1 files changed, 412 insertions, 0 deletions
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
new file mode 100644
index 00000000..13518a70
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -0,0 +1,412 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x270.c
+ *
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <linux/rtc-v3020.h>
+#include <video/mbxfb.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/spi/libertas_spi.h>
+
+#include <mach/pxa27x.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+
+#include "generic.h"
+
+/* physical address if local-bus attached devices */
+#define RTC_PHYS_BASE		(PXA_CS1_PHYS + (5 << 22))
+
+/* GPIO IRQ usage */
+#define GPIO83_MMC_IRQ		(83)
+
+#define CMX270_MMC_IRQ		IRQ_GPIO(GPIO83_MMC_IRQ)
+
+/* MMC power enable */
+#define GPIO105_MMC_POWER	(105)
+
+/* WLAN GPIOS */
+#define GPIO19_WLAN_STRAP	(19)
+#define GPIO102_WLAN_RST	(102)
+
+static unsigned long cmx270_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MCI controller */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* LCD */
+	GPIOxx_LCD_TFT_16BPP,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* SSP2 */
+	GPIO19_GPIO,	/* SSP2 clock is used as GPIO for Libertas pin-strap */
+	GPIO14_GPIO,
+	GPIO87_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+	GPIO49_nPWE,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
+	GPIO105_GPIO	| MFP_LPM_DRIVE_HIGH,	/* MMC/SD power */
+	GPIO53_GPIO,				/* PC card reset */
+	GPIO102_GPIO,				/* WLAN reset */
+
+	/* NAND controls */
+	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO89_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO10_GPIO,	/* DM9000 interrupt */
+	GPIO83_GPIO,	/* MMC card detect */
+	GPIO95_GPIO,	/* WLAN interrupt */
+};
+
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
+static struct resource cmx270_v3020_resource[] = {
+	[0] = {
+		.start = RTC_PHYS_BASE,
+		.end   = RTC_PHYS_BASE + 4,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct v3020_platform_data cmx270_v3020_pdata = {
+	.leftshift = 16,
+};
+
+static struct platform_device cmx270_rtc_device = {
+	.name		= "v3020",
+	.num_resources	= ARRAY_SIZE(cmx270_v3020_resource),
+	.resource	= cmx270_v3020_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cmx270_v3020_pdata,
+	}
+};
+
+static void __init cmx270_init_rtc(void)
+{
+	platform_device_register(&cmx270_rtc_device);
+}
+#else
+static inline void cmx270_init_rtc(void) {}
+#endif
+
+/* 2700G graphics */
+#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
+static u64 fb_dma_mask = ~(u64)0;
+
+static struct resource cmx270_2700G_resource[] = {
+	/* frame buffer memory including ODFB and External SDRAM */
+	[0] = {
+		.start = PXA_CS2_PHYS,
+		.end   = PXA_CS2_PHYS + 0x01ffffff,
+		.flags = IORESOURCE_MEM,
+	},
+	/* Marathon registers */
+	[1] = {
+		.start = PXA_CS2_PHYS + 0x03fe0000,
+		.end   = PXA_CS2_PHYS + 0x03ffffff,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static unsigned long cmx270_marathon_on[] = {
+	GPIO58_GPIO,
+	GPIO59_GPIO,
+	GPIO60_GPIO,
+	GPIO61_GPIO,
+	GPIO62_GPIO,
+	GPIO63_GPIO,
+	GPIO64_GPIO,
+	GPIO65_GPIO,
+	GPIO66_GPIO,
+	GPIO67_GPIO,
+	GPIO68_GPIO,
+	GPIO69_GPIO,
+	GPIO70_GPIO,
+	GPIO71_GPIO,
+	GPIO72_GPIO,
+	GPIO73_GPIO,
+	GPIO74_GPIO,
+	GPIO75_GPIO,
+	GPIO76_GPIO,
+	GPIO77_GPIO,
+};
+
+static unsigned long cmx270_marathon_off[] = {
+	GPIOxx_LCD_TFT_16BPP,
+};
+
+static int cmx270_marathon_probe(struct fb_info *fb)
+{
+	int gpio, err;
+
+	for (gpio = 58; gpio <= 77; gpio++) {
+		err = gpio_request(gpio, "LCD");
+		if (err)
+			return err;
+		gpio_direction_input(gpio);
+	}
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on));
+	return 0;
+}
+
+static int cmx270_marathon_remove(struct fb_info *fb)
+{
+	int gpio;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off));
+
+	for (gpio = 58; gpio <= 77; gpio++)
+		gpio_free(gpio);
+
+	return 0;
+}
+
+static struct mbxfb_platform_data cmx270_2700G_data = {
+	.xres = {
+		.min = 240,
+		.max = 1200,
+		.defval = 640,
+	},
+	.yres = {
+		.min = 240,
+		.max = 1200,
+		.defval = 480,
+	},
+	.bpp = {
+		.min = 16,
+		.max = 32,
+		.defval = 16,
+	},
+	.memsize = 8*1024*1024,
+	.probe = cmx270_marathon_probe,
+	.remove = cmx270_marathon_remove,
+};
+
+static struct platform_device cmx270_2700G = {
+	.name		= "mbx-fb",
+	.dev		= {
+		.platform_data	= &cmx270_2700G_data,
+		.dma_mask	= &fb_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(cmx270_2700G_resource),
+	.resource	= cmx270_2700G_resource,
+	.id		= -1,
+};
+
+static void __init cmx270_init_2700G(void)
+{
+	platform_device_register(&cmx270_2700G);
+}
+#else
+static inline void cmx270_init_2700G(void) {}
+#endif
+
+/* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data cmx270_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+};
+
+static void __init cmx270_init_ohci(void)
+{
+	pxa_set_ohci_info(&cmx270_ohci_platform_data);
+}
+#else
+static inline void cmx270_init_ohci(void) {}
+#endif
+
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+static struct pxamci_platform_data cmx270_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO83_MMC_IRQ,
+	.gpio_card_ro		= -1,
+	.gpio_power		= GPIO105_MMC_POWER,
+	.gpio_power_invert	= 1,
+};
+
+static void __init cmx270_init_mmc(void)
+{
+	pxa_set_mci_info(&cmx270_mci_platform_data);
+}
+#else
+static inline void cmx270_init_mmc(void) {}
+#endif
+
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master cm_x270_spi_info = {
+	.num_chipselect	= 1,
+	.enable_dma	= 1,
+};
+
+static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.timeout	= 1000,
+	.gpio_cs	= 14,
+};
+
+static unsigned long cm_x270_libertas_pin_config[] = {
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_GPIO,
+	GPIO87_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+};
+
+static int cm_x270_libertas_setup(struct spi_device *spi)
+{
+	int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+	if (err)
+		return err;
+
+	err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
+	if (err)
+		goto err_free_strap;
+
+	err = gpio_direction_output(GPIO102_WLAN_RST, 0);
+	if (err)
+		goto err_free_strap;
+	msleep(100);
+
+	err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
+	if (err)
+		goto err_free_strap;
+	msleep(100);
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));
+
+	gpio_set_value(GPIO102_WLAN_RST, 1);
+	msleep(100);
+
+	spi->bits_per_word = 16;
+	spi_setup(spi);
+
+	return 0;
+
+err_free_strap:
+	gpio_free(GPIO19_WLAN_STRAP);
+
+	return err;
+}
+
+static int cm_x270_libertas_teardown(struct spi_device *spi)
+{
+	gpio_set_value(GPIO102_WLAN_RST, 0);
+	gpio_free(GPIO102_WLAN_RST);
+	gpio_free(GPIO19_WLAN_STRAP);
+
+	return 0;
+}
+
+struct libertas_spi_platform_data cm_x270_libertas_pdata = {
+	.use_dummy_writes	= 1,
+	.setup			= cm_x270_libertas_setup,
+	.teardown		= cm_x270_libertas_teardown,
+};
+
+static struct spi_board_info cm_x270_spi_devices[] __initdata = {
+	{
+		.modalias		= "libertas_spi",
+		.max_speed_hz		= 13000000,
+		.bus_num		= 2,
+		.irq			= gpio_to_irq(95),
+		.chip_select		= 0,
+		.controller_data	= &cm_x270_libertas_chip,
+		.platform_data		= &cm_x270_libertas_pdata,
+	},
+};
+
+static void __init cmx270_init_spi(void)
+{
+	pxa2xx_set_spi_info(2, &cm_x270_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
+}
+#else
+static inline void cmx270_init_spi(void) {}
+#endif
+
+void __init cmx270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
+
+#ifdef CONFIG_PM
+	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
+	cmx270_init_rtc();
+	cmx270_init_mmc();
+	cmx270_init_ohci();
+	cmx270_init_2700G();
+	cmx270_init_spi();
+}