diff options
Diffstat (limited to 'arch/arm/mach-s3c64xx/Kconfig')
| -rw-r--r-- | arch/arm/mach-s3c64xx/Kconfig | 268 |
1 files changed, 268 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig new file mode 100644 index 00000000..e4177e22 --- /dev/null +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -0,0 +1,268 @@ +# Copyright 2008 Openmoko, Inc. +# Simtec Electronics, Ben Dooks <ben@simtec.co.uk> +# +# Licensed under GPLv2 + +# temporary until we can eliminate all drivers using it. +config PLAT_S3C64XX + bool + depends on ARCH_S3C64XX + select SAMSUNG_WAKEMASK + default y + help + Base platform code for any Samsung S3C64XX device + + +# Configuration options for the S3C6410 CPU + +config CPU_S3C6400 + bool + help + Enable S3C6400 CPU support + +config CPU_S3C6410 + bool + help + Enable S3C6410 CPU support + +config S3C64XX_DMA + bool "S3C64XX DMA" + select S3C_DMA + +config S3C64XX_SETUP_SDHCI + select S3C64XX_SETUP_SDHCI_GPIO + bool + help + Internal configuration for default SDHCI setup for S3C6400 and + S3C6410 SoCs. + +config S3C64XX_DEV_ONENAND1 + bool + help + Compile in platform device definition for OneNAND1 controller + +# platform specific device setup + +config S3C64XX_SETUP_I2C0 + bool + default y + help + Common setup code for i2c bus 0. + + Note, currently since i2c0 is always compiled, this setup helper + is always compiled with it. + +config S3C64XX_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + +config S3C64XX_SETUP_IDE + bool + help + Common setup code for S3C64XX IDE. + +config S3C64XX_SETUP_FB_24BPP + bool + help + Common setup code for S3C64XX with an 24bpp RGB display helper. + +config S3C64XX_SETUP_KEYPAD + bool + help + Common setup code for S3C64XX KEYPAD GPIO configurations + +config S3C64XX_SETUP_SDHCI_GPIO + bool + help + Common setup code for S3C64XX SDHCI GPIO configurations + +# S36400 Macchine support + +config MACH_SMDK6400 + bool "SMDK6400" + select CPU_S3C6400 + select S3C_DEV_HSMMC + select S3C_DEV_NAND + select S3C64XX_SETUP_SDHCI + help + Machine support for the Samsung SMDK6400 + +# S3C6410 machine support + +config MACH_ANW6410 + bool "A&W6410" + select CPU_S3C6410 + select S3C_DEV_FB + select S3C64XX_SETUP_FB_24BPP + help + Machine support for the A&W6410 + +config MACH_MINI6410 + bool "MINI6410" + select CPU_S3C6410 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C64XX_SETUP_SDHCI + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + select S3C_DEV_FB + select S3C64XX_SETUP_FB_24BPP + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + help + Machine support for the FriendlyARM MINI6410 + +config MACH_REAL6410 + bool "REAL6410" + select CPU_S3C6410 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C64XX_SETUP_SDHCI + select S3C_DEV_FB + select S3C64XX_SETUP_FB_24BPP + select S3C_DEV_NAND + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + select S3C_DEV_USB_HOST + help + Machine support for the CoreWind REAL6410 + +config MACH_SMDK6410 + bool "SMDK6410" + select CPU_S3C6410 + select SAMSUNG_DEV_ADC + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_I2C1 + select SAMSUNG_DEV_IDE + select S3C_DEV_FB + select S3C_DEV_RTC + select SAMSUNG_DEV_TS + select S3C_DEV_USB_HOST + select S3C_DEV_USB_HSOTG + select S3C_DEV_WDT + select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select S3C64XX_SETUP_SDHCI + select S3C64XX_SETUP_I2C1 + select S3C64XX_SETUP_IDE + select S3C64XX_SETUP_FB_24BPP + select S3C64XX_SETUP_KEYPAD + help + Machine support for the Samsung SMDK6410 + +# At least some of the SMDK6410s were shipped with the card detect +# for the MMC/SD slots connected to the same input. This means that +# either the boards need to be altered to have channel0 to an alternate +# configuration or that only one slot can be used. + +choice + prompt "SMDK6410 MMC/SD slot setup" + depends on MACH_SMDK6410 + +config SMDK6410_SD_CH0 + bool "Use channel 0 only" + depends on MACH_SMDK6410 + help + Select CON7 (channel 0) as the MMC/SD slot, as + at least some SMDK6410 boards come with the + resistors fitted so that the card detects for + channels 0 and 1 are the same. + +config SMDK6410_SD_CH1 + bool "Use channel 1 only" + depends on MACH_SMDK6410 + help + Select CON6 (channel 1) as the MMC/SD slot, as + at least some SMDK6410 boards come with the + resistors fitted so that the card detects for + channels 0 and 1 are the same. + +endchoice + +config SMDK6410_WM1190_EV1 + bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" + depends on MACH_SMDK6410 + select REGULATOR + select REGULATOR_WM8350 + select S3C24XX_GPIO_EXTRA64 + select MFD_WM8350_I2C + select MFD_WM8350_CONFIG_MODE_0 + select MFD_WM8350_CONFIG_MODE_3 + select MFD_WM8352_CONFIG_MODE_0 + help + The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC + and audio daughtercard for the Samsung SMDK6410 reference + platform. Enabling this option will build support for this + module into the kernel. The presence of the module will be + detected at runtime so the the resulting kernel can be used + with or without the 1190-EV1 fitted. + +config SMDK6410_WM1192_EV1 + bool "Support Wolfson Microelectronics 1192-EV1 PMIC card" + depends on MACH_SMDK6410 + select REGULATOR + select REGULATOR_WM831X + select S3C24XX_GPIO_EXTRA64 + select MFD_WM831X + select MFD_WM831X_I2C + help + The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC + daughtercard for the Samsung SMDK6410 reference platform. + Enabling this option will build support for this module into + the kernel. The presence of the daughtercard will be + detected at runtime so the the resulting kernel can be used + with or without the 1192-EV1 fitted. + +config MACH_NCP + bool "NCP" + select CPU_S3C6410 + select S3C_DEV_I2C1 + select S3C_DEV_HSMMC1 + select S3C64XX_SETUP_I2C1 + help + Machine support for the Samsung NCP + +config MACH_HMT + bool "Airgoo HMT" + select CPU_S3C6410 + select S3C_DEV_FB + select S3C_DEV_NAND + select S3C_DEV_USB_HOST + select S3C64XX_SETUP_FB_24BPP + select SAMSUNG_DEV_PWM + help + Machine support for the Airgoo HMT + +config MACH_SMARTQ + bool + select CPU_S3C6410 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_FB + select S3C_DEV_HWMON + select S3C_DEV_RTC + select S3C_DEV_USB_HSOTG + select S3C_DEV_USB_HOST + select S3C64XX_SETUP_SDHCI + select S3C64XX_SETUP_FB_24BPP + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_PWM + select SAMSUNG_DEV_TS + help + Shared machine support for SmartQ 5/7 + +config MACH_SMARTQ5 + bool "SmartQ 5" + select MACH_SMARTQ + help + Machine support for the SmartQ 5 + +config MACH_SMARTQ7 + bool "SmartQ 7" + select MACH_SMARTQ + help + Machine support for the SmartQ 7 |