diff options
Diffstat (limited to 'arch/arm/mach-s3c2443')
| -rw-r--r-- | arch/arm/mach-s3c2443/Kconfig | 33 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2443/Makefile | 20 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2443/clock.c | 376 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2443/dma.c | 180 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2443/irq.c | 278 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2443/mach-smdk2443.c | 148 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2443/s3c2443.c | 110 |
7 files changed, 1145 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig new file mode 100644 index 00000000..d8eb8682 --- /dev/null +++ b/arch/arm/mach-s3c2443/Kconfig @@ -0,0 +1,33 @@ +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +config CPU_S3C2443 + bool + depends on ARCH_S3C2410 + select CPU_ARM920T + select S3C2443_DMA if S3C2410_DMA + select CPU_LLSERIAL_S3C2440 + select SAMSUNG_CLKSRC + select S3C2443_CLOCK + select S3C_GPIO_PULL_S3C2443 + help + Support for the S3C2443 SoC from the S3C24XX line + +config S3C2443_DMA + bool + depends on CPU_S3C2443 + help + Internal config node for S3C2443 DMA support + +menu "S3C2443 Machines" + +config MACH_SMDK2443 + bool "SMDK2443" + select CPU_S3C2443 + select MACH_SMDK + select S3C_DEV_HSMMC1 + help + Say Y here if you are using an SMDK2443 + +endmenu diff --git a/arch/arm/mach-s3c2443/Makefile b/arch/arm/mach-s3c2443/Makefile new file mode 100644 index 00000000..d1843c9e --- /dev/null +++ b/arch/arm/mach-s3c2443/Makefile @@ -0,0 +1,20 @@ +# arch/arm/mach-s3c2443/Makefile +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_CPU_S3C2443) += s3c2443.o +obj-$(CONFIG_CPU_S3C2443) += irq.o +obj-$(CONFIG_CPU_S3C2443) += clock.o + +obj-$(CONFIG_S3C2443_DMA) += dma.o + +# Machine support + +obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c new file mode 100644 index 00000000..f4ec6d57 --- /dev/null +++ b/arch/arm/mach-s3c2443/clock.c @@ -0,0 +1,376 @@ +/* linux/arch/arm/mach-s3c2443/clock.c + * + * Copyright (c) 2007, 2010 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2443 Clock control support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/init.h> + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/sysdev.h> +#include <linux/clk.h> +#include <linux/mutex.h> +#include <linux/serial_core.h> +#include <linux/io.h> + +#include <asm/mach/map.h> + +#include <mach/hardware.h> + +#include <mach/regs-s3c2443-clock.h> + +#include <plat/cpu-freq.h> + +#include <plat/s3c2443.h> +#include <plat/clock.h> +#include <plat/clock-clksrc.h> +#include <plat/cpu.h> + +/* We currently have to assume that the system is running + * from the XTPll input, and that all ***REFCLKs are being + * fed from it, as we cannot read the state of OM[4] from + * software. + * + * It would be possible for each board initialisation to + * set the correct muxing at initialisation +*/ + +/* clock selections */ + +static struct clk clk_i2s_ext = { + .name = "i2s-ext", + .id = -1, +}; + +/* armdiv + * + * this clock is sourced from msysclk and can have a number of + * divider values applied to it to then be fed into armclk. +*/ + +/* armdiv divisor table */ + +static unsigned int armdiv[16] = { + [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1, + [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2, + [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3, + [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4, + [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6, + [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8, + [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12, + [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16, +}; + +static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0) +{ + clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + + return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]; +} + +static unsigned long s3c2443_armclk_roundrate(struct clk *clk, + unsigned long rate) +{ + unsigned long parent = clk_get_rate(clk->parent); + unsigned long calc; + unsigned best = 256; /* bigger than any value */ + unsigned div; + int ptr; + + for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) { + div = armdiv[ptr]; + calc = parent / div; + if (calc <= rate && div < best) + best = div; + } + + return parent / best; +} + +static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) +{ + unsigned long parent = clk_get_rate(clk->parent); + unsigned long calc; + unsigned div; + unsigned best = 256; /* bigger than any value */ + int ptr; + int val = -1; + + for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) { + div = armdiv[ptr]; + calc = parent / div; + if (calc <= rate && div < best) { + best = div; + val = ptr; + } + } + + if (val >= 0) { + unsigned long clkcon0; + + clkcon0 = __raw_readl(S3C2443_CLKDIV0); + clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; + __raw_writel(clkcon0, S3C2443_CLKDIV0); + } + + return (val == -1) ? -EINVAL : 0; +} + +static struct clk clk_armdiv = { + .name = "armdiv", + .id = -1, + .parent = &clk_msysclk.clk, + .ops = &(struct clk_ops) { + .round_rate = s3c2443_armclk_roundrate, + .set_rate = s3c2443_armclk_setrate, + }, +}; + +/* armclk + * + * this is the clock fed into the ARM core itself, from armdiv or from hclk. + */ + +static struct clk *clk_arm_sources[] = { + [0] = &clk_armdiv, + [1] = &clk_h, +}; + +static struct clksrc_clk clk_arm = { + .clk = { + .name = "armclk", + .id = -1, + }, + .sources = &(struct clksrc_sources) { + .sources = clk_arm_sources, + .nr_sources = ARRAY_SIZE(clk_arm_sources), + }, + .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 }, +}; + +/* hsspi + * + * high-speed spi clock, sourced from esysclk +*/ + +static struct clksrc_clk clk_hsspi = { + .clk = { + .name = "hsspi", + .id = -1, + .parent = &clk_esysclk.clk, + .ctrlbit = S3C2443_SCLKCON_HSSPICLK, + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, +}; + + +/* clk_hsmcc_div + * + * this clock is sourced from epll, and is fed through a divider, + * to a mux controlled by sclkcon where either it or a extclk can + * be fed to the hsmmc block +*/ + +static struct clksrc_clk clk_hsmmc_div = { + .clk = { + .name = "hsmmc-div", + .id = 1, + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, +}; + +static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2443_SCLKCON); + + clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT | + S3C2443_SCLKCON_HSMMCCLK_EPLL); + + if (parent == &clk_epll) + clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL; + else if (parent == &clk_ext) + clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT; + else + return -EINVAL; + + if (clk->usage > 0) { + __raw_writel(clksrc, S3C2443_SCLKCON); + } + + clk->parent = parent; + return 0; +} + +static int s3c2443_enable_hsmmc(struct clk *clk, int enable) +{ + return s3c2443_setparent_hsmmc(clk, clk->parent); +} + +static struct clk clk_hsmmc = { + .name = "hsmmc-if", + .id = 1, + .parent = &clk_hsmmc_div.clk, + .enable = s3c2443_enable_hsmmc, + .ops = &(struct clk_ops) { + .set_parent = s3c2443_setparent_hsmmc, + }, +}; + +/* i2s_eplldiv + * + * This clock is the output from the I2S divisor of ESYSCLK, and is separate + * from the mux that comes after it (cannot merge into one single clock) +*/ + +static struct clksrc_clk clk_i2s_eplldiv = { + .clk = { + .name = "i2s-eplldiv", + .id = -1, + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, +}; + +/* i2s-ref + * + * i2s bus reference clock, selectable from external, esysclk or epllref + * + * Note, this used to be two clocks, but was compressed into one. +*/ + +struct clk *clk_i2s_srclist[] = { + [0] = &clk_i2s_eplldiv.clk, + [1] = &clk_i2s_ext, + [2] = &clk_epllref.clk, + [3] = &clk_epllref.clk, +}; + +static struct clksrc_clk clk_i2s = { + .clk = { + .name = "i2s-if", + .id = -1, + .ctrlbit = S3C2443_SCLKCON_I2SCLK, + .enable = s3c2443_clkcon_enable_s, + + }, + .sources = &(struct clksrc_sources) { + .sources = clk_i2s_srclist, + .nr_sources = ARRAY_SIZE(clk_i2s_srclist), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, +}; + +/* standard clock definitions */ + +static struct clk init_clocks_off[] = { + { + .name = "sdi", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_SDI, + }, { + .name = "iis", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_IIS, + }, { + .name = "spi", + .id = 0, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_SPI0, + }, { + .name = "spi", + .id = 1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_SPI1, + } +}; + +static struct clk init_clocks[] = { +}; + +/* clocks to add straight away */ + +static struct clksrc_clk *clksrcs[] __initdata = { + &clk_arm, + &clk_i2s_eplldiv, + &clk_i2s, + &clk_hsspi, + &clk_hsmmc_div, +}; + +static struct clk *clks[] __initdata = { + &clk_hsmmc, + &clk_armdiv, +}; + +void __init_or_cpufreq s3c2443_setup_clocks(void) +{ + s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div); +} + +void __init s3c2443_init_clocks(int xtal) +{ + unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); + int ptr; + + clk_epll.rate = s3c2443_get_epll(epllcon, xtal); + clk_epll.parent = &clk_epllref.clk; + + s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div); + + s3c2443_setup_clocks(); + + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_register_clksrc(clksrcs[ptr], 1); + + /* register clocks from clock array */ + + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + /* We must be careful disabling the clocks we are not intending to + * be using at boot time, as subsystems such as the LCD which do + * their own DMA requests to the bus can cause the system to lockup + * if they where in the middle of requesting bus access. + * + * Disabling the LCD clock if the LCD is active is very dangerous, + * and therefore the bootloader should be careful to not enable + * the LCD clock if it is not needed. + */ + + /* install (and disable) the clocks we do not need immediately */ + + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c new file mode 100644 index 00000000..3f658685 --- /dev/null +++ b/arch/arm/mach-s3c2443/dma.c @@ -0,0 +1,180 @@ +/* linux/arch/arm/mach-s3c2443/dma.c + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2443 DMA selection + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysdev.h> +#include <linux/serial_core.h> +#include <linux/io.h> + +#include <mach/dma.h> + +#include <plat/dma-s3c24xx.h> +#include <plat/cpu.h> + +#include <plat/regs-serial.h> +#include <mach/regs-gpio.h> +#include <plat/regs-ac97.h> +#include <plat/regs-dma.h> +#include <mach/regs-mem.h> +#include <mach/regs-lcd.h> +#include <mach/regs-sdi.h> +#include <plat/regs-iis.h> +#include <plat/regs-spi.h> + +#define MAP(x) { \ + [0] = (x) | DMA_CH_VALID, \ + [1] = (x) | DMA_CH_VALID, \ + [2] = (x) | DMA_CH_VALID, \ + [3] = (x) | DMA_CH_VALID, \ + [4] = (x) | DMA_CH_VALID, \ + [5] = (x) | DMA_CH_VALID, \ + } + +static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels = MAP(S3C2443_DMAREQSEL_XDREQ0), + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels = MAP(S3C2443_DMAREQSEL_XDREQ1), + }, + [DMACH_SDI] = { + .name = "sdi", + .channels = MAP(S3C2443_DMAREQSEL_SDI), + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels = MAP(S3C2443_DMAREQSEL_SPI0TX), + .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels = MAP(S3C2443_DMAREQSEL_SPI1TX), + .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels = MAP(S3C2443_DMAREQSEL_UART0_0), + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels = MAP(S3C2443_DMAREQSEL_UART1_0), + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels = MAP(S3C2443_DMAREQSEL_UART2_0), + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_UART3] = { + .name = "uart3", + .channels = MAP(S3C2443_DMAREQSEL_UART3_0), + .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH, + .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH, + }, + [DMACH_UART0_SRC2] = { + .name = "uart0", + .channels = MAP(S3C2443_DMAREQSEL_UART0_1), + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1_SRC2] = { + .name = "uart1", + .channels = MAP(S3C2443_DMAREQSEL_UART1_1), + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2_SRC2] = { + .name = "uart2", + .channels = MAP(S3C2443_DMAREQSEL_UART2_1), + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_UART3_SRC2] = { + .name = "uart3", + .channels = MAP(S3C2443_DMAREQSEL_UART3_1), + .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH, + .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels = MAP(S3C2443_DMAREQSEL_TIMER), + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels = MAP(S3C2443_DMAREQSEL_I2SRX), + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels = MAP(S3C2443_DMAREQSEL_I2STX), + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_PCM_IN] = { + .name = "pcm-in", + .channels = MAP(S3C2443_DMAREQSEL_PCMIN), + .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, + }, + [DMACH_PCM_OUT] = { + .name = "pcm-out", + .channels = MAP(S3C2443_DMAREQSEL_PCMOUT), + .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, + }, + [DMACH_MIC_IN] = { + .name = "mic-in", + .channels = MAP(S3C2443_DMAREQSEL_MICIN), + .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA, + }, +}; + +static void s3c2443_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) +{ + writel(map->channels[0] | S3C2443_DMAREQSEL_HW, + chan->regs + S3C2443_DMA_DMAREQSEL); +} + +static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = { + .select = s3c2443_dma_select, + .dcon_mask = 0, + .map = s3c2443_dma_mappings, + .map_size = ARRAY_SIZE(s3c2443_dma_mappings), +}; + +static int __init s3c2443_dma_add(struct sys_device *sysdev) +{ + s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100); + return s3c24xx_dma_init_map(&s3c2443_dma_sel); +} + +static struct sysdev_driver s3c2443_dma_driver = { + .add = s3c2443_dma_add, +}; + +static int __init s3c2443_dma_init(void) +{ + return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_dma_driver); +} + +arch_initcall(s3c2443_dma_init); diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c new file mode 100644 index 00000000..83ecb117 --- /dev/null +++ b/arch/arm/mach-s3c2443/irq.c @@ -0,0 +1,278 @@ +/* linux/arch/arm/mach-s3c2443/irq.c + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <asm/irq.h> + +#include <asm/mach/irq.h> + +#include <mach/regs-irq.h> +#include <mach/regs-gpio.h> + +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/irq.h> + +#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) + +static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len) +{ + unsigned int subsrc, submsk; + unsigned int end; + + /* read the current pending interrupts, and the mask + * for what it is available */ + + subsrc = __raw_readl(S3C2410_SUBSRCPND); + submsk = __raw_readl(S3C2410_INTSUBMSK); + + subsrc &= ~submsk; + subsrc >>= (irq - S3C2410_IRQSUB(0)); + subsrc &= (1 << len)-1; + + end = len + irq; + + for (; irq < end && subsrc; irq++) { + if (subsrc & 1) + generic_handle_irq(irq); + + subsrc >>= 1; + } +} + +/* WDT/AC97 sub interrupts */ + +static void s3c2443_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc) +{ + s3c2443_irq_demux(IRQ_S3C2443_WDT, 4); +} + +#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0)) +#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97) + +static void s3c2443_irq_wdtac97_mask(struct irq_data *data) +{ + s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97); +} + +static void s3c2443_irq_wdtac97_unmask(struct irq_data *data) +{ + s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97); +} + +static void s3c2443_irq_wdtac97_ack(struct irq_data *data) +{ + s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97); +} + +static struct irq_chip s3c2443_irq_wdtac97 = { + .irq_mask = s3c2443_irq_wdtac97_mask, + .irq_unmask = s3c2443_irq_wdtac97_unmask, + .irq_ack = s3c2443_irq_wdtac97_ack, +}; + +/* LCD sub interrupts */ + +static void s3c2443_irq_demux_lcd(unsigned int irq, struct irq_desc *desc) +{ + s3c2443_irq_demux(IRQ_S3C2443_LCD1, 4); +} + +#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0)) +#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4) + +static void s3c2443_irq_lcd_mask(struct irq_data *data) +{ + s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD); +} + +static void s3c2443_irq_lcd_unmask(struct irq_data *data) +{ + s3c_irqsub_unmask(data->irq, INTMSK_LCD); +} + +static void s3c2443_irq_lcd_ack(struct irq_data *data) +{ + s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD); +} + +static struct irq_chip s3c2443_irq_lcd = { + .irq_mask = s3c2443_irq_lcd_mask, + .irq_unmask = s3c2443_irq_lcd_unmask, + .irq_ack = s3c2443_irq_lcd_ack, +}; + +/* DMA sub interrupts */ + +static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc) +{ + s3c2443_irq_demux(IRQ_S3C2443_DMA0, 6); +} + +#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0)) +#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5) + +static void s3c2443_irq_dma_mask(struct irq_data *data) +{ + s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA); +} + +static void s3c2443_irq_dma_unmask(struct irq_data *data) +{ + s3c_irqsub_unmask(data->irq, INTMSK_DMA); +} + +static void s3c2443_irq_dma_ack(struct irq_data *data) +{ + s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA); +} + +static struct irq_chip s3c2443_irq_dma = { + .irq_mask = s3c2443_irq_dma_mask, + .irq_unmask = s3c2443_irq_dma_unmask, + .irq_ack = s3c2443_irq_dma_ack, +}; + +/* UART3 sub interrupts */ + +static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) +{ + s3c2443_irq_demux(IRQ_S3C2443_RX3, 3); +} + +#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) +#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) + +static void s3c2443_irq_uart3_mask(struct irq_data *data) +{ + s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3); +} + +static void s3c2443_irq_uart3_unmask(struct irq_data *data) +{ + s3c_irqsub_unmask(data->irq, INTMSK_UART3); +} + +static void s3c2443_irq_uart3_ack(struct irq_data *data) +{ + s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3); +} + +static struct irq_chip s3c2443_irq_uart3 = { + .irq_mask = s3c2443_irq_uart3_mask, + .irq_unmask = s3c2443_irq_uart3_unmask, + .irq_ack = s3c2443_irq_uart3_ack, +}; + +/* CAM sub interrupts */ + +static void s3c2443_irq_demux_cam(unsigned int irq, struct irq_desc *desc) +{ + s3c2443_irq_demux(IRQ_S3C2440_CAM_C, 4); +} + +#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) +#define SUBMSK_CAM INTMSK(IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P) + +static void s3c2443_irq_cam_mask(struct irq_data *data) +{ + s3c_irqsub_mask(data->irq, INTMSK_CAM, SUBMSK_CAM); +} + +static void s3c2443_irq_cam_unmask(struct irq_data *data) +{ + s3c_irqsub_unmask(data->irq, INTMSK_CAM); +} + +static void s3c2443_irq_cam_ack(struct irq_data *data) +{ + s3c_irqsub_maskack(data->irq, INTMSK_CAM, SUBMSK_CAM); +} + +static struct irq_chip s3c2443_irq_cam = { + .irq_mask = s3c2443_irq_cam_mask, + .irq_unmask = s3c2443_irq_cam_unmask, + .irq_ack = s3c2443_irq_cam_ack, +}; + +/* IRQ initialisation code */ + +static int __init s3c2443_add_sub(unsigned int base, + void (*demux)(unsigned int, + struct irq_desc *), + struct irq_chip *chip, + unsigned int start, unsigned int end) +{ + unsigned int irqno; + + irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq); + irq_set_chained_handler(base, demux); + + for (irqno = start; irqno <= end; irqno++) { + irq_set_chip_and_handler(irqno, chip, handle_level_irq); + set_irq_flags(irqno, IRQF_VALID); + } + + return 0; +} + +static int __init s3c2443_irq_add(struct sys_device *sysdev) +{ + printk("S3C2443: IRQ Support\n"); + + s3c2443_add_sub(IRQ_CAM, s3c2443_irq_demux_cam, &s3c2443_irq_cam, + IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P); + + s3c2443_add_sub(IRQ_LCD, s3c2443_irq_demux_lcd, &s3c2443_irq_lcd, + IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4); + + s3c2443_add_sub(IRQ_S3C2443_DMA, s3c2443_irq_demux_dma, + &s3c2443_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5); + + s3c2443_add_sub(IRQ_S3C2443_UART3, s3c2443_irq_demux_uart3, + &s3c2443_irq_uart3, + IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3); + + s3c2443_add_sub(IRQ_WDT, s3c2443_irq_demux_wdtac97, + &s3c2443_irq_wdtac97, + IRQ_S3C2443_WDT, IRQ_S3C2443_AC97); + + return 0; +} + +static struct sysdev_driver s3c2443_irq_driver = { + .add = s3c2443_irq_add, +}; + +static int __init s3c2443_irq_init(void) +{ + return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_irq_driver); +} + +arch_initcall(s3c2443_irq_init); + diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c new file mode 100644 index 00000000..514275e4 --- /dev/null +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c @@ -0,0 +1,148 @@ +/* linux/arch/arm/mach-s3c2443/mach-smdk2443.c + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://www.fluff.org/ben/smdk2443/ + * + * Thanks to Samsung for the loan of an SMDK2443 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <mach/regs-gpio.h> +#include <mach/regs-lcd.h> + +#include <mach/idle.h> +#include <mach/fb.h> +#include <plat/iic.h> + +#include <plat/s3c2410.h> +#include <plat/s3c2443.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +#include <plat/common-smdk.h> + +static struct map_desc smdk2443_iodesc[] __initdata = { + /* ISA IO Space map (memory space selected by A24) */ + + { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + } +}; + +#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + /* IR port */ + [2] = { + .hwport = 2, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x43, + .ufcon = 0x51, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + } +}; + +static struct platform_device *smdk2443_devices[] __initdata = { + &s3c_device_wdt, + &s3c_device_i2c0, + &s3c_device_hsmmc1, +#ifdef CONFIG_SND_SOC_SMDK2443_WM9710 + &s3c_device_ac97, +#endif +}; + +static void __init smdk2443_map_io(void) +{ + s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs)); +} + +static void __init smdk2443_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + +#ifdef CONFIG_SND_SOC_SMDK2443_WM9710 + s3c24xx_ac97_setup_gpio(S3C24XX_AC97_GPE0); +#endif + + platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices)); + smdk_machine_init(); +} + +MACHINE_START(SMDK2443, "SMDK2443") + /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ + .boot_params = S3C2410_SDRAM_PA + 0x100, + + .init_irq = s3c24xx_init_irq, + .map_io = smdk2443_map_io, + .init_machine = smdk2443_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c new file mode 100644 index 00000000..e6a28ba5 --- /dev/null +++ b/arch/arm/mach-s3c2443/s3c2443.c @@ -0,0 +1,110 @@ +/* linux/arch/arm/mach-s3c2443/s3c2443.c + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Samsung S3C2443 Mobile CPU support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/sysdev.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <asm/irq.h> + +#include <mach/regs-s3c2443-clock.h> +#include <mach/reset.h> + +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> +#include <plat/s3c2443.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/fb-core.h> +#include <plat/nand-core.h> + +static struct map_desc s3c2443_iodesc[] __initdata = { + IODESC_ENT(WATCHDOG), + IODESC_ENT(CLKPWR), + IODESC_ENT(TIMER), +}; + +struct sysdev_class s3c2443_sysclass = { + .name = "s3c2443-core", +}; + +static struct sys_device s3c2443_sysdev = { + .cls = &s3c2443_sysclass, +}; + +static void s3c2443_hard_reset(void) +{ + __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST); +} + +int __init s3c2443_init(void) +{ + printk("S3C2443: Initialising architecture\n"); + + s3c24xx_reset_hook = s3c2443_hard_reset; + + s3c_nand_setname("s3c2412-nand"); + s3c_fb_setname("s3c2443-fb"); + + /* change WDT IRQ number */ + s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; + s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT; + + return sysdev_register(&s3c2443_sysdev); +} + +void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); +} + +/* s3c2443_map_io + * + * register the standard cpu IO areas, and any passed in from the + * machine specific initialisation. + */ + +void __init s3c2443_map_io(void) +{ + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443; + + iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); +} + +/* need to register class before we actually register the device, and + * we also need to ensure that it has been initialised before any of the + * drivers even try to use it (even if not on an s3c2443 based system) + * as a driver which may support both 2443 and 2440 may try and use it. +*/ + +static int __init s3c2443_core_init(void) +{ + return sysdev_class_register(&s3c2443_sysclass); +} + +core_initcall(s3c2443_core_init); |