diff options
Diffstat (limited to 'arch/arm/mach-ux500/devices-db8500.c')
| -rw-r--r-- | arch/arm/mach-ux500/devices-db8500.c | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c new file mode 100644 index 00000000..73b17404 --- /dev/null +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -0,0 +1,197 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl022.h> + +#include <plat/ste_dma40.h> + +#include <mach/hardware.h> +#include <mach/setup.h> + +#include "ste-dma40-db8500.h" + +static struct resource dma40_resources[] = { + [0] = { + .start = U8500_DMA_BASE, + .end = U8500_DMA_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "base", + }, + [1] = { + .start = U8500_DMA_LCPA_BASE, + .end = U8500_DMA_LCPA_BASE + 2 * SZ_1K - 1, + .flags = IORESOURCE_MEM, + .name = "lcpa", + }, + [2] = { + .start = IRQ_DB8500_DMA, + .end = IRQ_DB8500_DMA, + .flags = IORESOURCE_IRQ, + } +}; + +/* Default configuration for physcial memcpy */ +struct stedma40_chan_cfg dma40_memcpy_conf_phy = { + .mode = STEDMA40_MODE_PHYSICAL, + .dir = STEDMA40_MEM_TO_MEM, + + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .src_info.psize = STEDMA40_PSIZE_PHY_1, + .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, + + .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.psize = STEDMA40_PSIZE_PHY_1, + .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, +}; +/* Default configuration for logical memcpy */ +struct stedma40_chan_cfg dma40_memcpy_conf_log = { + .dir = STEDMA40_MEM_TO_MEM, + + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .src_info.psize = STEDMA40_PSIZE_LOG_1, + .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, + + .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.psize = STEDMA40_PSIZE_LOG_1, + .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, +}; + +/* + * Mapping between destination event lines and physical device address. + * The event line is tied to a device and therefore the address is constant. + * When the address comes from a primecell it will be configured in runtime + * and we set the address to -1 as a placeholder. + */ +static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = { + /* MUSB - these will be runtime-reconfigured */ + [DB8500_DMA_DEV39_USB_OTG_OEP_8] = -1, + [DB8500_DMA_DEV16_USB_OTG_OEP_7_15] = -1, + [DB8500_DMA_DEV17_USB_OTG_OEP_6_14] = -1, + [DB8500_DMA_DEV18_USB_OTG_OEP_5_13] = -1, + [DB8500_DMA_DEV19_USB_OTG_OEP_4_12] = -1, + [DB8500_DMA_DEV36_USB_OTG_OEP_3_11] = -1, + [DB8500_DMA_DEV37_USB_OTG_OEP_2_10] = -1, + [DB8500_DMA_DEV38_USB_OTG_OEP_1_9] = -1, + /* PrimeCells - run-time configured */ + [DB8500_DMA_DEV0_SPI0_TX] = -1, + [DB8500_DMA_DEV1_SD_MMC0_TX] = -1, + [DB8500_DMA_DEV2_SD_MMC1_TX] = -1, + [DB8500_DMA_DEV3_SD_MMC2_TX] = -1, + [DB8500_DMA_DEV8_SSP0_TX] = -1, + [DB8500_DMA_DEV9_SSP1_TX] = -1, + [DB8500_DMA_DEV11_UART2_TX] = -1, + [DB8500_DMA_DEV12_UART1_TX] = -1, + [DB8500_DMA_DEV13_UART0_TX] = -1, + [DB8500_DMA_DEV28_SD_MM2_TX] = -1, + [DB8500_DMA_DEV29_SD_MM0_TX] = -1, + [DB8500_DMA_DEV32_SD_MM1_TX] = -1, + [DB8500_DMA_DEV33_SPI2_TX] = -1, + [DB8500_DMA_DEV35_SPI1_TX] = -1, + [DB8500_DMA_DEV40_SPI3_TX] = -1, + [DB8500_DMA_DEV41_SD_MM3_TX] = -1, + [DB8500_DMA_DEV42_SD_MM4_TX] = -1, + [DB8500_DMA_DEV43_SD_MM5_TX] = -1, +}; + +/* Mapping between source event lines and physical device address */ +static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = { + /* MUSB - these will be runtime-reconfigured */ + [DB8500_DMA_DEV39_USB_OTG_IEP_8] = -1, + [DB8500_DMA_DEV16_USB_OTG_IEP_7_15] = -1, + [DB8500_DMA_DEV17_USB_OTG_IEP_6_14] = -1, + [DB8500_DMA_DEV18_USB_OTG_IEP_5_13] = -1, + [DB8500_DMA_DEV19_USB_OTG_IEP_4_12] = -1, + [DB8500_DMA_DEV36_USB_OTG_IEP_3_11] = -1, + [DB8500_DMA_DEV37_USB_OTG_IEP_2_10] = -1, + [DB8500_DMA_DEV38_USB_OTG_IEP_1_9] = -1, + /* PrimeCells */ + [DB8500_DMA_DEV0_SPI0_RX] = -1, + [DB8500_DMA_DEV1_SD_MMC0_RX] = -1, + [DB8500_DMA_DEV2_SD_MMC1_RX] = -1, + [DB8500_DMA_DEV3_SD_MMC2_RX] = -1, + [DB8500_DMA_DEV8_SSP0_RX] = -1, + [DB8500_DMA_DEV9_SSP1_RX] = -1, + [DB8500_DMA_DEV11_UART2_RX] = -1, + [DB8500_DMA_DEV12_UART1_RX] = -1, + [DB8500_DMA_DEV13_UART0_RX] = -1, + [DB8500_DMA_DEV28_SD_MM2_RX] = -1, + [DB8500_DMA_DEV29_SD_MM0_RX] = -1, + [DB8500_DMA_DEV32_SD_MM1_RX] = -1, + [DB8500_DMA_DEV33_SPI2_RX] = -1, + [DB8500_DMA_DEV35_SPI1_RX] = -1, + [DB8500_DMA_DEV40_SPI3_RX] = -1, + [DB8500_DMA_DEV41_SD_MM3_RX] = -1, + [DB8500_DMA_DEV42_SD_MM4_RX] = -1, + [DB8500_DMA_DEV43_SD_MM5_RX] = -1, +}; + +/* Reserved event lines for memcpy only */ +static int dma40_memcpy_event[] = { + DB8500_DMA_MEMCPY_TX_0, + DB8500_DMA_MEMCPY_TX_1, + DB8500_DMA_MEMCPY_TX_2, + DB8500_DMA_MEMCPY_TX_3, + DB8500_DMA_MEMCPY_TX_4, + DB8500_DMA_MEMCPY_TX_5, +}; + +static struct stedma40_platform_data dma40_plat_data = { + .dev_len = DB8500_DMA_NR_DEV, + .dev_rx = dma40_rx_map, + .dev_tx = dma40_tx_map, + .memcpy = dma40_memcpy_event, + .memcpy_len = ARRAY_SIZE(dma40_memcpy_event), + .memcpy_conf_phy = &dma40_memcpy_conf_phy, + .memcpy_conf_log = &dma40_memcpy_conf_log, + .disabled_channels = {-1}, +}; + +struct platform_device u8500_dma40_device = { + .dev = { + .platform_data = &dma40_plat_data, + }, + .name = "dma40", + .id = 0, + .num_resources = ARRAY_SIZE(dma40_resources), + .resource = dma40_resources +}; + +void dma40_u8500ed_fixup(void) +{ + dma40_plat_data.memcpy = NULL; + dma40_plat_data.memcpy_len = 0; + dma40_resources[0].start = U8500_DMA_BASE_ED; + dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1; + dma40_resources[1].start = U8500_DMA_LCPA_BASE_ED; + dma40_resources[1].end = U8500_DMA_LCPA_BASE_ED + 2 * SZ_1K - 1; +} + +struct resource keypad_resources[] = { + [0] = { + .start = U8500_SKE_BASE, + .end = U8500_SKE_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_DB8500_KB, + .end = IRQ_DB8500_KB, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device u8500_ske_keypad_device = { + .name = "nmk-ske-keypad", + .id = -1, + .num_resources = ARRAY_SIZE(keypad_resources), + .resource = keypad_resources, +}; |