diff options
Diffstat (limited to 'drivers/input/tablet/gtco.c')
| -rw-r--r-- | drivers/input/tablet/gtco.c | 1054 |
1 files changed, 1054 insertions, 0 deletions
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c new file mode 100644 index 00000000..8ea6afe2 --- /dev/null +++ b/drivers/input/tablet/gtco.c @@ -0,0 +1,1054 @@ +/* -*- linux-c -*- + +GTCO digitizer USB driver + +Use the err() and dbg() macros from usb.h for system logging + +TO CHECK: Is pressure done right on report 5? + +Copyright (C) 2006 GTCO CalComp + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; version 2 +of the License. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +Permission to use, copy, modify, distribute, and sell this software and its +documentation for any purpose is hereby granted without fee, provided that +the above copyright notice appear in all copies and that both that +copyright notice and this permission notice appear in supporting +documentation, and that the name of GTCO-CalComp not be used in advertising +or publicity pertaining to distribution of the software without specific, +written prior permission. GTCO-CalComp makes no representations about the +suitability of this software for any purpose. It is provided "as is" +without express or implied warranty. + +GTCO-CALCOMP DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +EVENT SHALL GTCO-CALCOMP BE LIABLE FOR ANY SPECIAL, INDIRECT OR +CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, +DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER +TORTIOUS ACTIONS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +PERFORMANCE OF THIS SOFTWARE. + +GTCO CalComp, Inc. +7125 Riverwood Drive +Columbia, MD 21046 + +Jeremy Roberson jroberson@gtcocalcomp.com +Scott Hill shill@gtcocalcomp.com +*/ + + + +/*#define DEBUG*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/usb.h> +#include <asm/uaccess.h> +#include <asm/unaligned.h> +#include <asm/byteorder.h> + + +#include <linux/usb/input.h> + +/* Version with a Major number of 2 is for kernel inclusion only. */ +#define GTCO_VERSION "2.00.0006" + + +/* MACROS */ + +#define VENDOR_ID_GTCO 0x078C +#define PID_400 0x400 +#define PID_401 0x401 +#define PID_1000 0x1000 +#define PID_1001 0x1001 +#define PID_1002 0x1002 + +/* Max size of a single report */ +#define REPORT_MAX_SIZE 10 + + +/* Bitmask whether pen is in range */ +#define MASK_INRANGE 0x20 +#define MASK_BUTTON 0x01F + +#define PATHLENGTH 64 + +/* DATA STRUCTURES */ + +/* Device table */ +static const struct usb_device_id gtco_usbid_table[] = { + { USB_DEVICE(VENDOR_ID_GTCO, PID_400) }, + { USB_DEVICE(VENDOR_ID_GTCO, PID_401) }, + { USB_DEVICE(VENDOR_ID_GTCO, PID_1000) }, + { USB_DEVICE(VENDOR_ID_GTCO, PID_1001) }, + { USB_DEVICE(VENDOR_ID_GTCO, PID_1002) }, + { } +}; +MODULE_DEVICE_TABLE (usb, gtco_usbid_table); + + +/* Structure to hold all of our device specific stuff */ +struct gtco { + + struct input_dev *inputdevice; /* input device struct pointer */ + struct usb_device *usbdev; /* the usb device for this device */ + struct urb *urbinfo; /* urb for incoming reports */ + dma_addr_t buf_dma; /* dma addr of the data buffer*/ + unsigned char * buffer; /* databuffer for reports */ + + char usbpath[PATHLENGTH]; + int openCount; + + /* Information pulled from Report Descriptor */ + u32 usage; + u32 min_X; + u32 max_X; + u32 min_Y; + u32 max_Y; + s8 mintilt_X; + s8 maxtilt_X; + s8 mintilt_Y; + s8 maxtilt_Y; + u32 maxpressure; + u32 minpressure; +}; + + + +/* Code for parsing the HID REPORT DESCRIPTOR */ + +/* From HID1.11 spec */ +struct hid_descriptor +{ + struct usb_descriptor_header header; + __le16 bcdHID; + u8 bCountryCode; + u8 bNumDescriptors; + u8 bDescriptorType; + __le16 wDescriptorLength; +} __attribute__ ((packed)); + + +#define HID_DESCRIPTOR_SIZE 9 +#define HID_DEVICE_TYPE 33 +#define REPORT_DEVICE_TYPE 34 + + +#define PREF_TAG(x) ((x)>>4) +#define PREF_TYPE(x) ((x>>2)&0x03) +#define PREF_SIZE(x) ((x)&0x03) + +#define TYPE_MAIN 0 +#define TYPE_GLOBAL 1 +#define TYPE_LOCAL 2 +#define TYPE_RESERVED 3 + +#define TAG_MAIN_INPUT 0x8 +#define TAG_MAIN_OUTPUT 0x9 +#define TAG_MAIN_FEATURE 0xB +#define TAG_MAIN_COL_START 0xA +#define TAG_MAIN_COL_END 0xC + +#define TAG_GLOB_USAGE 0 +#define TAG_GLOB_LOG_MIN 1 +#define TAG_GLOB_LOG_MAX 2 +#define TAG_GLOB_PHYS_MIN 3 +#define TAG_GLOB_PHYS_MAX 4 +#define TAG_GLOB_UNIT_EXP 5 +#define TAG_GLOB_UNIT 6 +#define TAG_GLOB_REPORT_SZ 7 +#define TAG_GLOB_REPORT_ID 8 +#define TAG_GLOB_REPORT_CNT 9 +#define TAG_GLOB_PUSH 10 +#define TAG_GLOB_POP 11 + +#define TAG_GLOB_MAX 12 + +#define DIGITIZER_USAGE_TIP_PRESSURE 0x30 +#define DIGITIZER_USAGE_TILT_X 0x3D +#define DIGITIZER_USAGE_TILT_Y 0x3E + + +/* + * This is an abbreviated parser for the HID Report Descriptor. We + * know what devices we are talking to, so this is by no means meant + * to be generic. We can make some safe assumptions: + * + * - We know there are no LONG tags, all short + * - We know that we have no MAIN Feature and MAIN Output items + * - We know what the IRQ reports are supposed to look like. + * + * The main purpose of this is to use the HID report desc to figure + * out the mins and maxs of the fields in the IRQ reports. The IRQ + * reports for 400/401 change slightly if the max X is bigger than 64K. + * + */ +static void parse_hid_report_descriptor(struct gtco *device, char * report, + int length) +{ + int x, i = 0; + + /* Tag primitive vars */ + __u8 prefix; + __u8 size; + __u8 tag; + __u8 type; + __u8 data = 0; + __u16 data16 = 0; + __u32 data32 = 0; + + /* For parsing logic */ + int inputnum = 0; + __u32 usage = 0; + + /* Global Values, indexed by TAG */ + __u32 globalval[TAG_GLOB_MAX]; + __u32 oldval[TAG_GLOB_MAX]; + + /* Debug stuff */ + char maintype = 'x'; + char globtype[12]; + int indent = 0; + char indentstr[10] = ""; + + + dbg("======>>>>>>PARSE<<<<<<======"); + + /* Walk this report and pull out the info we need */ + while (i < length) { + prefix = report[i]; + + /* Skip over prefix */ + i++; + + /* Determine data size and save the data in the proper variable */ + size = PREF_SIZE(prefix); + switch (size) { + case 1: + data = report[i]; + break; + case 2: + data16 = get_unaligned_le16(&report[i]); + break; + case 3: + size = 4; + data32 = get_unaligned_le32(&report[i]); + break; + } + + /* Skip size of data */ + i += size; + + /* What we do depends on the tag type */ + tag = PREF_TAG(prefix); + type = PREF_TYPE(prefix); + switch (type) { + case TYPE_MAIN: + strcpy(globtype, ""); + switch (tag) { + + case TAG_MAIN_INPUT: + /* + * The INPUT MAIN tag signifies this is + * information from a report. We need to + * figure out what it is and store the + * min/max values + */ + + maintype = 'I'; + if (data == 2) + strcpy(globtype, "Variable"); + else if (data == 3) + strcpy(globtype, "Var|Const"); + + dbg("::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits", + globalval[TAG_GLOB_REPORT_ID], inputnum, + globalval[TAG_GLOB_LOG_MAX], globalval[TAG_GLOB_LOG_MAX], + globalval[TAG_GLOB_LOG_MIN], globalval[TAG_GLOB_LOG_MIN], + globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]); + + + /* + We can assume that the first two input items + are always the X and Y coordinates. After + that, we look for everything else by + local usage value + */ + switch (inputnum) { + case 0: /* X coord */ + dbg("GER: X Usage: 0x%x", usage); + if (device->max_X == 0) { + device->max_X = globalval[TAG_GLOB_LOG_MAX]; + device->min_X = globalval[TAG_GLOB_LOG_MIN]; + } + break; + + case 1: /* Y coord */ + dbg("GER: Y Usage: 0x%x", usage); + if (device->max_Y == 0) { + device->max_Y = globalval[TAG_GLOB_LOG_MAX]; + device->min_Y = globalval[TAG_GLOB_LOG_MIN]; + } + break; + + default: + /* Tilt X */ + if (usage == DIGITIZER_USAGE_TILT_X) { + if (device->maxtilt_X == 0) { + device->maxtilt_X = globalval[TAG_GLOB_LOG_MAX]; + device->mintilt_X = globalval[TAG_GLOB_LOG_MIN]; + } + } + + /* Tilt Y */ + if (usage == DIGITIZER_USAGE_TILT_Y) { + if (device->maxtilt_Y == 0) { + device->maxtilt_Y = globalval[TAG_GLOB_LOG_MAX]; + device->mintilt_Y = globalval[TAG_GLOB_LOG_MIN]; + } + } + + /* Pressure */ + if (usage == DIGITIZER_USAGE_TIP_PRESSURE) { + if (device->maxpressure == 0) { + device->maxpressure = globalval[TAG_GLOB_LOG_MAX]; + device->minpressure = globalval[TAG_GLOB_LOG_MIN]; + } + } + + break; + } + + inputnum++; + break; + + case TAG_MAIN_OUTPUT: + maintype = 'O'; + break; + + case TAG_MAIN_FEATURE: + maintype = 'F'; + break; + + case TAG_MAIN_COL_START: + maintype = 'S'; + + if (data == 0) { + dbg("======>>>>>> Physical"); + strcpy(globtype, "Physical"); + } else + dbg("======>>>>>>"); + + /* Indent the debug output */ + indent++; + for (x = 0; x < indent; x++) + indentstr[x] = '-'; + indentstr[x] = 0; + + /* Save global tags */ + for (x = 0; x < TAG_GLOB_MAX; x++) + oldval[x] = globalval[x]; + + break; + + case TAG_MAIN_COL_END: + dbg("<<<<<<======"); + maintype = 'E'; + indent--; + for (x = 0; x < indent; x++) + indentstr[x] = '-'; + indentstr[x] = 0; + + /* Copy global tags back */ + for (x = 0; x < TAG_GLOB_MAX; x++) + globalval[x] = oldval[x]; + + break; + } + + switch (size) { + case 1: + dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x", + indentstr, tag, maintype, size, globtype, data); + break; + + case 2: + dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x", + indentstr, tag, maintype, size, globtype, data16); + break; + + case 4: + dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x", + indentstr, tag, maintype, size, globtype, data32); + break; + } + break; + + case TYPE_GLOBAL: + switch (tag) { + case TAG_GLOB_USAGE: + /* + * First time we hit the global usage tag, + * it should tell us the type of device + */ + if (device->usage == 0) + device->usage = data; + + strcpy(globtype, "USAGE"); + break; + + case TAG_GLOB_LOG_MIN: + strcpy(globtype, "LOG_MIN"); + break; + + case TAG_GLOB_LOG_MAX: + strcpy(globtype, "LOG_MAX"); + break; + + case TAG_GLOB_PHYS_MIN: + strcpy(globtype, "PHYS_MIN"); + break; + + case TAG_GLOB_PHYS_MAX: + strcpy(globtype, "PHYS_MAX"); + break; + + case TAG_GLOB_UNIT_EXP: + strcpy(globtype, "EXP"); + break; + + case TAG_GLOB_UNIT: + strcpy(globtype, "UNIT"); + break; + + case TAG_GLOB_REPORT_SZ: + strcpy(globtype, "REPORT_SZ"); + break; + + case TAG_GLOB_REPORT_ID: + strcpy(globtype, "REPORT_ID"); + /* New report, restart numbering */ + inputnum = 0; + break; + + case TAG_GLOB_REPORT_CNT: + strcpy(globtype, "REPORT_CNT"); + break; + + case TAG_GLOB_PUSH: + strcpy(globtype, "PUSH"); + break; + + case TAG_GLOB_POP: + strcpy(globtype, "POP"); + break; + } + + /* Check to make sure we have a good tag number + so we don't overflow array */ + if (tag < TAG_GLOB_MAX) { + switch (size) { + case 1: + dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x", + indentstr, globtype, tag, size, data); + globalval[tag] = data; + break; + + case 2: + dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x", + indentstr, globtype, tag, size, data16); + globalval[tag] = data16; + break; + + case 4: + dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x", + indentstr, globtype, tag, size, data32); + globalval[tag] = data32; + break; + } + } else { + dbg("%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d ", + indentstr, tag, size); + } + break; + + case TYPE_LOCAL: + switch (tag) { + case TAG_GLOB_USAGE: + strcpy(globtype, "USAGE"); + /* Always 1 byte */ + usage = data; + break; + + case TAG_GLOB_LOG_MIN: + strcpy(globtype, "MIN"); + break; + + case TAG_GLOB_LOG_MAX: + strcpy(globtype, "MAX"); + break; + + default: + strcpy(globtype, "UNKNOWN"); + break; + } + + switch (size) { + case 1: + dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x", + indentstr, tag, globtype, size, data); + break; + + case 2: + dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x", + indentstr, tag, globtype, size, data16); + break; + + case 4: + dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x", + indentstr, tag, globtype, size, data32); + break; + } + + break; + } + } +} + +/* INPUT DRIVER Routines */ + +/* + * Called when opening the input device. This will submit the URB to + * the usb system so we start getting reports + */ +static int gtco_input_open(struct input_dev *inputdev) +{ + struct gtco *device = input_get_drvdata(inputdev); + + device->urbinfo->dev = device->usbdev; + if (usb_submit_urb(device->urbinfo, GFP_KERNEL)) + return -EIO; + + return 0; +} + +/* + * Called when closing the input device. This will unlink the URB + */ +static void gtco_input_close(struct input_dev *inputdev) +{ + struct gtco *device = input_get_drvdata(inputdev); + + usb_kill_urb(device->urbinfo); +} + + +/* + * Setup input device capabilities. Tell the input system what this + * device is capable of generating. + * + * This information is based on what is read from the HID report and + * placed in the struct gtco structure + * + */ +static void gtco_setup_caps(struct input_dev *inputdev) +{ + struct gtco *device = input_get_drvdata(inputdev); + + /* Which events */ + inputdev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) | + BIT_MASK(EV_MSC); + + /* Misc event menu block */ + inputdev->mscbit[0] = BIT_MASK(MSC_SCAN) | BIT_MASK(MSC_SERIAL) | + BIT_MASK(MSC_RAW); + + /* Absolute values based on HID report info */ + input_set_abs_params(inputdev, ABS_X, device->min_X, device->max_X, + 0, 0); + input_set_abs_params(inputdev, ABS_Y, device->min_Y, device->max_Y, + 0, 0); + + /* Proximity */ + input_set_abs_params(inputdev, ABS_DISTANCE, 0, 1, 0, 0); + + /* Tilt & pressure */ + input_set_abs_params(inputdev, ABS_TILT_X, device->mintilt_X, + device->maxtilt_X, 0, 0); + input_set_abs_params(inputdev, ABS_TILT_Y, device->mintilt_Y, + device->maxtilt_Y, 0, 0); + input_set_abs_params(inputdev, ABS_PRESSURE, device->minpressure, + device->maxpressure, 0, 0); + + /* Transducer */ + input_set_abs_params(inputdev, ABS_MISC, 0, 0xFF, 0, 0); +} + +/* USB Routines */ + +/* + * URB callback routine. Called when we get IRQ reports from the + * digitizer. + * + * This bridges the USB and input device worlds. It generates events + * on the input device based on the USB reports. + */ +static void gtco_urb_callback(struct urb *urbinfo) +{ + struct gtco *device = urbinfo->context; + struct input_dev *inputdev; + int rc; + u32 val = 0; + s8 valsigned = 0; + char le_buffer[2]; + + inputdev = device->inputdevice; + + /* Was callback OK? */ + if (urbinfo->status == -ECONNRESET || + urbinfo->status == -ENOENT || + urbinfo->status == -ESHUTDOWN) { + + /* Shutdown is occurring. Return and don't queue up any more */ + return; + } + + if (urbinfo->status != 0) { + /* + * Some unknown error. Hopefully temporary. Just go and + * requeue an URB + */ + goto resubmit; + } + + /* + * Good URB, now process + */ + + /* PID dependent when we interpret the report */ + if (inputdev->id.product == PID_1000 || + inputdev->id.product == PID_1001 || + inputdev->id.product == PID_1002) { + + /* + * Switch on the report ID + * Conveniently, the reports have more information, the higher + * the report number. We can just fall through the case + * statements if we start with the highest number report + */ + switch (device->buffer[0]) { + case 5: + /* Pressure is 9 bits */ + val = ((u16)(device->buffer[8]) << 1); + val |= (u16)(device->buffer[7] >> 7); + input_report_abs(inputdev, ABS_PRESSURE, + device->buffer[8]); + + /* Mask out the Y tilt value used for pressure */ + device->buffer[7] = (u8)((device->buffer[7]) & 0x7F); + + /* Fall thru */ + case 4: + /* Tilt */ + + /* Sign extend these 7 bit numbers. */ + if (device->buffer[6] & 0x40) + device->buffer[6] |= 0x80; + + if (device->buffer[7] & 0x40) + device->buffer[7] |= 0x80; + + + valsigned = (device->buffer[6]); + input_report_abs(inputdev, ABS_TILT_X, (s32)valsigned); + + valsigned = (device->buffer[7]); + input_report_abs(inputdev, ABS_TILT_Y, (s32)valsigned); + + /* Fall thru */ + case 2: + case 3: + /* Convert buttons, only 5 bits possible */ + val = (device->buffer[5]) & MASK_BUTTON; + + /* We don't apply any meaning to the bitmask, + just report */ + input_event(inputdev, EV_MSC, MSC_SERIAL, val); + + /* Fall thru */ + case 1: + /* All reports have X and Y coords in the same place */ + val = get_unaligned_le16(&device->buffer[1]); + input_report_abs(inputdev, ABS_X, val); + + val = get_unaligned_le16(&device->buffer[3]); + input_report_abs(inputdev, ABS_Y, val); + + /* Ditto for proximity bit */ + val = device->buffer[5] & MASK_INRANGE ? 1 : 0; + input_report_abs(inputdev, ABS_DISTANCE, val); + + /* Report 1 is an exception to how we handle buttons */ + /* Buttons are an index, not a bitmask */ + if (device->buffer[0] == 1) { + + /* + * Convert buttons, 5 bit index + * Report value of index set as one, + * the rest as 0 + */ + val = device->buffer[5] & MASK_BUTTON; + dbg("======>>>>>>REPORT 1: val 0x%X(%d)", + val, val); + + /* + * We don't apply any meaning to the button + * index, just report it + */ + input_event(inputdev, EV_MSC, MSC_SERIAL, val); + } + break; + + case 7: + /* Menu blocks */ + input_event(inputdev, EV_MSC, MSC_SCAN, + device->buffer[1]); + break; + } + } + + /* Other pid class */ + if (inputdev->id.product == PID_400 || + inputdev->id.product == PID_401) { + + /* Report 2 */ + if (device->buffer[0] == 2) { + /* Menu blocks */ + input_event(inputdev, EV_MSC, MSC_SCAN, device->buffer[1]); + } + + /* Report 1 */ + if (device->buffer[0] == 1) { + char buttonbyte; + + /* IF X max > 64K, we still a bit from the y report */ + if (device->max_X > 0x10000) { + + val = (u16)(((u16)(device->buffer[2] << 8)) | (u8)device->buffer[1]); + val |= (u32)(((u8)device->buffer[3] & 0x1) << 16); + + input_report_abs(inputdev, ABS_X, val); + + le_buffer[0] = (u8)((u8)(device->buffer[3]) >> 1); + le_buffer[0] |= (u8)((device->buffer[3] & 0x1) << 7); + + le_buffer[1] = (u8)(device->buffer[4] >> 1); + le_buffer[1] |= (u8)((device->buffer[5] & 0x1) << 7); + + val = get_unaligned_le16(le_buffer); + input_report_abs(inputdev, ABS_Y, val); + + /* + * Shift the button byte right by one to + * make it look like the standard report + */ + buttonbyte = device->buffer[5] >> 1; + } else { + + val = get_unaligned_le16(&device->buffer[1]); + input_report_abs(inputdev, ABS_X, val); + + val = get_unaligned_le16(&device->buffer[3]); + input_report_abs(inputdev, ABS_Y, val); + + buttonbyte = device->buffer[5]; + } + + /* BUTTONS and PROXIMITY */ + val = buttonbyte & MASK_INRANGE ? 1 : 0; + input_report_abs(inputdev, ABS_DISTANCE, val); + + /* Convert buttons, only 4 bits possible */ + val = buttonbyte & 0x0F; +#ifdef USE_BUTTONS + for (i = 0; i < 5; i++) + input_report_key(inputdev, BTN_DIGI + i, val & (1 << i)); +#else + /* We don't apply any meaning to the bitmask, just report */ + input_event(inputdev, EV_MSC, MSC_SERIAL, val); +#endif + + /* TRANSDUCER */ + input_report_abs(inputdev, ABS_MISC, device->buffer[6]); + } + } + + /* Everybody gets report ID's */ + input_event(inputdev, EV_MSC, MSC_RAW, device->buffer[0]); + + /* Sync it up */ + input_sync(inputdev); + + resubmit: + rc = usb_submit_urb(urbinfo, GFP_ATOMIC); + if (rc != 0) + err("usb_submit_urb failed rc=0x%x", rc); +} + +/* + * The probe routine. This is called when the kernel find the matching USB + * vendor/product. We do the following: + * + * - Allocate mem for a local structure to manage the device + * - Request a HID Report Descriptor from the device and parse it to + * find out the device parameters + * - Create an input device and assign it attributes + * - Allocate an URB so the device can talk to us when the input + * queue is open + */ +static int gtco_probe(struct usb_interface *usbinterface, + const struct usb_device_id *id) +{ + + struct gtco *gtco; + struct input_dev *input_dev; + struct hid_descriptor *hid_desc; + char *report; + int result = 0, retry; + int error; + struct usb_endpoint_descriptor *endpoint; + + /* Allocate memory for device structure */ + gtco = kzalloc(sizeof(struct gtco), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!gtco || !input_dev) { + err("No more memory"); + error = -ENOMEM; + goto err_free_devs; + } + + /* Set pointer to the input device */ + gtco->inputdevice = input_dev; + + /* Save interface information */ + gtco->usbdev = usb_get_dev(interface_to_usbdev(usbinterface)); + + /* Allocate some data for incoming reports */ + gtco->buffer = usb_alloc_coherent(gtco->usbdev, REPORT_MAX_SIZE, + GFP_KERNEL, >co->buf_dma); + if (!gtco->buffer) { + err("No more memory for us buffers"); + error = -ENOMEM; + goto err_free_devs; + } + + /* Allocate URB for reports */ + gtco->urbinfo = usb_alloc_urb(0, GFP_KERNEL); + if (!gtco->urbinfo) { + err("Failed to allocate URB"); + error = -ENOMEM; + goto err_free_buf; + } + + /* + * The endpoint is always altsetting 0, we know this since we know + * this device only has one interrupt endpoint + */ + endpoint = &usbinterface->altsetting[0].endpoint[0].desc; + + /* Some debug */ + dbg("gtco # interfaces: %d", usbinterface->num_altsetting); + dbg("num endpoints: %d", usbinterface->cur_altsetting->desc.bNumEndpoints); + dbg("interface class: %d", usbinterface->cur_altsetting->desc.bInterfaceClass); + dbg("endpoint: attribute:0x%x type:0x%x", endpoint->bmAttributes, endpoint->bDescriptorType); + if (usb_endpoint_xfer_int(endpoint)) + dbg("endpoint: we have interrupt endpoint\n"); + + dbg("endpoint extra len:%d ", usbinterface->altsetting[0].extralen); + + /* + * Find the HID descriptor so we can find out the size of the + * HID report descriptor + */ + if (usb_get_extra_descriptor(usbinterface->cur_altsetting, + HID_DEVICE_TYPE, &hid_desc) != 0){ + err("Can't retrieve exta USB descriptor to get hid report descriptor length"); + error = -EIO; + goto err_free_urb; + } + + dbg("Extra descriptor success: type:%d len:%d", + hid_desc->bDescriptorType, hid_desc->wDescriptorLength); + + report = kzalloc(le16_to_cpu(hid_desc->wDescriptorLength), GFP_KERNEL); + if (!report) { + err("No more memory for report"); + error = -ENOMEM; + goto err_free_urb; + } + + /* Couple of tries to get reply */ + for (retry = 0; retry < 3; retry++) { + result = usb_control_msg(gtco->usbdev, + usb_rcvctrlpipe(gtco->usbdev, 0), + USB_REQ_GET_DESCRIPTOR, + USB_RECIP_INTERFACE | USB_DIR_IN, + REPORT_DEVICE_TYPE << 8, + 0, /* interface */ + report, + le16_to_cpu(hid_desc->wDescriptorLength), + 5000); /* 5 secs */ + + dbg("usb_control_msg result: %d", result); + if (result == le16_to_cpu(hid_desc->wDescriptorLength)) { + parse_hid_report_descriptor(gtco, report, result); + break; + } + } + + kfree(report); + + /* If we didn't get the report, fail */ + if (result != le16_to_cpu(hid_desc->wDescriptorLength)) { + err("Failed to get HID Report Descriptor of size: %d", + hid_desc->wDescriptorLength); + error = -EIO; + goto err_free_urb; + } + + /* Create a device file node */ + usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath)); + strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath)); + + /* Set Input device functions */ + input_dev->open = gtco_input_open; + input_dev->close = gtco_input_close; + + /* Set input device information */ + input_dev->name = "GTCO_CalComp"; + input_dev->phys = gtco->usbpath; + + input_set_drvdata(input_dev, gtco); + + /* Now set up all the input device capabilities */ + gtco_setup_caps(input_dev); + + /* Set input device required ID information */ + usb_to_input_id(gtco->usbdev, &input_dev->id); + input_dev->dev.parent = &usbinterface->dev; + + /* Setup the URB, it will be posted later on open of input device */ + endpoint = &usbinterface->altsetting[0].endpoint[0].desc; + + usb_fill_int_urb(gtco->urbinfo, + gtco->usbdev, + usb_rcvintpipe(gtco->usbdev, + endpoint->bEndpointAddress), + gtco->buffer, + REPORT_MAX_SIZE, + gtco_urb_callback, + gtco, + endpoint->bInterval); + + gtco->urbinfo->transfer_dma = gtco->buf_dma; + gtco->urbinfo->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* Save gtco pointer in USB interface gtco */ + usb_set_intfdata(usbinterface, gtco); + + /* All done, now register the input device */ + error = input_register_device(input_dev); + if (error) + goto err_free_urb; + + return 0; + + err_free_urb: + usb_free_urb(gtco->urbinfo); + err_free_buf: + usb_free_coherent(gtco->usbdev, REPORT_MAX_SIZE, + gtco->buffer, gtco->buf_dma); + err_free_devs: + input_free_device(input_dev); + kfree(gtco); + return error; +} + +/* + * This function is a standard USB function called when the USB device + * is disconnected. We will get rid of the URV, de-register the input + * device, and free up allocated memory + */ +static void gtco_disconnect(struct usb_interface *interface) +{ + /* Grab private device ptr */ + struct gtco *gtco = usb_get_intfdata(interface); + + /* Now reverse all the registration stuff */ + if (gtco) { + input_unregister_device(gtco->inputdevice); + usb_kill_urb(gtco->urbinfo); + usb_free_urb(gtco->urbinfo); + usb_free_coherent(gtco->usbdev, REPORT_MAX_SIZE, + gtco->buffer, gtco->buf_dma); + kfree(gtco); + } + + dev_info(&interface->dev, "gtco driver disconnected\n"); +} + +/* STANDARD MODULE LOAD ROUTINES */ + +static struct usb_driver gtco_driverinfo_table = { + .name = "gtco", + .id_table = gtco_usbid_table, + .probe = gtco_probe, + .disconnect = gtco_disconnect, +}; + +/* + * Register this module with the USB subsystem + */ +static int __init gtco_init(void) +{ + int error; + + error = usb_register(>co_driverinfo_table); + if (error) { + err("usb_register() failed rc=0x%x", error); + return error; + } + + printk("GTCO usb driver version: %s", GTCO_VERSION); + return 0; +} + +/* + * Deregister this module with the USB subsystem + */ +static void __exit gtco_exit(void) +{ + usb_deregister(>co_driverinfo_table); +} + +module_init(gtco_init); +module_exit(gtco_exit); + +MODULE_DESCRIPTION("GTCO digitizer USB driver"); +MODULE_LICENSE("GPL"); |