */ +#define USB_SERIAL_WRITE_BUSY 0 + +/** + * usb_serial_port: structure for the specific ports of a device. + * @serial: pointer back to the struct usb_serial owner of this port. + * @port: pointer to the corresponding tty_port for this port. + * @lock: spinlock to grab when updating portions of this structure. + * @number: the number of the port (the minor number). + * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. + * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. + * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe + * for this port. + * @interrupt_out_buffer: pointer to the interrupt out buffer for this port. + * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes. + * @interrupt_out_urb: pointer to the interrupt out struct urb for this port. + * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe + * for this port. + * @bulk_in_buffer: pointer to the bulk in buffer for this port. + * @bulk_in_size: the size of the bulk_in_buffer, in bytes. + * @read_urb: pointer to the bulk in struct urb for this port. + * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this + * port. + * @bulk_out_buffer: pointer to the bulk out buffer for this port. + * @bulk_out_size: the size of the bulk_out_buffer, in bytes. + * @write_urb: pointer to the bulk out struct urb for this port. + * @write_fifo: kfifo used to buffer outgoing data + * @write_urb_busy: port`s writing status + * @bulk_out_buffers: pointers to the bulk out buffers for this port + * @write_urbs: pointers to the bulk out urbs for this port + * @write_urbs_free: status bitmap the for bulk out urbs + * @tx_bytes: number of bytes currently in host stack queues + * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this + * port. + * @flags: usb serial port flags + * @write_wait: a wait_queue_head_t used by the port. + * @work: work queue entry for the line discipline waking up. + * @throttled: nonzero if the read urb is inactive to throttle the device + * @throttle_req: nonzero if the tty wants to throttle us + * @dev: pointer to the serial device + * + * This structure is used by the usb-serial core and drivers for the specific + * ports of a device. + */ +struct usb_serial_port { + struct usb_serial *serial; + struct tty_port port; + spinlock_t lock; + unsigned char number; + + unsigned char *interrupt_in_buffer; + struct urb *interrupt_in_urb; + __u8 interrupt_in_endpointAddress; + + unsigned char *interrupt_out_buffer; + int interrupt_out_size; + struct urb *interrupt_out_urb; + __u8 interrupt_out_endpointAddress; + + unsigned char *bulk_in_buffer; + int bulk_in_size; + struct urb *read_urb; + __u8 bulk_in_endpointAddress; + + unsigned char *bulk_out_buffer; + int bulk_out_size; + struct urb *write_urb; + struct kfifo write_fifo; + int write_urb_busy; + + unsigned char *bulk_out_buffers[2]; + struct urb *write_urbs[2]; + unsigned long write_urbs_free; + __u8 bulk_out_endpointAddress; + + int tx_bytes; + + unsigned long flags; + wait_queue_head_t write_wait; + struct work_struct work; + char throttled; + char throttle_req; + unsigned long sysrq; /* sysrq timeout */ + struct device dev; + enum port_dev_state dev_state; +}; +#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) + +/* get and set the port private data pointer helper functions */ +static inline void *usb_get_serial_port_data(struct usb_serial_port *port) +{ + return dev_get_drvdata(&port->dev); +} + +static inline void usb_set_serial_port_data(struct usb_serial_port *port, + void *data) +{ + dev_set_drvdata(&port->dev, data); +} + +/** + * usb_serial - structure used by the usb-serial core for a device + * @dev: pointer to the struct usb_device for this device + * @type: pointer to the struct usb_serial_driver for this device + * @interface: pointer to the struct usb_interface for this device + * @minor: the starting minor number for this device + * @num_ports: the number of ports this device has + * @num_interrupt_in: number of interrupt in endpoints we have + * @num_interrupt_out: number of interrupt out endpoints we have + * @num_bulk_in: number of bulk in endpoints we have + * @num_bulk_out: number of bulk out endpoints we have + * @port: array of struct usb_serial_port structures for the different ports. + * @private: place to put any driver specific information that is needed. The + * usb-serial driver is required to manage this data, the usb-serial core + * will not touch this. Use usb_get_serial_data() and + * usb_set_serial_data() to access this. + */ +struct usb_serial { + struct usb_device *dev; + struct usb_serial_driver *type; + struct usb_interface *interface; + unsigned char disconnected:1; + unsigned char suspending:1; + unsigned char attached:1; + unsigned char minor; + unsigned char num_ports; + unsigned char num_port_pointers; + char num_interrupt_in; + char num_interrupt_out; + char num_bulk_in; + char num_bulk_out; + struct usb_serial_port *port[MAX_NUM_PORTS]; + struct kref kref; + struct mutex disc_mutex; + void *private; +}; +#define to_usb_serial(d) container_of(d, struct usb_serial, kref) + +/* get and set the serial private data pointer helper functions */ +static inline void *usb_get_serial_data(struct usb_serial *serial) +{ + return serial->private; +} + +static inline void usb_set_serial_data(struct usb_serial *serial, void *data) +{ + serial->private = data; +} + +/** + * usb_serial_driver - describes a usb serial driver + * @description: pointer to a string that describes this driver. This string + * used in the syslog messages when a device is inserted or removed. + * @id_table: pointer to a list of usb_device_id structures that define all + * of the devices this structure can support. + * @num_ports: the number of different ports this device will have. + * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer + * (0 = end-point size) + * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size) + * @calc_num_ports: pointer to a function to determine how many ports this + * device has dynamically. It will be called after the probe() + * callback is called, but before attach() + * @probe: pointer to the driver's probe function. + * This will be called when the device is inserted into the system, + * but before the device has been fully initialized by the usb_serial + * subsystem. Use this function to download any firmware to the device, + * or any other early initialization that might be needed. + * Return 0 to continue on with the initialization sequence. Anything + * else will abort it. + * @attach: pointer to the driver's attach function. + * This will be called when the struct usb_serial structure is fully set + * set up. Do any local initialization of the device, or any private + * memory structure allocation at this point in time. + * @disconnect: pointer to the driver's disconnect function. This will be + * called when the device is unplugged or unbound from the driver. + * @release: pointer to the driver's release function. This will be called + * when the usb_serial data structure is about to be destroyed. + * @usb_driver: pointer to the struct usb_driver that controls this + * device. This is necessary to allow dynamic ids to be added to + * the driver from sysfs. + * + * This structure is defines a USB Serial driver. It provides all of + * the information that the USB serial core code needs. If the function + * pointers are defined, then the USB serial core code will call them when + * the corresponding tty port functions are called. If they are not + * called, the generic serial function will be used instead. + * + * The driver.owner field should be set to the module owner of this driver. + * The driver.name field should be set to the name of this driver (remember + * it will show up in sysfs, so it needs to be short and to the point. + * Using the module name is a good idea.) + */ +struct usb_serial_driver { + const char *description; + const struct usb_device_id *id_table; + char num_ports; + + struct list_head driver_list; + struct device_driver driver; + struct usb_driver *usb_driver; + struct usb_dynids dynids; + + size_t bulk_in_size; + size_t bulk_out_size; + + int (*probe)(struct usb_serial *serial, const struct usb_device_id *id); + int (*attach)(struct usb_serial *serial); + int (*calc_num_ports) (struct usb_serial *serial); + + void (*disconnect)(struct usb_serial *serial); + void (*release)(struct usb_serial *serial); + + int (*port_probe)(struct usb_serial_port *port); + int (*port_remove)(struct usb_serial_port *port); + + int (*suspend)(struct usb_serial *serial, pm_message_t message); + int (*resume)(struct usb_serial *serial); + + /* serial function calls */ + /* Called by console and by the tty layer */ + int (*open)(struct tty_struct *tty, struct usb_serial_port *port); + void (*close)(struct usb_serial_port *port); + int (*write)(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); + /* Called only by the tty layer */ + int (*write_room)(struct tty_struct *tty); + int (*ioctl)(struct tty_struct *tty, + unsigned int cmd, unsigned long arg); + void (*set_termios)(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); + void (*break_ctl)(struct tty_struct *tty, int break_state); + int (*chars_in_buffer)(struct tty_struct *tty); + void (*throttle)(struct tty_struct *tty); + void (*unthrottle)(struct tty_struct *tty); + int (*tiocmget)(struct tty_struct *tty); + int (*tiocmset)(struct tty_struct *tty, + unsigned int set, unsigned int clear); + int (*get_icount)(struct tty_struct *tty, + struct serial_icounter_struct *icount); + /* Called by the tty layer for port level work. There may or may not + be an attached tty at this point */ + void (*dtr_rts)(struct usb_serial_port *port, int on); + int (*carrier_raised)(struct usb_serial_port *port); + /* Called by the usb serial hooks to allow the user to rework the + termios state */ + void (*init_termios)(struct tty_struct *tty); + /* USB events */ + void (*read_int_callback)(struct urb *urb); + void (*write_int_callback)(struct urb *urb); + void (*read_bulk_callback)(struct urb *urb); + void (*write_bulk_callback)(struct urb *urb); + /* Called by the generic read bulk callback */ + void (*process_read_urb)(struct urb *urb); + /* Called by the generic write implementation */ + int (*prepare_write_buffer)(struct usb_serial_port *port, + void *dest, size_t size); +}; +#define to_usb_serial_driver(d) \ + container_of(d, struct usb_serial_driver, driver) + +extern int usb_serial_register(struct usb_serial_driver *driver); +extern void usb_serial_deregister(struct usb_serial_driver *driver); +extern void usb_serial_port_softint(struct usb_serial_port *port); + +extern int usb_serial_probe(struct usb_interface *iface, + const struct usb_device_id *id); +extern void usb_serial_disconnect(struct usb_interface *iface); + +extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message); +extern int usb_serial_resume(struct usb_interface *intf); + +extern int ezusb_writememory(struct usb_serial *serial, int address, + unsigned char *data, int length, __u8 bRequest); +extern int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit); + +/* USB Serial console functions */ +#ifdef CONFIG_USB_SERIAL_CONSOLE +extern void usb_serial_console_init(int debug, int minor); +extern void usb_serial_console_exit(void); +extern void usb_serial_console_disconnect(struct usb_serial *serial); +#else +static inline void usb_serial_console_init(int debug, int minor) { } +static inline void usb_serial_console_exit(void) { } +static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} +#endif + +/* Functions needed by other parts of the usbserial core */ +extern struct usb_serial *usb_serial_get_by_index(unsigned int minor); +extern void usb_serial_put(struct usb_serial *serial); +extern int usb_serial_generic_open(struct tty_struct *tty, + struct usb_serial_port *port); +extern int usb_serial_generic_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count); +extern void usb_serial_generic_close(struct usb_serial_port *port); +extern int usb_serial_generic_resume(struct usb_serial *serial); +extern int usb_serial_generic_write_room(struct tty_struct *tty); +extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); +extern void usb_serial_generic_read_bulk_callback(struct urb *urb); +extern void usb_serial_generic_write_bulk_callback(struct urb *urb); +extern void usb_serial_generic_throttle(struct tty_struct *tty); +extern void usb_serial_generic_unthrottle(struct tty_struct *tty); +extern void usb_serial_generic_disconnect(struct usb_serial *serial); +extern void usb_serial_generic_release(struct usb_serial *serial); +extern int usb_serial_generic_register(int debug); +extern void usb_serial_generic_deregister(void); +extern int usb_serial_generic_submit_read_urb(struct usb_serial_port *port, + gfp_t mem_flags); +extern void usb_serial_generic_process_read_urb(struct urb *urb); +extern int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port, + void *dest, size_t size); +extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port, + unsigned int ch); +extern int usb_serial_handle_break(struct usb_serial_port *port); +extern void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, + struct tty_struct *tty, + unsigned int status); + + +extern int usb_serial_bus_register(struct usb_serial_driver *device); +extern void usb_serial_bus_deregister(struct usb_serial_driver *device); + +extern struct usb_serial_driver usb_serial_generic_device; +extern struct bus_type usb_serial_bus_type; +extern struct tty_driver *usb_serial_tty_driver; + +static inline void usb_serial_debug_data(int debug, + struct device *dev, + const char *function, int size, + const unsigned char *data) +{ + int i; + + if (debug) { + dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", + function, size); + for (i = 0; i < size; ++i) + printk("%.2x ", data[i]); + printk("\n"); + } +} + +/* Use our own dbg macro */ +#undef dbg +#define dbg(format, arg...) \ +do { \ + if (debug) \ + printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ +} while (0) + +#endif /* __LINUX_USB_SERIAL_H */ + |