aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s3c2412
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s3c2412')
-rw-r--r--arch/arm/mach-s3c2412/Kconfig99
-rw-r--r--arch/arm/mach-s3c2412/Makefile25
-rw-r--r--arch/arm/mach-s3c2412/clock.c786
-rw-r--r--arch/arm/mach-s3c2412/cpu-freq.c257
-rw-r--r--arch/arm/mach-s3c2412/dma.c195
-rw-r--r--arch/arm/mach-s3c2412/gpio.c62
-rw-r--r--arch/arm/mach-s3c2412/irq.c212
-rw-r--r--arch/arm/mach-s3c2412/mach-jive.c677
-rw-r--r--arch/arm/mach-s3c2412/mach-smdk2413.c160
-rw-r--r--arch/arm/mach-s3c2412/mach-vstms.c166
-rw-r--r--arch/arm/mach-s3c2412/pm.c122
-rw-r--r--arch/arm/mach-s3c2412/s3c2412.c252
-rw-r--r--arch/arm/mach-s3c2412/sleep.S68
13 files changed, 3081 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
new file mode 100644
index 00000000..e82ab4aa
--- /dev/null
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -0,0 +1,99 @@
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2412
+ bool
+ depends on ARCH_S3C2410
+ select CPU_ARM926T
+ select CPU_LLSERIAL_S3C2440
+ select S3C2412_PM if PM
+ select S3C2412_DMA if S3C2410_DMA
+ select S3C2410_GPIO
+ help
+ Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
+
+config CPU_S3C2412_ONLY
+ bool
+ depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
+ !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
+ !CPU_S3C2443 && CPU_S3C2412
+ default y if CPU_S3C2412
+
+config S3C2412_DMA
+ bool
+ depends on CPU_S3C2412
+ help
+ Internal config node for S3C2412 DMA support
+
+config S3C2412_PM
+ bool
+ select S3C2412_PM_SLEEP
+ help
+ Internal config node to apply S3C2412 power management
+
+config S3C2412_PM_SLEEP
+ bool
+ help
+ Internal config node to apply sleep for S3C2412 power management.
+ Can be selected by another SoCs with similar sleep procedure.
+
+# Note, the S3C2412 IOtiming support is in plat-s3c24xx
+
+config S3C2412_CPUFREQ
+ bool
+ depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+ select S3C2412_IOTIMING
+ default y
+ help
+ CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
+
+menu "S3C2412 Machines"
+
+config MACH_JIVE
+ bool "Logitech Jive"
+ select CPU_S3C2412
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the Logitech Jive.
+
+config MACH_JIVE_SHOW_BOOTLOADER
+ bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)"
+ depends on MACH_JIVE && EXPERIMENTAL
+
+config MACH_SMDK2413
+ bool "SMDK2413"
+ select CPU_S3C2412
+ select MACH_S3C2413
+ select MACH_SMDK
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using an SMDK2413
+
+config MACH_S3C2413
+ bool
+ help
+ Internal node for S3C2413 version of SMDK2413, so that
+ machine_is_s3c2413() will work when MACH_SMDK2413 is
+ selected
+
+config MACH_SMDK2412
+ bool "SMDK2412"
+ select MACH_SMDK2413
+ help
+ Say Y here if you are using an SMDK2412
+
+ Note, this shares support with SMDK2413, so will automatically
+ select MACH_SMDK2413.
+
+config MACH_VSTMS
+ bool "VMSTMS"
+ select CPU_S3C2412
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using an VSTMS board
+
+endmenu
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
new file mode 100644
index 00000000..6c48a91e
--- /dev/null
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -0,0 +1,25 @@
+# arch/arm/mach-s3c2412/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
+obj-$(CONFIG_CPU_S3C2412) += irq.o
+obj-$(CONFIG_CPU_S3C2412) += clock.o
+obj-$(CONFIG_CPU_S3C2412) += gpio.o
+obj-$(CONFIG_S3C2412_DMA) += dma.o
+obj-$(CONFIG_S3C2412_PM) += pm.o
+obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o
+obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_JIVE) += mach-jive.o
+obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
+obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
new file mode 100644
index 00000000..0c0505b0
--- /dev/null
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -0,0 +1,786 @@
+/* linux/arch/arm/mach-s3c2412/clock.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412,S3C2413 Clock control support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/s3c2412.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+/* We currently have to assume that the system is running
+ * from the XTPll input, and that all ***REFCLKs are being
+ * fed from it, as we cannot read the state of OM[4] from
+ * software.
+ *
+ * It would be possible for each board initialisation to
+ * set the correct muxing at initialisation
+*/
+
+static int s3c2412_clkcon_enable(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->ctrlbit;
+ unsigned long clkcon;
+
+ clkcon = __raw_readl(S3C2410_CLKCON);
+
+ if (enable)
+ clkcon |= clocks;
+ else
+ clkcon &= ~clocks;
+
+ __raw_writel(clkcon, S3C2410_CLKCON);
+
+ return 0;
+}
+
+static int s3c2412_upll_enable(struct clk *clk, int enable)
+{
+ unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
+ unsigned long orig = upllcon;
+
+ if (!enable)
+ upllcon |= S3C2412_PLLCON_OFF;
+ else
+ upllcon &= ~S3C2412_PLLCON_OFF;
+
+ __raw_writel(upllcon, S3C2410_UPLLCON);
+
+ /* allow ~150uS for the PLL to settle and lock */
+
+ if (enable && (orig & S3C2412_PLLCON_OFF))
+ udelay(150);
+
+ return 0;
+}
+
+/* clock selections */
+
+static struct clk clk_erefclk = {
+ .name = "erefclk",
+ .id = -1,
+};
+
+static struct clk clk_urefclk = {
+ .name = "urefclk",
+ .id = -1,
+};
+
+static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
+
+ if (parent == &clk_urefclk)
+ clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL;
+ else if (parent == &clk_upll)
+ clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ __raw_writel(clksrc, S3C2412_CLKSRC);
+ return 0;
+}
+
+static struct clk clk_usysclk = {
+ .name = "usysclk",
+ .id = -1,
+ .parent = &clk_xtal,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2412_setparent_usysclk,
+ },
+};
+
+static struct clk clk_mrefclk = {
+ .name = "mrefclk",
+ .parent = &clk_xtal,
+ .id = -1,
+};
+
+static struct clk clk_mdivclk = {
+ .name = "mdivclk",
+ .parent = &clk_xtal,
+ .id = -1,
+};
+
+static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
+
+ if (parent == &clk_usysclk)
+ clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK;
+ else if (parent == &clk_h)
+ clksrc |= S3C2412_CLKSRC_USBCLK_HCLK;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ __raw_writel(clksrc, S3C2412_CLKSRC);
+ return 0;
+}
+
+static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int div;
+
+ if (rate > parent_rate)
+ return parent_rate;
+
+ div = parent_rate / rate;
+ if (div > 2)
+ div = 2;
+
+ return parent_rate / div;
+}
+
+static unsigned long s3c2412_getrate_usbsrc(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2410_CLKDIVN);
+
+ return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1);
+}
+
+static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
+
+ rate = s3c2412_roundrate_usbsrc(clk, rate);
+
+ if ((parent_rate / rate) == 2)
+ clkdivn |= S3C2412_CLKDIVN_USB48DIV;
+ else
+ clkdivn &= ~S3C2412_CLKDIVN_USB48DIV;
+
+ __raw_writel(clkdivn, S3C2410_CLKDIVN);
+ return 0;
+}
+
+static struct clk clk_usbsrc = {
+ .name = "usbsrc",
+ .id = -1,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2412_getrate_usbsrc,
+ .set_rate = s3c2412_setrate_usbsrc,
+ .round_rate = s3c2412_roundrate_usbsrc,
+ .set_parent = s3c2412_setparent_usbsrc,
+ },
+};
+
+static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
+
+ if (parent == &clk_mdivclk)
+ clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
+ else if (parent == &clk_mpll)
+ clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ __raw_writel(clksrc, S3C2412_CLKSRC);
+ return 0;
+}
+
+static struct clk clk_msysclk = {
+ .name = "msysclk",
+ .id = -1,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2412_setparent_msysclk,
+ },
+};
+
+static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
+{
+ unsigned long flags;
+ unsigned long clkdiv;
+ unsigned long dvs;
+
+ /* Note, we current equate fclk andf msysclk for S3C2412 */
+
+ if (parent == &clk_msysclk || parent == &clk_f)
+ dvs = 0;
+ else if (parent == &clk_h)
+ dvs = S3C2412_CLKDIVN_DVSEN;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ /* update this under irq lockdown, clkdivn is not protected
+ * by the clock system. */
+
+ local_irq_save(flags);
+
+ clkdiv = __raw_readl(S3C2410_CLKDIVN);
+ clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
+ clkdiv |= dvs;
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static struct clk clk_armclk = {
+ .name = "armclk",
+ .id = -1,
+ .parent = &clk_msysclk,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2412_setparent_armclk,
+ },
+};
+
+/* these next clocks have an divider immediately after them,
+ * so we can register them with their divider and leave out the
+ * intermediate clock stage
+*/
+static unsigned long s3c2412_roundrate_clksrc(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int div;
+
+ if (rate > parent_rate)
+ return parent_rate;
+
+ /* note, we remove the +/- 1 calculations as they cancel out */
+
+ div = (rate / parent_rate);
+
+ if (div < 1)
+ div = 1;
+ else if (div > 16)
+ div = 16;
+
+ return parent_rate / div;
+}
+
+static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
+
+ if (parent == &clk_erefclk)
+ clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL;
+ else if (parent == &clk_mpll)
+ clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ __raw_writel(clksrc, S3C2412_CLKSRC);
+ return 0;
+}
+
+static unsigned long s3c2412_getrate_uart(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2410_CLKDIVN);
+
+ div &= S3C2412_CLKDIVN_UARTDIV_MASK;
+ div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
+
+ rate = s3c2412_roundrate_clksrc(clk, rate);
+
+ clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK;
+ clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT;
+
+ __raw_writel(clkdivn, S3C2410_CLKDIVN);
+ return 0;
+}
+
+static struct clk clk_uart = {
+ .name = "uartclk",
+ .id = -1,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2412_getrate_uart,
+ .set_rate = s3c2412_setrate_uart,
+ .set_parent = s3c2412_setparent_uart,
+ .round_rate = s3c2412_roundrate_clksrc,
+ },
+};
+
+static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
+
+ if (parent == &clk_erefclk)
+ clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL;
+ else if (parent == &clk_mpll)
+ clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ __raw_writel(clksrc, S3C2412_CLKSRC);
+ return 0;
+}
+
+static unsigned long s3c2412_getrate_i2s(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2410_CLKDIVN);
+
+ div &= S3C2412_CLKDIVN_I2SDIV_MASK;
+ div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
+
+ rate = s3c2412_roundrate_clksrc(clk, rate);
+
+ clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK;
+ clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT;
+
+ __raw_writel(clkdivn, S3C2410_CLKDIVN);
+ return 0;
+}
+
+static struct clk clk_i2s = {
+ .name = "i2sclk",
+ .id = -1,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2412_getrate_i2s,
+ .set_rate = s3c2412_setrate_i2s,
+ .set_parent = s3c2412_setparent_i2s,
+ .round_rate = s3c2412_roundrate_clksrc,
+ },
+};
+
+static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
+
+ if (parent == &clk_usysclk)
+ clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK;
+ else if (parent == &clk_h)
+ clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ __raw_writel(clksrc, S3C2412_CLKSRC);
+ return 0;
+}
+static unsigned long s3c2412_getrate_cam(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2410_CLKDIVN);
+
+ div &= S3C2412_CLKDIVN_CAMDIV_MASK;
+ div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
+
+ rate = s3c2412_roundrate_clksrc(clk, rate);
+
+ clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK;
+ clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT;
+
+ __raw_writel(clkdivn, S3C2410_CLKDIVN);
+ return 0;
+}
+
+static struct clk clk_cam = {
+ .name = "camif-upll", /* same as 2440 name */
+ .id = -1,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2412_getrate_cam,
+ .set_rate = s3c2412_setrate_cam,
+ .set_parent = s3c2412_setparent_cam,
+ .round_rate = s3c2412_roundrate_clksrc,
+ },
+};
+
+/* standard clock definitions */
+
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "nand",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_NAND,
+ }, {
+ .name = "sdi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_SDI,
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_ADC,
+ }, {
+ .name = "i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_IIC,
+ }, {
+ .name = "iis",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_IIS,
+ }, {
+ .name = "spi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_SPI,
+ }
+};
+
+static struct clk init_clocks[] = {
+ {
+ .name = "dma",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_DMA0,
+ }, {
+ .name = "dma",
+ .id = 1,
+ .parent = &clk_h,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_DMA1,
+ }, {
+ .name = "dma",
+ .id = 2,
+ .parent = &clk_h,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_DMA2,
+ }, {
+ .name = "dma",
+ .id = 3,
+ .parent = &clk_h,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_DMA3,
+ }, {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_LCDC,
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_GPIO,
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_USBH,
+ }, {
+ .name = "usb-device",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_USBD,
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_PWMT,
+ }, {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_UART0,
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_UART1,
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_UART2,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_RTC,
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p,
+ .ctrlbit = 0,
+ }, {
+ .name = "usb-bus-gadget",
+ .id = -1,
+ .parent = &clk_usb_bus,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_USB_DEV48,
+ }, {
+ .name = "usb-bus-host",
+ .id = -1,
+ .parent = &clk_usb_bus,
+ .enable = s3c2412_clkcon_enable,
+ .ctrlbit = S3C2412_CLKCON_USB_HOST48,
+ }
+};
+
+/* clocks to add where we need to check their parentage */
+
+struct clk_init {
+ struct clk *clk;
+ unsigned int bit;
+ struct clk *src_0;
+ struct clk *src_1;
+};
+
+static struct clk_init clks_src[] __initdata = {
+ {
+ .clk = &clk_usysclk,
+ .bit = S3C2412_CLKSRC_USBCLK_HCLK,
+ .src_0 = &clk_urefclk,
+ .src_1 = &clk_upll,
+ }, {
+ .clk = &clk_i2s,
+ .bit = S3C2412_CLKSRC_I2SCLK_MPLL,
+ .src_0 = &clk_erefclk,
+ .src_1 = &clk_mpll,
+ }, {
+ .clk = &clk_cam,
+ .bit = S3C2412_CLKSRC_CAMCLK_HCLK,
+ .src_0 = &clk_usysclk,
+ .src_1 = &clk_h,
+ }, {
+ .clk = &clk_msysclk,
+ .bit = S3C2412_CLKSRC_MSYSCLK_MPLL,
+ .src_0 = &clk_mdivclk,
+ .src_1 = &clk_mpll,
+ }, {
+ .clk = &clk_uart,
+ .bit = S3C2412_CLKSRC_UARTCLK_MPLL,
+ .src_0 = &clk_erefclk,
+ .src_1 = &clk_mpll,
+ }, {
+ .clk = &clk_usbsrc,
+ .bit = S3C2412_CLKSRC_USBCLK_HCLK,
+ .src_0 = &clk_usysclk,
+ .src_1 = &clk_h,
+ /* here we assume OM[4] select xtal */
+ }, {
+ .clk = &clk_erefclk,
+ .bit = S3C2412_CLKSRC_EREFCLK_EXTCLK,
+ .src_0 = &clk_xtal,
+ .src_1 = &clk_ext,
+ }, {
+ .clk = &clk_urefclk,
+ .bit = S3C2412_CLKSRC_UREFCLK_EXTCLK,
+ .src_0 = &clk_xtal,
+ .src_1 = &clk_ext,
+ },
+};
+
+/* s3c2412_clk_initparents
+ *
+ * Initialise the parents for the clocks that we get at start-time
+*/
+
+static void __init s3c2412_clk_initparents(void)
+{
+ unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
+ struct clk_init *cip = clks_src;
+ struct clk *src;
+ int ptr;
+ int ret;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) {
+ ret = s3c24xx_register_clock(cip->clk);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ cip->clk->name, ret);
+ }
+
+ src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0;
+
+ printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name);
+ clk_set_parent(cip->clk, src);
+ }
+}
+
+/* clocks to add straight away */
+
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_usb_bus,
+ &clk_mrefclk,
+ &clk_armclk,
+};
+
+int __init s3c2412_baseclk_add(void)
+{
+ unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
+ unsigned int dvs;
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ clk_upll.enable = s3c2412_upll_enable;
+ clk_usb_bus.parent = &clk_usbsrc;
+ clk_usb_bus.rate = 0x0;
+
+ clk_f.parent = &clk_msysclk;
+
+ s3c2412_clk_initparents();
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+ clkp = clks[ptr];
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+
+ /* set the dvs state according to what we got at boot time */
+
+ dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;
+
+ if (dvs)
+ clk_armclk.parent = &clk_h;
+
+ printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");
+
+ /* ensure usb bus clock is within correct rate of 48MHz */
+
+ if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
+ printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n");
+
+ /* for the moment, let's use the UPLL, and see if we can
+ * get 48MHz */
+
+ clk_set_parent(&clk_usysclk, &clk_upll);
+ clk_set_parent(&clk_usbsrc, &clk_usysclk);
+ clk_set_rate(&clk_usbsrc, 48*1000*1000);
+ }
+
+ printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
+ (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on",
+ print_mhz(clk_get_rate(&clk_upll)),
+ print_mhz(clk_get_rate(&clk_usb_bus)));
+
+ /* register clocks from clock array */
+
+ clkp = init_clocks;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+ /* ensure that we note the clock state */
+
+ clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+
+ /* We must be careful disabling the clocks we are not intending to
+ * be using at boot time, as subsystems such as the LCD which do
+ * their own DMA requests to the bus can cause the system to lockup
+ * if they where in the middle of requesting bus access.
+ *
+ * Disabling the LCD clock if the LCD is active is very dangerous,
+ * and therefore the bootloader should be careful to not enable
+ * the LCD clock if it is not needed.
+ */
+
+ /* install (and disable) the clocks we do not need immediately */
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+
+ s3c2412_clkcon_enable(clkp, 0);
+ }
+
+ s3c_pwmclk_init();
+ return 0;
+}
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
new file mode 100644
index 00000000..eb3ea172
--- /dev/null
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -0,0 +1,257 @@
+/* linux/arch/arm/mach-s3c2412/cpu-freq.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 CPU Frequency scalling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* our clock resources. */
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned int hdiv, pdiv, armdiv, dvs;
+ unsigned long hclk, fclk, armclk, armdiv_clk;
+ unsigned long hclk_max;
+
+ fclk = cfg->freq.fclk;
+ armclk = cfg->freq.armclk;
+ hclk_max = cfg->max.hclk;
+
+ /* We can't run hclk above armclk as at the best we have to
+ * have armclk and hclk in dvs mode. */
+
+ if (hclk_max > armclk)
+ hclk_max = armclk;
+
+ s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
+ __func__, fclk, armclk, hclk_max);
+ s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
+ __func__, cfg->freq.fclk, cfg->freq.armclk,
+ cfg->freq.hclk, cfg->freq.pclk);
+
+ armdiv = fclk / armclk;
+
+ if (armdiv < 1)
+ armdiv = 1;
+ if (armdiv > 2)
+ armdiv = 2;
+
+ cfg->divs.arm_divisor = armdiv;
+ armdiv_clk = fclk / armdiv;
+
+ hdiv = armdiv_clk / hclk_max;
+ if (hdiv < 1)
+ hdiv = 1;
+
+ cfg->freq.hclk = hclk = armdiv_clk / hdiv;
+
+ /* set dvs depending on whether we reached armclk or not. */
+ cfg->divs.dvs = dvs = armclk < armdiv_clk;
+
+ /* update the actual armclk we achieved. */
+ cfg->freq.armclk = dvs ? hclk : armdiv_clk;
+
+ s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
+ __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
+
+ if (hdiv > 4)
+ goto invalid;
+
+ pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+ if ((hclk / pdiv) > cfg->max.pclk)
+ pdiv++;
+
+ cfg->freq.pclk = hclk / pdiv;
+
+ s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+ if (pdiv > 2)
+ goto invalid;
+
+ pdiv *= hdiv;
+
+ /* store the result, and then return */
+
+ cfg->divs.h_divisor = hdiv * armdiv;
+ cfg->divs.p_divisor = pdiv * armdiv;
+
+ return 0;
+
+ invalid:
+ return -EINVAL;
+}
+
+static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long clkdiv;
+ unsigned long olddiv;
+
+ olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+
+ /* clear off current clock info */
+
+ clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
+ clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
+ clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
+
+ if (cfg->divs.arm_divisor == 2)
+ clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
+
+ clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
+
+ if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+ clkdiv |= S3C2412_CLKDIVN_PDIVN;
+
+ s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+ clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ struct s3c_cpufreq_board *board = cfg->board;
+ unsigned long refresh;
+
+ s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
+ board->refresh, cfg->freq.hclk);
+
+ /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+ * by 10 each to ensure that we do not overflow 32 bit numbers. This
+ * should work for HCLK up to 133MHz and refresh period up to 30usec.
+ */
+
+ refresh = (board->refresh / 10);
+ refresh *= (cfg->freq.hclk / 100);
+ refresh /= (1 * 1000 * 1000); /* 10^6 */
+
+ s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
+ __raw_writel(refresh, S3C2412_REFRESH);
+}
+
+/* set the default cpu frequency information, based on an 200MHz part
+ * as we have no other way of detecting the speed rating in software.
+ */
+
+static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
+ .max = {
+ .fclk = 200000000,
+ .hclk = 100000000,
+ .pclk = 50000000,
+ },
+
+ .latency = 5000000, /* 5ms */
+
+ .locktime_m = 150,
+ .locktime_u = 150,
+ .locktime_bits = 16,
+
+ .name = "s3c2412",
+ .set_refresh = s3c2412_cpufreq_setrefresh,
+ .set_divs = s3c2412_cpufreq_setdivs,
+ .calc_divs = s3c2412_cpufreq_calcdivs,
+
+ .calc_iotiming = s3c2412_iotiming_calc,
+ .set_iotiming = s3c2412_iotiming_set,
+ .get_iotiming = s3c2412_iotiming_get,
+
+ .resume_clocks = s3c2412_setup_clocks,
+
+ .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
+};
+
+static int s3c2412_cpufreq_add(struct sys_device *sysdev)
+{
+ unsigned long fclk_rate;
+
+ hclk = clk_get(NULL, "hclk");
+ if (IS_ERR(hclk)) {
+ printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
+ return -ENOENT;
+ }
+
+ fclk = clk_get(NULL, "fclk");
+ if (IS_ERR(fclk)) {
+ printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
+ goto err_fclk;
+ }
+
+ fclk_rate = clk_get_rate(fclk);
+ if (fclk_rate > 200000000) {
+ printk(KERN_INFO
+ "%s: fclk %ld MHz, assuming 266MHz capable part\n",
+ __func__, fclk_rate / 1000000);
+ s3c2412_cpufreq_info.max.fclk = 266000000;
+ s3c2412_cpufreq_info.max.hclk = 133000000;
+ s3c2412_cpufreq_info.max.pclk = 66000000;
+ }
+
+ armclk = clk_get(NULL, "armclk");
+ if (IS_ERR(armclk)) {
+ printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
+ goto err_armclk;
+ }
+
+ xtal = clk_get(NULL, "xtal");
+ if (IS_ERR(xtal)) {
+ printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
+ goto err_xtal;
+ }
+
+ return s3c_cpufreq_register(&s3c2412_cpufreq_info);
+
+err_xtal:
+ clk_put(armclk);
+err_armclk:
+ clk_put(fclk);
+err_fclk:
+ clk_put(hclk);
+
+ return -ENOENT;
+}
+
+static struct sysdev_driver s3c2412_cpufreq_driver = {
+ .add = s3c2412_cpufreq_add,
+};
+
+static int s3c2412_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2412_sysclass,
+ &s3c2412_cpufreq_driver);
+}
+
+arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
new file mode 100644
index 00000000..7abecfca
--- /dev/null
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -0,0 +1,195 @@
+/* linux/arch/arm/mach-s3c2412/dma.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 DMA selection
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <mach/dma.h>
+
+#include <plat/dma-s3c24xx.h>
+#include <plat/cpu.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
+#include <plat/regs-iis.h>
+#include <plat/regs-spi.h>
+
+#define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }
+
+static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
+ [DMACH_XD0] = {
+ .name = "xdreq0",
+ .channels = MAP(S3C2412_DMAREQSEL_XDREQ0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ0),
+ },
+ [DMACH_XD1] = {
+ .name = "xdreq1",
+ .channels = MAP(S3C2412_DMAREQSEL_XDREQ1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ1),
+ },
+ [DMACH_SDI] = {
+ .name = "sdi",
+ .channels = MAP(S3C2412_DMAREQSEL_SDI),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_SDI),
+ .hw_addr.to = S3C2410_PA_SDI + S3C2410_SDIDATA,
+ .hw_addr.from = S3C2410_PA_SDI + S3C2410_SDIDATA,
+ },
+ [DMACH_SPI0] = {
+ .name = "spi0",
+ .channels = MAP(S3C2412_DMAREQSEL_SPI0TX),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX),
+ .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
+ },
+ [DMACH_SPI1] = {
+ .name = "spi1",
+ .channels = MAP(S3C2412_DMAREQSEL_SPI1TX),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX),
+ .hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT,
+ },
+ [DMACH_UART0] = {
+ .name = "uart0",
+ .channels = MAP(S3C2412_DMAREQSEL_UART0_0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0),
+ .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
+ },
+ [DMACH_UART1] = {
+ .name = "uart1",
+ .channels = MAP(S3C2412_DMAREQSEL_UART1_0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0),
+ .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
+ },
+ [DMACH_UART2] = {
+ .name = "uart2",
+ .channels = MAP(S3C2412_DMAREQSEL_UART2_0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0),
+ .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
+ },
+ [DMACH_UART0_SRC2] = {
+ .name = "uart0",
+ .channels = MAP(S3C2412_DMAREQSEL_UART0_1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1),
+ .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
+ },
+ [DMACH_UART1_SRC2] = {
+ .name = "uart1",
+ .channels = MAP(S3C2412_DMAREQSEL_UART1_1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1),
+ .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
+ },
+ [DMACH_UART2_SRC2] = {
+ .name = "uart2",
+ .channels = MAP(S3C2412_DMAREQSEL_UART2_1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1),
+ .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
+ },
+ [DMACH_TIMER] = {
+ .name = "timer",
+ .channels = MAP(S3C2412_DMAREQSEL_TIMER),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_TIMER),
+ },
+ [DMACH_I2S_IN] = {
+ .name = "i2s-sdi",
+ .channels = MAP(S3C2412_DMAREQSEL_I2SRX),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_I2SRX),
+ },
+ [DMACH_I2S_OUT] = {
+ .name = "i2s-sdo",
+ .channels = MAP(S3C2412_DMAREQSEL_I2STX),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_I2STX),
+ },
+ [DMACH_USB_EP1] = {
+ .name = "usb-ep1",
+ .channels = MAP(S3C2412_DMAREQSEL_USBEP1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP1),
+ },
+ [DMACH_USB_EP2] = {
+ .name = "usb-ep2",
+ .channels = MAP(S3C2412_DMAREQSEL_USBEP2),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP2),
+ },
+ [DMACH_USB_EP3] = {
+ .name = "usb-ep3",
+ .channels = MAP(S3C2412_DMAREQSEL_USBEP3),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP3),
+ },
+ [DMACH_USB_EP4] = {
+ .name = "usb-ep4",
+ .channels = MAP(S3C2412_DMAREQSEL_USBEP4),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP4),
+ },
+};
+
+static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map,
+ enum s3c2410_dmasrc dir)
+{
+ unsigned long chsel;
+
+ if (dir == S3C2410_DMASRC_HW)
+ chsel = map->channels_rx[0];
+ else
+ chsel = map->channels[0];
+
+ chsel &= ~DMA_CH_VALID;
+ chsel |= S3C2412_DMAREQSEL_HW;
+
+ writel(chsel, chan->regs + S3C2412_DMA_DMAREQSEL);
+}
+
+static void s3c2412_dma_select(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map)
+{
+ s3c2412_dma_direction(chan, map, chan->source);
+}
+
+static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
+ .select = s3c2412_dma_select,
+ .direction = s3c2412_dma_direction,
+ .dcon_mask = 0,
+ .map = s3c2412_dma_mappings,
+ .map_size = ARRAY_SIZE(s3c2412_dma_mappings),
+};
+
+static int __init s3c2412_dma_add(struct sys_device *sysdev)
+{
+ s3c2410_dma_init();
+ return s3c24xx_dma_init_map(&s3c2412_dma_sel);
+}
+
+static struct sysdev_driver s3c2412_dma_driver = {
+ .add = s3c2412_dma_add,
+};
+
+static int __init s3c2412_dma_init(void)
+{
+ return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_dma_driver);
+}
+
+arch_initcall(s3c2412_dma_init);
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
new file mode 100644
index 00000000..3404a876
--- /dev/null
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -0,0 +1,62 @@
+/* linux/arch/arm/mach-s3c2412/gpio.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * S3C2412/S3C2413 specific GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+
+#include <plat/gpio-core.h>
+
+int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned long offs = pin - chip->chip.base;
+ unsigned long flags;
+ unsigned long slpcon;
+
+ offs *= 2;
+
+ if (pin < S3C2410_GPB(0))
+ return -EINVAL;
+
+ if (pin >= S3C2410_GPF(0) &&
+ pin <= S3C2410_GPG(16))
+ return -EINVAL;
+
+ if (pin > S3C2410_GPH(16))
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ slpcon = __raw_readl(chip->base + 0x0C);
+
+ slpcon &= ~(3 << offs);
+ slpcon |= state << offs;
+
+ __raw_writel(slpcon, chip->base + 0x0C);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
new file mode 100644
index 00000000..1a1aa220
--- /dev/null
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -0,0 +1,212 @@
+/* linux/arch/arm/mach-s3c2412/irq.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-power.h>
+
+#include <plat/cpu.h>
+#include <plat/irq.h>
+#include <plat/pm.h>
+
+#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
+#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
+
+/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
+ * having them turn up in both the INT* and the EINT* registers. Whilst
+ * both show the status, they both now need to be acked when the IRQs
+ * go off.
+*/
+
+static void
+s3c2412_irq_mask(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
+ unsigned long mask;
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ __raw_writel(mask | bitval, S3C2410_INTMSK);
+
+ mask = __raw_readl(S3C2412_EINTMASK);
+ __raw_writel(mask | bitval, S3C2412_EINTMASK);
+}
+
+static inline void
+s3c2412_irq_ack(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
+
+ __raw_writel(bitval, S3C2412_EINTPEND);
+ __raw_writel(bitval, S3C2410_SRCPND);
+ __raw_writel(bitval, S3C2410_INTPND);
+}
+
+static inline void
+s3c2412_irq_maskack(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
+ unsigned long mask;
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ __raw_writel(mask|bitval, S3C2410_INTMSK);
+
+ mask = __raw_readl(S3C2412_EINTMASK);
+ __raw_writel(mask | bitval, S3C2412_EINTMASK);
+
+ __raw_writel(bitval, S3C2412_EINTPEND);
+ __raw_writel(bitval, S3C2410_SRCPND);
+ __raw_writel(bitval, S3C2410_INTPND);
+}
+
+static void
+s3c2412_irq_unmask(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
+ unsigned long mask;
+
+ mask = __raw_readl(S3C2412_EINTMASK);
+ __raw_writel(mask & ~bitval, S3C2412_EINTMASK);
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ __raw_writel(mask & ~bitval, S3C2410_INTMSK);
+}
+
+static struct irq_chip s3c2412_irq_eint0t4 = {
+ .irq_ack = s3c2412_irq_ack,
+ .irq_mask = s3c2412_irq_mask,
+ .irq_unmask = s3c2412_irq_unmask,
+ .irq_set_wake = s3c_irq_wake,
+ .irq_set_type = s3c_irqext_type,
+};
+
+#define INTBIT(x) (1 << ((x) - S3C2410_IRQSUB(0)))
+
+/* CF and SDI sub interrupts */
+
+static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+
+ if (subsrc & INTBIT(IRQ_S3C2412_SDI))
+ generic_handle_irq(IRQ_S3C2412_SDI);
+
+ if (subsrc & INTBIT(IRQ_S3C2412_CF))
+ generic_handle_irq(IRQ_S3C2412_CF);
+}
+
+#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0))
+#define SUBMSK_CFSDI INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF)
+
+static void s3c2412_irq_cfsdi_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
+}
+
+static void s3c2412_irq_cfsdi_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_CFSDI);
+}
+
+static void s3c2412_irq_cfsdi_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
+}
+
+static struct irq_chip s3c2412_irq_cfsdi = {
+ .name = "s3c2412-cfsdi",
+ .irq_ack = s3c2412_irq_cfsdi_ack,
+ .irq_mask = s3c2412_irq_cfsdi_mask,
+ .irq_unmask = s3c2412_irq_cfsdi_unmask,
+};
+
+static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state)
+{
+ unsigned long pwrcfg;
+
+ pwrcfg = __raw_readl(S3C2412_PWRCFG);
+ if (state)
+ pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ;
+ else
+ pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ;
+ __raw_writel(pwrcfg, S3C2412_PWRCFG);
+
+ return s3c_irq_chip.irq_set_wake(data, state);
+}
+
+static struct irq_chip s3c2412_irq_rtc_chip;
+
+static int s3c2412_irq_add(struct sys_device *sysdev)
+{
+ unsigned int irqno;
+
+ for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4,
+ handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ /* add demux support for CF/SDI */
+
+ irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi);
+
+ for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) {
+ irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ /* change RTC IRQ's set wake method */
+
+ s3c2412_irq_rtc_chip = s3c_irq_chip;
+ s3c2412_irq_rtc_chip.irq_set_wake = s3c2412_irq_rtc_wake;
+
+ irq_set_chip(IRQ_RTC, &s3c2412_irq_rtc_chip);
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2412_irq_driver = {
+ .add = s3c2412_irq_add,
+};
+
+static int s3c2412_irq_init(void)
+{
+ return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_irq_driver);
+}
+
+arch_initcall(s3c2412_irq_init);
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
new file mode 100644
index 00000000..85dcaeb9
--- /dev/null
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -0,0 +1,677 @@
+/* linux/arch/arm/mach-s3c2410/mach-jive.c
+ *
+ * Copyright 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+
+#include <video/ili9320.h>
+
+#include <linux/spi/spi.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <plat/regs-serial.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+
+#include <mach/regs-power.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/spi-gpio.h>
+#include <mach/fb.h>
+
+#include <asm/mach-types.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/udc.h>
+
+static struct map_desc jive_iodesc[] __initdata = {
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg jive_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+/* Jive flash assignment
+ *
+ * 0x00000000-0x00028000 : uboot
+ * 0x00028000-0x0002c000 : uboot env
+ * 0x0002c000-0x00030000 : spare
+ * 0x00030000-0x00200000 : zimage A
+ * 0x00200000-0x01600000 : cramfs A
+ * 0x01600000-0x017d0000 : zimage B
+ * 0x017d0000-0x02bd0000 : cramfs B
+ * 0x02bd0000-0x03fd0000 : yaffs
+ */
+static struct mtd_partition __initdata jive_imageA_nand_part[] = {
+
+#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
+ /* Don't allow access to the bootloader from linux */
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = (160 * SZ_1K),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+
+ /* spare */
+ {
+ .name = "spare",
+ .offset = (176 * SZ_1K),
+ .size = (16 * SZ_1K),
+ },
+#endif
+
+ /* booted images */
+ {
+ .name = "kernel (ro)",
+ .offset = (192 * SZ_1K),
+ .size = (SZ_2M) - (192 * SZ_1K),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "root (ro)",
+ .offset = (SZ_2M),
+ .size = (20 * SZ_1M),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+
+ /* yaffs */
+ {
+ .name = "yaffs",
+ .offset = (44 * SZ_1M),
+ .size = (20 * SZ_1M),
+ },
+
+ /* bootloader environment */
+ {
+ .name = "env",
+ .offset = (160 * SZ_1K),
+ .size = (16 * SZ_1K),
+ },
+
+ /* upgrade images */
+ {
+ .name = "zimage",
+ .offset = (22 * SZ_1M),
+ .size = (2 * SZ_1M) - (192 * SZ_1K),
+ }, {
+ .name = "cramfs",
+ .offset = (24 * SZ_1M) - (192*SZ_1K),
+ .size = (20 * SZ_1M),
+ },
+};
+
+static struct mtd_partition __initdata jive_imageB_nand_part[] = {
+
+#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
+ /* Don't allow access to the bootloader from linux */
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = (160 * SZ_1K),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+
+ /* spare */
+ {
+ .name = "spare",
+ .offset = (176 * SZ_1K),
+ .size = (16 * SZ_1K),
+ },
+#endif
+
+ /* booted images */
+ {
+ .name = "kernel (ro)",
+ .offset = (22 * SZ_1M),
+ .size = (2 * SZ_1M) - (192 * SZ_1K),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "root (ro)",
+ .offset = (24 * SZ_1M) - (192 * SZ_1K),
+ .size = (20 * SZ_1M),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+
+ /* yaffs */
+ {
+ .name = "yaffs",
+ .offset = (44 * SZ_1M),
+ .size = (20 * SZ_1M),
+ },
+
+ /* bootloader environment */
+ {
+ .name = "env",
+ .offset = (160 * SZ_1K),
+ .size = (16 * SZ_1K),
+ },
+
+ /* upgrade images */
+ {
+ .name = "zimage",
+ .offset = (192 * SZ_1K),
+ .size = (2 * SZ_1M) - (192 * SZ_1K),
+ }, {
+ .name = "cramfs",
+ .offset = (2 * SZ_1M),
+ .size = (20 * SZ_1M),
+ },
+};
+
+static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
+ [0] = {
+ .name = "flash",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(jive_imageA_nand_part),
+ .partitions = jive_imageA_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand __initdata jive_nand_info = {
+ /* set taken from osiris nand timings, possibly still conservative */
+ .tacls = 30,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .sets = jive_nand_sets,
+ .nr_sets = ARRAY_SIZE(jive_nand_sets),
+};
+
+static int __init jive_mtdset(char *options)
+{
+ struct s3c2410_nand_set *nand = &jive_nand_sets[0];
+ unsigned long set;
+
+ if (options == NULL || options[0] == '\0')
+ return 0;
+
+ if (strict_strtoul(options, 10, &set)) {
+ printk(KERN_ERR "failed to parse mtdset=%s\n", options);
+ return 0;
+ }
+
+ switch (set) {
+ case 1:
+ nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
+ nand->partitions = jive_imageB_nand_part;
+ case 0:
+ /* this is already setup in the nand info */
+ break;
+ default:
+ printk(KERN_ERR "Unknown mtd set %ld specified,"
+ "using default.", set);
+ }
+
+ return 0;
+}
+
+/* parse the mtdset= option given to the kernel command line */
+__setup("mtdset=", jive_mtdset);
+
+/* LCD timing and setup */
+
+#define LCD_XRES (240)
+#define LCD_YRES (320)
+#define LCD_LEFT_MARGIN (12)
+#define LCD_RIGHT_MARGIN (12)
+#define LCD_LOWER_MARGIN (12)
+#define LCD_UPPER_MARGIN (12)
+#define LCD_VSYNC (2)
+#define LCD_HSYNC (2)
+
+#define LCD_REFRESH (60)
+
+#define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
+#define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
+
+static struct s3c2410fb_display jive_vgg2432a4_display[] = {
+ [0] = {
+ .width = LCD_XRES,
+ .height = LCD_YRES,
+ .xres = LCD_XRES,
+ .yres = LCD_YRES,
+ .left_margin = LCD_LEFT_MARGIN,
+ .right_margin = LCD_RIGHT_MARGIN,
+ .upper_margin = LCD_UPPER_MARGIN,
+ .lower_margin = LCD_LOWER_MARGIN,
+ .hsync_len = LCD_HSYNC,
+ .vsync_len = LCD_VSYNC,
+
+ .pixclock = (1000000000000LL /
+ (LCD_REFRESH * LCD_HTOT * LCD_VTOT)),
+
+ .bpp = 16,
+ .type = (S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT),
+
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_INVVDEN |
+ S3C2410_LCDCON5_PWREN),
+ },
+};
+
+/* todo - put into gpio header */
+
+#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
+#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
+
+static struct s3c2410fb_mach_info jive_lcd_config = {
+ .displays = jive_vgg2432a4_display,
+ .num_displays = ARRAY_SIZE(jive_vgg2432a4_display),
+ .default_display = 0,
+
+ /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
+ * and disable the pull down resistors on pins we are using for LCD
+ * data. */
+
+ .gpcup = (0xf << 1) | (0x3f << 10),
+
+ .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE |
+ S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
+ S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 |
+ S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 |
+ S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7),
+
+ .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) |
+ S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) |
+ S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
+ S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
+ S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
+
+ .gpdup = (0x3f << 2) | (0x3f << 10),
+
+ .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
+ S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 |
+ S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 |
+ S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
+ S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
+ S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
+
+ .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) |
+ S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) |
+ S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) |
+ S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
+ S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
+ S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+};
+
+/* ILI9320 support. */
+
+static void jive_lcm_reset(unsigned int set)
+{
+ printk(KERN_DEBUG "%s(%d)\n", __func__, set);
+
+ gpio_set_value(S3C2410_GPG(13), set);
+}
+
+#undef LCD_UPPER_MARGIN
+#define LCD_UPPER_MARGIN 2
+
+static struct ili9320_platdata jive_lcm_config = {
+ .hsize = LCD_XRES,
+ .vsize = LCD_YRES,
+
+ .reset = jive_lcm_reset,
+ .suspend = ILI9320_SUSPEND_DEEP,
+
+ .entry_mode = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
+ .display2 = (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) |
+ ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)),
+ .display3 = 0x0,
+ .display4 = 0x0,
+ .rgb_if1 = (ILI9320_RGBIF1_RIM_RGB18 |
+ ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF),
+ .rgb_if2 = ILI9320_RGBIF2_DPL,
+ .interface2 = 0x0,
+ .interface3 = 0x3,
+ .interface4 = (ILI9320_INTERFACE4_RTNE(16) |
+ ILI9320_INTERFACE4_DIVE(1)),
+ .interface5 = 0x0,
+ .interface6 = 0x0,
+};
+
+/* LCD SPI support */
+
+static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
+{
+ gpio_set_value(S3C2410_GPB(7), cs ? 0 : 1);
+}
+
+static struct s3c2410_spigpio_info jive_lcd_spi = {
+ .bus_num = 1,
+ .pin_clk = S3C2410_GPG(8),
+ .pin_mosi = S3C2410_GPB(8),
+ .num_chipselect = 1,
+ .chip_select = jive_lcd_spi_chipselect,
+};
+
+static struct platform_device jive_device_lcdspi = {
+ .name = "spi_s3c24xx_gpio",
+ .id = 1,
+ .num_resources = 0,
+ .dev.platform_data = &jive_lcd_spi,
+};
+
+/* WM8750 audio code SPI definition */
+
+static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
+{
+ gpio_set_value(S3C2410_GPH(10), cs ? 0 : 1);
+}
+
+static struct s3c2410_spigpio_info jive_wm8750_spi = {
+ .bus_num = 2,
+ .pin_clk = S3C2410_GPB(4),
+ .pin_mosi = S3C2410_GPB(9),
+ .num_chipselect = 1,
+ .chip_select = jive_wm8750_chipselect,
+};
+
+static struct platform_device jive_device_wm8750 = {
+ .name = "spi_s3c24xx_gpio",
+ .id = 2,
+ .num_resources = 0,
+ .dev.platform_data = &jive_wm8750_spi,
+};
+
+/* JIVE SPI devices. */
+
+static struct spi_board_info __initdata jive_spi_devs[] = {
+ [0] = {
+ .modalias = "VGG2432A4",
+ .bus_num = 1,
+ .chip_select = 0,
+ .mode = SPI_MODE_3, /* CPOL=1, CPHA=1 */
+ .max_speed_hz = 100000,
+ .platform_data = &jive_lcm_config,
+ }, {
+ .modalias = "WM8750",
+ .bus_num = 2,
+ .chip_select = 0,
+ .mode = SPI_MODE_0, /* CPOL=0, CPHA=0 */
+ .max_speed_hz = 100000,
+ },
+};
+
+/* I2C bus and device configuration. */
+
+static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
+ .frequency = 80 * 1000,
+ .flags = S3C_IICFLG_FILTER,
+ .sda_delay = 2,
+};
+
+static struct i2c_board_info jive_i2c_devs[] __initdata = {
+ [0] = {
+ I2C_BOARD_INFO("lis302dl", 0x1c),
+ .irq = IRQ_EINT14,
+ },
+};
+
+/* The platform devices being used. */
+
+static struct platform_device *jive_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_lcd,
+ &jive_device_lcdspi,
+ &jive_device_wm8750,
+ &s3c_device_nand,
+ &s3c_device_usbgadget,
+};
+
+static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
+ .vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */
+};
+
+/* Jive power management device */
+
+#ifdef CONFIG_PM
+static int jive_pm_suspend(void)
+{
+ /* Write the magic value u-boot uses to check for resume into
+ * the INFORM0 register, and ensure INFORM1 is set to the
+ * correct address to resume from. */
+
+ __raw_writel(0x2BED, S3C2412_INFORM0);
+ __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
+
+ return 0;
+}
+
+static void jive_pm_resume(void)
+{
+ __raw_writel(0x0, S3C2412_INFORM0);
+}
+
+#else
+#define jive_pm_suspend NULL
+#define jive_pm_resume NULL
+#endif
+
+static struct syscore_ops jive_pm_syscore_ops = {
+ .suspend = jive_pm_suspend,
+ .resume = jive_pm_resume,
+};
+
+static void __init jive_map_io(void)
+{
+ s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
+}
+
+static void jive_power_off(void)
+{
+ printk(KERN_INFO "powering system down...\n");
+
+ s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+ s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
+}
+
+static void __init jive_machine_init(void)
+{
+ /* register system core operations for managing low level suspend */
+
+ register_syscore_ops(&jive_pm_syscore_ops);
+
+ /* write our sleep configurations for the IO. Pull down all unused
+ * IO, ensure that we have turned off all peripherals we do not
+ * need, and configure the ones we do need. */
+
+ /* Port B sleep */
+
+ __raw_writel(S3C2412_SLPCON_IN(0) |
+ S3C2412_SLPCON_PULL(1) |
+ S3C2412_SLPCON_HIGH(2) |
+ S3C2412_SLPCON_PULL(3) |
+ S3C2412_SLPCON_PULL(4) |
+ S3C2412_SLPCON_PULL(5) |
+ S3C2412_SLPCON_PULL(6) |
+ S3C2412_SLPCON_HIGH(7) |
+ S3C2412_SLPCON_PULL(8) |
+ S3C2412_SLPCON_PULL(9) |
+ S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
+
+ /* Port C sleep */
+
+ __raw_writel(S3C2412_SLPCON_PULL(0) |
+ S3C2412_SLPCON_PULL(1) |
+ S3C2412_SLPCON_PULL(2) |
+ S3C2412_SLPCON_PULL(3) |
+ S3C2412_SLPCON_PULL(4) |
+ S3C2412_SLPCON_PULL(5) |
+ S3C2412_SLPCON_LOW(6) |
+ S3C2412_SLPCON_PULL(6) |
+ S3C2412_SLPCON_PULL(7) |
+ S3C2412_SLPCON_PULL(8) |
+ S3C2412_SLPCON_PULL(9) |
+ S3C2412_SLPCON_PULL(10) |
+ S3C2412_SLPCON_PULL(11) |
+ S3C2412_SLPCON_PULL(12) |
+ S3C2412_SLPCON_PULL(13) |
+ S3C2412_SLPCON_PULL(14) |
+ S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
+
+ /* Port D sleep */
+
+ __raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
+
+ /* Port F sleep */
+
+ __raw_writel(S3C2412_SLPCON_LOW(0) |
+ S3C2412_SLPCON_LOW(1) |
+ S3C2412_SLPCON_LOW(2) |
+ S3C2412_SLPCON_EINT(3) |
+ S3C2412_SLPCON_EINT(4) |
+ S3C2412_SLPCON_EINT(5) |
+ S3C2412_SLPCON_EINT(6) |
+ S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
+
+ /* Port G sleep */
+
+ __raw_writel(S3C2412_SLPCON_IN(0) |
+ S3C2412_SLPCON_IN(1) |
+ S3C2412_SLPCON_IN(2) |
+ S3C2412_SLPCON_IN(3) |
+ S3C2412_SLPCON_IN(4) |
+ S3C2412_SLPCON_IN(5) |
+ S3C2412_SLPCON_IN(6) |
+ S3C2412_SLPCON_IN(7) |
+ S3C2412_SLPCON_PULL(8) |
+ S3C2412_SLPCON_PULL(9) |
+ S3C2412_SLPCON_IN(10) |
+ S3C2412_SLPCON_PULL(11) |
+ S3C2412_SLPCON_PULL(12) |
+ S3C2412_SLPCON_PULL(13) |
+ S3C2412_SLPCON_IN(14) |
+ S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
+
+ /* Port H sleep */
+
+ __raw_writel(S3C2412_SLPCON_PULL(0) |
+ S3C2412_SLPCON_PULL(1) |
+ S3C2412_SLPCON_PULL(2) |
+ S3C2412_SLPCON_PULL(3) |
+ S3C2412_SLPCON_PULL(4) |
+ S3C2412_SLPCON_PULL(5) |
+ S3C2412_SLPCON_PULL(6) |
+ S3C2412_SLPCON_IN(7) |
+ S3C2412_SLPCON_IN(8) |
+ S3C2412_SLPCON_PULL(9) |
+ S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
+
+ /* initialise the power management now we've setup everything. */
+
+ s3c_pm_init();
+
+ /** TODO - check that this is after the cmdline option! */
+ s3c_nand_set_platdata(&jive_nand_info);
+
+ /* initialise the spi */
+
+ gpio_request(S3C2410_GPG(13), "lcm reset");
+ gpio_direction_output(S3C2410_GPG(13), 0);
+
+ gpio_request(S3C2410_GPB(7), "jive spi");
+ gpio_direction_output(S3C2410_GPB(7), 1);
+
+ s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
+ s3c_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
+
+ s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
+ s3c_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
+
+ /* initialise the WM8750 spi */
+
+ gpio_request(S3C2410_GPH(10), "jive wm8750 spi");
+ gpio_direction_output(S3C2410_GPH(10), 1);
+
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ s3c24xx_udc_set_platdata(&jive_udc_cfg);
+ s3c24xx_fb_set_platdata(&jive_lcd_config);
+
+ spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
+
+ s3c_i2c0_set_platdata(&jive_i2c_cfg);
+ i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
+
+ pm_power_off = jive_power_off;
+
+ platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
+}
+
+MACHINE_START(JIVE, "JIVE")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+
+ .init_irq = s3c24xx_init_irq,
+ .map_io = jive_map_io,
+ .init_machine = jive_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
new file mode 100644
index 00000000..834cfb61
--- /dev/null
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -0,0 +1,160 @@
+/* linux/arch/arm/mach-s3c2412/mach-smdk2413.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Thanks to Dimity Andric (TomTom) and Steven Ryu (Samsung) for the
+ * loans of SMDK2413 to work with.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+//#include <asm/debug-ll.h>
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
+
+#include <mach/idle.h>
+#include <plat/udc.h>
+#include <plat/iic.h>
+#include <mach/fb.h>
+
+#include <plat/s3c2410.h>
+#include <plat/s3c2412.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include <plat/common-smdk.h>
+
+static struct map_desc smdk2413_iodesc[] __initdata = {
+};
+
+static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ }
+};
+
+
+static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
+ .pullup_pin = S3C2410_GPF(2),
+};
+
+
+static struct platform_device *smdk2413_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_usbgadget,
+};
+
+static void __init smdk2413_fixup(struct machine_desc *desc,
+ struct tag *tags, char **cmdline,
+ struct meminfo *mi)
+{
+ if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
+ mi->nr_banks=1;
+ mi->bank[0].start = 0x30000000;
+ mi->bank[0].size = SZ_64M;
+ }
+}
+
+static void __init smdk2413_map_io(void)
+{
+ s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
+}
+
+static void __init smdk2413_machine_init(void)
+{ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+
+ s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
+ s3c_i2c0_set_platdata(NULL);
+
+ platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
+ smdk_machine_init();
+}
+
+MACHINE_START(S3C2413, "S3C2413")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+
+ .fixup = smdk2413_fixup,
+ .init_irq = s3c24xx_init_irq,
+ .map_io = smdk2413_map_io,
+ .init_machine = smdk2413_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
+
+MACHINE_START(SMDK2412, "SMDK2412")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+
+ .fixup = smdk2413_fixup,
+ .init_irq = s3c24xx_init_irq,
+ .map_io = smdk2413_map_io,
+ .init_machine = smdk2413_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
+
+MACHINE_START(SMDK2413, "SMDK2413")
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+
+ .fixup = smdk2413_fixup,
+ .init_irq = s3c24xx_init_irq,
+ .map_io = smdk2413_map_io,
+ .init_machine = smdk2413_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
new file mode 100644
index 00000000..83544ebe
--- /dev/null
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -0,0 +1,166 @@
+/* linux/arch/arm/mach-s3c2412/mach-vstms.c
+ *
+ * (C) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
+
+#include <mach/idle.h>
+#include <mach/fb.h>
+
+#include <plat/iic.h>
+#include <plat/nand.h>
+
+#include <plat/s3c2410.h>
+#include <plat/s3c2412.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+
+static struct map_desc vstms_iodesc[] __initdata = {
+};
+
+static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ }
+};
+
+static struct mtd_partition __initdata vstms_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = 0x7C000,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "UBoot Config",
+ .offset = 0x7C000,
+ .size = 0x4000,
+ },
+ [2] = {
+ .name = "Kernel",
+ .offset = 0x80000,
+ .size = 0x200000,
+ },
+ [3] = {
+ .name = "RFS",
+ .offset = 0x280000,
+ .size = 0x3d80000,
+ },
+};
+
+static struct s3c2410_nand_set __initdata vstms_nand_sets[] = {
+ [0] = {
+ .name = "NAND",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(vstms_nand_part),
+ .partitions = vstms_nand_part,
+ },
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+*/
+
+static struct s3c2410_platform_nand __initdata vstms_nand_info = {
+ .tacls = 20,
+ .twrph0 = 60,
+ .twrph1 = 20,
+ .nr_sets = ARRAY_SIZE(vstms_nand_sets),
+ .sets = vstms_nand_sets,
+};
+
+static struct platform_device *vstms_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+};
+
+static void __init vstms_fixup(struct machine_desc *desc,
+ struct tag *tags, char **cmdline,
+ struct meminfo *mi)
+{
+ if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
+ mi->nr_banks=1;
+ mi->bank[0].start = 0x30000000;
+ mi->bank[0].size = SZ_64M;
+ }
+}
+
+static void __init vstms_map_io(void)
+{
+ s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
+}
+
+static void __init vstms_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_nand_set_platdata(&vstms_nand_info);
+
+ platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
+}
+
+MACHINE_START(VSTMS, "VSTMS")
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+
+ .fixup = vstms_fixup,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = vstms_init,
+ .map_io = vstms_map_io,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
new file mode 100644
index 00000000..752b13a7
--- /dev/null
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -0,0 +1,122 @@
+/* linux/arch/arm/mach-s3c2412/pm.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/cacheflush.h>
+#include <asm/irq.h>
+
+#include <mach/regs-power.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-dsc.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include <plat/s3c2412.h>
+
+extern void s3c2412_sleep_enter(void);
+
+static void s3c2412_cpu_suspend(void)
+{
+ unsigned long tmp;
+
+ flush_cache_all();
+
+ /* set our standby method to sleep */
+
+ tmp = __raw_readl(S3C2412_PWRCFG);
+ tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP;
+ __raw_writel(tmp, S3C2412_PWRCFG);
+
+ s3c2412_sleep_enter();
+}
+
+static void s3c2412_pm_prepare(void)
+{
+}
+
+static int s3c2412_pm_add(struct sys_device *sysdev)
+{
+ pm_cpu_prep = s3c2412_pm_prepare;
+ pm_cpu_sleep = s3c2412_cpu_suspend;
+
+ return 0;
+}
+
+static struct sleep_save s3c2412_sleep[] = {
+ SAVE_ITEM(S3C2412_DSC0),
+ SAVE_ITEM(S3C2412_DSC1),
+ SAVE_ITEM(S3C2413_GPJDAT),
+ SAVE_ITEM(S3C2413_GPJCON),
+ SAVE_ITEM(S3C2413_GPJUP),
+
+ /* save the PWRCFG to get back to original sleep method */
+
+ SAVE_ITEM(S3C2412_PWRCFG),
+
+ /* save the sleep configuration anyway, just in case these
+ * get damaged during wakeup */
+
+ SAVE_ITEM(S3C2412_GPBSLPCON),
+ SAVE_ITEM(S3C2412_GPCSLPCON),
+ SAVE_ITEM(S3C2412_GPDSLPCON),
+ SAVE_ITEM(S3C2412_GPFSLPCON),
+ SAVE_ITEM(S3C2412_GPGSLPCON),
+ SAVE_ITEM(S3C2412_GPHSLPCON),
+ SAVE_ITEM(S3C2413_GPJSLPCON),
+};
+
+static struct sysdev_driver s3c2412_pm_driver = {
+ .add = s3c2412_pm_add,
+};
+
+static __init int s3c2412_pm_init(void)
+{
+ return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver);
+}
+
+arch_initcall(s3c2412_pm_init);
+
+static int s3c2412_pm_suspend(void)
+{
+ s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+ return 0;
+}
+
+static void s3c2412_pm_resume(void)
+{
+ unsigned long tmp;
+
+ tmp = __raw_readl(S3C2412_PWRCFG);
+ tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
+ tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
+ __raw_writel(tmp, S3C2412_PWRCFG);
+
+ s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+}
+
+struct syscore_ops s3c2412_pm_syscore_ops = {
+ .suspend = s3c2412_pm_suspend,
+ .resume = s3c2412_pm_resume,
+};
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
new file mode 100644
index 00000000..ef0958d3
--- /dev/null
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -0,0 +1,252 @@
+/* linux/arch/arm/mach-s3c2412/s3c2412.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/proc-fns.h>
+#include <asm/irq.h>
+
+#include <mach/reset.h>
+#include <mach/idle.h>
+
+#include <plat/cpu-freq.h>
+
+#include <mach/regs-clock.h>
+#include <plat/regs-serial.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
+#include <plat/regs-spi.h>
+#include <mach/regs-s3c2412.h>
+
+#include <plat/s3c2412.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/pm.h>
+#include <plat/pll.h>
+#include <plat/nand-core.h>
+
+#ifndef CONFIG_CPU_S3C2412_ONLY
+void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
+
+static inline void s3c2412_init_gpio2(void)
+{
+ s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
+}
+#else
+#define s3c2412_init_gpio2() do { } while(0)
+#endif
+
+/* Initial IO mappings */
+
+static struct map_desc s3c2412_iodesc[] __initdata = {
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(WATCHDOG),
+ {
+ .virtual = (unsigned long)S3C2412_VA_SSMC,
+ .pfn = __phys_to_pfn(S3C2412_PA_SSMC),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = (unsigned long)S3C2412_VA_EBI,
+ .pfn = __phys_to_pfn(S3C2412_PA_EBI),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+};
+
+/* uart registration process */
+
+void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no);
+
+ /* rename devices that are s3c2412/s3c2413 specific */
+ s3c_device_sdi.name = "s3c2412-sdi";
+ s3c_device_lcd.name = "s3c2412-lcd";
+ s3c_nand_setname("s3c2412-nand");
+
+ /* alter IRQ of SDI controller */
+
+ s3c_device_sdi.resource[1].start = IRQ_S3C2412_SDI;
+ s3c_device_sdi.resource[1].end = IRQ_S3C2412_SDI;
+
+ /* spi channel related changes, s3c2412/13 specific */
+ s3c_device_spi0.name = "s3c2412-spi";
+ s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24;
+ s3c_device_spi1.name = "s3c2412-spi";
+ s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1;
+ s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24;
+
+}
+
+/* s3c2412_idle
+ *
+ * use the standard idle call by ensuring the idle mode
+ * in power config, then issuing the idle co-processor
+ * instruction
+*/
+
+static void s3c2412_idle(void)
+{
+ unsigned long tmp;
+
+ /* ensure our idle mode is to go to idle */
+
+ tmp = __raw_readl(S3C2412_PWRCFG);
+ tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
+ tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
+ __raw_writel(tmp, S3C2412_PWRCFG);
+
+ cpu_do_idle();
+}
+
+static void s3c2412_hard_reset(void)
+{
+ /* errata "Watch-dog/Software Reset Problem" specifies that
+ * this reset must be done with the SYSCLK sourced from
+ * EXTCLK instead of FOUT to avoid a glitch in the reset
+ * mechanism.
+ *
+ * See the watchdog section of the S3C2412 manual for more
+ * information on this fix.
+ */
+
+ __raw_writel(0x00, S3C2412_CLKSRC);
+ __raw_writel(S3C2412_SWRST_RESET, S3C2412_SWRST);
+
+ mdelay(1);
+}
+
+/* s3c2412_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+*/
+
+void __init s3c2412_map_io(void)
+{
+ /* move base of IO */
+
+ s3c2412_init_gpio2();
+
+ /* set our idle function */
+
+ s3c24xx_idle = s3c2412_idle;
+
+ /* set custom reset hook */
+
+ s3c24xx_reset_hook = s3c2412_hard_reset;
+
+ /* register our io-tables */
+
+ iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
+}
+
+void __init_or_cpufreq s3c2412_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long tmp;
+ unsigned long xtal;
+ unsigned long fclk;
+ unsigned long hclk;
+ unsigned long pclk;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ /* now we've got our machine bits initialised, work out what
+ * clocks we've got */
+
+ fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
+
+ clk_mpll.rate = fclk;
+
+ tmp = __raw_readl(S3C2410_CLKDIVN);
+
+ /* work out clock scalings */
+
+ hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
+ hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1);
+ pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
+
+ /* print brieft summary of clocks, etc */
+
+ printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
+ print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
+
+ s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2412_init_clocks(int xtal)
+{
+ /* initialise the clocks here, to allow other things like the
+ * console to use them
+ */
+
+ s3c24xx_register_baseclocks(xtal);
+ s3c2412_setup_clocks();
+ s3c2412_baseclk_add();
+}
+
+/* need to register class before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2412 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+struct sysdev_class s3c2412_sysclass = {
+ .name = "s3c2412-core",
+};
+
+static int __init s3c2412_core_init(void)
+{
+ return sysdev_class_register(&s3c2412_sysclass);
+}
+
+core_initcall(s3c2412_core_init);
+
+static struct sys_device s3c2412_sysdev = {
+ .cls = &s3c2412_sysclass,
+};
+
+int __init s3c2412_init(void)
+{
+ printk("S3C2412: Initialising architecture\n");
+
+ register_syscore_ops(&s3c2412_pm_syscore_ops);
+ register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
+ return sysdev_register(&s3c2412_sysdev);
+}
diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c2412/sleep.S
new file mode 100644
index 00000000..c82418ed
--- /dev/null
+++ b/arch/arm/mach-s3c2412/sleep.S
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s3c2412/sleep.S
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 Power Manager low-level sleep support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <mach/regs-irq.h>
+
+ .text
+
+ .global s3c2412_sleep_enter
+
+s3c2412_sleep_enter:
+ mov r0, #0 /* argument for coprocessors */
+ ldr r1, =S3C2410_INTPND
+ ldr r2, =S3C2410_SRCPND
+ ldr r3, =S3C2410_EINTPEND
+
+ teq r0, r0
+ bl s3c2412_sleep_enter1
+ teq pc, r0
+ bl s3c2412_sleep_enter1
+
+ .align 5
+
+ /* this is called twice, first with the Z flag to ensure that the
+ * instructions have been loaded into the cache, and the second
+ * time to try and suspend the system.
+ */
+s3c2412_sleep_enter1:
+ mcr p15, 0, r0, c7, c10, 4
+ mcrne p15, 0, r0, c7, c0, 4
+
+ /* if we return from here, it is because an interrupt was
+ * active when we tried to shutdown. Try and ack the IRQ and
+ * retry, as simply returning causes the system to lock.
+ */
+
+ ldrne r9, [ r1 ]
+ strne r9, [ r1 ]
+ ldrne r9, [ r2 ]
+ strne r9, [ r2 ]
+ ldrne r9, [ r3 ]
+ strne r9, [ r3 ]
+ bne s3c2412_sleep_enter1
+
+ mov pc, r14
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-20 08:01:18 +0000