aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/usb/hcd.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/usb/hcd.h')
-rw-r--r--include/linux/usb/hcd.h676
1 files changed, 676 insertions, 0 deletions
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
new file mode 100644
index 00000000..32ba8c55
--- /dev/null
+++ b/include/linux/usb/hcd.h
@@ -0,0 +1,676 @@
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __USB_CORE_HCD_H
+#define __USB_CORE_HCD_H
+
+#ifdef __KERNEL__
+
+#include <linux/rwsem.h>
+
+#define MAX_TOPO_LEVEL 6
+
+/* This file contains declarations of usbcore internals that are mostly
+ * used or exposed by Host Controller Drivers.
+ */
+
+/*
+ * USB Packet IDs (PIDs)
+ */
+#define USB_PID_EXT 0xf0 /* USB 2.0 LPM ECN */
+#define USB_PID_OUT 0xe1
+#define USB_PID_ACK 0xd2
+#define USB_PID_DATA0 0xc3
+#define USB_PID_PING 0xb4 /* USB 2.0 */
+#define USB_PID_SOF 0xa5
+#define USB_PID_NYET 0x96 /* USB 2.0 */
+#define USB_PID_DATA2 0x87 /* USB 2.0 */
+#define USB_PID_SPLIT 0x78 /* USB 2.0 */
+#define USB_PID_IN 0x69
+#define USB_PID_NAK 0x5a
+#define USB_PID_DATA1 0x4b
+#define USB_PID_PREAMBLE 0x3c /* Token mode */
+#define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */
+#define USB_PID_SETUP 0x2d
+#define USB_PID_STALL 0x1e
+#define USB_PID_MDATA 0x0f /* USB 2.0 */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * USB Host Controller Driver (usb_hcd) framework
+ *
+ * Since "struct usb_bus" is so thin, you can't share much code in it.
+ * This framework is a layer over that, and should be more sharable.
+ *
+ * @authorized_default: Specifies if new devices are authorized to
+ * connect by default or they require explicit
+ * user space authorization; this bit is settable
+ * through /sys/class/usb_host/X/authorized_default.
+ * For the rest is RO, so we don't lock to r/w it.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+struct usb_hcd {
+
+ /*
+ * housekeeping
+ */
+ struct usb_bus self; /* hcd is-a bus */
+ struct kref kref; /* reference counter */
+
+ const char *product_desc; /* product/vendor string */
+ int speed; /* Speed for this roothub.
+ * May be different from
+ * hcd->driver->flags & HCD_MASK
+ */
+ char irq_descr[24]; /* driver + bus # */
+
+ struct timer_list rh_timer; /* drives root-hub polling */
+ struct urb *status_urb; /* the current status urb */
+#ifdef CONFIG_USB_SUSPEND
+ struct work_struct wakeup_work; /* for remote wakeup */
+#endif
+
+ /*
+ * hardware info/state
+ */
+ const struct hc_driver *driver; /* hw-specific hooks */
+
+ /* Flags that need to be manipulated atomically because they can
+ * change while the host controller is running. Always use
+ * set_bit() or clear_bit() to change their values.
+ */
+ unsigned long flags;
+#define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */
+#define HCD_FLAG_SAW_IRQ 1
+#define HCD_FLAG_POLL_RH 2 /* poll for rh status? */
+#define HCD_FLAG_POLL_PENDING 3 /* status has changed? */
+#define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */
+#define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */
+#define HCD_FLAG_DEAD 6 /* controller has died? */
+
+ /* The flags can be tested using these macros; they are likely to
+ * be slightly faster than test_bit().
+ */
+#define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
+#define HCD_SAW_IRQ(hcd) ((hcd)->flags & (1U << HCD_FLAG_SAW_IRQ))
+#define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
+#define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
+#define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
+#define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
+#define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD))
+
+ /* Flags that get set only during HCD registration or removal. */
+ unsigned rh_registered:1;/* is root hub registered? */
+ unsigned rh_pollable:1; /* may we poll the root hub? */
+ unsigned msix_enabled:1; /* driver has MSI-X enabled? */
+
+ /* The next flag is a stopgap, to be removed when all the HCDs
+ * support the new root-hub polling mechanism. */
+ unsigned uses_new_polling:1;
+ unsigned wireless:1; /* Wireless USB HCD */
+ unsigned authorized_default:1;
+ unsigned has_tt:1; /* Integrated TT in root hub */
+ unsigned broken_pci_sleep:1; /* Don't put the
+ controller in PCI-D3 for system sleep */
+
+ int irq; /* irq allocated */
+ void __iomem *regs; /* device memory/io */
+ u64 rsrc_start; /* memory/io resource start */
+ u64 rsrc_len; /* memory/io resource length */
+ unsigned power_budget; /* in mA, 0 = no limit */
+
+ /* bandwidth_mutex should be taken before adding or removing
+ * any new bus bandwidth constraints:
+ * 1. Before adding a configuration for a new device.
+ * 2. Before removing the configuration to put the device into
+ * the addressed state.
+ * 3. Before selecting a different configuration.
+ * 4. Before selecting an alternate interface setting.
+ *
+ * bandwidth_mutex should be dropped after a successful control message
+ * to the device, or resetting the bandwidth after a failed attempt.
+ */
+ struct mutex *bandwidth_mutex;
+ struct usb_hcd *shared_hcd;
+ struct usb_hcd *primary_hcd;
+
+
+#define HCD_BUFFER_POOLS 4
+ struct dma_pool *pool[HCD_BUFFER_POOLS];
+
+ int state;
+# define __ACTIVE 0x01
+# define __SUSPEND 0x04
+# define __TRANSIENT 0x80
+
+# define HC_STATE_HALT 0
+# define HC_STATE_RUNNING (__ACTIVE)
+# define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE)
+# define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT)
+# define HC_STATE_SUSPENDED (__SUSPEND)
+
+#define HC_IS_RUNNING(state) ((state) & __ACTIVE)
+#define HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
+
+ /* more shared queuing code would be good; it should support
+ * smarter scheduling, handle transaction translators, etc;
+ * input size of periodic table to an interrupt scheduler.
+ * (ohci 32, uhci 1024, ehci 256/512/1024).
+ */
+
+ /* The HC driver's private data is stored at the end of
+ * this structure.
+ */
+ unsigned long hcd_priv[0]
+ __attribute__ ((aligned(sizeof(s64))));
+};
+
+/* 2.4 does this a bit differently ... */
+static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
+{
+ return &hcd->self;
+}
+
+static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
+{
+ return container_of(bus, struct usb_hcd, self);
+}
+
+struct hcd_timeout { /* timeouts we allocate */
+ struct list_head timeout_list;
+ struct timer_list timer;
+};
+
+/*-------------------------------------------------------------------------*/
+
+
+struct hc_driver {
+ const char *description; /* "ehci-hcd" etc */
+ const char *product_desc; /* product/vendor string */
+ size_t hcd_priv_size; /* size of private data */
+
+ /* irq handler */
+ irqreturn_t (*irq) (struct usb_hcd *hcd);
+
+ int flags;
+#define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
+#define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */
+#define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */
+#define HCD_USB11 0x0010 /* USB 1.1 */
+#define HCD_USB2 0x0020 /* USB 2.0 */
+#define HCD_USB3 0x0040 /* USB 3.0 */
+#define HCD_MASK 0x0070
+
+ /* called to init HCD and root hub */
+ int (*reset) (struct usb_hcd *hcd);
+ int (*start) (struct usb_hcd *hcd);
+
+ /* NOTE: these suspend/resume calls relate to the HC as
+ * a whole, not just the root hub; they're for PCI bus glue.
+ */
+ /* called after suspending the hub, before entering D3 etc */
+ int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
+
+ /* called after entering D0 (etc), before resuming the hub */
+ int (*pci_resume)(struct usb_hcd *hcd, bool hibernated);
+
+ /* cleanly make HCD stop writing memory and doing I/O */
+ void (*stop) (struct usb_hcd *hcd);
+
+ /* shutdown HCD */
+ void (*shutdown) (struct usb_hcd *hcd);
+
+ /* return current frame number */
+ int (*get_frame_number) (struct usb_hcd *hcd);
+
+ /* manage i/o requests, device state */
+ int (*urb_enqueue)(struct usb_hcd *hcd,
+ struct urb *urb, gfp_t mem_flags);
+ int (*urb_dequeue)(struct usb_hcd *hcd,
+ struct urb *urb, int status);
+
+ /*
+ * (optional) these hooks allow an HCD to override the default DMA
+ * mapping and unmapping routines. In general, they shouldn't be
+ * necessary unless the host controller has special DMA requirements,
+ * such as alignment contraints. If these are not specified, the
+ * general usb_hcd_(un)?map_urb_for_dma functions will be used instead
+ * (and it may be a good idea to call these functions in your HCD
+ * implementation)
+ */
+ int (*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags);
+ void (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb);
+
+ /* hw synch, freeing endpoint resources that urb_dequeue can't */
+ void (*endpoint_disable)(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep);
+
+ /* (optional) reset any endpoint state such as sequence number
+ and current window */
+ void (*endpoint_reset)(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep);
+
+ /* root hub support */
+ int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
+ int (*hub_control) (struct usb_hcd *hcd,
+ u16 typeReq, u16 wValue, u16 wIndex,
+ char *buf, u16 wLength);
+ int (*bus_suspend)(struct usb_hcd *);
+ int (*bus_resume)(struct usb_hcd *);
+ int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
+
+ /* force handover of high-speed port to full-speed companion */
+ void (*relinquish_port)(struct usb_hcd *, int);
+ /* has a port been handed over to a companion? */
+ int (*port_handed_over)(struct usb_hcd *, int);
+
+ /* CLEAR_TT_BUFFER completion callback */
+ void (*clear_tt_buffer_complete)(struct usb_hcd *,
+ struct usb_host_endpoint *);
+
+ /* xHCI specific functions */
+ /* Called by usb_alloc_dev to alloc HC device structures */
+ int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
+ /* Called by usb_disconnect to free HC device structures */
+ void (*free_dev)(struct usb_hcd *, struct usb_device *);
+ /* Change a group of bulk endpoints to support multiple stream IDs */
+ int (*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ unsigned int num_streams, gfp_t mem_flags);
+ /* Reverts a group of bulk endpoints back to not using stream IDs.
+ * Can fail if we run out of memory.
+ */
+ int (*free_streams)(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ gfp_t mem_flags);
+
+ /* Bandwidth computation functions */
+ /* Note that add_endpoint() can only be called once per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * drop_endpoint() can only be called once per endpoint also.
+ * A call to xhci_drop_endpoint() followed by a call to
+ * xhci_add_endpoint() will add the endpoint to the schedule with
+ * possibly new parameters denoted by a different endpoint descriptor
+ * in usb_host_endpoint. A call to xhci_add_endpoint() followed by a
+ * call to xhci_drop_endpoint() is not allowed.
+ */
+ /* Allocate endpoint resources and add them to a new schedule */
+ int (*add_endpoint)(struct usb_hcd *, struct usb_device *,
+ struct usb_host_endpoint *);
+ /* Drop an endpoint from a new schedule */
+ int (*drop_endpoint)(struct usb_hcd *, struct usb_device *,
+ struct usb_host_endpoint *);
+ /* Check that a new hardware configuration, set using
+ * endpoint_enable and endpoint_disable, does not exceed bus
+ * bandwidth. This must be called before any set configuration
+ * or set interface requests are sent to the device.
+ */
+ int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
+ /* Reset the device schedule to the last known good schedule,
+ * which was set from a previous successful call to
+ * check_bandwidth(). This reverts any add_endpoint() and
+ * drop_endpoint() calls since that last successful call.
+ * Used for when a check_bandwidth() call fails due to resource
+ * or bandwidth constraints.
+ */
+ void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
+ /* Returns the hardware-chosen device address */
+ int (*address_device)(struct usb_hcd *, struct usb_device *udev);
+ /* Notifies the HCD after a hub descriptor is fetched.
+ * Will block.
+ */
+ int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
+ struct usb_tt *tt, gfp_t mem_flags);
+ int (*reset_device)(struct usb_hcd *, struct usb_device *);
+ /* Notifies the HCD after a device is connected and its
+ * address is set
+ */
+ int (*update_device)(struct usb_hcd *, struct usb_device *);
+};
+
+extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
+extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
+ int status);
+extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
+
+extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
+extern int usb_hcd_unlink_urb(struct urb *urb, int status);
+extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
+ int status);
+extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags);
+extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
+extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
+extern void usb_hcd_flush_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep);
+extern void usb_hcd_disable_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep);
+extern void usb_hcd_reset_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep);
+extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
+extern int usb_hcd_alloc_bandwidth(struct usb_device *udev,
+ struct usb_host_config *new_config,
+ struct usb_host_interface *old_alt,
+ struct usb_host_interface *new_alt);
+extern int usb_hcd_get_frame_number(struct usb_device *udev);
+
+extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
+ struct device *dev, const char *bus_name);
+extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
+ struct device *dev, const char *bus_name,
+ struct usb_hcd *shared_hcd);
+extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
+extern void usb_put_hcd(struct usb_hcd *hcd);
+extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
+extern int usb_add_hcd(struct usb_hcd *hcd,
+ unsigned int irqnum, unsigned long irqflags);
+extern void usb_remove_hcd(struct usb_hcd *hcd);
+
+struct platform_device;
+extern void usb_hcd_platform_shutdown(struct platform_device *dev);
+
+#ifdef CONFIG_PCI
+struct pci_dev;
+struct pci_device_id;
+extern int usb_hcd_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id);
+extern void usb_hcd_pci_remove(struct pci_dev *dev);
+extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
+
+#ifdef CONFIG_PM_SLEEP
+extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
+#endif
+#endif /* CONFIG_PCI */
+
+/* pci-ish (pdev null is ok) buffer alloc/mapping support */
+int hcd_buffer_create(struct usb_hcd *hcd);
+void hcd_buffer_destroy(struct usb_hcd *hcd);
+
+void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
+ gfp_t mem_flags, dma_addr_t *dma);
+void hcd_buffer_free(struct usb_bus *bus, size_t size,
+ void *addr, dma_addr_t dma);
+
+/* generic bus glue, needed for host controllers that don't use PCI */
+extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
+
+extern void usb_hc_died(struct usb_hcd *hcd);
+extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
+
+/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
+#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
+#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
+#define usb_settoggle(dev, ep, out, bit) \
+ ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
+ ((bit) << (ep)))
+
+/* -------------------------------------------------------------------------- */
+
+/* Enumeration is only for the hub driver, or HCD virtual root hubs */
+extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
+ struct usb_bus *, unsigned port);
+extern int usb_new_device(struct usb_device *dev);
+extern void usb_disconnect(struct usb_device **);
+
+extern int usb_get_configuration(struct usb_device *dev);
+extern void usb_destroy_configuration(struct usb_device *dev);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * HCD Root Hub support
+ */
+
+#include <linux/usb/ch11.h>
+
+/*
+ * As of USB 2.0, full/low speed devices are segregated into trees.
+ * One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
+ * The other type grows from high speed hubs when they connect to
+ * full/low speed devices using "Transaction Translators" (TTs).
+ *
+ * TTs should only be known to the hub driver, and high speed bus
+ * drivers (only EHCI for now). They affect periodic scheduling and
+ * sometimes control/bulk error recovery.
+ */
+
+struct usb_device;
+
+struct usb_tt {
+ struct usb_device *hub; /* upstream highspeed hub */
+ int multi; /* true means one TT per port */
+ unsigned think_time; /* think time in ns */
+
+ /* for control/bulk error recovery (CLEAR_TT_BUFFER) */
+ spinlock_t lock;
+ struct list_head clear_list; /* of usb_tt_clear */
+ struct work_struct clear_work;
+};
+
+struct usb_tt_clear {
+ struct list_head clear_list;
+ unsigned tt;
+ u16 devinfo;
+ struct usb_hcd *hcd;
+ struct usb_host_endpoint *ep;
+};
+
+extern int usb_hub_clear_tt_buffer(struct urb *urb);
+extern void usb_ep0_reinit(struct usb_device *);
+
+/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
+#define DeviceRequest \
+ ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
+#define DeviceOutRequest \
+ ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
+
+#define InterfaceRequest \
+ ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+
+#define EndpointRequest \
+ ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+#define EndpointOutRequest \
+ ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+
+/* class requests from the USB 2.0 hub spec, table 11-15 */
+/* GetBusState and SetHubDescriptor are optional, omitted */
+#define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE)
+#define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE)
+#define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR)
+#define GetHubStatus (0xa000 | USB_REQ_GET_STATUS)
+#define GetPortStatus (0xa300 | USB_REQ_GET_STATUS)
+#define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE)
+#define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE)
+
+
+/*-------------------------------------------------------------------------*/
+
+/* class requests from USB 3.0 hub spec, table 10-5 */
+#define SetHubDepth (0x3000 | HUB_SET_DEPTH)
+#define GetPortErrorCount (0x8000 | HUB_GET_PORT_ERR_COUNT)
+
+/*
+ * Generic bandwidth allocation constants/support
+ */
+#define FRAME_TIME_USECS 1000L
+#define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
+ /* Trying not to use worst-case bit-stuffing
+ * of (7/6 * 8 * bytecount) = 9.33 * bytecount */
+ /* bytecount = data payload byte count */
+
+#define NS_TO_US(ns) ((ns + 500L) / 1000L)
+ /* convert & round nanoseconds to microseconds */
+
+
+/*
+ * Full/low speed bandwidth allocation constants/support.
+ */
+#define BW_HOST_DELAY 1000L /* nanoseconds */
+#define BW_HUB_LS_SETUP 333L /* nanoseconds */
+ /* 4 full-speed bit times (est.) */
+
+#define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */
+#define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L)
+#define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L)
+
+/*
+ * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
+ * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
+ * to preallocate bandwidth)
+ */
+#define USB2_HOST_DELAY 5 /* nsec, guess */
+#define HS_NSECS(bytes) (((55 * 8 * 2083) \
+ + (2083UL * (3 + BitTime(bytes))))/1000 \
+ + USB2_HOST_DELAY)
+#define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
+ + (2083UL * (3 + BitTime(bytes))))/1000 \
+ + USB2_HOST_DELAY)
+#define HS_USECS(bytes) NS_TO_US(HS_NSECS(bytes))
+#define HS_USECS_ISO(bytes) NS_TO_US(HS_NSECS_ISO(bytes))
+
+extern long usb_calc_bus_time(int speed, int is_input,
+ int isoc, int bytecount);
+
+/*-------------------------------------------------------------------------*/
+
+extern void usb_set_device_state(struct usb_device *udev,
+ enum usb_device_state new_state);
+
+/*-------------------------------------------------------------------------*/
+
+/* exported only within usbcore */
+
+extern struct list_head usb_bus_list;
+extern struct mutex usb_bus_list_lock;
+extern wait_queue_head_t usb_kill_urb_queue;
+
+extern int usb_find_interface_driver(struct usb_device *dev,
+ struct usb_interface *interface);
+
+#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
+
+#ifdef CONFIG_PM
+extern void usb_root_hub_lost_power(struct usb_device *rhdev);
+extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
+extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_USB_SUSPEND
+extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
+#else
+static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
+{
+ return;
+}
+#endif /* CONFIG_USB_SUSPEND */
+
+
+/*
+ * USB device fs stuff
+ */
+
+#ifdef CONFIG_USB_DEVICEFS
+
+/*
+ * these are expected to be called from the USB core/hub thread
+ * with the kernel lock held
+ */
+extern void usbfs_update_special(void);
+extern int usbfs_init(void);
+extern void usbfs_cleanup(void);
+
+#else /* CONFIG_USB_DEVICEFS */
+
+static inline void usbfs_update_special(void) {}
+static inline int usbfs_init(void) { return 0; }
+static inline void usbfs_cleanup(void) { }
+
+#endif /* CONFIG_USB_DEVICEFS */
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
+
+struct usb_mon_operations {
+ void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
+ void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
+ void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
+ /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
+};
+
+extern struct usb_mon_operations *mon_ops;
+
+static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
+{
+ if (bus->monitored)
+ (*mon_ops->urb_submit)(bus, urb);
+}
+
+static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
+ int error)
+{
+ if (bus->monitored)
+ (*mon_ops->urb_submit_error)(bus, urb, error);
+}
+
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
+ int status)
+{
+ if (bus->monitored)
+ (*mon_ops->urb_complete)(bus, urb, status);
+}
+
+int usb_mon_register(struct usb_mon_operations *ops);
+void usb_mon_deregister(void);
+
+#else
+
+static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
+static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
+ int error) {}
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
+ int status) {}
+
+#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
+
+/*-------------------------------------------------------------------------*/
+
+/* random stuff */
+
+#define RUN_CONTEXT (in_irq() ? "in_irq" \
+ : (in_interrupt() ? "in_interrupt" : "can sleep"))
+
+
+/* This rwsem is for use only by the hub driver and ehci-hcd.
+ * Nobody else should touch it.
+ */
+extern struct rw_semaphore ehci_cf_port_reset_rwsem;
+
+/* Keep track of which host controller drivers are loaded */
+#define USB_UHCI_LOADED 0
+#define USB_OHCI_LOADED 1
+#define USB_EHCI_LOADED 2
+extern unsigned long usb_hcds_loaded;
+
+#endif /* __KERNEL__ */
+
+#endif /* __USB_CORE_HCD_H */