diff options
Diffstat (limited to 'arch/arm/plat-mxc/include/mach/regs-usbphy-others.h')
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/regs-usbphy-others.h | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/arch/arm/plat-mxc/include/mach/regs-usbphy-others.h b/arch/arm/plat-mxc/include/mach/regs-usbphy-others.h new file mode 100644 index 00000000..7d8d1ff6 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/regs-usbphy-others.h @@ -0,0 +1,161 @@ +/* + * Copyright (C) 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_MXC_USB_PHY_OTHERS_H__ +#define __ASM_ARCH_MXC_USB_PHY_OTHERS_H__ + +/* + * This file describes the registers of chipidea's phy + * This file can be used for i.MX1x, i.MX21. i.MX25. i.MX3x. i.MX5x. + */ + +#define USBCTRL USBOTHER_REG(0x00) /* USB Control register */ +#define USB_OTG_MIRROR USBOTHER_REG(0x04) /* USB OTG mirror register */ +#define USB_PHY_CTR_FUNC USBOTHER_REG(0x08) /* OTG UTMI PHY Function Control register */ +#define USB_PHY_CTR_FUNC2 USBOTHER_REG(0x0c) /* OTG UTMI PHY Function Control register */ +#define USB_CTRL_1 USBOTHER_REG(0x10) /* USB Cotrol Register 1*/ +#define USBCTRL_HOST2 USBOTHER_REG(0x14) /* USB Cotrol Register 1*/ +#define USBCTRL_HOST3 USBOTHER_REG(0x18) /* USB Cotrol Register 1*/ +#define USBH1_PHY_CTRL0 USBOTHER_REG(0x1c) /* USB Cotrol Register 1*/ +#define USBH1_PHY_CTRL1 USBOTHER_REG(0x20) /* USB Cotrol Register 1*/ +#define USB_CLKONOFF_CTRL USBOTHER_REG(0x24) /* USB Clock on/off Control Register */ + +/* + * register bits + */ + +/* USBCTRL */ +#define UCTRL_OWIR (1 << 31) /* OTG wakeup intr request received */ +#define UCTRL_OSIC_MASK (3 << 29) /* OTG Serial Interface Config: */ +#define UCTRL_OSIC_DU6 (0 << 29) /* Differential/unidirectional 6 wire */ +#define UCTRL_OSIC_DB4 (1 << 29) /* Differential/bidirectional 4 wire */ +#define UCTRL_OSIC_SU6 (2 << 29) /* single-ended/unidirectional 6 wire */ +#define UCTRL_OSIC_SB3 (3 << 29) /* single-ended/bidirectional 3 wire */ +#define UCTRL_OUIE (1 << 28) /* OTG ULPI intr enable */ +#define UCTRL_OWIE (1 << 27) /* OTG wakeup intr enable */ +#define UCTRL_OBPVAL_RXDP (1 << 26) /* OTG RxDp status in bypass mode */ +#define UCTRL_OBPVAL_RXDM (1 << 25) /* OTG RxDm status in bypass mode */ +#define UCTRL_OPM (1 << 24) /* OTG power mask */ +#define UCTRL_O_PWR_POL (1 << 24) /* OTG power pin polarity */ +#ifdef CONFIG_ARCH_MX5 +#define UCTRL_H2WIR (1 << 17) /* HOST2 wakeup intr request received */ +#else +#define UCTRL_H2WIR (1 << 23) /* HOST2 wakeup intr request received */ +#endif +#define UCTRL_H2SIC_MASK (3 << 21) /* HOST2 Serial Interface Config: */ +#define UCTRL_H2SIC_DU6 (0 << 21) /* Differential/unidirectional 6 wire */ +#define UCTRL_H2SIC_DB4 (1 << 21) /* Differential/bidirectional 4 wire */ +#define UCTRL_H2SIC_SU6 (2 << 21) /* single-ended/unidirectional 6 wire */ +#define UCTRL_H2SIC_SB3 (3 << 21) /* single-ended/bidirectional 3 wire */ + +#ifdef CONFIG_ARCH_MX5 +#define UCTRL_H2UIE (1 << 8) /* HOST2 ULPI intr enable */ +#define UCTRL_H2WIE (1 << 7) /* HOST2 wakeup intr enable */ +#define UCTRL_H2PP 0 /* Power Polarity for uh2 */ +#define UCTRL_H2PM (1 << 4) /* HOST2 power mask */ +#else +#define UCTRL_H2UIE (1 << 20) /* HOST2 ULPI intr enable */ +#define UCTRL_H2WIE (1 << 19) /* HOST2 wakeup intr enable */ +#define UCTRL_H2PP (1 << 18) /* Power Polarity for uh2 */ +#define UCTRL_H2PM (1 << 16) /* HOST2 power mask */ +#endif +#define UCTRL_H2OVBWK_EN (1 << 6) /* OTG VBUS Wakeup Enable */ +#define UCTRL_H2OIDWK_EN (1 << 5) /* OTG ID Wakeup Enable */ + +#define UCTRL_H1WIR (1 << 15) /* HOST1 wakeup intr request received */ +#define UCTRL_H1SIC_MASK (3 << 13) /* HOST1 Serial Interface Config: */ +#define UCTRL_H1SIC_DU6 (0 << 13) /* Differential/unidirectional 6 wire */ +#define UCTRL_H1SIC_DB4 (1 << 13) /* Differential/bidirectional 4 wire */ +#define UCTRL_H1SIC_SU6 (2 << 13) /* single-ended/unidirectional 6 wire */ +#define UCTRL_H1SIC_SB3 (3 << 13) /* single-ended/bidirectional 3 wire */ +#define UCTRL_OLOCKD (1 << 13) /* otg lock disable */ +#define UCTRL_H2LOCKD (1 << 12) /* HOST2 lock disable */ +#define UCTRL_H1UIE (1 << 12) /* Host1 ULPI interrupt enable */ + +#if defined(CONFIG_ARCH_MX37) +/* VBUS wakeup enable, UTMI only */ +#define UCTRL_VBUS_WKUP_EN (1 << 12) +#elif defined(CONFIG_ARCH_MX25) || defined(CONFIG_ARCH_MX35) +#define UCTRL_VBUS_WKUP_EN (1 << 15) +#endif + +#define UCTRL_PP (1 << 11) /* power polarity bit */ +#define UCTRL_H1WIE (1 << 11) /* HOST1 wakeup intr enable */ +#define UCTRL_H1BPVAL_RXDP (1 << 10) /* HOST1 RxDp status in bypass mode */ +#define UCTRL_XCSO (1 << 10) /* Xcvr Clock Select for OTG port */ +#define UCTRL_H1BPVAL_RXDM (1 << 9) /* HOST1 RxDm status in bypass mode */ +#define UCTRL_XCSH2 (1 << 9) /* Xcvr Clock Select for Host port */ +#define UCTRL_H1PM (1 << 8) /* HOST1 power mask */ +#define UCTRL_IP_PULIDP (1 << 8) /* Ipp_Puimpel_Pullup_Dp */ + +#define UCTRL_IP_PUE_UP (1 << 7) /* ipp_pue_pullup_dp */ +#define UCTRL_IP_PUE_DOWN (1 << 6) /* ipp_pue_pulldwn_dpdm */ +#define UCTRL_H2DT (1 << 5) /* HOST2 TLL disabled */ +#define UCTRL_H1DT (1 << 4) /* HOST1 TLL disabled */ +#define UCTRL_USBTE (1 << 4) /* USBT Transceiver enable */ +#define UCTRL_OCPOL (1 << 3) /* OverCurrent Polarity */ +#define UCTRL_OCE (1 << 2) /* OverCurrent Enable */ +#define UCTRL_H2OCPOL (1 << 2) /* OverCurrent Polarity of Host2 */ +#define UCTRL_H2OCS (1 << 1) /* Host OverCurrent State */ +#define UCTRL_BPE (1 << 0) /* bypass mode enable */ +#define UCTRL_OTD (1 << 0) /* OTG TLL Disable */ +#define UCTRL_OOCS (1 << 0) /* OTG OverCurrent State */ + +/* OTG_MIRROR */ +#define OTGM_SESEND (1 << 4) /* B device session end */ +#define OTGM_VBUSVAL (1 << 3) /* Vbus valid */ +#define OTGM_BSESVLD (1 << 2) /* B session Valid */ +#define OTGM_ASESVLD (1 << 1) /* A session Valid */ +#define OTGM_IDIDG (1 << 0) /* OTG ID pin status */ + /* 1=high: Operate as B-device */ + /* 0=low : Operate as A-device */ + +/* USB_PHY_CTRL_FUNC */ +/* PHY control0 Register Bit Masks */ +#define USB_UTMI_PHYCTRL_CONF2 (1 << 26) + +#define USB_UTMI_PHYCTRL_UTMI_ENABLE (1 << 24) +#define USB_UTMI_PHYCTRL_CHGRDETEN (1 << 24) /* Enable Charger Detector */ +#define USB_UTMI_PHYCTRL_CHGRDETON (1 << 23) /* Charger Detector Power On Control */ +#define USB_UTMI_PHYCTRL_OC_POL (1 << 9) /* OTG Polarity of Overcurrent */ +#define USB_UTMI_PHYCTRL_OC_DIS (1 << 8) /* OTG Disable Overcurrent Event */ +#define USB_UH1_OC_DIS (1 << 5) /* UH1 Disable Overcurrent Event */ +#define USB_UH1_OC_POL (1 << 6) /* UH1 Polarity of OC,Low active */ +/* USB_PHY_CTRL_FUNC2*/ +#define USB_UTMI_PHYCTRL2_PLLDIV_MASK 0x3 +#define USB_UTMI_PHYCTRL2_PLLDIV_SHIFT 0 +#define USB_UTMI_PHYCTRL2_HSDEVSEL_MASK 0x3 +#define USB_UTMI_PHYCTRL2_HSDEVSEL_SHIFT 19 + +/* USB_CTRL_1 */ +#define USB_CTRL_UH1_EXT_CLK_EN (1 << 25) +#define USB_CTRL_UH2_EXT_CLK_EN (1 << 26) +#define USB_CTRL_UH2_CLK_FROM_ULPI_PHY (1 << 2) +/* ULPIVIEW register bits */ +#define ULPIVW_OFF (0x170) +#define ULPIVW_WU (1 << 31) /* Wakeup */ +#define ULPIVW_RUN (1 << 30) /* read/write run */ +#define ULPIVW_WRITE (1 << 29) /* 0=read 1=write */ +#define ULPIVW_SS (1 << 27) /* SyncState */ +#define ULPIVW_PORT_MASK 0x07 /* Port field */ +#define ULPIVW_PORT_SHIFT 24 +#define ULPIVW_ADDR_MASK 0xFF /* data address field */ +#define ULPIVW_ADDR_SHIFT 16 +#define ULPIVW_RDATA_MASK 0xFF /* read data field */ +#define ULPIVW_RDATA_SHIFT 8 +#define ULPIVW_WDATA_MASK 0xFF /* write data field */ +#define ULPIVW_WDATA_SHIFT 0 + +/* USB Clock on/off Control Register */ +#define OTG_AHBCLK_OFF (0x1<<17) /* 1: OFF */ +#define H1_AHBCLK_OFF (0x1<<18) /* 1: OFF */ +#endif /* __ASM_ARCH_MXC_USB_PHY_OTHERS_H__ */ |