diff options
Diffstat (limited to 'include/linux/ide.h')
| -rw-r--r-- | include/linux/ide.h | 1558 |
1 files changed, 1558 insertions, 0 deletions
diff --git a/include/linux/ide.h b/include/linux/ide.h new file mode 100644 index 00000000..42557851 --- /dev/null +++ b/include/linux/ide.h @@ -0,0 +1,1558 @@ +#ifndef _IDE_H +#define _IDE_H +/* + * linux/include/linux/ide.h + * + * Copyright (C) 1994-2002 Linus Torvalds & authors + */ + +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/ata.h> +#include <linux/blkdev.h> +#include <linux/proc_fs.h> +#include <linux/interrupt.h> +#include <linux/bitops.h> +#include <linux/bio.h> +#include <linux/device.h> +#include <linux/pci.h> +#include <linux/completion.h> +#include <linux/pm.h> +#include <linux/mutex.h> +#ifdef CONFIG_BLK_DEV_IDEACPI +#include <acpi/acpi.h> +#endif +#include <asm/byteorder.h> +#include <asm/system.h> +#include <asm/io.h> + +/* for request_sense */ +#include <linux/cdrom.h> + +#if defined(CONFIG_CRIS) || defined(CONFIG_FRV) || defined(CONFIG_MN10300) +# define SUPPORT_VLB_SYNC 0 +#else +# define SUPPORT_VLB_SYNC 1 +#endif + +/* + * Probably not wise to fiddle with these + */ +#define IDE_DEFAULT_MAX_FAILURES 1 +#define ERROR_MAX 8 /* Max read/write errors per sector */ +#define ERROR_RESET 3 /* Reset controller every 4th retry */ +#define ERROR_RECAL 1 /* Recalibrate every 2nd retry */ + +/* Error codes returned in rq->errors to the higher part of the driver. */ +enum { + IDE_DRV_ERROR_GENERAL = 101, + IDE_DRV_ERROR_FILEMARK = 102, + IDE_DRV_ERROR_EOD = 103, +}; + +/* + * Definitions for accessing IDE controller registers + */ +#define IDE_NR_PORTS (10) + +struct ide_io_ports { + unsigned long data_addr; + + union { + unsigned long error_addr; /* read: error */ + unsigned long feature_addr; /* write: feature */ + }; + + unsigned long nsect_addr; + unsigned long lbal_addr; + unsigned long lbam_addr; + unsigned long lbah_addr; + + unsigned long device_addr; + + union { + unsigned long status_addr; /* read: status */ + unsigned long command_addr; /* write: command */ + }; + + unsigned long ctl_addr; + + unsigned long irq_addr; +}; + +#define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good)) + +#define BAD_R_STAT (ATA_BUSY | ATA_ERR) +#define BAD_W_STAT (BAD_R_STAT | ATA_DF) +#define BAD_STAT (BAD_R_STAT | ATA_DRQ) +#define DRIVE_READY (ATA_DRDY | ATA_DSC) + +#define BAD_CRC (ATA_ABORTED | ATA_ICRC) + +#define SATA_NR_PORTS (3) /* 16 possible ?? */ + +#define SATA_STATUS_OFFSET (0) +#define SATA_ERROR_OFFSET (1) +#define SATA_CONTROL_OFFSET (2) + +/* + * Our Physical Region Descriptor (PRD) table should be large enough + * to handle the biggest I/O request we are likely to see. Since requests + * can have no more than 256 sectors, and since the typical blocksize is + * two or more sectors, we could get by with a limit of 128 entries here for + * the usual worst case. Most requests seem to include some contiguous blocks, + * further reducing the number of table entries required. + * + * The driver reverts to PIO mode for individual requests that exceed + * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling + * 100% of all crazy scenarios here is not necessary. + * + * As it turns out though, we must allocate a full 4KB page for this, + * so the two PRD tables (ide0 & ide1) will each get half of that, + * allowing each to have about 256 entries (8 bytes each) from this. + */ +#define PRD_BYTES 8 +#define PRD_ENTRIES 256 + +/* + * Some more useful definitions + */ +#define PARTN_BITS 6 /* number of minor dev bits for partitions */ +#define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */ +#define SECTOR_SIZE 512 + +/* + * Timeouts for various operations: + */ +enum { + /* spec allows up to 20ms, but CF cards and SSD drives need more */ + WAIT_DRQ = 1 * HZ, /* 1s */ + /* some laptops are very slow */ + WAIT_READY = 5 * HZ, /* 5s */ + /* should be less than 3ms (?), if all ATAPI CD is closed at boot */ + WAIT_PIDENTIFY = 10 * HZ, /* 10s */ + /* worst case when spinning up */ + WAIT_WORSTCASE = 30 * HZ, /* 30s */ + /* maximum wait for an IRQ to happen */ + WAIT_CMD = 10 * HZ, /* 10s */ + /* Some drives require a longer IRQ timeout. */ + WAIT_FLOPPY_CMD = 50 * HZ, /* 50s */ + /* + * Some drives (for example, Seagate STT3401A Travan) require a very + * long timeout, because they don't return an interrupt or clear their + * BSY bit until after the command completes (even retension commands). + */ + WAIT_TAPE_CMD = 900 * HZ, /* 900s */ + /* minimum sleep time */ + WAIT_MIN_SLEEP = HZ / 50, /* 20ms */ +}; + +/* + * Op codes for special requests to be handled by ide_special_rq(). + * Values should be in the range of 0x20 to 0x3f. + */ +#define REQ_DRIVE_RESET 0x20 +#define REQ_DEVSET_EXEC 0x21 +#define REQ_PARK_HEADS 0x22 +#define REQ_UNPARK_HEADS 0x23 + +/* + * hwif_chipset_t is used to keep track of the specific hardware + * chipset used by each IDE interface, if known. + */ +enum { ide_unknown, ide_generic, ide_pci, + ide_cmd640, ide_dtc2278, ide_ali14xx, + ide_qd65xx, ide_umc8672, ide_ht6560b, + ide_4drives, ide_pmac, ide_acorn, + ide_au1xxx, ide_palm3710 +}; + +typedef u8 hwif_chipset_t; + +/* + * Structure to hold all information about the location of this port + */ +struct ide_hw { + union { + struct ide_io_ports io_ports; + unsigned long io_ports_array[IDE_NR_PORTS]; + }; + + int irq; /* our irq number */ + struct device *dev, *parent; + unsigned long config; +}; + +static inline void ide_std_init_ports(struct ide_hw *hw, + unsigned long io_addr, + unsigned long ctl_addr) +{ + unsigned int i; + + for (i = 0; i <= 7; i++) + hw->io_ports_array[i] = io_addr++; + + hw->io_ports.ctl_addr = ctl_addr; +} + +#define MAX_HWIFS 10 + +/* + * Now for the data we need to maintain per-drive: ide_drive_t + */ + +#define ide_scsi 0x21 +#define ide_disk 0x20 +#define ide_optical 0x7 +#define ide_cdrom 0x5 +#define ide_tape 0x1 +#define ide_floppy 0x0 + +/* + * Special Driver Flags + */ +enum { + IDE_SFLAG_SET_GEOMETRY = (1 << 0), + IDE_SFLAG_RECALIBRATE = (1 << 1), + IDE_SFLAG_SET_MULTMODE = (1 << 2), +}; + +/* + * Status returned from various ide_ functions + */ +typedef enum { + ide_stopped, /* no drive operation was started */ + ide_started, /* a drive operation was started, handler was set */ +} ide_startstop_t; + +enum { + IDE_VALID_ERROR = (1 << 1), + IDE_VALID_FEATURE = IDE_VALID_ERROR, + IDE_VALID_NSECT = (1 << 2), + IDE_VALID_LBAL = (1 << 3), + IDE_VALID_LBAM = (1 << 4), + IDE_VALID_LBAH = (1 << 5), + IDE_VALID_DEVICE = (1 << 6), + IDE_VALID_LBA = IDE_VALID_LBAL | + IDE_VALID_LBAM | + IDE_VALID_LBAH, + IDE_VALID_OUT_TF = IDE_VALID_FEATURE | + IDE_VALID_NSECT | + IDE_VALID_LBA, + IDE_VALID_IN_TF = IDE_VALID_NSECT | + IDE_VALID_LBA, + IDE_VALID_OUT_HOB = IDE_VALID_OUT_TF, + IDE_VALID_IN_HOB = IDE_VALID_ERROR | + IDE_VALID_NSECT | + IDE_VALID_LBA, +}; + +enum { + IDE_TFLAG_LBA48 = (1 << 0), + IDE_TFLAG_WRITE = (1 << 1), + IDE_TFLAG_CUSTOM_HANDLER = (1 << 2), + IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 3), + /* force 16-bit I/O operations */ + IDE_TFLAG_IO_16BIT = (1 << 4), + /* struct ide_cmd was allocated using kmalloc() */ + IDE_TFLAG_DYN = (1 << 5), + IDE_TFLAG_FS = (1 << 6), + IDE_TFLAG_MULTI_PIO = (1 << 7), + IDE_TFLAG_SET_XFER = (1 << 8), +}; + +enum { + IDE_FTFLAG_FLAGGED = (1 << 0), + IDE_FTFLAG_SET_IN_FLAGS = (1 << 1), + IDE_FTFLAG_OUT_DATA = (1 << 2), + IDE_FTFLAG_IN_DATA = (1 << 3), +}; + +struct ide_taskfile { + u8 data; /* 0: data byte (for TASKFILE ioctl) */ + union { /* 1: */ + u8 error; /* read: error */ + u8 feature; /* write: feature */ + }; + u8 nsect; /* 2: number of sectors */ + u8 lbal; /* 3: LBA low */ + u8 lbam; /* 4: LBA mid */ + u8 lbah; /* 5: LBA high */ + u8 device; /* 6: device select */ + union { /* 7: */ + u8 status; /* read: status */ + u8 command; /* write: command */ + }; +}; + +struct ide_cmd { + struct ide_taskfile tf; + struct ide_taskfile hob; + struct { + struct { + u8 tf; + u8 hob; + } out, in; + } valid; + + u16 tf_flags; + u8 ftf_flags; /* for TASKFILE ioctl */ + int protocol; + + int sg_nents; /* number of sg entries */ + int orig_sg_nents; + int sg_dma_direction; /* DMA transfer direction */ + + unsigned int nbytes; + unsigned int nleft; + unsigned int last_xfer_len; + + struct scatterlist *cursg; + unsigned int cursg_ofs; + + struct request *rq; /* copy of request */ +}; + +/* ATAPI packet command flags */ +enum { + /* set when an error is considered normal - no retry (ide-tape) */ + PC_FLAG_ABORT = (1 << 0), + PC_FLAG_SUPPRESS_ERROR = (1 << 1), + PC_FLAG_WAIT_FOR_DSC = (1 << 2), + PC_FLAG_DMA_OK = (1 << 3), + PC_FLAG_DMA_IN_PROGRESS = (1 << 4), + PC_FLAG_DMA_ERROR = (1 << 5), + PC_FLAG_WRITING = (1 << 6), +}; + +#define ATAPI_WAIT_PC (60 * HZ) + +struct ide_atapi_pc { + /* actual packet bytes */ + u8 c[12]; + /* incremented on each retry */ + int retries; + int error; + + /* bytes to transfer */ + int req_xfer; + + /* the corresponding request */ + struct request *rq; + + unsigned long flags; + + /* + * those are more or less driver-specific and some of them are subject + * to change/removal later. + */ + unsigned long timeout; +}; + +struct ide_devset; +struct ide_driver; + +#ifdef CONFIG_BLK_DEV_IDEACPI +struct ide_acpi_drive_link; +struct ide_acpi_hwif_link; +#endif + +struct ide_drive_s; + +struct ide_disk_ops { + int (*check)(struct ide_drive_s *, const char *); + int (*get_capacity)(struct ide_drive_s *); + void (*unlock_native_capacity)(struct ide_drive_s *); + void (*setup)(struct ide_drive_s *); + void (*flush)(struct ide_drive_s *); + int (*init_media)(struct ide_drive_s *, struct gendisk *); + int (*set_doorlock)(struct ide_drive_s *, struct gendisk *, + int); + ide_startstop_t (*do_request)(struct ide_drive_s *, struct request *, + sector_t); + int (*ioctl)(struct ide_drive_s *, struct block_device *, + fmode_t, unsigned int, unsigned long); +}; + +/* ATAPI device flags */ +enum { + IDE_AFLAG_DRQ_INTERRUPT = (1 << 0), + + /* ide-cd */ + /* Drive cannot eject the disc. */ + IDE_AFLAG_NO_EJECT = (1 << 1), + /* Drive is a pre ATAPI 1.2 drive. */ + IDE_AFLAG_PRE_ATAPI12 = (1 << 2), + /* TOC addresses are in BCD. */ + IDE_AFLAG_TOCADDR_AS_BCD = (1 << 3), + /* TOC track numbers are in BCD. */ + IDE_AFLAG_TOCTRACKS_AS_BCD = (1 << 4), + /* Saved TOC information is current. */ + IDE_AFLAG_TOC_VALID = (1 << 6), + /* We think that the drive door is locked. */ + IDE_AFLAG_DOOR_LOCKED = (1 << 7), + /* SET_CD_SPEED command is unsupported. */ + IDE_AFLAG_NO_SPEED_SELECT = (1 << 8), + IDE_AFLAG_VERTOS_300_SSD = (1 << 9), + IDE_AFLAG_VERTOS_600_ESD = (1 << 10), + IDE_AFLAG_SANYO_3CD = (1 << 11), + IDE_AFLAG_FULL_CAPS_PAGE = (1 << 12), + IDE_AFLAG_PLAY_AUDIO_OK = (1 << 13), + IDE_AFLAG_LE_SPEED_FIELDS = (1 << 14), + + /* ide-floppy */ + /* Avoid commands not supported in Clik drive */ + IDE_AFLAG_CLIK_DRIVE = (1 << 15), + /* Requires BH algorithm for packets */ + IDE_AFLAG_ZIP_DRIVE = (1 << 16), + /* Supports format progress report */ + IDE_AFLAG_SRFP = (1 << 17), + + /* ide-tape */ + IDE_AFLAG_IGNORE_DSC = (1 << 18), + /* 0 When the tape position is unknown */ + IDE_AFLAG_ADDRESS_VALID = (1 << 19), + /* Device already opened */ + IDE_AFLAG_BUSY = (1 << 20), + /* Attempt to auto-detect the current user block size */ + IDE_AFLAG_DETECT_BS = (1 << 21), + /* Currently on a filemark */ + IDE_AFLAG_FILEMARK = (1 << 22), + /* 0 = no tape is loaded, so we don't rewind after ejecting */ + IDE_AFLAG_MEDIUM_PRESENT = (1 << 23), + + IDE_AFLAG_NO_AUTOCLOSE = (1 << 24), +}; + +/* device flags */ +enum { + /* restore settings after device reset */ + IDE_DFLAG_KEEP_SETTINGS = (1 << 0), + /* device is using DMA for read/write */ + IDE_DFLAG_USING_DMA = (1 << 1), + /* okay to unmask other IRQs */ + IDE_DFLAG_UNMASK = (1 << 2), + /* don't attempt flushes */ + IDE_DFLAG_NOFLUSH = (1 << 3), + /* DSC overlap */ + IDE_DFLAG_DSC_OVERLAP = (1 << 4), + /* give potential excess bandwidth */ + IDE_DFLAG_NICE1 = (1 << 5), + /* device is physically present */ + IDE_DFLAG_PRESENT = (1 << 6), + /* disable Host Protected Area */ + IDE_DFLAG_NOHPA = (1 << 7), + /* id read from device (synthetic if not set) */ + IDE_DFLAG_ID_READ = (1 << 8), + IDE_DFLAG_NOPROBE = (1 << 9), + /* need to do check_media_change() */ + IDE_DFLAG_REMOVABLE = (1 << 10), + /* needed for removable devices */ + IDE_DFLAG_ATTACH = (1 << 11), + IDE_DFLAG_FORCED_GEOM = (1 << 12), + /* disallow setting unmask bit */ + IDE_DFLAG_NO_UNMASK = (1 << 13), + /* disallow enabling 32-bit I/O */ + IDE_DFLAG_NO_IO_32BIT = (1 << 14), + /* for removable only: door lock/unlock works */ + IDE_DFLAG_DOORLOCKING = (1 << 15), + /* disallow DMA */ + IDE_DFLAG_NODMA = (1 << 16), + /* powermanagement told us not to do anything, so sleep nicely */ + IDE_DFLAG_BLOCKED = (1 << 17), + /* sleeping & sleep field valid */ + IDE_DFLAG_SLEEPING = (1 << 18), + IDE_DFLAG_POST_RESET = (1 << 19), + IDE_DFLAG_UDMA33_WARNED = (1 << 20), + IDE_DFLAG_LBA48 = (1 << 21), + /* status of write cache */ + IDE_DFLAG_WCACHE = (1 << 22), + /* used for ignoring ATA_DF */ + IDE_DFLAG_NOWERR = (1 << 23), + /* retrying in PIO */ + IDE_DFLAG_DMA_PIO_RETRY = (1 << 24), + IDE_DFLAG_LBA = (1 << 25), + /* don't unload heads */ + IDE_DFLAG_NO_UNLOAD = (1 << 26), + /* heads unloaded, please don't reset port */ + IDE_DFLAG_PARKED = (1 << 27), + IDE_DFLAG_MEDIA_CHANGED = (1 << 28), + /* write protect */ + IDE_DFLAG_WP = (1 << 29), + IDE_DFLAG_FORMAT_IN_PROGRESS = (1 << 30), + IDE_DFLAG_NIEN_QUIRK = (1 << 31), +}; + +struct ide_drive_s { + char name[4]; /* drive name, such as "hda" */ + char driver_req[10]; /* requests specific driver */ + + struct request_queue *queue; /* request queue */ + + struct request *rq; /* current request */ + void *driver_data; /* extra driver data */ + u16 *id; /* identification info */ +#ifdef CONFIG_IDE_PROC_FS + struct proc_dir_entry *proc; /* /proc/ide/ directory entry */ + const struct ide_proc_devset *settings; /* /proc/ide/ drive settings */ +#endif + struct hwif_s *hwif; /* actually (ide_hwif_t *) */ + + const struct ide_disk_ops *disk_ops; + + unsigned long dev_flags; + + unsigned long sleep; /* sleep until this time */ + unsigned long timeout; /* max time to wait for irq */ + + u8 special_flags; /* special action flags */ + + u8 select; /* basic drive/head select reg value */ + u8 retry_pio; /* retrying dma capable host in pio */ + u8 waiting_for_dma; /* dma currently in progress */ + u8 dma; /* atapi dma flag */ + + u8 init_speed; /* transfer rate set at boot */ + u8 current_speed; /* current transfer rate set */ + u8 desired_speed; /* desired transfer rate set */ + u8 pio_mode; /* for ->set_pio_mode _only_ */ + u8 dma_mode; /* for ->set_dma_mode _only_ */ + u8 dn; /* now wide spread use */ + u8 acoustic; /* acoustic management */ + u8 media; /* disk, cdrom, tape, floppy, ... */ + u8 ready_stat; /* min status value for drive ready */ + u8 mult_count; /* current multiple sector setting */ + u8 mult_req; /* requested multiple sector setting */ + u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */ + u8 bad_wstat; /* used for ignoring ATA_DF */ + u8 head; /* "real" number of heads */ + u8 sect; /* "real" sectors per track */ + u8 bios_head; /* BIOS/fdisk/LILO number of heads */ + u8 bios_sect; /* BIOS/fdisk/LILO sectors per track */ + + /* delay this long before sending packet command */ + u8 pc_delay; + + unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */ + unsigned int cyl; /* "real" number of cyls */ + void *drive_data; /* used by set_pio_mode/dev_select() */ + unsigned int failures; /* current failure count */ + unsigned int max_failures; /* maximum allowed failure count */ + u64 probed_capacity;/* initial/native media capacity */ + u64 capacity64; /* total number of sectors */ + + int lun; /* logical unit */ + int crc_count; /* crc counter to reduce drive speed */ + + unsigned long debug_mask; /* debugging levels switch */ + +#ifdef CONFIG_BLK_DEV_IDEACPI + struct ide_acpi_drive_link *acpidata; +#endif + struct list_head list; + struct device gendev; + struct completion gendev_rel_comp; /* to deal with device release() */ + + /* current packet command */ + struct ide_atapi_pc *pc; + + /* last failed packet command */ + struct ide_atapi_pc *failed_pc; + + /* callback for packet commands */ + int (*pc_callback)(struct ide_drive_s *, int); + + ide_startstop_t (*irq_handler)(struct ide_drive_s *); + + unsigned long atapi_flags; + + struct ide_atapi_pc request_sense_pc; + + /* current sense rq and buffer */ + bool sense_rq_armed; + struct request sense_rq; + struct request_sense sense_data; +}; + +typedef struct ide_drive_s ide_drive_t; + +#define to_ide_device(dev) container_of(dev, ide_drive_t, gendev) + +#define to_ide_drv(obj, cont_type) \ + container_of(obj, struct cont_type, dev) + +#define ide_drv_g(disk, cont_type) \ + container_of((disk)->private_data, struct cont_type, driver) + +struct ide_port_info; + +struct ide_tp_ops { + void (*exec_command)(struct hwif_s *, u8); + u8 (*read_status)(struct hwif_s *); + u8 (*read_altstatus)(struct hwif_s *); + void (*write_devctl)(struct hwif_s *, u8); + + void (*dev_select)(ide_drive_t *); + void (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8); + void (*tf_read)(ide_drive_t *, struct ide_taskfile *, u8); + + void (*input_data)(ide_drive_t *, struct ide_cmd *, + void *, unsigned int); + void (*output_data)(ide_drive_t *, struct ide_cmd *, + void *, unsigned int); +}; + +extern const struct ide_tp_ops default_tp_ops; + +/** + * struct ide_port_ops - IDE port operations + * + * @init_dev: host specific initialization of a device + * @set_pio_mode: routine to program host for PIO mode + * @set_dma_mode: routine to program host for DMA mode + * @reset_poll: chipset polling based on hba specifics + * @pre_reset: chipset specific changes to default for device-hba resets + * @resetproc: routine to reset controller after a disk reset + * @maskproc: special host masking for drive selection + * @quirkproc: check host's drive quirk list + * @clear_irq: clear IRQ + * + * @mdma_filter: filter MDMA modes + * @udma_filter: filter UDMA modes + * + * @cable_detect: detect cable type + */ +struct ide_port_ops { + void (*init_dev)(ide_drive_t *); + void (*set_pio_mode)(struct hwif_s *, ide_drive_t *); + void (*set_dma_mode)(struct hwif_s *, ide_drive_t *); + int (*reset_poll)(ide_drive_t *); + void (*pre_reset)(ide_drive_t *); + void (*resetproc)(ide_drive_t *); + void (*maskproc)(ide_drive_t *, int); + void (*quirkproc)(ide_drive_t *); + void (*clear_irq)(ide_drive_t *); + int (*test_irq)(struct hwif_s *); + + u8 (*mdma_filter)(ide_drive_t *); + u8 (*udma_filter)(ide_drive_t *); + + u8 (*cable_detect)(struct hwif_s *); +}; + +struct ide_dma_ops { + void (*dma_host_set)(struct ide_drive_s *, int); + int (*dma_setup)(struct ide_drive_s *, struct ide_cmd *); + void (*dma_start)(struct ide_drive_s *); + int (*dma_end)(struct ide_drive_s *); + int (*dma_test_irq)(struct ide_drive_s *); + void (*dma_lost_irq)(struct ide_drive_s *); + /* below ones are optional */ + int (*dma_check)(struct ide_drive_s *, struct ide_cmd *); + int (*dma_timer_expiry)(struct ide_drive_s *); + void (*dma_clear)(struct ide_drive_s *); + /* + * The following method is optional and only required to be + * implemented for the SFF-8038i compatible controllers. + */ + u8 (*dma_sff_read_status)(struct hwif_s *); +}; + +enum { + IDE_PFLAG_PROBING = (1 << 0), +}; + +struct ide_host; + +typedef struct hwif_s { + struct hwif_s *mate; /* other hwif from same PCI chip */ + struct proc_dir_entry *proc; /* /proc/ide/ directory entry */ + + struct ide_host *host; + + char name[6]; /* name of interface, eg. "ide0" */ + + struct ide_io_ports io_ports; + + unsigned long sata_scr[SATA_NR_PORTS]; + + ide_drive_t *devices[MAX_DRIVES + 1]; + + unsigned long port_flags; + + u8 major; /* our major number */ + u8 index; /* 0 for ide0; 1 for ide1; ... */ + u8 channel; /* for dual-port chips: 0=primary, 1=secondary */ + + u32 host_flags; + + u8 pio_mask; + + u8 ultra_mask; + u8 mwdma_mask; + u8 swdma_mask; + + u8 cbl; /* cable type */ + + hwif_chipset_t chipset; /* sub-module for tuning.. */ + + struct device *dev; + + void (*rw_disk)(ide_drive_t *, struct request *); + + const struct ide_tp_ops *tp_ops; + const struct ide_port_ops *port_ops; + const struct ide_dma_ops *dma_ops; + + /* dma physical region descriptor table (cpu view) */ + unsigned int *dmatable_cpu; + /* dma physical region descriptor table (dma view) */ + dma_addr_t dmatable_dma; + + /* maximum number of PRD table entries */ + int prd_max_nents; + /* PRD entry size in bytes */ + int prd_ent_size; + + /* Scatter-gather list used to build the above */ + struct scatterlist *sg_table; + int sg_max_nents; /* Maximum number of entries in it */ + + struct ide_cmd cmd; /* current command */ + + int rqsize; /* max sectors per request */ + int irq; /* our irq number */ + + unsigned long dma_base; /* base addr for dma ports */ + + unsigned long config_data; /* for use by chipset-specific code */ + unsigned long select_data; /* for use by chipset-specific code */ + + unsigned long extra_base; /* extra addr for dma ports */ + unsigned extra_ports; /* number of extra dma ports */ + + unsigned present : 1; /* this interface exists */ + unsigned busy : 1; /* serializes devices on a port */ + + struct device gendev; + struct device *portdev; + + struct completion gendev_rel_comp; /* To deal with device release() */ + + void *hwif_data; /* extra hwif data */ + +#ifdef CONFIG_BLK_DEV_IDEACPI + struct ide_acpi_hwif_link *acpidata; +#endif + + /* IRQ handler, if active */ + ide_startstop_t (*handler)(ide_drive_t *); + + /* BOOL: polling active & poll_timeout field valid */ + unsigned int polling : 1; + + /* current drive */ + ide_drive_t *cur_dev; + + /* current request */ + struct request *rq; + + /* failsafe timer */ + struct timer_list timer; + /* timeout value during long polls */ + unsigned long poll_timeout; + /* queried upon timeouts */ + int (*expiry)(ide_drive_t *); + + int req_gen; + int req_gen_timer; + + spinlock_t lock; +} ____cacheline_internodealigned_in_smp ide_hwif_t; + +#define MAX_HOST_PORTS 4 + +struct ide_host { + ide_hwif_t *ports[MAX_HOST_PORTS + 1]; + unsigned int n_ports; + struct device *dev[2]; + + int (*init_chipset)(struct pci_dev *); + + void (*get_lock)(irq_handler_t, void *); + void (*release_lock)(void); + + irq_handler_t irq_handler; + + unsigned long host_flags; + + int irq_flags; + + void *host_priv; + ide_hwif_t *cur_port; /* for hosts requiring serialization */ + + /* used for hosts requiring serialization */ + volatile unsigned long host_busy; +}; + +#define IDE_HOST_BUSY 0 + +/* + * internal ide interrupt handler type + */ +typedef ide_startstop_t (ide_handler_t)(ide_drive_t *); +typedef int (ide_expiry_t)(ide_drive_t *); + +/* used by ide-cd, ide-floppy, etc. */ +typedef void (xfer_func_t)(ide_drive_t *, struct ide_cmd *, void *, unsigned); + +extern struct mutex ide_setting_mtx; + +/* + * configurable drive settings + */ + +#define DS_SYNC (1 << 0) + +struct ide_devset { + int (*get)(ide_drive_t *); + int (*set)(ide_drive_t *, int); + unsigned int flags; +}; + +#define __DEVSET(_flags, _get, _set) { \ + .flags = _flags, \ + .get = _get, \ + .set = _set, \ +} + +#define ide_devset_get(name, field) \ +static int get_##name(ide_drive_t *drive) \ +{ \ + return drive->field; \ +} + +#define ide_devset_set(name, field) \ +static int set_##name(ide_drive_t *drive, int arg) \ +{ \ + drive->field = arg; \ + return 0; \ +} + +#define ide_devset_get_flag(name, flag) \ +static int get_##name(ide_drive_t *drive) \ +{ \ + return !!(drive->dev_flags & flag); \ +} + +#define ide_devset_set_flag(name, flag) \ +static int set_##name(ide_drive_t *drive, int arg) \ +{ \ + if (arg) \ + drive->dev_flags |= flag; \ + else \ + drive->dev_flags &= ~flag; \ + return 0; \ +} + +#define __IDE_DEVSET(_name, _flags, _get, _set) \ +const struct ide_devset ide_devset_##_name = \ + __DEVSET(_flags, _get, _set) + +#define IDE_DEVSET(_name, _flags, _get, _set) \ +static __IDE_DEVSET(_name, _flags, _get, _set) + +#define ide_devset_rw(_name, _func) \ +IDE_DEVSET(_name, 0, get_##_func, set_##_func) + +#define ide_devset_w(_name, _func) \ +IDE_DEVSET(_name, 0, NULL, set_##_func) + +#define ide_ext_devset_rw(_name, _func) \ +__IDE_DEVSET(_name, 0, get_##_func, set_##_func) + +#define ide_ext_devset_rw_sync(_name, _func) \ +__IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func) + +#define ide_decl_devset(_name) \ +extern const struct ide_devset ide_devset_##_name + +ide_decl_devset(io_32bit); +ide_decl_devset(keepsettings); +ide_decl_devset(pio_mode); +ide_decl_devset(unmaskirq); +ide_decl_devset(using_dma); + +#ifdef CONFIG_IDE_PROC_FS +/* + * /proc/ide interface + */ + +#define ide_devset_rw_field(_name, _field) \ +ide_devset_get(_name, _field); \ +ide_devset_set(_name, _field); \ +IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name) + +#define ide_devset_rw_flag(_name, _field) \ +ide_devset_get_flag(_name, _field); \ +ide_devset_set_flag(_name, _field); \ +IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name) + +struct ide_proc_devset { + const char *name; + const struct ide_devset *setting; + int min, max; + int (*mulf)(ide_drive_t *); + int (*divf)(ide_drive_t *); +}; + +#define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \ + .name = __stringify(_name), \ + .setting = &ide_devset_##_name, \ + .min = _min, \ + .max = _max, \ + .mulf = _mulf, \ + .divf = _divf, \ +} + +#define IDE_PROC_DEVSET(_name, _min, _max) \ +__IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL) + +typedef struct { + const char *name; + mode_t mode; + const struct file_operations *proc_fops; +} ide_proc_entry_t; + +void proc_ide_create(void); +void proc_ide_destroy(void); +void ide_proc_register_port(ide_hwif_t *); +void ide_proc_port_register_devices(ide_hwif_t *); +void ide_proc_unregister_device(ide_drive_t *); +void ide_proc_unregister_port(ide_hwif_t *); +void ide_proc_register_driver(ide_drive_t *, struct ide_driver *); +void ide_proc_unregister_driver(ide_drive_t *, struct ide_driver *); + +extern const struct file_operations ide_capacity_proc_fops; +extern const struct file_operations ide_geometry_proc_fops; +#else +static inline void proc_ide_create(void) { ; } +static inline void proc_ide_destroy(void) { ; } +static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; } +static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; } +static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; } +static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; } +static inline void ide_proc_register_driver(ide_drive_t *drive, + struct ide_driver *driver) { ; } +static inline void ide_proc_unregister_driver(ide_drive_t *drive, + struct ide_driver *driver) { ; } +#endif + +enum { + /* enter/exit functions */ + IDE_DBG_FUNC = (1 << 0), + /* sense key/asc handling */ + IDE_DBG_SENSE = (1 << 1), + /* packet commands handling */ + IDE_DBG_PC = (1 << 2), + /* request handling */ + IDE_DBG_RQ = (1 << 3), + /* driver probing/setup */ + IDE_DBG_PROBE = (1 << 4), +}; + +/* DRV_NAME has to be defined in the driver before using the macro below */ +#define __ide_debug_log(lvl, fmt, args...) \ +{ \ + if (unlikely(drive->debug_mask & lvl)) \ + printk(KERN_INFO DRV_NAME ": %s: " fmt "\n", \ + __func__, ## args); \ +} + +/* + * Power Management state machine (rq->pm->pm_step). + * + * For each step, the core calls ide_start_power_step() first. + * This can return: + * - ide_stopped : In this case, the core calls us back again unless + * step have been set to ide_power_state_completed. + * - ide_started : In this case, the channel is left busy until an + * async event (interrupt) occurs. + * Typically, ide_start_power_step() will issue a taskfile request with + * do_rw_taskfile(). + * + * Upon reception of the interrupt, the core will call ide_complete_power_step() + * with the error code if any. This routine should update the step value + * and return. It should not start a new request. The core will call + * ide_start_power_step() for the new step value, unless step have been + * set to IDE_PM_COMPLETED. + */ +enum { + IDE_PM_START_SUSPEND, + IDE_PM_FLUSH_CACHE = IDE_PM_START_SUSPEND, + IDE_PM_STANDBY, + + IDE_PM_START_RESUME, + IDE_PM_RESTORE_PIO = IDE_PM_START_RESUME, + IDE_PM_IDLE, + IDE_PM_RESTORE_DMA, + + IDE_PM_COMPLETED, +}; + +int generic_ide_suspend(struct device *, pm_message_t); +int generic_ide_resume(struct device *); + +void ide_complete_power_step(ide_drive_t *, struct request *); +ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *); +void ide_complete_pm_rq(ide_drive_t *, struct request *); +void ide_check_pm_state(ide_drive_t *, struct request *); + +/* + * Subdrivers support. + * + * The gendriver.owner field should be set to the module owner of this driver. + * The gendriver.name field should be set to the name of this driver + */ +struct ide_driver { + const char *version; + ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t); + struct device_driver gen_driver; + int (*probe)(ide_drive_t *); + void (*remove)(ide_drive_t *); + void (*resume)(ide_drive_t *); + void (*shutdown)(ide_drive_t *); +#ifdef CONFIG_IDE_PROC_FS + ide_proc_entry_t * (*proc_entries)(ide_drive_t *); + const struct ide_proc_devset * (*proc_devsets)(ide_drive_t *); +#endif +}; + +#define to_ide_driver(drv) container_of(drv, struct ide_driver, gen_driver) + +int ide_device_get(ide_drive_t *); +void ide_device_put(ide_drive_t *); + +struct ide_ioctl_devset { + unsigned int get_ioctl; + unsigned int set_ioctl; + const struct ide_devset *setting; +}; + +int ide_setting_ioctl(ide_drive_t *, struct block_device *, unsigned int, + unsigned long, const struct ide_ioctl_devset *); + +int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned long); + +extern int ide_vlb_clk; +extern int ide_pci_clk; + +int ide_end_rq(ide_drive_t *, struct request *, int, unsigned int); +void ide_kill_rq(ide_drive_t *, struct request *); + +void __ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int); +void ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int); + +void ide_execute_command(ide_drive_t *, struct ide_cmd *, ide_handler_t *, + unsigned int); + +void ide_pad_transfer(ide_drive_t *, int, int); + +ide_startstop_t ide_error(ide_drive_t *, const char *, u8); + +void ide_fix_driveid(u16 *); + +extern void ide_fixstring(u8 *, const int, const int); + +int ide_busy_sleep(ide_drive_t *, unsigned long, int); + +int __ide_wait_stat(ide_drive_t *, u8, u8, unsigned long, u8 *); +int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long); + +ide_startstop_t ide_do_park_unpark(ide_drive_t *, struct request *); +ide_startstop_t ide_do_devset(ide_drive_t *, struct request *); + +extern ide_startstop_t ide_do_reset (ide_drive_t *); + +extern int ide_devset_execute(ide_drive_t *drive, + const struct ide_devset *setting, int arg); + +void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8); +int ide_complete_rq(ide_drive_t *, int, unsigned int); + +void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd); +void ide_tf_dump(const char *, struct ide_cmd *); + +void ide_exec_command(ide_hwif_t *, u8); +u8 ide_read_status(ide_hwif_t *); +u8 ide_read_altstatus(ide_hwif_t *); +void ide_write_devctl(ide_hwif_t *, u8); + +void ide_dev_select(ide_drive_t *); +void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8); +void ide_tf_read(ide_drive_t *, struct ide_taskfile *, u8); + +void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); +void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); + +void SELECT_MASK(ide_drive_t *, int); + +u8 ide_read_error(ide_drive_t *); +void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *); + +int ide_check_ireason(ide_drive_t *, struct request *, int, int, int); + +int ide_check_atapi_device(ide_drive_t *, const char *); + +void ide_init_pc(struct ide_atapi_pc *); + +/* Disk head parking */ +extern wait_queue_head_t ide_park_wq; +ssize_t ide_park_show(struct device *dev, struct device_attribute *attr, + char *buf); +ssize_t ide_park_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len); + +/* + * Special requests for ide-tape block device strategy routine. + * + * In order to service a character device command, we add special requests to + * the tail of our block device request queue and wait for their completion. + */ +enum { + REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */ + REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */ + REQ_IDETAPE_READ = (1 << 2), + REQ_IDETAPE_WRITE = (1 << 3), +}; + +int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *, + void *, unsigned int); + +int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *); +int ide_do_start_stop(ide_drive_t *, struct gendisk *, int); +int ide_set_media_lock(ide_drive_t *, struct gendisk *, int); +void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *); +void ide_retry_pc(ide_drive_t *drive); + +void ide_prep_sense(ide_drive_t *drive, struct request *rq); +int ide_queue_sense_rq(ide_drive_t *drive, void *special); + +int ide_cd_expiry(ide_drive_t *); + +int ide_cd_get_xferlen(struct request *); + +ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_cmd *); + +ide_startstop_t do_rw_taskfile(ide_drive_t *, struct ide_cmd *); + +void ide_pio_bytes(ide_drive_t *, struct ide_cmd *, unsigned int, unsigned int); + +void ide_finish_cmd(ide_drive_t *, struct ide_cmd *, u8); + +int ide_raw_taskfile(ide_drive_t *, struct ide_cmd *, u8 *, u16); +int ide_no_data_taskfile(ide_drive_t *, struct ide_cmd *); + +int ide_taskfile_ioctl(ide_drive_t *, unsigned long); + +int ide_dev_read_id(ide_drive_t *, u8, u16 *, int); + +extern int ide_driveid_update(ide_drive_t *); +extern int ide_config_drive_speed(ide_drive_t *, u8); +extern u8 eighty_ninty_three (ide_drive_t *); +extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *); + +extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout); + +extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout); + +extern void ide_timer_expiry(unsigned long); +extern irqreturn_t ide_intr(int irq, void *dev_id); +extern void do_ide_request(struct request_queue *); +extern void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq); + +void ide_init_disk(struct gendisk *, ide_drive_t *); + +#ifdef CONFIG_IDEPCI_PCIBUS_ORDER +extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name); +#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME) +#else +#define ide_pci_register_driver(d) pci_register_driver(d) +#endif + +static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev) +{ + if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5) + return 1; + return 0; +} + +void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, + struct ide_hw *, struct ide_hw **); +void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *); + +#ifdef CONFIG_BLK_DEV_IDEDMA_PCI +int ide_pci_set_master(struct pci_dev *, const char *); +unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *); +int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *); +int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *); +#else +static inline int ide_hwif_setup_dma(ide_hwif_t *hwif, + const struct ide_port_info *d) +{ + return -EINVAL; +} +#endif + +struct ide_pci_enablebit { + u8 reg; /* byte pci reg holding the enable-bit */ + u8 mask; /* mask to isolate the enable-bit */ + u8 val; /* value of masked reg when "enabled" */ +}; + +enum { + /* Uses ISA control ports not PCI ones. */ + IDE_HFLAG_ISA_PORTS = (1 << 0), + /* single port device */ + IDE_HFLAG_SINGLE = (1 << 1), + /* don't use legacy PIO blacklist */ + IDE_HFLAG_PIO_NO_BLACKLIST = (1 << 2), + /* set for the second port of QD65xx */ + IDE_HFLAG_QD_2ND_PORT = (1 << 3), + /* use PIO8/9 for prefetch off/on */ + IDE_HFLAG_ABUSE_PREFETCH = (1 << 4), + /* use PIO6/7 for fast-devsel off/on */ + IDE_HFLAG_ABUSE_FAST_DEVSEL = (1 << 5), + /* use 100-102 and 200-202 PIO values to set DMA modes */ + IDE_HFLAG_ABUSE_DMA_MODES = (1 << 6), + /* + * keep DMA setting when programming PIO mode, may be used only + * for hosts which have separate PIO and DMA timings (ie. PMAC) + */ + IDE_HFLAG_SET_PIO_MODE_KEEP_DMA = (1 << 7), + /* program host for the transfer mode after programming device */ + IDE_HFLAG_POST_SET_MODE = (1 << 8), + /* don't program host/device for the transfer mode ("smart" hosts) */ + IDE_HFLAG_NO_SET_MODE = (1 << 9), + /* trust BIOS for programming chipset/device for DMA */ + IDE_HFLAG_TRUST_BIOS_FOR_DMA = (1 << 10), + /* host is CS5510/CS5520 */ + IDE_HFLAG_CS5520 = (1 << 11), + /* ATAPI DMA is unsupported */ + IDE_HFLAG_NO_ATAPI_DMA = (1 << 12), + /* set if host is a "non-bootable" controller */ + IDE_HFLAG_NON_BOOTABLE = (1 << 13), + /* host doesn't support DMA */ + IDE_HFLAG_NO_DMA = (1 << 14), + /* check if host is PCI IDE device before allowing DMA */ + IDE_HFLAG_NO_AUTODMA = (1 << 15), + /* host uses MMIO */ + IDE_HFLAG_MMIO = (1 << 16), + /* no LBA48 */ + IDE_HFLAG_NO_LBA48 = (1 << 17), + /* no LBA48 DMA */ + IDE_HFLAG_NO_LBA48_DMA = (1 << 18), + /* data FIFO is cleared by an error */ + IDE_HFLAG_ERROR_STOPS_FIFO = (1 << 19), + /* serialize ports */ + IDE_HFLAG_SERIALIZE = (1 << 20), + /* host is DTC2278 */ + IDE_HFLAG_DTC2278 = (1 << 21), + /* 4 devices on a single set of I/O ports */ + IDE_HFLAG_4DRIVES = (1 << 22), + /* host is TRM290 */ + IDE_HFLAG_TRM290 = (1 << 23), + /* use 32-bit I/O ops */ + IDE_HFLAG_IO_32BIT = (1 << 24), + /* unmask IRQs */ + IDE_HFLAG_UNMASK_IRQS = (1 << 25), + IDE_HFLAG_BROKEN_ALTSTATUS = (1 << 26), + /* serialize ports if DMA is possible (for sl82c105) */ + IDE_HFLAG_SERIALIZE_DMA = (1 << 27), + /* force host out of "simplex" mode */ + IDE_HFLAG_CLEAR_SIMPLEX = (1 << 28), + /* DSC overlap is unsupported */ + IDE_HFLAG_NO_DSC = (1 << 29), + /* never use 32-bit I/O ops */ + IDE_HFLAG_NO_IO_32BIT = (1 << 30), + /* never unmask IRQs */ + IDE_HFLAG_NO_UNMASK_IRQS = (1 << 31), +}; + +#ifdef CONFIG_BLK_DEV_OFFBOARD +# define IDE_HFLAG_OFF_BOARD 0 +#else +# define IDE_HFLAG_OFF_BOARD IDE_HFLAG_NON_BOOTABLE +#endif + +struct ide_port_info { + char *name; + + int (*init_chipset)(struct pci_dev *); + + void (*get_lock)(irq_handler_t, void *); + void (*release_lock)(void); + + void (*init_iops)(ide_hwif_t *); + void (*init_hwif)(ide_hwif_t *); + int (*init_dma)(ide_hwif_t *, + const struct ide_port_info *); + + const struct ide_tp_ops *tp_ops; + const struct ide_port_ops *port_ops; + const struct ide_dma_ops *dma_ops; + + struct ide_pci_enablebit enablebits[2]; + + hwif_chipset_t chipset; + + u16 max_sectors; /* if < than the default one */ + + u32 host_flags; + + int irq_flags; + + u8 pio_mask; + u8 swdma_mask; + u8 mwdma_mask; + u8 udma_mask; +}; + +int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *); +int ide_pci_init_two(struct pci_dev *, struct pci_dev *, + const struct ide_port_info *, void *); +void ide_pci_remove(struct pci_dev *); + +#ifdef CONFIG_PM +int ide_pci_suspend(struct pci_dev *, pm_message_t); +int ide_pci_resume(struct pci_dev *); +#else +#define ide_pci_suspend NULL +#define ide_pci_resume NULL +#endif + +void ide_map_sg(ide_drive_t *, struct ide_cmd *); +void ide_init_sg_cmd(struct ide_cmd *, unsigned int); + +#define BAD_DMA_DRIVE 0 +#define GOOD_DMA_DRIVE 1 + +struct drive_list_entry { + const char *id_model; + const char *id_firmware; +}; + +int ide_in_drive_list(u16 *, const struct drive_list_entry *); + +#ifdef CONFIG_BLK_DEV_IDEDMA +int ide_dma_good_drive(ide_drive_t *); +int __ide_dma_bad_drive(ide_drive_t *); + +u8 ide_find_dma_mode(ide_drive_t *, u8); + +static inline u8 ide_max_dma_mode(ide_drive_t *drive) +{ + return ide_find_dma_mode(drive, XFER_UDMA_6); +} + +void ide_dma_off_quietly(ide_drive_t *); +void ide_dma_off(ide_drive_t *); +void ide_dma_on(ide_drive_t *); +int ide_set_dma(ide_drive_t *); +void ide_check_dma_crc(ide_drive_t *); +ide_startstop_t ide_dma_intr(ide_drive_t *); + +int ide_allocate_dma_engine(ide_hwif_t *); +void ide_release_dma_engine(ide_hwif_t *); + +int ide_dma_prepare(ide_drive_t *, struct ide_cmd *); +void ide_dma_unmap_sg(ide_drive_t *, struct ide_cmd *); + +#ifdef CONFIG_BLK_DEV_IDEDMA_SFF +int config_drive_for_dma(ide_drive_t *); +int ide_build_dmatable(ide_drive_t *, struct ide_cmd *); +void ide_dma_host_set(ide_drive_t *, int); +int ide_dma_setup(ide_drive_t *, struct ide_cmd *); +extern void ide_dma_start(ide_drive_t *); +int ide_dma_end(ide_drive_t *); +int ide_dma_test_irq(ide_drive_t *); +int ide_dma_sff_timer_expiry(ide_drive_t *); +u8 ide_dma_sff_read_status(ide_hwif_t *); +extern const struct ide_dma_ops sff_dma_ops; +#else +static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; } +#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */ + +void ide_dma_lost_irq(ide_drive_t *); +ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int); + +#else +static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; } +static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; } +static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; } +static inline void ide_dma_off(ide_drive_t *drive) { ; } +static inline void ide_dma_on(ide_drive_t *drive) { ; } +static inline void ide_dma_verbose(ide_drive_t *drive) { ; } +static inline int ide_set_dma(ide_drive_t *drive) { return 1; } +static inline void ide_check_dma_crc(ide_drive_t *drive) { ; } +static inline ide_startstop_t ide_dma_intr(ide_drive_t *drive) { return ide_stopped; } +static inline ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { return ide_stopped; } +static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; } +static inline int ide_dma_prepare(ide_drive_t *drive, + struct ide_cmd *cmd) { return 1; } +static inline void ide_dma_unmap_sg(ide_drive_t *drive, + struct ide_cmd *cmd) { ; } +#endif /* CONFIG_BLK_DEV_IDEDMA */ + +#ifdef CONFIG_BLK_DEV_IDEACPI +int ide_acpi_init(void); +bool ide_port_acpi(ide_hwif_t *hwif); +extern int ide_acpi_exec_tfs(ide_drive_t *drive); +extern void ide_acpi_get_timing(ide_hwif_t *hwif); +extern void ide_acpi_push_timing(ide_hwif_t *hwif); +void ide_acpi_init_port(ide_hwif_t *); +void ide_acpi_port_init_devices(ide_hwif_t *); +extern void ide_acpi_set_state(ide_hwif_t *hwif, int on); +#else +static inline int ide_acpi_init(void) { return 0; } +static inline bool ide_port_acpi(ide_hwif_t *hwif) { return 0; } +static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; } +static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; } +static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; } +static inline void ide_acpi_init_port(ide_hwif_t *hwif) { ; } +static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; } +static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {} +#endif + +void ide_register_region(struct gendisk *); +void ide_unregister_region(struct gendisk *); + +void ide_check_nien_quirk_list(ide_drive_t *); +void ide_undecoded_slave(ide_drive_t *); + +void ide_port_apply_params(ide_hwif_t *); +int ide_sysfs_register_port(ide_hwif_t *); + +struct ide_host *ide_host_alloc(const struct ide_port_info *, struct ide_hw **, + unsigned int); +void ide_host_free(struct ide_host *); +int ide_host_register(struct ide_host *, const struct ide_port_info *, + struct ide_hw **); +int ide_host_add(const struct ide_port_info *, struct ide_hw **, unsigned int, + struct ide_host **); +void ide_host_remove(struct ide_host *); +int ide_legacy_device_add(const struct ide_port_info *, unsigned long); +void ide_port_unregister_devices(ide_hwif_t *); +void ide_port_scan(ide_hwif_t *); + +static inline void *ide_get_hwifdata (ide_hwif_t * hwif) +{ + return hwif->hwif_data; +} + +static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data) +{ + hwif->hwif_data = data; +} + +extern void ide_toggle_bounce(ide_drive_t *drive, int on); + +u64 ide_get_lba_addr(struct ide_cmd *, int); +u8 ide_dump_status(ide_drive_t *, const char *, u8); + +struct ide_timing { + u8 mode; + u8 setup; /* t1 */ + u16 act8b; /* t2 for 8-bit io */ + u16 rec8b; /* t2i for 8-bit io */ + u16 cyc8b; /* t0 for 8-bit io */ + u16 active; /* t2 or tD */ + u16 recover; /* t2i or tK */ + u16 cycle; /* t0 */ + u16 udma; /* t2CYCTYP/2 */ +}; + +enum { + IDE_TIMING_SETUP = (1 << 0), + IDE_TIMING_ACT8B = (1 << 1), + IDE_TIMING_REC8B = (1 << 2), + IDE_TIMING_CYC8B = (1 << 3), + IDE_TIMING_8BIT = IDE_TIMING_ACT8B | IDE_TIMING_REC8B | + IDE_TIMING_CYC8B, + IDE_TIMING_ACTIVE = (1 << 4), + IDE_TIMING_RECOVER = (1 << 5), + IDE_TIMING_CYCLE = (1 << 6), + IDE_TIMING_UDMA = (1 << 7), + IDE_TIMING_ALL = IDE_TIMING_SETUP | IDE_TIMING_8BIT | + IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER | + IDE_TIMING_CYCLE | IDE_TIMING_UDMA, +}; + +struct ide_timing *ide_timing_find_mode(u8); +u16 ide_pio_cycle_time(ide_drive_t *, u8); +void ide_timing_merge(struct ide_timing *, struct ide_timing *, + struct ide_timing *, unsigned int); +int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int); + +#ifdef CONFIG_IDE_XFER_MODE +int ide_scan_pio_blacklist(char *); +const char *ide_xfer_verbose(u8); +int ide_pio_need_iordy(ide_drive_t *, const u8); +int ide_set_pio_mode(ide_drive_t *, u8); +int ide_set_dma_mode(ide_drive_t *, u8); +void ide_set_pio(ide_drive_t *, u8); +int ide_set_xfer_rate(ide_drive_t *, u8); +#else +static inline void ide_set_pio(ide_drive_t *drive, u8 pio) { ; } +static inline int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { return -1; } +#endif + +static inline void ide_set_max_pio(ide_drive_t *drive) +{ + ide_set_pio(drive, 255); +} + +char *ide_media_string(ide_drive_t *); + +extern struct device_attribute ide_dev_attrs[]; +extern struct bus_type ide_bus_type; +extern struct class *ide_port_class; + +static inline void ide_dump_identify(u8 *id) +{ + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0); +} + +static inline int hwif_to_node(ide_hwif_t *hwif) +{ + return hwif->dev ? dev_to_node(hwif->dev) : -1; +} + +static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive) +{ + ide_drive_t *peer = drive->hwif->devices[(drive->dn ^ 1) & 1]; + + return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL; +} + +static inline void *ide_get_drivedata(ide_drive_t *drive) +{ + return drive->drive_data; +} + +static inline void ide_set_drivedata(ide_drive_t *drive, void *data) +{ + drive->drive_data = data; +} + +#define ide_port_for_each_dev(i, dev, port) \ + for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) + +#define ide_port_for_each_present_dev(i, dev, port) \ + for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) \ + if ((dev)->dev_flags & IDE_DFLAG_PRESENT) + +#define ide_host_for_each_port(i, port, host) \ + for ((i) = 0; ((port) = (host)->ports[i]) || (i) < MAX_HOST_PORTS; (i)++) + +#endif /* _IDE_H */ |