diff options
Diffstat (limited to 'include/linux/pci_hotplug.h')
| -rw-r--r-- | include/linux/pci_hotplug.h | 207 |
1 files changed, 207 insertions, 0 deletions
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h new file mode 100644 index 00000000..5d09cbaf --- /dev/null +++ b/include/linux/pci_hotplug.h @@ -0,0 +1,207 @@ +/* + * PCI HotPlug Core Functions + * + * Copyright (C) 1995,2001 Compaq Computer Corporation + * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2001 IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to <kristen.c.accardi@intel.com> + * + */ +#ifndef _PCI_HOTPLUG_H +#define _PCI_HOTPLUG_H + +/* These values come from the PCI Express Spec */ +enum pcie_link_width { + PCIE_LNK_WIDTH_RESRV = 0x00, + PCIE_LNK_X1 = 0x01, + PCIE_LNK_X2 = 0x02, + PCIE_LNK_X4 = 0x04, + PCIE_LNK_X8 = 0x08, + PCIE_LNK_X12 = 0x0C, + PCIE_LNK_X16 = 0x10, + PCIE_LNK_X32 = 0x20, + PCIE_LNK_WIDTH_UNKNOWN = 0xFF, +}; + +/** + * struct hotplug_slot_ops -the callbacks that the hotplug pci core can use + * @owner: The module owner of this structure + * @mod_name: The module name (KBUILD_MODNAME) of this structure + * @enable_slot: Called when the user wants to enable a specific pci slot + * @disable_slot: Called when the user wants to disable a specific pci slot + * @set_attention_status: Called to set the specific slot's attention LED to + * the specified value + * @hardware_test: Called to run a specified hardware test on the specified + * slot. + * @get_power_status: Called to get the current power status of a slot. + * If this field is NULL, the value passed in the struct hotplug_slot_info + * will be used when this value is requested by a user. + * @get_attention_status: Called to get the current attention status of a slot. + * If this field is NULL, the value passed in the struct hotplug_slot_info + * will be used when this value is requested by a user. + * @get_latch_status: Called to get the current latch status of a slot. + * If this field is NULL, the value passed in the struct hotplug_slot_info + * will be used when this value is requested by a user. + * @get_adapter_status: Called to get see if an adapter is present in the slot or not. + * If this field is NULL, the value passed in the struct hotplug_slot_info + * will be used when this value is requested by a user. + * + * The table of function pointers that is passed to the hotplug pci core by a + * hotplug pci driver. These functions are called by the hotplug pci core when + * the user wants to do something to a specific slot (query it for information, + * set an LED, enable / disable power, etc.) + */ +struct hotplug_slot_ops { + struct module *owner; + const char *mod_name; + int (*enable_slot) (struct hotplug_slot *slot); + int (*disable_slot) (struct hotplug_slot *slot); + int (*set_attention_status) (struct hotplug_slot *slot, u8 value); + int (*hardware_test) (struct hotplug_slot *slot, u32 value); + int (*get_power_status) (struct hotplug_slot *slot, u8 *value); + int (*get_attention_status) (struct hotplug_slot *slot, u8 *value); + int (*get_latch_status) (struct hotplug_slot *slot, u8 *value); + int (*get_adapter_status) (struct hotplug_slot *slot, u8 *value); +}; + +/** + * struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot + * @power_status: if power is enabled or not (1/0) + * @attention_status: if the attention light is enabled or not (1/0) + * @latch_status: if the latch (if any) is open or closed (1/0) + * @adapter_status: if there is a pci board present in the slot or not (1/0) + * + * Used to notify the hotplug pci core of the status of a specific slot. + */ +struct hotplug_slot_info { + u8 power_status; + u8 attention_status; + u8 latch_status; + u8 adapter_status; +}; + +/** + * struct hotplug_slot - used to register a physical slot with the hotplug pci core + * @ops: pointer to the &struct hotplug_slot_ops to be used for this slot + * @info: pointer to the &struct hotplug_slot_info for the initial values for + * this slot. + * @release: called during pci_hp_deregister to free memory allocated in a + * hotplug_slot structure. + * @private: used by the hotplug pci controller driver to store whatever it + * needs. + */ +struct hotplug_slot { + struct hotplug_slot_ops *ops; + struct hotplug_slot_info *info; + void (*release) (struct hotplug_slot *slot); + void *private; + + /* Variables below this are for use only by the hotplug pci core. */ + struct list_head slot_list; + struct pci_slot *pci_slot; +}; +#define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj) + +static inline const char *hotplug_slot_name(const struct hotplug_slot *slot) +{ + return pci_slot_name(slot->pci_slot); +} + +extern int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *pbus, + int nr, const char *name, + struct module *owner, const char *mod_name); +extern int pci_hp_deregister(struct hotplug_slot *slot); +extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot, + struct hotplug_slot_info *info); + +static inline int pci_hp_register(struct hotplug_slot *slot, + struct pci_bus *pbus, + int devnr, const char *name) +{ + return __pci_hp_register(slot, pbus, devnr, name, + THIS_MODULE, KBUILD_MODNAME); +} + +/* PCI Setting Record (Type 0) */ +struct hpp_type0 { + u32 revision; + u8 cache_line_size; + u8 latency_timer; + u8 enable_serr; + u8 enable_perr; +}; + +/* PCI-X Setting Record (Type 1) */ +struct hpp_type1 { + u32 revision; + u8 max_mem_read; + u8 avg_max_split; + u16 tot_max_split; +}; + +/* PCI Express Setting Record (Type 2) */ +struct hpp_type2 { + u32 revision; + u32 unc_err_mask_and; + u32 unc_err_mask_or; + u32 unc_err_sever_and; + u32 unc_err_sever_or; + u32 cor_err_mask_and; + u32 cor_err_mask_or; + u32 adv_err_cap_and; + u32 adv_err_cap_or; + u16 pci_exp_devctl_and; + u16 pci_exp_devctl_or; + u16 pci_exp_lnkctl_and; + u16 pci_exp_lnkctl_or; + u32 sec_unc_err_sever_and; + u32 sec_unc_err_sever_or; + u32 sec_unc_err_mask_and; + u32 sec_unc_err_mask_or; +}; + +struct hotplug_params { + struct hpp_type0 *t0; /* Type0: NULL if not available */ + struct hpp_type1 *t1; /* Type1: NULL if not available */ + struct hpp_type2 *t2; /* Type2: NULL if not available */ + struct hpp_type0 type0_data; + struct hpp_type1 type1_data; + struct hpp_type2 type2_data; +}; + +#ifdef CONFIG_ACPI +#include <acpi/acpi.h> +#include <acpi/acpi_bus.h> +int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp); +int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags); +int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle); +int acpi_pci_detect_ejectable(acpi_handle handle); +#else +static inline int pci_get_hp_params(struct pci_dev *dev, + struct hotplug_params *hpp) +{ + return -ENODEV; +} +#endif + +void pci_configure_slot(struct pci_dev *dev); +#endif + |